matworks is a division of national floorcoverings ltd, the uk’s … · 2019-10-02 · logo...
TRANSCRIPT
MatWorks is a Division of National Floorcoverings Ltd, the UK’s leading manufacturer of commercial floor coverings.
entrance solutions
2
contents
Aluminium primary entrance solutions
pg06 How to specify entrance productspg12 Frameworks 12pg14 Frameworks 15Cpg16 Frameworks 17C & 22Cpg18 Frameworks 17OP & 22OPpg20 Frameworks 17CSpg22 Frameworks 17HD
Primary modular solutions
pg26 Treadloc 25pg28 Entrack50pg30 Tyre Tile
Secondary entrance solutions
pg36 Workspace Entrancepg38 Workspace Entrance Designpg40 Premierpg42 Vista Dualpg44 Ext Matpg46 DDA Coir pg48 Black Coir
Logo matting
pg52 MW Print Matpg54 Coir Logopg56 Brush Logopg58 Fusion
Technical pg60 Cleaning & Maintenancepg66 Accessories
Introductions
3
Entrack50 with MW Rib Inserts - Swansea University Bay Campus
4
5
How to specify entrance products
Medium Footfall - area often requiring designed carpet tiles or secondary products
Medium Footfall - area often requiring designed carpet tiles or secondary products
Medium to Heavy Footfall - completes the drying process Virtually
all dirt and moisture is removed from shoes after
4.5 metres.
LOOSE LAY OR LOGO MATS - to control dust and moisture
SECONDARY
LOOSE LAY MATSOR LOGO MATS-
LOOSE LAY MATSOR LOGO MATS-
High Footfall - over their lifecycle requiring primary or secondary products
BOARDROOM
CORR
IDOR
OFFICE
RECEPTION
STAIRWAY
LIFT
LIFT
WC
REVOLVINGDOOR
ZONE1a
ZONE1b
ZONE2
ZONE2
ZONE2
ZONE3
ZONE3
ZONE3
ZONE3
4.5Meters
6
Heavy Footfall - scrapes fine debris and absorbs moisture in the indoor foyer area for up to 70% in the first 3 metres PRIMARY ENTRANCE MATTING
Heavy Footfall - Up to 40% of dirt/moisture is removed from shoes in the first 1.5 metres EXTERIOR BARRIER MATTING ALUMINIUM PRODUCT
ZONE 1 In Zones 1a and 1b the installation of exterior matting catches the first wave of heavy debris in a high traffic area, ensuring the removal of up to 40% of dirt and moisture from entering the building. An effective primary entrance mat will continue the removal of dirt and moisture working with the external matting containing any heavy debris.
ZONE 2 In these zones a high specification secondary barrier mat will continue the cleaning and scraping process, removing up to 70% of remaining dirt and moisture. At this stage dust is also driven into the matting rather than remaining airbourne.
ZONE 3 In buildings with a very high volume of traffic, primary matting is often supplemented into secondary areas, loose lay matting and logo mats are used to reduce dust migration throughout main corridors and completely remove remaining dirt and moisture from shoes completing the drying process and protecting your building investment.
Medium Footfall - area often requiring designed carpet tiles or secondary products
Medium Footfall - area often requiring designed carpet tiles or secondary products
Medium to Heavy Footfall - completes the drying process Virtually
all dirt and moisture is removed from shoes after
4.5 metres.
LOOSE LAY OR LOGO MATS - to control dust and moisture
SECONDARY
LOOSE LAY MATSOR LOGO MATS-
LOOSE LAY MATSOR LOGO MATS-
High Footfall - over their lifecycle requiring primary or secondary products
BOARDROOM
CORR
IDOR
OFFICE
RECEPTION
STAIRWAY
LIFT
LIFT
WC
REVOLVINGDOOR
ZONE1a
ZONE1b
ZONE2
ZONE2
ZONE2
ZONE3
ZONE3
ZONE3
ZONE3
4.5Meters
7
Frameworks 17OP
Frameworks 17HD
Frameworks 17C
Frameworks 17CS
Frameworks 12
Frameworks 15C
Frameworks 22OP
Frameworks 22C
8
FRAMEWORKS
aluminium primary
entrance solutions
9
Frameworks 12 - pg 12 Frameworks 17OP - pg 18
How to choose your frameworks system:
FRAMEWORKS
Stage 1: Select your height
Stage 2: Pick your construction
Stage 3: Pick your insert from 13 options Rib Workspace
Entrance
12mm
Open Closed
Frameworks 15C - pg 14
15mm
Frameworks is a unique range of tough and durable aluminium extruded entrance systems with a range of insert options.
Ext Mat Premier
17mm
Frameworks 17C - pg 16
Frameworks 17CS - pg 20
Frameworks 22OP - pg 18
Frameworks 17HD - pg 22
Frameworks 22C - pg 16
C = Closed CS = Closed Scraper DR = Drainable HD = Heavy Duty OP = Open
Open - collect dirt and moisture inside the mat/matwell rather than on the surface. Rollable for cleaning. Closed - Dirt and moisture collected on the surface of the mat.
22mm
10
Available Colourways:
Workspace Entrance Vulcan
Premier Dark Blue
Workspace Entrance Victor
Premier Charcoal
Accessories:
T-Bar
Workspace Entrance Viscount
Premier Mercury
10mm-25mm Framing
Workspace Entrance Vixen
EXT Mat
MW Ramp System
MW Rib Light Grey MW Rib Anthracite MW Rib Brown MW Rib Natural MW Rib Red
11
FRAMEWORKS 12
Images for illustrative purposes only - for a true likeness order a sample
12
50mm 3mm
12mm
Description:Low profile rollable aluminium grid matting system suitable for heavy traffic areas.
Ideal for recess matwells or areas where surface mounting is required.
The extruded aluminium profiles are assembled using PVC hinges which incorporates an integral damper strip. PVC hinges enable easier on site shaping.
Custom made to required sizes.
Ramping available for surface mounting.
Insert options available to allow for external use.
Colour options amend:13 colour options available: see page 11.
Accessories:Frameworks accessories – see page 66 for further details. For simple rectangular mats, Frameworks can be made to exact requirements. For more complicated shapes, MatWorks recommends one of our approved installers.
13
Images for illustrative purposes only - for a true likeness order a sample
FRAMEWORKS 15C
14
70mm
Description:Heavy gauge 15C entrance matting system.
Frameworks 15C incorporates an arch form heavy gauge aluminium chassis, capable of withstanding extreme traffic in the most demanding applications.
42mm wide wiper inserts provides optimum contact area for absorbency and soil collection.
Wide variety of wiper strips to suit almost any application with 13 different colourways.
Assembled using PVC hinges which incorporate an integral damper strip. PVC hinges enable easier on site shaping.
Custom made to required sizes.
Colour options amend:13 colour options available: see page 11.
Accessories:Frameworks accessories – see page 66 for further details. For simple rectangular mats, Frameworks can be made to exact requirements. For more complicated shapes, MatWorks recommends one of our approved installers.
15
FRAMEWORKS 17C & 22C
Images for illustrative purposes only - for a true likeness order a sample
16
44mm 44mm
Description:Heavy duty primary entrance mat with exceptional performance.
Frameworks 17C and 22C closed construction ensures that all debris is captured by the mat surface to ensure a convenient cleaning operation.
Suitable for both footfall and trolley traffic.
Wide variety of wiper strips to suit almost any application with 13 different colourways.
The extruded aluminium profiles are assembled using PVC hinges which incorporates an integral damper strip. PVC hinges enable easier on site shaping.
Custom made to required sizes.
Colour options amend:13 colour options available: see page 11.
Accessories:You may also be interested in: Frameworks accessories – see page 66 for further details. For simple rectangular mats, Frameworks can be made to exact requirements. For more complicated shapes, MatWorks recommends one of our approved installers.
17
Images for illustrative purposes only - for a true likeness order a sample
FRAMEWORKS 17OP & 22OP
18
Colour options amend:13 colour options available: see page 11.
Accessories:Frameworks accessories – see page 66 for further details. For simple rectangular mats, Frameworks can be made to exact requirements. For more complicated shapes, MatWorks recommends one of our approved installers.
30mm 3mm30mm 3mm
Description: Frameworks 17OP and 22OP are heavy traffic entrance matting systems. Both systems incorporate a rollable, grid style, open surface construction. The open surface grid system allows dirt to fall into specially designed debris channels whilst allowing the textile inserts to wipe moisture from feet.
Wide variety of wiper strips to suit almost any application with 13 different colourways.
The extruded aluminium profiles are assembled using PVC hinges which incorporates an integral damper strip. PVC hinges enable easier on site shaping.
Custom made to required sizes.
A drainable 17DR is also available.
19
Images for illustrative purposes only - for a true likeness order a sample
FRAMEWORKS 17CS
20
30mm 1021mm
Description:Frameworks 17CS aluminium based entrance at is ideal for heavy traffic areas.
Frameworks 17CS is a closed construction primary entrance mat combining textile wiper inserts with alternate PVC scraper bars allowing for dirt and moisture to be taken off in one movement.
Wide variety of wiper strips to suit almost any application with 13 different colourways.
Custom made to required sizes.
Colour options amend:13 colour options available: see page 11.
Accessories:Frameworks accessories – see page 66 for further details. For simple rectangular mats, Frameworks can be made to exact requirements. For more complicated shapes, MatWorks recommends one of our approved installers.
21
Images for illustrative purposes only - for a true likeness order a sample
FRAMEWORKS 17HD
22
44mm
Description:Frameworks 17HD is ideal for extremely heavy traffic areas in the most demanding of applications. The aluminium base along with PVC undercarriage support strips allowing for excellent point loading.
Wide variety of wiper strips to suit almost any application with 13 different colourways.
The extruded aluminium profiles are assembled using PVC hinges which incorporates an integral damper strip. PVC hinges enable easier on site shaping.
Custom made to required sizes
Colour options amend:13 colour options available: see page 11.
Accessories:Frameworks accessories – see page 66 for further details. For simple rectangular mats, Frameworks can be made to exact requirements. For more complicated shapes, MatWorks recommends one of our approved installers.
23
Entrack 50
Tyre Tile
Treadloc 25
24
TREADLOC25 ENTRACK50
TYRE TILE
primary modular
solutions
25
TREADLOC 25
Images for illustrative purposes only - for a true likeness order a sample tile
26
Heavy Duty bespoke entrance tiles
Workspace Entrance Victor
Workspace Entrance Vulcan
Premier Mercury
Premier Dark Blue
EXT Mat
Workspace Entrance Vixen
Workspace Entrance Viscount
Premier Charcoal
Diamond Yellow
Diamond Charcoal
Description:Treadloc 25 is a revolutionary flooring tile made from heavy duty Nitrile Rubber and designed to withstand heavy footfall traffic. Treadloc 25 is designed not to expand, contract, fade or become brittle, nor will it bend or buckle under pressure making it an ideal heavy contract solution for entrance areas in every sector.
Treadloc 25 tiles are easily interchangeable and designed with interlocking male and female components for ease of installation. Alternate construction of scraping Nitrile and absorbing Nylon is designed to maximise the amount of dirt and moisture removed from feet.
The versatile tiles can be quarter turned during installation to create a checkerboard effect allowing for multi directional entrances. The contrasting LRV values of our yellow and black hazard tiles successfully aid directional flooring for sight sensitive and disabled people. Drainable apertures allow the Treadloc product to be installed externally with our MatWorks EXT insert. This low profile tile can also be surface mounted in problem areas where there is no recess. Treadloc 25 is the choice of entrance flooring tiles whilst also providing a significant cost benefit compared to standard aluminium entrance matting.
Technical Data:Tile Size 250mm x 250mm x 12mm
Locking Guides Easy lnter-locking system as standard. Removable male and female connectors.
Composition Nitrile rubber composition
Dry Rubbing (BS1006:X12) 4 - 5
Wet Shampoo (851006:UK-TB) 4 - 5
Performance Nitrile Rubber is resistant to oil, grease & fuel.
Resistant to stable temperatures 40-180 C (40-225F)
Wear Classification Heavy Contract Class 33
Product Weight Diamond 12,300gsm
Premier 13,500gsm
Workspace Entrance 14,000gsm
Flammability Cfl-s1 EN 13501-1
Twice the weight of leading competitor products - twice the durability
27
Images for illustrative purposes only - for a true likeness order a sample
ENTRACK 50
28
10mm
85mm
Locating lug
Connect Entrack50 together to create any size entrance mat required:
Recyclable and reusable, versatile TPE modular
matting solution
Workspace Entrance Viscount
Premier Dark Blue
Premier Mercury
MW Rib Light Grey
Workspace Entrance Victor
Workspace Entrance Vulcan
Workspace Entrance Vixen
Premier Charcoal
MW Rib Anthracite
EXT Anthracite
Description:A flexible modular system made from TPE which won’t expand, contract or fade in colour. An extremely versatile product, Entrack50 carpet strips are interchangeable to reduce life-cycle costs and the product is suitable for entrances with or without matwells.
High specification low profile platform.
Easy to cut and shape to bespoke patterns.
Recyclable and reusable.
Won’t tap, bounce or buckle under heavy footfall.
Easily cut and trimmed on site.
Made in Britain.
Suitable for external or internal areas.
Technical Data: Size 500mm x 500mm
x10mm
Insert width 85mm
Connection integral ‘lock down’ fixing system
Colourway options 10
Environmental options Recyclable and reusable
Base Non-pvc polymer base
Module 2 Module 4 Module 6 Module 9 Module 12 Module 16
29
Images for illustrative purposes only - for a true likeness order a sample tile
Made from 100% recycled tyres
TYRE TILE
30
Tyre Tile a fully recycled closed loop product MatWorks has developed a value engineered product that is also a fully recycled matting system.
Primary Entrance Matting - Manufactured using 100% recycled rubber
Tyre Tile
Function:Tyre Tile soil resistant mats are specifically recommended for covered areas, preferably recessed into the floor. These mats are designed for heavy duty wear in situations such as shopping centres, hospitals and public buildings.
The Tyre Tile mat is non-slip and extremely stable therefore this type of mat is absolutely safe for wheelchairs, high heels and walking sticks.
Technical Data:Weight 8410 gsm
Thickness 10mm
Composition Rubber Tyre with Nylon Tread
Backing Polyethylene Webbing
Tile Size 304mm x 304mm
Wear Classification Heavy Contract
Flammability DIN 4102, B1
Colour Fastness
To light 6
Wet Rubbing 4-5
Dry Rubbing 5
Wet Shampoo 4-5
Colours Options 1
Tyre Tile incorporates recycled tyres as wiper strips within the products. Everyday 100,000 tyres are taken from cars, vans, trucks, buses and bicycles, what happens to them? Until recently most were either dumped or burnt, both of which are extremely harmful to the environment. Tyres that are illegally dumped in the countryside or in land fills are virtually impossible to break down due to the synthetic and chemical materials inside them, and when burnt these cause dense smoke and toxic fumes, many of which cause
a damaging carbon footprint. We have introduced Tyre Tile as a product which has very little impact on the environment and as it uses 100% recycled or recyclable source material is value engineered to ensure it can fit into any project.
This gives us, the manufacturer, and you the consumer, the opportunity to reduce our carbon footprint by not using raw materials from source.
31
Entrack50 - Loughborough University / Swansea University
32
33
secondary entrance solutions
“The second line of defence for medium to high traffic areas. Entrance carpets and tiles with
colourways to match any colour scheme.”
34
WORKSPACE ENTRANCE WORKSPACE ENTRANCE DESIGN
PREMIER VISTA DUAL
EXT MAT DDA COIR
BLACK COIR
secondary entrance solutions
35
Images for illustrative purposes only - for a true likeness order a sample tile
WORKSPACE ENTRANCE
36
Tough heavy contract, secondary entrance matting
Vulcan
Victor
Viscount
Vixen
Description:Tough heavy contract, secondary entrance matting.
All products conform to BS8300.
Low LRV Values compared to aluminium, LVL and fibrebonded products ensuring a positive point difference is easy to achieve for areas where partially sighted traffic will be important to consider.
Equalities Act 2010 compliant.
Entrance matting resistant to point loading and scuffing from rubber wheels and walking aids.
Flame Properties:Cfl-s1 for tiles.
Colours:Colour Options Available 4.
Technical Data:Style Tufted Cut Pile with integral
scraper system
Fibre Construction 100% solution dyed nylon
Tuft Gauge 1/10”
Pile Yarn Weight 1,000 gsm
Pile Height 5mm +/- 0.5mm
Pile Density 114,260 tufts per square metre
Total Weight Tile 4,800 gsm / Sheet 1,800 gsm
Sheet Thickness Tile 9mm / Sheet 8mm
Backing Bitumen Compound / Eco-Bac /
Unitary Bac
Dimensions 50cm x 50cm tile / 2m x 20m nominal
Wear Classification Heavy Contract Class 33
Colour Fastness To Water - 5
To Light - 5
To Rubbing - 4.5
Flammability Cfl-s1
Warranty 10 Years
37
WORKSPACE ENTRANCE DESIGN
38
3 Designs - 4 Colourways
Tough heavy contract, secondary entrance matting
DESIGN 1 DESIGN 2 DESIGN 3
Victor Victor Victor
Viscount
Vixen
Vulcan
Viscount Viscount
Vixen
Vulcan
Vixen
Vulcan
Description:Tough heavy contract, secondary entrance matting.
All products conform to BS8300.
Low LRV Values compared to aluminium, LVL and fibrebonded products ensuring a positive point difference is easy to achieve for areas where partially sighted traffic will be important to consider.
Equalities Act 2010 compliant.
Entrance matting resistant to point loading and scuffing from rubber wheels and walking aids.
Flame Properties:Cfl-s1 for tiles.
Colours:3 Designs - 4 Colourways.
Technical Data:Style Tufted Cut Pile with integral
scraper system
Fibre Construction 100% solution dyed nylon
Tuft Gauge 1/10”
Pile Yarn Weight 1,000 gsm
Pile Height 5mm +/- 0.5mm
Pile Density 114,260 tufts per square metre
Total Weight Tile 4,800 gsm / Sheet 1,800 gsm
Sheet Thickness Tile 9mm / Sheet 8mm
Backing Bitumen Compound / Eco-Bac /
Unitary Bac
Dimensions 50cm x 50cm tile
Wear Classification Heavy Contract Class 33
Colour Fastness To Water - 5
To Light - 5
To Rubbing - 4.5
Flammability Cfl-s1
Warranty 10 Years
3 Designs - 4 Colourways
39
PREMIER
Images for illustrative purposes only - for a true likeness order a sample tile
40
High specification, secondary entrance
matting
Dark Blue
Charcoal
Mercury
Description:High specification secondary entrance matting.
Made from 80% wool from renewable sources only.
Absorbs up to 4 times more moisture than man made fibres.
All products conform to BS8300.
Low LRV Values compared to aluminium, LVL and fibrebonded products. This ensures a positive point difference is easy to achieve for areas where partially sighted traffic will be important to consider.
Equalities Act 2010 compliant.
Entrance matting resistant to point loading and scuffing from rubber wheels and walking aids.
Flame Properties:Bfl-s1 (Tile only).
(BS EN ISO 11925.2).
(BS EN ISO 9239.1).
Colours: Colour Options Available 3.
Technical Details:Style Tufted Twist Pile
Fibre Construction 80% Wool / 20% Nylon + monofilament scraper
Tuft Gauge 1/8”
Pile Yarn Weight 1500 gsm
Pile Height 6mm
Pile Density 117,800 tufts per m2
Total Weight Tile 5300 gsm / Sheet 2300 gsm
Total Thickness Tile 12mm / Sheet 10mm
Backing Colback Secondary Backing Unitary Bac. Tile Backing Bitumen
Roll Size 25.00m x 2.00m
Tile Size 50cm x 50cm (Tile)
Wear Classification Heavy Contract
Electro-static Less than 2Kv
Colour Fastness (BS1006) Light (BS1006:B02) 5 Wet Rubbing (BS1006:B01) 4 - 5 Dry Rubbing (BS1006:X12) 4 - 5 Wet Shampoo (BS1006:UK-TB) 4 - 5
41
Images for illustrative purposes only - for a true likeness order a sample tile
VISTA DUAL
42
Tough linear design, secondary entrance matting
Blue
Red
Anthracite
Description:Made from 100% solution dyed nylon designed with an alternate linear pattern comprising of scraper and moisture absorbing yarn, ideal for the removal of both dirt and moisture.
Flame Properties:Cfl-s1.
Colours: Colour Options Available 4.
Technical Data:Manufacturing process Tufted ISO 2424
Gauge 5/32” Cutpile
Pile yarn composition 100% PA6 ISO 2424
Primary backing Non Woven
Backing PVC
Width 200 cm
Pile weight 880 g/m²
Total weight 3400 g/m² +/- 10% ISO 8543
Pile height 6.4 mm ISO 1765
Total height 8,5 mm +/- 10% ISO 1765
Number of tufts 134000
Overall use class Commercial 32, Areas with medium use EN 1307
Luxury class LC3 EN 1307
Castor chair suitability Yes, permanent use EN 985
Stair suitability Yes, permanent use EN 1307
Colour fastness to light ≥ 5 ISO 105-B02
Colour fastness to rubbing, wet and dry ≥ 4 ISO 105-X12
Colour fastness to water ≥ 4 ISO 105-E01
Colour fastness to soiling ≥ 3,5 EN 1269
Electrostatic charging < 2kV ISO 6356
Slip resistance > 0,3 Machine direction EN 13893 > 0,3 Cross direction EN 13893Flammability Cfl-s1 EN 13501-1
AbZ Nr. Z-156.601-1165
Silver
43
EXT MAT
44
Backing PrimaryBacking
Scraping Yarn
Scraping Yarn
Description: MW-EXT is a special outdoor mat that pairs scraping qualities with moisture absorption. The outdoor mat is available in three colours and suits every entrance.
MW-EXT is a robust mat that is ideal for heavy commercial use. It works best in entrance areas, stairwells, hospitality areas & lifts, for example, in commercial buildings and medium-sized and large offices.
MW-EXT stands out in terms of moisture absorption. Consequently, the mat is optimised for scraping. Small areas of dirt in the mat are not visible. This product can be used inside or outside and provides a durable solution in high traffic areas thanks to its Bouclé construction. The slightly blended design features coarse yarns only.
MW-EXT is a versatile outdoor mat fitting many different situations. This is down to its practical and versatile appeal. Even if the mat is used indoors it continues to perform to the highest standards by preventing dirt and moisture ingress reaching internal floors within a building.
Recyclable and reusable, versatile TPE modular
matting solution
Brown
Red
Anthracite
Technical Data: Pile material 100% Polyamide Backing PVC Primary backing nonwoven PET/PA YarnConstruction Bouclé Pattern Blended Colours 3 Pile weight ISO 8543 ± 600 g/m² Total weight ISO 8543 ± 3,000 g/m² PileHeight ISO 1766 ± 6.5 mm Total height ISO 1765 ± 8.0 mmPile density ISO 8543 0.079 g/cm³ Number of stitches ISO 1763 ± 64,500 /m² Use classification EN 1307 33 Wearing class EN 1963 33 Comfort EN 1307 LC1 Suitability for stairs EN 1963 Intensive use Suitability for castor chairs EN 985 Occasional use Dimensional stability ISO 2551 <0.4% Light fastness ISO 105 B02 >7 Water fastness ISO 105 B01 4 – 5 Rubbing fastness ISO 105 X12 4 – 5 Salt water ISO 105 E02 4 – 5 Shampoo BS 1006 4 – 5 Organic solvents ISO 105 X05 4 – 5 Absorption capacity TNO W6034 ± 3.8 l/m² Flammability Euroclass EN13501 CFl-s1 Slip resistance EN13893 DS Static charge ISO 6356 <0.1 kV Static charge ISO 6356 Available Roll Widths 200 cm Roll length ± 20 m
45
DDA COIR
Images for illustrative purposes only - for a true likeness order a sample tile
Unique glass scrim layer means DDA Coir is more stable, more densely packed than other products - making it ideal to handle wheeled traffic, crutches and high heels.
46
Colours
Cfl-s1
Coir (Scraping) Yarn
Integratedstability scrim
Backing
Description: Our MatWorks DDA Coir ishard-wearing and satisfies all officialcommercial requirements, which isunique for a coir product. It complieswith the rigorous European Fire Safetyrequirements (Cfl-S1) and has a wearclassification of Class 32 (BS EN 1307)Coir is a natural material which looksgreat, offers excellent durability andalso absorbs a great deal of dirt andmoisture, which means you will saveon cleaning costs.
The yarn is mechanically spun toensure a uniform and regular patternwith minimal fibre loss.
This product can absorb up to eightlitres of water per square metre,producing unrivalled performance inthis product sector.
This product is constructed usingan unique glass scrim which meansthat this product is hardly affectedat all by stretching and is extremelystable. That means it is also ideal forwheelchair users and presents noproblems at all for people on crutchesor wearing high heeled shoes.
Technical Data: Pile material 100% Machine spun
coir yarnBacking PVC with integrated
stability scrimYarn Construction VelourPattern UniColours 1Pile weight ISO 8543 17mm: ± 3.50kg m2
Total weight ISO 8543 17mm: ± 6.85kg m2
Pile height ISO 1766 17mmTotal height ISO 1765 17mmNumber of stitches ISO 1763 ± 41.800/m2
Use classification EN 1963 32Wearing class EN 1963 32Comfort EN 1307 LC5Light fastness ISO 105 B02 > 6Water fastness ISO 105 B01 3-4Rubbing fastness ISO 105 X12 3-4Salt water ISO 105 E02 3-4Shampoo BS 1006 3-4Organic solvents ISO 105 X05 3-4Absorption capacity TNO W6034 17mm: ± 8,4 l/m2
Flammability Euroclass EN 13501 Cfl-s1Slip Resistance EN 13893 DSStatic charge ISO 6356 2,0 kVDeclaration of Performance AvailableSizes rolls 200cmRoll length ± 10m
47
BLACK COIR
Images for illustrative purposes only - for a true likeness order a sample tile
48
Black Coir
Description: Available in 13 to 23mm for ease of use on variable surfaces
Our world renowned coir product is made from machine spun coir yarns, tightly woven to provide a hard wearing value product.
A tough product designed for moderate commercial use, Coir can be cut into any shape or design to create tailored entrance matting solutions.
Flame Properties:F-fl
Colours:1 colour way black only
Technical Data: Pile material 100% Machine spun coir yarnBacking PVC with integrated stability scrimYarn Construction VelourPattern Natural/Colour: Uni, Design: Linear Colours 1Pile weight ISO 8543 17mm: ± 2.65kg m2
Total weight ISO 8543 17mm: ± 5.65kg m2
Pile height ISO 1766 17mmTotal height ISO 1765 17mmNumber of stitches ISO 1763 ± 38.000/m2
Use classification EN 1963 32Wearing class EN 1963 32Comfort EN 1307 LC5Light fastness ISO 105 B02 > 6Water fastness ISO 105 B01 3-4Rubbing fastness ISO 105 X12 3-4Salt water ISO 105 E02 3-4Shampoo BS 1006 3-4Organic solvents ISO 105 X05 3-4Absorption capacity TNO W6034 17mm: ± 7.4 l/m2
Flammability Euroclass EN 13501 FflSlip Resistance EN 13893 DSStatic charge ISO 6356 2.0 kVDeclaration of Performance AvailableSizes rolls 200cmRoll length ± 12.5m - 28mm ± 10m
High specification secondary entrance
matting
Coir (Scraping) Yarn
Integratedstability scrim
Backing
49
“Make a lasting impression with a bespoke branded logo mat”
50
MW PRINT MATS COIR LOGO
BRUSH LOGO FUSION MAT
“Make a lasting impression with a bespoke branded logo mat”
logo matting
51
Description This truly high quality multi-functional Dust Control Mat not only cleans and dries shoe-soles preventing dirt and moisture being tracked into facilities. It also provides an excellent opportunity to address safety issues as most people primarily look to the floor.
Superior colour fastness is ensured, in accordance with DIN54006. We work with 16 standard PMS colours, which allows any other colour to be matched. Printed Mats offers a state-of-the-art technology that even allows 3-dimensional effects, fine lines and colour shading, so each mat has a truly individual customised image.
MW PRINT MAT
52
MW Print Mat Tufted cut loop carpet mat consisting of 100% non-crush polyamide 6.6 high twist yarn, approx 700gr/m2. Nitrile rubber backing, 1.5mm thick. Non slip-gripper backing. Enforced borders, do not curl in cold weather and will not tear. Machine washable at 50oC. Oil and microbe resistant. Excellent moisture absorption capacity: >4ltr/m2. Pile height 7mm. Overall thickness: 8.5mm.
How to Order
Title or name Give any name relevant to the design.
Send logo or image to [email protected] Acceptable formats are JPG, TIF, EPS, PCX, Adobe Illustrator, Certified PDF. In case no logo is available, text is also possible. In such case, give text, preferred letter type and letter colour.
Sizes: Select required mat size. 60cm, 75cm, 85,cm,115cm,150cm and 200cm including border Lengths up to 400cm. Sizes are approximate, subject to a tolerance of about 3%.
Orientation: Landscape or Portrait.
Landscape
Background Colour Recommended are dark colours.
Quantity Indicate number of mats. More mats per design lowers the cost.
Portrait
(Colours shown may deviate slightly from the original colours).
53
COIR LOGO
54
Description: Coir is traditional and effective barrier matting, made with 100% natural fibres. Perfectly suitable for both commercial and domestic entrance areas. Coir matting will capture a large amount of moisture and provides excellent airflow for efficient vacuuming.
Flame Properties: BS 4790 (low radius of char)
Maintenance: Regular vacuuming with suction attachment. Occasionally reverse the matting.
Installation: Sub floors should be clean, dry and flat and prepared in accordance with BS5325. Entrance area sheet should be fully adhered.
High specification, secondary entrance matting
Coir Natural
Coir Black
Coir Red
Coir Green
Coir Light Grey
Coir Tan
Coir Brown
Technical Data: Manufacturing process Pile implant
Surface aspect Cut pile
Pile material 100% coir - high twist yarns made from coconut husk fibre
Backing PVC
Overall Thickness Natural: 17mm, 14mm and 28mm
Colours: 17mm
Roll Widths 1m and 2m
Roll Lengths 12m - full cut length service available Pile Weight 2700 grams/m2 (17mm quality)
Total Weight 5700 grams/m2 (17mm quality)
55
Images for illustrative purposes only - for a true likeness order a sample tile
BRUSH LOGO
56
Description: Coir is traditional and effective barrier matting, made with 100% natural fibres. Perfectly suitable for both commercial and domestic entrance areas. Coir matting will capture a large amount of moisture and provides excellent airflow for efficient vacuuming.
Flame Properties: EFL-S1
Colours: Colour Options Available 7
Maintenance: Regular vacuuming with suction attachment
Installation: Sub floors should be clean, dry and flat and prepared in accordance with BS5325. Entrance area sheet should be fully adhered.
Tolerances: The above information is given in good faith and all sizes and weights are subject to manufacturing tolerances.
High specification, secondary entrance matting
Brush Rib Anthracite
Brush Rib Black
Brush Rib Blue
Brush Rib Brown
Brush Rib Green
Brush Rib Natural
Brush Rib Red
Technical Data: Manufacturing process Non-woven needled Surface aspect Looped fibres ribbed Pile material 100% synthetic stain resistant fibre Backing Water resistant SBR latex Overall Thickness 13mm Roll Widths 2m Roll Lengths 25m - full cut length
service available Pile Weight 1700 grams/m2
Total Weight 2700 grams/m2
57
FUSION MAT
Images for illustrative purposes only - for a true likeness order a sample tile
58
Description: Fusion Graphics Entrance Logo Mat is a revolutionary new way of branding flooring products with your logo. The subtle Fusion affect is available on any carpet tile within the Paragon Carpets and MatWorks ranges (excluding Premier).
The unique Fusion finish ensures that the logo will not deteriorate in UV, wet or damp conditions providing a unique and cost-effective alternative to other logo systems.
Flame Properties: Cfl
Colours: 4 Colourways
Revolutionary Logo & Way Finding Tiles
Workspace Entrance Vulcan
Workspace Entrance Victor
Workspace Entrance Viscount
Workspace Entrance Vixen
Also available in other ranges of Paragon Carpet Tile products
59
cleaning guideRollable Primary Matting Systems - Smartscrape and Frameworks
Daily - Vacuum clean
Weekly - Removal of grit, etc. and vacuum clean. Removal of chewing gum
Monthly - Removal of large grit, etc. and vacuum clean. Cleaning of matwell: - roll up mat and extract dirt / grid from under the mat. Check retainer screws at all 4 corners of mat and replace mat after cleaning making sure retainer screws are secure.
Periodically - Removal of large grit, etc.+ vacuum clean. Cleaning of matwell by roll up the mat and extract dirt grid from under the mat. Check retainer screws and replace mat after cleaning making sure retainer screws are secure. Accumulating dirt underneath the mats may undermine the structure of the mat.
Cleaning frequency is subject to amount of traffic, surroundings and weather conditions. Modular Primary Matting Systems Daily - Vacuum clean
Weekly - Removal of grit, etc. vacuum clean. Removal of chewing gum*
Monthly - Remove large grit from the mat well by vacuum cleaning. Thoroughly clean mat well: - Take modules up and extract dirt / grit from under the mat. Replace modules in exact order they came out.
Periodically - Removal of large grit, etc. + vacuum clean.
Cleaning of matwell: - Take up modules extract dirt / grit from under the mat. Check sub floor is sound and replace modules in exact place where they were found. We also recommend that a periodic deep clean using hot water extraction is used to remove deep set dirt within the mat. (Specialist cleaning firms can be recommended just call our sales office on 08456010431 for more information).
Cleaning frequency is subject to amount of traffic, surroundings and weather conditions.
*NB:- removal of chewing gum is best using a proprietory gum removal gel such as that from fleetlight tel:- 02084667848.
Maintenance Specification for MatWorks Entrance Carpets and Carpet Tiles - To maximise the entrance carpet’s aesthetic appeal, performance and life expectancy, it is imperative to ensure at the specification stage that:
1. Carpets will be protected from other site activities during installation and thereafter.
2. Clients understand the enclosed information and that they accept responsibility for correct carpet care. (MatWorks will provide a copy of the Cleaning and Maintenance guide to the end-users address when requested.)
General Cleaning - Daily vacuuming with a rotary brush vacuum cleaner, preferably with an adjustable head, is recommended. It is essential to remove all loose soil daily because if left to build up, the particles of dirt are much harder to remove and are more damaging to the yarn structure, thereby decreasing the life of the carpet.
Entrance Areas are prone to higher traffic levels and higher levels of dirt and moisture. This means that the maintenance program for entrance matting should be more frequent than for general carpeting areas, a ratio of 2 entrance cleans to 1 carpet clean is a general good guide for preventative periodical maintenance.
Depending on the level of trafficking, the carpet should be periodically deep cleaned using high performance hot water extraction equipment. In certain circumstances, for instance excessively stained carpet the cleaning professional may consider a combination between rotary brush and extraction equipment to give improved results. Rotary brush cleaning by itself is not recommended.
A reputable contract cleaner should be used, preferably NCCA registered (for NCCA details telephone 0116 271 9550). It is important that the carpet is deep cleaned at least once a year.
Stain Removal - It is essential to deal with spillages immediately and any subsequent stains as appropriate. In the event of a spillage, immediately blot with a clean absorbent cloth until there is no further transfer from the carpet to the cloth. If any further stain remains or has otherwise been allowed to dry, the method will vary accordingly.
It is recognised that particularly for contract situations, if stains are not dealt with immediately, cleaning staff may not be in a position to identify the type of stain. A good quality, multi-purpose stain remover is therefore very useful, although it must be understood that this will not successfully tackle all types of stains, and wherever possible the chart recommendations should be strictly adhered to (see right). Also any stains left over a period of time become increasingly more difficult to remove and may require several treatments.
In all cases after stain removal the carpet should be allowed to dry completely and then cleaned with a rotary brush vacuum cleaner.
Solvent cleaning of bitumen backed tiles should preferably be avoided. Where this is not possible, extra caution should be taken and only very light surface cleaning should take place.
Special Cases -
Cigarette burns – it is recommended that these are punched out and replaced by a professional carpet fitter.
Major spillages – seek professional advice from a member of the NCCA.
If any of the treatment lists are not successful, seek professional help. The methods are based upon experience and are recommended in good faith. However, we cannot accept responsibility for their use in any specific case.
60
cleaning & maintenance cleaning solutions & methods
Cleaning Method A Type of stain
A liquid detergent such as Granwax spot/stain remover, in accordance with manufacturers instructions. Granwax tel no: 01773 541177
Alcoholic beverages Baby or animal stainsBlood (wet)Coffee, tea chocolateMinerals and Fruit juicesWater based paintFoodFountain pen inkVomitOil based paint or varnishButter and other greasesCooking oils and other oilsOintmentMetal polishTarCream, ice-cream and milk
Cleaning Method B Type of stain
A dry solvent spotter such as Prochem solvall. All inks except fountain pen ink
Cleaning Method C Type of stain
Methylated spirits. Method: Moisten a cloth with the appropriate solvent an dab onto the stain. Carry on using alternate moist and dry cloths until no further stain transfer. Finally, cover the damp area with a thick wad of dry cloths, cover with something heavy and leave for several hours.
Coffee, tea, chocolate
Cleaning Method D Type of stain
A paste made with biological washing powder and mixed to use as little water as possible.Method: Moisten stain with warm water and cover with the paste. Keep moist for approximately 2 hours. Sponge with clean warm water and blot with an absorbent cloth.
Dried blood
Cleaning Method E Type of stain
Scrape off the excess with a blunt edged knife. Use proprietary chewing gum remover. Contact Granwax for advice. Granwax tel no. 01773 541177
Chewing gum Blu-tackPlasticine
61
Frameworks 22C / Princess Dock Liverpool
62
63
MatWorks - part of the NFC Group is committed to UK manufacturing and
the very best environmental practises
64
National FloorcoveringsOur Heritage - Our Future Producing a wide variety of products from entrance matting, fibre bonded carpets for the education market, tufted carpet and tiles for the commercial sector to specialised indoor and outdoor sports surfaces, the group has expertise in all flooring fields.
The family is dedicated to maintaining and developing its UK manufacturing base with customer support. It takes a colossal supply network to ensure a combined 500,000 sq.ft. of facilities run efficiently 365 days of the year. In support of the local community, suppliers are often used in the surrounding vicinity of the factories.
By striving to be No.1 in sustainable design for flooring solutions the family of companies has established strong international export presence in more than 50 countries.
Where tested, the group has BRE ‘A+’ Ratings for its products, being the highest environmental standard currently available.
Across the UK, the group employs over 350 people,
most of which are local to the five manufacturing facilities in
Yorkshire and Derbyshire.
With clients such as Google, Apple, Local Authorities, the Health Service, the Ministry of Defence, there is always a requirement to provide the highest quality products using the most technologically advanced production processes and therefore commanding a route to the future.
National Floorcoverings UK have a strong international export presence in more
than 50 countries.
National Floorcoverings is a UK family owned business which, along
with associated family businesses, has a turnover exceeding £60m.
65
accessoriesDescription:MatWorks frames are available in aluminium and brass, and are designed to anchor into sand and cement screeds for secure site installation. All frames are custom built to fit specific site requirements, with curved shapes available to special order. The recommended MatWorks depth is 19mm for all products except 12mm. For these products we recommend a matwell with 14mm depth.MatWorks frames are supplied in kit form for ease of transport, storage and on-site assembly.
Ramped frames & surface mounted installations:Internal and external ramp frames are supplied mitred and drilled. The surface is ribbed for enhanced grip (ARF 70 must be used with Grid).
T-Bars T-BarsMatWorks T-Bars provide separation between modules to facilitate easy removal for cleaning and reversibility. Tuftiguard T Bars are available in aluminium, brass or PVC and in all PVC colours except Doubloon. Grid T-Bars are available in aluminium. Please note that T-Bars are automatically included in each order. 17.5mm height must be used with Grid.
Framing TMatWorks has a number of framing options to choose from depending on the type of matting selected. Select the type of frame relevant to the mats as listed below the frame.
When specifying use the product code listed by the diagram.
T- Bar profiles for all mats available
2.5
76.0
8.4
66
contacts
Sales
Tel: +44 (0) 1709 763 839 Fax: +44 (0) 1709 763 813 Email: [email protected]
Samples
Tel: +44 (0) 1709 763 805 Fax: +44 (0) 1709 763 813 Email: [email protected]
Divisional Manager Matthew Evans
Tel: +44 (0) 7778 419 035Email: [email protected]
67
NOTES/DRAWINGS
68
69
NOTES/DRAWINGS
70
71
• Commercial Entrance Matting • Health & Safety Specialists • ISO 14001 Accredited • ISO 9001:2000 Accredited • Disability Act Specialist
Farfield Park, Manvers, Wath-upon-Dearne, Rotherham, S63 5DB
T: +44 (0) 1709 763 839 F: +44 (0) 1709 763 813 E: [email protected] W: www.mat-works.co.uk
Marketing/Samples Department:T: +44 (0) 1709 763 805F: +44 (0) 1709 763 813E: [email protected]