meat goat structures shaun jackson, ut extension agent

47
Meat Goat Structures Shaun Jackson, UT Extension Agent

Upload: randall-perry

Post on 17-Dec-2015

226 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Meat Goat Structures Shaun Jackson, UT Extension Agent

Meat Goat Structures

Shaun Jackson, UT Extension Agent

Page 2: Meat Goat Structures Shaun Jackson, UT Extension Agent

Structure Considerations

A design for a barn or other structure can be easily changed on paper. It is much more difficult and costly to change after construction has begun.

The needs of the producers as well as the needs of the animals need to be taken into account.

Page 3: Meat Goat Structures Shaun Jackson, UT Extension Agent

Structure Considerations

Do you want your goats near your home or would you prefer to keep them at a distance?

How much money can you afford to spend for shelter?

Will the proposed shelter provide adequate protection for your goats?

Page 4: Meat Goat Structures Shaun Jackson, UT Extension Agent

Structure Considerations

Are there structures already on the farm that could be converted into goat barns?

How much time is required? Can I live with the proposed

structure?

Page 5: Meat Goat Structures Shaun Jackson, UT Extension Agent

Do you need structures?

Do you really need structures all of the time?

Total confinement of goats is NOT recommended. Shelters are only for goats to escape heat, rain, snow, etc. not a place for them to live.

Page 6: Meat Goat Structures Shaun Jackson, UT Extension Agent

Do you need structures?

Goats are adaptive, meaning that they can quickly adapt to a variety of environmental conditions.

In areas where there is dense plant cover and during warmer weather it may not be necessary to provide manmade shelter.

Page 7: Meat Goat Structures Shaun Jackson, UT Extension Agent
Page 8: Meat Goat Structures Shaun Jackson, UT Extension Agent

Climate Considerations

In areas where extreme weather conditions are possible, shelter should be provided.

This is also influenced by the season. Shelter is more important during the winter months.

Page 9: Meat Goat Structures Shaun Jackson, UT Extension Agent

Three Types of Shelter

Natural Permanent/Stationary Movable

Page 10: Meat Goat Structures Shaun Jackson, UT Extension Agent

Barns

Construction of a barn is the most expensive and time consuming method of providing shelter.

Before beginning construction of any permanent structure, check with local government officials regarding zoning and building regulations.

Page 11: Meat Goat Structures Shaun Jackson, UT Extension Agent

Permanent Structure Questions

Which direction do the prevailing winds blow? The wind can carry odors to unintended areas and may cause damage if the largest wall is directly facing the wind. Proper orientation can help alleviate this problem.

Page 12: Meat Goat Structures Shaun Jackson, UT Extension Agent

Permanent Structure Questions Continued How well drained is the soil on the

proposed site? Poor drainage can lead to flooding problems. Another problem that may arise from excess water near shelters is foot problems in goats. Excessive moisture encourages bacterial growth and causes goats’ hooves to become soft. This combination can be disastrous, especially if ailments such as foot rot have been present in the herd.

Page 13: Meat Goat Structures Shaun Jackson, UT Extension Agent

Permanent Structure Questions Continued

Is the proposed site on a steep slope, or at the bottom or top of a hill? Barns located at the bottom of hills or on a slope are subject to problems with water runoff during heavy rains.

Page 14: Meat Goat Structures Shaun Jackson, UT Extension Agent

Permanent Structure Questions Continued How close is the proposed site to

trees, power lines, homes, or other buildings? Will the buildings be arranged in such a way as to provide easy access to goats, equipment, and humans? Should extreme weather or a fire occur, building arrangement and proximity become important factors to minimizing damage.

Page 15: Meat Goat Structures Shaun Jackson, UT Extension Agent

Permanent Structure Questions Continued Will the proposed site allow for future expansion? Is there a road or driveway that provides access

to the proposed site? A solid roadbed is recommended for equipment and other vehicles. In areas without a roadbed, equipment tends to sink into the ground during wet weather causing the equipment to “get stuck” as well as contributing to soil erosion. This will make things easier during the building process and once the barn is in operation when transporting materials and animals and when removal of manure is necessary.

Page 16: Meat Goat Structures Shaun Jackson, UT Extension Agent

Permanent Structure Questions Continued

Does the proposed site have access to water, utilities, and other services?

Page 17: Meat Goat Structures Shaun Jackson, UT Extension Agent

Barn Building Plans

UT Extension has many building plans available. Plans may be obtained through your local County Extension Office.

Page 18: Meat Goat Structures Shaun Jackson, UT Extension Agent

To hire a contractor or not… If a contractor is hired to build a

structure the cost increases greatly. However, if construction is not one of

your strong points this may be a viable option.

Many contractors guarantee their work and can accomplish the construction in a fraction of the time.

Keep costs in mind!

Page 19: Meat Goat Structures Shaun Jackson, UT Extension Agent

Moveable Shelters

Moveable shelters are important when rotational grazing and little natural shelter is present.

It is both expensive and impractical to build a barn in every paddock or pasture.

Page 20: Meat Goat Structures Shaun Jackson, UT Extension Agent

Portable Wooden Structures Small wooden structures may be placed on

wheels or skids. This allows for easy transport with a tractor. May also be constructed as a stationary

shelter The front should be left open for easy

access. Provide 5 to 10 Square feet per mature

goat.

Page 21: Meat Goat Structures Shaun Jackson, UT Extension Agent

Photo courtesy of Clear Creek Farms

Page 22: Meat Goat Structures Shaun Jackson, UT Extension Agent

Hoop Structures Also known as “Cattle Panel” or “Livestock

Panel” buildings. Very inexpensive and easily moved. May be disassembled and used for corrals etc. Livestock panels are arched into a Quonset

shape and held in place with “T” posts. The structure is then covered with a tarp or other weatherproof covering. A minimum of 2-3 panels should be used per hoop structure.

Provide a 3 panel hoop structure for every 10-15 goats.

Page 23: Meat Goat Structures Shaun Jackson, UT Extension Agent

Hoop Structures

Photo courtesy of Clear Creek Farms

Page 24: Meat Goat Structures Shaun Jackson, UT Extension Agent

A Note About Materials If you have or are seeking organic

certification, please note that some types of treated wood will NOT pass inspection. Double check regulations before purchasing.

Wood tends to harbor disease and is difficult to disinfect. This can lead to poisoning if treated materials are used and goats become bored and chew on the wood. If this is a concern, consider metal or plastic materials.

Page 25: Meat Goat Structures Shaun Jackson, UT Extension Agent

Structures Summary Structures may be necessary when

natural cover is not present or when severe weather is likely.

Cost, location, and personal preferences are all important considerations for determining what type of structures you need.

Make sure you and your goats can live with the shelters you choose.

Page 26: Meat Goat Structures Shaun Jackson, UT Extension Agent

Meat Goat Equipment

Shaun Jackson, UT Extension Agent

Page 27: Meat Goat Structures Shaun Jackson, UT Extension Agent

Equipment

In this section, equipment is considered to be feeders, waterers, and working facilities.

Page 28: Meat Goat Structures Shaun Jackson, UT Extension Agent

Mineral, Grain, & Hay Feeders

Page 29: Meat Goat Structures Shaun Jackson, UT Extension Agent

Mineral, Grain, & Hay Feeders

Feed is the largest cost in livestock operations

Feeders that minimize waste are strongly preferred

The best feed in the world becomes barnyard litter once it touches the ground.

Page 30: Meat Goat Structures Shaun Jackson, UT Extension Agent

Feeder Considerations: Questions to Ask Yourself

Will my goats waste feed with this feeder? Carefully examine the design. If a goat grasps feed or mineral from the feeder, will the excess fall to the ground?

Page 31: Meat Goat Structures Shaun Jackson, UT Extension Agent

Feeder Considerations: Questions to Ask Yourself

Is this a good feeder for goats?

Page 32: Meat Goat Structures Shaun Jackson, UT Extension Agent

Feeder Considerations: Questions to Ask Yourself

Will all of my goats have easy access to the feed or mineral? If feeders are too crowded, the more aggressive goats will get most of the feed, while the more timid or weaker one may be left out. Providing plenty of feeding space helps to reduce this problem.

Page 33: Meat Goat Structures Shaun Jackson, UT Extension Agent

Feeder Considerations: Questions to Ask Yourself

Will my goats damage the feeder? Feeders should be constructed of sturdy materials. Bored goats tend to want to “play” with objects in their pasture or paddock. Be sure your feeders are strong enough to handle a goat attack.

Page 34: Meat Goat Structures Shaun Jackson, UT Extension Agent

Feeder Considerations: Questions to Ask Yourself

Can my goats get on top of the feeder? If they can they are likely to cause damage to the feeder or injure themselves. Also, if they can get into the hay feeder for instance they will tend to use their feed as bedding, which leads to increased waste.

Page 35: Meat Goat Structures Shaun Jackson, UT Extension Agent

Feeder Considerations: Questions to Ask Yourself

Is the feeder easy to clean and disinfect? As previously stated, sanitation is an important measure to control the spread of disease. Remember metal and plastic is easier to clean than wood.

Page 36: Meat Goat Structures Shaun Jackson, UT Extension Agent

Feeder Considerations: Questions to Ask Yourself

Can the feeder be used by the goats? Is it too restrictive (i.e. cannot get their head through an opening) or is the feed going to be too far for them to reach? Remember if your goats cannot actually eat their feed or mineral, it does them no good. This can be a major problem if your goats have very large horns.

Page 37: Meat Goat Structures Shaun Jackson, UT Extension Agent

Feeder Considerations: Questions to Ask Yourself

Can the feeder be easily moved? In rotational browsing systems where goats are moved often, this is an important consideration. The easier the feeders can be moved the better.

Page 38: Meat Goat Structures Shaun Jackson, UT Extension Agent

Photo courtesy of Bonnie Blue Farm

Page 39: Meat Goat Structures Shaun Jackson, UT Extension Agent

Water Delivery

Water is the most important nutrient to goats

Two main types: Automatic and non-automatic.

Page 40: Meat Goat Structures Shaun Jackson, UT Extension Agent

Automatic Water Delivery

Water is delivered to goats with minimal manual effort

Goats have a constant supply of fresh water

Risk of water line breakage Higher cost in the short run

Page 41: Meat Goat Structures Shaun Jackson, UT Extension Agent

Non-Automatic Water Delivery

Water is physically delivered to goats

Lower cost in the short run; potential higher cost in the long run

Goat could run out of water if the producer forgets to fill the tank

Higher cost in the long run

Page 42: Meat Goat Structures Shaun Jackson, UT Extension Agent
Page 43: Meat Goat Structures Shaun Jackson, UT Extension Agent

Watering Resources

UT Extension has two excellent publications on livestock watering systems; “Solar Powered Livestock Watering Systems” (PB 1640) and “Alternative Livestock Watering Systems” (PB 1641). Both may be obtained at your local UT Extension Office

Page 44: Meat Goat Structures Shaun Jackson, UT Extension Agent

Working Equipment

Corrals and working facilities are needed for performing functions such as treating sick animals, vaccinations, hoof trimming, catching, weighing and loading

Page 45: Meat Goat Structures Shaun Jackson, UT Extension Agent

Working Equipment Corrals and sides should be a

minimum of 4 feet tall Key components include holding

pen, chute, footbath, headgate, and loading ramp

Should also include and area for handlers to disinfect themselves before and after working goats

Page 46: Meat Goat Structures Shaun Jackson, UT Extension Agent

Working Equipment While most of the equipment mentioned

in this section can be built, there are some companies that specialize in goat handling equipment. As a general rule, purchased equipment is much more expensive than handmade equipment. However, purchased equipment is usually of high quality construction and easier to move and may pay for itself in the long run

Page 47: Meat Goat Structures Shaun Jackson, UT Extension Agent

Equipment Summary

Feeders should be provide easy access to feed while minimizing waste

Fresh water should be provided at all times with automatic or non-automatic waterers

Working facilities are important management tools