mayfield® infinity support system (a-1112)infinity support system using a mayfield skull clamp the...
TRANSCRIPT
October 2005 Integra LifeSciences NS969-10/05 1
MAYFIELD® Infinity Support System (A-1112)
Quick, easy set-up
instructions
October 2005 Integra LifeSciences NS969-10/05 2
Infinity Support System - Quick Easy Set-up Instructions
The Infinity Support System attaches to any
MAYFIELD® Base Unit to provide a method
for simultaneous application of a head
support (Adult, Pediatric or General Purpose)
and a skull clamp (patient ages 5+)
– This is especially important for patients who
require a low clamping force to stabilize the
position of the head.
October 2005 Integra LifeSciences NS969-10/05 3
Infinity Support System - Quick Easy Set-up Instructions
The Infinity head
supports can be
positioned close to the
OR table, important for
patients with short neck
lengths.
October 2005 Integra LifeSciences NS969-10/05 4
Infinity Support System - Four Components make up the System
Infinity Coupler
Infinity Adult Horseshoe Headrest
Infinity Pediatric Horseshoe Headrest
Infinity General Purpose Headrest
October 2005 Integra LifeSciences NS969-10/05 5
Infinity Coupler (419B1010)
Coupler easily mounts to any
MAYFIELD Base Unit.
Head supports can be
adjusted vertically and
laterally for flexibility in
patient positioning, then
securely locked in place.
Position of head support can
be tilted on ball socket joint
and locked in place.
Gear Rack Assembly
Gear Housing
Locking Knob
Lock Knob
October 2005 Integra LifeSciences NS969-10/05 6
Infinity Adult Horseshoe Headrest (419A1031)
Provides cranial support for
adults and older children in
either prone or supine
positions.
Adjustable pad base
(faceplates) accommodates
various head sizes.
Fluid resistant gel pads
provided for comfort and
reduction in the incidence of
necrosis.
October 2005 Integra LifeSciences NS969-10/05 7
Infinity Pediatric Horseshoe Headrest (419A1030)
Provides cranial support in
either prone or supine
positions for infants and
young children.
Same benefits of the Infinity
Adult Horseshoe.
October 2005 Integra LifeSciences NS969-10/05 8
Infinity General Purpose Headrest (419A1050)
Provides cranial support in
either supine or semi-sitting
procedures.
Mini gel pads can be
positioned in multiple
receptacles and can be titled
on their hinges.
October 2005 Integra LifeSciences NS969-10/05 9
Infinity Support System - Assembly of the System
Assembly of the Infinity Coupler to the
MAYFIELD Base Unit of your choice.
1. Slide Coupler onto Base Unit
2. Place desired Headrest into Coupler
3. Position Coupler with Headrest to Base Unit
Supports
4. Secure Infinity into place
October 2005 Integra LifeSciences NS969-10/05 10
Infinity Support System - Assembly of the System
Slide Coupler onto Base
Unit
– Place the Coupler onto the
Base Unit with the Gear Rack
Assembly towards the top and
the Gear Housing Lock Knob
facing the OR table.
(Note: Do not lock into place
until Headrest is in position.)
– Secure the Base Unit to the
OR table as you normally do.
October 2005 Integra LifeSciences NS969-10/05 11
Infinity Support System - Assembly of the System
Place Desired Headrest
into Coupler
– Choose desired Headrest
and firmly place into Gear
Rack Assembly.
– Tighten the Gear Rack
Assembly to secure the
Headrest in the Coupler.
October 2005 Integra LifeSciences NS969-10/05 12
Infinity Support System - Assembly of the System
Position Coupler with
Headrest to Base Unit
Supports
– Secure the Coupler to the
Base Unit Supports by
tightening the two lock knobs
on the Coupler.
(Note: Position the Headrest
as close as possible to the OR
table for optimal support)
October 2005 Integra LifeSciences NS969-10/05 13
Infinity Support System - Assembly of the System
Secure Infinity into
place
– By tightening the Gear
Housing Lock Knob,
movement will be
restricted.
– Lateral adjustments for
head size are made
using the knob located
just under gel pads.
October 2005 Integra LifeSciences NS969-10/05 14
Infinity Support System Using a MAYFIELD Skull Clamp
The Infinity Support System provides total support of the patient’s head. Many times, for many procedures, surgeons require the patient’s head to be stabilized or fixed while doing image-guided surgery or other delicate procedures.
The design of the Infinity Support System allows for the use of a MAYFIELD Skull Clamp in conjunction with the Infinity Support System… providing the needed stabilization and fixation.
October 2005 Integra LifeSciences NS969-10/05 15
Infinity Support System Attachment of the MAYFIELD Skull Clamp
With the patient positioned on the Infinity Support System Headrest, apply the MAYFIELD Skull Clamp to the patient’s head in the same manner as you would normally.
Special considerations should be made to position the skull pins properly on the patient’s head as per the product insert. It is also important to position them away from the surgical site but within the “sweatband” area of the head.
October 2005 Integra LifeSciences NS969-10/05 16
Infinity Support System Using a MAYFIELD Skull Clamp
With the skull clamp affixed to the patient’s head, rotate the clamp down underneath the headrest and then bring up the swivel adaptor and transitional member for connection to the Base Unit.
Once in position, lock the handle and tighten all locking knobs.
October 2005 Integra LifeSciences NS969-10/05 17
MAYFIELD® Infinity Support System (A-1112)
We appreciate your time and attention.
Please contact us with any questions.
Customer Service can be reached at
1-877-444-1114 or 513-533-7979.