md-1210cmx manual

8/13/2019 MD-1210CMX Manual

1/20

OWNER S MANUAL

12.1 TFT-LCD DVD/SD/USBCOMBO MONITOR

M

PLAY AV MENU

POWER

MD-1210CMX


2/20


3/20

Contents

3

Caution

Features and Controls

Power and Mode Selection

Releasing The Monitor

Mute Function

Picture Control

Contrast/Brightness/Color/FM

DVD Setup

Setup Menu

General Setup

TV Aspect RatioAn gl e V ie wi ng

OSD Language

Screen Saver

Au di o Se tu p

Dolby Digital Setup

Equalizer SettingsVideo Setup

Quality

Preferences Setup

TV TypePB CAu di oSubtitleDisc MenuParentalDefault

Password SetupPassword Mode

Password Change

4

6

8

10

12

13

14

16

21

22

23

6

12

18

21212121

22

22

2323

DVD Functions

Eject

Vol+/Vol-

Mute

Play or PauseAu di o

Stop

Ar ro ws

Setup

Menu

Display

Number Buttons

Subtitle

Title

SlowFast Reverse Searching

Fast Forward Searching

Previous

Next

Repeat A-B

Repeat

NTSC/PALAn gl e

PB C

ZoomGO TO

Connection Diagram

Installation

Disc Information

Troubleshooting

Specifications

24

24

24

24

25

26

27

27

28

29

30

31

24

24

2525

25

26

27

28

29

29

3030

31

31

34

35

36

37

10

10

10

Turning on The Monitor

11AV m od e

13

14

14

15

15

16

18

Remote Control

Monitor/DVD Player

14

33

SD/USB Functions 32


4/20

Caution

Please read and observe all warnings and instructions in this manualand those marked on the unit. Retain this booklet for future reference.

There are two kinds of alarm symbols as follows:

WARNING

WARNING

CAUTION

The lightning bolt with arrowhead inside in an equilateraltriangle is intended to alert the user to the presence of

dangerous voltage within the product s enclosure that may beof sufficient magnitude to constitute a risk of electric shock topeople.

The exclamation point inside an equilateral triangle is intendedto alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanyingthe product.

Installation of all TV monitorsmust be out of the driver sfield of vision.

Do not try and service thesep ro du ct s y ou rs el f, aqualified service center orfactory service center for allrepairs.

locale

Be careful not to drop orapply under pressure to thefront panel of your videomonitor. If the screen cracksdue to misuse, your warrantywill be void!

Do not mount the product whereit will obstruct the deployment ofthe airbag or in an area where it

would affect the driver s abilityto control the vehicle. Also becareful to avoid mounting theproduct where it can becomehazardous during sudden stopsor in the event of an accident.

Use extra caution with any liquidsin your car. If you or your childspills any liquid on these products,pull your vehicle to the roadsideand turn the key off to disconnect

or wipe the products with a towel. Do notoperate the equipment until all liquids haveeither evaporated or you have had the monitorinspected at a service center by a qualifiedtechnician. Severe harm or danger can result.

Use only a damp cloth to cleanthe screen and use only purifiedwater on the cloth. wring out allexcess water prior to wiping the

screen. Do not use any cleanersor chemicals to clean the screen.In most cases a dry cloth will do!

POWER AV

M EN U

,

4

,

37

D C 1 2 V

4 : 3

2 4 0 0 x 6 0 0

N T S C / P A L A u t o S e l e c t

D V D - A V 1 - A V 2

1 E A

W i t h s h r o u d : 1 5 . 1 ( L ) X 1 3 . 9 ( W ) X 3 . 5 ( H ) i n c h e s

Power

Screen Format

Resolution Pixel

Color System

A/V Input

A/V Output

Dimension

Note: This equipment has been tested and has been found to complywith the limits for a Class A digital device, pursuant to part 15 of theFCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment is operated in acommercial environment. This equipment generates, uses, and canradiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference

to radio communications. Operation of this equipment in a residentialarea is likely to cause harmful interference. In some cases, the user willbe required to correct the interference at his own expense.

SPECIFICATIONS

W i t h o u t s h r o u d : 1 4 . 8 ( L ) X 1 3 . 6 ( W ) X 2 . 5 ( H ) i n c h e sDimension


5/20


6/20

M

PLAY AV MENU

POWER


6

Disc Information

DVD features

DVD discs provide high-resolution images with high-quality sound. This DVD playercan play not only DVD discs of various versions, but also S-VCD, VCD, audio CD andMP3 discs.

Discs that cannot be played

DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. Inaddition, a CD or a CD-RW which was recorded on special software cannot be played.

Region code

Your DVD player is designed and manufactured to region management informationthat is recorded on a DVD disc. Please check the region code.1: North America 2: Japan 3: Korea and Southeast Asia4: Australia, Mid & South America 5: Russia 6: China

How to handle the disc

Don t touch the shiny side of the disc (the side with the embedded information).Don t stick a label or a glue-based note on either side of the disc.Don t use discs that have glue or a damaged label with exposed adhesive residue.It might result in damage to your DVD player.Don t put discs in the sunshine.

Park your car in the shade.

How to handle the discs

Only use round discs. Discs with other shapes like a star, a heart, etc. may causedamage to the player. If a disc is dirty, wipe softly with a wet cloth and then with a dryone. Before playback, wipe the disc outward from the center with a clean cloth. Do notuse any type of solvent such as thinner, benzene, commercially available cleaners or

antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.

35

Remote Control

Wireless Headphones(Not Included)

Monitor/DVD Player

MONITOR

Vol+

Vol-

Monitor/DVD Player


7/20


7

Installation

34

M

PLAY AV MENU

POWER

Caution

Do not bring magnetic devicessuch as credit cards or magneticcards near the monitor.

....X

Dome Light Button

POWER Button

AV Select Button

MENU Button

+/- Buttons

PLAY/PAUSE Butto n1. Open the package and check that these items are presents.

INSTALLATION PLATE UNIT SCRE W A SCREW B

2. Connect the external compoments to the RCA cable or AV output.(Refer to the connection diagram on page 33)

3. Match the position of installation bracket andinstallation plate with screw A.

4. Tighten the unit with the suppliedscrew B.

EJECT ButtonDisc loading slot

SD Input USB Input

M

PLAY AV

MENU

POWER

Dome Light Button

FAST Forward/Reverse Button

RESET

R LA U DI O V I DE O

AV2 INPUTS

SD USB


8/20


9/20

9


32

SD/USB Functions

A- B (r ep ea t fr om A t o B )

VOL-/+ button

AU DI O

ENTER

ZOOM

UP/DOWN/RIGHT/LEFT ARROWS

PLAY/PAUSE

GO TO

STOP

SKIP FORWARD/BACK

FAST FORWARD/REVERSE PLAY

Use these buttons to select either fastforward or fast reverse playback.

Use this button to select the beginningand end of a track which you wish to haverepeat in playback.

Use to incease or decrease volume level.

Use this button to select one of theaudio soundtracks programmed on aDVD disc. It is alse used to select the

audio output mode for the DVDplayback.

Press this button to confirm the itemyou have found and highlighted usingthe arrow buttons. Usually this is doneto confirm a selection or item to beplayed on the DVD.

If your DVD disc supports zooming in

to see the program differently, pressingthis button will enable you to changethe amount of zoom.

Use thes buttons to navigate thevarious menus and screens for themonitor and DVD systems.

To start playback of a disc, press thisbutton. Press again to pause theplayback. If playback is paused, press

this button to resume playback.

Use to search for a title or a chapter onyour DVD disc.

Press this button to stop the playbackof the current disc.

Use these buttons to skip to the nextor last track, chapter or file on thedisc in the player.

R ET U R N

SET U P

Press this button to display the Setupmenu. The Setup menu enables youto enter the settings required for theunit to work properly.

REPEAT

Press this button to change the playbackmode to repeat.

Press this button to return to the root menu

1. When USB or SD is inputed, the monitor will be displayed as shown below. But whenyou input USB that the function can not change into SD state (only the SD is

moving). And you can select the desired menu by

2.

pressing the MODE button on theremote control of monitor.

Use the (arrow and ENTER) buttons to select and set desired settings.

00:00

000/003

00 :0 0 k bp s

S

\

..

..


10/20


11/20

Power and Mode Selection

11

DVD Functions

Repeat

Pressing REPEAT button changesthe play mode as follows:

[DVD]

OSD CONDITION

Chapter

Title

Al l

Repeat chapter

Repeat title

Al l

Repeat off

[VCD]

The REPEAT button does not functionwhen a VCD disc is being played.


[AUDIO]

OSD CONDITION

Track

Al l

Repeat single

Al l

Repeat off

[MP3]


OSD CONDITION

Repeat One

Repeat Folder

Folder

Single

Repeat folder

Al l

Random play

Shuffle

Random

Single

Repeat folder one time

Single play

NTSC/PAL

This button is used to select the video standard for the DVD mode between NTSCand PAL formats.

Angle

Some DVD s are recorded with additional footage which allows you to view a scene

from a different camera angle. If the ANGLE feature is enabled in the Setup Menu(see page 14) and the disc has this option,an angle mark will be displayed onthe screen. When that occurs, press the ANGLE button to see these alternate viewingangles.

30

Selecting an AV mode

1. Turn the power ON on the unit and on the external devices.

2. Select th e DVD, AV1 or AV2 mode by pre ssing the AV Select button onthe unit or on the remote control.

3. Play the external device.


12/20

Picture Control

12

DVD Functions

Prev( )

Press this button to advance the player from the current chapter.

to the previouschapter

[DVD]/[VCD]

[AUDIO]/[MP3]

Press this button to move to the previous track.

Next( )

P re ss th is b ut to n to a dva nce th e p la ye r f rom t he cu rre nt ch apt er .to the next chapter

[DVD]/[VCD]

[AUDIO]/[MP3]

Press this button to move from the current track .to the next track

Repeat(A-B)

You can set the player to repeat a segment over and over until you cancel it. To dothis, you mark the beginning of the desired segment (A) and the end of segment (B).The selected segment will berepeated automatically until canceled.

[DVD]/[VCD]/[AUDIO]

29

OSD CONDITION

A

A B

Start point of repeat

Ending point repeat function

To adjust CONTRAST, BRIGHTNESS, COLOR or FM pr ess the MENU butto n untilyou arrive at the screen for that item. Use the arrow buttons to adjust the value.Press the MENU button to make another adjustment or leave the MENU system.

Contrast/Brightness/Color/FM

CONTRAST

BRIGHTNESS

COLOR

50

50

50

1. Bring up the on-screen function menu by pressing the MENU button on the unitor the remote control.

2. Press the MENU button on the unit or the remote control of monitor until you seethe item you wish to adjust.

3. Use the arrow buttons to adjust the value.

4. Press the MENU button to make another adjustment or leave the MENU system.

FM

87.7

(FM function added 87.7 87.9 88.1 88.3 88.588.7 88.9 89.1M H z)


13/20

DVD Setup

Setup Menu-Main PageWhen the button is pressed, the setup menu will be displayed as shownbelow. Select the menu category and make changes according to your preferences.

SETUP

1 . P re ss t he b ut to n i f t he d is c i s p la yi ng .STOP

2 . P re ss t he b ut to n t o d is pl ay s et up m en u.SETUP

3. Use the (arrow and ENTER) buttons to select and set desired settings.

4. Press the button again to turn off the setup menu.SETUP

13

TV DisplayV DisplayAn gl e Ma rkngle MarkOSD LangSD LangScreen Savercreen Saver

PSOnENGOn

Go To General Setup Pageo To General Setup Page

General Setup Pageeneral Setup Page

DVD Functions

Fast Reverse Searching( )

Pressing FR button repeatedly changesthe play mode as follow:

[DVD]

OSD CONDITION

FR 2X

FR 4X

FR 8X

2X rewind search

4X rewind search

Pressing FR buttonchanges the play mode as follow:

repeatedly

[AUDIO]

[MP3]

Pressing FR buttonchanges the play mode as follows:repeatedly

FR 16X

FR 32X

PLAY

8X rewind search

16X rewind search

32X rewind search

Play

OSD CONDITION

FR 2X

FR 4X

FR 8X

2X rewind search

4X rewind search

FR 16X

FR 32X

PLAY

8X rewind search

16X rewind search

32X rewind search

Play

OSD CONDITION

FR 2X

FR 4X

FR 8X

2X rewind search

4X rewind search

FR 16X

FR 32X

PLAY

8X rewind search

16X rewind search

32X rewind search

Play

Fast Forward Searching( )

Pressing FF button changesthe play mode as follow:

repeatedly

[DVD]

OSD CONDITION

FF 2X

FF 4X

FF 8X

2X forward search

4X searchforward

Pressing FF buttonchanges the play mode as follow:

repeatedly

[AUDIO]/[VCD]

[MP3]Pressing FF buttonchanges the play mode as follows:

repeatedly

FF 16X

FF 32X

PLAY

8X searchforward

16X searchforward

32X searchforward

Play

OSD CONDITION

FF 2X

FF 4X

FF 8X

2X forward search

4X searchforward

FF 16X

FF 32X

PLAY

8X searchforward

16X searchforward

32X searchforward

Play

OSD CONDITION

FF 2X

FF 4X

FF 8X

2X forward search

4X searchforward

FF 16X

8X searchforward

16X searchforward

28

FF 32X

PLAY

32X searchforward

Play


14/20

DVD Setup

General Setup1. TV Aspect RatioIn the Setup function called TV Display, you set the player to output the video signal at thesame aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B(Letterbox).

Normal / PS 4:3 PAN SCANChoose this setting if you want the movie to fill the entire screen.(This might mean that the left and right edges won t be seen)

Normal / LB 4:3Choose this setting if you want to see the movie in its original aspect ratio.(The movie might appear with black bars at the top and bottom of the screen.)

Wide 16:9 WIDE SCREENChoose this setting if your DVD Player is connected to a widescreen TV.(This opition is available only if the disc has a 16:9 display aspect ratio.)

2. Angle ViewingSome DVD discs contain programming which allows youto view a scene from a few different camera angles. Youcan tell when a scene is so recorded when an Angle Markis displayed on the screen. This mark will only appear if youhave enabled the Angle Mark featurein the DVD Setup menu.

On: When selected, the screen will be shown with

angle mark.

Off: When selected, no angle mark is shown onthe screen.

3. OSD Language

Use this option to set the OSD language.When selected, change to set the on-screen displaylanguage.

14

Ang le M arkngleMarkOSD LangSD LangScreen Savercreen Saver

OnENGOn

Set TV Display ModeetTV Display Mode

General Setup Pageeneral Setup PageNormal/LBWide

TV DisplayV Display PS Normal/PS

OSD LangSD LangScreen SavercreenSaver ENGOn

Set Angle MarketAngle Mark

General Setup Pageeneral Setup Page

OffTV DisplayV Display PS

Ang le M arkngle Mark On On

Screen Savercreen Saver On

Set OSD Languageet OSDLanguage

General Setup Pageeneral Setup PageTV DisplayV Display PS

Angl e Ma rkngle Mark OnOSD LangSD Lang ENG

EnglishKorean

FrenchGerman

ItalianSpanish

PortugueseDutch

EnglishKoreanFrenchGermanItalianSpanishPortugueseDutch

DVD Functions

Subtitle(SUB-T)

This button is used to select the language for the on-screen display system.(This title menu may vary, depending on the particular DVD.)

[DVD]

OSD

1 / 2

Title

Slow( )

27

Used to display the title menu of the loaded DVD disc.This function is only present on discs which support it.

[DVD]

[DVD]/[VCD] CONDITION

1 / 4

1 / 8

2X slow forward

4X slow forward

8X slow forward

Use this button to play a disc in slow-forward orslow-reverse. Slow playback can be done at fivedifferent speeds. Pressing this button repeatedlydecreases the speed in steps. Pressing a sixthtime returns playback to the normal speed. 1 / 16

1 / 2

1 / 4

1 / 8

1 / 16

Play

16X slow forward

2X slow rewind

4X slow rewind

8X slow rewind

16X slow rewind

Play

1 / 32 32X slow forward

1 / 32 32X slow rewind


15/20

DVD Setup

Audio Setup

4. Screen Saver

The screen saver is useful to prevent your displayfrom becoming damaged. The screen saver pictureappears when you leave the DVD player in stop modefor about two minutes.

15

Ang le M arkngleMarkOSD LangSDLang OnENG

Screen SavercreenSaver

General Setup PageeneralSetup PageTV DisplayV Display PS

Go To Speaker Setup Pageo To Speaker Setup Page

Au di o Se tu p Pageudio Setup PageSpeaker Setup

SPDIF Setup

Dolby Digital Setup

Channel Delay

Equalizer

3D Processing

Speaker SetupSPDIF SetupDolby Digital SetupChannel DelayEqualizer3D Processing

OffScreen Savercreen Saver On On

DVD Functions

Display

P re ss in g t he D IS PLAY o n t heremote control changes the play mode asfollows:

button[DVD]

OSD CONDITION

Title Elapsed

Title Remain

Chapter Elapsed

Display the Title Elapsed

Display the Title Remain

Display the Chapter Elapsed

[VCD]

Whenever press the button,title chapterwill be displayed as follows:

Pressing the display button displaysinformation about the current CD on thescreen as follows:

[AUDIO]

OSD CONDITION

Single Elapsed

Single Remain

Display the single elapsed

Display the single remain

Display the total elapsed

[MP3]Your DVD player will display the counterautomatically when you play the MP3 disc.

Number Buttons

The 0 through 9 number buttons are used to enter the number of the track, the numberof the DVD chapter, the time, the date, etc.

26

OSD CONDITION

Single Elapsed

Single Remain

Display time

Left display time

No sign

Chapter Remain

Display Off

Display the Chapter Remaining

No sign

Display Off

Total Elapsed

Total Remain Display the total remaining

[DVD]

Select a track by pressing thecorresponding number button.

[AUDIO]

You can select a track in the folder by

pressing the corresponding number button.

[DVD]

OSD CONDITION

Se le c t T ra ck : __ Se le ct t r ac k n o

OSD CONDITION

__ :_ _ Se le ct tr ac k no


16/20

Dual MonoUse this function to set the input audiosignal to match your speaker setup.

DynamicUse this function to change the settingfrom the factory.

Set DRC OffetDRC Off

Dual Monoual Mono STRDynamic

Dolby Digital Setupolby Digital SetupL-MonoR-Mono

Dual Monoual Mono Stereo

Mix-Mono

Dolby Digital Setupolby Digital SetupDynamic

FULL

3 / 4

1 / 2

1 / 4

OFF

1. Dolby Digital Setup

Dynamic

Dual Mono (1 + 1) Setupual Mono 1 + 1 Setup

Dolby Digital Setupolby Digital SetupL-MonoR-Mono

Dual Monoual Mono STR Stereo

Mix-Mono

DVD Setup

Show below are two examples of Audio Setups.

Go To Dolby Digital Setupo ToDolbyDigital Setup

Aud io Set up Pag eudio Setup PageSpeaker SetupSPDIF SetupDolby Digital Setup

Channel DelayEqualizer3D Processing

Speaker SetupSPDIF SetupDolbyDigital SetupChannelDelayEqualizer3D Processing

Set Stereo Setupet StereoSetup

STR

16

Go To Equalizer Pageo ToEqualizerPage

Aud io Set up Pag eudio Setup PageSpeaker SetupSpdif SetupDolby Digital SetupChannel DelayEqualizer3D Processing

Speaker SetupSpdifSetupDolbyDigital SetupChannelDelayEqualizer3D Processing

2. Equalizer Settings

Bass Boostass BoostSuper BassuperBassTreble Boostreble Boost

OffOffOff

Select Equalizer Typeelect Equalizer Type

Equalizer Pagequalizer PageRockPopLiveDanceTechnoClassicSoft

EQ TypeQ Type None None

DVD Functions

Stop( )

In DVD mode, Press STOP to stop playback.To resume playbac k, press PLAY/PAUSE. Ifyou press STOP and then PLAY/PAUSE twice,the player will begin playback at the firstscene of the movie.

[DVD]/[AUDIO]

In MP3 mode, Pressing STOP will stopaudio playback. Press PLAY/PAUSE to beginplayback of the first title on the disc.

th e

[MP3]

Menu

Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,depending on the programming of the disc.

25

[DVD]

OSD CONDITION

1 Time Press Play Key To Continue Stop

OSD CONDITION

1 Time Stop Stop

Arrows( / / / )

In addition to navigating the various menus, you can use the arrow buttons to define the areaof the screen you want to enlarge in ZOOM mode.

[DVD]

Af te r pr es si ng ST OP bu tt on , se le ct th e de si re d f ol de r an d s et th e co nd it io n by pr es si ngENTER button.

Disc Stop2 Time

Setup

Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVDsettings to suit your equipment and preferences.

[MP3]


17/20

DVD Setup

EQ Equalizer TypeIn this menu you can choose the desired preset

equalizer mode.(Choose from Rock, Pop, Live, Dance, Techno,Classic or Soft)

Bass Boost

The Bass Boost function increases the volumelevel of the bass frequencies.

Super BassSuper Bass Boost further increases the volumelevel of the bass frequencies.

Treble BoostTreble Boost increases the volume level of the upperfrequencies.

17

Bass Boostass BoostSuper BassuperBassTreble BoostrebleBoost

OffOffOff

Select Equalizer TypeelectEqualizerType

Equalizer PagequalizerPageRockPopLiveDanceTechnoClassicSoft

EQ TypeQ Type None None

Super BassuperBassTreble BoostrebleBoost OffOff

Boss Boostoss Boost

Equalizer PagequalizerPageEQ TypeQ Type None

OffBass Boostass Boost Off On

Treble Boostreble Boost Off

Super BassuperBass

Equalizer Pagequalizer PageEQ TypeQ Type None

OffBass Boostass Boost Off OnSuper Bassuper Bass Off

Treble BoostrebleBoost

Equalizer Pagequalizer PageEQ TypeQ Type None

Off

Bass Boostass Boost OffOnSuper Bassuper Bass OffTreble Boostreble Boost Off

DVD Functions

Eject

Audio

Change the audio output format.(A the disc supports available audiotype.)

vailable only if

24

[DVD]

Changes the audio output format.(Available only of the disc supports available audiotype.)

[VCD]/[AUDIO]

OSD CONDITION

Mute Mute

Mute offMute off

Vol+/Vol-

Use these buttons to adjust the audio output level of the speaker from 0 to 100.

Mute

Press MUTE to turn off the audio part of thecurrently playing program. Press it again toreturn the audio volume to the level at whichyou were last listening.

OSD CONDITION

Play Disc

Pause

Play or Pause( )

When this button is pressed, the disc is ejected. When this button is pressed for morethan 3 seconds, the disc is unconditionally ejected. Use this function if you encounterdifficultly ejecting a disc.

An in va li d bu tt on pr es s.

[MP3]

OSD CONDITION

2 Channel

5.1 Channel

1 / 2 : Ac3 2CH English

2 / 2 :Ac3 5.1CH English

OSD CONDITION

Stereo

Mono Left

Stereo

Mono Left

Mono Right

Mix Mono

Mono Right

Mix Mono

Whenever this button is pressed, the modeswitches from pause to play or play to pause.


18/20

DVD Setup

Video Setup

Sharpness can be adjusted by highlighting it in the menu and then using theUP/DOWN arrow buttons to increase or decrease the sharpness.

In the Video Setup, you can make adjustments to various elements of the picture quality.

18

BrightnessContrastGamma0000None

Color

Vi de o Q ua li ty Set upideo Quality SetupMediumLow

Color MID High

HueSaturationLuma DelayumaDelay

00001 TT

Picture Quality

Vi de o S etu p P ag eideo Setup PageC om po ne nt Y UV

Quality

Divx VOD

Component YUVQualityDivx VOD

Go TO Video Quality Setup Pageo TO Video QualitySetup Page

DVD Setup

Password Setup

1. Password Mode

In the Password setup, you must first enter the current 6-digit passcode, andthen you have the opportunity to change it. The factory default passcode is .

Once you have changed and confirmed the password, press the ENTER button.

136900

2. Password Change

23

Password

Password Modeassword Mode

Password Setup Pageassword Setup PageOffPassword Mode Onassword Mode On On

Change Passwordhange Password

Password Setup Pageassword Setup PagePassword Mode Onassword Mode On OnPassword Change Old Password

New Password

Confirm PWD

OK

Password Setup, which is required for using the Parental Controls settings,is divided into two modules: Turning on the Password function, and settinga Password. The first step is to turn it on in the Password Mode setting.


Color

Vi de o Q ua lit y S et upideo Quality SetupMediumLow

Color MID High

HueSaturationLuma Delayuma Delay

00001 TT

Brightness

Use this option to adjust the display brightness. When you reach desiredbrightness level, use the / buttons and press the ENTER button.

Vi de o Q ua lit y S et upideo Quality Setup


00001 TT

Brightness

Brightness 0


Color MID

Brightness

Please Enter Old Passwordlease Enter OldPassword


19/20

ContrastUse this option to adjust the contrast level.

Use the / buttons and press the ENTER button, when you reach thedesired contrast level. The contrast control increases or decreases the ratio ofbright and dark screen sections.

BrightnessGamma

00None

Contrast

Vi de o Q ua lit y S et upideo Quality SetupColor MID


00001 TT

Contrast 00

Contrast

Contrast 0

DVD Setup

19

DVD Setup

Use the Disc Menu option to select the displaylanguage for a DVD s disc menu display language.(not the same as the players menu)

1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Disc Menu.4. Press the ENTER button.5. Press the / buttons to select Disc Menu.

5. Disc Menu

The Parental Control settings limit the player to only play content at or below a certainmovie rating. The ratings systems in different countries vary. In the USA, the Motion

Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc.In this menu item, you can set what is the highest level of rating you wish to allow theunit to play.

1. Press the SETUP button when stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Parental.4. Press the ENTER button.5. Press the / buttons to select desired

parental level.

6. Parental

If you select RESET when in the DEFAULT settingsmode, all the settings of the Setup Menu will bereturned to the factory defaut settings, except forParental Level, Region and Password values.

1. Press the SETUP button when stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Default.4. Press the ENTER button to select Reset.

7. Default

22

PBCAudioSubtitleOnENG

Preferred Menu Languagereferred MenuLanguage

Preference Pagereference PageFrenchSpanish

TV TypeV Type Ntsc English

ParentalDefaultJapaneseKoreanChinese

ThaiRussianDisc Menui scMenu ENG


Load Factory Settingoad FactorySetting

Preference Pagereference PageTV TypeV Type Ntsc

Disc Menui scMenu ENGParentalResetefault


Set Parental Controlet Parental Control

Preference Pagereference PageTV TypeV Type Ntsc 1 KID SAF

2 G3 P G4 PG 135 PGR

6 R7 NC178 ADULT

1 K ID SAF2 G3 PG4 P G 1 35 PGR6 R7 NC178 ADULTParentalDefaultDisc Menui scMenu ENG

Gamma

Hue

Select screen hue level using the direction / buttons and press the ENTER button.

BrightnessContrast 0000

Gamma

Vid eo Q ual ity Set upideo QualitySetup

MediumLow

Color MID

HueSaturationLuma DelayumaDelay

00001 TT None

Gamma None High

BrightnessContrast 0000

Hue

Vid eo Qua lit y S etu pideo QualitySetupColor MID

SaturationLuma DelayumaDelay 001 TT

Gamma NoneHue 00

Hue

Hue 0

In some systems, you might experience a loss in the strength of the dark sections ofthe displayed picture. This can be helped by changing the Gamma setting, whichboosts the dark level but leaves the other levels unchanged.


20/20

md-1210cmx manual

Documents