master of quality engineering and management · 12. kaouther ghachem, lioua kolsi, chemseddine...

College of Engineering, University of Hail. | 2015/2016

المملكـت العربيـت السعىديــــــــــــــت

وزارة التعلــــيــم الـــعـــالــــــــي جـــــامـــعــت حــــــــــــائـــــــــل

كليت الهندست لدراساث العليا والبحج العلميوكالت ا

األبحاث المنشىرة

Publications

2016 ISI:

1. MohamedMahdi Belhaj Brahima, Mohamed Ali Mergheni, Nidhal Ben Khedher, Sassi Ben Nasrallah, Jean Charles Sautet, « Numerical study of hydrogen enrichment effects in oxy-flame turbulent of three separated jets». Applied Thermal Engineering, Volume 113, 25 February 2017, Pages 490–498.

2. Ramzi RZIG, Nidhal BEN KHEDHER, Sassi BEN NASRALLAH, « Three-dimensional simulation of mass and heat transfer during unsaturated porous medium drying». Heat Transfer Research, 2016 (in press)

3. Lioua Kolsi, K.Kalidasan, Abdulaziz Alghamdi, Borjini Mohamed Naceur, P. Rajesh Kanna,Natural

Convectionan Entropy Generation on a Cubical Cavity with Twin Adiabatic Blocks and Filled by

Aluminium Oxide-Water Nanofluid. Numerical Heat Transfer Part A, Vol.70 (3) pp. 242–259 (2016). 4. Lioua Kolsi, Nidal Abu-Hamdeh, Hakan Oztop, Abdulaziz Alghamdi, Borjini Mohamed Naceur, Habib

Ben Aissia,Natural convection and entropy generation in a three dimensional volumetrically heated

and partially divided cavity. International Journal of Numerical Methods for Heat & Fluid Flow, Vol.

26 (8), (2016). 5. Lioua Kolsi; Hakan F. Oztopc; Abdulaziz Alghamdi; Nidal Abu-Hamdehd, Mohamed Naceur Borjini,

Habib Ben Aissia, A computational work on three dimensional analysis of natural convection and

entropy generation in nanofluid filled enclosures with triangular solid insert at the corners, Journal of

Molecular Liquids, Vol. 218 pp. 260–274, (2016). 6. Chemseddine Maatki; Kaouther Ghachem; Kolsi Lioua; Ahmed K Hussein; Mohamed N Borjini; Habib

Ben Aissia, Inclination effects of magnetic field direction in 3D double-diffusive natural convection,

Applied Mathematics and computation. Vol. 273 pp.178–189 (2016). 7. Walid AICH, Lioua KOLSI, Mohamed N. Borjini, Habib Ben Aissia, Hakan F. OZTOP, Nidal Abu-

Hamdehd.Three dımensıonal CFD analysis of buoyancy-driven natural ventilation AND Entropy

generation in A prismatic greenhouse, Thermal science,(In Press), 2016 8. Kolsi Lioua, Numerical Study of natural convection and entropy generation of Al2O3-water nanofluid

within a cavity equipped with a conductive baffle. Journal of Applied Fluid Mechanics, Vol. 9 (5) pp.

2177-2186, 2016 9. Kaouther GHACHEM, Chamseddine MAATKI, Lioua KOLSI, Naif ALSHAMMARI, Hakan F. OZTOP,

Mohamed Naceur BORJINI, Habib BEN AISSIA and Khaled Al-Salem, Numerical study of heat and

mass transfer optimization in a 3D inclined solar distiller, Thermal science, (In press) 2016. 10. Chemseddine Maatki, Walid Hassen, Lioua Kols i, Naif AlShammari, M. Naceur Borjini and Habib Ben

Aissia,3D numerical study of hydromagnetic double diffusive natural convection and entropy

generation in cubic cavity, Journal of Applied Fluid Mechanics, Vol. 9(4), pp 1915-1925, 2016 11. Ahmed Kadhim Hussein, Kolsi Lioua, Ramesh Chand, S.Sivasankaran, Farshid Fathinia, Borjini Mohamed

Naceur, Ben Aïssia Habib,Three-dimensional unsteady natural convection and entropy generation in an

inclined cubical trapezoidal cavity subjected to uniformly heated bottom wall. Alexandria Engineering Journal, Vol. 55, pp. 741–755, 2016

12. Kaouther Ghachem, Lioua Kolsi, Chemseddine Maatki, Abdulaziz Alghamdi, Hakan F. Oztop, Mohamed Naceur Borjini, Habib Ben Aissia, Khaled Al-Salem, Numerical simulation of three-dimensional double diffusive convection in a lid-driven cavity, International Journal of Thermal Science, Vol. 110 pp. 241-250, 2016

Scientific Publications 2016-2017

College of Engineering, University of Hail. | 2

13. Lioua Kolsi, Omid Mahian, Hakan F. Oztop, Walid Aich, Mohamed Naceur Borjini, Nidal Abu-Hamdeh, and Habib Ben Aissia. 3D Buoyancy induced flow and entropy generation of nanofluid filled open cavity having adiabatic diamond shaped obstacle, ENTROPY, Vol. 18(6) 232, 2016

14. Lioua Kolsi, Hakan F. Oztop , Nidal Abu-Hamdeh, Mohamed Naceur Borjini, Habib Ben Aissia, Effects of moving lid direction on mixed convection and entropy generation in a cubical cavity with longitudinal triangular fin insertion. International Journal of Numerical Methods for Heat & Fluid Flow. 2016

15. Lioua Kolsi, Numerical analysis of periodic 3D convective heat transfer in fenestration with between-the-glass louvered blinds, Case Studies in Thermal Engineering, Vol. 8 pp. 71-83, 2016

16. Ahmed Kadhim Hussein, H.R. Ashorynejad, S. Sivasankaran , Lioua Kolsi , M. Shikholeslami, I.K. Adegun, Modeling of MHD natural convection in a square enclosure having an adiabatic square shaped body using Lattice Boltzmann Method, Alexandria Engineering Journal, Vol. 55, pp. 203–214, 2016

17. Lioua Kolsi, Hakan F. Oztop, Nidal Abu-Hamdeh, Abdulaziz Alghamdi, M. Naceur Borjini, Three dimensional analysis of natural convection and entropy generation in a sharp edged finned cavity Alexandria Engineering Journal, Vol.55, pp. 991–1004, 2016

18. Lioua Kolsi, Emtinene Lajnef, Walid Aich, Abdulaziz Alghamdi, Mohamed Ahmed Aichouni, Mohamed Naceur Borjini, Habib Ben Aissia, Numerical investigation of combined buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with Al2O3 nanofluid. Alexandria Engineering

Journal, (In Press) 2016 19. Lioua Kolsi, MHD Mixed Convection And Entropy Generation In A 3d Lid-Driven Cavity, Frontiers in

Heat and Mass Transfer Vol. 7 (26), 20. A. Horimek, N. Ait Messaoudene, W. Aich, M. Aichouni, L. Kolsi, J. Ghernaout, Laminar forced

convection of a pseudoplastic thermodependent fluid in an annular horizontal duct, The Arab Gulf Journal

of Scientific Research (accepted) 2017 21. Mohamed Elashmawy, Lioua Kolsi, Turbulent forced convection heat transfer in triangular cross sectioned

helically coiled tube, International journal of ADVANCED AND APPLIED SCIENCES, Vol. 3(7), pp. 18-23, 2016

22. Mohamed Aichouni, Lioua Kolsi, Noureddine Ait-Messaoudenne, Walid Aich, Computational Study of the Performance of the Etoile Flow Conditioner, International journal of ADVANCED

AND APPLIED SCIENCES Vol. 3(9), pp. 25-30, 2016 23. Mahamid, I. (2016). "Effect of Change Orders on Rework in Highway Projects in Palestine". Accepted

for publication in Journal of Financial and Property Management, Vol 22, issue 1, 2016. Emerald. 24. Mahamid, I. (2016). Micro and Macro Level of Dispute Causes in Residential Building Projects:

Studies of Saudi Arabia. Journal of King Saud University: Engineering Sciences, 28 (1), 12-20. Elsevier.

25. Okasha, N.M. 2016. Reliability-Based Design Optimization of Trusses with Linked-Discrete Design Variables using the Improved Firefly Algorithm. Engineering, Technology & Applied Science Research, EOS Association, 6(2), 964-971.

26. Okasha, N.M. (2016). System Reliability Based Multiobjective Design Optimization of Bridges. Structural Engineering International (SEI), International Association for Bridge and Structural Engineering (IABSE), (Accepted).

27. Okasha, N.M. 2016. A Hybrid Technique for the Efficient Reliability Computation of Large Structures. International Journal of Advanced and Applied Sciences, Institute of Advanced Science Extension (IASE), 3(3), 19-27.

28. Okasha, N.M. 2016. An improved weighted average simulation approach for solving reliability-based analysis and design optimization problems. Structural Safety, Elsevier, 60, 47-55.

29. Okasha, N.M. 2016. Proposed Algorithms for an Efficient System-Reliability Based Design Optimization of Truss Structures. Journal of Computing in Civil Engineering, American Society of Civil Engineers (ASCE), 30(5), (ASCE), CID: 04016008.

30. E. El-Badawi, M. Aichouni, N. Ait-Messaoudene, Developing an Innovative and Creative

Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education, Accepted for Publication in Engineering, Technology & Applied Science Research. (2016)

31. Daoud, S. A., Nehari, D, Aichouni, M and Nehari, T, (2016), Numerical Simulations of an

Oscillating Flow Past an Elliptic Cylinder, Journal of Offshore Mechanics and Arctic

Engineering, Vol. 138, pp. 1-11.



32. Naim Ben Ali, Abdulaziz Salem Alghamdi, Issam Badawi and Mounir

Kanzari, Enhancement and localization of electric field in dielectric photonic crystal

sandwiched between two Bragg-mirrors, IJAAS/ International Journal of ADVANCED

AND APPLIED SCIENCES, Volume 3 (9) , pp 37-43, (2016).

33. Chaudhry, I. A. and Khan A. A., A Research Survey: Review of Flexible Job Shop

Scheduling Techniques, International Transactions in Operational Research (ISSN 0969-

6016), Volume 23, Issue 3, Pages 551–591, May 2016, DOI: 10.1111/itor.12199,(2016). 34. Rihab Asmi, Naim Ben Ali and Mounir Kanzari, Numerical investigation of light

localization in generalized Thue–Morse one-dimensional photonic crystal, SPIE/ Journal

of Photonics for Energy, Vol. 6 (3), (2016). 35. S. Saadaoui, A. Torchani, M. Aziz Ben Youssef, R. Gharbi, Fabrication, modeling and

electrical characterization of natural dye sensitized solar cell under different thermal

stress conditions, Optik-International Journal for Light and Electron Optics. Vol 127,

Issue 20, pp. 10058–10067, D.O.I : 10.1016/j.ijleo.2016.07.092, (2016).

36. Youssef Trabelsi, Yassine Bouazzi, Naim Ben Ali and Mounir Kanzari, Narrow stop band

optical filter using one-dimensional regular Fibonacci/Rudin Shapiro photonic

quasicrystals, Springer/Opt Quant Electron, pp. 48-54/ DOI 10.1007/s11082-015-0295-

y (2016). 37. WAY Yusoff, DT Pham,. K.Dotchev, The Application of Scanning Electron Microscope

(SEM) and Melt flow Index (MFI) to investigate the “orange peel” phenomenon by

employing different quality of Polyamide 12 powder in Laser sintering process, Journal

of Electrical Systems, Engineering and Scientific Research Groups, France, ISSN 1112-

5209 IEEE & SCOPUS , (2016). 38. Mohamed Arbi Khlifi. Study and Control of Photovoltaic Water Pumping System. Journal of

Electrical Engineering and Technology (JEET), Vol.11, No.1, pp.117-124, 2016.

39. Mohamed Arbi Khlifi and Habib Rehaoulia. General modeling of saturated AC machines for

industrial drives", COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 35 Iss: 1, pp.44 - 63 2016.

40. Usman, M., Asif, S. M., Iftikhar, A., Khan, S. M., and Braaten, B. D. (2016), "An E-shaped

microstrip patch antenna for reconfigurable dual-band operation". Microwave and optical technology letters., 58: 1485–1490. doi:10.1002/mop.29814.

41. K. Tlijani, T. Guesmi, H. Hadj Abdallah, Dynamic Coupled Active–Reactive Dispatch Including SVC Devices with Limited Switching Operations, Arab J Sci Eng , 2016.

42. A. Farah, T. Guesmi, H. Hadj Abdallah, A. Ouali, A novel chaotic teaching–learning-based

optimization algorithm for multi-machine power system stabilizers design problem, Electrical Power and Energy Systems 77 (2016) 197–209.

43. K. Tlijani, T. Guesmi, H. Hadj Abdallah , Extended Dynamic Economic Environmental Dispatch using Multi-Objective Particle Swarm Optimization, International Journal on Electrical Engineering and Informatics 8(1), March 2016.

44. M Kchaou, Robust H∞ observer-based control for a class of (TS) fuzzy descriptor systems with time-varying delay, International Journal of Fuzzy Systems , 1-16,

2016.doi: 10.1007/s40815-016-0200-2. 45. M Kchaou and A El-Hajjaji "Resilient H∞ sliding mode control for discrete-time descriptor

fuzzy systems with multiple time delays", International Journal of Systems Science 1-14, May

2016.doi: 10.1080/00207721.2016.1179818 46. H. Al-Kelesh, K.S. Abdel Halim, M. I. Nasr, Synthesis of heavy tungsten alloys via powder

reduction technique, Journal of Materials Research, Vol. 31 (19), pp. 2977-2986, (2016).

http://sci-hub.cc/10.1111/itor.12199%2c

http://sci-hub.cc/10.1016/j.ijleo.2016.07.092%2c

http://sci-hub.cc/10.1007/s11082-015-0295-y

http://sci-hub.cc/10.1007/s11082-015-0295-y

http://link.springer.com/journal/40815

http://dx.doi.org/10.1007/s40815-016-0200-2



47. Badr M. Alshammari, Modeling and control of a doubly fed induction machine (DFIM),

International Journal of Advanced and Applied Sciences, Volume 3, Issue 9 (September

2016), Pages: 6-9

2016 Non ISI :

1. M. Ramadan, N. Fathy, K.S. Abdel Halim, K.M. Hafez, Porosity Defects Induced by Semi-Solid Isothermal Heat Treatment in Cast Hypereutectic Al-18% Si Alloy, Applied Mechanics and

Materials, Vol. 835, pp. 173-178, (2016). 2. K. S. Abdel Halim, M. Ramadan, A. Shawabkeh, and A.S. Alghamdi, Thermal techniques for the

production of Fe-M alloys , Applied Mechanics and Materials Vol. 826 pp 105-110 (2016) . 3. K. M. Hafez, M. Ramadan, N. Fathy, M. Ismail and S. Katayama, A comparative study of laser weld

joints and arc weld joints for automotive industry, Accepted to be published, Materials Science

Forum (2016). 4. Naglaa Fathy, Mohamed Ramadan, Khaled Hafez, Abdulaziz Alghamdi, Khaled Abdel

Halim, Microstructure and Induced Defects of 6061 Al Alloy after Short Times Cyclic Semi-Solid

Heat Treatment, Materials Science Forum, Inpress, (2016). 5. M. Aichouni; R. Al-Hamali; A. Alghamdi; A. Al-Ghonamy; E. Al-Badawi; M. Touahmia and N. Ait-

Messaoudene, Does our Educational System Enhance Creativity and Innovation Among Gifted

Students?, International e -Journal of Advances in Education (IJAEDU), in press, (2016). 6. Lioua Kolsi, 3D numerical analysis of a shell-and-tube heat exchanger, International journal of

engineering sciences & research technology, 5(1) pp 145-163, 2016 7. Ahmed Kadhim Hussein, A.A.Walunj, Lioua Kolsi, applications of nanotechnology to enhance the

performance of the direct absorption solar collectors, Journal of Thermal Engineering, Vol.2(1), pp.529-540 2016

8. Mahamid, I., "Preliminary Estimate for Reinforcement Steel Quantity in Residential Buildings".Accepted for publication in Organization, Technology and Management in Construction: An International Journal, 2016. Zagreb University.

9. Mahamid, I.(2016).Analysis of Rework in Residential Building Projects in Palestine. Jordan Journal of Civil Engineering, Vol. 10, No.2. Jordan University of Science and Technology.

10. Nabil Dmaidi, Ibrahim Mahamid, Inas Shweiki (2016). Identifying the Critical Problems of Construction Contracting Management in Palestine. Jordan Journal of Civil Engineering, Vol. 10, No.1. Jordan University of Science and Technology.

11. Khalifa, W.M.A., Mahamid, I. "Causes of Change Orders in Construction Projects", International Journal of Applied Engineering Research, ISSN: 2040-7459; e-ISSN: 2040-74, Research India Publications, 2016.

12. Khalifa, Walid .M.A. "Simulation of Water Quality for El-Salam Canal in Egypt", WIT Transactions on Ecology and The Environment, Vol. 182, © 2014 WIT Press

13. Derbali M., Fattouh A., Jerbi H. and Abdelkarim M.N, Improved fault detection in water

desalination systems using machine learning techniques, Journal of theoretical and

applied information technology , (2016) . 14. Rihab Asmi, Naim Ben Ali and Mounir Kanzari, Enhancement of Light Localization in

Hybrid Thue-Morse/Periodic Photonic Crystals, Journal of Materials , Volume 2016, ID

9471312,7 pages, (2016). 15. Miraoui I., Boujelbene M., Bayraktar E.,Analysis of cut surface quality of sheet metals

obtained by Laser machining: Thermal effects, Journal of Advances in Materials and

Processing Technologies, pp. 633-642, Taylor & Francis, (2016). 16. WAY Yusoff, A Hadi Mohamad , ,Aesyhah. The application of Rapid Prototyping technology

and Quality Functional Deployment (QFD) approach in enhancing the Endotracheal Tube Holder model in medical application, Applied Mechanics and Materials, Trans Tech

Publications, Switzerland , Publication (Accepted) 2016

http://www.scientific.net/AMM




17. B.M. Alshammari. "Dynamic Environmental/Economic Power Dispatch with Prohibited Zones

using Improved Multi-Objective PSO Algorithm", International Review of Electrical Engineering (I.R.E.E.), Vol. 11, Issue. 4, pp. 411-419, July – August 2016.

18. Yaser Anagreh and Badr Alshammari "Assessment of utilizing stand-alone renewable energy

scenarios to feed a passenger service station in Saudi Arabia", Przegląd Elektrotechniczny, Vol. 11, pp. 221-224, November 2016.

19. B.M. Alshammari, "Assessment Of Reserve Adequacy And Reliability Of Power Systems ", International Journal of Engineering Sciences & Research Technology, Vol. 5, issue. 3, March, 2016, pp. 337-345.

20. B.M. Alshammari, "Optimal Design of Multi-machine Power System Stabilizers using Gbest-guided Artificial Bee Colony Algorithm", International Journal Of Engineering Sciences &

Research Technology, Vol. 5, Issu. 4, pp. 330-338, March 2016. 21. Usman, M., "Design Estimations and Channel Capacity Calculations for Spatial, Polarized

MIMO Antenna System for Mobile Applications". PRZEGLĄD ELEKTROTECHNICZNY,

ISSN 0033-2097, R. 92 NR 6/2016, 154-159. doi:10.15199/48.2016.06.31 22. Mohamed A H Eleiwa, Muhammad Usman, Mohamad Raha1, M.A. Haleem, and M.T.

Chughtai, 'Mechanically Controlled Smart Corner Reflector Antenna System for Cellular Networks', International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:16 No:01. Pp. 141-147, Feb. 2016

23. Chughtai Tajammal M, Muhammad Usman and Tilak Dias, Novel knitted switches for smart clothing using single and double electrodes technology, Przeglad Elektrotechniczny (Electrical

Review), ISSN 0033-2097, R. 92 NR 4/2016. 24. Mohammad et al., Mechanically controlled smart corner reflector antenna system for cellular

networks, International Journal of Mechanical & Mechatronics Engineering, Paper ID: 165601-

2828-IJMME-IJENS, Vol.16, No.1, Feb 2016, pp 141-147. 25. Mohamed Arbi Khlifi. Influence of Cross-Saturation on the Various Models of Induction

Machine. International Journal of Automation and Control Engineering. Vol. 4, No. 4, pp. 268-272, 2016.

26. J. M. Amous, Kinetic Study on Dodecylbenzene Sulfonation in a Mixed Batch

Reactor, Chemical and Materials Engineering, Vol. 4(3), pp. 33-38, (2016).

27. J. M. Amous, Characterization of Fresh Oil Hydro Treating Catalysts, Chemical and

Materials Engineering, Vol. 4(2), pp. 33-38, (2016).

28. Shawabkeh, K. S. Abdel Halim, O. Al-Ayed, Isoconversional Methods for Kinetic Modeling

, Applied Mechanics and Materials, Vol. 835, pp. 299-307, (2016). 29. M. Aichouni, M. Touahmia, A. Al-Ghamdi, N. Ait-Messaoudene, R.M. Al-Hamali, A. Al-Ghonamy

and E. Al-Badawi, Creativity and Innovation among Gifted Saudi Students-An Empirical Study, Procedia - Social and Behavioral Sciences, Volume 195, 3 July 2015, pp. 1371-1379. doi:10.1016/j.sbspro.2015.06.403

http://dx.doi.org/10.1016/j.sbspro.2015.06.403



Scientific Publications per Department

2016 ISI, ME:

48. MohamedMahdi Belhaj Brahima, Mohamed Ali Mergheni, Nidhal Ben Khedher, Sassi Ben Nasrallah, Jean Charles Sautet, « Numerical study of hydrogen enrichment effects in oxy-flame turbulent of three separated jets». Applied Thermal Engineering, Volume 113, 25 February 2017, Pages 490–498.

49. Ramzi RZIG, Nidhal BEN KHEDHER, Sassi BEN NASRALLAH, « Three-dimensional simulation of mass and heat transfer during unsaturated porous medium drying». Heat Transfer Research, 2016 (in press)

50. Lioua Kolsi, K.Kalidasan, Abdulaziz Alghamdi, Borjini Mohamed Naceur, P. Rajesh Kanna,Natural

Convectionan Entropy Generation on a Cubical Cavity with Twin Adiabatic Blocks and Filled by

Aluminium Oxide-Water Nanofluid. Numerical Heat Transfer Part A, Vol.70 (3) pp. 242–259 (2016). 51. Lioua Kolsi, Nidal Abu-Hamdeh, Hakan Oztop, Abdulaziz Alghamdi, Borjini Mohamed Naceur, Habib

Ben Aissia,Natural convection and entropy generation in a three dimensional volumetrically heated

and partially divided cavity. International Journal of Numerical Methods for Heat & Fluid Flow, Vol.

26 (8), (2016). 52. Lioua Kolsi; Hakan F. Oztopc; Abdulaziz Alghamdi; Nidal Abu-Hamdehd, Mohamed Naceur Borjini,

Habib Ben Aissia, A computational work on three dimensional analysis of natural convection and

entropy generation in nanofluid filled enclosures with triangular solid insert at the corners, Journal of

Molecular Liquids, Vol. 218 pp. 260–274, (2016). 53. Chemseddine Maatki; Kaouther Ghachem; Kolsi Lioua; Ahmed K Hussein; Mohamed N Borjini; Habib

Ben Aissia, Inclination effects of magnetic field direction in 3D double -diffusive natural convection, Applied Mathematics and computation. Vol. 273 pp.178–189 (2016).

54. Walid AICH, Lioua KOLSI, Mohamed N. Borjini, Habib Ben Aissia, Hakan F. OZTOP, Nidal Abu-Hamdehd.Three dımensıonal CFD analysis of buoyancy-driven natural ventilation AND Entropy

generation in A prismatic greenhouse, Thermal science,(In Press), 2016 55. Kolsi Lioua, Numerical Study of natural convection and entropy generation of Al2O3-water nanofluid

within a cavity equipped with a conductive baffle. Journal of Applied Fluid Mechanics, Vol. 9 (5) pp.

2177-2186, 2016 56. Kaouther GHACHEM, Chamseddine MAATKI, Lioua KOLSI, Naif ALSHAMMARI, Hakan F. OZTOP,

Mohamed Naceur BORJINI, Habib BEN AISSIA and Khaled Al-Salem, Numerical study of heat and

mass transfer optimization in a 3D inclined solar distiller, Thermal science, (In press) 2016. 57. Chemseddine Maatki, Walid Hassen, Lioua Kols i, Naif AlShammari, M. Naceur Borjini and Habib Ben

Aissia,3D numerical study of hydromagnetic double diffusive natural convection and entropy

generation in cubic cavity, Journal of Applied Fluid Mechanics, Vol. 9(4), pp 1915-1925, 2016 58. Ahmed Kadhim Hussein, Kolsi Lioua, Ramesh Chand, S.Sivasankaran, Farshid Fathinia, Borjini Mohamed

Naceur, Ben Aïssia Habib,Three-dimensional unsteady natural convection and entropy generation in an

inclined cubical trapezoidal cavity subjected to uniformly heated bottom wall. Alexandria Engineering Journal, Vol. 55, pp. 741–755, 2016

59. Kaouther Ghachem, Lioua Kolsi, Chemseddine Maatki, Abdulaziz Alghamdi, Hakan F. Oztop, Mohamed Naceur Borjini, Habib Ben Aissia, Khaled Al-Salem, Numerical simulation of three-dimensional double diffusive convection in a lid-driven cavity, International Journal of Thermal Science, Vol. 110 pp. 241-250, 2016

60. Lioua Kolsi, Omid Mahian, Hakan F. Oztop, Walid Aich, Mohamed Naceur Borjini, Nidal Abu-Hamdeh, and Habib Ben Aissia. 3D Buoyancy induced flow and entropy generation of nanofluid filled open cavity having adiabatic diamond shaped obstacle, ENTROPY, Vol. 18(6) 232, 2016

61. Lioua Kolsi, Hakan F. Oztop , Nidal Abu-Hamdeh, Mohamed Naceur Borjini, Habib Ben Aissia, Effects of moving lid direction on mixed convection and entropy generation in a cubical cavity with longitudinal triangular fin insertion. International Journal of Numerical Methods for Heat & Fluid Flow. 2016

62. Lioua Kolsi, Numerical analysis of periodic 3D convective heat transfer in fenestration with between-the-glass louvered blinds, Case Studies in Thermal Engineering, Vol. 8 pp. 71-83, 2016



63. Ahmed Kadhim Hussein, H.R. Ashorynejad, S. Sivasankaran , Lioua Kolsi , M. Shikholeslami, I.K. Adegun, Modeling of MHD natural convection in a square enclosure having an adiabatic square shaped body using Lattice Boltzmann Method, Alexandria Engineering Journal, Vol. 55, pp. 203–214, 2016

64. Lioua Kolsi, Hakan F. Oztop, Nidal Abu-Hamdeh, Abdulaziz Alghamdi, M. Naceur Borjini, Three dimensional analysis of natural convection and entropy generation in a sharp edged finned cavity Alexandria Engineering Journal, Vol.55, pp. 991–1004, 2016

65. Lioua Kolsi, Emtinene Lajnef, Walid Aich, Abdulaziz Alghamdi, Mohamed Ahmed Aichouni, Mohamed Naceur Borjini, Habib Ben Aissia, Numerical investigation of combined buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with Al2O3 nanofluid. Alexandria Engineering

Journal, (In Press) 2016 66. Lioua Kolsi, MHD Mixed Convection And Entropy Generation In A 3d Lid-Driven Cavity, Frontiers in

Heat and Mass Transfer Vol. 7 (26), 67. A. Horimek, N. Ait Messaoudene, W. Aich, M. Aichouni, L. Kolsi, J. Ghernaout, Laminar forced

convection of a pseudoplastic thermodependent fluid in an annular horizontal duct, The Arab Gulf Journal of Scientific Research (accepted) 2017

68. Mohamed Elashmawy, Lioua Kolsi, Turbulent forced convection heat transfer in triangular cross sectioned helically coiled tube, International journal of ADVANCED AND APPLIED SCIENCES, Vol. 3(7), pp. 18-23, 2016

69. Mohamed Aichouni, Lioua Kolsi, Noureddine Ait-Messaoudenne, Walid Aich, Computational Study of the Performance of the Etoile Flow Conditioner, International journal of ADVANCED

AND APPLIED SCIENCES Vol. 3(9), pp. 25-30, 2016

70. E. El-Badawi, M. Aichouni, N. Ait-Messaoudene, Developing an Innovative and Creative Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education, Accepted for

Publication in Engineering, Technology & Applied Science Research. (2016) 71. Naim Ben Ali, Abdulaziz Salem Alghamdi, Issam Badawi and Mounir Kanzari, Enhancement

and localization of electric field in dielectric photonic crystal sandwiched between two Bragg-mirrors, IJAAS/ International Journal of ADVANCED AND APPLIED SCIENCES, Volume 3 (9) , pp 37-43, (2016).

2016 Non ISI, ME:

1. M. Ramadan, N. Fathy, K.S. Abdel Halim, K.M. Hafez, Porosity Defects Induced by Semi-Solid Isothermal Heat Treatment in Cast Hypereutectic Al-18% Si Alloy, Applied Mechanics and Materials,

Vol. 835, pp. 173-178, (2016). 2. K. S. Abdel Halim, M. Ramadan, A. Shawabkeh, and A.S. Alghamdi, Thermal techniques for the

production of Fe-M alloys , Applied Mechanics and Materials Vol. 826 pp 105-110 (2016) . 3. K. M. Hafez, M. Ramadan, N. Fathy, M. Ismail and S. Katayama, A comparative study of laser weld

joints and arc weld joints for automotive industry, Accepted to be published, Materials Science Forum

(2016). 4. Naglaa Fathy, Mohamed Ramadan, Khaled Hafez, Abdulaziz Alghamdi, Khaled Abdel

Halim, Microstructure and Induced Defects of 6061 Al Alloy after Short Times Cyclic Semi-Solid Heat

Treatment, Materials Science Forum, Inpress, (2016). 5. M. Aichouni; R. Al-Hamali; A. Alghamdi; A. Al-Ghonamy; E. Al-Badawi; M. Touahmia and N. Ait-

Messaoudene, Does our Educational System Enhance Creativity and Innovation Among Gifted

Students?, International e -Journal of Advances in Education (IJAEDU), in press, (2016). 6. Lioua Kolsi, 3D numerical analysis of a shell-and-tube heat exchanger, International journal of

engineering sciences & research technology, 5(1) pp 145-163, 2016 7. Ahmed Kadhim Hussein, A.A.Walunj, Lioua Kolsi, applications of nanotechnology to enhance the

performance of the direct absorption solar collectors, Journal of Thermal Engineering, Vol.2(1), pp.529-540 2016



2016 ISI, CE

1. Mahamid, I. (2016). "Effect of Change Orders on Rework in Highway Projects in Palestine". Accepted for publication in Journal of Financial and Property Management, Vol 22, issue 1, 2016. Emerald.

2. Mahamid, I. (2016). Micro and Macro Level of Dispute Causes in Residential Building Projects: Studies of Saudi Arabia. Journal of King Saud University: Engineering Sciences, 28 (1), 12-20. Elsevier.

3. Okasha, N.M. 2016. Reliability-Based Design Optimization of Trusses with Linked-Discrete Design Variables using the Improved Firefly Algorithm. Engineering, Technology & Applied Science Research, EOS Association, 6(2), 964-971.

4. Okasha, N.M. (2016). System Reliability Based Multiobjective Design Optimization of Bridges. Structural Engineering International (SEI), International Association for Bridge and Structural Engineering (IABSE), (Accepted).

5. Okasha, N.M. 2016. A Hybrid Technique for the Efficient Reliability Computation of Large Structures. International Journal of Advanced and Applied Sciences, Institute of Advanced Science Extension (IASE), 3(3), 19-27.

6. Okasha, N.M. 2016. An improved weighted average simulation approach for solving reliability-based analysis and design optimization problems. Structural Safety, Elsevier, 60, 47-55.

7. Okasha, N.M. 2016. Proposed Algorithms for an Efficient System-Reliability Based Design Optimization of Truss Structures. Journal of Computing in Civil Engineering, American Society of Civil Engineers (ASCE), 30(5), (ASCE), CID: 04016008.

2016 Non ISI, CE

1. Mahamid, I., "Preliminary Estimate for Reinforcement Steel Quantity in Residential Buildings".Accepted for publication in Organization, Technology and Management in Construction: An International Journal, 2016. Zagreb University.

2. Mahamid, I.(2016).Analysis of Rework in Residential Building Projects in Palestine. Jordan Journal of Civil Engineering, Vol. 10, No.2. Jordan University of Science and Technology.

3. Nabil Dmaidi, Ibrahim Mahamid, InasShweiki (2016). Identifying the Critical Problems of Construction Contracting Management in Palestine. Jordan Journal of Civil Engineering, Vol. 10, No.1. Jordan University of Science and Technology.

4. Khalifa, W.M.A., Mahamid, I. "Causes of Change Orders in Construction Projects", International Journal of Applied Engineering Research, ISSN: 2040-7459; e-ISSN: 2040-74, Research India Publications, 2016.

5. Khalifa, Walid .M.A. "Simulation of Water Quality for El-Salam Canal in Egypt", WIT Transactions on Ecology and The Environment, Vol. 182, © 2014 WIT Press

6. M. Aichouni; R. Al-Hamali; A. Alghamdi; A. Al-Ghonamy; E. Al-Badawi; M. Touahmia and N. Ait-Messaoudene, Does our Educational System Enhance Creativity and Innovation Among Gifted

Students?, International e -Journal of Advances in Education (IJAEDU), in press, (2016). 7. M. Aichouni, M. Touahmia, A. Al-Ghamdi, N. Ait-Messaoudene, R.M. Al-Hamali, A. Al-Ghonamy and E.

Al-Badawi, Creativity and Innovation among Gifted Saudi Students-An Empirical Study, Procedia - Social and Behavioral Sciences, Volume 195, 3 July 2015, pp. 1371-1379. doi:10.1016/j.sbspro.2015.06.403

2016 ISI, ISE

1. E. El-Badawi, M. Aichouni, N. Ait-Messaoudene, Developing an Innovative and Creative Hands-

on Lean Six Sigma Manufacturing Experiments for Engineering Education, Accepted for Publication in Engineering, Technology & Applied Science Research. (2016)

2. A. Horimek, N. Ait Messaoudene, W. Aich, M. Aichouni, L. Kolsi, J. Ghernaout, Laminar forced convection of a pseudoplastic thermodependent fluid in an annular horizontal duct, The Arab Gulf

Journal of Scientific Research (accepted) 2017

3. Lioua Kolsi, Emtinene Lajnef, Walid Aich, Abdulaziz Alghamdi, Mohamed Ahmed Aichouni,

Mohamed Naceur Borjini, Habib Ben Aissia, (2016), Numerical investigation of combined




buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with

Al2O3 nanofluid. Alexandria Engineering Journal, (in

press), DOI : 10.1016/j.aej.2016.09.005

4. Mohamed Aichouni, Lioua Kolsi, Noureddine Ait-Messaoudenne, Walid Aich, (2016),

Computational Study of the Performance of the Etoile Flow Conditioner, International

journal of ADVANCED AND APPLIED SCIENCES Vol. 3(9), pp. 25-

30, DOI 10.21833/ijaas.2016.09.005 5. Daoud, S. A., Nehari, D, Aichouni, M and Nehari, T, (2016), Numerical Simulations of an

Oscillating Flow Past an Elliptic Cylinder, Journal of Offshore Mechanics and Arctic

Engineering, Vol. 138, pp. 1-11.

6. Naim Ben Ali, Abdulaziz Salem Alghamdi, Issam Badawi and Mounir Kanzari, Enhancement

and localization of electric field in dielectric photonic crystal sandwiched between two Bragg-

mirrors, IJAAS/ International Journal of ADVANCED AND APPLIED

SCIENCES, Volume 3 (9) , pp 37-43, (2016). 7. Chaudhry, I. A. and Khan A. A., A Research Survey: Review of Flexible Job Shop Scheduling

Techniques, International Transactions in Operational Research (ISSN 0969-6016), Volume

23, Issue 3, Pages 551–591, May 2016, DOI: 10.1111/itor.12199,(2016). 8. Rihab Asmi, Naim Ben Ali and Mounir Kanzari, Numerical investigation of light localization in

generalized Thue–Morse one-dimensional photonic crystal, SPIE/ Journal of Photonics for

Energy, Vol. 6 (3), (2016).

9. S. Saadaoui, A. Torchani, M. Aziz Ben Youssef, R. Gharbi, Fabrication, modeling and

electrical characterization of natural dye sensitized solar cell under different thermal stress

conditions, Optik-International Journal for Light and Electron Optics. Vol 127, Issue 20, pp.

10058–10067, D.O.I : 10.1016/j.ijleo.2016.07.092, (2016). 10. Youssef Trabelsi, Yassine Bouazzi, Naim Ben Ali and Mounir Kanzari, Narrow stop band optical

filter using one-dimensional regular Fibonacci/Rudin Shapiro photonic quasicrystals,

Springer/Opt Quant Electron, pp. 48-54/ DOI 10.1007/s11082-015-0295-y (2016). 11. WAY Yusoff, DT Pham,. K.Dotchev, The Application of Scanning Electron Microscope (SEM)

and Melt flow Index (MFI) to investigate the “orange peel” phenomenon by employing

different quality of Polyamide 12 powder in Laser sintering process, Journal of Electrical

Systems, Engineering and Scientific Research Groups, France, ISSN 1112-5209 IEEE &

SCOPUS , (2016).

2016 Non ISI, ISE

1. Derbali M., Fattouh A., Jerbi H. and Abdelkarim M.N, Improved fault detection in water

desalination systems using machine learning techniques , Journal of theoretical and applied

information technology , (2016) . 2. Rihab Asmi, Naim Ben Ali and Mounir Kanzari, Enhancement of Light Localization in Hybrid

Thue-Morse/Periodic Photonic Crystals, Journal of Materials , Volume 2016, ID 9471312,7

pages, (2016).

3. M. Aichouni; R. Al-Hamali; A. Alghamdi; A. Al-Ghonamy; E. Al-Badawi; M. Touahmia and N. Ait-Messaoudene, Does our Educational System Enhance Creativity and Innovation Among

Gifted Students?, International e-Journal of Advances in Education (IJAEDU), in press,

(2016). 4. Miraoui I., Boujelbene M., Bayraktar E.,Analysis of cut surface quality of sheet metals obtained

by Laser machining: Thermal effects, Journal of Advances in Materials and Processing

Technologies, pp. 633-642, Taylor & Francis, (2016). 5. WAY Yusoff, A Hadi Mohamad , ,Aesyhah. The application of Rapid Prototyping technology and

Quality Functional Deployment (QFD) approach in enhancing the Endotracheal Tube Holder model

http://dx.doi.org/10.1016/j.aej.2016.09.005

https://doi.org/10.21833/ijaas.2016.09.005

http://sci-hub.cc/10.1111/itor.12199%2c

http://sci-hub.cc/10.1016/j.ijleo.2016.07.092%2c

http://sci-hub.cc/10.1007/s11082-015-0295-y



in medical application, Applied Mechanics and Materials, Trans Tech Publications, Switzerland ,

Publication (Accepted) 2016 6. M. Aichouni, M. Touahmia, A. Al-Ghamdi, N. Ait-Messaoudene, R.M. Al-Hamali, A. Al-

Ghonamy and E. Al-Badawi, Creativity and Innovation among Gifted Saudi Students-An

Empirical Study, Procedia - Social and Behavioral Sciences, Volume 195, 3 July 2015, pp. 1371-1379. doi:10.1016/j.sbspro.2015.06.403

Conferences ISE:

1. W A Y Yusoff, M H Shazwan, A H Mohamed,Saufi Awang, Application of Rapid Prototyping in

Redesigning the Roller Calmp Intravenous Tubing in Medical Application, Advanced Processes and Systems in Manufacturing ,KualaLumpur August (2016).

2. Yusoff Way, M. Aichouni; Issam Badawi, Mohamad Boujelbene, A survey on the implementation of Total Quality Management (TQM) at manufacturing industries in north region, Kingdom of Saudi Arabia, Institute of Electrical and Electronics Engineers XPlore, pp84 – 88,

London, United Kingdom, ISBN: 978-1-5090-1470, (2016).

2016 ISI, EE

1. Mohamed Arbi Khlifi. Study and Control of Photovoltaic Water Pumping System. Journal of Electrical Engineering and Technology (JEET), Vol.11, No.1, pp.117-124, 2016.

2. Mohamed Arbi Khlifi and Habib Rehaoulia. General modeling of saturated AC machines for industrial drives", COMPEL: The International Journal for Computation and Mathematics in

Electrical and Electronic Engineering, Vol. 35 Iss: 1, pp.44 - 63 2016.

3. Usman, M., Asif, S. M., Iftikhar, A., Khan, S. M., and Braaten, B. D. (2016), "An E-shaped microstrip patch antenna for reconfigurable dual-band operation". Microwave and optical

technology letters., 58: 1485–1490. doi:10.1002/mop.29814. 4. K. Tlijani, T. Guesmi, H. Hadj Abdallah, Dynamic Coupled Active–Reactive Dispatch Including

SVC Devices with Limited Switching Operations, Arab J Sci Eng , 2016.

5. A. Farah, T. Guesmi, H. Hadj Abdallah, A. Ouali, A novel chaotic teaching–learning-based optimization algorithm for multi-machine power system stabilizers design problem, Electrical

Power and Energy Systems 77 (2016) 197–209. 6. K. Tlijani, T. Guesmi, H. Hadj Abdallah , Extended Dynamic Economic Environmental Dispatch

using Multi-Objective Particle Swarm Optimization, International Journal on Electrical Engineering

and Informatics 8(1), March 2016. 7. M Kchaou, Robust H∞ observer-based control for a class of (TS) fuzzy descriptor systems with

time-varying delay, International Journal of Fuzzy Systems , 1-16, 2016.doi: 10.1007/s40815-016-0200-2.

8. M Kchaou and A El-Hajjaji "Resilient H∞ sliding mode control for discrete-time descriptor fuzzy

systems with multiple time delays", International Journal of Systems Science 1-14, May 2016.doi: 10.1080/00207721.2016.1179818.

9. Badr M. Alshammari, Modeling and control of a doubly fed induction machine (DFIM), International Journal of Advanced and Applied Sciences, Volume 3, Issue 9 (September

2016), Pages: 6-9



http://link.springer.com/journal/40815

http://dx.doi.org/10.1007/s40815-016-0200-2

http://dx.doi.org/10.1007/s40815-016-0200-2



2016 Non ISI, EE

1. B.M. Alshammari. "Dynamic Environmental/Economic Power Dispatch with Prohibited Zones

using Improved Multi-Objective PSO Algorithm", International Review of Electrical Engineering (I.R.E.E.), Vol. 11, Issue. 4, pp. 411-419, July – August 2016.

2. Yaser Anagreh and Badr Alshammari "Assessment of utilizing stand-alone renewable energy scenarios to feed a passenger service station in Saudi Arabia", Przegląd Elektrotechniczny, Vol. 11, pp. 221-224, November 2016.

3. B.M. Alshammari, "Assessment Of Reserve Adequacy And Reliability Of Power Systems ", International Journal of Engineering Sciences & Research Technology, Vol. 5, issue. 3, March,

2016, pp. 337-345. 4. B.M. Alshammari, "Optimal Design of Multi-machine Power System Stabilizers using Gbest-

guided Artificial Bee Colony Algorithm", International Journal Of Engineering Sciences &

Research Technology, Vol. 5, Issu. 4, pp. 330-338, March 2016. 5. Usman, M., "Design Estimations and Channel Capacity Calculations for Spatial, Polarized MIMO

Antenna System for Mobile Applications". PRZEGLĄD ELEKTROTECHNICZNY, ISSN 0033-2097, R. 92 NR 6/2016, 154-159. doi:10.15199/48.2016.06.31

6. Mohamed A H Eleiwa, Muhammad Usman, Mohamad Raha1, M.A. Haleem, and M.T. Chughtai,

'Mechanically Controlled Smart Corner Reflector Antenna System for Cellular Networks', International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:16 No:01. Pp.

141-147, Feb. 2016 7. Chughtai Tajammal M, Muhammad Usman and Tilak Dias, Novel knitted switches for smart

clothing using single and double electrodes technology, Przeglad Elektrotechniczny (Electrical

Review), ISSN 0033-2097, R. 92 NR 4/2016. 8. Mohammad et al., Mechanically controlled smart corner reflector antenna system for cellular

networks, International Journal of Mechanical & Mechatronics Engineering, Paper ID: 165601-

2828-IJMME-IJENS, Vol.16, No.1, Feb 2016, pp 141-147. 9. Mohamed Arbi Khlifi. Influence of Cross-Saturation on the Various Models of Induction Machine.

International Journal of Automation and Control Engineering. Vol. 4, No. 4, pp. 268-272, 2016.

Conferences EE:

1. B.M. Alshammari, R. Abbassi and M.A. Khlifi, " Interfacing Photovoltaic Systems to the Utility Grid: A Comparative Simulation Study To Mitigate the Impact of Unbalanced Voltage Dips ",

ICEC 2016 World Academy of Science, Engineering and Technology, Vol. 10, No.3, March 23-25, 2016, pp. 385-389.

2016 ISI, CHE

1. H. Al-Kelesh, K.S. Abdel Halim, M. I. Nasr, Synthesis of heavy tungsten alloys via powder

reduction technique, Journal of Materials Research, Vol. 31 (19), pp. 2977-2986, (2016). 2. A. Horimek, N. Ait Messaoudene, W. Aich, M. Aichouni, L. Kolsi, J. Ghernaout, Laminar forced

convection of a pseudoplastic thermodependent fluid in an annular horizontal duct, The Arab Gulf

Journal of Scientific Research (accepted) 2017

2016 Non ISI, CHE

1. J. M. Amous, Kinetic Study on Dodecylbenzene Sulfonation in a Mixed Batch

Reactor, Chemical and Materials Engineering, Vol. 4(3), pp. 33-38, (2016).



2. J. M. Amous, Characterization of Fresh Oil Hydro Treating Catalysts, Chemical and

Materials Engineering, Vol. 4(2), pp. 33-38, (2016).

3. Shawabkeh, K. S. Abdel Halim, O. Al-Ayed, Isoconversional Methods for Kinetic Modeling

, Applied Mechanics and Materials, Vol. 835, pp. 299-307, (2016).

4. M. Ramadan, N. Fathy, K.S. Abdel Halim, K.M. Hafez, Porosity Defects Induced by Semi-Solid

Isothermal Heat Treatment in Cast Hypereutectic Al-18% Si Alloy, Applied Mechanics and

Materials, Vol. 835, pp. 173-178, (2016). 5. K. S. Abdel Halim, M. Ramadan, A. Shawabkeh, and A.S. Alghamdi, Thermal techniques for

the production of Fe-M alloys, Applied Mechanics and Materials Vol. 826, pp. 105-

110, (2016). 6. Naglaa Fathy, Mohamed Ramadan, Khaled Hafez, Abdulaziz Alghamdi, Khaled Abdel

Halim, Microstructure and Induced Defects of 6061 Al Alloy after Short Times Cyclic Semi-

Solid Heat Treatment, Materials Science Forum, Inpress, (2016).

2016 NON ISI ARE

1. M. Aichouni; R. Al-Hamali; A. Alghamdi; A. Al-Ghonamy; E. Al-Badawi; M. Touahmia

and N. Ait-Messaoudene, Does our Educational System Enhance Creativity and

Innovation Among Gifted Students?, International e-Journal of Advances in Education

(IJAEDU), in press, (2016).

2. M. Aichouni, M. Touahmia, A. Al-Ghamdi, N. Ait-Messaoudene, R.M. Al-Hamali, A. Al-

Ghonamy and E. Al-Badawi, Creativity and Innovation among Gifted Saudi Students-An

Empirical Study, Procedia - Social and Behavioral Sciences, Volume 195, 3 July 2015, pp. 1371-1379. doi:10.1016/j.sbspro.2015.06.403




Scientific Publications per Department

0

10

20

30

40

50

47

29

Nu

mb

er o

f p

aper

s

ISI

NON-ISI

ISI

NO

N-I

SI

CoE-2016-Publications

0

5

10

15

20

25

30

35

ARE CHE ISE ME CE EE

0 2

11

24

7 9

2

6

6

7

79

Nu

mb

er

of

pap

ers

Non-ISI

ISI

CoE-2016-Publications/Dept



0

0.5

1

1.5

2

Dr.Al-Ghonamy

2N

um

be

r o

f p

ape

rs

NON-ISI

ISI

CoE-2016-Publications-ARE/Dr

0

0.5

1

1.5

2

2.5

3

3.5

4

4.5

5

2

1

3

2

1

0 0 0 0 0

1 3

0

0

4

1 1 1 1 1

Nu

mb

er

of

pap

ers

NON-ISI

ISI

CoE-2016-Publications-EE/Dr



0

5

10

15

20

25

2

20

75

30 0 1 2

0

2

3

01

4 3 00

Nu

mb

er

of

pap

ers

NON-ISI

ISI

CoE-2016-Publications-ME/Dr

0

1

2

3

4

5

6

Dr.Mahamid Dr.Okasha Dr.Khalifa Dr. Touahmia

2

5

0 0

4

0

2 2Nu

mb

er

of

pap

ers

NON-ISI

ISI

CoE-2016-Publications-CE/Dr

0

0.5

1

1.5

2

2.5

3

3.5

4

4.5

5

Dr.Abdel Halim Dr.Ghernaout Dr.Amous Dr.Shawabkeh

1 1

0 0

4

0 2 2

Nu

mb

er

of

pap

ers

NON-ISI

ISI

CoE-2016-Publications-CHE/Dr



0

1

2

3

4

5

6

7

2

5

3

1 10 0

2

2

1

01

1 1

Nu

mb

er

of

pap

ers

NON-ISI

ISI

CoE-2016-Publications-ISE/Dr

master of quality engineering and management · 12. kaouther ghachem, lioua kolsi, chemseddine...

Documents