me02w-a16 project profile

24
Portable Bench Bender 11/12/2016 1

Upload: a-q

Post on 13-Jan-2017

29 views

Category:

Documents


0 download

TRANSCRIPT

Portable Bench Bender

11/12/2016 1

Project Team

11/12/2016 2

Project Co-Ordinator:

Asim Qamar

(Instructor-Mechanical)

Shahzad Ahmed (Instructor-Mechanical)

Project Team

11/12/2016 3

Project Executors

Students (ME02W-A16)

Muhammad Bilal Faizan Ahmed

Muhammad Imran Syed Fouzul Azeem Ghulam Hussain

Kaka Hafiz Nawab

Orangzaib Hafiz Muhammad

Owais Muhammad

Hammad Ali

Arsalan Rao Muhammad Rashid

Abbasi Muhammad

Siddique Muhammad

Shahroz

Khurram Naseer Adeel Umair Khan

Muhammad Faraz Muhammad

Manower

Project ME02W-A16Portable Bench Bender

11/12/2016 4

Project ME02W-A16Portable Bench Bender

11/12/2016 5

Bending Range

26 gauge 24 ga. 22 ga. 20 ga . 18 ga. 16 ga. 14 ga. 13 ga.

018" .024" .030" .036" .048" .060" .075" .090"

0.46mm 0.61mm 0.76mm 0.91mm 1.2mm 1.5mm 1.9mm 2.3mm

IntroductionThis Portable and Compact metal benders is able in standard straight bending or Box &Pan brake style. A sheet metal hand brake normally bends sheet metal by using a hingedclamping bar to hold the metal down against the bed. We used “C” clamp to hold a metal.

Basic Operation

Following are instructions on the primary uses of this Portable and Compact Bender.Additionally, information is included on the many ways to use this Portable andCompact Bender, along with specific examples. Becoming familiar with the Portable andCompact Bender and its many uses will allow you to make a variety of useful items.As the operator, you will have to decide on the way in which you will be using thisPortable and Compact Bender. The following are the basic steps you will need to takewhen working with the Portable and Compact Bender. Use an appropriate measuringdevice to measure and:

• Decide on material and measurements to be used.• Decide on the appropriate marking. Decide on the best placement (side) of the markingfor your particular bend.• Decide on the appropriate attachment, Stop Block or Right Angle Bend. Correctorientation of Stop Block.• Insert stock into the Bender and position it properly. Make the first bend.• Check the angle and direction of the bend.• Make all consequent bends. Adjust the work piece as needed.

Warning: Keep fingers and hands away from moving parts at all times.

Bending Range

Project Plan

11/12/2016 6

Project Plan

11/12/2016 7

Project Plan

11/12/2016 8

Project Plan

11/12/2016 9

Project Drawing (Assy.)

11/12/2016 10

Project Drawing (Pos-1)

11/12/2016 11

Project Drawing (Pos-2)

11/12/2016 12

Project Drawing (Pos-3)

11/12/2016 13

Project Drawing (Pos-4)

11/12/2016 14

Project Drawing (Pos-5)

11/12/2016 15

Project Drawing (Pos-6)

11/12/2016 16

Project Drawing (Pos-7)

11/12/2016 17

Project Drawing (Pos-8)

11/12/2016 18

Project Drawing (Pos-9)

11/12/2016 19

Project Activities

11/12/2016 20

Project Activities

11/12/2016 21

Visitors Feed back

11/12/2016 22

Sr.#

Name &Company

Cell No.

Feedback

Sign.

01

02

03

04

05

06

07

08

09

10

11

Visitors Feed back

11/12/2016 23

Sr.#

Name &Company

Cell No.

Feedback

Sign.

12

13

14

15

16

17

18

19

20

21

22

Visitors Feed back

11/12/2016 24

Sr.#

Name &Company

Cell No.

Feedback

Sign.

23

24

25

26

27

28

29

30

31

32

33