material handler - mlcranes.com · material handler operating weight: 176,439 lbs (80,032 kg) sae...

6
MATERIAL HANDLER Operating Weight: 176,439 lbs (80,032 kg) SAE Net Horsepower: with fan pump 495 HP (369 kW) without fan pump 532 HP (397 kW) Swing Torque: 196,600 lbf-ft. (266.5 kN•m) Engine Isuzu AH-6WG1XYSS-02 Tier 3 turbocharged diesel engine with electronic fuel control, 6-cylinder, water-cooled, EGR with cooler, air-to-air intercooler, fuel cooler, auto idle-start, neutral safety start, glow plugs, auto warm-up, EPF engine protection, dual stage fuel filtration, remote oil filter, green plug oil drain. SAE net horsepower .................. 532 HP (397 kW) @ 1,800 rpm Displacement .................................................................... 15.7 L Maximum torque............... 1,660 lbf-ft (2,250 N-m) @ 1,500 rpm Starter........................................................................ 24V-7.0kW Alternator ......................................................................... 50 amp Battery ................................................................. 140 amp hours Cab and Controls Pressurized cab with climate control a/c and heat with defroster, LCD monitor, illuminated soft-touch switches, low-effort controls pre-wired for auxiliary hydraulics, control pattern changer, sliding LEXAN ® MARGARD ® windows, safety glass front window with automatic locking system and vandal cover, intermittent windshield wiper with washer, emergency rear window exit, polycarbonate roof hatch with sunshade, shockless cab suspension with four fluid mountings, KAB ® reclining air-suspension seat, sliding 4-position tilting control consoles, AM/FM radio, digital clock, dome light, seat belt, coat hook, cup holder, storage compartments, floor mat, footrests, ashtray, 24-volt cigarette lighter, 12-volt outlet, travel alarm, handrail, mirrors. Four selectable working modes, anti-theft password protection system, on-board self-diagnostic system with memory, auto- idling system, one-touch decelerator, auto power boost, gate lock safety shutoff. A/C output............................................................. 18,100 BTU/hr Heater output........................................................ 20,150 BTU/hr Sound level (inside cab) ............................................. 69.3 dB(A) Sound level (exterior) ............................................... 105.8 dB(A) Hydraulic System Open-center system, two variable displacement axial piston pumps and one gear pump for pilot controls, main control valve with one 4-spool valve and one 5-spool valve with auxiliary spool. Hydraulic Pumps Maximum flow .................................. 2 x 132 gpm (2 x 500 l/min) Pilot pump maximum flow .............................. 7.1 gpm (27 l/min) Relief Valve Settings Boom / Arm.................................................... 4,550 psi (314 bar) in Power-Boost Mode .................................... 4,980 psi (343 bar) Swing circuit .................................................. 3,840 psi (265 bar) Travel circuit .................................................. 4,980 psi (343 bar) Hydraulic Cylinders Young 2-piece 55´ number of cylinders - bore x rod x stroke. Boom ............................................................. 2 - 8.0˝ x 5.0˝ x 68˝ (203 mm x 127 mm x 1 727 mm) Arm................................................................ 1 - 9.0˝ x 6.0˝ x 72˝ (229 mm x 152 mm x 1 829 mm) Young 2-piece 68´ number of cylinders – bore x rod x stroke. Boom ............................................................. 2 - 8.0˝ x 5.0˝ x 68˝ (203 mm x 127 mm x 1 727 mm) Arm................................................................ 1 - 8.5˝ x 6.0˝ x 72˝ (216 mm x 152 mm x 2 261 mm) Hydraulic Oil Filtration Return filter ................................................................. 6 micron Pilot filter..................................................................... 8 micron Suction screen....................................................... 105 micron Swing Planetary reduction powered by axial piston motor. Internal ring gear with grease cavity for swing pinion. Swing bearing is single-row shear type ball bearing. Mechanical disc swing brake. Auto power swing. Swing speed .............................................................. 0 – 6.4 rpm Tail swing ............................................................. 14´ 1˝ (4.30 m) Swing torque ................................... 196,600 lbf-ft. (266.5 kN•m) Undercarriage X Pattern carbody with sealed and strutted track chain, sealed rollers and idlers, two-speed independent hydrostatic travel with compact planetary final drive, disc type brakes, adjustable track tension, swivel guard. Carrier rollers................................................................ 3 per side Track rollers ................................................................. 9 per side Track link pitch .................................................. 10.24˝ (260 mm) Shoes ......................................................................... 51 per side Shoe width.......................................................... 29.5˝ (750 mm) Ground pressure .......................................... 15.03 psi (1.04 bar) Lubricant and Coolant Capacity Fuel tank.................................................... 238.0 gal. (900 liters) Hydraulic tank.............................................. 82.0 gal. (310 liters) Hydraulic system....................................... 190.0 gal. (720 liters) Final drive (per side) ................................... 3.65 gal. (13.8 liters) Swing drive ................................................. 3.57 gal. (13.5 liters) Engine oil ....................................................... 13.7 gal. (52 liters) Cooling system............................................... 35 gal. (133 liters) Travel System Two-speed independent hydrostatic travel with compact axial piston motors. Hydraulic motor powered output shaft coupled to a planetary reduction unit and track sprocket. All hydraulic components mounted within the width of side frame. Automatic downshift. Spring applied, hydraulically released disc parking brake built into each motor. Each travel motor equipped with counterbalance valve to prevent overspeeding down an incline. Max. travel speed .......................... 1.8 - 2.6 mph (2.9 - 4.2 km/h) Drawbar pull ............................................... 127,000 lbf (565 kN) Gradeability ................................................................ 70% (35 ) Operating Weight Working weight with 29.5˝ (750 mm) shoes, 55´ (16.76 m) 2-piece attachment, 1/2 tank of fuel, 6´ cab riser and 4,400 lbs. (1,996 kg) of additional counterweight ........................................................... 176,439 lbs (80,032 kg) Working weight with 29.5˝ (750 mm) shoes, 55´ (16.76 m) 2-piece attachment, 1/2 tank of fuel, 6´ cab riser, widened undercarriage and 4,400 lbs. (1,996 kg) of additional counterweight .................................... 189,319 lbs (85,873 kg) Working weight with 29.5˝ (750 mm) shoes, 68´ (20.73 m) 2-piece attachment, 1/2 tank of fuel, 6´ cab riser, widened undercarriage and 4,400 lbs. (1,996 kg) of additional counterweight .................................... 192,733 lbs (87,423 kg)

Upload: others

Post on 26-Aug-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MATERIAL HANDLER - mlcranes.com · MATERIAL HANDLER Operating Weight: 176,439 lbs (80,032 kg) SAE Net Horsepower: with fan pump 495 HP (369 kW) without fan pump 532 HP (397 kW) Swing

MATERIAL HANDLER

Operating Weight: 176,439 lbs (80,032 kg)SAE Net Horsepower: with fan pump 495 HP (369 kW) without fan pump 532 HP (397 kW)Swing Torque: 196,600 lbf-ft. (266.5 kN•m)

Engine Isuzu AH-6WG1XYSS-02 Tier 3 turbocharged diesel engine with electronic fuel control, 6-cylinder, water-cooled, EGR with cooler, air-to-air intercooler, fuel cooler, auto idle-start, neutral safety start, glow plugs, auto warm-up, EPF engine protection, dual stage fuel filtration, remote oil filter, green plug oil drain. SAE net horsepower .................. 532 HP (397 kW) @ 1,800 rpmDisplacement .................................................................... 15.7 LMaximum torque............... 1,660 lbf-ft (2,250 N-m) @ 1,500 rpmStarter ........................................................................ 24V-7.0kWAlternator ......................................................................... 50 ampBattery ................................................................. 140 amp hours

Cab and Controls Pressurized cab with climate control a/c and heat with defroster, LCD monitor, illuminated soft-touch switches, low-effort controls pre-wired for auxiliary hydraulics, control pattern changer, sliding LEXAN® MARGARD® windows, safety glass front window with automatic locking system and vandal cover, intermittent windshield wiper with washer, emergency rear window exit, polycarbonate roof hatch with sunshade, shockless cab suspension with four fluid mountings, KAB® reclining air-suspension seat, sliding 4-position tilting control consoles, AM/FM radio, digital clock, dome light, seat belt, coat hook, cup holder, storage compartments, floor mat, footrests, ashtray, 24-volt cigarette lighter, 12-volt outlet, travel alarm, handrail, mirrors.Four selectable working modes, anti-theft password protection system, on-board self-diagnostic system with memory, auto-idling system, one-touch decelerator, auto power boost, gate lock safety shutoff. A/C output.............................................................18,100 BTU/hrHeater output ........................................................20,150 BTU/hrSound level (inside cab) ............................................. 69.3 dB(A)Sound level (exterior) ............................................... 105.8 dB(A)Hydraulic System Open-center system, two variable displacement axial piston pumps and one gear pump for pilot controls, main control valve with one 4-spool valve and one 5-spool valve with auxiliary spool.Hydraulic PumpsMaximum flow .................................. 2 x 132 gpm (2 x 500 l/min)Pilot pump maximum flow .............................. 7.1 gpm (27 l/min)

Relief Valve SettingsBoom / Arm .................................................... 4,550 psi (314 bar)in Power-Boost Mode .................................... 4,980 psi (343 bar)Swing circuit .................................................. 3,840 psi (265 bar)Travel circuit .................................................. 4,980 psi (343 bar)

Hydraulic Cylinders Young 2-piece 55´ number of cylinders - bore x rod x stroke.Boom ............................................................. 2 - 8.0˝ x 5.0˝ x 68˝ (203 mm x 127 mm x 1 727 mm)Arm ................................................................ 1 - 9.0˝ x 6.0˝ x 72˝ (229 mm x 152 mm x 1 829 mm)

Young 2-piece 68´ number of cylinders – bore x rod x stroke.Boom ............................................................. 2 - 8.0˝ x 5.0˝ x 68˝ (203 mm x 127 mm x 1 727 mm)Arm ................................................................ 1 - 8.5˝ x 6.0˝ x 72˝ (216 mm x 152 mm x 2 261 mm)

Hydraulic Oil FiltrationReturn filter ................................................................. 6 micronPilot filter ..................................................................... 8 micronSuction screen....................................................... 105 micron

Swing Planetary reduction powered by axial piston motor. Internal ring gear with grease cavity for swing pinion. Swing bearing is single-row shear type ball bearing. Mechanical disc swing brake. Auto power swing.Swing speed .............................................................. 0 – 6.4 rpmTail swing ............................................................. 14´ 1˝ (4.30 m)Swing torque ................................... 196,600 lbf-ft. (266.5 kN•m)

Undercarriage X Pattern carbody with sealed and strutted track chain, sealed rollers and idlers, two-speed independent hydrostatic travel with compact planetary final drive, disc type brakes, adjustable track tension, swivel guard.Carrier rollers ................................................................3 per sideTrack rollers ................................................................. 9 per sideTrack link pitch .................................................. 10.24˝ (260 mm)Shoes .........................................................................51 per sideShoe width .......................................................... 29.5˝ (750 mm)Ground pressure .......................................... 15.03 psi (1.04 bar)

Lubricant and Coolant Capacity Fuel tank .................................................... 238.0 gal. (900 liters) Hydraulic tank .............................................. 82.0 gal. (310 liters) Hydraulic system ....................................... 190.0 gal. (720 liters) Final drive (per side) ................................... 3.65 gal. (13.8 liters) Swing drive ................................................. 3.57 gal. (13.5 liters) Engine oil ....................................................... 13.7 gal. (52 liters) Cooling system ............................................... 35 gal. (133 liters)

Travel System Two-speed independent hydrostatic travel with compact axial piston motors. Hydraulic motor powered output shaft coupled to a planetary reduction unit and track sprocket. All hydraulic components mounted within the width of side frame. Automatic downshift. Spring applied, hydraulically released disc parking brake built into each motor. Each travel motor equipped with counterbalance valve to prevent overspeeding down an incline.Max. travel speed .......................... 1.8 - 2.6 mph (2.9 - 4.2 km/h)Drawbar pull ............................................... 127,000 lbf (565 kN)Gradeability ................................................................ 70% (35 )

Operating Weight Working weight with 29.5˝ (750 mm) shoes, 55´ (16.76 m) 2-piece attachment, 1/2 tank of fuel, 6´ cab riser and 4,400 lbs. (1,996 kg) of additional counterweight ........................................................... 176,439 lbs (80,032 kg)

Working weight with 29.5˝ (750 mm) shoes, 55´ (16.76 m) 2-piece attachment, 1/2 tank of fuel, 6´ cab riser, widened undercarriage and 4,400 lbs. (1,996 kg) of additional counterweight .................................... 189,319 lbs (85,873 kg)

Working weight with 29.5˝ (750 mm) shoes, 68´ (20.73 m) 2-piece attachment, 1/2 tank of fuel, 6´ cab riser, widened undercarriage and 4,400 lbs. (1,996 kg) of additional counterweight .................................... 192,733 lbs (87,423 kg)

Page 2: MATERIAL HANDLER - mlcranes.com · MATERIAL HANDLER Operating Weight: 176,439 lbs (80,032 kg) SAE Net Horsepower: with fan pump 495 HP (369 kW) without fan pump 532 HP (397 kW) Swing

800 X2 Material Handler Specifications

Working Ranges

Transportation Specifications

65 Ft.

60

55

50

45

40

35

30

25

20

15

10

5

0

-5

-10

-15

-20

-25 Ft.

0510152025303540455055

70 Ft.

65

60

55

50

45

40

35

30

25

20

15

10

5

0

-5

-10

-15

-20

-25

-30 Ft.

05101520253035404550556065

13´ 11˝(4.25 m)

11´ 5˝(3.47 m)

5´ 3

˝(1

.59

m)

2˝(5

0 m

m)

5´ 8˝(1.74 m)

16´ 8˝(5.07 m)20´ 10˝(6.36 m)

24´ 6˝(7.46 m)

9´ 3˝ (2.83 m) std.11´ 4˝ (3.45 m) extended

12´ 7˝ (3.84 m) std.14´ 8˝ (4.47 m) extended

12´ 9

˝(3

.88

m)

35˝(890 mm)

29.5˝(750 mm)

4´ 11

˝(1

50 m

)

5´ 8˝(1.74 m)

55´ Boom 40´ 0˝ (12.19 m)68´ Boom 53´ 0˝ (16.16 m)

14´ 0˝(4.28 m)

10´ (3.05 m) Riser

8´ (2.44 m) Riser

74˝ (1.88 m) Riser

1

2

3

13´ 4˝ (4.06 m)

13´ 0˝ (3.96 m)

13´ 0˝ (3.96 m)

1

2

3

22´ 0˝ (6.71 m)20´ 0˝ (6.10 m)18´ 2˝ (5.54 m)

1

2

3

800 X2 Material Handler with a Young 55' (16.76 m) 2-piece attachment 800 X2 Material Handler with a Young 68' (20.73 m) 2-piece attachment

Page 3: MATERIAL HANDLER - mlcranes.com · MATERIAL HANDLER Operating Weight: 176,439 lbs (80,032 kg) SAE Net Horsepower: with fan pump 495 HP (369 kW) without fan pump 532 HP (397 kW) Swing

11´ 5˝(3.47 m)20´ 10˝ (6.36 m)

29.5˝ (750 mm)...................................... 28,660 lbs. (13 000 kg)35.4˝ (900 mm)...................................... 29,634 lbs. (13 442 kg)

Shoe Width Weight (per side)16´ 8˝ (5.07 m)

39.8˝(1 012 mm) 2´ 9˝

(838 mm)

4´ 7˝(1.39 m

)

Weight with 30˝ (762 mm) gauge widener,

74˝ (1.88 m) cab riser,No Gen Set................... 70, 325 lbs. (31 899 kg)with Ohio Gen Set......... 71, 675 lbs. (32 512 kg)

Weight............................................ 27, 600 lbs. (12 519 kg)

Main Structure

CounterweightUndercarriage

Boom with arm cylinder

Arm assembly

Boom cylinder

10´ (3.05 m) Riser with 30˝ (762 mm) Gauge Widener

8´ (2.44 m) Riser with 30˝ (762 mm) Gauge Widener

74˝ (1.88 m) Riser with 30˝ (762 mm) Gauge Widener

1

2

3

21´ 10˝(6.65 m)

19´ 10˝(6.05 m)

17´ 10˝(5.44 m)1 2 3

10´ 3˝ (3.13 m)

9´ 11˝ (3.02 m)

9´ 11˝ (3.02 m)

1

2

3

Transportation Specifications

800 X2 Material Handler Specifications

2-piece 55´ (16.76 m) Young attachmentLength Weight

Boom with arm cylinder 31´ 5˝(9.58 m)

18, 226 bs.(8 267 kg)

Arm assembly 26´ 3˝(8.00 m)

7, 376 lbs.(3 346 kg)

Boom cylinder 5´ 8˝(1.73 m)

1,493 lbs.(677 kg)

2-piece 68´ (20.73 m) Young attachmentLength Weight

Boom with arm cylinder 38´ 4˝(11.68 m)

20, 850 bs.(9 458 kg)

Arm assembly 31´ 10˝(9.70 m)

8, 166 lbs.(3 704 kg)

Boom cylinder 5´ 8˝(1.73 m)

1,493 lbs.(677 kg)

Page 4: MATERIAL HANDLER - mlcranes.com · MATERIAL HANDLER Operating Weight: 176,439 lbs (80,032 kg) SAE Net Horsepower: with fan pump 495 HP (369 kW) without fan pump 532 HP (397 kW) Swing

800 X2 Material Handler Specifications

Lifting Capacities

Two-piece 55’ (16.76 m) Young Attachment with 4,400 lbs. (1 996 kg) Additional Counterweight

Two-piece 55’ (16.76 m) Young Attachment with 30˝ widened undercarriage and 4,400 lbs. (1 996 kg) Additional Counterweight

Radius of Load20′-0″ (6.10m) 25′-0″ (7.62m) 30′-0″ (9.14mm) 35′-0″ (10.67m) 40′-0″ (12.19m) 45′-0″ (13.72m) 50′-0″ (15.24m) 55′-0″ (16.76m)End Side End Side End Side End Side End Side End Side End Side End Side

+55′-0″ lbs 21,800* 21,800*(16.76m) kg 9 888* 9 888*+50′-0″ lbs 27,100* 27,100* 21,900* 21,900*

(15.24m) kg 12 293* 12 293* 9 934* 9 934*+45′-0″ lbs 26,000* 26,000* 20,500* 20,500*

(13.72m) kg 11 794* 11 794* 9 299* 9 299*+40′-0″ lbs 28,100* 28,100* 24,700* 24,700* 17,400* 17,400*

(12.19m) kg 12 746* 12 746* 11 204* 11 204* 7 893* 7 893*+35′-0″ lbs 29,900* 29,900* 27,400* 27,400* 22,500* 22,500

(10.66m) kg 13 563* 13 563* 12 429* 12 429* 10 206* 10 206+30′-0″ lbs 31,800* 31,800* 29,400* 28,000 25,700* 22,900 17,700* 17,700*(9.14m) kg 14 424* 14 424* 13 336* 12 701 11 658* 10 387 8 029* 8 029*+25′-0″ lbs 34,300* 34,300* 33,000* 33,000* 29,900* 27,600 27,200* 22,700 21,600* 18,800(7.62m) kg 15 558* 15 558* 14 969* 14 969* 13 563* 12 519 12 338* 10 297 9 798* 8 528+20′-0″ lbs 36,300* 36,300* 38,500* 38,500* 34,100* 33,300 30,500* 27,000 27,400* 22,300 24,500* 18,600(6.10m) kg 16 466* 16 466* 17 464* 17 464* 15 468* 15 105 13 835* 12 247 12 429* 10 115 11 113* 8 437+15′-0″ lbs 43,300* 43,300* 47,600* 47,600* 40,400* 40,400* 35,200* 32,200 31,100* 26,200 27,600* 21,800 24,500* 18,300 14,200* 14,200*(4.57m) kg 19 641* 19 641* 21 591* 21 591* 18 325* 18 325* 15 967* 14 606 14 107* 11 884 12 519* 9 888 11 113* 8 301 6 441* 6 441*+10′-0″ lbs 63,600* 63,600* 50,600* 50,600* 42,100* 38,900 36,100* 31,000 31,500* 25,400 27,600* 21,300 24,100* 18,000 15,700* 15,400(3.05m) kg 28 849* 28 849* 22 952* 22 952* 19 097* 17 645 16 375* 14 062 14 288* 11 521 12 519* 9 662 10 932* 8 165 7 122* 6 985+5′-0″ lbs 66,800* 66,300 52,500* 48,100 43,100* 37,200 36,500* 29,900 31,500* 24,700 27,300* 20,800 23,400* 17,700 15,600* 15,300

(1.52m) kg 30 300* 30 074 23 814* 21 818 19 550* 16 874 16 556* 13 563 14 288* 11 204 12 383* 9 435 10 614* 8 029 7 076* 6 940Ground lbs 38,900* 38,900* 52,600* 46,000 43,100* 35,800 36,200* 28,900 30,900* 24,000 26,500* 20,300 22,200* 17,400

Line kg 17 645* 17 645* 23 859* 20 866 19 550* 16 239 16 420* 13 109 14 016* 10 886 12 020* 9 208 10 070* 7 893-5′-0″ lbs 32,200* 32,200* 50,700* 44,500 41,700* 34,700 34,900* 28,200 29,500* 23,500 24,800* 20,000 20,000* 17,300

(1.52m) kg 14 606* 14 606* 22 998* 20 185 18 915* 15 740 15 831* 12 792 13 381* 10 660 11 249* 9 072 9 072* 7 847-10′-0″ lbs 32,700* 32,700* 46,700* 43,700 38,700* 34,100 32,400* 27,700 27,100* 23,200 22,100* 19,800 16,300* 16,300*(3.05m) kg 14 833* 14 833* 21 183* 19 822 17 554* 15 468 14 697* 12 565 12 293* 10 524 10 025* 8 981 7 394 7 394-15′-0″ lbs 35,900* 35,900* 40,600* 40,600* 34,000* 33,800 28,300* 27,500 23,200* 23,100 17,800* 17,800*(4.57m) kg 16 284* 16 284* 18 416* 18 416* 15 422* 15 332 12 837* 12 474 10 524* 10 478 8 074* 8 074*

Radius of Load20′-0″ (6.10m) 25′-0″ (7.62m) 30′-0″ (9.14mm) 35′-0″ (10.67m) 40′-0″ (12.19m) 45′-0″ (13.72m) 50′-0″ (15.24m) 55′-0″ (16.76m)End Side End Side End Side End Side End Side End Side End Side End Side

+55′-0″ lbs 22,500* 22,500*(16.76m) kg 10 206* 10 206*+50′-0″ lbs 27,300* 27,300* 22,300* 22,300*

(15.24m) kg 12 383* 12 383* 10 115* 10 115*+45′-0″ lbs 26,200* 26,200* 20,900* 20,900*

(13.72m) kg 11 884* 11 884* 9 480* 9 480*+40′-0″ lbs 28,300* 28,300* 24,900* 24,900* 17,900* 17,900*

(12.19m) kg 12 837* 12 837* 11 294* 11 294* 8 119* 8 119*+35′-0″ lbs 30,000* 30,000* 27,600* 27,600* 22,700* 22,700*

(10.66m) kg 13 608* 13 608* 12 519* 12 519* 10 297* 10 297*+30′-0″ lbs 32,000* 32,000* 31,900* 31,900* 29,500* 29,500* 25,900* 25,900* 18,000* 18,000*(9.14m) kg 14 515* 14 515* 14 470* 14 470* 13 381* 13 381* 11 748* 11 748* 8 165* 8 165*+25′-0″ lbs 34,500* 34,500* 33,100* 33,100* 29,900* 29,900* 27,200* 27,200* 21,800* 21,800*(7.62m) kg 15 649* 15 649* 15 014* 15 014* 13 562* 13 562* 12 338* 12 338* 9 888* 9 888*+20′-0″ lbs 36,700* 36,700* 38,600* 38,600* 34,100* 34,100* 30,500* 30,500* 27,500* 27,500* 24,600* 24,600*(6.10m) kg 16 647* 16 647* 17 509* 17 509* 15 468* 15 468* 13 835* 13 835* 12 474* 12 474* 11 158* 11 158*+15′-0″ lbs 45,100* 45,100* 47,800* 47,800* 40,600* 40,600* 35,200* 35,200* 31,100* 31,100* 27,600* 27,600* 24,500* 24,400 14,300* 14,300*(4.57m) kg 20 457* 20 457* 21 682* 21 682* 18 416* 18 416* 15 966* 15 966* 14 107* 14 107* 12 519* 12 519* 11 113* 11 067 6 486* 6 486*+10′-0″ lbs 63,900* 63,900* 50,800* 50,800* 42,200* 42,200* 36,100* 36,100* 31,500* 31,500* 27,600* 27,600* 24,100* 24,100* 15,800* 15,800*(3.05m) kg 28 985* 28 985* 23 042* 23 042* 19 142* 19 142* 16 375* 16 375* 14 288* 14 288* 12 519* 12 519* 10 932* 10 932* 7 167* 7 167*+5′-0″ lbs 66,900* 66,900* 52,500* 52,500* 43,200* 43,200* 36,500* 36,500* 31,500* 31,500* 27,300* 27,300* 23,400* 23,400* 15,500* 15,500*

(1.52m) kg 30 345* 30 345* 23 814* 23 814* 19 595* 19 595* 16 556* 16 556* 14 288* 14 288* 12 383* 12 383* 10 614* 10 614* 7 031* 7 031*Ground lbs 38,000* 38,000* 52,500* 52,500* 43,000* 43,000* 36,200* 36,200* 30,900* 30,900* 26,400* 26,400* 22,000* 22,000*

Line kg 17 237* 17 237* 23 814* 23 814* 19 504* 19 504* 16 420* 16 420* 14 016* 14 016* 11 975* 11 975* 9 979* 9 979*-5′-0″ lbs 32,100* 32,100* 50,500* 50,500* 41,600* 41,600* 34,800* 34,800* 29,400* 29,400* 24,700* 24,700* 19,800* 19,800*

(1.52m) kg 14 560* 14 560* 22 906* 22 906* 18 869* 18 869* 15 785* 15 785* 13 336* 13 336* 11 204* 11 204* 8 981* 8 981*-10′-0″ lbs 32,800* 32,800* 46,400* 46,400* 38,500* 38,500* 32,200* 32,200* 26,900* 26,900* 21,900* 21,900* 16,000* 16,000*(3.05m) kg 14 878* 14 878* 21 047* 21 047* 17 463* 17 463* 14 606* 14 606* 12 202* 12 202* 9 934* 9 934* 7 257* 7 257*-15′-0″ lbs 36,100* 36,100* 40,000* 40,000* 33,600* 33,600* 28,000* 28,000* 22,800* 22,800* 17,400* 17,400*(4.57m) kg 16 375* 16 375* 18 144* 18 144* 15 241* 15 241* 12 701* 12 701* 10 342* 10 342* 7 893* 7 893*

Page 5: MATERIAL HANDLER - mlcranes.com · MATERIAL HANDLER Operating Weight: 176,439 lbs (80,032 kg) SAE Net Horsepower: with fan pump 495 HP (369 kW) without fan pump 532 HP (397 kW) Swing

800 X2 Material Handler SpecificationsLifting Capacities

Two-piece 68’ (20.73 m) Young Attachment with 30˝ widened undercarriage and 4,400 lbs. (1 996 kg) Additional CounterweightRadius of Load

20′-0″ 25′-0″ 30′-0″ 35′-0″ 40′-0″ 45′-0″ 50′-0″ 55′-0″ 60′-0″ 65′-0″(6.10 m) (7.62 m) (9.14 m) (10.67 m) (12.19 m) (13.72 m) (15.24 m) (16.76 m) (18.29 m) (19.81 m)

End Side End Side End Side End Side End Side End Side End Side End Side End Side End Side+65′-0″ lbs 21,800* 21,800

(19.81 m) kg 9 888* 9 888*+60′-0″ lbs 21,400* 21,400* 15,000* 15,000*

(18.29 m) kg 9 707* 9 707* 6 804* 6 804*+55′-0″ lbs 23,800* 23,800* 20,600* 20,600* 14,000* 14,000*

(16.76 m) kg 10 796* 10 796* 9 344* 9 344* 6 350* 6 350*+50′-0″ lbs 25,100* 25,100* 23,000* 23,000* 19,300* 19,300*

(15.24 m) kg 11 385* 11 385* 10 433* 10 433* 8 754* 8 754*+45′-0″ lbs 25,900* 25,900* 23,900* 23,900* 22,000* 22,000* 17,200* 17,200*

(13.72 m) kg 11 748* 11 748* 10 841* 10 841* 9 979* 9 979* 7 802* 7 802*+40′-0″ lbs 26,000* 26,000* 23,900* 23,900* 22,000* 22,000* 20,300* 20,300* 13,200* 13,200*

(12.19 m) kg 11 793* 11 793* 10 841* 10 841* 9 979* 9 979* 9 208* 9 208* 5 987* 5 987*+35′-0″ lbs 26,400* 26,400* 24,100* 24,100* 22,100* 22,100* 20,200* 20,200* 17,200* 17,200*

(10.66 m) kg 11 975* 11 975* 10 932* 10 932* 10 024* 10 024* 9 163* 9 163* 7 802* 7 802*+30′-0″ lbs 29,700* 29,700* 26,800* 26,800* 24,300* 24,300* 22,200* 22,200* 20,300* 20,300* 18,400* 18,400*(9.14 m) kg 13 472* 13 472* 12 156* 12 156* 11 022* 11 022* 10 070* 10 070* 9 208* 9 208* 8 346* 8 346*+25′-0″ lbs 30,700* 30,700* 27,400* 27,400* 24,700* 24,700* 22,400* 22,400* 20,300* 20,300* 18,400* 18,400* 14,100* 14,100*(7.62 m) kg 13 925* 13 925* 12 428* 12 428* 11 204* 11 204* 10 160* 10 160* 9 208* 9 208* 8 346* 8 346* 6 396* 6 396*+20′-0″ lbs 31,200* 31,200* 35,600* 35,600* 31,800* 31,800* 28,100* 28,100* 25,100* 25,100* 22,600* 22,600* 20,300* 20,300* 18,300* 18,300* 16,000* 15,700(6.10 m) kg 14 152* 14 152* 16 148* 16 148* 14 424* 14 424* 12 746* 12 746* 11 385* 11 385* 10 251* 10 251* 9 208* 9 208* 8 301* 8 301* 7 257* 7 121+15′-0″ lbs 42,500* 42,500* 45,700* 45,700* 38,200* 38,200* 32,800* 32,800* 28,600* 28,600* 25,400* 25,400* 22,700* 22,700* 20,300* 20,300* 18,100* 17,900* 15,700* 15,600(4.57 m) kg 19 278* 19 278* 20 729* 20 729* 17 327* 17 327* 14 878* 14 878* 12 973* 12 973* 11 521* 11 521* 10 297* 10 297* 9 208* 9 208* 8 210* 8 119* 7 121* 7 076+10′-0″ lbs 60,900* 60,900* 47,900* 47,900* 39,400* 39,400* 33,500* 33,500* 29,000* 29,000* 25,500* 25,500* 22,600* 22,600* 20,100* 20,100* 17,700* 17,600* 15,200* 15,200*(3.05 m) kg 27 624* 27 624* 21 727* 21 727* 17 872* 17 872* 15 195* 15 195* 13 154* 13 154* 11 567* 11 567* 10 251* 10 251* 9 117* 9 117* 8 029* 7 983* 6 895* 6 895*+5′-0″ lbs 21,500* 21,500* 48,900* 48,900* 40,100* 40,100* 33,800* 33,800* 29,100* 29,100* 25,400* 25,400* 22,400* 22,400* 19,700* 19,700* 17,200* 17,200* 14,400* 14,400*

(1.52 m) kg 9 752* 9 752* 22 181* 22 181* 18 189* 18 189* 15 331* 15 331* 13 200* 13 200* 11 521* 11 521* 10 160* 10 160* 8 936* 8 936* 7 802* 7 802* 6 532* 6 532*Ground lbs 14,200* 14,200* 42,200* 42,200* 39,800* 39,800* 33,500* 33,500* 28,800* 28,800* 25,000* 25,000* 21,900* 21,900* 19,100* 19,100* 16,400* 16,400* 13,200* 13,200*

Line kg 6 441* 6 441* 19 142* 19 142* 18 053* 18 053* 15 195* 15 195* 13 063* 13 063* 11 340* 11 340* 9 934* 9 934* 8 664* 8 664* 7 439* 7 439* 5 987* 5 987*-5′-0″ lbs 13,700* 13,700* 30,600* 30,600* 38,600* 38,600* 32,600* 32,600* 27,900* 27,900* 24,200* 24,200* 21,000* 21,000* 18,100* 18,100* 15,200* 15,200* 11,500* 11,500*

(1.52 m) kg 6 214* 6 214* 13 880* 13 880* 17 509* 17 509* 14 787* 14 787* 12 655* 12 655* 10 977* 10 977* 9 525* 9 525* 8 210* 8 210* 6 895* 6 895* 5 216* 5 216*-10′-0″ lbs 15,200* 15,200* 28,100* 28,100* 36,300* 36,300* 30,800* 30,800* 26,400* 26,400* 22,800* 22,800* 19,600* 19,600* 16,600* 16,600* 13,400* 13,400*

(3.05 m) kg 6 895* 6 895* 12 746* 12 746* 16 465* 16 465* 13 971* 13 971* 11 975* 11 975* 10 342* 10 342* 8 890* 8 890* 7 530* 7 530* 6 078* 6 078*-15′-0″ lbs 17,400* 17,400* 28,600* 28,600* 32,900* 32,900* 28,200* 28,200* 24,200* 24,200* 20,700* 20,700* 17,600* 17,600* 14,500* 14,500* 10,800* 10,800*

(4.57 m) kg 7 893* 7 893* 12 973* 12 973* 14 923* 14 923* 12 791* 12 791* 10 977* 10 977* 9 389* 9 389* 7 983* 7 983* 6 577* 6 577* 4 899* 4 899*-20′-0″ lbs 20,100* 20,100* 30,600* 30,600* 28,400* 28,400* 24,600* 24,600* 21,100* 21,100* 17,900* 17,900* 14,800* 14,800* 11,400* 11,400*

(6.10 m) kg 9 117* 9 117* 13 880* 13 880* 12 882* 12 882* 11 158* 11 158* 9 571* 9 571* 8 119* 8 119* 6 713* 6 713* 5 171* 5 171*-25′-0″ lbs 19,900* 19,900* 17,000* 17,000*

(7.62 m) kg 9 026* 9 026* 7 711* 7 711*

1. Lifting capacities shown should not be exceeded. Weight of all lifting accessories must be deducted from the above lifting capacities.

2. Lifting capacities are based on machine standing on firm, uniform supporting surface. User must make allowances for job conditions such as soft or uneven ground.

3. Lifting capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. Capacities marked with an asterisk (*) are limited by hydraulic capacities.

4. Least stable position is over the side.5. Operator should be fully acquainted with the

Operator′s Manual & Operating Safety Booklet, furnished by LBX before operating the machine.

6. Capacities apply only to the machine as originally manufactured and normally equipped by LBX Company LLC.

7. Lift capacity ratings are based on SAE J1097, ″Earthmoving Machinery - Hydraulic Excavators - Lift Capacity″.

Notes: Material Handler lifting capacities

Page 6: MATERIAL HANDLER - mlcranes.com · MATERIAL HANDLER Operating Weight: 176,439 lbs (80,032 kg) SAE Net Horsepower: with fan pump 495 HP (369 kW) without fan pump 532 HP (397 kW) Swing

800 X2 Material Handler Specifications

LBX Company is the proud maker of quality Link-Belt excavators and is located in Lexington, KY. www.lbxco.comLitho in USA 8/12 #LBX2209® LBX and ® Link-Belt are registered trademarks. Copyright 2012. All rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications.

Standard Equipment• KAB 855 sliding/reclining air-suspension seat

with adjustable 4-inch armrests, lumbar support and retractable seat belt

• Safety glass front window with auto lock, windshield wiper and washer with intermittent speeds, Lexan® side and rear tinted windows

• 4-position tilting consoles with memory position and hydraulic lock-out

• Auto climate control a/c and heat• AM/FM stereo with mute button, horn, interior

light, digital clock, hour meter, floor mat, cup holder, sun shade, storage, LH and RH rear view mirrors

• Travel alarm with cancel switch• Vandal guarding with bolt-on FOG capability• EPA Tier III Isuzu diesel engine• Common rail fuel injection• Turbocharger with intercooler• Neutral safety start• Idle start• Glow plug pre-heat• Auto engine warm-up• Reversible cooling fan• Auto idling system• One-touch idle• Dual remote fuel filters with water separation• Double element air filter with in-cab restriction

indicator• Reversible fan• External fuel gauge• Remote, full-flow engine oil filter• Green plug engine oil drain• EPF Engine Protection• Emergency engine stop• Open-center hydraulic system• Four selectable work modes including

attachment mode• Auto power boost

• Auto swing priority• Pre-set auxiliary pump settings - 10• Auxiliary valve• Stackable main control valve• Auxiliary pipe brackets• Control levers pre-wired for auxiliary• Control pattern changer• Long undercarriage• Sealed and lubricated track chain• Two-speed with auto shift and straight travel• Planetary drive• Spring-applied, hydraulic release brake• Hydraulic track adjust• Swivel guard belly pan• Track guides• Vandal locks with common key• 27,600 lb (12,500 kg) counterweight with lifting

eyes• Hand rail• Tool box• Catwa ks• Attachment cushion valve• Arm and boom speed assistance• Arm and boom regeneration• Arm and boom holding valves• Cylinder cushion• Centralized lube bank• Illuminated LCD service monitor• On-board diagnostic system• Anti-theft device• 12-volt accessory outlet• 70-watt work lights on boom and upper

• Tracks29.5-in (750 mm) 2-bar grouser35.4-in (900 mm) 2-bar grouser

• 74˝ (1.88 m), 8´ (2.44 m), or 10´ (3.05 m) risers are available, manual tilt cab, includes ladder and platform

• 2-piece 55´ (16.76 m) Young attachment• 2-piece 68´ (20.73 m) Young attachment• Load holding valves for boom & arm cylinders• Grapple rotation circuit• 30-in (762 mm) gauge widened undercarriage• 4,400 lbs. (1 996 kg) of additional

counterweight• 33 kw Baldor generator and Hubbell

controller includes volt meter and amp meter• Free swing• FOPS level 2 cab guard• Front guard - mesh or bars

Options