Version 9 to X Function Map

(Updated September 2010)

Mastercam Version 9 Mastercam XAnalyze-Angle Analyze, AngleAnalyze-Between points Analyze, DistanceAnalyze-Chain Analyze, ChainAnalyze-Contour Analyze, ContourAnalyze-Dynamic Analyze, DynamicAnalyze-Number Analyze, Number/Database, NumberAnalyze-Only Analyze with Masking from General selection ribbon barAnalyze-Point Analyze, PositionAnalyze-Area/volume Analyze, Volume/Area, 2D Area

Analyze, Volume/Area, Surface AreaAnalyze, Volume/Area, Solid properties

Analyze

1

Mastercam Version 9 Mastercam XAnalyze-Surfaces-Base Surfs Analyze, Test Surfaces and Solids, Test SurfacesAnalyze-Surfaces-Check Model Analyze, Test Surfaces and Solids, Check SolidAnalyze-Surfaces-Check Solid Analyze, Test Surfaces and Solids, Check SolidAnalyze-Surfaces-Curvature Analyze, DynamicAnalyze-Surfaces-Set Normals Edit, Set normal

Edit, Change normalAnalyze-Surfaces-Small Surfs Analyze-Surfaces-Test Normals

Analyze, Test Surfaces and Solids, Test SurfacesAnalyze, Test Surfaces and Solids, Test Surfaces

2

Analyze Surfaces

Mastercam Version 9 Mastercam XAttributes Status bar, Attributes

Mastercam Version 9 Mastercam XAutoCursor (Toggle) AutoCursor settings dialog box, or hold [Ctrl] when picking an

AutoCursor position Automatic Centerlines – Screen, Configure, CAD Settings, Centerlines (arcs)

Settings, Configuration, CAD settings

3

Attributes, AutoCursor, Automatic Centerlines

Mastercam Version 9 Mastercam XCplane Status Bar, PlanesCplane –3D Status Bar, Replaced with 2D / 3D modeCplane-Back Status Bar, Planes, Back (WCS)Cplane-Bottom Status Bar, Planes, Bottom (WCS)Cplane-DZ(-) Status Bar, Planes, Lathe DiameterCplane-DZ(+) Status Bar, Planes, Lathe DiameterCplane-Entity Status Bar, Planes, Planes by geometryCplane-Equals Gview Status Bar, Planes, Planes = GviewCplane-Equals Tplane Status Bar, PlanesCplane-Front Status Bar, Planes, Top (WCS)Cplane-Last Status Bar, Planes, Last planesCplane-Left Status Bar, Planes, Left (WCS)Cplane-Mouse RemovedCplane-Named Status Bar, Planes, Named Views…Cplane-Normal Status Bar, Planes, Planes by normalCplane-Number RemovedCplane-Origin Status Bar, PlanesCplane-Rotate Status Bar, Planes, Rotate planesCplane-Side Status Bar, PlanesCplane-Top Status Bar, Planes, Top (WCS)Cplane-XZ(-) Status Bar, Planes, Lathe radiusCplane-XZ(+) Status Bar, Planes, Lathe radius

4

Cplanes

Mastercam Version 9 Mastercam XCreate-Arc-3 points Create, Arc, Arc 3 pointsCreate-Arc-Endpoints Create, Arc, Arc EndpointsCreate-Arc-Polar-Center Point Create, Arc, Arc PolarCreate-Arc-Polar-End Point Create, Arc, Arc Polar EndpointsCreate-Arc-Polar-Sketch Create, Arc, Arc PolarCreate-Arc-Polar-Start Point Create, Arc, Arc Polar EndpointsCreate-Arc-Tangent-1 Entity Create, Arc, Arc TangentCreate-Arc-Tangent-2 Entities Create, Arc, Circle Edge Point / Arc TangentCreate-Arc-Tangent-3 Entities Create, Arc, Circle Edge Point / Arc TangentCreate-Arc-Tangent-Center Line Create, Arc, Arc TangentCreate-Arc-Tangent-Dynamic Create, Arc, Arc TangentCreate-Arc-Tangent-Point Create, Arc, Arc TangentCreate-Bounding Box Create, Bounding BoxCreate-Chamfer Create, Chamfer, Entities and Create, Chamfer, ChainsCreate-Circle-2 Points Create, Arc, Circle Edge PointCreate-Circle-3 Points Create, Arc, Circle Edge PointCreate-Circle-Point/Diameter Create, Arc, Circle Center PointCreate-Circle-Point/Edge Create, Arc, Circle Center PointCreate-Circle-Point/Radius Create, Arc, Circle Center Point

5

Create Arc, Create Bounding Box, Create Chamfer, Create Circle

Mastercam Version 9 Mastercam XCreate-Curve-All Edges Create, Curve, Curve on All EdgesCreate-Curve-Const Parameter Create, Curve, Constant Parameter CurveCreate-Curve-Dynamic Create, Curve, Dynamic CurveCreate-Curve-Flowline Create, Curve, Flowline CurveCreate-Curve-Intersect Create, Curve, Curve at IntersectionCreate-Curve-One Edge Create, Curve, Curve on One EdgeCreate-Curve-Parting Line Create, Curve, Part Line CurveCreate-Curve-Patch Boundaries Removed - Use Curve on All EdgesCreate-Curve-Project Removed - Use Xform ProjectCreate-Curve-Slice Create, Curve, Curve Slice

6

Create Curve

Mastercam Version 9 Mastercam XCreate-Dimension-Angular Create, Drafting, Dimension, AngularCreate-Dimension-Baseline Create, Drafting, Dimension, BaselineCreate-Dimension-Chained Create, Drafting, Dimension, ChainedCreate-Dimension-Circular Create, Drafting, Dimension, CircularCreate-Dimension-Horizontal Create, Drafting, Dimension, HorizontalCreate-Dimension-Ordinate Create, Drafting, Dimension, OrdinateCreate-Dimension-Parallel Create, Drafting, Dimension, ParallelCreate-Dimension-Point Create, Drafting, Dimension, PointCreate-Dimension-Vertical Create, Drafting, Dimension, VerticalCreate-Drafting-Hatch Create, Drafting, X-HatchCreate-Drafting-Label Create, Drafting, NoteCreate-Drafting-Leader Create, Drafting, LeaderCreate-Drafting-Multi edit Create, Drafting, Multi-editCreate-Drafting-Note Create, Drafting, NoteCreate-Drafting-Witness Line Create, Drafting, Witness LineCreate, Next Menu-Ellipse Create, Ellipse

7

Create Dimension/Drafting, Create Ellipse

Mastercam Version 9 Mastercam XCreate-Fillet-2 Entities Create, Fillet, EntitiesCreate-Fillet-Chain Create, Fillet ChainsCreate, Next Menu-Letters Create, Letters

8

Create Fillet, Create Letters

Mastercam Version 9 Mastercam XCreate-Line-Bisect Create, Line, BisectCreate-Line-Closest Create, Line, ClosestCreate-Line-Endpoints Create, Line, EndpointCreate-Line-Horizontal Create, Line, EndpointCreate-Line-Multi Create, Line, EndpointCreate-Line-Parallel-Arc Create, Line, ParallelCreate-Line-Parallel-Dist/Side Create, Line, ParallelCreate-Line-Parallel-Point Create, Line, ParallelCreate-Line-Perpendicular Create, Line, PerpendicularCreate-Line-Perpendicular-Arc Create, Line, PerpendicularCreate-Line-Perpendicular-Pt Create, Line, PerpendicularCreate-Line-Polar Create, Line, EndpointCreate-Line-Tangent Create, Line, EndpointCreate-Line-Tangent-2 Arcs Create, Line, EndpointCreate-Line-Tangent-Angle Create, Line, EndpointCreate-Line-Tangent-Point Create, Line, Tangent through pointCreate-Line-Vertical Create, Line, Endpoint

Mastercam Version 9 Mastercam XCreate, Next Menu-Pattern File, File Merge/Pattern

9

Create Line

Mastercam Version 9 Mastercam XCreate-Point-Along Entity Create, Point, SegmentCreate-Point-Bolt Circle Create, Create-Point-Cpts NURBS Create, Point, Node PointsCreate-Point-Dynamic Create, Point, DynamicCreate-Point-Grid Removed - Use Xform ArrayCreate-Point-Length Create, Point, SegmentCreate-Point-Node Points Create, Point, Node PointsCreate-Point-Perpendicular Create, Point, DynamicCreate-Point-Position Create, Point, PositionCreate-Point-Slice Removed - Use Curve SliceCreate-Point-Small Circles Create, Point, Small ArcsCreate-Point-Surface Project Xform, ProjectCreate-Polygon Create, Polygon

10

Create Point, Create Polygon

Mastercam Version 9 Mastercam XCreate-Rectangle Create, RectangleCreate-Rectangle-1 Point Create, Rectangular ShapesCreate-Rectangle-2 Points Create, Rectangular ShapesCreate-Spiral/Helix Create, Spiral and Create, HelixCreate-Surface-2 Surface Blend Create, Surface, 2-Surface BlendCreate-Surface-3 Surface Blend Create, Surface, 3-Surface BlendCreate-Surface-Coons Removed - Create, Surface, Net

Surface

Note: The C-Hook CoonsSurf.dll can be used to create V9 style coons surfaces.

11

Create Rectangle, Create Surface

Mastercam Version 9 Mastercam XCreate-Surface-Draft Create, Surface, DraftCreate-Surface-Fillet Blend Create, Surface, 3-Fillet Blend Create-Surface-Fillet Create, Surface, Fillet To Curves;

Create, Surface, Fillet, To Surfaces;Create, Surface, Fillet, To Plane;

Create-Surface-From Solid Create, Surface, From SolidCreate-Surface-Loft Create, Surface, Ruled/Lofted Create-Surface-Offset Create, Surface, OffsetCreate-Surface-Primitive Create, Primitives (same command for surface or solid primitives)Create-Surface-Revolved Create, Surface, Revolved Create-Surface-Ruled Create, Surface, Ruled/Lofted Create-Surface-Swept Create, Surface, SweptCreate-Surface-Trim Create, Surface, Trim SurfaceCursor Tracking (Toggle) Removed - Cursor tracking is always on when AutoCursor is active.

12

Create Surface

Mastercam Version 9 Mastercam XDelete Edit, Delete, Delete entitiesDelete-All Edit, Delete, Delete entities, then use the All mask in General SelectionDelete-Chain Delete, Chain in General SelectionDelete-Duplicate Delete Duplicates and Delete Duplicates Advanced

Delete-Group Edit, Delete, Delete entities, then use the All mask in General SelectionDelete-Only Edit, Delete, Delete entities, then use the Only mask in General Selection.Delete-Result Edit, Delete, Delete entities, then use the All mask in General SelectionDelete-Undelete Edit, Delete, Undelete EntityDelete-Undelete-Single Edit, Delete, Undelete EntityDelete-Window General Select w/ Delete

13

Delete

Mastercam Version 9 Mastercam XDraft-Globals Create, Drafting, OptionsDraft-Regenerate-All Create, Drafting, Regen, AllDraft-Regenerate-Auto (Toggle)

Create, Drafting, Regen, Automatic

Draft-Regenerate-Selected Create, Drafting, Regen, SelectDraft-Regenerate-Validate Create, Drafting, Regen, Validate

Mastercam Version 9 Mastercam XEntity Attributes (Apply) Status Bar, AttributesEntity Attributes Manager Status Bar, Attributes, EA Manager buttonExecute C-Hook Settings, Run User Application or [Alt+C]

14

Draft Attributes

Mastercam Version 9 Mastercam XFile-AutoSave Settings, Configuration, Expand Files, AutoSave /

Backup pageFile-Browse RemovedFile-Communications Toolpath Manager, Post selected operations,

select Send to Machine, Communications button. File-Convert File, OpenFile-Convert-ASCII File, OpenFile-Convert-AutoDesk File, OpenFile-Convert-CADL File, OpenFile-Convert-DXF (pre-V9) File, OpenFile-Convert-IGES File, OpenFile-Convert-VDA File, OpenFile-DOS Shell RemovedFile-Edit File, Edit/Open ExternalFile-Get File, OpenFile-Hardcopy File, PrintFile-Merge Edit, PasteFile-New File, NewFile-RAMsaver Settings, Ram saver, Wireframe and Shaded

options on toolbar.Screen, Shade Settings

File-Renumber Toolpath Manager right-click menu, Edit selected operations, Renumber tools.

15

File

Mastercam Version 9 Mastercam X

Fulltime Shading (Toggle)

16

Screen Surface Display

17

Mastercam Version 9 Mastercam XGroups Status Bar, GroupsGview Status Bar, GviewGview-Back Status Bar, Gview, Back GviewGview-Bottom Status Bar, Gview, Bottom GviewGview-Dynamic Pan Status Bar, GviewGview-Dynamic Zoom Status Bar, GviewGview-Dynamic Status Bar, GviewGview-Entity Status Bar, GviewGview-Equals Cplane Status Bar, Gview, Gview = CplaneGview-Equals Tplane Status Bar, Gview, Gview = TplaneGview-Front Status Bar, Gview, Front GviewGview-Isometric Status Bar, Gview, Isometric GviewGview-Last Status Bar, Gview, Previous ViewGview-Left Status Bar, Gview, Left GviewGview-Mouse Status bar, GviewGview-Named Status Bar, Gview, Named ViewsGview-Normal Status Bar, Gview, ViewGview-Number RemovedGview-Rotate Status Bar, GviewGview-Side Status Bar, GviewGview-Top Status Bar, Gview, Top Gview

Groups, Gview

18

Mastercam Version 9 Mastercam XHelp Help, Contents

Mastercam Version 9 Mastercam XHide Screen, Hide EntityHide-Unhide Some Screen, Unhide SomeHide-Hide More Screen, Hide More

Help, Hide

19

Mastercam Version 9 Mastercam XLevel-Level Manager Status Bar, LevelLevels-Main Status Bar, LevelLevels-Mask Status Bar, Level ManagerLevels-Report Status Bar, Level ManagerLevels-Visible Status Bar, Level ManagerList Files RemovedList Memory Removed

Mastercam Version 9 Mastercam XMacro-Pause (Toggle) Settings, Macro ManagerMacro-Playback (Toggle) Settings, Macro ManagerMacro-Record (Toggle) Settings, Macro ManagerMain Color Status BarMenu Font Removed

Levels, List, Macro, Main Color, Menu Font

20

Mastercam Version 9 Mastercam XModify-Break-2 Pieces Edit, Trim / Break, Break Two PiecesModify-Break-Arcs Edit, Trim / Break, Break CirclesModify-Break-At Length Edit, Trim / Break, Trim / Break / ExtendModify-Break-Cdata/Line RemovedModify-Break-Draft/Line Edit, Trim / Break, Break Drafting into LinesModify-Break-Hatch/Line Edit, Trim / Break, Break Drafting into LinesModify-Break-Many Pieces and Modify Break-Splto Arcs

Edit, Trim / Break, Break Many Pieces

Modify-Convert to Arcs Edit, SimplifyModify-Cpts NBS Edit, Modify SplineModify-Drag Xform, Xform DragModify-Drag-Note Moved to Xform, DragModify-Extend Edit, Trim / Break / ExtendModify-Join Edit, Join entitiesModify-Normal Edit, Change and Edit, Set

Modify

21

Mastercam Version 9 Mastercam XModify-Surface-Extend Create, Surface, ExtendModify-Surface-Remove Bndy Create, Surface, Remove BoundaryModify-Surface-Split Create, Surface, SplitModify-Surface-Trim-Flat Bndy Create, Surface, Flat BoundaryModify-Surface-Trim-To Curves Create, Surface, Trim, To CurvesModify-Surface-Trim-To Plane Create, Surface, Tri, Trim To PlaneModify-Surface-Trim-To Surfs Create, Surface, Trim, To SurfacesModify-Surface-Untrim Create, Surface, Un-trimModify-Trim-1 Entity Edit, Trim / Break, Trim / Break / ExtendModify-Trim-2 Entities Edit, Trim / Break, Trim / Break / ExtendModify-Trim-3 Entities Edit, Trim / Break, Trim / Break / ExtendModify-Trim-Close Arc Edit, Trim / Break, Close arcModify-Trim-Divide Edit, Trim / Break, Trim / Break / ExtendModify-Trim-Many Edit, Trim / Break, Trim ManyModify-Trim-To Point Edit, Trim / Break, Trim / Break / ExtendModify-X to NURBS Edit, Convert NURBS

Modify

22

Mastercam Version 9 Mastercam XNC Utils-Backplot Toolpath Manager

NC Utils-Post Toolpath Manager, Post Selected OperationsNC Utils-Post-Change Settings, Control Definition Manager – assigns the post to the control.

Settings, Machine Definition Manager- changes the active post.NC Utils-Post-Reverse RemovedNC Utils-Define Tools Toolpaths, Tool ManagerNC Utils-Filter RemovedNC Utils-Post-Run RemovedNC Utils-Setup Sheet Toolpath Manager, right-click, Setup sheetNC Utils-Verify Toolpath Manager, Verify

Prompt Visible (Toggle) Removed

NC Utils, Prompt

23

Mastercam Version 9 Mastercam XScreen - Clear colors Screen, Clear ColorsScreen-Blank, Screen-Unblank Screen, BlankScreen-Center View, Zoom targetScreen-Change Attributes Analyze, Entity Properties, or right-click in the Status BarScreen-Change Colors Analyze, Entity PropertiesScreen-Change Levels Analyze, Entity PropertiesScreen-Combine Views Screen, Combine ViewsScreen-Configure Settings, ConfigurationScreen-Display info Settings, Customize, Screen category, Display

screen info – icon only Screen-Draw axes Settings, Customize, Screen category, Display

WCS T/C planes axes – icon only Screen-Draw Toolpath RemovedScreen-Endpoints Create, Point, EndpointsScreen-Fit View, FitScreen-Grid Screen, GridScreen-Plot File, PrintScreen-Regenerate Screen, RegenerateScreen-Repaint Screen, RepaintScreen-Statistics Screen, StatisticsScreen-Surf Disp Screen, Shading settingsScreen-Surf Disp-Shading Screen, Shading settings

Screen

24

Mastercam Version 9 Mastercam XScreen-Surf Disp-Studio Screen, Shading Settings Screen-To Clipboard Settings, Customize, Screen category,

Copy screen image to clipboard- icon onlyScreen-Unzoom by 0.8 View, Unzoom .8Screen-Unzoom View, Un-zoom Previous / .5; View, Un-zoom .8Screen-Zoom View, Zoom Window, Zoom TargetScreen-Viewports View, Viewports

Screen

25

Mastercam Version 9 Mastercam XSolids-Boolean Solid, Boolean Add

Solid, Boolean RemoveSolid, Boolean Common

Solids-Chamfer Solid, ChamferSolids-Draft face Solid, Draft FacesSolids-Extrude Solid, ExtrudeSolids-Fillet Solid, FilletSolids-Find features Solid, Find FeaturesSolids-Layout Solid, LayoutSolids-Loft Solid, LoftSolids-Remove faces Solid, Remove FacesSolids-Revolve Solid, RevolveSolids-Shell Solid, ShellSolids-Sweep Solid, SweepSolids-Thicken Solid, ThickenSolids-Trim Solid, TrimSolids-Primitive Create, PrimitivesToolbar Visible (Toggle) Settings, Customize, Toolbars tab

Solids, Toolbar

26

Mastercam Version 9 Mastercam XToolpaths-Operations Manager Main InterfaceToolpaths-Job Setup Toolpath Manager, Machine Group PropertiesToolpaths-New Toolpath Manager, Delete allToolpaths-Circle tlpths Toolpaths, Circle PathsToolpaths-Contour Toolpaths, Contour Toolpaths-Curve 5 Axis Toolpaths, MultiaxisToolpaths-Drill 5 Axis Toolpaths, MultiaxisToolpaths-Drill Toolpaths, DrillToolpaths-Flow 5 Axis Toolpaths, MultiaxisToolpaths-Import NCI Toolpaths, Import NCIToolpaths-Manual Entry Toolpaths, Manual EntryToolpaths-Pocket Toolpaths, PocketToolpaths-Point Toolpaths, PointToolpaths-Project ToolpathsToolpaths-Surface Toolpaths, Surface Rough;

Toolpaths, Surface FinishToolpaths-Rotary 4 Axis Toolpaths, MultiaxisToolpaths-Solid Drill Toolpaths, DrillToolpaths-Swarf 5 Axis Toolpaths, MultiaxisToolpaths-Transform Toolpaths, TransformToolpaths-Trim Toolpaths, TrimToolpaths-Wireframe Toolpaths, Wireframe

Toolpaths

27

Mastercam Version 9 Mastercam XToolpaths-Canned Toolpaths, CannedToolpaths-C-axis Toolpaths, C-axis Toolpaths-Cutoff Toolpaths, CutoffToolpaths-Drill Toolpaths, DrillToolpaths-Face Toolpaths, FaceToolpaths-Finish Toolpaths, FinishToolpaths-Groove Toolpaths, GrooveToolpaths-Manual Ent Toolpaths, Manual EntryToolpaths-Mill Toolpaths, MillToolpaths-Misc. Ops Toolpaths, Misc OpsToolpaths-Point Toolpaths, PointToolpaths-Quick Toolpaths, QuickToolpaths-Rough Toolpaths, RoughToolpaths-Thread Toolpaths, ThreadToolpaths-Transform Toolpaths, Transform

Toolpaths

28

Mastercam Version 9 Mastercam XToolpaths-Block Drill Toolpaths, Block DrillingToolpaths-Circ tlpths Toolpaths, Circle PathsToolpaths-Contour Toolpaths, ContourToolpaths-Drill Toolpaths, DrillToolpaths-Engraving Toolpaths, EngravingToolpaths-Face Toolpaths, FaceToolpaths-Import NCI Toolpaths, Import NCIToolpaths-Manual ent Toolpaths, Manual EntryToolpaths-Multiaxis Toolpaths, MultiaxisToolpaths-Point Toolpaths, PointToolpaths-Pocket Toolpaths, PocketToolpaths-Project ToolpathsToolpaths-Surface Toolpaths, Surface Rough

Toolpaths, Surface FinishToolpaths-Transform Toolpaths, TransformToolpaths-Trim Toolpaths, TrimToolpaths-Wireframe Toolpaths, Wireframe

Toolpaths

29

Mastercam Version 9 Mastercam XTplane Status Bar, Planes Tplane -Entity Status Bar, Planes, Planes by geometryTplane -Equals Gview Status Bar, Planes, Planes – GviewTplane -Equals Cplane Status Bar, PlanesTplane -Front Status Bar, Planes, Front (WCS)Tplane -Last Status Bar, Planes, Last planesTplane -Named Status Bar, Planes, Named ViewsTplane - Status Bar, Planes, Planes by normalTplane-Number RemovedTplane-Off RemovedTplane -Rotate Status Bar, Planes, Rotate planesTplane-Side Status Bar, PlanesTplane-Top Status Bar, Planes, Top (WCS)

Tplane

30

Mastercam Version 9 Mastercam X

Translucent Shading (Toggle)Screen, Shade Settings

Undo Edit, Undo

Version (Alt + V) Help, About XWCS / View Manager Status Bar, WCS, View ManagerXform-Mirror Xform, MirrorXform-Offset Contour Xform, Offset ContourXform-Offset Xform, OffsetXform-Roll Xform, RollXform-Rotate Xform, RotateXform-Scale Xform, ScaleXform-Squash Xform, ProjectXform-Stretch Xform, Drag

Xform, StretchXform-Translate Xform, Translate

Translucent, Undo, Version, View Manager, Xform