maxim brochure
DESCRIPTION
Architectural Raised Panel Entryway DoorsTRANSCRIPT
FFACTORYACTORY PPRIMEDRIMED DDOORSOORS
AADVANCEDDVANCED SMOOTHSMOOTH & & HIGHHIGH GLOSSGLOSS
LLIQUIDIQUID TTOPOP CCOATOAT FFINISHINISH
PPPOWDEROWDEROWDER CCCOATEDOATEDOATED MICROMICROMICRO TEXTURETEXTURETEXTURE
FFFINISHINISHINISH FFFOROROR EEEXTREMEXTREMEXTREME DDDURABILITYURABILITYURABILITY
TM
TM
TM
Architectural Raised Panel Entryway Doors Interior Grade Commercial &
Residential
Unlimited 3-D Designs
Enhanced Performance
3 Finishing Options
The Maxim™ Door Collection offers tremendous design
flexibility and durability, and comes standard with a factory
primer finish that readily accepts a variety of top coats.
The Maxim™ Door Collection is also offered in two distinctive
pre-finishes. The Top Coat™ System uses the latest in high
performance liquid technology. The Bullet Finish™ uses an
innovative powder coat finish for enhanced durability and
reduced maintenance requirements.
Available in 1-3/8” and 1-3/4” door thickness
Sizes up to 3’6” wide and up to 8’0” high
Unlimited custom design options
Solid, one piece wood composite construction
eliminates warping, shrinking and cracking
Engineered hinge edge provides strong screw
holding power
Two distinctive pre-finishes
The Maxim™ door is crafted
out of a specially engineered
wood panel. The nature of this
core material allows virtually
unlimited design and finishing
options that create the illusion
of a stile and rail construction
but with superior performance
and stability.
Unlike traditional stile and rail
construction, where the door is
comprised of many separate
pieces, Maxim™ Doors are
made with solid one-piece
construction. This significantly
increases the stability of the
door and eliminates warping,
expansion and cracking with
changing seasons and humidity.
Maxim™ doors also provide
customers with a product that
has excellent sound reduction
properties over common hollow
core doors.
22
33
TM
For smooth and high gloss
specifications, the Top Coat
System is your best option.
The system uses either the
UltraCure liquid coating
technology or latex paint
finishes which both have have
been formulated for the The
Maxim Collection.
Top Coat offers home builders,
architects, designers and
consumers factory direct
pre-finished, smooth and high
gloss Architectural Raised
Panel Entryway Doors.
Benefits Include:
Endless color selection
Ultra smooth and textured
finishes
Various gloss ranges
Clear coat for added
performance
Imagine the Possibilities
Endless Color Selection
The ultimate finish is The
Bullet Finish. This system uses
DuraSeam™ which is a family
of powder coatings specifically
engineered for The Maxim
Collection.
Powder coating gives
consumers, businesses and
industry one of the most
durable, environmentally
friendly, long lasting, quality
finishes available today.
Benefits Include:
Endless color selection
Durable finishes that
withstand high use
environments
Seamless edges that will not
delaminate
Finishes that contain no
volatile organic compounds,
lead or solvents
Antimicrobial coatings
available upon request
Various finishes including
textures, clear coats and
specialty finishes
44
TM
66
Maxim doors are used
in residential homes
and enhance the
value of a home while
offering unlimited
architectural design
and function.
MAXIM Collection @
Work
77
Maxim doors are
used in budget
hotels. Even weary
business travelers
appreciate the
reliable
performance,
sturdy design and
sound deadening
properties of Maxim
Doors in their hotel
room.
MAXIM Collection @
Work
88
Maxim doors are
used in hospitals.
For unique
architectural
challenges, ask us
about our custom
engineering,
endless color
options and
antimicrobial
coatings.
MAXIM Collection @
Work
As part of our industry leadership, we embrace
our responsibility to the environment and our
customers. At Trinity Innovations, we fulfill our
responsibility by using sustainable raw materials
and processes, and are committed to driving the
development of new environmentally advanced
technologies. We seek out partners who embrace
our sustainability vision.
Behind every Maxim™ Door is a philosophy that
the quality of human life is dependent on both
economic vitality and a healthy and sustainable
environment. We believe that respecting both the
indoor and outdoor environment is not just good
business - it’s the right thing to do.
Sustainable materials, such as MDF (medium
density fiberboard), is made from 100% recycled
wood fibers. Maxim Doors are also available
with MDF containing no added formaldehyde
(NAF) for enhanced indoor air quality.
FSC certification is also available for Projects
seeking LEED accreditation or for other
environmental requirements. The Bullet Finish™
is achieved with DuraSeam™, which is a
specially formulated and patented powder finish
containing no solvents, lead, VOC’s or
Hazardous Air Pollutants.
We are proud of our Environmental Commitment
and will continue to lead the industry in offering
environmentally friendly and sustainable
products!
1010
101 102 103 104
111
100
106 107 108 109
SSTANDARDTANDARD DDESIGNSESIGNS
1111
105
110
CCUSTOMUSTOM DDESIGNSESIGNS & C& COLORSOLORS AAVAILABLEVAILABLE UPONUPON REQUESTREQUEST
IINFOMATIONNFOMATION
1111
Advantages of Maxim™ Doors
Maxim doors are available in 20,
45, 60, and 90 minute fire label for
structures requiring a fire rated
door. Trinity Innovations, as an
option, will also machine the doors
for hinges, lockset, and deadbolts
on request.
Maxim doors are all seamless with
no stile and rail separation
possible. Every door carries a
limited lifetime warranty.
Seamless construction eliminates
joint bleed through after the final
finish coat is applied. This is a
major advantage over traditional
stile and rail doors.
Size Selections
Thickness Height
1 3/8” 6’-8”
1 3/4” 7’-0”
8’-0”
Width Width
1’-0” 2’-4”
1’-4” 2’-6”
1’-6” 2’-8”
1-8” 2’-10”
2-0” 3’-0”
Wood Edge
A solid poplar wood edge insert is
an option for extra holding power
when installing the hardware. All
Doors with wood edges must be
pre-drilled prior to installation.
Double wood edges are also offered
for all doors.
Trimming
Trim only the bottom edge. All
Maxim doors have a chamfered
edge when leaving the factory.
Trimming in excess of more than
1” voids the warranty. To re-
chamfer door edges use 150 grit
sandpaper and sanding block.
Storage
Do not lean a Maxim door against
a wall unless it is pre-hung. Doors
must be stored flat with minimum
of three supports under 6’8” door or
four supports for 7’ and 8’ doors.
This applies to job site or ware-
house storage. If a door warps, it
usually can be corrected by laying
a flat surface with the bowed side
down for 24-48 hours. Warp of 1/4”
or less on a 6’8” door and 3/8” or
less on a 7’0” and 8’0” door is not
consider a defect
WWARRANTYARRANTY IINFOMATIONNFOMATION
1111
The following warranty applies to all products sold under the Trinity Innovation and Maxim brands. This warranty
is IN LIEU OF any warranty, express or implied but not limited to, any implied warranty of MERCHANTABILITY
or fitness for a particular purpose.
Maxim Door Limited Warranty
Subject to the limitations and exclusions described herein, Maxim Door warrants to the original purchaser of a
Maxim door that the Product shall be free from defects in material and workmanship. This warranty is for the life of
the product and becomes effective on the date of the initial installation of the product. This warranty shall expire
and become null and void upon the sale or transfer of the product to anyone other than the original purchaser.
Limitations on the warranty
The warranty does not cover: (a) exterior installations, (b) normal wear and tear, (c) damage resulting from abuse,
neglect, misuse, or as a result of any Accident or act of God; (d) improper installation or maintenance, including, but
not limited to damage resulting from bowing or nonalignment in the frame or jam in which the door is hung; (e) any
product that is purchased from the manufacturer without the factory prime coat; (f) any Product that is over three-
feet (3’) in width and/or eight-feet (8’) in height; (g) warp not exceeding ¼” in the plane of the door itself for doors
three-feet (3’) X eight-feet (8’) or smaller; (h) damage due to trimming more than one-inch (1”) total of the Product;
(i) damage resulting from the failure to seal all six (6) sides of the Product with an acceptable finish topcoat (s), im-
mediately after fitting and hanging; (j) damage resulting from the failure to maintain the finished topcoat (s) on all
six (6) sides of the Product; (k) variations or unsatisfactory results in gloss level, texture or appearance resulting
from the field application of paint or other finishing material; (l) cost of labor, installation removal or finishing of the
replacement door panel; (m) products altered without Maxim Door’s prior written consent; or (n) doors shipped out-
side of the continental US, Hawaii, Alaska or Canada. Limitation of Remedies
The purchaser’s exclusive remedy against Trinity Innovations shall be for the repair or replacement of the Product
or, at Trinity Innovations exclusive option, refund of the purchase price. No other remedy (including but limited to,
incidental damages or consequential damages for lost profits, lost sales, injury to person or property, or any other
incidental or consequential loss, whether arising out of breach of contract, breach of warranty, tort or otherwise)
shall be available to the purchaser.
Trinity Innovations reserves the right to have a Trinity Innovations representative field inspect the Product within
(30) days of receipt of a claim. Any returned product that is replaced or refunded is and shall be the property of
Trinity Innovations.
Obligation of Purchaser
Claims under this warranty must be made in writing, with proof of purchase and prior to any repair work, to:
Trinity Innovations
1079 Sunrise Ave
Suite B312
Roseville, CA. 95661
If you have any questions about this warranty contact Trinity Innovations at (866)-622-6364
EXCLUION OF IMPLIED WARRANTIES
ALL IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAT PURPOSE, ARE EXCLUDED AND DO NOT APPLY TO THE PRODUCT
The ultimate Green
Solution for architectural
raised panel doors
Contact Information
(866)-622-6364
Address
1079 Sunrise Ave
Suite B-312
1212
Roseville California 95661