mdt 268 - maxim crane works...md t 268 2 features new counter-jib design is able to be folded for...
TRANSCRIPT
MDT 268
contentsFeatures 2Specifications 3Component Weights 5MDT 268 J10
Dimensions 6Load Charts 7Mast & Mechanisms 8
MDT 268 J12
Dimensions 9Load Charts 10Mast & Mechanisms 11
MDT 268 J10 (Metric)
Dimensions 12Load Charts 13Mast & Mechanisms 14
MDT 268 J12 (Metric)
Dimensions 15Load Charts 16Mast & Mechanisms 17
Symbols Glossary 18
features
• Topless jib with maximumradius of 213 ft (65 m)
• Two versions: 11 USt (10 t)and 13.2 USt (12 t)
• 6,614 lb (3 000 kg) maximumtip capacity at 213 ft (65 m)
• Internal and externalclimbing with K mast
• Centrally locatedmechanisms
www.manitowoc.com*Product may be shown with optional equipment.
productguide
MD
T2
68
2
features
New counter-jib design is able to be foldedfor transport and erected as one piece.
K mast availableas monoblockor panel mastwith steppedpins for easyinstallation andinstant visualinspection.Climbing mastavailable toallow you toclimb with yourjobsite.
Designed for easy maintenance, theMDT 268’s mechanisms are centrallylocated near the pivot.
Patented sixknot jibdesigncreates alighter jib withenhancedcapacities forimprovedperformance.
MD
T2
68
3
specifications
Jib 98 ft (30 m) radius standard lattice jib. Patented six (6) bar knotdesign and joints. Catwalks in first two (2) 33 ft (10 m) sectionsfor maintenance and easy access to sling points for erection anddismantling. Mounted as whole wired jib with hoist rope andtrolley rope installed. One pin and two (2) safety pins atconnection point to counter-jib. Sling points welded on jib, *liftingbeam and *slings optional with crane.
*Jib Extensions Optional jib lengths start at 82 ft (25 m). Additional jib sections of16 ft (5 m) available up to maximum jib length of 205 ft (65 m).
Counter-Jib Patented design in one compact package. Inclined position ofballast holder ensures self-locking of ballast blocks. Weldedsling points.
Counter-Jib Ballast (customer supplied)
Two (2) concrete block style combinations for various ballastingcombinations according to jib length: 3,373 lb (1 530 kg) and10,141 lb (4 600 kg); 6,768 lb (3 070 kg) and 10,141 lb (4 600 kg).Blocks are designed for safe and easy placement on the groundduring erection and dismantling.
Cab Vision cab 140C includes heating, window vent, tinted glass,windshield wipers, sun visor, document case, side pocket, bottleholder, ergonomic seat with high back, adjustable armrests,height and seating with control units, front-to-back shifting andreclining back.
140C: 4.6 ft (1,400 mm) width, 7.2 ft (2,200 mm) height, and 5.3 ft (1 620 mm) depth.
*140S: 4.6 ft (1 400 mm) width, 7.2 ft (2 200 mm) height, and 7.2 ft (2 180 mm) depth; air conditioning optional.
Controls Dual axis joystick controls located in the cab with an optional*radio remote control optional.
ReevingSM for 2-part line application standard. *Optional 2-trolley orSM/DM (semi-automatic) hookblock for 2 or 4-part lineapplications.
Electrical Requirement480 volt, 60 Hz measured at the turntable.
* Anemometer & *Dialog VisuElectronic wind speed meter (anemometer) to alert the operatorof wind speed conditions. Requires *Dialog Visu to displayinformation. Crane can be operated with wind gusts up to 45MPH (72 KPH). *Dialog Visu displays height under hook,position of jib trolley, loads and overload moment, and windspeed.
* Denotes optional equipment
SwingRVF 162 Optima + slewing mechanism with maximum swingspeed of 0.8 RPM. Progressive control of speed with counter-slewing possible, anti-load swinging system makes aligning theload and jib easier. Optima + swing allows two (2) distinct swingmodes.
Hoist Grooved drum with electromagnetic safety brake. Progressivespeed change according to the accelerating or deceleratingramps. Optima allows the hoist to adapt its speed to the weightof the load.
MDT 268 J10: 50 LVF 25 Optima *75 LVF 25 Optima
Single Line Pull: 2.8 USt (2.5 t) 2.8 USt (2.5 t) Line speed: 315 ft/min (96 m/min) 361 ft/min (110 m/min) Horse Power: 50 HP 75 HP Spooling
Capacity: 1,827 ft (557 m) 2,936 ft (895 m)
MDT 268 J12: 50 LVF 30 Optima *75 LVF 30 Optima *100 LVF 30 Optima
Single Line Pull: 3.3 USt (3 t) 3.3 USt (3 t) 3.3 USt (3 t) Linespeed: 269 ft/min (82 m/min) 381 ft/min (116 m/min) 531 ft/min (162 m/min) Horse Power: 50 HP 75 HP 75 HP Spooling
Capacity: 1,106 ft (337 m) 2,513 ft (766 m) 3,087 ft (941 m)
Specification of quantity of hoist rope is dependent uponcustomer’s requirements and mast height.
Trolley6 DVF 4: 5.5 HP variable frequency hoist with 882 lb (400 kg)line pull and line speed of 394 ft/min (120 m/min). Progressivespeed change according to acceleration or deceleration rampscontrolled by the frequency converter.
* Optional Equipment * STANDARD NORTH AMERICAN SPECIFICATION for J12:
includes electric slip ring, 197 ft (60 m) cable 4G35 mm2,213 ft (65 m) jib, 100LVF30 Optima hoist, heating mechanismfor hoist, 2-trolley hookblock or SM/DM hookblock. 853 ft(260 m) hoist rope, Vision 140SX cab with insulation, DialogVisu, and anemometer.
* Electric slip ring * Jib radius 82 – 205 ft (25 – 65 m) * 2-Trolley hookblock * SM/DM (semi-automatic) hookblock * Dialog Visu * Cab air conditioning * Motorized greasing
Consult price list for additional options
Jib
JibExtension
CounterJib
NOTE: The information above is useful as a basic introduction to the crane. In no case may this serve as a substitute for the serialnumbered manuals. Dimensions have been rounded to the nearest tenth.
Ballast
Cab
Controls
Reeving2-Part
Swing
Hoist
Luffer
ElectricalRequirement
Anemometer
* Anchor Stools Anchor stools to be used in combination with a concretefoundation. Anchors P61A: permanent anchor, maximum free-standing HUH: 212 ft (64.7 m) on 6.6 ft (2 m) K mast.
Anchors P62A: permanent anchor, maximum free-standingHUH: 229 ft (69.7 m) on 6.6 ft (2 m) K mast.
* Chassis Chassis available with square footprints of 19.7 ft (6 m) for K600mast. Composed of 2 metallic structures connected with acentral mast-chassis and 4 struts for rigidity. A chassis can beplaced on either straight or curved traveling equipment ormetallic stools embedded into a concrete block.
Chassis V60A: square footprint of 19.7 ft (6 m), maximum free-standing HUH: 217.8 ft (66.4 m) on 6.6 ft (2 m) K mast.
Chassis V63A: square footprint of 19.7 ft (6 m), maximum free-standing HUH: 245.7 ft (74.9 m) on 6.6 ft (2 m) K mast.
* Cross Shaped BaseCross shaped bases available with square footprint of 14.8 ft(4.5 m) and 19.7 ft (6 m). Composed of 2 beams and able to beplaced on screw jacks with support plates, screwjacks withconcrete blocks or traveling equipment.
Cross ZD 463: square footprint of 14.8 ft (4.5 m), maximum free-standing HUH 172.2 ft (52.5 m) on 6.6 ft (2 m) K mast.
Cross ZX6830: square footprint of 19.7 ft (6 m), maximum free-standing HUH: 210.6 ft (64.2 m) on 6.6 ft (2 m) K mast.
* Consult price list for additional options
MD
T2
68
specifications
4
* Mast K mast in K600 (6.6 ft [2 m]), panel or monoblock, and climbingor non-climbing available. Lengths of 10.9 ft (3.33 m), 16.4 ft (5 m), and 32.8 ft (10 m). available. Identification plates weldedon each section to designate the type of mast and pin box tostow pins when not in use.
Mast nomenclature: K – Series of mast with box angled membersM – Monoblock, non climbing R – Reinforced MT – Monoblock & climbingRMT – Reinforced, monoblock, climbing
Equipped with aluminum ladders and galvanized steel restingplatforms in each section. Cast connections are secured withtwo double tapered pins.
*Tirax tool and *Tirax pins available for faster easier assembly.
Combinations of masts can allow free-standing HUH to increase.
* Climbing EquipmentEquipment available for both internal climbing and externalclimbing of 6.6 ft (2 m) mast. Internal climbing equipment soldseparately: 20 HP hydraulic unit, jack, and collars. Externalclimbing equipment sold separately: climbing cage, 20 HPhydraulic unit, yoke, and jack.
Mast
ClimbingEquipment
AnchorStools
Chassis
Cross-ShapedBase
NOTE: The information above is useful as a basic introduction to the crane. In no case may this serve as a substitute for the serialnumbered manuals. Dimensions have been rounded to the nearest tenth.
MD
T2
68
5
component weights
NOTE: The information above is useful as a basic introduction to the crane. In no case may this serve as a substitute for the serialnumbered manuals. Dimensions have been rounded to the nearest tenth.
(continued)
MD
T2
68
6
dimensions
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
213 ft
M D T
197 ft
180 ft
164 ft
148 ft
131 ft
115 ft
98 ft
82 ft
6.6 x 6.6 ft
11 USt3.3 USt
3.9 USt
4.5 USt
5 USt
5.5 USt
6.1 USt
7.1 USt
8.5 USt
10.5 USt
M D T
50 ft
59 ft13 ft
10 ft
8 ft10 ft 218 ft
H (ft)172227246
19.7 ft14.8 ft19.7 ft
MDT 268 J10
MD
T2
68
7
NOTE: Illustrated hook heights on this page were determined using FEM 1.001. Configurations shown may include optionalequipment. Other codes may require reductions in configurations.
MDT 268 J10
5.5
11
(ft)
- 0.5 USt
= - 0.5 USt
(USt)
5.5
11
(ft)
(USt)
- 0.1 USt
= - 0.1 USt
3,1213 ft 10 72 72 82 89 98 105 115 121 129 138 148 154 164 171 18011 10.9 9.5 8.6 7.6 7.1 6.4 6 5.5 5.5 5.1 4.9 4.5 4.3 4.1
187 197 203 213 ft3.9 3.6 3.5 3.3 USt
3,1197 ft 10 76 82 89 98 105 115 121 131 136 147 148 154 164 17111 10.1 9.3 8.2 7.6 6.8 6.4 5.8 5.5 5.5 5.5 5.2 4.9 4.6
180 187 197 ft4.3 4.2 3.9 USt
3,1180 ft 10 78 82 89 98 105 115 121 131 138 142 152 154 164 17111 10.5 9.6 8.5 7.8 7.1 6.6 6.1 5.7 5.5 5.5 5.4 5.1 4.9
180 ft4.5 USt
3,1164 ft 10 78 82 89 98 105 115 121 131 141 151 154 164 ft11 10.4 9.6 8.5 7.8 7.1 6.6 6.1 5.5 5.5 5.4 5 USt
3,1148 ft 10 78 82 89 98 105 115 121 131 141 148 ft11 10.5 9.6 8.5 7.8 7.1 6.6 6.1 5.5 5.5 USt
3,1131 ft 10 79 82 89 98 105 115 121 131 ft11 10.5 9.6 8.5 7.9 7.2 6.6 6.1 USt
3,1115 ft 10 79 82 89 98 105 115 ft11 10.5 9.6 8.5 7.9 7.1 USt
3,198 ft 10 79 82 89 98 ft11 10.6 9.7 8.5 USt
3,182 ft 10 79 82 ft11 10.5 USt
3,1213 8 73 82 89 98 105 115 121 131 132 135 138 148 154 164 17111 9.7 8.9 7.8 7.3 6.5 6.2 5.5 5.5 5.5 5.4 5 4.6 4.3 4.1
180 187 197 203 213 ft3.9 3.6 3.4 3.3 3.1 USt
3,1197 ft 8 77 82 89 98 105 115 121 131 138 138 141 148 154 164 17111 10.6 9.4 8.3 7.7 6.9 6.5 5.87 5.5 5.5 5.5 5.2 5 4.6 4.4
180 187 197 ft4.1 3.9 3.6 USt
3,1180 ft 8 79 82 89 98 105 115 121 131 138 144 147 148 154 164 17111 10.6 9.7 8.6 8 7.3 6.7 6.2 5.8 5.5 5.5 5.5 5.2 4.9 4.6
3,1164 ft 8 79 82 89 98 105 115 121 131 143 146 148 154 164 ft11 10.6 9.7 8.6 7.9 7.2 6.7 6.2 5.5 5.5 5.4 5.2 4.8 USt
3,1148 ft 8 79 82 89 98 105 115 121 131 144 146 148 ft11 10.6 9.7 8.6 7.9 7.2 6.7 6.2 5.5 5.5 5.5 USt
3,1131 ft 8 79 82 89 98 105 115 121 131 ft11 10.6 9.7 8.6 7.9 7.2 6.7 6.2 USt
3,1115 ft 8 79 82 89 98 105 115 ft11 10.6 9.7 8.6 8 7.2 USt
3,198 ft 8 80 82 89 98 ft11 10.7 9.8 8.7 USt
3,182 ft 8 80 82 ft11 10.7 USt
180 ft4.3 USt
load charts
MD
T2
68
8
mast & mechanisms
10.9
ft
P 61 A
32.8
ft16
.4ft
V 60 A
17.7
ft
19.7 ft
H (ft)217.8201.4185.0168.6152.2135.8119.4103.086.670.253.8
H (ft)212.3201.1184.7168.3151.9135.5119.1102.786.369.953.5
32.8
ft16
.4ft
121110987654321
13121110987654321
V 63 A
34.8
ft
19.7 ft
H (ft)245.7234.6218.2201.8185.4169.0152.6136.2119.8103.386.970.554.1
32.8
ft16
.4ft
13121110987654321
10.9
ftP 62 A
32.8
ft16
.4ft
H (ft)228.7217.5201.1184.7168.3151.9135.5119.1102.786.369.953.5
1413121110987654321
HH
-2.3
ft=
HH
=
H (ft)171.9155.5139.1122.7106.389.973.557.140.7
32.8
ft16
.4ft
10987654321
ZD 463
5.4
t
H (ft)201.1190.3173.9157.5141.1124.7108.391.9
32.8
ft16
.4ft
1211109876543214.
9ft
14.8 ft
H (ft)227.0215.9205.1188.6172.2155.8139.4123.0106.690.273.857.441.0
32.8
ft16
.4ft
ZX 6830
4.9
ft
19.7 ft
B 60 A
HH
-2.3
ft=
HH
=
10.9
ft
10.9
ft1413121110987654321
10.9
ft
10.9
ft
P 61 A
32.8
ft16
.4ft
V 60 A
17.7
ft
19.7 ft
H (ft)217.8201.4185.0168.6152.2135.8119.4103.086.670.253.8
H (ft)212.3201.1184.7168.3151.9135.5119.1102.786.369.953.5
32.8
ft16
.4ft
121110987654321
13121110987654321
V 63 A
34.8
ft
19.7 ft
H (ft)245.7234.6218.2201.8185.4169.0152.6136.2119.8103.386.970.554.1
32.8
ft16
.4ft
13121110987654321
10.9
ft
P 62 A
32.8
ft16
.4ft
H (ft)228.7217.5201.1184.7168.3151.9135.5119.1102.786.369.953.5
1413121110987654321
HH
-2.3
ft=
HH
=
H (ft)171.9155.5139.1122.7106.389.973.557.140.7
32.8
ft16
.4ft
10987654321
ZD 463
5.4
t
H (ft)201.1190.3173.9157.5141.1124.7108.391.9
32.8
ft16
.4ft
1211109876543214.
9ft
14.8 ft
H (ft)227.0215.9205.1188.6172.2155.8139.4123.0106.690.273.857.441.0
32.8
ft16
.4ft
ZX 6830
4.9
ft
19.7 ft
B 60 A
HH
-2.3
ft=
HH
=
10.9
ft
10.9
ft
1413121110987654321
10.9
ft
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
MDT 268 J10
hp kW
ft/minUSt
Þ105.5
Þ395.5
Þ1185.5
Þ1514.1
Þ Þ Þ Þ Þ Þ2172.8
3151.4
511
2011
5911
758.3
1085.5
1572.8 50 37 1,827 ft
ft/minUSt
Þ135.5
Þ465.5
Þ1715.5
Þ2174.1
Þ Þ Þ Þ Þ Þ2952.8
3611.4
711
2311
8511
1088.3
1485.5
1802.8 75 55 2,936 ft
ft/min 0 Þ 164 (11 USt) - 0 Þ 328 (5.5 USt) - 0 Þ 394 (2.8 USt) 5,5 46 DVF 4
4 x 7 4 x 5,244 - 89V 60 A
ft/min
2 x 7,5 2 x 5,5RVF 162Optima + 0 Þ 0,8rpm
RT 544A1 - 2VR 13 m
50 LVF : 75 kVA75 LVF : 100 kVA
CEI 38 IEC 38 kVA
480 V (+6% -10%)
50 LVF 25Optima
75 LVF 25Optima
4 x 5 4 x 3,749 - 98ft/minRT 443A1 - 2V
6 x 7 6 x 5,244 - 89ft/minRT 544A1 - 2V
V 63 A
ZD 463
ZX 6830
118217
315ft/min
1.4 2.8 5.5 USt
+ 25%
50 LVF 25 Optima
171
295361
ft/min
1.4 2.8 5.5 USt
+ 25%75 LVF 25 Optima
MD
T2
68
9
dimensions
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
MDT 268 J12
213 ft
M D T
197 ft
180 ft
164 ft
148 ft
131 ft
115 ft
98 ft
82 ft
6.6 x 6.6 ft
13.2 USt3.2 USt
3.9 USt
4.4 USt
5 USt
5.5 USt
6.1 USt
7.1 USt
8.5 USt
10.5 USt
M D T
50 ft
59 ft13 ft
10 ft
8 ft10 ft 218 ft
H (ft)172227246
19.7 ft14.8 ft19.7 ft
MD
T2
68
10
load charts
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
MDT 268 J12
6.6
13.2
(ft)
- 0.6 USt
= - 0.6 USt
(USt)
6.6
13.2
(ft)
(USt)
- 0.2 USt
= - 0.2 USt
ms 3,1213 ft 10 60 66 72 82 89 98 105 108 116 121 131 138 148 154 16413.2 12 10.8 9.3 8.5 7.4 6.8 6.6 6.6 6.3 5.7 5.4 5.1 4.7 4.4
171 180 187 197 203 213 ft4.2 4 3.7 3.5 3.4 3.2 USt
3,1197 ft 10 64 66 72 82 89 98 105 115 116 124 131 138 148 154 16413.2 12.9 11.6 10 9.1 8 7.5 6.7 6.6 6.6 6.2 5.8 5.4 5.2 4.9
171 180 187 197 ft4.6 4.3 4.1 3.9 USt
3,1180 ft 10 66 72 82 89 98 105 115 118 127 131 138 148 154 16413.2 11.9 10.3 9.4 8.3 7.7 6.8 6.6 6.6 6.4 6.1 5.6 5.3 5
171 180 ft4.7 4.4 USt
3,1164 ft 10 66 72 82 89 98 105 112 118 127 131 138 148 154 164 ft13.2 11.8 10.3 9.4 8.3 7.6 7.1 6.6 6.6 6.4 6 5.5 5.3 4.9 USt
3,1148 ft 10
3,1131 ft 10
3,1115 ft 10 66 72 82 89 98 105 115 ft13.2 11.9 10.3 9.4 8.3 7.7 6.9 USt
3,198 ft 10 66 72 82 89 98 ft13.2 12 10.4 9.5 8.3 USt
3,182 ft 10 66 72 82 ft13.2 12 10.3 USt
3,1213 8 61 66 72 82 89 98 105 110 112 115 121 131 138 148 15413.2 12.1 10.9 9.4 8.6 7.5 6.9 6.6 6.6 6.4 6 5.4 5.1 4.7 4.4
164 171 180 187 197 203 213 ft4.1 3.9 3.6 3.4 3.2 3.1 2.9 USt
3,1197 ft 8 65 66 72 82 89 98 105 115 117 119 121 131 138 148 15413.2 13 11.7 10 9.1 8.2 7.5 6.7 6.6 6.6 6.5 5.8 5.5 5.1 4.9
164 171 180 187 197 ft4.5 4.3 4 3.7 3.5 USt
3,1180 ft 8
3,1164 ft 8 66 72 82 89 98 105 115 119 121 131 138 148 154 164 ft13.2 11.9 10.3 9.4 8.3 7.7 6.9 6.6 6.6 6.1 5.7 5.2 5 4.6 USt
3,1148 ft 8 66 72 82 89 98 105 115 119 122 131 138 148 ft13.2 11.9 10.4 9.5 8.4 7.7 6.9 6.6 6.6 6.1 5.7 5.2 USt
3,1131 ft 8
3,1115 ft 8 66 72 82 89 98 105 115 ft13.2 12 10.4 9.5 8.4 7.7 6.9 USt
3,198 ft 8 66 72 82 89 98 ft13.2 12 10.4 9.5 8.4 USt
3,182 ft 8 66 72 82 ft13.2 12 10.4 USt
164 171 180 ft4.6 4.4 4.1 USt
66 72 82 89 98 105 115 118 127 131 138 148 ft13.2 11.9 10.3 9.4 8.3 7.6 6.8 6.6 6.6 6.4 6.1 5.6 USt66 72 82 89 98 105 115 118 127 131 ft
13.2 11.9 10.3 9.4 8.3 7.6 6.8 6.6 6.6 6.4 USt
66 72 82 89 98 105 115 119 122 131 138 148 15413.2 12 10.4 9.5 8.4 7.7 6.9 6.6 6.6 6.1 5.7 5.3 5
66 72 82 89 98 105 115 119 122 131 ft13.2 12 10.4 9.5 8.4 7.7 6.9 6.6 6.6 6.1 USt
MD
T2
68
11
mast & mechanisms
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
MDT 268 J1210
.9ft
P 61 A
32.8
ft16
.4ft
V 60 A
17.7
ft
19.7 ft
H (ft)217.8201.4185.0168.6152.2135.8119.4103.086.670.253.8
H (ft)212.3201.1184.7168.3151.9135.5119.1102.786.369.953.5
32.8
ft16
.4ft
121110987654321
13121110987654321
V 63 A
34.8
ft
19.7 ft
H (ft)245.7234.6218.2201.8185.4169.0152.6136.2119.8103.386.970.554.1
32.8
ft16
.4ft
13121110987654321
10.9
ft
P 62 A
32.8
ft16
.4ft
H (ft)228.7217.5201.1184.7168.3151.9135.5119.1102.786.369.953.5
1413121110987654321
HH
-2.3
ft=
HH
=
H (ft)171.9155.5139.1122.7106.389.973.557.140.7
32.8
ft16
.4ft
10987654321
ZD 463
5.4
t
H (ft)201.1190.3173.9157.5141.1124.7108.391.9
32.8
ft16
.4ft
1211109876543214.
9ft
14.8 ft
H (ft)227.0215.9205.1188.6172.2155.8139.4123.0106.690.273.857.441.0
32.8
ft16
.4ft
ZX 6830
4.9
ft
19.7 ft
B 60 A
HH
-2.3
ft=
HH
=
10.9
ft
10.9
ft
1413121110987654321
10.9
ft
10.9
ft
P 61 A
32.8
ft16
.4ft
V 60 A
17.7
ft
19.7 ft
H (ft)217.8201.4185.0168.6152.2135.8119.4103.086.670.253.8
H (ft)212.3201.1184.7168.3151.9135.5119.1102.786.369.953.5
32.8
ft16
.4ft
121110987654321
13121110987654321
V 63 A
34.8
ft
19.7 ft
H (ft)245.7234.6218.2201.8185.4169.0152.6136.2119.8103.386.970.554.1
32.8
ft16
.4ft
13121110987654321
10.9
ftP 62 A
32.8
ft16
.4ft
H (ft)228.7217.5201.1184.7168.3151.9135.5119.1102.786.369.953.5
1413121110987654321
HH
-2.3
ft=
HH
=
H (ft)171.9155.5139.1122.7106.389.973.557.140.7
32.8
ft16
.4ft
10987654321
ZD 463
5.4
t
H (ft)201.1190.3173.9157.5141.1124.7108.391.9
32.8
ft16
.4ft
1211109876543214.
9ft
14.8 ft
H (ft)227.0215.9205.1188.6172.2155.8139.4123.0106.690.273.857.441.0
32.8
ft16
.4ft
ZX 6830
4.9
ft
19.7 ft
B 60 A
HH
-2.3
ft=
HH
=
10.9
ft
10.9
ft1413121110987654321
10.9
ft
hp kW
ft/minUSt
Þ96.6
Þ336.6
Þ986.6
Þ1315
Þ Þ Þ Þ Þ Þ1843.3
2691.7
413.2
1613.2
4913.2
669.9
926.6
1353.3 50 37 1,106 ft
ft/minUSt
12 Þ
6.6Þ144 Þ184
5Þ Þ Þ Þ262
3.33811.7
6 Þ
13.272 92
9.91316.6
1903.3 75 55 2,513 ft
ft/min 0 Þ 164 (13.2 USt) - 0 Þ 328 (6.6 USt) - 0 Þ 394 (3.3 USt) 5,5 46 DVF 4
4 x 7 4 x 5,244 - 89V 60 A
ft/min
2 x 7,5 2 x 5,5RVF 162Optima + 0 Þ 0,8rpm
RT 544A1 - 2VR 13 m
50 LVF : 75 kVA - 75 LVF : 100 kVA - 100 LVF : 125 kVA
CEI 38 IEC 38 kVA
480 V (+6% -10%)
50 LVF 30Optima
75 LVF 30Optima
ft/minUSt
0 Þ
6.6Þ197 Þ262
5Þ Þ Þ Þ361
3.35311.7
0 Þ
13.298 131
9.91806.6
2663.3 100 75 3,087 ft
100 LVF 30Optima
4 x 5 4 x 3,749 - 98ZD 463
ft/minRT 443A1 - 2V
6 x 7 6 x 5,244 - 89ZX 6830
ft/minRT 544A1 - 2V
V 63 A
98184269
ft/min
1.7 3.3 6.6 USt
+ 25%
50 LVF 30 Optima
144
262
381
ft/min
1.7 3.3 6.6 USt
+ 25%
75 LVF 30 Optima
197
361
531ft/min
1.7 3.3 6.6 USt
+ 25%
100 LVF 30 Optima
MD
T2
68
12
metric dimensions
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
65 m
M D T
60 m
55 m
50 m
45 m
40 m
35 m
30 m
25 m
2 x 2 m
10 t3 t
3,55 t
4,1 t
4,55 t
5 t
5,5 t
6,45 t
7,75 t
9,56 t
M D T
15,2 m
17,9 m
4 m 2,9 m
2,35 m2,95 m 66,5 m
H (m)52,469,274,9
6 m4,5 m6 m
MDT 268 J10
MD
T2
68
13
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
metric load charts
5.5
11
(ft)
- 0.5 USt
= - 0.5 USt
(USt)
5.5
11
(ft)
(USt)
- 0.1 USt
= - 0.1 USt
3,165 m 3,1 21,9 22 25 27 30 32 35 37 39,3 42,2 45 47 50 52 5510 9,9 8,6 7,8 6,9 6,4 5,8 5,4 5 5 4,6 4,4 4,1 3,9 3,7
57 60 62 65 m3,5 3,3 3,2 3 t
3,160 m 3,1 23,2 25 27 30 32 35 37 40 41,6 44,8 45 47 50 5210 9,2 8,4 7,4 6,9 6,2 5,8 5,3 5 5 5 4,7 4,4 4,2
55 57 60 m3,9 3,8 3,55 t
3,155 m 3,1 23,9 25 27 30 32 35 37 40 42 43,2 46,3 47 50 5210 9,5 8,7 7,7 7,1 6,4 6 5,5 5,2 5 5 4,9 4,6 4,4
55 m4,1 t
3,150 m 3,1 23,8 25 27 30 32 35 37 40 42,9 46 47 50 m10 9,4 8,7 7,7 7,1 6,4 6 5,5 5 5 4,9 4,55 t
3,145 m 3,1 23,9 25 27 30 32 35 37 40 43 45 m10 9,5 8,7 7,7 7,1 6,4 6 5,5 5 5 t
3,140 m 3,1 24 25 27 30 32 35 37 40 m10 9,5 8,7 7,7 7,2 6,5 6 5,5 t
3,135 m 3,1 24 25 27 30 32 35 m10 9,5 8,7 7,7 7,2 6,45 t
3,130 m 3,1 24 25 27 30 m10 9,6 8,8 7,75 t
3,125 m 3,1 24 25 m10 9,56 t
3,165 m 2,4 22,4 25 27 30 32 35 37 40 40,3 41,1 42 45 47 50 5210 8,8 8,1 7,1 6,6 5,9 5,6 5 5 5 4,9 4,5 4,2 3,9 3,7
55 57 60 62 65 m3,5 3,3 3,1 3 2,8 t
3,160 m 2,4 23,4 25 27 30 32 35 37 40 42 42,2 42,9 45 47 50 5210 9,3 8,5 7,5 7,0 6,3 5,9 5,3 5 5 5 4,7 4,5 4,2 4
55 57 60 m3,7 3,5 3,3 t
3,155 m 2,4 79 82 89 98 105 115 121 131 138 144 147 148 154 164 17111 10.6 9.7 8.6 8 7.3 6.7 6.2 5.8 5.5 5.5 5.5 5.2 4.9 4.6
3,150 m 2,4 79 82 89 98 105 115 121 131 143 146 148 154 164 ft11 10.6 9.7 8.6 7.9 7.2 6.7 6.2 5.5 5.5 5.4 5.2 4.8 USt
3,145 m 2,4 79 82 89 98 105 115 121 131 144 146 148 ft11 10.6 9.7 8.6 7.9 7.2 6.7 6.2 5.5 5.5 5.5 USt
3,130 m 2,4 79 82 89 98 105 115 121 131 ft11 10.6 9.7 8.6 7.9 7.2 6.7 6.2 USt
3,125 m 2,4 79 82 89 98 105 115 ft11 10.6 9.7 8.6 8 7.2 USt
3,130 m 2,4 80 82 89 98 ft11 10.7 9.8 8.7 USt
3,125 m 2,4 80 82 ft11 10.7 USt
180 ft4.3 USt
MDT 268 J10
MD
T2
68
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
mast & mechanisms
14
3,33
m
P 61 A
10m
5m
V 60 A
5,4
m
6 m
H (m)66,461,456,451,446,441,436,431,426,421,416,4
H (m)64,761,356,351,346,341,336,331,326,321,316,3
10m
5m
121110987654321
13121110987654321
V 63 A
10,6
m
6 m
H (m)74,971,566,561,556,551,546,541,536,531,526,521,516,5
10m
5m
13121110987654321
3,33
mP 62 A
10m
5m
H (m)69,766,361,356,351,346,341,336,331,326,321,316,3
1413121110987654321
HH
-0,7
m=
HH
=
H (m)52,447,442,437,432,427,422,417,412,4
10m
5m
10987654321
ZD 463
1,66
m
H (m)61,358534843383328
10m
5m
121110987654321
1,5
m
4,5 m
H (m)69,265,862,557,552,547,542,537,532,527,522,517,512,5
10m
5m
1413121110987654321
ZX 6830
1,5
m
6 m
B 60 A
HH
-0,7
m=
HH
=
3,33
m
3,33
m
3,33
m
P 61 A
10m
5m
V 60 A
5,4
m
6 m
H (m)66,461,456,451,446,441,436,431,426,421,416,4
H (m)64,761,356,351,346,341,336,331,326,321,316,3
10m
5m
121110987654321
13121110987654321
V 63 A
10,6
m
6 m
H (m)74,971,566,561,556,551,546,541,536,531,526,521,516,5
10m
5m
13121110987654321
3,33
m
P 62 A
10m
5m
H (m)69,766,361,356,351,346,341,336,331,326,321,316,3
1413121110987654321
HH
-0,7
m=
HH
=
H (m)52,447,442,437,432,427,422,417,412,4
10m
5m
10987654321
ZD 463
1,66
m
H (m)61,358534843383328
10m
5m
121110987654321
1,5
m
4,5 m
H (m)69,265,862,557,552,547,542,537,532,527,522,517,512,5
10m
5m
1413121110987654321
ZX 6830
1,5
m
6 m
B 60 A
HH
-0,7
m=
HH
=
3,33
m
3,33
m
ch - PShp kW
m/mint
Þ3,25
Þ125
Þ365
Þ463,75
Þ Þ Þ Þ Þ Þ662,5
961,25
1,610
610
1810
237,5
335
482,5 50 37 557 m
m/mint
Þ45
Þ145
Þ525
Þ663,75
Þ Þ Þ Þ Þ Þ902,5
1101,25
210
710
2610
337,5
455
552,5 75 55 895 m
m/min 0 Þ50 (10 t) - 0 Þ 100 (5 t) - 0 Þ 120 (2,5 t) 5,5 46 DVF 4
4 x 7 4 x 5,213,5 - 27V 60 A
m/min
2 x 7,5 2 x 5,5RVF 162Optima + 0 Þ 0,8tr/min
U/min - rpm
RT 544A1 - 2VR 13 m
50 LVF : 75 kVA75 LVF : 100 kVA
CEI 38 IEC 38 kVA
400 V (+6% -10%)
50 LVF 25Optima
75 LVF 25Optima
4 x 5 4 x 3,715 - 30m/minRT 443A1 - 2V
6 x 7 6 x 5,213,5 - 27m/minRT 544A1 - 2V
V 63 A
ZD 463
ZX 6830
3666
96m/min
1,25 2,5 5 t
+ 25%
50 LVF 25 Optima
52
90110
m/min
1,25 2,5 5 t
+ 25%75 LVF 25 Optima
MDT 268 J10
MD
T2
68
metric dimensions
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
15
MDT 268 J12
65 m
M D T
60 m
55 m
50 m
45 m
40 m
35 m
30 m
25 m
2 x 2 m
12 t2,9 t
3,5 t
4 t
4,45 t
5,05 t
5,8 t
6,25 t
7,55 t
9,36 t
M D T
15,2 m
17,9 m
4 m 2,9 m
2,35 m2,95 m 66,5 m
H (m)52,469,274,9
6 m4,5 m6 m
MD
T2
68
16
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
metric load charts
6
12
(m )
- 0,55 t
= - 0,55 t
(t)
6
12
(m)
(t)
- 0,15 t
= - 0,15 t
3,165 m 3,1 18,4 20 22 25 27 30 32 33 35,5 37 40 42 45 47 5012 10,9 9,8 8,4 7,7 6,7 6,2 6 6 5,7 5,2 4,9 4,6 4,3 4
52 55 57 60 62 65 m3,8 3,6 3,4 3,2 3,1 2,9 t
3,160 m 3,1 19,6 20 22 25 27 30 32 35 35,3 37,9 40 42 45 47 5012 11,7 10,5 9,1 8,3 7,3 6,8 6,1 6 6 5,6 5,3 4,9 4,7 4,4
52 55 57 60 m4,2 3,9 3,7 3,5 t
3,155 m 3,1 20,1 22 25 27 30 32 35 36,1 38,8 40 42 45 47 50 5212 10,8 9,3 8,5 7,5 7 6,2 6 6 5,8 5,5 5,1 4,8 4,5
55 m4,3 4 t
3,150 m 3,1 20 22 25 27 30 32 34 35,9 38,6 40 42 45 47 50 m12 10,7 9,3 8,5 7,5 6,9 6,4 6 6 5,8 5,4 5 4,8 4,45 t
3,145 m 3,1
3,140 m 3,1
3,135 m 3,1 20,1 22 25 27 30 32 35 m12 10,8 9,3 8,5 7,5 7 6,25 t
3,130 m 3,1 20,2 22 25 27 30 m12 10,9 9,4 8,6 7,55 t
3,125 m 3,1 20,2 22 25 m12 10,9 9,36 t
3,165 m 2,4 18,6 20 22 25 27 30 32 33,4 34,1 35 37 40 42 45 4712 11 9,9 8,5 7,8 6,8 6,3 6 6 5,8 5,4 4,9 4,6 4,3 4
50 52 55 57 60 62 65 m4.1 3.9 3.6 3.4 3.2 3.1 2.9 USt
3,160 m 2,4 19,7 20 22 25 27 30 32 35 35,6 36,3 37 40 42 45 4712 11,8 10,6 9,1 8,3 7,4 6,8 6,1 6 6 5,9 5,3 5 4,6 4,4
50 52 55 57 60 m4,1 3,9 3,6 3,4 3,2 t
3,155 m 2,4
3,150 m 2,4 20,1 22 25 27 30 32 35 36,2 37 40 42 45 47 50 m12 10,8 9,3 8,5 7,5 7 6,3 6 6 5,5 5,2 4,7 4,5 4,15 t
3,145 m 2,4 20,1 22 25 27 30 32 35 36,3 37,1 40 42 45 m12 10,8 9,4 8,6 7,6 7 6,3 6 6 5,5 5,2 4,75 t
3,140 m 2,4
3,135 m 2,4 20,2 22 25 27 30 32 35 m12 10,9 9,4 8,6 7,6 7 6,3 t
3,130 m 2,4 20,2 22 25 27 30 m12 10,9 9,4 8,6 7,6 t
3,125 m 2,4 20,2 22 25 m12 10,9 9,41 t
50 52 55 m4,2 4 3,7 t
20 22 25 27 30 32 35 36 38,7 40 42 45 m12 10,8 9,3 8,5 7,5 6,9 6,2 6 6 5,8 5,5 5,05 t
20,1 22 25 27 30 32 35 36,1 38,8 40 m12 10,8 9,3 8,5 7,5 7 6,2 6 6 5,8 t
20,2 22 25 27 30 32 35 36,4 37,2 40 42 45 4712 10,9 9,4 8,6 7,6 7 6,3 6 6 5,5 5,2 4,8 4,5
20,2 22 25 27 30 32 35 36,4 37,2 40 m12 10,9 9,4 8,6 7,6 7 6,3 6 6 5,5 t
MDT 268 J12
MD
T2
68
mast & mechanisms
3,33
m
P 61 A
10m
5m
V 60 A
5,4
m
6 m
H (m)66,461,456,451,446,441,436,431,426,421,416,4
H (m)64,761,356,351,346,341,336,331,326,321,316,3
10m
5m
121110987654321
13121110987654321
V 63 A
10,6
m
6 m
H (m)74,971,566,561,556,551,546,541,536,531,526,521,516,5
10m
5m
13121110987654321
3,33
m
P 62 A
10m
5m
H (m)69,766,361,356,351,346,341,336,331,326,321,316,3
1413121110987654321
HH
-0,7
m=
HH
=
H (m)52,447,442,437,432,427,422,417,412,4
10m
5m
10987654321
ZD 463
1,66
m
H (m)61,358534843383328
10m
5m
121110987654321
1,5
m
4,5 m
H (m)69,265,862,557,552,547,542,537,532,527,522,517,512,5
10m
5m
1413121110987654321
ZX 6830
1,5
m
6 m
B 60 A
HH
-0,7
m=
HH
=
3,33
m
3,33
m
3,33
m
P 61 A
10m
5m
V 60 A
5,4
m
6 m
H (m)66,461,456,451,446,441,436,431,426,421,416,4
H (m)64,761,356,351,346,341,336,331,326,321,316,3
10m
5m
121110987654321
13121110987654321
V 63 A
10,6
m
6 m
H (m)74,971,566,561,556,551,546,541,536,531,526,521,516,5
10m
5m
13121110987654321
3,33
mP 62 A
10m
5m
H (m)69,766,361,356,351,346,341,336,331,326,321,316,3
1413121110987654321
HH
-0,7
m=
HH
=
H (m)52,447,442,437,432,427,422,417,412,4
10m
5m
10987654321
ZD 463
1,66
m
H (m)61,358534843383328
10m
5m
121110987654321
1,5
m
4,5 m
H (m)69,265,862,557,552,547,542,537,532,527,522,517,512,5
10m
5m
1413121110987654321
ZX 6830
1,5
m
6 m
B 60 A
HH
-0,7
m=
HH
=
3,33
m
3,33
m
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,operating instructions and other instructional plates must be read and understood prior to operating the crane.
17
MDT 268 J12
ch - PShp kW
m/mint
Þ2,66
Þ106
Þ306
Þ404,5
Þ Þ Þ Þ Þ Þ563
821,5
1,312
512
1512
209
286
413 50 37 337 m
m/mint
3,8 Þ
6Þ44 Þ56
4,5Þ Þ Þ Þ80
31161,5
1,9 Þ
1222 28
9406
583 75 55 766 m
m/min 0 Þ50 (12 t) - 0 Þ 100 (6 t) - 0 Þ 120 (3 t) 5,5 46 DVF 4
4 x 7 4 x 5,213,5 - 27V 60 A
m/min
2 x 7,5 2 x 5,5RVF 162Optima + 0 Þ 0,8tr/min
U/min - rpm
RT 544A1 - 2VR 13 m
50 LVF : 75 kVA - 75 LVF : 100 kVA - 100 LVF : 125 kVA
CEI 38 IEC 38 kVA
400 V (+6% -10%)
50 LVF 30Optima
75 LVF 30Optima
m/mint
0 Þ
6Þ60 Þ80
4,5Þ Þ Þ Þ110
31621,5
0 Þ
1230 40
9556
813 100 75 941 m
100 LVF 30Optima
4 x 5 4 x 3,715 - 30ZD 463
m/minRT 443A1 - 2V
6 x 7 6 x 5,213,5 - 27ZX 6830
m/minRT 544A1 - 2V
V 63 A
305682
m/min
1,5 3 6 t
+ 25%
50 LVF 30 Optima
44
80
116
m/min
1,5 3 6 t
+ 25%
75 LVF 30 Optima
60
110
162m/min
1,5 3 6 t
+ 25%
100 LVF 30 Optima
MD
T2
68
symbols glossary
18AnchorStools
Anemometer
Ballast
Cab
Chassis
ClimbingEquipment
Controls
CounterJib
Cross-ShapedBase
Curve TrackTravelingEquipment
ElectricalRequirement
Hoist
HoistingMechanism
HydraulicEquipment
Jib
JibExtension
Mast
Reeving2-Part
Reeving4-Part
Straight TrackTravelingEquipment
Swing
Traveling
TraversingTrolley
Traversing Trolley& Load Diagrams
Trolley
Weight inBaseBallast
MD
T2
68
notes
19
Constant improvement and engineering progressmake it necessary that we reserve the right to makespecification, equipment and price changes withoutnotice. Illustrations shown may include optionalequipment and accessories, and may not include allstandard equipment.
AmericasBrazilAlphavilleTel: +55 11 3103 0200Fax: +55 11 4688 2013
MexicoMonterreyTel: +52 81 8124 0128Fax: +52 81 8124 0129
Europe, Middle East, AfricaAlgeriaHydraTel: +21 3 21 48 1173Fax: +21 3 21 48 1454
Czech RepublicNetvoriceTel: +420 317 78 9313Fax: +420 317 78 9314
FranceBaudemontTel: +33 385 28 2589Fax: +33 385 28 0430
CergyTel: +33 130 31 3150Fax: +33 130 38 6085
DecinesTel: +33 472 81 5000Fax: +33 472 81 5010
GermanyLangenfeldTel: +49 21 73 8909-0Fax: +49 21 73 8909 30
HungaryBudapestTel: +36 13 39 8622Fax: +36 13 39 8622
ItalyParabiagoTel: +390 331 49 3311Fax: +390 331 49 3330
NetherlandsBredaTel: +31 76 578 3999 Fax: +31 76 578 3978
PolandWarsawTel: +48 22 843 3824Fax: +48 22 843 3471
PortugalAlfenaTel: +351 229 69 8840Fax: +351 229 69 8848
LisbonTel: +351 212 109 340Fax: +351 212 109 349
RussiaMoscowTel: +7 495 641 2359Fax: +7 495 641 2358
U.A.E.DubaiTel: +971 4 3381 861Fax: +971 4 3382 343
U. K.MiddlesexTel: +44 1 895 43 0053Fax: +44 1 895 45 9500
SunderlandTel: +44 191 522 2000Fax: +44 191 522 2052
Asia – PacificAustraliaMelbourneTel: +61 3 9 336 1300Fax: +61 3 9 336 1322
SydneyTel: +61 2 9 896 4433Fax: +61 2 9 896 3122
ChinaBeijingTel: +86 10 58674761Fax: +86 10 58674760
Xi’anTel: +86 29 87891465Fax: +86 29 87884504
KoreaSeoulTel: +82 2 3439 0400Fax: +82 2 3439 0405
PhilippinesMakati CityTel: +63 2 844 9437Fax: +63 2 844 4712
Factories
BrazilAlphaville
ChinaZhangjiagang
FranceCharlieuLa ClayetteMoulins
GermanyWilhelmshaven
IndiaCalcuttaPune
ItalyNiella Tanaro
PortugalBaltarFânzeres
SlovakiaSaris
U.S.A.ManitowocPort WashingtonShady Grove
Regional Offices
AmericasManitowoc, Wisconsin, USATel: +1 920 684 6621Fax: +1 920 683 6278
Shady Grove, Pennsylvania, USATel: +1 717 597 8121Fax: +1 717 597 4062
Europe, Middle East, AfricaEcully, FranceTel: +33 472 18 2020Fax: +33 472 18 2000
Asia – PacificShanghai, ChinaTel: +86 21 51113579Fax: +86 21 51113578
SingaporeTel: +65 6264 1188Fax: +65 6862 4142
Regional Headquarters
©2008 MANITOWOCPrinted in USA Form No. MDT 268 Part No. 08-008 / 0408 / 1M
www.manitowoc.com