S.No Items Description

1

2

3 Acoustic door4 False ceiling with 0.9 NRC tiles

5

6 Ceiling mountable 4" Circular CFL lights CFL bulb

7

8 lighting grid Electrical supply with 16 numbers of 16A sockets , MCBs and cabling

9

10

11 Laminated wooden Flooring (imported)

12

13 5.1 Surround sound system (Panasonic)

14

15 Storages made with 18mm PLB with 2mm edge 3500 x 450 x 2100 HT16 Storages made with 18mm PLB with 2mm edge 2800 x 450 x 2100 HT17 Storages made with 18mm PLB with 2mm edge 3500 x 450 x 600 HT18 Storages made with 18mm PLB with 2mm edge 2800 x 450 x 600 HT19 7500 x 400 x 400 HT OVER HEAD STORAGE With M.S.Brackets support20 Plastic Key board (Ebco Company)21 3 Draw storages22 Customized Console Desk for Radio Recording Room. Size Approx 6'x3'

23

24 Curved LED 4K TV (Samsung) 58"25 Carpet in the TV shooting area

Acoustic treatment to contain RT to around 1.0 The treatment will be done inboth the rooms using rockwool, Perforated 12mm boards and wooden panellingupto the work station level

Acoustic Partition wall with 2"x2" battons, Double Gypsum on both sides withrackwool filling

Ceiling mountable CFL lights with 300mmx300mm frame, dual CFL bulbs andmounting arrangement

lighting grid (1mtx1mt matrix with 40NB MS pipe with poder coating, roofhangers, With 16 numbers of 16A sockets , MCBs and cabling

Heavy Curtain Railings with I profile rails and 50 nos of two wheel trollies to‐support the heavy curtain. (Curtain cost not included)

Cotton curtain cloth medium thickness suitably strictched and hanged from thecurtain railing.

Imported Projection screen of 8X6ft. size, Matte White, Wall mountable,Instalock.

63mm thick tile based modular partition with a excluded Aluminums powdercoated. Finish with 9mm pre laminated double skin partition with pinup/markerboard fabric material. Table tops 1600 X750 and Table tops 1200 X600

Video, Audio cables with one video patch and one audio patch bay, 4 sets of AVwall boxes with BNC and XLR panel connectors

UOM Qty Rate Amount

Sqmt 160

Sqmt 10

No 1Sqmt 76

No 12

Sqmt 18

Lot 1

Mtr 9.5

Sqmt 30

Sqmt 76

No 1

No 2

No 10

No 1

No 1No 1No 1No 1No 1No 9No 9No 1

Lot 1

No 1Sqmt 18

INTERIOR WORKS BOQ FOR MEDIA LAB DPS NOIDAITEM DESCRIPTIONS Unit

A PARTITION AND PANELLING

1

1.1 Using Gypsteel (India Gypsum) / USG or Equivalent make Sqm

2 Sqm

3 Sqm

4 Sqm

5 Sqm

ITEM NO.

Providing and fixing GI Frame work of 48 mm boxed studs (each box stud size - 0.55 mm thick, having one flange of 34mm and another flange of 36 mm) for vertical members and U-channels (0.55 mm thick, having equal flanges of 32 mm) for horizontal members placed at 610 mm centre to centre both ways with joints staggered to avoid through joints. The frame work is to be adequately anchored in ceiling and on floor having additional framework of rough wood treated with anti-termite and fire retardant paint at junctions of doors, windows.(Glazed/door area shall not be measured.)

Providing & fixing ROCKWOOL insulation of 50mm thick Insulwool manufactured by wrapped in tissues sheet, fixed to partitions including cost of wire netting as required as per directions of Engineer-In-Charge.

Providing and fixing 10mm thick TEMPERED clear glass in window with wooden frame OR FRAMELESS or in frame shall be fixed with wooden beading complete as per drawing.(Wooden frame/ Beading shall be measured separately)

Providing and fixing 12.5mm thick (Single layer) plain Gyp board cladding (confirming to IS -2095 - 1982 and 2543-1981) over G.I/ALuminium frame work fixed with dry wall screws of 25mm at 300mm centre, square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, paper tape and two coats of primer suitable for Gyp board. The external angles of the partition having Gyp board has to be protected by using angles, beads (25x25x0.5) and all exposed edges of Gypboard have to be protected edge bead 25x12.5x0.5). (GI frame work will be paid separately)

Providing and fixing 0.8 mm thick laminate on one side of GI/Aluminium frame work in partitions (already fixed and paid separately) over 12thick commercial ply finished as per design given in drawing. All the edges of laminate should be jointed with 45 degree as per detail. The item includes cutting for electrical switches/ appliances, making grooves and desired shade and finish complete as per design and drawing.

6 Sqm

7 Sqm

8 Sqm

9 Sqm

10 Sqmt

11 Sqmt

TOTAL Rs.

B FALSE CEILING

1.1 1 Sqm.

Providing and fixing 4 mm thick veneer on one side of GI/Aluminium frame work in partitions (already fixed and paid separately) over 12thick commercial ply finished as per design given in drawing. All the edges of laminate should be jointed with 45 degree as per detail. The item includes cutting for electrical switches/ appliances, making grooves and desired shade and finish complete as per design and drawing.

Providing and fixing 6mm thk. LAQUERED glass writing board in paneling over 9mm+6mm thick marine ply board on GI frame work (already fixed and paid separately) fixed with 3M tape. The glazing shall be fixed in concealed aluminum channel with backer rod and non-staining clear silicone sealant complete as per design and drawing.(ONLY FOR THE FACULITY)

Providing and fixing fabric paneling with approved, fabric wrapped with 6 mm thick synthetic foam over 12 mm thick tackable board of approved quality & make duly anchored to existing framework including necessary groove by using clip in CPVC profiles etc. complete all as per design and drawing.(Basic rate of fabric is Rs. 550/- per m for 1.2 m width)

Providing and fixing 12mm thk commercial ply on existing GI frame/AL frame finished with paint (to be paid seperately)

Acoustic treatment to contain RT to around 1.0 The treatment will be done in both the rooms using rockwool, Perforated 12mm boards and wooden panelling upto the work station level

Acoustic treatment to contain RT to around 1.0 The treatment will be done in both the rooms using rockwool, Perforated 12mm boards & fabrick panelling above till ceiling level

Note:*All cantilevered ceilings shall be supported with MS framework of appropriate thickness and size so that no sag is observed. *Covering of all the light fixtures with Gyp board or other material so that no light is observed from the grills/ opening above false ceiling.*Deduction shall be made for area more than 0.50 Sqm of light fixtures, diffuser, trap door etc.

2 Sqm

3 Rmt

4 Nos

5 Sqm

TOTAL of B Rs.

C DOOR, WINDOW & GLAZING

Providing and fixing acoustical suspended ceiling system consisting tiles of sizes 600x600x16mm with NRC-0.9 of nominal size laid on hot dipped galvanized grid system with 15mm wide T-section flanges, main runners and double stitching cross runners of size 15x44x8mm thick to be interlocked between main runners at 600mm centers to be supported independently 600x600mm modules to be framed by fitting cross tees and perimeter wall angle 19x22x3000mm long.All exposed faces shall be powder coated color white. The frame shall be suspended with hangers of G.I. wire 4.0mm dia to be fixed by approved rawl plug, level adjusters and screws etc, all as per recommendations of manufacturer. Leveling should be done and checked by using laser gun method. The work includes provision for AC diffusers, grill, fire detection system /Light fixtures involving bearing section or support patress on back of tile etc. complete. The cutting of light fixtures, sprinklers to be in centre of tile. All the cut tiles required to be painted to match the colour of tile. The make are armstrong/amf

Providing and fixing in position pelmet of overall size 200mm x 200mm / 200mm x 250mm as per detail drawing. Base structure shall be made out of GI frame works used in gypboard ceiling. 19mm thick marine ply painted with plastic emulsion paint shall be fixed on it to receive blinds channel. The job shall include supports (GI/Al/Wooden Section) for adjacent wall/true ceiling/slab.

Providing and fixing in position trap door for services in gypsum ceiling. Size 600X600 (Lafarge/ Saint Gobain make)

Providing and fixing the aluminium open cell ceiling starlam 9 of size 600x1200mm balde and the main blade to be 9mm/H-42mm/Pitch-66mm. The entire panels to be fixed by U-94 carrier and clips. The aluminium panels should be powder quoted as per the approved colour from the project manager. Base rate Rs. 5500 /Sqm

1 Cum

2

2.1 Above specification of size 1200x2400 mm Nos2.2 Above specification of size 1000x2400 mm Nos2.3 Above specification of size 1200x2100 mm Nos2.4 Above specification of size 1000x2100 mm Nos

3

3.1 Plain frosted film (sand blasted look) Sqm

TOTAL of C Rs.

D PAINTING AND FINISHING

1 Sqm

Providing, making and fixing approved quality Hard Wood white cedar/steam beach/teak wood door frames, chemically treated, Kiln-seasoned, antitermite treated, shaped, grooved, mitered joint arrangement, moldings, rebates, including use of approved water repellent adhesive, GI screws, pins, etc. Frames shall be fixed with 3 nos. G.I. holdfast 225 x 20 x 4 mm with split end on either side and well grouted with cement concrete mix 1:2:4 (1 cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size) adjustable lugs with split end tail to each jamb, etc. Also to include french polish in desired shade finish and in approved colour on all exposed faces, surfaces of frame in contact with masonry / concrete surfaces shall be painted with one coat of bituminous paint of approved quality etc. complete to the entire satisfaction of the Engineer-in-charge.

Providing and fixing 48mm thick flush door shutter of approved manufacture both side commercial, finished with 1 mm laminated of approve make and shade fixed in pattern to both faces with maple wood lipping all around fixed with heavy duty ball bearing hinges 4mm thk of size 102mmx76mmx2.5mm (4 nos) as approved. The all hardware like lock, handle, door closer etc. shall be in SS finish as per hardware schedule and drawing of approved make including SS screws, door stopper Enviroseal etc from doorset/equivalent, french polish in desired shade finish etc complete as per detail drawing.make Hafele, Dorset, ozone or equivalent

Providing and fixing 3M film plain/ coloured in pattern over glass etc. complete all as per drawing.(Actual film area shall be measured and paid for)

Providing and applying POP punning with minimum thickness of 6mm on wall and ceiling including finishing the surface smooth in line and level to the entire satisfaction of Engineer in charge including scaffolding/hacking of existing surface etc. complete as per directions of Engineer-in-charge. (At all heights & Levels) scaffolding to be provided by the contractor.

2 Sqm

3

4

TOTAL for D

E FLOORING

Providing and applying Plastic emulsion paint of approved colour/shade, brand & manufacture in two coat as required to get desired finish including preparing surfaces, filling up with gypsum or approved crack filler, binder; cleaning and making the surface dust-free, applying a sealer or primer coat of paint as recommended by approved paint manufacturer. Item also required scaffolding, cleaning and protecting till the handing over of site all complete to entire satisfaction of the Engineer-in-charge.

Providing and applying Coloured texture paint to internal surface of walls as per manufacturer's specification and approved by Engineer in charge including a coat of approved primer to give an even shade including scaffolding etc. complete.(Basic installed Rate of textured Paint including all taxes, duties & cartage shall be Rs.125/- per Sqm). Works at all heights and leads. The basic rate shall be the final rate after application at site in position ( installed rate) of the paint manufacturer or authorized applicator. The variation above Rs 125/ Sqm. on the basic rate shall be reimbursed based on submission of documentary evidence.

Providing and fixing fabric backing commercial grade wall paper of approved shade with recommended adhesive of approved make which have 100% washable, scratch resistance, peel proof, and fire retardant properties. Cost to include preparation on the punned surface for receiving the wall paper as per the manufacturer specification. Base rate Rs. 1500 /Sqm

Note:The basic rate of material shall be the landed cost of the Marble /Granite / Tiles for all sizes including cost of transport & sales tax etc. to be ascertained of based on documentary evidence.Any difference on the basic rate of material i.e. increase or decrease shall be considered for re-imbursement /refund with wastage of 15% for stone work and 2.5% for tile work of finished area. No overhead and profit shall be payable on account of this variation.

1

1.1

1.2 Vitrified tile ((Basic rate of Tile Rs.650/- per Sqm) single soluble Sqm.

1.3 Vitrified tile ((Basic rate of Tile Rs.1000/- per Sqm) double charge Sqm.

2.0 Sqm

3.0 Sqm

TOTAL OF E

F LOOSE FURNITURE

1 Nos

Providing and laying approved quality, colour, design and shade 10mm thk fully homogeneous Vitrified tile confirming to EN 176 and water absorption less than 0.05% in floor, treads, landings, sills, thresholds, risers, skirtings, dado in pattern including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement about 2 kg/Sqm over cleaned surface and spreading neat cement paste using minimum cement about 4.5 kg/Sqm over cement mortar bed, joints to be cleaned and grouted with matching colour approved quality readymade grout, curing, cleaning, etc. to required line, level, etc. all complete at all leads, lifts and heights to the entire satisfaction of the Engineer-in-charge.

Vitrified tile in floor, wall, sills, thresholds,, treads over 20mm thick cement mortar in mix ratio 1:4 (1 cement : 4 coarse sand by volume);

Providing and laying the PP carpet rolled type with and underlay of 6mm. The shade and colour to be approved y the client. The make are CCIL/UNITEX. The basic price is to be 1450/-. No seperate wastage is to be given for the curved spaces.

Supplying and fixing of 10mm thk laminated wooden flooring. Tiles to be fixed . The floor should be cleaned before laying. Edges of tiles to be fixed with moulding of approved colour and design. To be fixed as per manufacturers specifications. Pergo / Armstrong , AC IV Grade, Basic rate Rs. 1500 / - Smt type AC4

Providing and making modular workstation of size 1300 x900 x1200 with 60mm thixk partition these to be linear type worstation tables with CPU trolley ,keyboard tray & pedestal with 2 drawer & 1 file unit as per design of BP Ergo/unicos/v3/wipro

2 Nos

3 Nos

4 Sqm

5 Sqm

6 Sqm

Providing & fixing customised console table of 2100 mm (L) X 900 mm (D) X 750 mm (H) in radio room finished as per the design .

Providing & fixing customised table of 1800 mm (L) X 750 mm (D) X 750 mm (H) in radio room finished as per the design .

Providing and constructing low height storage of width 450mm and size as per drawings, with top, sides and bottom in 19 mm thick prelaminated Board with additional board of 19 mm thick Prelaminated/Post laminated board, back in 8mm thick commercial ply, intermediates in 19 mm thick commercial ply, shutter in 19 mm thick Prelaminated ply. All external surfaces to be finished in approved laminate, with balancing laminate on the interior surface. All exposed edges to be finished in approved PVC edge binding. Rate to include hardware such as approved locks, auto closing hinges for shutters, approved handles, door stop, tower bolt, etc. complete. Hardware Hettich & equivalent.The make are unicos/v-3/BP Ergo/wipro

Providing and constructing full height storage of width 375-600mm and size as per drawings, with top, sides and bottom in 19 mm thick commercial ply, back in 8mm thick commercial ply, intermediates in 19 mm thick commercial ply, shutter hollow core with framework as per drawings in 19 mm thick commercial ply, with 4mm thick commercial ply panel. All external surfaces to be finished in approved laminate, with balancing laminate on the interior surface. All exposed edges to be finished in approved PVC edge binding. Rate to include hardware such as approved locks, auto closing hinges for shutters, approved handles, door stop, tower bolt, etc. complete.

Providing and fixing pigeon hole storage with size of each pigeon hole as 300x300x400mm with top, sides made from 19 mm thick prelaminated ply. back to be made from 8 mm thick commercial ply. Intermediates (Horizontal and vertical) in 12 mm thick commercial ply. All exposed edges to be finished in approved PVC edge binding. All exposed surfaces to be finished in approved laminate with balancing laminate on the internal surface.

7 Sqm

8 Sqm

9 Sqm

10 Nos

11 Nos

12 Nos

Providing and fixing DB shutters with top, sides in 19mm thick commercial plywood, back in 8mm thick commercial plywood and finished in approved 1mm thick laminate from all exposed sides and 0.8mm thick balancing laminate on the under side. The shutters to be in 25mm thick commercial grade block board finished in approved shade 1mm thick laminate on exposed surface and balancing laminate on the interior surface with approved beading and framework in seasoned teak wood of section 50mmX50mm, approved handle, tower bolts, Locks, magnetic ball-catch etc complete as directed. Each shutter shall have one grill at the bottom and one at the top.

Providing, fabricating and fixing in position cabinet of various heights and 400mm deep.The Box of the cabinet will be in 19mm thck comercial ply including the front shutter glass.The cabinet shall be consist of library kind of storage with glass in front shutters .The cabinet having adjustable shelves, shutter finished with laminate on external exposed surface and on inside surface of board. The item including 100mm high Laminate skirting, adjustable Glass shelves on S.S. pin, florescent light at the top of storage, Earl Behari hinges for storage shutter, knob, lock, handle as approved and french polish finish in desired shade complete in all respect as per drawing. (Elevation area shall be measured for payment) The make are unicos/v-3/BP Ergo/wipro

Providing and making notice boards (fabric) in Ply/board finished with laminate and the front shutter to be openable glass. Custom made

Providing and fixing single seater sofas / Lounge Chairs with TW under structure, brushed SS leg support finished in high density moulded foam and composite leather upholstery as per attached image etc. complete. Rs. BR 10,000 per seat

Providing and fixing double seater sofas with TW under structure, brushed SS leg support finished in high density moulded foam and composite leather upholstery as per attached image etc. complete. Basic rate for upholstery Rs. 600/- per Rmt.

Providing and fixing Three seater sofas with TW under structure, brushed SS leg support finished in high density moulded foam and composite leather upholstery as per attached image etc. complete. Rs. BR 10,000 per seat

13 Nos

14 Nos

15 Nos

16 Supplying chairs matching existing

16.1 Nos

16.2 Nos

17 SQM

18 Sqmt

19 Sqmt

TOTAL OF F

Providing and constructing Centre tables 900mm dia as per the details given below with table top in 10mm thick fused toughened glass of Saint Gobain make, with tubular or box supports in Brushed Stainless Steel Finish ( 316 grade ) average 25mm dia, 1mm thick, complete as directed.

Providing and constructing Side tables of size 450 mm x 450 mm x 450 mm and shapes as per the details given below with table top in 10mm thick fused toughened glass of Saint Gobain make, with tubular or box supports in Brushed Stainless Steel Finish ( 316 grade ) average 25mm dia, 1mm thick, complete as directed.

Providing and placing the lecturer desk for the lecturer rooms of standard size as per the layout make BP Ergo/unicos/v3/wipro

Medium back witn all ficility like height adjustment, seat back edjestment etcHigh back witn all ficility like height adjustment, seat back edjestment etc

lighting grid (1mtx1mt matrix with 40mm X 40mm MS pipe with powder coating, roof hangers, With provision for 16 numbers of 16A sockets , MCBs and cabling

Heavy Curtain Railings with I ‐profile rails and 50 nos of two wheel trollies to support the heavy curtain. (Curtain cost not included)

Cotton curtain cloth medium thickness suitably strictched and hanged from the curtain railing.

INTERIOR WORKS BOQ FOR MEDIA LAB DPS NOIDAQTY AMOUNT

310

310

15

350 -

175

RATE RS

200

25

50

700

135

175

75

100

10

5

100

1

RO 5 RO 5

50

50

250

100

100

150

175

24

1

1

10

15

10

10

10

10

2

1

1

2

2

1

24

3

20

40

85

PROJECT: MULTI PURPOSE BLOCK AT DPS NOIDA. UP.

SUB HEAD : ELECTRICAL , TELECOMMUNICATION AND FIRE ALARM SYSTEM

ESTIMATES

S.N DESCRIPTION1.0 POINT WIRING AND SUBMAIN WIRING

A a One light point controlled with normal range of switchesB b Loop points ie without switches

C

D f Circuit wiring with 2x2.5+1.5sq.. Copper wirres in conduits

1.1

Wiring for following points with 1.5 sq.mm FRLS PVC insulated flexible copper conductor single core wires of 1100 V grade in recess or surface FRLS PVC ISI marked conduit (IS-9537- Part -III) with plate type modular switches and accessories mounted on phenolic laminated hylem sheets complete with accessories such as bends, junction boxes, pull wire including 1.5 sq.mm copper conductor green color earth wire for earthing of all metal boxes, light fixtures, exhaust fan etc. complete as required excluding circuit wiring with 2x2.5+1.5 sq. mm FRLS wires.

e Two way light controlled points with 2 nos. 6A two way switches at different locations.

Wiring for power/ UPS socket outlets with following sizes FRLS PVC insulated flexible copper conductor single core wires of 1100 V grade in recess or surface FRLS PVC ISI marked conduit (IS : 9537 Part-III) complete with accessories such as bends, junction boxes, pull boxes etc. with plate type modular switches and sockets, 1.6 mm thick G.I. boxes of suitable size, embedded in wall and concealed and flushed with wall or mounted on trunking including cutting and refilling the chases etc. inclusive of circuit wiring as required, and inclusive of FRLS PVC insulated copper earth conductor for socket outlets as per specifications.

1.2

1.3

1.4

1.5

a 6A 5 pin raw power socket outlet with 6A switch mounted side by side with 3C1.5 sq.mm FRLS PVC insulated sheathed flexible copper conductor cables for circuit and wiring including the cost of circuit wiring.The wiring shall be done partly through raceways and partly through conduits. Maximum five sockets per circuit.

b 16A 6 pin raw power socket outlet with 16A switch mounted side by side with 3C4.0 sq.mm FRLS PVC insulated sheathed flexible copper conductor cables for circuit and wiring including the cost of circuit wiring.The wiring shall be done partly through raceways and partly through conduits. Separate circuit for each point. -

c 16A 6 pin raw power socket outlet with 16A switch mounted side by side with 3C4.0 sq.mm FRLS PVC insulated sheathed flexible copper conductor cables for circuit and wiring including the cost of circuit wiring.The wiring shall be done partly through raceways and partly through conduits. Two points per circuit.

3nos. 6A three pin UPS socket outlet controlled with 1 nos. 16A switch mounted side by side with 3C2.5 sq.mm. FRLS PVC insulated flexible copper conductor sheathed cable as per IS-694.The wiring shall be done partly through raceways and partly through conduits. In floor it shall carried out in raceways and the vertical rise through partition it shall be through MS conduits. Maximum three work stations per circuit.(QUOTED WITH PVC CONDUIT)

1.6

1.7

TOTAL for "Point Wiring and Submain

2.0 CABLES

2.1 Supplying of following types and sizes of

ABCDE

2.2

2nos. 6A three pin UPS socket outlet controlled with 1 nos. 16A switch mounted side by side with 3C2.5 sq.mm. FRLS PVC insulated flexible copper conductor sheathed cable as per IS-694.The wiring shall be done partly through raceways and partly through conduits. In floor it shall carried out in raceways and the vertical rise through partition it shall be through MS conduits. Maximum three work stations per circuit.(QUOTED WITH PVC CONDUIT)

1nos. 6A three pin UPS socket outlet controlled with 1 nos. 6A switch mounted side by side with 3C2.5 sq.mm. FRLS PVC insulated flexible copper conductor sheathed cable as per IS-694.The wiring shall be done partly through raceways and partly through conduits. In floor it shall carried out in raceways and the vertical rise through partition it shall be through MS conduits. Maximum three work stations per circuit.(QUOTED WITH PVC CONDUIT)

1.1 KV grade XLPE insulated PVC sheathed armoured power cables conforming to IS - 1554 with up to date amendements.

a 3C 2.5 sq.mm. cu conductorb 4C 6 sq.mm. cu conductorc 4C 10 sq.mm. cu conductord 4C 16 sq.mm. cu conductore 4C 25 sq.mm. cu conductor

Laying of the following sizes of cable on wall or on existing cable tray with clamping, dressing or drawn in existing ducts all as required.

ABCDE

2.3

ABCDE

2.4

A

B

TOTAL for "Cables" carried over to SUMMARY

3.0 DISTRIBUTION BOARDSA Termination of UPS D.B (DB will be provided ny the client)B Termination of Lighting D.B (DB will be provided ny the client)C Termination of Power D.B (DB will be provided ny the client)D Termination of Emergency D.B (DB will be provided ny the client)

a 3C 2.5 sq.mm. cu conductorb 4C 6 sq.mm. cu conductorc 4C 10 sq.mm. cu conductord 4C 16 sq.mm. cu conductore 4C 25 sq.mm. cu conductor

Making end termination with brass double compression gland for PVC insulated and PVC sheathed Aluminium conductor cable of 1.1 KV grade of the following sizes as required.

a 3C 2.5 sq.mm. cu conductorb 4C 6 sq.mm. cu conductorc 4C 10 sq.mm. cu conductord 4C 16 sq.mm. cu conductore 4C 25 sq.mm. cu conductor

Fabricating and installing following size of perforated galvanised cable trays made of pre galvanised sheets including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with 10mm dia fully threaded GI rods with dash fasteners and GI slotted C channel base supports as required :

a 100 mm. width x 40 mm. depth x 1.6 mm. thickness GI cable tray

b 150 mm. width x 40 mm. depth x 1.6 mm. thickness GI cable tray

TOTAL for "Distribution Boards " carried over to SUMMARY

4.0 LIGHTING FIXTURES AND FANS

4.1

4.2

4.3

4.4 Installation of ceiling fan, including wiring the

4.5 Supply of 1400mm dia sweep ceiling fans complete

5.0 WIRING FOR NETWORKING SYSTEM

5.1 Supply and fixing the following sizes of

bends, junction boxes, pull boxes etc., inrecess or on surface including cuttingchases in the walls/floors and making good

Recessed mounted 2x28 W light fixtures or approved equal in quality and design complete with 2 x 28 W lamp, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

Recessed mounted 600x600 mm (2x36 W) light fixtures or approved equal in quality and design complete with 2 x 36 W lamp, ballast and all accessories as required.c

Supply of 230dia heavy duty exhaust fan suitable for 230V single phase 50Hz AC supply system complete with louvers etc.as

down road connections, testing, commissioning etc. As required.

with capacitor, down rod, termonal blocks, wiring the down rod, testing commissioning as required.

TOTAL for "Lighting Fixtures and Fans " carried over to SUMMARY

FRLS PVC ISI marked conduits (IS : 9537Part-III) complete with accessories such as

the same complete as required.

5.2 Wiring for Voice/Data system with followingsizes PVC insulated annealed tinnedelectrolytic copper conductors cable inexisting recessed conduits/ cable trunkingsystem as required.

5.3 Providing and fixing in position followingtelephone tag block(KRONE TYPE) inpowder coated sheet steel enclosure withhinged door having locking arrangement

5.4 Providing and fixing in position 75 mm x 75mm x 75 mm G.I. box covered with platetype shuttered type data jack outlet 4nos-RJ 45 on one plate

5.5 Providing and fixing in position 75 mm x 75mm x 75 mm G.I. box covered with platetype shuttered type data jack outlet 2nos-RJ 45 on one plate

5.6 Wiring for TV outlet with PVC insulatedcopper conductor co-axial cable (RG - 6) inexisting conduits from junction box to outletbox.

5.7 Providing and fixing in position 75 mm x 75mm x 50 mm G.I. box covered with platetype T.V. Antenna outlet

a 25 mm dia MEDIUM GRADE

a CAT-6 enhanced data cable b 20 pair 0.61mm armoured tinned copper cable

a 50 pair

6.0 ANALOGUE ADDRESSIBLE TYPE FIRE ALARM SYSTEM

6.1 2 - Loop Analogue Addressable fire Alarm panel

6.2 Analogue Addressable Multotech Smoke Detector

6.3 Analogue Addressable Heat Detector

6.4 Analogue Addressable Manual Call Point

6.5 Control Output Module

6.6 Control Intput Module

6.7 Loop Sounder

6.8 Auto Dialer

6.9

6.1 Supplying and laying of 25 mm dia. 16 SWG MS Conduit

6.11 Supplying and laying of 20 mm dia. 16 SWG MS Conduit

6.12 Response Indicator

Total for fire alarm system carried over to summary

TOTAL for "Telecommunication system" carried over to SUMMARY

Supply, fixing, effecting proper connection, testing & commissioning of following:

Supply and fixing of 2c 1.5 sqmm copper FRLS copper Armoured cables

7 PUBLIC ADDRESS SYSTEM

7.1

7.2

7.3

7.4

TOTAL

SUMMARY TOTAL FOR ELECTRICAL, FAS & PA

Supply, Installation, Testing & Commissioning of Digital Voice Evacuation system including panels, other hardwares & softwares-capable of supervision of all circuits and 2 way Communication Fire Fighters Telephone System including panels, other hardwares & softwares-capable of supervision of all circuits. The Digital Voice Evacuation system capable of taking upto 2 zones to be with required suitable amplifiers and hardwares like MIC, racks etc. for 50 nos speakers (as mentioned in this tender) and accessories required to complete the systems. Both systems to be integrated with each other (Fire Detection & Public address System). MAKE BOSCH

Supply, Installation, Testing and Commissioning of Fire panel supervised 70db-84db Ceiling Mounted Speakers Cum Hooter complete with ceiling arrangements and all accessories etc.MAKE BOSCH

Supply, Installation, Testing and Commissioning of Fire panel supervised 70dB-84dB Wall Mounted Speakers Cum Hooter complete with wall mounting arrangement and all accessories etc.MAKE BOSCH

Supplying, laying, terminating & connecting of 2 core 24/0.20 sq.mm flexible copper conductor cable with terminations, labour and other petty material etc. complete in all respect.

PROJECT: MULTI PURPOSE BLOCK AT DPS NOIDA. UP.

SUB HEAD : ELECTRICAL , TELECOMMUNICATION AND FIRE ALARM SYSTEM

ESTIMATES

UNIT QTY Rate AMOUNT

NO 20 - NO 60 -

NO 10 -

M 1550 - - -

-

-

NO 5 -

-

NO 30 -

-

NO 10 -

-

NO 30 -

-

NO 10 -

-

NO 5 -

- - - - - - - -

-

M 250 - M 420 - M 650 - M 350 - M 150 -

-

-

M 250 - M 420 - M 650 - M 350 - M 150 -

-

-

M 250 - M 420 - M 650 - M 350 - M 150 -

- -

-

M 40 -

M 40 -

- - - -

Nos - Nos - Nos - Nos -

-

-

- - -

No. 30 -

-

No. 30 -

-

NO 2 -

- -

NO 15 -

- -

NO 15 -

-

-

- - - - - - - - -

- M 450 -

- - - - - -

M 550 - M 60 -

- - - -

NO 2 - - - - -

NO 10 - - - - -

NO 10 - - - - -

M 80 - - - -

NO 2 - -

-

-

- -

-

No 1 -

No 75 -

No 20 -

No 8 -

No 1 -

No 1 -

No 8 -

No 1 -

M 850 -

M 20 -

M 10 -

No 15 -

-

Nos. 1 -

-

Nos. 15 -

-

Nos. 5 -

-

Rmt. 500 -

- -

-

Media Lab Works - MECS.No Description Unit Rate

Section-I

1 Sq.Mt

2 Sq.Mt

3 Acoustic door 8.5'x3' with frame, door closer and handle No

4 No

5 False ceiling with tiles Sq.Mt

6 No

7 Ceiling mountable 4" Circular CFL Lights No

8 Sq.Mt.

9 lighting grid Electrical supply with 16 numbers MCBs and DB lot

10 Mtr

11 Sq.Mtr

12 Laminated wooden Flooring (imported) Sq.Mt

13 No

14 Storages made with 18mm PLB with 2mm edge 3500 x 450 x 2100 HT No15 Storages made with 18mm PLB with 2mm edge 2800 x 450 x 2100 HT No16 Storages made with 18mm PLB with 2mm edge 3500 x 450 x 600 HT No17 Storages made with 18mm PLB with 2mm edge 2800 x 450 x 600 HT No18 7500 x 400 x 400 HT OVER HEAD STORAGE With M.S.Brackets support No19 Plastic Key board (Ebco Company) No20 Installation of furniture No21 Customized Console Desk for Radio Recording Room. Size Approx 6'x3' No22 Carpet in the TV shooting area Sq.Mt.

Section-II

1 No

2 Storages made with 18mm PLB with 2mm edge 1575 x 450 x 1200 HT No3 Storages made with 18mm PLB with 2mm edge 1950 x 450 x 1200 HT No

4 No

5 No

Total

Acoustic treatment in both the rooms using rockwool, Perforated 12mm boards and wooden panelling upto the work station level.

Acoustic Partition wall with 2"x2" battons, Double Gypsum on both sides with rockwool filling

Rework the existing doors: Provide 'bottom chowkat' , Provide laminate on the door leaf, Provide heavy door closers, Providing handles, polishing the frame

Ceiling mountable CFL lights with 300mmx300mm frame, dual CFL bulbs and mounting arrangement

Lighting grid (1mtx1mt matrix with 40NB MS pipe with powder coating, roof hangers, and 16A socket boxes

Heavy Curtain Railings with I -profile rails and 50 nos of two wheel trollies to support the heavy curtain. (Curtain cost not included)

Cotton curtain cloth medium thickness suitably strictched and hanged from the curtain railing.

63mm thick tile based modular partition with a excluded Aluminums powder coated. Finish with 9mm pre laminated double skin partition with pinup/marker board fabric material. Table tops 1600 X750 and Table tops 1200 X600

Supply of Ceiling mountable CFL lights with 600mmx600mm frame, dual CFL bulbs and mounting arrangement (Bajaj)

4500 x 400 x 400 HT OVER HEAD STORAGE With M.S.Brackets support (Fixed above the work stations)

1200 x 400 x 400 HT OVER HEAD STORAGE With M.S.Brackets support (Fixed above the work stations)

Media Lab Works - MEC BOQ

Quantity Amount

0.00

#REF!

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.000.000.000.000.000.00

- - -

0.00

0.000.00

0.00

0.00

#REF!

SUMMARY OF BILLS OF QUANTITIES ( INTERIOR WORKS)

PARTICULARS

1.0 PARTITION AND PANELLING

2.0 FALSE CEILING

3.0 DOOR, WINDOW & GLAZING

4.0 PAINTING AND FINISHING

5.0 FLOORING AND CLADDING

6.0 MISCELLANEOUS

7.0 LOOSE FURNITURE

8.0 SIGNAGES

TOTAL

BIDDING DOC. No.:

BILL OF QUANTITIES (INTERIOR WORK)

ITEM DESCRIPTIONS

1.0 PARTITION AND PANELLING

1.1

1.1.1 Using Gypsteel (India Gypsum) / Lafarge or Equivalent make

Sr. No.

NAME OF WORK :- INTERIOR RENOVATION WORK WITH MEP WORK FOR MAHINDRA EDUCATIONAL INSTITUTE AT MSAT BAHADURPALLI CAMPUS HEDERABAD

ITEM NO.

Providing and fixing GI Frame work of 48 mm boxed studs (each box stud size - 0.55 mm thick, having one flange of 34mm and another flange of 36 mm) for vertical members and U-channels (0.55 mm thick, having equal flanges of 32 mm) for horizontal members placed at 610 mm centre to centre both ways with joints staggered to avoid through joints. The frame work is to be adequately anchored in ceiling and on floor having additional framework of rough wood treated with anti-termite and fire retardant paint at junctions of doors, windows.(Glazed/door area shall not be measured.)

1.1.2

1.2

1.3

1.3.1

1.4

1.5

1.5.1

1.6

1.7

Providing and doing aluminium framing in 50mmx25mm section of 1.2 mm thikness.Providing & fixing Acoustic insulation of 50mm thick Insulwool manufactured by U.P. Twiga Fiberglass Ltd.or approved equivalent make of 48 kg /m3 density, well compacted, wrapped in polythene sheet, fixed to partitions including cost of wire netting as required as per directions of Engineer-In-Charge.Providing and fixing 10mm thick clear glass in window with wooden frame OR in aluminium shall be fixed with wooden beading and sealed by application of approved non staining weather silicon sealant including necessary hardware and french polish on wooden beading etc complete as per drawing.(Wooden frame shall be measured separately) Providing and fixing 10mm thick TEMPERED clear glass in window with wooden frame OR FRAMELESS or in aluminium frame shall be fixed with wooden beading and sealed by application of approved non staining weather silicon sealant including necessary hardware and french polish on wooden beading etc complete as per drawing.(Wooden frame shall be measured separately)

Providing and fixing 12.5mm thick (Single layer) plain Gyp board cladding (confirming to IS -2095 - 1982 and 2543-1981) over G.I/ALuminium frame work fixed with dry wall screws of 25mm at 300mm centre, square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, paper tape and two coats of primer suitable for Gyp board. The external angles of the partition having Gyp board has to be protected by using angles, beads (25x25x0.5) and all exposed edges of Gypboard have to be protected edge bead 25x12.5x0.5). (GI frame work will be paid separately)

Providing and fixing 0.8mm thick laminate on both side of GI/Aluminium frame work in partitions (already fixed and paid separately) over 12thick commercial ply finished as per design given in drawing. All the edges of laminate should be jointed with 45 degree as per detail. The item includes cutting for electrical switches/ appliances, making grooves and desired shade and finish complete as per design and drawing.

Providing and fixing 0.8 mm thick laminate on both side of GI/Aluminium frame work in partitions over 12thick commercial ply (allready exist) finished as per design given in drawing. All the edges of laminate should be jointed with 45 degree as per detail. The item includes cutting for electrical switches/ appliances, making grooves and desired shade and finish complete as per design and drawing.

Providing and fixing 4mm thick veneer on both side of GI/Aluminium frame work in partitions (already fixed and paid separately) over 12mm thick marine ply finished as per design given in drawing. All the edges of veneer should be eased with maple wood, edges should be jointed with 45 degree and paper veneer at edges also as per detail. The item includes cutting for electrical switches/ appliances, making grooves and french polish in desired shade and finish complete as per design and drawing.

Providing and fixing 4mm thick veneer paneling in side for smart boards/ LCD nitch on wall, top and bottom of LCD nitch on GI frame work in partitions (already fixed and paid separately) over 12mm thick marine ply finished as per design given in drawing. All the edges of veneer should be eased with maple wood, edges should be jointed with 45 degree and paper veneer at edges also as per detail. The item includes cutting for electrical switches/ appliances, making grooves and french polish in desired shade and finish complete as per design and drawing.

1.8

1.9

1.10

1.11

1.12

1.13

1.13.1

1.14

1.15

Providing and fixing 6mm thk. LAQUERED glass writing board in paneling over 9mm+6mm thick marine ply board on GI frame work (already fixed and paid separately) fixed with 3M tape. The glazing shall be fixed in concealed aluminum channel with backer rod and non-staining clear silicone sealant complete as per design and drawing.(ONLY FOR THE FACULITY)Providing and fixing in position veneer paneling on window/glazing cills and facias as per detail. veneer paneling with 4mm thick veneer pasted over 19mm thick marine ply board including maple wood facia of size 50x20 mm and having approved adequate softwood frame work treated with anti-termite and fire retardant paint. The jobs shall include filling clear silicones with backer rod between glazing and cill top, french polish of approved colour and shade.etc. complete all as per design and drg.Providing and fixing 100mm high skirting finish with 4mm thick veneer over 12mm thick marine ply having 6mm thick maple wood lipped edges as per drawing including necessary hardware etc complete as per design and drg.

Providing and fixing 100mm high skirting in 0.8 mm thick laminate over 12 thick marine ply as per drawing including necessary hardware etc complete as per design and drg.

Providing and fixing machine cut designer 4mm thk MDF sheets on 12mm as per the paterns selected a proper jointing of two sheets to be done in order to maintain the patern. And finally finished with duco paint as per the approved colour.

Providing and fixing fabric paneling with approved, fabric wrapped with 6 mm thick synthetic foam over 12 mm thick tackable board of approved quality & make duly anchored to existing framework including necessary groove by using clip in CPVC profiles etc. complete all as per design and drawing.(Basic rate of fabric is Rs. 550/- per m for 1.2 m width)

Providing and fixing 12mm thk commercial ply on existing GI frame/AL frame finished with paint

P/F 100mm ht Al skirting on the wall comprising of corner clips screws etc as directed. Including of wall correctis to take skirting. Make : Jeb/ alloy/eqvivalentProviding and fixing 0.8 mm thick laminate on one side of GI/Aluminium frame work in partitions (already fixed and paid separately) over 12thick commercial ply finished as per design given in drawing. All the edges of laminate should be jointed with 45 degree as per detail. The item includes cutting for electrical switches/ appliances, making grooves and desired shade and finish complete as per design and drawing.

1.15.1

TOTAL2.0 FALSE CEILING

2.1

2.2

2.3

2.4

TOTAL3.0 DOOR, WINDOW & GLAZING

Providing and fixing 0.8 mm thick laminate on one side of GI/Aluminium frame work in partitions over 12thick commercial ply (Allready existing) finished as per design given in drawing. All the edges of laminate should be jointed with 45 degree as per detail. The item includes cutting for electrical switches/ appliances, making grooves and desired shade and finish complete as per design and drawing.

Note:*All cantilevered ceilings shall be supported with MS framework of appropriate thickness and size so that no sag is observed. *Covering of all the light fixtures with Gyp board or other material so that no light is observed from the grills/ opening above false ceiling.*Deduction shall be made for area more than 0.50 Sqm of light fixtures, diffuser, trap door etc.

Providing and fixing 12.5 mm thick Gypsum board false ceiling in horizontal/vertical and curved surfaces, coffers coves etc. fixed with screws to underside of GI suspension system comprising of G.I. angle of size 0.55 mm thick having one flange of 20mm and another flange of 30mm and a web of 27mm flanges along with perimeter of ceiling, screws fixed to brick/RCC /partition wall with the help of nylon sleeves and screws at 610 mm centers both sides. Then suspending GI intermediate channels of size 45mmx 0.9mm thick with two flanges 15mm each from the soffit at 1220mm centers with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I. cleat and steel expansion fastener. Ceiling section of 0.55 mm thickness having knurled web of 51.5 mm and two flanges of 26mm each with lips of 10.5mm are then fixed to intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm centre and Gyp Board fixed to the ceiling section with 25 mm dry wall screws at 230mm centers complete in all respect as per recommendations of India Gypsum Ltd. and approval including making and cutting for electrical / AC / fire fighting fixture and providing and fixing MS angle/tee/flat/ perforated edge bead for suspended ceiling and GI angle beads, edge beads wherever AC/Light fittings are to be installed, trap door in ceiling where directed and providing and fixing 8mm thick gyp board in cove, including preparation of surface. Item also include providing & making Cove lights per design and drawing.(actual finished surface area shall be measured and paid for) Using Gypsteel (India Gypsum)/lafarge make

Providing and fixing acoustical suspended ceiling system consisting tiles of sizes 600x600x16mm with NRC-0.9 of nominal size laid on hot dipped galvanized grid system with 15mm wide T-section flanges, main runners and double stitching cross runners of size 15x44x8mm thick to be interlocked between main runners at 600mm centers to be supported independently 600x600mm modules to be framed by fitting cross tees and perimeter wall angle 19x22x3000mm long.All exposed faces shall be powder coated color white. The frame shall be suspended with hangers of G.I. wire 4.0mm dia to be fixed by approved rawl plug, level adjusters and screws etc, all as per recommendations of manufacturer. Leveling should be done and checked by using laser gun method. The work includes provision for AC diffusers, grill, fire detection system /Light fixtures involving bearing section or support patress on back of tile etc. complete. The cutting of light fixtures, sprinklers to be in centre of tile. All the cut tiles required to be painted to match the colour of tile. The make are armstrong/amf

Providing and fixing in position pelmet of overall size 200mm x 200mm / 200mm x 250mm as per detail drawing. Base structure shall be made out of GI frame works used in gypboard ceiling. 19mm thick marine ply painted with plastic emulsion paint shall be fixed on it to receive blinds channel. The job shall include supports (GI/Al/Wooden Section) for adjacent wall/true ceiling/slab.

Providing and fixing in position trap door for services in gypsum ceiling. Size 600X600 (Lafarge/ Saint Gobain make)

3.1

3.2

3.2.1 Above specification of size 1000x2400

3.2.2

3.3

3.3.1 Above specification of size 1500x2400 mm (Double door)

3.3.2 Above specification of size 1200x2400 mm3.3.3 Above specification of size 1000x2100 mm

3.4

3.5 Above specification of size 1200x2400

3.6

3.6.1 Plain frosted film (sand blasted look)

3.6.2 Coloured gaphic film

Providing, making and fixing approved quality Hard Wood white cedar/steam beach/teak wood door frames, chemically treated, Kiln-seasoned, antitermite treated, shaped, grooved, mitered joint arrangement, moldings, rebates, including use of approved water repellent adhesive, GI screws, pins, etc. Frames shall be fixed with 3 nos. G.I. holdfast 225 x 20 x 4 mm with split end on either side and well grouted with cement concrete mix 1:2:4 (1 cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size) adjustable lugs with split end tail to each jamb, etc. Also to include french polish in desired shade finish and in approved colour on all exposed faces, surfaces of frame in contact with masonry / concrete surfaces shall be painted with one coat of bituminous paint of approved quality etc. complete to the entire satisfaction of the Engineer-in-charge.Providing and fixing Single leaf (2400mm height)12mm thick clear toughened glass door mounted on ozone/doorset make floor spring with hold open arm with Doorset make top & Bottom patch fittings, corner lock with strike plate & European profile Cylinder, ozone/doorset make handle 32 mm X 600 mm in Satin SS finished as per the approved sample etc. complete.

Above specification Double Door of size 1500x2400 (Single leaf 750mm or as per design)

Providing and fixing 48mm thick flush door shutter of approved manufacture both side commercial, finished with 1 mm laminated of approve make and shade fixed in pattern to both faces with maple wood lipping all around fixed with heavy duty ball bearing hinges 4mm thk of size 102mmx76mmx2.5mm (4 nos) as approved. The all hardware like lock, handle, door closer etc. shall be in SS finish as per hardware schedule and drawing of approved make including SS screws, door stopper Enviroseal etc from doorset/equivalent, french polish in desired shade finish etc complete as per detail drawing.Providing and fixing of Hollow metal fire door at all levels from ISO 9001-2000 certified Manufacturer. Fully flush type of 46 mm thick Pressed Galvanized steel conforming to IS 277, Single / Double leaf with 2 hour Fire rating(FD 2HR) confirming to IS 3614 of Shakti met-dor Ltd/ Navair make which consists of frame, shutter, infill and finish as detailed below: Door frame shall be double rebate profile of size 143 x 57 mm with bending radius of 1.4 mm having 1.60mm thick galvanized steel sheet (16 gauge). Steel door shutter of 46 mm thick fully flush, double skin door shall manufactured from 1.20 mm thick galvanized steel sheet (18 gauge). The stile edges to be lock seamed with no weld marks. The infill material shall be resin bonded honey comb Kraft paper with thermal insulation. Door frames and shutter shall be finished with primer coating, stoved zinc phosphate primer(35 micron DFT) and thermosetting Polyurethane aliphtic grade paint (35 micron DFT) of approved colour.

Providing and fixing 3M film plain/ coloured in pattern over glass etc. complete all as per drawing.(Actual film area shall be measured and paid for)

3.7

3.8

TOTAL4.0 PAINTING AND FINISHING

4.1

4.2

4.3

4.4

TOTAL

Providing, making and fixing at all heights 2 track aluminium sliding/regular door/ window in 16 guage anodizise aluminium/powder coated section ISI marked matching the existing aluminium finish with all accessories and hardware complete in all respect. The fixing to include the scafolding cost.

Rectification of all the damaged existing door/windows at all the heights including the hardware.

Providing and applying POP punning with minimum thickness of 6mm on wall and ceiling including finishing the surface smooth in line and level to the entire satisfaction of Engineer in charge including scaffolding/hacking of existing surface etc. complete as per directions of Engineer-in-charge. (At all heights & Levels) scaffolding to be provided by the contractor.Providing and applying OBD paint of approved colour/shade, brand & manufacture in two or more coat as required to get desired finish including preparing surfaces, filling up with gypsum or approved crack filler, binder; cleaning and making the surface dust-free, applying a sealer or primer coat of paint as recommended by approved paint manufacturer. Item also required scaffolding, cleaning and protecting till the handing over of site all complete to entire satisfaction of the Engineer-in-charge. (At all heights & Levels including the scaffolding)

Providing and applying Coloured texture paint to internal surface of walls as per manufacturer's specification and approved by Engineer in charge including a coat of approved primer to give an even shade including scaffolding etc. complete.(Basic installed Rate of textured Paint including all taxes, duties & cartage shall be Rs.125/- per Sqm). Works at all heights and leads. The basic rate shall be the final rate after application at site in position ( installed rate) of the paint manufacturer or authorized applicator. The variation above Rs 125/ Sqm. on the basic rate shall be reimbursed based on submission of documentary evidence. Providing and fixing fabric backing commercial grade wall paper of approved shade with recommended adhesive of approved make which have 100% washable, scratch resistance, peel proof, and fire retardant properties. Cost to include preparation on the punned surface for receiving the wall paper as per the manufacturer specification. Base rate Rs. 1100 /Sqm

Note: Contractor will provide several shades of samples of colour paint before execution as per the requirement of Engineer in charge.

5.0 FLOORING

5.1

5.1.1

5.1.2

5.1.3

5.2

5.2.1 Vitrified/ceramic tile (Basic rate of Tile Rs.500/- per Sqm)

5.3

5.4

Note:The basic rate of material shall be the landed cost of the Marble /Granite / Tiles for all sizes including cost of transport & sales tax etc. to be ascertained of based on documentary evidence.Any difference on the basic rate of material i.e. increase or decrease shall be considered for re-imbursement /refund with wastage of 15% for stone work and 2.5% for tile work of finished area. No overhead and profit shall be payable on account of this variation.Providing and laying approved quality, colour, design and shade 10mm thk fully homogeneous Vitrified tile confirming to EN 176 and water absorption less than 0.05% in floor, treads, landings, sills, thresholds, risers, skirtings, dado in pattern including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement about 2 kg/Sqm over cleaned surface and spreading neat cement paste using minimum cement about 4.5 kg/Sqm over cement mortar bed, joints to be cleaned and grouted with matching colour approved quality readymade grout, curing, cleaning, etc. to required line, level, etc. all complete at all leads, lifts and heights to the entire satisfaction of the Engineer-in-charge.

Vitrified tile in floor, wall, sills, thresholds,, treads over 20mm thick cement mortar in mix ratio 1:4 (1 cement : 4 coarse sand by volume);

Vitrified tile ((Basic rate of Tile Rs.500/- per Sqm) single soluble

Vitrified tile ((Basic rate of Tile Rs.1000/- per Sqm) double charge

Vitrified/Ceramic tiles in skirting, riser, dado and wall over 12mm thick cement mortar in mix ratio 1:3 (1 cement : 3 coarse sand by volume);

Providing and fixing 100mm high Vitrified tiles in skirting over 6mm thick marine ply fixed with suitable adhesive complete as per design and drg. (Basic rate of Tile Rs.500/- per Sqm)

Providing and laying (with Factor 4 glue)of Imported make, Optimum SD Type Nylon 6.6, Tufted Textured Loop Pile, antistatic carpet tiles of 17 to 20 oz/ sq.yd of size 500 x 500mm permanent static control, 100 % solution dyed, pile height 3.00mm to 4.00 mm and total thickness of 6.00mm to 7.00 mm with non-woven Glasbac backing with glass reinforcement, Life time antimicrobial treatment Intersept, stain resistant treatment Proekt. 15 years warrenty, CRI Green label plus certificate. complete over existing flooring as per Manufacturer's specification.The rate shall be inclusive of the Glasbac backing for entire area to be covered by carpet tiles complete. The rate shall be inclusive of providing and laying protective plastic sheets over the laid area of carpets till the area is fully handed over and application of vacuum cleaners before handing over and also water extraction cleaning for stained areas.(Basic rate of carpet including all taxes & transportation shall be Rs.968/- per Sqm)

5.4.1

5.4.2

5.5

Pattern : VeinedFlammability : B1 ClassSound Absorption : 3 dBSheet width/length : 180/16-25 cm/mOverall thickness : 2mmTotal wt : 2.9 kg/m2Colour fastness : 7 stageStatic electrical charge : 0.1 kvThermal resistence : 0.010 m2K/W

5.6

5.7

Above specification carpet to match existing in colour and quality

Providing and laying the PP carpet rolled type with and underlay of 6mm. The shade and colour to be approved y the client. The make are CCIL/UNITEX. The basic price is to be 750/-. No seperate wastage is to be given for the curved spaces.

Providing and laying of 2mm Antistatic vinyl rolls of colour and shade as indicated . The cost to include to prepare surface to receive vinyl flooring requirements like, the floor to be absolutely levelled, hard, dried, even and free from dirt, grease, moisture . The make of vinyl flooring shall be of Armstrong - Contour LG2 -or equivalent of which the specs have to be submitted for approval.BR 1500/sqmt

Conductive adhesive to be used and copper gridding to be used at every 3' 0" and then connected to the earthing at every 3.5 - 4 m2, which has to be connected with the building earthing. Armstrong DLW copper strips need to be used for the conductive floors.

Supplying and fixing of 10mm thk laminated wooden flooring. Tiles to be fixed on 6mm thk underlay. The floor should be cleaned before laying. Edges of tiles to be fixed with moulding of approved colour and design. To be fixed as per manufacturers specifications. Pergo / Armstrong , AC IV Grade, Basic rate Rs. 1100 / - Smt

Providing and laying granite stone as per the approved colour and sample on wall or floor with 1:2:4 cement mortar at all floors and heights. The basic rate of the granite is Rs 1800/- Sqm( The rates including making of any moulding/ groves in the stone as per the design)

5.8

TOTAL6.0 MISCELLANEOUS

6.1

6.2

6.3

6.4

Providing and laying 25mm polished kota stone as per the approved colour and sample on wall or floor with 1:2:4 cement mortar at all floors and heights. The Rate to include the final polihing after installation.( The rates including making of any moulding/ groves in the stone as per the design)

Providing, fabricating and fixing in position cabinet 600mm deep.The Box of the cabinet will be in 19mm thck comercial ply including the front shutter.The cabinet shall be consist of library kind of storage with glass in front shutters .The cabinet having adjustable shelves, shutter finished with laminate on external exposed surface and on inside surface of board. The item including 100mm high Laminate skirting, adjustable Glass shelves on S.S. pin, florescent light at the top of storage, Earl Behari hinges for storage shutter, knob, lock, handle as approved and french polish finish in desired shade complete in all respect as per drawing. (Elevation area shall be measured for payment) The make are unicos/v-3/BP Ergo/wipro

Providing, fabricating and fixing in position cabinet 600mm deep in Janitor closet/ and store area on different floors. The cabinet shall be made up of 19mm thick marine ply board finish 1mm thick laminate of approved shade on out side and black laminate of 1mm on in side. Shutter shall be made with 19mm thick marine ply finished with 1mm thick laminate of approved shade on outside and inside. The cabinet having shelves, shutter as per drawing. The item including 100mm high Laminate skirting, maple wood lipping on all the exposed edge of board, Earl Behari hinges for storage shutter, knob, lock, handle as approved and french polish finish in desired shade complete in all respect as per drawing. (Elevation area shell be measured for payment) custom made.

Providing and constructing low height storage of width 450mm and size as per drawings, with top, sides and bottom in 19 mm thick prelaminated Board with additional board of 19 mm thick Prelaminated/Post laminated board, back in 8mm thick commercial ply, intermediates in 19 mm thick commercial ply, shutter in 19 mm thick Prelaminated ply. All external surfaces to be finished in approved laminate, with balancing laminate on the interior surface. All exposed edges to be finished in approved PVC edge binding. Rate to include hardware such as approved locks, auto closing hinges for shutters, approved handles, door stop, tower bolt, etc. complete. Hardware Hettich & equivalent.The make are unicos/v-3/BP Ergo/wipro

Providing and constructing full height storage of width 375-600mm and size as per drawings, with top, sides and bottom in 19 mm thick commercial ply, back in 8mm thick commercial ply, intermediates in 19 mm thick commercial ply, shutter hollow core with framework as per drawings in 19 mm thick commercial ply, with 4mm thick commercial ply panel. All external surfaces to be finished in approved laminate, with balancing laminate on the interior surface. All exposed edges to be finished in approved PVC edge binding. Rate to include hardware such as approved locks, auto closing hinges for shutters, approved handles, door stop, tower bolt, etc. complete.

6.4.1

6.4.2

6.5

6.6

6.7

6.8

6.8

6.8.1

6.8.1

Providing and fixing pigeon hole storage with size of each pigeon hole as 300x300x400mm with top, sides made from 19 mm thick prelaminated ply. back to be made from 8 mm thick commercial ply. Intermediates (Horizontal and vertical) in 12 mm thick commercial ply. All exposed edges to be finished in approved PVC edge binding. All exposed surfaces to be finished in approved laminate with balancing laminate on the internal surface.Providing and fixing DB shutters with top, sides in 19mm thick commercial plywood, back in 8mm thick commercial plywood and finished in approved 1mm thick laminate from all exposed sides and 0.8mm thick balancing laminate on the under side. The shutters to be in 25mm thick commercial grade block board finished in approved shade 1mm thick laminate on exposed surface and balancing laminate on the interior surface with approved beading and framework in seasoned teak wood of section 50mmX50mm, approved handle, tower bolts, Locks, magnetic ball-catch etc complete as directed. Each shutter shall have one grill at the bottom and one at the top.

Providing, fabricating and fixing in position cabinet of various heights and 400mm deep.The Box of the cabinet will be in 19mm thck comercial ply including the front shutter glass.The cabinet shall be consist of library kind of storage with glass in front shutters .The cabinet having adjustable shelves, shutter finished with laminate on external exposed surface and on inside surface of board. The item including 100mm high Laminate skirting, adjustable Glass shelves on S.S. pin, florescent light at the top of storage, Earl Behari hinges for storage shutter, knob, lock, handle as approved and french polish finish in desired shade complete in all respect as per drawing. (Elevation area shall be measured for payment) The make are unicos/v-3/BP Ergo/wiproProviding and making notice boards (fabric) in Ply/board finished with laminate and the front shutter to be openable glass. Custom made

Providing , fabricating and fixing SS railing of grade 304 brushed finish make ozone/ carl-f/jav as per approved design. The height of the railing is to be 1M. The base price is to 7500/-

Providing, fabricating and making MS railing as per the design. The MS to be finished with enamel paint and top rail to be finished with PVC tape.

Providng and pasting 2" 3mm antiskid tape on the floor

Providing and fixing muliti layered with and vertical/horizontal sliding ceramic/magnetic/glass white boards as per the size in drawings.

Providing and fixing ceramic/magnetic/green white boards as per the size in drawings.

6.9 Blinds

6.9.1

Roller Blind with perforated Screen Fabric

6.9.2 Roller Blind with Black out Screen Fabric

TECHNICAL SPECIFICATIONS- PERFORATED BLIND

Composition : 30% Polyester, 70% PVCOpenness factor : 5 %Thickness : .53 5% mm�Color fastness to Light : Grade 8Anti- Ultraviolet : 95% Weight : 380 G/SqM 5% �Fire Classification : USA NFPA 701/BS 5867Cleaning Instructions : WashableIndoor Air Quality : Green Guard Certified

TECHNICAL SPECIFICATIONS- BLACK OUT BLIND Composition : 100% fiberglassFabric thickness : .51 mmOpenness factor : opaqueFire classification : NFPA-701-1999Standard widths : 183 cm Mesh weight : 407 g/sqmCleaning instructions : washable

6.1

6.10.1 Up to 175mm thick finished wall

6.10.2 Above 175mm thick finished wall

6.10.3 Demolishing existing wooden/glass partition

6.10.4

6.10.5 Removal of existing Screeding

6.10.6

Providing and fixing Roller Blind supported with roller tube made of extruded aluminum alloys duly approved powder coated colour. Roller tube is fixed with steel powder coated bracket on either side. The clutch is fixed to roller tube made of wrap spring design with high strength fiber glass reinforced polyester and high carbon steel springs to transmit motion. Clutch shall be operated with the use of an endless beading chain which is manually operated etc complete as per specification.

Demolishing existing masonry work for following thickness inclusive of RCC Lintels etc., cutting reinforcement bars, stacking of serviceable materials as directed and carting away, spreading and levelling materials outside Owner's premises including all labour, tools etc complete for all locations and levels as directed and instructed by Architect. Note:- No extra payment to be made for removing plaster works from the demolished masonry.

Demolition of the existing kota stone works and carrying the debris away from site as per architects instructions

Removal of existing Writing board ,white board / Fabric board

6.10.7 Removal of existing Wooden /glazed partition with doors

6.10.8 Removal of existing Carpet

6.10.9 Removal of existing Ceiling - Gypsum/Grid ceiling

Removal of existing Wooden Doors - single leaf door

Removing & Refixing of existing Wooden Doors

Removing of the existing ducting inceiling.

6.11

6.12

6.12.1

6.12.2

6.13

6.14

6.10.10

6.10.11

6.10.12

Removing the panlling in the existing column for vertical drops

6.10.13

Removing of existing floor/wall tiles and clearing of the debris.

115mm thk Brick masonry work with 1st class bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) with 2 nos. 6mm dia M.S. bars at every 4th coarse of masonry including racking the joints and curing etc. complete.Nothing extra shall be payable for rectangular, square, curved or champhered.AAC Blockwork - Providing and constructing of Autoclaved Aerated Concrete (AAC) blocks having dimensions of 625mm x 200mm. Manufactured using Fly-ash predominantly and conforming cement mortar composition of 1:4 (1 Cement : 4 sand) with suitable plasticiser. Composite mortar having proportion of 1:1.25:5 (1 cement : 1.25 fly ash : 5 sand) can also be used. Sand having modulus of fineness 1.1 shall be used. The horizontal and vertical joint thickness should be 10mm. Masonry work stictly be carried out as per BIS 1905-1987 etc. complete.Providing and doing 12-15mm thk cement plaster on the walls with an ratio of 1:6 at all hights and lvl.

230mm thk Brick masonry work with 1st class bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) including racking the joints and curing etc. complete.Nothing extra shall be payable for rectangular, square, curved or champhered.

Providing and applying, gypsum plaster (gyproc) on internal surfaces of RCC / brick/block walls in line and levels to give a smooth finish. Rate shall include for scaffolding , grooves, sills, pattas, surface preparation before the application of gyproc plaster, . The contractor shall make good the grooves, pockets etc. after the scaffolding is removed.

6.15

6.16

6.17

6.18 MAKING OPENING IN WALLS

6.19

6.20

Providing,50mm machine mixing and laying cement concrete screed in approved panels in cement concrete mix of 1:2:4 (1 cement :2 sand :4 aggregate 12.5 mm) well vibrated, compacted, including preparing the subbase, laying neat cement slurry @ 1.75 Kg of cement per Sqm over subbase to received base course and finished smooth / brush finished ready to receive floor finish on top and cured by keeping surfaces well covered and protected against excesses of any type, all complete including compacting, tamping, providing shuttering to edges, rounding off edges and strips etc. at all heights and leads to the satisfaction of the Engineer-in-charge

Providing and fixing 600mm wide hand wash counter with top in approved sample pre-polished granite slab 20mm thick laid on 19mm thick marine ply backing / rcc slab supported on MS brackets fixed to wall by anchor fasteners as directed. MS brackets to be finished in approved enamel paint, Providing 230mm high front facia and band 200mm high above the counter in same shade granite. All exposed surfaces of platform to be finished in same granite slab. Necessary cut-outs for sink to be provided and all cut-outs, exposed edges to be bull nosed with mirror polish. Cost to also include making necessary cut-outs for taking pipes through counter top. Cost of Polished Granite Rs.2000/sqm. Counter top to be measured and paid for

Providing,100-150mm machine mixing and laying cement concrete screed in approved panels in cement concrete mix of 1:2:4 (1 cement :2 sand :4 aggregate 12.5 mm) well vibrated, compacted, including preparing the subbase, laying neat cement slurry @ 1.75 Kg of cement per Sqm over subbase to received base course and finished smooth / brush finished ready to receive floor finish on top and cured by keeping surfaces well covered and protected against excesses of any type, all complete including compacting, tamping, providing shuttering to edges, rounding off edges and strips etc. at all heights and leads to the satisfaction of the Engineer-in-charge

Making openings in walls for AC ducting etc. without damaging the surroundings and making good the affected areas with smooth plaster in mix proportion 1:4, inclusive of lintel support in Cuddapah stone of thickness 25mm to be provided where ever required. Cost to be inclusive of filling the excess opening with brick bats and finishing the same in smooth plaster in cement mortar 1:4, proper curing, giving supports to walls etc complete.

Providing and doing 50mm thermocole insuation on the second floor ceiling with the 75mm secrews

Providing and making 400 sqmtr of work shop including all the civil work from foundation to finishing and fabrication work in cluding the ISMB work and corogated galvanised powder coated sheet as per the attached sepcification.

6.21

6.22

TOTAL

7.00 LOOSE FURNITURE

7.10

7.20

7.2.1

7.30

7.40

7.50

Casting of RCC slab 150mm, The concrete mix is to M-25. at all height and lvl. The cost should also including the shuttering required.

Providing and binding the reinforced steel for the roof casting at all the levels. The steel to be of TATA/Sail/Jindal/rathi

Providing and fixing single seater sofas / Lounge Chairs with TW under structure, brushed SS leg support finished in high density moulded foam and composite leather upholstery as per attached image etc. complete. Rs. BR 10,000 per seat

Providing and fixing double seater sofas with TW under structure, brushed SS leg support finished in high density moulded foam and composite leather upholstery as per attached image etc. complete. Basic rate for upholstery Rs. 600/- per Rmt.

Providing and placing chrome finish multi seating arrangement.

Providing and fixing Three seater sofas with TW under structure, brushed SS leg support finished in high density moulded foam and composite leather upholstery as per attached image etc. complete. Rs. BR 10,000 per seat

Providing and constructing Centre tables 900mm dia as per the details given below with table top in 10mm thick fused toughened glass of Saint Gobain make, with tubular or box supports in Brushed Stainless Steel Finish ( 316 grade ) average 25mm dia, 1mm thick, complete as directed.

Providing and constructing Side tables of size 450 mm x 450 mm x 450 mm and shapes as per the details given below with table top in 10mm thick fused toughened glass of Saint Gobain make, with tubular or box supports in Brushed Stainless Steel Finish ( 316 grade ) average 25mm dia, 1mm thick, complete as directed.

7.60

7.70

7.80

7.90

7.10

7.10.1

7.10.2

7.11

7.12

a) 12 Seaterb) 8 Seaterc) 4/6 Seater

7.13 Supplying chairs matching existing

a)

b)

c)

Providing and fixing bed in medical room with TW under structure, brushed SS leg support finished in high density moulded foam and composite upholstery as per attached image etc. complete with mattress.

PROVIDING AND FIXING main table,side table and the back storage for the cabins in pre laminated boards

PROVIDING AND PLACING the lecture/tutorial chairs as per the design of wipro/bp ergo/v3/unicos. The basic rate of the chair is Rs 3200/-

Providing and refixing/replacing the students table matching the existing design wipro/BP Ergo/v3/unicos

Providing and making modular workstation of size 1500x1500x1200 with 60mm thixk partition as per design of BP Ergo/unicos/v3/wipro

Providing and making modular workstation of size 1200x600x1200 with 60mm thick partition as per design of BP Ergo/unicos/v3/wipro

Providing and placing metal storage for the library. The storage will be from CRCA metal sheet powder coated as per the approved colour shade. The size of the cabinet will 1mx0.45mx1.8m. The front shutter will be of glass with lockable mechanism.The storage cabinet will be from Godrej/v-3/wipro/unicos

Providing and placing the lecturer desk for the lecturer rooms of standard size as per the layout make BP Ergo/unicos/v3/wipro

Providing and placing meeting tables in pre laminated boards as per the design and shade of BPErgo/v3/unicos/wipro

Low back witn all ficility like height adjustment, seat back edjestment etcMedium back witn all ficility like height adjustment, seat back edjestment etcHigh back witn all ficility like height adjustment, seat back edjestment etc

7.13.1

7.13.2

7.13.3

7.13.4

7.13.5

7.14

7.15

7.16 LAB FURNITURE

a)

b)

c)

Providing and placing tables for the library and other spaces in laminate top and metal base. The sizes of the tables will be as per the layout with different/same size. The basic price per seat is Rs 3500/-. And the make will be BP/ Ergo/unicos/v3/wipro

Providing and placing library chairs in metal base and hard fininsh of BP/ Ergo/unicos. The base price for the chair would be Rs 2800/-

Providing and Placing the library counter in laminate finish. The size of the counter is 1800x1200x1125mm. The counter will be in two lvls.

Providing and Placing the news paper and mazgine rack in wood/aluminium

Providing and making internet kiosk in laminated boards as per the design and approved laminate.

Providing and placing cafeteria furniture tables in cluding the chairs

Providing and making curved furniture benches with tables made in laminated board and metal frame work in the seminar room and lecture room as per the drawing and size. The becnhes will be finished with laminates.The furniture to be from BP Ergo/v-3/unicos. The base price for the desk is 6000/- per seat

laminated tables with granite top 600-750 mm wode and crca metal frame of BPErgo/unicos/wipro. It should have the provision for fixing the data and power point. It should have the provision for fixing all/any laboratory gadgets as per the requirement of the lab and SS sink. Basic rate 9500

Laminated desk seating with metal frame work with storage of BPErgo/unicos/v3/wipro( basic rate 7000 per seat with desk). It should also have a provision of fixing the data and electrical points.

Storage cabinet for the lab area with openable glass shutters of BPErgoi/unicos/v3/wipro

d)

e)

f)

g)

h)

i)

TOTAL

8.00 SIGNAGE8.10 MONOLITH SIGN

Painted Aluminium Freestanding signage with Vinyl Graphics in size 72" x 23". Base Plate 29" x 15".

8.20 SERVICE AREA DOOR SIGNAGE8 mm Painted Acrylic sheet in size 7" x 7"fixed directly on wall using 3M double side tape.

8.30 ROOM NAME WALL SIGNAGE8 mm Painted Acrylic sheet in size 7" x 7"fixed directly on wall using 3M double side tape.Provision for inserting Name.

8.40 STATION NAME PLATES8 mm Painted Acrylic sheet in size 11" x 3"fixed directly using 3M double side tape.Screen Printed Graphics.

8.50 EXIT SIGNAGE - SINGLE SIDED3mm Clear Acrylic with Photoluminiscent filmand Vinyl Graphics in size 10.25" x 10.25".

8.60 EXIT SIGNAGE - DOUBLE SIDED

Providing and placing the slotted angle storage of godrej make with a loading capacity of 1000kg per sqmt.

Providing and placing of lab asistant table with a storage in laminate finish of size 750mmx1500mm main table. The side table is 450mmx 900mm cum storage. BPErgoi/unicos/v3/wipro

Providing and fixing Fume hood in different lab.

Providing and fixing spot extractor on the tables. Basic rate 100000/-

Providing and fixing of floor mounted saftey station. Basic rate 80000/-

Providing and fixing/placing safety storages in MS/prelaminated boards with glass shutters of BPErgoi/unicos/v3/wipro

3mm Clear Acrylic with Photoluminiscent filmand Vinyl Graphics in size 24" x 6".

8.70

TOTAL

BIDDING DOC. No.:

BILL OF QUANTITIES ( PLUMBING FIXTURES WORK)

DESCRIPTION

A. SUPPLYING SANITARY FIXTURES B. FIRE FIGHTING ( SUPRESSION+DETECTION+PA)

GRAND TOTAL

Building ID Sign Made of Aluminum Side returns with acrylic fascia and LED Illuminated. 29 Letters

(B)INTERNAL PLUMBING FIXTURES AND FIRE

DETECTION AND FIGHTING WORKS

NAME OF WORK :- INTERIOR RENOVATION WORK WITH MEP WORK FOR MAHINDRA EDUCATIONAL INSTITUTE AT MSAT BAHADURPALLI CAMPUS HEDERABAD

ITEM NO.

ITEM DESCRIPTIONS (PLUMBING)

1

2

3

4

5

NOTE: All sanitary & plumbing fixtures/fittings in this head shall be handed over in good conditions complete with the accessories for fixing to the other contractor of owner.

ITEM NO.

Supplying and stacking of Wall Hung W.C. includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - HINDWARE/PARRYWARE BASIC MODEL

Supplying and stacking of Urinal without in built Sensor Flushing Sensor will be separate on top of the urinal includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - HINDWARE/PARRYWARE BASIC MODEL

Supplying and stacking of Health faucet in chrome finish with flexible chain with spray head and wall hook includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - JAQUAR :ALD-573GB

Supplying and stacking of Wash basin (under counter sink) includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - HINDWARE/PARRYWARE BASIC MODEL

Supplying and stacking of Sensor faucet for wash basinsincludes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - JAQUAR sensotronic sensor faucet for wash basin Code – snr-51027Chrome Finish  

6

7

8

9

10

11

12

Supplying and stacking of sanitory fixture and fitting Matrix comes with complete set for Paraplegic set along with WC,Wash Basin ,Hinge rails and grab rails in handicap toilet includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - HINDWARE- 10060Supplying and stacking of Concealed cisterns (Slim concealed Cistern body flushed in wall) includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - JAQUAR : BASIC MODEL

Supplying and stacking of Flush valves ( Dual flow flush valve in Matt Finish) includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - JAQUAR : BASIC MODEL

Supplying and stacking of Hand Drier includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor.

Supplying and stacking of Toilet Paper holder with flapincludes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - JAQUAR: ACN-1153N

Supplying and stacking of Soap Dispenser Counter mounted includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor.

Supplying and stacking of Bath spout includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor.Make - JAQUAR :SPJ-5429

13

14

15

16

17

18

a) 15mmb) 25mmc) 30mmd) 40mme) 50mm

Supplying and stacking of Divertor includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - JAQUAR : BASIC MODEL

Supplying and stacking of Single level basin mixer Single Line basin for Hot & Cold Waterincludes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - JAQUAR :FLORANTINE COLLECTION

Supplying and stacking of Soap Dispenser includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - Euronics

Supplying and stacking of Towel rack with down hanger includes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - JAQUAR: 1581

Supplying and stacking of Single lever FaucetSingle Level paser Mirror for Hote & Cold Waterincludes transportation, loading/unloading and storage at site as direction by Engineer in-charge. All fixture and fitting shall be made conforming to relevant standards. Storage space by owners & safe custody by contractor. Make - JAQUAR: -OPAL SERIESOPL-15011B

Providing and doing GI piping for cold and HOT water supply Class -B including all the accessories

22 Providing and doing PVC pipes with all the accessories a) 50mmb) 100mmc) 150mm

23 Providing and making Floor trap and gully trap

24 Providing and making mail holes

25

Total

ITEM DESCRIPTIONS (FIRE FIGHTING)

1

a 25 mm diab 32 mm diac 40 mm diad 50 mm diae 65 mm diaf 80 mm diag 100 mm diah 150mmd dia

2

3

a 1.0m lengthb 1.5m length

Providing and fixing of laboratory sink for the labs as per the requirement and design of size 600 mm long

ITEM NO. Providing and fixing MS Pipe IS:1239 (Heavy Class) marked

including all forged fittings and accessories such as screwed / welded flanges, tees, reducers etc. complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required of the following pipes painted with one coat of primer & two coats of post office red enamel paint fixed in ceiling, walls, coloumns for all heights with hangers, supports and fasteners all as per drawing including chasing of walls/columns/ceilings etc. and making good the same complete as required.

Providing, fixing, testing & commissioning of pendent type sprinkler heads (UL listed)-Quick response. HD Fire Make

Providing and fixing SS flexible connection of 200 psi rating for sprinkler heads from branch lines complete with nipple and nut, SS flexible pipe, gasket & wing clamp etc. Flexible pipe shall be UL listed. HD Fire make

4

a Capacity 5.0kg. I.S.I. Marked. Minimax/cease fire

5

a Capacity 4.5 kg. I.S.I. Marked. Minimax/cease fire

6 Providing and fixing of reducers of various sizes

TOTAL

FIRE ALARM SYSTEM (FIRE DETECTION)

1

b 32 mm dia

c 40 mm dia

d 50 mm dia

2

Providing and fixing ABC type fire extinguishers consisting of welded MS cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to ISI finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal dischargetube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge.

Supply, Installation, Testing & Commissioning of Microprocessor based intelligent, addressable, modular networkable, 2 loops capacity for detector and devices (each loop shall have minimum 99 addresses), fire alarm control panel with 1/4 VGA display / LCD display /320 Character with soft keys for displaying alarm, events and operating functions, Compatible with graphic user interface to pin point the identification of the fire location and fire alarm system control, (latest edition of en54 approved)

Supply, Installation, Testing & Commissioning of Network Repeater Panel with minimum 320-characters; The LCD shall Display all events / detectors, devices status of complete systems in the network, The NRP shall be equipped with Keypad. Provision for mounting annunciator box and blanking modules shall be providedin the NRP. Complete with battery, battery charger and other accessories as per Main Fire Alarm Panel such as Fibre Optics Network Cards etc as required and as per specifications .

3

4

5

6

7

8

9

Supply, Installation, Testing & Commissioning of Intelligent addressable optical smoke sensors with base etc as per specification as required.(Latest Edition/EN54/VDS Approved)

Supply, Installation, Testing and Commissioning of Multi Cooperative Sensing Type Analog addressable Laser Type detector/OT blue (Detector with blue LED) with inbuilt isolator or with isolator in base with mounting based LED, with base etc as per specification as required.(UL's Latest Edition/EN54/VDS Approved make seimens/honleywell morley/Edward etc

Supply, Installation, Testing and Commissioning of isolator for the checking of fire alarm system, etc as per specification as required.( Latest Edition/EN54/VDS Approved make seimens/honleywell morley/Edward etc

Supplying, assembling, erection, testing & commissioning of Response Indicator which consists of steady glowing LED. This LED shall be mounted within a M.S. box and connected in parallel to the built in indicator of the detector as per specifications. The RI shall come "ON" as soon as the detector activates complete in all respects as per specification.

Supply, Installation, Testing & Commissioning of addressable Control Module for tripping of AHU, Fire Damper etc. including all relays, contacts etc. complete as required.(Latest Edition/EN54/VDS Approved make seimens/honleywell morley/Edward etc

Supply, Installation, Testing & Commissioning of addressable Monitor Module for sprinkler flow switch, Aaspiration System etc. complete as required. Latest Edition/EN54/VDS Approved make seimens/honleywell morley/Edward etc

Supply, Installation, Testing & Commissioning of Intelligent addressable Manual Call Point with inbuilt isolator or isolator before and after, break glass type with alarm LED as detailed complete as required. ( Latest Edition/EN54/VDS Approvedmake seimens/honleywell morley/Edward etc

10

11 2 x 1.5 sqmm FRLS Copper

12

a 20mm dia.

TOTAL

PUBLIC ADDRESS SYSTEM

1

2

3

4

Supply, Installation, Testing and Commissioning of Sounders with 20 hz to 20 khz operating complete as required. ( Latest Edition/EN54/VDS Approved make seimens/honleywell morley/Edward etc

Supplying and fixing of following sizes of MS conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, Installation, Testing & Commissioning of Digital Voice Evacuation system including panels, other hardwares & softwares-capable of supervision of all circuits and 2 way Communication Fire Fighters Telephone System including panels, other hardwares & softwares-capable of supervision of all circuits. The Digital Voice Evacuation system capable of taking upto 2 zones to be with required suitable amplifiers and hardwares like MIC, racks etc. for 50 nos speakers (as mentioned in this tender) and accessories required to complete the systems. Both systems to be integrated with each other (Fire Detection & Public address System). MAKE BOSCH

Supply, Installation, Testing and Commissioning of Fire panel supervised 70db-84db Ceiling Mounted Speakers Cum Hooter complete with ceiling arrangements and all accessories etc.MAKE BOSCH

Supply, Installation, Testing and Commissioning of Fire panel supervised 70dB-84dB Wall Mounted Speakers Cum Hooter complete with wall mounting arrangement and all accessories etc.MAKE BOSCH

Supply, Installation, Testing and Commissioning of 2 way communication Fire Fighter's Telephone Jack fitted on wall including the cast of breaking and making good the wall wherever required.MAKE BOSCH

5

6

7

TOTAL

BIDDING DOC. No.:

Supply, Installation, Testing and Commissioning of 2 way communication Fire Fighter's Handset complete with all accessories.MAKE BOSCH

Supplying, Installing, Testing and Commissioning of addressable Control Module for Fire Fighters Telephone circuit complete.

Supplying, laying, terminating & connecting of 2 core 24/0.20 sq.mm flexible copper conductor cable with terminations, labour and other petty material etc. complete in all respect.

(C)INTERNAL

ELECTRICAL WORKS

NAME OF WORK :- INTERIOR RENOVATION WORK WITH MEP WORK FOR MAHINDRA EDUCATIONAL INSTITUTE AT MSAT BAHADURPALLI CAMPUS HEDERABAD

BILL OF QUANTITIES ( INTERNAL ELECTRICAL WORK)

DESCRIPTION

A. CIRCUIT CUM POINT WIRING (SUPPLY, INSTALLATION, TESTING AND COMMISSIONING)B. CABLES, MAINS AND SUB MAINS C. CABLE TRAYS , RACEWAY & JUNCTION BOXES :D. DISTRIBUTION PANEL AND FINAL DISTRIBUTION BOARDE. EARTHING INSTALLATION (FOR DISTRIBUTION SYSTEMS, UPS, SERVER & EPABX ETC.)F. SUPPLY & INSTALLATION OF LIGHTING FIXTURES G. CONDUITING, WIRING & CABLING FOR MATV SYSTEMH. CONDUITING, WIRING & CABLING FOR TELEPHONE SYSTEMI. ACCESS CONTROL & CCTV SYSTEM

GRAND TOTAL

SCHEDULE OF QUANTITIES

GENERAL NOTES

1

2

3

4 All equipment and material shall be IS approved.

5 All approvals shall be obtained from Owner's site representative / Consultant / Project Manager

6

7

8

ITEM DESCRIPTIONS

A.

1

ITEM NO.

quantity of work executed as measured at the site at the rates tendered. The Client reserves the right to increase or decrease any of the quantities, or to ommit totally any item of work. Any All the items of work given in this schedule of quantities shall be executed strictly in accordance with the latest Indian Standard Specifications and the requirements of the Electricity Supply Authority read in conjunction with the relevant drawings and Specifications.work is to be performed. He shall also check and ascertain the location of any existing structure or equipment or any other situation which may affect the work. No extra claim as a

All equipment and material shall be inspected at manufacturer’s works as per relevant IS by the Client or his representative before despatch to site.

All vendor drawings shall be approved by the Owner's site representative / Consultant / Project Manager before fabrication work starts.All Testing and Commissioning shall be as per relevant IS for equipment and IS:732:1989 for the installation. All testing records are to be maintained and submitted for Owner's site representative.ITEM

NO.

CIRCUIT CUM POINT WIRING (SUPPLY, INSTALLATION, TESTING AND COMMISSIONING)Wiring for the following light points with 1.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires of approved make in concealed or surface mounted 25 mm dia 16 gauge MS Conduit including providing and fixing of 6 amps single pole modular switch of approved quality colour make & design in 1.6 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.(including circuit wiring from DB to switch Board)

1.1 Primary point controlled by one 6 Amps switch.

1.2

2

2.1 Primary point controlled by one MCB.

2.2

3

3.1

3.2

4

4.1 Primary point for 6/16 amps switch socket outlet

4.2

5

Same as item no. 1 above but Secondary point (Controllling switch is included in item no. 1)

Wiring for light point as in item No. 1 above but controlled by SPMCB provided in the DB. (Cost of MCB not to be included here).

Same as above but Secondary point wherever required as per drawing, i.e. Points to be looped with Primary point.

Wiring for light point as in item No. 1 above, through motion cum presence sensor controlled by SPMCB provided in the DB. (Cost of MCB not to be included here.)

Primary point controlled by one presence sensor wherever required as per drawing. (Cost of MCB not to be included here.)

Same as above but Secondary point wherever required as per drawing, i.e. Points to be looped with Primary point.Wiring for 250 volts single phase and neutral 6/16 amps modular switch socket outlet with universal pins with 3x4 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible "FRLS" wire in concealed or surface mounted 25 mm dia 16 gauge MS conduit / existing raceway including providing and fixing of 6/16 amps 6 pin modular switched sockets of approved make and design in 1.6 mm thick GI box with grid plates and earthing the third pin of each socket outlet with 4 Sq mm PVC insulated copper conductor stranded flexible "FRLS" wire (2 nos. socket outlet shall be looped on one circuit).

Same as above but secondary point looped with primary point with 16 amps switch socket outletWiring for 250 volts single phase and neutral a set of 1 No. 6 Amps 3 pin combined switch socket outlet with 2.5 sq.mm. PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wire in surface / concealed 25 mm dia 16 guage MS Conduit including providing and fixing of 1 No. 6 Amps 3 pin switch socket outlet of approved make and design in 1.6 mm thick GI boxes with grid plate and earthing of third pin of the sockets and GI box with 2.5 sq mm. PVC insulated copper conductor stranded flexible FRLS wire (Maximum of 5 set of 6 Amps socket shall be connected on one circuit), complete in all respect.

5.1

5.2

6

6.1

6.2

7

7.1

7.2

8

Wiring Details for Hub Rooms / Server Room

Phase conductor connected to Pole 1

Primary points with a set of 1 No. 6 amps socket outlet controlled by one No. 6 Amps switch.

Same as above but secondary point looped with primary point (1 No. 6 amps socket outlet controlled by one No. 6 Amps switch).Wiring for 250 volts single phase and neutral a set of 2 Nos. 6 Amps 3 pin combined switch socket outlet with 3 core 2.5 sq.mm. PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wire in existing surface / concealed 25 mm dia 16 guage MS Conduit / raceway including providing and fixing of 2 No. 6 Amps 3 pin switch socket outlet of approved make and design in 1.6 mm thick GI boxes with grid plate and earthing of third pin of the sockets and GI box with 2.5 sq mm. PVC insulated copper conductor stranded flexible FRLS wire (Maximum of 3 set of 6 Amps socket shall be connected on one circuit), complete in all respect.Primary points with a set of 2 No. 6 amps socket outlet controlled by one No. 6 Amps switch.

Same as above but secondary point looped with primary point (2 No. 6 amps socket outlet controlled by one No. 6 Amps switch).Wiring for 250 volts single phase and neutral a set of 3 Nos. 6 Amps 3 pin combined switch socket outlet with 3 core 2.5 sq.mm. PVC insulated copper conductor 1100 volts grade stranded flexible FRlS cable in existing surface / concealed 25 mm dia 16 guage MS Conduit / raceway including providing and fixing of 3 Nos. 6 Amps 3 pin socket outlet controlled by one 16 Amps switch of approved make and design in 1.6 mm thick GI boxes with grid plate and earthing of third pin of the sockets and GI box with 2.5 sq mm. PVC insulated copper conductor stranded flexible FRlS cable (Maximum of 3 set of 6 Amps socket shall be connected on one circuit), complete in all respect.Primary points with a set of 3 No. 6 amps socket outlet controlled by one No. 6 Amps switch.

Same as above but secondary point looped with primary point (3 Nos. 6 amps switched socket outlet controlled by one No. 6 Amps switch).

Wiring for 32Amp 250volt, 3pole plug with socket or Equivalent mounted beneath the cabinets within the false floor with 3 runs of single core 6 sq.mm PVC sheathed copper conductor 1100 volts grade ZHFR cables in existing cable tray including providing and fixing of 32Amp 250volt, 3pole plug and socket and 32 Amps DP MCB or Equivalent of approved make and design in 2 mm thick GI box with grid plates.

8

Neutral conductor connected to Pole 2

9

10

10.1

10.2

11

11.1 20 mm dia MS conduit

11.2 25 mm dia MS conduit

11.3 32 mm dia MS conduit

Wiring for Exhaust fan point with 1.5 sq. mm. insulated copper conductor 1100 volts grade stranded flexible "FRLS" wires of approved make in concealed or surface mounted 25 mm dia 16 guage MS Conduit including providing and fixing of 6 amps flush mounted switch at the normal switch level in 1.6 mm thick GI box and 6 amps 3 pin flush mounted socket near exhaust fan and earthing of exhaust fan through the third pin of the socket outlet and GI box with 1.5 sq. mm. PVC insulated copper conductor flexible "FRLS " wire.Wiring for 250 volts single phase and neutral a set of EGA floor mounted box with 3 core 2.5 sq.mm. PVC insulated copper conductor 1100 volts grade stranded flexible FRLS cable in existing surface / concealed 25 mm dia 16 guage MS Conduit / raceway including providing & fixing of following EGA floor box of approved make and design in 1.6 mm thick GI boxes with grid plate and earthing of third pin of the sockets and GI box with 2.5 sq mm. PVC insulated copper conductor stranded flexible FRLS cable. (Maximum 1 set shall be connected an one circuit),complete in all respect. 300 x 300 x 65 mm with minimum of four no. 6 amps switch socket outlet and four no. RJ - 45 outlets in EGA Access outlets of high quality materials to withstand heavy load and corrosion along with flame retardant trap frame with patented screwless ratchet bar level adjustment systemwith carpet trim trap, trap lid, pregalvanised trap cover and shall be supported by base unit, cable retainers, cable grommets, removable perforations etc complete as required. ( Make :- MK Ega ESB 300 / 3 GIE or approved equivalent )

300 x 300 x 65 mm with minimum of Three no. 6 amps switch socket outlet and one no. RJ - 45 outlets in EGA Access outlets of high quality materials to withstand heavy load and corrosion along with flame retardant trap frame with patented screwless ratchet bar level adjustment systemwith carpet trim trap, trap lid, pregalvanised trap cover and shall be supported by base unit, cable retainers, cable grommets, removable perforations etc complete as required. ( Make :- MK Ega ESB 300 / 3 GIE or approved equivalent )

Providing and fixing in position the following 16 gauge MS conduits concealed or exposed as called for including all accessories i.e bends, junction boxes with cover plate of approved make and design.

TOTAL CARRIED TO SUMMARY

B. CABLES, MAINS AND SUB MAINS

I. CABLES

1

1.1 3.5 core 120 sq. mm

1.2 3.5 core 70 sq. mm

1.3 4 core 25 sq. mm

2

2.1 4 core 10 sq. mm.

2.2 4 core 6 sq.mm2.3 3 core 6 sq.mm

2.4 3 core 4 sq. mm.

2.5 1 core 50 sq.mm unarmared Cu cable

2.6 1 core 10 sq.mm unarmared Cu cable 2.7 4 core 2.5 sq.mm control cable

2.8 7 core 2.5 sq.mm control cable

3

3.1 3.5 core 120 sq. mm

3.2 3.5 core 70 sq. mm

3.3 4 core 25 sq. mm

Supplying, Laying & testing of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification.

Supplying, Laying & testing of following 1100 volt grade XLPE insulated PVC sheathed copper conductor armoured cable as per specification.

Cable end termination of the following PVC insulated sheathed XLPE aluminium conductor armoured cables of 1100 volt grade including supplying and fixing of Aluminium crimping lugs,single compression glands with earthing facility and cable sockets etc. complete as required.

4

4.1 4 core 10 sq. mm Copper Cable

4.2 4 core 6 sq.mm Copper Cable

4.3 3 core 6 sq.mm Copper Cable

4.4 3 core 4 sq. mm Copper Cable

4.5 1 core 50 sq.mm unarmared Cu cable

4.6 1 core 10 sq.mm unarmared Cu cable 4.7 4 core 2.5 sq.mm control cable

4.8 7 core 2.5 sq.mm control cable

5

5.1 150 mm. dia.

5.2 100 mm. dia.

5.3 50 mm. dia.

TOTAL CARRIED TO SUMMARY

C. CABLE TRAYS , RACEWAY & JUNCTION BOXES :

1

1.1 450 mm x 40 x 40 x 1.6 mm thick

1.2 300 mm x 40 x 40 x 1.6 mm thick

1.3 150 mm x 25 x 25 x 1.6 mm thick

Cable end termination of the following PVC insulated sheathed XLPE copper conductor armoured cables of 1100 volt grade including supplying and fixing of copper crimping lugs,single compression glands with earthing facility and cable sockets etc. complete as required.

Providing and fixing of the following size medium class GI pipe sleeves.

Supply and installation of perforated cable tray of 1.6 mm thick pre galvanised iron of the following sizes including providing suspender block with 2 nos. 8 mm GI suspension bars complete as required for specification.

2

2.1 300 mm wide x 40 mm deep raceway

2.2 250 mm wide x 40 mm deep raceway

2.3 200 mm wide x 40 mm deep raceway

2.4 150 mm wide x 40 mm deep raceway

2.5 100 mm wide x 40 mm deep raceway

3

4

5

6

7

TOTAL CARRIED TO SUMMARY

D.

Providing and laying 1.6 MM thick GI factory fabricated raceways in partition of the following sizes including providing removable 3 mm thick GI cover knock out holes and fixing accessories earthing connectivity complete required including floor/ wall supports, access boxes and tap off boxes as per specification and cross over as per site requirement.

Providing and fixing of 300 x 300 x 50 mm deep (Nominal size) floor junction box including providing 3 mm thick stainless steel plate cover & S/S screws required as per specification.

Providing and fixing of 250 x 250 x 50 mm deep (Nominal size) floor junction box including providing 3 mm thick stainless steel plate cover & S/S screws required as per specification.

Providing and fixing of 200 x 200 x 50 mm deep (Nominal size) floor junction box including providing 3 mm thick stainless steel plate cover & S/S screws required as per specification.

Providing and fixing of 150 x 150 x 50 mm deep (Nominal size) floor junction box including providing 3 mm thick stainless steel plate cover & S/S screws required as per specification.

Providing and fixing of 100 x 100 x 50 mm deep (Nominal size) floor junction box including providing 3 mm thick stainless steel plate cover & S/S screws required as per specification.

DISTRIBUTION PANEL AND FINAL DISTRIBUTION BOARD

1 FLOOR MDB (UPS)

a. Incoming

i.

ii.

b. Bus Bars

c. Outgoing

i. 40 Amps TP+2N MCB-3 No.

ii. 40 Amps DP MCB-3 No.

Notes:-

i. All MCCB's shall be of 25 KA (Ics) breaking capacity.ii. All MCB's shall be of 10 KA (Ics) breaking capacity.

FLOOR MDB (UPS) described as above

2 FLOOR MDB (UPS)

a. Incoming

Design, fabrication, assembling, wiring, supply installation, testing and commissioning of LT panel /Main distribution panels / sub- distribution panels, fabricated out of 14 gauge CRCA sheet steel in cubicle formation, compartmentalized, from 3b consutruction, free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel, `T’ sections and / or flats wherever necessary. 16 gauge CRCA sheet steel shall be used for final distribution panels. 3 mm thick cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before powder coating as per specifications and final approved shade. 2 Nos. earthing terminals shall be provided for all distrtibution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication of panels.

1 No. 125 amps 3P+2N, Isolator (on load type) with following accessories :

VAF digital electronic meter with inbuilt selector switch and 125/5 Amps suitable VA, CL 1 CTs . - 1 Set

Phase indicating light shall be protected by 2 Amps SP Control fuse. - 3 Set

200 Amps TP+2N Copper bus bars with heat shrinkable insulation sleeve. - 1 Set

1 No. 125 amps 3P+2N, Isolator (on load type) with following accessories :

i.

ii.

b. Bus Bars

c. Outgoing

i. 100 Amps TP+2N, MCCB-3 No.

ii. 40 Amps DP MCB-3 No.

Notes:-

i. All MCCB's shall be of 25 KA (Ics) breaking capacity.ii. All MCB's shall be of 10 KA (Ics) breaking capacity.

FLOOR MDB (UPS) described as above

3 FLOOR MDB (For Hub Room's DBs)

a. Incoming

1 No. 125amps 3P+2N, MCCB with following accessories :

i.

ii.

b. Bus Bars

c. Outgoing

i. 40 Amps 4 Pole MCCB-3 No.

ii. 40 Amps DP MCB-3 No.

VAF digital electronic meter with inbuilt selector switch and 125/5 Amps suitable VA, CL 1 CTs . - 1 Set

Phase indicating light shall be protected by 2 Amps SP Control fuse. - 3 Set

200 Amps TP+2N Copper bus bars with heat shrinkable insulation sleeve. - 1 Set

VAF digital electronic meter with inbuilt selector switch and 125/5 Amps suitable VA, CL 1 CTs . - 1 Set

Phase indicating light shall be protected by 2 Amps SP Control fuse. - 3 Set

200 Amps TP+2N Copper bus bars with heat shrinkable insulation sleeve. - 1 Set

Notes:-

i. All MCCB's shall be of 25 KA (Ics) breaking capacity.ii. All MCB's shall be of 10 KA (Ics) breaking capacity.

FLOOR MDB (For Hub Room's DBs) described as above

4 FLOOR MDB (For Server & Hub Room's DBs)

a. Incoming

1 No. 40 amps 3P+2N, MCB with following accessories :

i.

ii.

b. Bus Bars

c. Outgoing

i. 40 Amps DP MCB-6 No.

Notes:-

i. All MCCB's shall be of 25 KA (Ics) breaking capacity.ii. All MCB's shall be of 10 KA (Ics) breaking capacity.

FLOOR MDB (For Hub Room's DBs) described as above

5 FLOOR MDB-1

a. Incoming

i.

VAF digital electronic meter with inbuilt selector switch and 40/5 Amps suitable VA, CL 1 CTs . - 1 Set

Phase indicating light shall be protected by 2 Amps SP Control fuse. - 3 Set

150 Amps TP+2N Copper bus bars with heat shrinkable insulation sleeve. - 1 Set

1 No. 160 amps 4P Isolator (on load type) with following accessories :

VAF digital electronic meter with inbuilt selector switch and 160/5 Amps suitable VA, CL 1 CTs . - 1 Set

ii.

b. Bus Bars

c. Outgoing

i.

ii. 40 Amps 4 pole MCB - 3 No.

Notes:-

i. All MCCB's shall be of 25 KA (Ics) breaking capacity.ii. All MCB's shall be of 10 KA (Ics) breaking capacity.

FLOOR MDB-1 described as above

6 FLOOR MDB-2

a. Incoming

i.

ii.

b. Bus Bars

c. Outgoing

Phase indicating light shall be protected by 2 Amps SP Control fuse. - 3 Set

200 Amps 4P Aluminium bus bars with heat shrinkable insulation sleeve. - 1 Set

1 No. 63 Amps 4 pole MCB with VAF digital electronic meter with inbuilt selector switch and 63/5 Amps suitable VA, CL 1 CT and 63 Amp 4P Al bus bar along with 3 No 40A 4P MCB as outgoings- 1 set.

1 No. 125 amps 4P Isolator (on load type) with following accessories :

VAF digital electronic meter with inbuilt selector switch and 125/5 Amps suitable VA, CL 1 CTs . - 1 Set

Phase indicating light shall be protected by 2 Amps SP Control fuse. - 3 Set

200 Amps 4P Aluminium bus bars with heat shrinkable insulation sleeve. - 1 Set

i.

ii. 40 Amps 4 pole MCB - 3 No.

Notes:-

i. All MCCB's shall be of 25 KA (Ics) breaking capacity.ii. All MCB's shall be of 10 KA (Ics) breaking capacity.

FLOOR MDB-2 described as above

7 FINAL DISTRIBUTION BOARDS

7.1 Type A (Normal Lighting DB)

7.2 Type B (General Power DB)

7.3 Type C (Server DB-Racks)

7.4 Type D (UPS Workstation DB)

1 No. 63 Amps 4 pole MCB with VAF digital electronic meter with inbuilt selector switch and 63/5 Amps suitable VA, CL 1 CT and 63 Amp 4P Al bus bar along with 3 No 40A 4P MCB as outgoings- 1 set.

Supply, installation, testing and commissioning of the following cubicle type 1.6 mm thick CRCA sheet steel enclosed and partitions to segregate phases recessed in wall or surface mounted final distribution boards of the following description. Distribution board shall be powder coated and double door construction and in four tier configuration.

TPN DB, 18 Nos.10/ 16/ 20/ 32 Amps SP MCB’s as outgoing with 3 Nos. 40 Amps ELCB’s of 100 mA leakage current and 1 No. 40 Amps 4 pole MCB as incomer with separate neutral link for each phase.

TPN DB, 24 Nos.10/ 16/ 20/ 32 Amps SP MCB’s as outgoing with 3 Nos. 63 Amps ELCB’s of 100 mA leakage current and 1 No. 63 Amps 4 pole MCB as incomer with separate neutral link for each phase.

TPN DB, 24 Nos.10/ 16/ 20/ 32 Amps 'D' curve SP MCB’s as outgoing with 1 No. 100 Amps 4 pole MCCB (20 kA) as incomer with separate neutral link for each phase.

7.5 Type E (Emergency Lighting DB)

7.6 Type F (Hub Room DB-Racks)

8

9

10

11

TOTAL CARRIED TO SUMMARY

E.

1

TPN DB with 24 Nos. 16/ 20 amps 'D' curve SP MCB as outgoing and 1 No. 63 Amps 4 Pole MCB of 10 KA at 8/ 20 micro second withdrawable type surge arrester with operation indicator as Incomer and separate neutral link for each phase. Phase incdication light with MCB shall also be provided.

6 way SPN DB, 6 Nos.10/ 16/ 20/ 32 Amps 'D' curve SP MCB’s as outgoing with 1 No. 40 Amps DP ELCB + MCB as incomer with separate neutral link for each phase.

8 way SPN DB, 8 Nos.10/ 16/ 20/ 32 Amps 'D' curve SP MCB’s as outgoing with 1 No. 40 Amps DP, MCB as incomer .

Supply and fixing in position 1000 mmX 2000 mm wide rubber matting of 1.1 KV grade as per IS 15652-2006 . Thickness of rubber mat shall be not less than 2.5 mm.

Supply, installation, testing and commissioning of 63 amps 4 pole MCB in 1.6 mm thick MS enclosure of approved make design and painted with approved paint shade.

Supply, installation, testing and commissioning of 40 amps 4 pole MCB’s in 1.6 mm thick MS enclosure of approved make design and painted with approved paint shade.

Supply, installation, testing and commissioning of 32 amps double pole socket outlet with MCB in polycarbonate enclosur with all accessories complete as required.

EARTHING INSTALLATION (FOR DISTRIBUTION SYSTEMS, UPS, SERVER & EPABX ETC.)

Supplying, fixing, testing and commissioning of following bare Copper/GI tapes including all necessary fixing accessories and effecting connections.

1.1 25 x 6 mm thick GI tape

1.2 25 x 3 mm thick GI tape

1.3 8 SWG GI wire

2

2.1 Single core 35 sq.mm Green colour cable (for UPS)

2.2

2.3 Single core 6 sq.mm Green colour cable (DB UPS)

3

TOTAL CARRIED TO SUMMARY

F. SUPPLY & INSTALLATION OF LIGHTING FIXTURES

1

2

Providing, laying, testing and commissioning of following 1100 volts grade PVC insulated sheathed copper conductor FRLS unarmoured cable including copper thimbles, fixing hardware as required.

Single core 16 sq.mm Green colour cable (Comm. Room/ EPABX/ Wiring Closet)

Supply, installation, testing and commissioning of lockable earth terminal box fabricated out of 14/ 16 gauge CRCA sheet steel in cubical formation, dust and vermin proofin with transparent cover with 2 No. 50 x 6 mm copper strip with 30 No. 8mm dia holes with 8mm x 25mm dia brass nut bolt with double washer.

Supply, installation, connecting,testing & commissioing of following lighting fixtures with all fixing accessories etc. as required.

Recessed mounted Slim linear light fixture: PHILIPS TB x 320, 1x28 W- MI louvers or Wipro GCF 33 with louvers or approved equal in quality and design complete with 1 x 28 W lamp, ballast and all accessories as required.

Recessed mounted PHILIPS SERENO-TBS 669 2x28 W light fixtures or approved equal in quality and design complete with 2 x 28 W lamp, ballast and all accessories as required.

3

3.1

3.2

3.3

4

5

5.1

6

6.1

Recessed mounted 600x600 mm (4x14 W) light fixtures or approved equal in quality and design complete with 4 x 14 W lamp, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

SURFACE mounted/HANGING LIGHT 600x600 mm (4x14 W) light fixtures or approved equal in quality and design complete with 4 x 14 W lamp, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

SURFACE mounted/HANGING LIGHT 300x1200 mm (2x36 W) light fixtures or approved equal in quality and design complete with 2 x 36 W lamp, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

Recessed mounted 600x600 mm (2x36 W) light fixtures or approved equal in quality and design complete with 2 x 36 W lamp, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

Recessed mounted 2x18 W light fixtures or approved equal in quality and design complete with 2 x 18 W lamp , ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

Recessed mounted (1x36 W) in quality and design complete with 1X36 W lamps, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

Surface mounted (1x36 W) or approved equal in quality and design complete with 1X36 W lamps, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

Recessed 1x28 W with louvers or approved equal in quality and design complete with 1X28 W lamp, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

Surgace mounted 1x28 W with louvers or approved equal in quality and design complete with 1X28 W lamp, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

7

8

9

10

11

12

13

14

14.1

TOTAL CARRIED TO SUMMARY

Recessed mounted Light Nova- QBS 050 or approved equal in quality and design complete with 2X18 W CFL lamps, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

Surface mounted mounted 1x28 W or approved equal in quality and design complete with 1X28 W lamp, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

Recessed mounted Philips BBS 170 Square downlighter 1x15W LED or approved equal in quality and design complete with 1X15 W LED lamp, ballast and all accessories as required.

Recessed mounted TOILET MIRROR-FWZ 30D (616 long)1x13W or approved equal in quality and design complete with 1X13 W lamp, ballast and all accessories as required.The makes are philips/thorn/pier light/wipro

Self contained single sided exit sign for wall / ceiling / pendant cantilever mounting with lamps for non maintained battery backup emergency lighting for 3 hours duration of SIGNTECH MAKE

Self contained double sided exit sign for wall / ceiling / pendant cantilever mounting with lamps for non maintained battery backup emergency lighting for 3 hours duration of SIGNTECH make.

Non Regulating high performance, programmable presence detector for lighting control through passive Infrared, Off delay time in steps of 5 mins, with a coverage area of 6 meter in diameter Wipro Cat. No COB 11010 or equivalent in design and quality.

Providing and fixing heavy duty comercial wall/ceiling fans at different AND ADJUSTABLE heights mechanism of bajaj/crompton/havells. The rates to be quoted with complete wiring in conduit including the operating switch/sockets and speed reulator.

Providing and fixing heavy duty comercial EXHAUST fans at different height of Almornd/crompton/havells. The rates to be quoted with complete wiring in conduit including the operating switch/sockets and speed reulator.

G. CONDUITING, WIRING & CABLING FOR MATV SYSTEM

1

1.1 32 mm dia

1.2 25 mm dia

2

2.1 TV Signals outlet

3

3.1 Eight way (S-8)

3.2 Eight way Tap Off (T8)

3.3 Two way tap off (T2)

4

5

TOTAL CARRIED TO SUMMARY

H.

1

Providing and fixing in position the following 25 mm dia rigid MS conduits concealed or exposed as called for including all accessories i.e bends, junction boxes with cover plates of approved make and design.

Supply and fixing following signal outlets with grid plate in 1.6 mm thick GI box complete including cutting, chases, fixing of GI boxes and making good. (Cover plate shall match the colour, size and make of wiring accessories to be used in the project

Supply, erection, testing and commissioning of splitter / tap off mounted in suitable sizes MS boxes for MATV system and shall be suitable for interactive system.

Supply, laying, connecting and commissioning of RG-11 Foam series tinned copper co-axial cable of MATV as per specification in existing MS conduit.

Supply, laying, connecting and commissioning of RG-6 foam series tinned copper co-axial cable of MATV as per specification in existing MS conduit.

CONDUITING, WIRING & CABLING FOR TELEPHONE SYSTEM

Supply, installation, testing and commissioning of following telephone cable as per the specification. The cable should have flexibleJacket and ripcord for easy stripability

1.1 4 pair unshielded twisted pair CAT 6 cableTOTAL CARRIED TO SUMMARY

ACCESS CONTROL & CCTV SYSTEM

1

2

3

4

5

6

7

9 8 C x 1.5 Sq.mm Cu, Conductor un armoured power cable

10

11

12

13 Supply and laying of armoured RG 11 Co-axial video cable

Supply, installation, testing & commissioning of Proximity card readers suitable for mounting on metal surface/metal frames including all accessories

Supply, installation, testing and commissioning of proximity cards (Blank Faced)

Supply, installation, testing and commissioning of Door Controller for Controlling the above card readers as per specification mentioned including all accessories. The controller should be 6 reader controller with built in TCP/IP, 32 bit processor, 1,50,000 card capacity per controller and 1,00,000 event buffer per controller.

Supply, installation, testing and commissioning of Double Leaf Electromagnetic lock

Supply, installation, testing and commissioning of Single Leaf Electromagnetic lock

Supply , installation, testing and commissioning of Door Contact

Supply, installation, testing and commissioning of door open break glass switch for individual access control door.

Supply and installation of 1/3" CCD colour fixed indoor direct dome camera with 3.6mm lens and 480 TV lines resolution.

Supply and installation of 12V DC 2.5 Amps. Power supply unit with Battery backup.

Supply and laying of 4 core 1.0 sqmm shielded power Cable in conduit.

14 Supply and laying of Cat5 cable in Existing conduit

15

16

TOTAL

BIDDING DOC. No.:

BILL OF QUANTITIES ( PLUMBING FIXTURES WORK)

Supply and Laying of 25mm dia PVC conduit with junction bend , tee and all necessary accessories etc. as required.

Supply & installation of Network Video Recorder complete with Video Mangement software capable of server failover feature for 16 cameras with recording at CIF resolution at 25 FPS

(D)HVAC WORKS

NAME OF WORK :- INTERIOR RENOVATION WORK WITH MEP WORK FOR MAHINDRA EDUCATIONAL INSTITUTE AT MSAT BAHADURPALLI CAMPUS HEDERABAD

DESCRIPTION

A. Total of HVAC works

GRAND TOTAL

ITEM DESCRIPTIONS

1 SHEET METAL WORKS

a

1.2mm thk Plenum 1.0mm Ducting0.8mm Ducting0.63mm Ducting

b

150 MM Wide

c

with 4 side flanges.100 / 150mm wide150mm wide curved grille

2 DISC VALVES:

a

powder coated 6” dia. Disc Valve

without extra cost

ITEM NO.

ITEM NO.

Fabrication, supply, installation, testing & commissioning of ducting complete withsplitter dampers, turning vanes, access doors, supports etc. as per drawings andspecifications. Entire ductwork to be with painted angle iron flange joints.

All exposed ventilation duct work should be painted with 2 coats of epoxy primer and 2coats of epoxy paint.All the supports of the duct will be painted to match the ducting.

3 slot MD 75 diffuser continuous with complete end flanges, etc.

Aluminium extruded powder coated continous grilles model EP-00/15/30

Disc valves with adjustable central cone ( for balancing ), coupling sleeve & a lockingarrangement for fresh air & toilet exhaust. Disc valves are made Aluminium extruded

If required Contractor should blank off the extra portion of grille

without additional cost and provide deflection of 0 deg or 30 deg

b

removable core construction.

c

active section of sizes given below.

d

600 x 600

e

The damper should be gear operated type.

f Volume control dampers in ducts.

g

Air Handlling Unit and Machine outlet.(1.5 sq mt each)

included in ducting cost.

h

Fire dampers for S.A.

Control cablingFire dampers for R.A.

Provide necessary cabling to close damper when AHU is off

Supply, installation of Al. extruded powder coated square diffusers flush type and

Supply Air diffuser with damper flush type shall be 24" x 24" panel size with

Diffuser plenums with round inlet connection and VCD (for required air quantity) constructed of 20G GSS and insulated with 19mm Armasound with micro ban.

Supply, installation of Al. extruded powder coated square diffusers

and removable core construction without dampers for return air

Supply, installation, testing and commissioning of return air louvers

Opposed blade dampers black powder coated vertical blades type for supply air collar.

Supply, installation, testing and commissioning of volume control dampers at

Note:Splitter dampers to be provided at all duct splits and to be

Supply, installation of fire dampers with motorized actuator and control cabling as per

specification. At the unit outlet. ( It should be compactiable with BMS)

Motorized actuators rated for fire dampers and spring return type.

Note: Fire Damper installation details should be as per our drawings.

for sealing the gap around the fire damper.

i

ducting with its matching supports and other accessories.300mm dia.250mm dia.225mm dia.200mm dia.175mm dia.150mm dia.125mm dia.

j

connection

Notes:

are to be provided Contractor as decided by Consultant.

Muslin cloth cover for all air outlets during construction.

TOTAL

3 THERMAL & ACOUSTIC INSULATION

a

as per specs

b

rivets.

Fire barrier moldable putty/sealant should be as per 3M make

Supply, installation,testing and commissioning of following sizes of insulated flexible

Supply and Installation of fire resistant flexible canvass connection between indoor and duct

The ducting support should be as per tender specification and additional supports

Duct seal sealant for longitudinal and transverse joints for complete duct work.

Pressure testing of complete duct work as per DW/ SMACNA standard.

Supply Duct insulation with 19mm thick Armaflex Class 'O' fixed using SR 998adhesive. All joints to be sealed using adhesive and 50mm wide self adhesive tape

Acoustic lining of plenums and duct work with 15mm thick Armafoam with microbialcoating. Stick using recommended adhesive and mechanically fastened with pop

c

TOTAL

4 VENTILATIONS FAN

a Propeller fan

for store rm and electrical rm extract air:100 CFM Make - Kruger

b Inline Fan

for toilet extract air:350 CFM Make - Kruger

c Inline Fan

for Kitchen extract air:250 CFM Make - Kruger

TOTAL

Acoustic lining of duct work with 25mm thick Fiberglass Twiga 200. Stick using hotbitumen and mechanically fastened with GI nut & bolts and covered with fiberglasscloth, finally finished with 24gauge perforated aluminium sheet as per specs.

Supply, installation, testing & commissioning of propeller Fans complete with gravity louvers, bird screen and all accessories with necessary electrical work and cabling as may be required

Supply, installation, testing & commissioning of propeller Fans complete with gravity louvers, bird screen and all accessories with necessary electrical work and cabling as may be required

Supply, installation, testing & commissioning of propeller Fans complete with gravity louvers, bird screen and all accessories with necessary electrical work and cabling as may be required

(E)DORMITORY

BIDDING DOC. No.:

BILL OF QUANTITIES ( PLUMBING FIXTURES WORK)

DESCRIPTION

A. BUNK BED AND LOOSE FURNITURE

B. STORAGE CABINETS

C PAINT WORK

GRAND TOTAL

ITEM DESCRIPTIONS

1.0 BUNK BED AND LOOSE FURNITURE

1.1

1.2

(E)DORMITORY

NAME OF WORK :- INTERIOR RENOVATION WORK WITH MEP WORK FOR MAHINDRA EDUCATIONAL INSTITUTE AT MSAT BAHADURPALLI CAMPUS HEDERABAD

ITEM NO.

ITEM NO.

Providing and placing heavy duty strong bunk beds with matress in metal and wood. The design of the bed is to be approved by the client and the architect. One bunk bed is to be provisioned for two people. The basic price of the bunk bed is 18500/-. The make are unicos/godrej/wipro/BP ergo

PROVIDING AND FIXING study table of sixe 1200x600x750 with an drawer unit in post laminated board. The laminate is to be a per the approved shade and colour. The makes are BPErgo/Wipo/Unicos/unicos. The basic price to be 5800

1.3

TOTAL

2.0 STORAGE CABINETS

2.1

TOTAL

2.0 PAINT WORK

2.1

TOTAL

GRAND TOTAL

Show all tax components extra.Tax components

VAT -- NO VAT

Service Tax @4.944% Extra on the above rates

WCT @ 5% Extra on the above rates

labour cess 1% extra

Providing and Placing Low back fabric chair with hydrolic and tilit mechanism and on caster of Godrej/Merry Fair/Wipro/Unicos/Geken. The basic price to be 4200

Providing and Fixing of modular storage cabinet in 19mm Board finsihed with approved laminate of size 900x600x2100 INCLUDING ALL THE HARDWARE AND FITTINGS complete in all respect. The makes are BP Ergo/Unicos/Wipro/Geken.

Providing and applying acrylic emulsion paint of approved colour/shade, brand & manufacture in two or more coat as required to get desired finish including preparing surfaces, filling up with gypsum or approved crack filler, binder; cleaning and making the surface dust-free, applying a sealer or primer coat of paint as recommended by approved paint manufacturer. Item also required scaffolding, cleaning and protecting till the handing over of site all complete to entire satisfaction of the Engineer-in-charge. (At all heights & Levels)

Loading/unloading/transportation/insurance NO EXTRA CHARGES

SUMMARY OF BILLS OF QUANTITIES ( INTERIOR WORKS)

BIDDING DOC. No.:

BILL OF QUANTITIES (INTERIOR WORK)

Unit

Sqm

NAME OF WORK :- INTERIOR RENOVATION WORK WITH MEP WORK FOR MAHINDRA EDUCATIONAL INSTITUTE AT MSAT BAHADURPALLI CAMPUS HEDERABAD

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Rmt

Rmt

Smt

Sqm

Sqm

Rmt

Sqm

Sqm

Rs.

Sqm.

Sqm

Rmt

Nos

Rs.

Cum

Nos

Nos

Nos

NosNos

Nos

Sqm

Sqm

Sqm

Sqm

Rs.

Sqm

Sqm

Sqm

Sqm

Sqm.

Sqm.

Sqm.

Rmt

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqm

Sqmt

Rmt

Rmt

Rmt

Sqmt

Sqmt

Sqm

Sqm

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Nos

Nos

Nos

Sqmt

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt.

Sqmt

Kg

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

NosNosNos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

RMT

Nos

Sqmt

Sqmt

Nos

Nos

Nos

Nos

Sqmt

Nos

Nos

Nos

Nos

Nos

Nos

Nos

BIDDING DOC. No.:

BILL OF QUANTITIES ( PLUMBING FIXTURES WORK)

DESCRIPTION

SUPPLYING SANITARY FIXTURES FIRE FIGHTING ( SUPRESSION+DETECTION+PA)

GRAND TOTAL

INTERNAL PLUMBING FIXTURES AND FIRE

DETECTION AND FIGHTING WORKS

NAME OF WORK :- INTERIOR RENOVATION WORK WITH MEP WORK FOR MAHINDRA EDUCATIONAL INSTITUTE AT MSAT BAHADURPALLI CAMPUS HEDERABAD

Unit

No.

No.

No.

No.

No.

NOTE: All sanitary & plumbing fixtures/fittings in this head shall be handed over in good conditions complete with the accessories for fixing to the other contractor of owner.

No.

No.

No.

No.

No.

No.

No.

No.

No.

No.

No.

No.

RmtRmtRmtRmtRmt

RmtRmtRmt

Nos

Nos

Nos

Unit

RmtRmtRmtRmtRmtRmtRmtRmt

No.

No.No.

No

No.

No.

Nos

RmtRmtRmt

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Nos

Rmt

Rmt

Nos.

Nos.

Nos.

Nos.

Nos.

Nos.

Rmt.

BIDDING DOC. No.:

INTERNAL ELECTRICAL WORKS

NAME OF WORK :- INTERIOR RENOVATION WORK WITH MEP WORK FOR MAHINDRA EDUCATIONAL INSTITUTE AT MSAT BAHADURPALLI CAMPUS HEDERABAD

BILL OF QUANTITIES ( INTERNAL ELECTRICAL WORK)

DESCRIPTION

CIRCUIT CUM POINT WIRING (SUPPLY, INSTALLATION, TESTING AND COMMISSIONING)CABLES, MAINS AND SUB MAINS

CABLE TRAYS , RACEWAY & JUNCTION BOXES :DISTRIBUTION PANEL AND FINAL DISTRIBUTION BOARD

EARTHING INSTALLATION (FOR DISTRIBUTION SYSTEMS, UPS, SERVER & EPABX ETC.)SUPPLY & INSTALLATION OF LIGHTING FIXTURES

CONDUITING, WIRING & CABLING FOR MATV SYSTEMCONDUITING, WIRING & CABLING FOR TELEPHONE SYSTEM

ACCESS CONTROL & CCTV SYSTEM

GRAND TOTAL

SCHEDULE OF QUANTITIES

All equipment and material shall be IS approved.

All approvals shall be obtained from Owner's site representative / Consultant / Project Manager

Unit

quantity of work executed as measured at the site at the rates tendered. The Client reserves the right to increase or decrease any of the quantities, or to ommit totally any item of work. Any All the items of work given in this schedule of quantities shall be executed strictly in accordance with the latest Indian Standard Specifications and the requirements of the Electricity Supply Authority read in conjunction with the relevant drawings and Specifications.work is to be performed. He shall also check and ascertain the location of any existing structure or equipment or any other situation which may affect the work. No extra claim as a

All equipment and material shall be inspected at manufacturer’s works as per relevant IS by the

All vendor drawings shall be approved by the Owner's site representative / Consultant / Project

All Testing and Commissioning shall be as per relevant IS for equipment and IS:732:1989 for the installation. All testing records are to be maintained and submitted for Owner's site

Pt

Pt

Pt

Pt

Pt

Pt

Pt

Pt

Sets

Sets

Sets

Sets

Sets

Sets

No.

No.

No.

Sets

Sets

RM

RM

RM

RM

RM

RM

RM

RMRM

RM

RM

RMRM

RM

No.

No.

No.

No.

No.

No.

No.

No.

No.RM

RM

RM

RM

RM

RM

RM

RM

RM

RM

RM

RM

RM

No.

No.

No

No

No

Set.

Set.

Set.

Set.

Set.

Set.

No.

No.

No.

No.

No.

No.

RM

No.

No.

No.

RM

RM

RM

RM

RM

RM

No.

No.

No.

No.

No.

No.

No.

No.

No.

Nos

No.

Nos

No.

No.

No.

No.

No.

No.

No.

No.

No

RM

RM

No.

No.

No.

No.

RM

RM

RM

No.

No.

Set

No.

No.

No.

No.

RM

Nos

Nos

RM

RM

RM

RM

Nos

BIDDING DOC. No.:

BILL OF QUANTITIES ( PLUMBING FIXTURES WORK)

HVAC WORKS

NAME OF WORK :- INTERIOR RENOVATION WORK WITH MEP WORK FOR MAHINDRA EDUCATIONAL INSTITUTE AT MSAT BAHADURPALLI CAMPUS HEDERABAD

DESCRIPTION

Total of HVAC works

GRAND TOTAL

Unit

Sq.mtrSq.mtrSq.mtrSq.mtr

RMT

RMTRMT

Nos.

Nos.

Nos.

Nos.

Nos.

Sq.mtr

Sq.mtr

Nos.

Sq.mtr

Nos.

LotSq.mtr

Lot

RMTRMTRMTRMTRMTRMTRMT

Nos

Sq.mt

Sq.mt

Sq.mt

Nos

Nos

No

DORMITORY

BIDDING DOC. No.:

BILL OF QUANTITIES ( PLUMBING FIXTURES WORK)

DESCRIPTION

BUNK BED AND LOOSE FURNITURE

GRAND TOTAL

Unit

Nos

Nos

DORMITORY

NAME OF WORK :- INTERIOR RENOVATION WORK WITH MEP WORK FOR MAHINDRA EDUCATIONAL INSTITUTE AT MSAT BAHADURPALLI CAMPUS HEDERABAD

Nos

Nos

Sqm

Rs.

Date- 23 April 2014

Order No : TECHM\NT\HSZ2\WO\HYD\2365\2014-2015

No Description of item Unit Quantity Rate

A FALSE CEILING (GYPSUM )

1 Sqm 7,000.00 680.00

1a Sqm 350.00 900.00

1b Sqm 100.00 450.00

1c Sqm 150.00 500.00

TOTAL (A) - Gypsum Ceiling

Providing and fixing in 12.5mm thick gypsum plaster board suspended false ceiling in horizontal / vertical surfaces, stepped, cove ( straight & curvature), consisting of G.I. Perimeter channel of size 0.55mm thick having one flange of 20mm and other flange of 30mm and a web of 27mm along with the perimeter of ceiling, screws fixed to brick wall / partition with the help of nylon sleeves and screw at 610mm centres. Then suspend G.I. Intermediate channels of size 45mm x0.9mm thick with two flanges of 15mm each from the soffit at 1220 mm centres with ceiling angle of width 25 x 0.55mm thick to soffit with G.I. cleat and steel expansion fasteners.

Ceiling sections of 0.5mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm fixed to intermediate channels with connecting clips and in direction perpendiclar to the intermediate channel at 457mm centres. 12.5mm thick gypsum plasterboard with tapered edge of size 1200mm x 2400mm is then screwed to the ceiling section with 25m dry wall screws at 230mm centres.

Finally boards should be jointed and finished with jointing compound paper tape to have a flush look which includes filling and finishing tile tapered edge of the board. The item includes providing and fixing angle beads, edge beads of 20mm x 27mm x 30mm x 0.55mm wherever AC/ Light fittings are to be installed, trap door in ceiling where directed . The item also includes providing cutouts for electrical fixtures etc. Marking has to be provided for Sprinkler, Smoke Detectors etc. on the ceiling and also templates have to be provided and fixed in the ceiling made of 6.0mm BWR Ply.

Provision has to be made for suspended tiled ceiling by providing MS Angles, Tees, Bars etc. adequate supports wherever required. Using Gypsteel (India Gypsum) make

Note :- As laid (Gypsum surface area) area shall be measured for billing. Design ceiling area shall be considered as 8% of total area.

Same as above 1, but ceiling with MR Grade gypsum board ceiling in toilets and wet areas.

Extra on item No. 1, for fixing Extra sheet of Gypsum board in ceiling to make 12mm groove and any design in the ceiling as per drg in lift lobby area.

Providing and fixing the aluminium open cell ceiling starlam 9 of size 600x1200mm balde and the main blade to be 9mm/H-42mm/Pitch-66mm. The entire panels to be fixed by U-94 carrier and clips. The aluminium panels should be powder quoted as per the approved colour from the project manager.

B PARTITIONS AND PANELLING

1 Sqm. 2,200.00 825.00

1a Sqm 1,000.00 700.00

2 Sqm 4,000.00 400.00

Providing and fixing GI frame work of 48mm boxed studs (0.55mm thick, having one flange of 34mm and another flange of 36mm ) for vertical members placed 610mm center to center and U-channels(0.55mm thick having equal flanges of 32mm) for horizontal members placed at 610mm center to center both ways with joints staggered to avoid through joints. A metal channel section 0.9mm thick 99mm wide is to be fixed at the skirting level and at door level for fixing skirting and other attachments. The frame work is to be adequately anchored in ceiling and on floor having additional framework of hollock wood treated with anti-termite and fire retardant paint at junctions of doors, windows etc. complete. Hollock wood shall be filled in G.I framework in periphery and glazed opening. The job shall include extra support for conduit / electrical boxes and for window and door. Using Gypsteel (India Gypsum) make

Providing and fixing (Two layers) of 12.5mm thick glass fiber reinforced Gypsum Board cladding (confirming to IS-2095 -1982 and 2542-1981) over GI frame work screws fixed with dry wall screw of 25 mm for first layer and 35mm for second layer at 300 mm center with joints staggered on each layer to avoid through joints. Square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, paper tape and two coats of primer suitable for Gypsum Board. The external angles of the partition having Gypsum board has to be protected by using G.I. angle beads (25x25x0.5) and all the exposed edges of Gypsum board have to be protected by using G.I. edge bead (25x12.5x0.5). (G.I. frame will be paid separately). The item includes providing cutouts for electrical fixtures etc. The item includes a provision to be made for the A/C ducts to pass through the partition and then sealing the same around the duct with Gypsum Board.

Providing and fixing AIuminum frame work of section 50mmx25mmx2mm thick, studs for vertical members placed 610mm center to center and the same aluminium section 50x25x2mm for horizontal members placed at 610mm center to center both ways with joints staggered to avoid through joints. The vertical and horizontal Aluminium section jointed with the help of aluminium angle cleats. The frame work is to be adequately anchored to slab and at floor, with horizontal member at floor and soffit, proper in line and level, screw fixed to Aluminium section with 25mm long dry wall screws. Every alternate Aluminium frame to go up to actual ceiling . Complete as per drawing and directions of architect Including Acoustic insulation in Aluminum Frame partition of 50mm thick insulwool (glass wool) manufactured by U.P. Twiga Ltd., or approved equivalent make of 48kg / m3 density, well compacted and laid in position. The job shall include fixing wiremesh to hold wool on both sides. The job shall include extra support for conduit / electrical boxes and for window and door (Aluminum make should be Jinadl / dalco.)

3 Sqm 1,500.00 2,080.00

4 Sqm 25.00 1,200.00

5 Sqm 110.00 1,000.00

6 Sqm 92.00 550.00

7 Sqm 80.00 550.00

8 Sqm 150.00 1,000.00

9 Sqm 100.00 800.00

10 Sqm 2,200.00 1,050.00

11 Sqm 50.00 1,200.00

12 Sqm. 50.00 1,050.00

Providing and fixing in position 12mm thick bwp ply on base frame with staggered Joint. 6mm thick MDF shall be pasted on it with groove on Junctions finished with 1mm thk laminate of approved shade and make on existing Al frame work, Top edge of ply to be covered with 12x 25 mm white beech beeding fished in melamine polish/ Duco Paint. Al so include the 100mm high metalic laminate skirting made with 12mm thik Ply.(Frame shall be paid separately as per item 2) The item includes providing cutouts for electrical fixtures, provision to be made for the A/C ducts to pass through the partition and then sealing the same around the duct with ply where ever required.(for laminate basic cost-40/- per sft).

Providing and fixing of 12mm ply finished with 4mm thk Veneer of approved shade and make on existing Al frame work (item no 2) Top edge of HDF to be covered with 12x 25 mm white beech beeding fished in melamine polish. (Veneer basic cost-120/- pfr sft).

Providing and fixing of 12mm Ply on existing Al frame work (item no 2) with out finishing.

Providing and fixing of 12mm ply (or one layer of 6mm and another layer of 4 mm HDF) finished with texture with luster paint of approved shade and make on existing Al frame work (item no 2) Top edge of HDF to be covered with 12x 25 mm white beech beeding fished in melamine polish. also include the 100mm high metalic laminate skirting made with 12mm thik Ply (Texture paint basic cost-65/- per Sft). Metalic laminate basic rate : Rs.60 per Sft.

Providing and fixing of 12mm MDF ( or one layer of 6mm and another layer of 4mm HDF) finished with duco paint of approved shade and make on existing Al frame work (item no 2).

HDF skin with one layer of 6mm ply and second layer of 4mm ply finished with approved Wall Papers on existing Aluminum frame work (Item no 2) Basic rate of wall paper is Rs.1000/- per SQM

Providing and fixing of 8mm MDF with 8mm thk mirror of approved make on existing Al frame work (item no 2) Top edge of mirror to be covered with 12x 25 mm white beech beeding fished in melamine polish/ Duco Paint.

Sealing of partition (above false ceiling) with 12mm gypsum on both sides on aluminium framework, to block the return air of A.C., wherever required, and provision of cutting for sound attenuators, 50mm thick glasswool wool blocks wraped in hesein paper for sound insulation, gpas around the duct to be filled after fixing of the ducts etc with Gypsum board and POP as directed by the engineer incharge.

Bison board partition-with 12mm bison board on both sides on aluminium framework, finished with two coats of primer and two coats of approved paint. Extra over item B-2

Providing and fixing 12mm thick MDF on Gypsum partition / Brick RCC wall with exposed surface towards the external windows duly painted with black japan paint with including sealing of joints with the mullion of windows wall using backer rod and non staining silicon all complete as per drawing.

13 Sqm 20.00 1,800.00

TOTAL (B) - Partitions and Frame works

C GLASS PARTITIONS

1 Sqm 5.00 20,000.00

2 Sqm 10.00 3,000.00

3 Sqm. 12.00 3,200.00

a Same as 6, but 10mm thick toughened glass. Sqm 5.00 3,000.00

b Same as 6, but 8mm thick toughened glass. Sqm. 6.00 2,800.00

4 Sqm 140.00 600.00

Providing & fixing in position 132mm thick Gypsteel Ultra™ stud partition ( 120 minute fire Rated) which includes two layers of tapered edge 15mm thick Gyproc® Fireline (conforming to IS:2095 – 1996-Part-I) is screw fixed with drywall screws of 25mm & 50mm at 300mm centres to either side of 70mm Gypsteel Ultra™ C stud (0.5mm thick having one flange of 34mm and another flange of 36mm made of GI Steel) placed at 610mm centre to centre in 72mm Gypsteel Ultra™ floor and ceiling channel (0.5mm thick have equal flanges of 32mm made of GI steel), which is anchored to the floor & true ceiling using suitable anchor fasteners. The boards are to be fixed to the framework with joints staggered to avoid leakage through joints. A Gypsteel fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) has to be provided at the horizontal joints of the outer layer of boards screw fixed to the studs using metal to metal flat head screws. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc Jointing compound, Gyproc Joint Paper tape and two coats of Drywall Top Coat (as per recommended practices of Saint- Gobain Gyproc India) . The junction of the partition with masonry & all penetration through the partition has to be treated with a intumescent fire sealant of equivalent fire rating. The job shall also include extra framing required for fixing support of misc items in server room etc.The job shall also include filling accoustic insulation material as per manufacturer's specification. ( Contractor to submit test certificate of 120 minute fire rating)

Providing and fixing full height 6mm thick with 2hrs Fire rated glazed partitions made of aluminum section finished with laminate over 12mm ply and Saintgobian make of 6mm thk toughened glass of size (4'0" X4'0") (which can be made of opaque, or transporant) of with a recessed U channel on the floor and ceiling

Providing and fixing full height 10mm toughened glasspartition fixed with SS Patch fitting and all gaps to be sealed with necessary sealant(GE make & all patch fittings with Dorma make only)

Providing and fixing in position clear glass glazing as per detail in drg. 12mm thick clear toughened glass with machine grinded and polished edge shall be fixed to partition with powder coated aluminium channel (50mm x 25mm X 2mm) at end, backer rod and clear silicon sealent. (Maximum possible sizes of glass to be used). Wherever glass is fixed to wall , the job shall include fixing with UV & s.s channels as detail.

Alloy/Jeb Glazing to accommodate 10mm thick toughened glass the fixed prtion will have 40x18mm (40.02 & 40.04 0n verticals & 40.05& 40.06 on top & bottom) section on all four sides. The rate will be including the rubber beading all as per Alloy specification and as per design and drawing

5 Sqm. 750.00 4,600.00

a Sqm 30.00 4,600.00

6 Sqm 20.00 4,000.00

Total (C) - Glass Partitions

D LOOSE FURNITURE

I Furniture

1 Main table

a 1800x600x 750(H) No's. 30.00 10,500.00

2

a 1050x450(d)x750(h) Nos 30.00 10,500.00

3 Back Storage unit

a 3000 lengthx450mmdepth Nos 30.00 15,000.00

4 Nos 6.00 12,000.00

Providing and fixing in posItion fixed glass glazing with wooden frame as per detail in drg. 100mm x 50mm section beech wood frame shall be fixed to partition frame with steel screws. 12 mm thick clear toughened glass with machine grinded and polished edge shall be fixed with beech wood beading.The job shall be completed by french polish of appd. stain on it & beeding should be melamine polish only.

Same as above but with 10 mm clear toughened glass shall be used.

Providing and fixing 2 layers of 8 mm toughened glasses (held together with 4 numbers of 18 mm dia SS studs). Fixed to dead walls / coloumns / partition.

Supply of Tables made in 25mm MDF and finished in 1.0mm Laminate of approved make & shade, resting on ms Powder coated frame structure, legs & Modesty panel and also having PVC beading/2 mm edge binding tape of approved profile to be provided to edges of Top.

Supply and fixing of Side ledge table with open shelf at rear end (as per drawing) 700mm height, Top made from 25mm Prelaminated MDF and finished with 1.0mm Laminate of approved make & shade and 2 mm thick edge binding tape on all exposed edges and 1 mm tape on all hidden edges, the table to be supported on gable end made of 18 mm thick Prelaminated MDF board with edge binding tape, on open side. Rate also to include a mobile pedestal drawer unit of size 450x500x650(h) with 3 drawers finished with Laminate with telescopic channels, locks, handles etc. complete.

Supply and fixing of Back Storage unit with open shelf at rear end (as per drawing) 700mm height, Top made from 25mm Prelaminated MDF and finished with 1.0mm Laminate of approved make & shade and 2 mm thick edge binding tape on all exposed edges and 1 mm tape on all hidden edges, the under structure (including 2 set of shutters, internal adjustable shelves & 3 drawers , as per drawing) made of 18 mm thick Prelaminated MDF board with edge binding tape. Rate to include all necessary hardware like telescopic channels, locks, handles etc. complete.

Providing & Fixing of Security Table 1800x600x1050 mm table finished in polished Corian on side, front, and top, steel inlay on front and 12mm toughened glass on top supported with SS brackets and studs as per drawing. Rate also to include the cost of 1 nos. storage unit 400x400x750 made of HDF and finished in laninate and keyboard tray. All internal surfaces to be finished in balancing laminate.( Corian basic cost Rs.1000/- per sft)

5 Nos 150,000.00

6 Nos 150,000.00

7 Nos 115,000.00

8 SQM 90.00 9,000.00

9 Nos 32,000.00

Providing & Fixing of 3500x1000x1050 Reception table with ply finished in Corian top and veneer on side, front, and top, steel inlay on front and 12mm toughened glass on top supported with SS brackets and studs as per drawing. Rate also to include the cost of 2 nos. storage unit 450x450x750 made of plywood and finished in veneer and keyboard tray. All internal surfaces to be finished in balancing laminate.all visible veneer to be finished in PU Lamination polish of approved shade and all other veneer surfaces to be finished in melamine polish of approved shade. Provision of cable management as per drawing with flip tops resting on SS hinges and sound absorbing bushes.( Corian basic cost Rs.1000/- per sft)

Providing & Fixing of 2400x675x1050 Main Entrance table with ply finished in Corian top and veneer on side, front, and top, steel inlay on front and 12mm toughened glass on top supported with SS brackets and studs as per drawing. Rate also to include the cost of 2 nos. storage unit 450x450x750 made of plywood and finished in laminate and keyboard tray. All internal surfaces to be finished in balancing laminate.all visible veneer to be finished in PU Lamination polish of approved shade and all other veneer surfaces to be finished in melamine polish of approved shade. Provision of cable management as per drawing with flip tops resting on SS hinges and sound absorbing bushes.( Corian basic cost Rs.1000/- per sft)

Supply of Executive serving counter size: 6000x600mm with 20mm corian top and frond member over ply storage base made from 19mm Hdf/Ply and finished in 4mm veneer of approved make & shade. All exposed edges as per design . Openable granite (basic rate Rs.225 per sqft.) shelve to be provided with 19mm ply and all necessary hardware accessaries, all inside surfaces to be polished as per design.

Providing and fixing of full height lockers up to 2250mm with each locker of size 300x300x400mm made of 19mm HDF finished with 1mm Laminate, each locker to be provided with all necessary hardware such as, S.S. Clip-on Auto close Hinges, Lock of approved make & finish, Magnetic Catcher, Tower Bolt, etc., all inside surfaces to be Laminate as per design. (Key should not come out if locker open) including locker no to be done in SS as per approved design.

Supply of concierge desk size: 4200x600mm with top 20mm granite (basic rate Rs.225 per sqft.) top over ply storage base made from 19mm Hdf/Ply and finished in 4mm veneer of approved make & shade. All exposed edges should be consealed with 6mm Teak wood lipping/25x18mm Pvc beeding and polished. Openable granite (basic rate Rs.225 per sqft.) shelve to be provided with 19mm ply and all necessary hardware accessaries, all inside surfaces to be polished.

10 SQM 10,000.00

11 Nos 15,000.00

12 Nos 10,000.00

13 Nos 15,000.00

14 Nos 23,000.00

15 Nos 25,000.00

16 Storages

Supply of concierge locker 750mm wide Storage made from 19mm Hdf/Ply and finished in 4mm veneer of approved make & shade. Storage shutter to be made from framed 5mm glass provided with all necessary hardware such as, S.S. Clip-on Auto close Hinges, Lock of approved make & finish, Magnetic Catcher, Tower Bolt, etc., all inside surfaces to be polished / Paint as per design. All exposed edges should be consealed with 6mm Teak wood lipping/25x18mm Pvc beeding and polished as per design.

Supply and fixing of 900mm wide clinic cot made with 1.2mm thick stainless steel sheet and 19mm dia ss pipe with hardware as per standard. Rate also include mattress, pillow, bed sheet with metal finish.

Supply and fixing of 750 mm wide clinic cot made with 1.2mm thick stainless steel sheet and 19mm dia ss pipe with hardware as per standard. Rate also include mattress, pillow, bed sheet.

Supply of Clinic Table : Size 1200x 750 x 750(H) made in 25mm MDF and finished in 1.0mm Laminate of approved make & shade, resting on SS pipe base of 75mm dia. 25mm x 18mm PVC / wooden beading of approved profile to be provided to edges of Top.

Supply of coupan counter size: 2100x600mm with top 20mm granite (basic rate Rs.225 per sqft.) top over ply storage base made from 19mm Hdf/Ply and finished in 4mm Laminate of approved make & shade. All exposed edges should be consealed with 6mm Teak wood lipping/25x18mm Pvc beeding and polished. Openable granite (basic rate Rs.225 per sqft.) shelve to be provided with 19mm ply and all necessary hardware accessaries, all inside surfaces to be polished.Rate al so include one no mobile pedestal unit size 450x450x675mm with 3 drawer with lock as per design and neccessaries hardware.

Supply of counter table size: 3000mm length ,600mm wide and 750 height with top 20mm granite (basic rate Rs.225 per sqft.) top over ply base made from 19mm Hdf/Ply and finished in 4mm Laminate of approved make & shade. All exposed edges should be consealed with 6mm Teak wood lipping/25x18mm Pvc beeding and polished. Base made from 19mm Hdf/Ply and finished in 4mm Laminate of approved make & shade. All exposed edges should be consealed with 6mm Teak wood lipping/25x18mm Pvc beeding and polished. Openable shutters to be provided with shelves and all necessary hardware such as, S.S. Clip-on Auto close Hinges, S.S. Handle, Lock of approved make & finish, Magnetic Catcher, Tower Bolt, etc., all inside surfaces to be polished (granite (basic rate Rs.225 per sqft.) basic cost-Rs.225/- per sft).

Supply of Storges made from 19mm Hdf/Ply and finished in 1mm laminate / 4mm Veneer/paper veneer of approved make & shade. All exposed edges should be consealed with 6mm Teak wood lipping/25x18mm Pvc beeding and polished. Openable shutters to be provided with all necessary hardware such as, S.S. Clip-on Auto close Hinges, S.S. Handle, Lock of approved make & finish, Magnetic Catcher, Tower Bolt, etc., all inside surfaces to be polished.

a Depth 450 and height 675 SQM 5.00 8,500.00

in repro ( laminate finish)

b Depth 750 and height 750 SQM 5.00 16,500.00

in conference room (veneer finish)

c Depth 450 and height 750 SQM 5.00 8,750.00

Over Head Storage (laminate finish )

d Depth 450 and height 450 SQM 5.00 8,750.00

Full Height Storage (laminate finish )

e Depth 450 and height 1200 SQM 5.00 8,500.00

17 Ledges

a Laminate Ledges SQM 60.00 800.00

b Veneer Ledges in Conference Room SQM 5.00 1,000.00

18 Sofas with Storage

SQM 5.00 7,500.00

19

a Single seater Sofa Nos 10.00 12,000.00

b Doule seater sofa Nos 15.00 12,000.00

20 Tables

I Free standing table for travel

Nos 1.00 8,500.00

II Discussion Table

P&F of Side Ledge in meeting rooms /Repro / Conference room made from 19mm Plywood and finished in 1mm laminate / 4mm Veneer/ paper veneer of approved make & shade. 18mm x 18mm beech wood / Approved beading to be provided to top. All inside surfaces to be finished in Paint/malamine polish of matching color of Veneer /Laminate as per the drawing. The ledge to be supported by 1" SS pipe brackets & Ledges with 450mm deep.

Providing and fixing of Sofa with built in storage of size various lenthand 675htx550 with 100mm thick foam cushion for back and seat of approved fabric,made in 19mm HDF and finished in 1mm laminate of approved make & shade for the storage below . ( Base cost of fabric- Rs 250/m) Openable shutters to be provided with all necessary hardware such as, S.S. Clip-on Auto close Hinges, Lock of approved make & finish, Magnetic Catcher, Tower Bolt, etc., all inside surfaces to be polished as per design.

Providing and fixing of various sizes of sofa (single seat, double seat) finished with leatherite. Sofa seat should be rested on SS frame (25mmX25mm box section), supported with SS legs. SS frame beside the arm rests (for easthetic look) should be considered. Design is as regular seating sofa for all lounge areas.

Supply of Table : Size 1200x 600 x 750(H) made in 25mm MDF and finished in 1.0mm Laminate of approved make & shade, resting on SS pipe base of 75mm dia. 25mm x 18mm PVC / wooden beading of approved profile to be provided to edges of Top.

a Size - 1200mm dia, 750mm Ht ( Laminate) NOS 8.00 10,000.00

b Size - 1800 x 1200 ( Ply finished with Laminate Top ) NOS 12.00 18,000.00

c Size - 3000 x 1500 ( Ply finished with Laminate Top ) NOS 8.00 36,950.00

d Size - 2400 x 1200 ( Ply finished with Laminate Top) NOS 4.00 23,000.00

e Size: 7000 x 2000( Ply finished with Laminate Top) NOS 6.00 40,000.00

III

a Size: 5000 x 1800 Nos 2.00 35,000.00

b Size: 3600 X 1500 Nos 4.00 28,000.00

c Size: 2400 X 1200 Nos 4.00 22,000.00

Total (D) - for loose furniture / tables

E DOORS

1

Nos 90.00 41,000.00

P&F of Discussion Table with Top made of 12mm Toughened glass / Ply with Laminate Finish / Ply with Veneer Finish fixed on base made of ply finished with Laminate/ 4mm Veneer/ paper veneer of approved make & shade and SS pipes as per design . All tables to have flip top boxes with provision of wire termination for electrical and data points, all inside surfaces to be finished in Paint/ PU polish of matching color of Veneer /Laminate as per the drawing

P&F of Conference table / VC room table of following sizes made with 25mm plywood of approved make finished with paper Veneer/ 4mm veneer on all visible surfaces . All under edges of the tabletop to have 75mm wide band fixed towards the under side. Under side to have balancing laminate of .6mm of approved shade. The edges to be wrapped with veneer and polished . The base made of 19mm ply and fished with veneer of approved shade with inlay of 6mm x 6mm brushed SS as per the drawing enclosed. All interior vertical faces to be in Veneer. Tabletop veneer to be finished in PU Lamination polish of approved shade and all other veneer surfaces to be finished in melamine polish of approved shade. Provision of cable management as per drawing with flip tops resting on SS hinges and sound absorbing bushes.

Providing and fixing in position cabin doors of overall size 1000mm x 2400mm as per detail in drg. includes following.

100 mm x 50mm section beech wood frame shall be fixed to partition frame with steel screw. The job shall include 20mm x 40mm m.s. horizontal tie member to hold frame in floor.

Shutter with cutout for glass shall be made out of custom made bwp grade flush door of 48mm thick. Edge to have beech wood lipping. 1.0mm appd laminate shall be lined on both sides. Shutter shall be fixed with s.s. ball bearing hinges of 3mm thick of size 100 x 75mm (4 Nos.) and concealed door closer ( Dorma ITS-96 (3-6) must take weight up to 250kg, closer to have hold open mechnism) The job shall include providing and fixing heavy duty mortise lock with 1" throw dead bolt (s.s.) of Dorma make model no. TH-123 type-1 including mortise lock 711 and EP cylinder, armour front and brushed s.s. finish lever type handle, two layer of enviroseal and floor stopper (crescent moon shape, magnetic)

The job shall be completed by french polish of appd. colour and stain.

2 Nos 44.00 41,000.00

3

No 12.00 40,000.00

II Glazed Doors

1 Nos 2.00 37,000.00

2 Nos 2.00 37,000.00

3

3a D- (1200x2400mm) single sliding with sensor Nos 9.00 18,000.00

3b SD1-(2400x2400mm) Double sliding with sensor Nos 2.00 29,000.00

Same as above 1a, but entrance door of size 1200mm x 2400mm. Frame shall be as per item no 1a. Shutter with cutout for glass shall be made out of custom made bwp grade flush door of 125 x 48mm section stiles on all sides except bottom of 200 x 48mm. Edge to have beech wood lipping. 1.0mm appd laminate shall be lined on stiles. Central panel to have 8mm thick clear toughened glass fixed with beech wood beading (Doors with Green pee make & Hardwares with Dorma make).(Door closer with Dorma make & Handle & locks are Doorset make).

Providing and fixing in posItion entrance door shutter to toilet of overall size 1000mm x 2400mm as per detail in drg. Frame shall be existing at site of stone.

Shutter shall be made out of 48mm thick bwp grade flush shutter. 1.0mm thick appd laminate shall be lined on both sides. Edge to have beech wood lipping. S.S kick plate and push plate shall be fixed as detail. Powder coated Aluminium / beech wood louvers shall be fixed as detail. Shutter shall be fixed with s.s. ball bearing hinges of 3mm thick of size 100 x 75mm (4 Nos.) and concealed door closer ( Dorma ITS-96 (3-6) must take weight up to 250kg, closer to have hold open mechnism) The job shall include providing and fixing 450mm high s.s handle, lock, floor stopper etc complete.

The job shall be completed by french polish of appd. colour and stain.

Providing and fixing single leaf glazed doors of size1200 X 2400mm with top & bottom wooden rail of 150mm X 40mm in exposed steam beach wood section, polished in melamine matt finish with 12mm thk toughened glass in between as per drawing, supported with 12mmx18mm wooden beading from one side .Openable leave should be fixed to the floor and to the partition above with the help of heavy duty pivots of specified make including all necessary hardwares like Dorma Floor spring (BTS 80 V) &15mm dia S.S.Handles of 900mm length, of approved make and model.

Providing and fixing single leaf glazed doors of size1200 X 2400mm with SS Patch Fitting with 12mm thk toughened glass in between as per drawing, supported with SS u Clamp to the partition above with the help of heavy duty pivots of specified make including all necessary hardwares make Dorma 15mm dia S.S.Handles of 600mm length,Dorma floor spring (BTS 75 V).

Alloy/Jeb-Sliding Door-Single/Double panel glazed door shutter in Anodized aluminium finish with 10mm thick tempered glass insert with all alround Alloy glazing Alunimum System 60mm door system .the sliding door system will move on 2 rollers NK 80 .the price include adjustment bolts, pressure clamp, brake stop ,bottom guide etc.The fix portion will have 40x18mm section on all four sides.All complete as per design and drawing. Rate include proper wooden/MS supprot required above false ceiling

4 Nos 2.00 37,000.00

5 Nos 1.00 37,000.00

6 Nos 1.00 32,000.00

7 Nos 1.00 32,000.00

8 No's. 1.00 72,000.00

8a NOs 3.00 22,000.00

Providing and fixing single leaf glazed doors of size1200 X 2400mm with SS Patch Fitting with 12mm thk glass in between as per drawing, supported with SS Clamp to the partition above with the help of heavy duty pivots of specified make including all necessary hardwares make Dorma 15mm dia S.S.Handles of 600mm length, Dorma floor spring (BTS 75 V).

Providing and fixing single leaf glazed doors of size 1000 X 2400mm with SS Patch Fitting with 12mm thk toughened glass in between as per drawing, supported with SS u Clamp to the partition above with the help of heavy duty pivots of specified make including all necessary hardwares make Dorma 15mm dia S.S.Handles of 600mm length, of approved make and model. Including Doma Floor spring (BTS 75 V).

Providing and fixing single leaf glazed doors of size1000 X 2400mm with top & bottom wooden rail of 150mm X 40mm in exposed steam beach wood section, polished in melamine matt finish with 12mm thk toughened glass in between as per drawing, supported with 12mmx18mm wooden beading from one side .Openable leave should be fixed to the floor and to the partition above with the help of heavy duty pivots of specified make including all necessary hardwares like Dorma Floor spring (BTS 75 V) &15mm dia S.S.Handles of 900mm length, of approved make and model.

Providing and fixing single leaf glazed doors of size1000 X 2400mm with top & bottom wooden rail of 150mm X 40mm in exposed steam beach wood section, polished in melamine matt finish with 12mm thk toughened glass in between as per drawing, supported with 12mmx18mm wooden beading from one side .Openable leave should be fixed to the floor and to the partition above with the help of heavy duty pivots of specified make including all necessary hardwares like Dorma Floor spring ( BTS 75 V) &15mm dia S.S.Handles of 600mm length, of approved make and model.

Providing and fixing Double leaf glazed doors of size1800 X 2400mm with top & bottom wooden rail of 150mm X 40mm in exposed steam beach wood section, polished in melamine matt finish with 12mm thk toughened glass in between as per drawing, supported with 12mmx18mm wooden beading from one side .Openable leave should be fixed to the floor and to the partition above with the help of heavy duty pivots of specified make including all necessary hardwares like Dorma Floor spring ( BTS 75 V) &15mm dia S.S.Handles of 900mm length, of approved make and model.

Providing and fixing single leaf Patch Fitting Full glazed doors of size1200 X 2100mm with wooden panel finished with lamiante on the handel side (as per design) using 12mm thk toughened glass as per drawing, .Openable leave should be fixed to the floor and to the partition above with the help of heavy duty Floor Spring (Dorma or eq.) specified make including all other necessary hardwares like Dorma Door closure &15mm dia S.S.Handles of 400mm length, of approved make and model. Location: all main doors to enclosed office areas.

8b NOs 3.00 22,000.00

9

9a Nos 3.00 22,000.00

9b Nos 3.00 23,000.00

Total (E) - for Doors

F WALL PANELING

1 Rmt. 300.00 150.00

2 Sqm 1,450.00 2,080.00

3 Sqm 300.00 1,200.00

Providing and fixing single leaf Patch Fitting Full glazed doors of size1050 X 2100 mm with wooden panel finished with lamiante on the handel side (as per design) using 12mm thk toughened glass as per drawing, .Openable leave should be fixed to the floor and to the partition above with the help of heavy duty Floor Spring (Dorma or eq.) specified make including all other necessary hardwares like Dorma Door closure &15mm dia S.S.Handles of 400mm length, of approved make and model. Location: to office areas and cafe,

Flush Doors with Vision panel finished with laminate on both side

Providing & fixing of 900mm x 2100mm size door with wooden  Frame : Using 32 mm Thk. Solid core water proof flush door shutter having 1mm thick laminate on both sides as shown in the drwg shall have a vision panel with 6mm clear glass with 12mmx25mm wooden beading. The frame of the door to be wrapped with laminate on all exposed sides.The door should include all necessary hardwares like 3 Nos heavy duty brushed steel hinges with  counter sunk screws, mortice lock, SS handles, door stopper , door closer of approved make & model. Location: All Cabins and meeting room, pantry and store room doors

Providing & fixing of 1000mm x 2100mm size door with wooden  Frame : Using 32 mm Thk. Solid core water proof flush door shutter having 1mm thick laminate on both sides as shown in the drwg shall have a vision panel with 6mm clear glass with 12mmx25mm wooden beading. The frame of the door to be wrapped with laminate on all exposed sides. The door should include all necessary hardwares like 3 Nos heavy duty brushed steel hinges with  counter sunk screws, mortice lock, SS handles, door stopper , door closer of approved make & model. Location: All confernce Room doors

Providing and fixing in position 100mm high s.s laminate / approved laminate skirting as per detail in drg. Hardwood frame shall be fixed to wall. 12mm thick bwp Ply wrapped with 18 gauge s.s sheet shall be fixed on it. Hard wood frame shall be paid in separate item.

Laminate Wall panelling with Skirting: Providing and fixing Laminate paneling on wall framing shall be made with 50mm strip of 18mm Ply at 600mm x 600mm standard grid frame to be covered with 12mm ply finished with laminate of 1. mm of approved shade and make.Top edge of paneling to be covered with 75x 12 mm white beech/ approved wooden beeding fished in melamine polish/ Duco Paint. Also the partition will be provided with 75mm high metalic laminate skirting.

Veneer Wall panelling: Providing and fixing veneer paneling on wall framing shall be made with 50mm strip of 18mm Ply at 600mm x 600mm standard grid frame to be covered with 12mm Ply finished with veneer. The veneer to be finished with PU polish of approved shade.Top edge of paneling to be covered with 25x35 mm white beech/ approved wooden beeding finished in melamine matt polish matching to the veneer.

4 Sqm 10.00 4,000.00

5 Sqm 15.00 2,000.00

6 Sqm 100.00 600.00

7 Sqm 20.00 1,000.00

8 Sqm 140.00 900.00

Total (F) - For Panelling

G OTHER MISC. ITEMS

1 Rmt. 400.00 650.00

1a Rmt. 30.00 750.00

2 Sqm. 500.00 1,000.00

2a Same as above, but plain film without any pattern. Sqm. 50.00 750.00

2b Same as above, but 3M coloured film ( Geranium Red -3D-4780) Sqm 20.00 800.00

3 Sqm 130.00 1,500.00

4

a Appd laminate Sqm 10.00 3,500.00

Column paneling: with 12mm thick and 50 mm wide section of HDF as frame and 12mm hdf on top finished with 1mm Laminate of approved shade .The paneling shall extend to a height of 100mm above the false ceiling. Grooving to be provided as per drwg.

Column paneling: with 12mm thick and 50 mm wide section of HDF as frame and 12mm hdf on top finished with 4mm veneer of approved shade .The paneling shall extend to a height of 100mm above the false ceiling. Grooving to be provided as per drwg.

Duco painted paneling: with 12mm thick and 50 mm wide section of HDF as frame and 12mm hdf on top finished with Duco paint of approved shade .The paneling shall extend to a height of 100mm above the false ceiling. Grooving to be provided as per drwg.

Providing and fixing of Veneer ceiling made in 50x50mm salwood frame forming 600x600mm grid,taking support form true ceiling, with 12mm MDF with veneer of Approved shade and make including melamine polish as per design.

Providing and fixing of laminate ceiling made in 50x50mm salwood frame forming 600x600mm grid,taking support form true ceiling, with 12mm MDF with Laminate as per design.

Providing and fixing in position pelmet of overall size 200mm x 150mm as per detail in drg. Basic structure shall be made out of G.I. (Refer item no 01 of gypsum ceiling). 18mm thick Comm ply painted with plastic emulsion paint shall be fixed on it, to receive blinds channel. The job shall include supports (G.I. / Al / wooden section) from adjacent wall / true ceiling / slab.

Same as above , but making box type pelmet in meeting rooms with openable shutter at bottom including all hardwarwe. (Size 250mm x 200mm).

Providing and fixing in position 3M frosted film in approved designer pattern,( Horizontal lines as per drg.) stone blasted look) over glass as per design. The job shall be done as per manufacturer's specification (Square or rectangle area of film shall be measured for billing).

Providing and fixing opaque Digital prints as per design on 3m film on partitions a. 3M certification to be provided.(Graphic basic rate-Rs.350/- per sft)

Providing and fixing in position laminate/ wood panelling on window cills and facia bands as per detail in drg. Hard wood frame shall be fixed with rawl plug and screw. 9mm & 6mm thick bwp ply shall be fixed on it. 1.5mm thick appd laminate shall be lined on it. jams to have beech wood of 20mm thick. The job shall include filling clear silicon with backer rod between glazing and cill top.

The job shall be completed by french polish of appd. colour and shade on it. (Surface area of laminate / wood shall be measured for billing).

b beech wood Sqm 10.00 2,500.00

5 Sqm. 200.00 4,500.00

6 Sqm. 10.00 600.00

7 Same as above, but extra for fixing 12mm thick bwp ply on frame. Sqm. 130.00 600.00

8 Sqm 120.00 1,850.00

9 Sqm. 50.00 2,500.00

10 Sqm. 100.00 1,000.00

11 Same as above, but non magnetic MARKER board. Sqm. 20.00 1,000.00

12 Nos 70.00 1,500.00

13 Nos 50.00 50.00

14 Sqm 450.00 4,500.00

15 Rmt 100.00 450.00

Providing and fixing glass panelling for writing board consisting of 8mm clear toughened glass with polished edges fixed over white vinyl and 3M frosted film / Sain gobain lacquered glass over BWP ply fixed on GI frame work of partitions (Frame work payable separately) including filling the gap/ joints with clear non-staining silicone etc. complete. fixed with s.s. studs as per detail in drg.

Providing and fixing in position M.S framing for different additional works as per detail in drg. 50mmx25mm section galvanised M.S pipe ( 18 Gauge) shall be fixed to wall at 600mm c/c bothways with rawl plug & screw in line & level to receive panelling.

Providing and fixing in position laminated shutter for electrical cabinet & other misc works shall be made of 19mm thick bwp ply with beech framework of 2" x 2" for fixing the shutter and also with the aluminium powder coated lowers should match the laminate color / approved color. The shutter shall be finished with 1.5mm thick appd laminate on outside and painted on inside, edges of ply shall be lipped with beech wood lipping. The job shall include SS hinges (75mm high), magnetic catchers, french polish of approved stain etc. complete. (Aluminum louvers to be provide with powder coating).

Providing and fixing in position frameless mirror as per detail in drg. 12mm thick marine ply shall be fixed to wall with rawl plug & screw. 8mm thick mirror with machine grinded and polished edge shall be fixed on it with 3M both side tape and s.s beading at periphery. Hard wood, if required shall be paid in separate item.

Providing and fixing 18mm thick white MARKER P3-Ceramic board (magnetic) of approved make including providing and fixing beech wood beading of 25mm thick size, fixing arrangement, French polishing complete all as shown in drawing. The job shall include making 4" wide ledge at bottom of BWP ply, finished in beech veneer melamine polished.

Providing and fixing in position trap door for services in gypsum / POP ceiling. The panel should be of modular with chain to hang when it is in openable position.

Receiving and fixing signages of different sizes on wall / partition with necessary arrangement for fixing as required.

Providing and fixing in position Appd. Lacquered glass (Saint Gobain / Equallant) on column and Misc detail as per drg. Base shall be made out of hardwood and 12mm bwp ply. 6mm thick coloured Lacquered glass shall be fixed with saint Gobian adhesive. The job shall include s.s / anodized aluminium profiles (approved standard make)edging.

Providing and fixing in posItion s.s column guard of 50mm x 50mm as per detail in drg. Base shall be made out of hardwood and bwp ply. 1.5mm thick s.s angle of 50mm x 50mm shall be wrapped on edge as detail ( In one piece ).

16 Sqm 170.00 2,000.00

16a Sqm 100.00 2,000.00

17 Rmt 50.00 900.00

18 Sqm 50.00 8,000.00

18a Sqm 25.00 8,500.00

18b Sqm 40.00 8,500.00

19 Sqm 200.00 1,500.00

19a Sqm 50.00 750.00

20 Sqm 200.00 1,800.00

20a Rmt 50.00 850.00

20b SQM 1,000.00 1,400.00

21 Rmt 90.00 300.00

22

Providing and fixing in position Removable Glass panelling with vinyl graphic at back as per detail in drg. Base shall be made out of hardwood and bwp ply. 8mm thick clear toughened glass with vinyl graphic at back ( Vinyl Graphic shall paid in separate item ) Shall be fixed with s.s studs to make it removable for changing of graphics.

Extra on item No 16, for Vinyl graphic of basic rate Rs 2500/- per sqm.

Providing and fixing in posItion 100mm x 100mm x 4mm section s.s T with bevelled top edge in expansion joint. It shall be fixed with adhesive to one side of joint.

Providing and fixing in position Pantry counter of 600mm deep as per detail in drg. Basic structure shall be made out of hard wood frame and BWP Ply. All the internal & external surfaces of drawer and shutters shall be lined with 1.5 mm thick appd laminate. Top to have 12mm thick corian with moulded edge, Edge of ply to have beech wood lipping. The job shall include s.s hinges, handles, catcher, runner for drawer, laminated shelves,wire manager, multipurpose lock, and laminate lining on all inside surfaces etc complete. ( Elevation area to be measured for billing ).

Same as above, but overhead cabinet of 450mm deep without corian work. Finish shall be laminate on all internal and external sides.

Same as above, but full height storage unit in board room & other misc areas of 450mm deep as per detail in drg . All the exposed surfaces shall be lined with appd 1.0mm laminate. Internal surfaces to have 1.0mm laminate.

Providing and fixing in position 1.8mm thick antistatic vinyl flooring of Technic EL-5 or approved equivalent & of appd. Colour/ shade. It shall be fixed as per manufacturer's specification. Make: LG / Armstrong / Equallant

Same as above, but non antistatic 1.8mm thk vinyl floor. LG / Armstrong / Equallant

Providing and laying 8mm thk (EN-13329) laminate floor of appd. shade ( as approved)including accessories (class use of 23/33, AC-5 with 0.2mm thk direct pressure laminate on top) and groove construction with edge impregnated with seal to secure long lasting joints secured together with the help of suitable glue confirming to EN 13329. ( Basic rate of laminated flooring shall be Rs 1600/- per Sqm FOR at site) Make: TESSA / PERGO / ARMSTRONG

Same as above but edge profile and skirting of same material with moulded edge.

Providing and fixing textured loop carpet tile in cabins, meeting rooms and conference rooms as directed by the project Incharge. Cost inclusive of shifting, cleaning the room, gloove charges, covering the carpet with plastic sheet to avoid damages, labour charges etc., as a finished item of work. Basic cost of carpet tile is Rs. 100 / SFT. Approved makes SHAW / Equallant

Providing and fixing of 25mm wide stainless steel T section Flashing, 1mm thk confirming to 316 grade as covering for the junctions of all hard floorings and carpets or as directed etc. complete.

Providing & fixing in position3mm thk GI cover plate in powder coating matching to the floor tile colour.

b. 400MM X 400MM Nos 60.00 1,000.00

a. 300MM X 300 MM Nos 132.00 750.00

c. 150MM X 150MM Nos 140.00 500.00

24 Sqm 80.00 1,000.00

25 SQM 50.00 2,800.00

26 Sqm 50.00 2,550.00

27 Sqm 100.00 2,000.00

28 Sqm 50.00 1,000.00

29 Sqm 20.00 1,000.00

30 Sqm 150.00 450.00

31 RMT 200.00 100.00

32 Nos 24.00 3,000.00

33 Nos 12.00 2,000.00

34 RMT 30.00 2,500.00

35 RMT 10.00 2,500.00

36 No's. 6.00 4,500.00

37 SQM 10.00 2,500.00

38 No's. 50.00 1,700.00

39 Pin up Board :-

Providing and fixing in position ply boxing 150 to 300mm deep as per detail in drg. Base shall be of adequate hardwood frame.12mm thick bwp ply ply shall be fixed on it.for providing & fixing 1.0mm laminate on it with 6mm bwp ply backing with grooves.

P&F vitrified tiles for cladding with Cement mortar 1:4 including all necessary labour charges, lead and lifts. Basic cost of tiles - Rs. 150 / SFT

P&F Bisaza tiles for cladding with Cement mortar 1:4 / as per the manufacturers specifications including all necessary labour charges, lead and lifts. Basic cost of tiles - Rs. 200 / SFT

Glass Shelves of 12mm glass with edge polished rested with suitable SS clamp.

colour back Glass Shelves of 12mm glass with edge polished with approved color and as per design.including brackets upto 300mm deep.

Colour back glass of 8mm with edge polish fixed with ss stude on the wall and partition

Providing and fixing of Temperary Gypsum Board Partion with GI section and paint finishing as per site requriement.

Providing and fixing of " compression seal " between the door stop and frame of single / double swing doors fixed in groove / adhesiveas per approved manufacturar Specification.

Providing and fixing of stand alone board made in white marker board of size 3'x6', stand made in MS powader coated sections, any standard make is acceptable

Providing and fixing of stand alone pinup board made in ply wood frame work and both sides fabric wrapped soft boardof size 5'x4'.(basic cost of fabric Rs.350/-per M) with Velvet Fabric.

Providing and fixing of steps for false flooring,width of 300mm treads, 150mm risers made in 19mm BWP ply with 1.5mm laminate, 50x50mm wooden frame with required hardwares and accessaries.

Providing and fixing of ramp for false flooring, made in 19mm BWP ply with 1.5mm laminate, 50x50mm wooden frame forming a grid of 600X600mm grid with required hardwares and accessaries.Width of the ramp 1200mm

Providing and fixing of Key storage rack made in 2" frame of 19mm ply with laminate finish and glass, with two shutters, SS key hangers, including all necessery hardware. Size - 2'X 3'

Supplying and placing in position of polished granite (basic rate Rs.225 per sqft.) pebbles @ depth of 2", as per architect's instructions. Size of the pebbles shall be from 15 mm to 25 mm, all colours to be supplied as per architects approvals.

Supply of SS brushed finish,foot press swing type dustbins of capacity 10 liters.

a Sqm 280.00 850.00

b Sqm 100.00 4,000.00

c Sqm 10.00 1,000.00

d RMT 3,500.00

e Nos 5,000.00

f SQM 25.00 1,250.00

43 SQM 50.00 3,000.00

44 SQM 900.00 1,100.00

45 SQM 5.00 20,000.00

46 No's. 10.00 5,000.00

47 Nos 15,000.00

Designer pin up boards: 1800mm x 900 fabricated with 12mm thk soft board 450 x 900 with fabric as per design mounted on a frame of 12mm ply finished with laminate of approved shade with 10% of metallic laminate. ( Base cost of fabric- Rs 250/m ) (Pinup & soft boards should be gripper system).

Pin up boards: Providing and fixing Pin up boards fabricated by using PVC grippers of approved profile and having an infill of Soft Board material with 2 mm thick foam sheet on top and finally wrapped with the fabric of deisred shade/make. ( Base cost of fabric- Rs 250/m ) (Pinup & soft boards should be gripper system).

Screen Partition: Providing and fixing 1500 mm high screen partition, made of Aluminium framework,, 12 mm ply and finished with 1 mm laminate on all exposed surfaces, Rate shall include decorative/ textured glass and 12 mm thick MDF fret work, duly painted in DUCO paint, infil panels with in partition and 50 mm dia SS poles at ends, complete.

Running counters in Cafeteria: Providing and fixing standing/running eating counter with necessary support SS leg and frame work, the top made of 25 mm thick ply finished with 1 mm thick laminate with Post formed front edges.

Stall/ Display Counter with glass shutters and glass shelves (12 mm toughened) and 18 mm ply body finished with laminate all sides complete with all necessary hardware. (Size : 2400mm X 1200mm X 750mm)

FRP Sheeting: Providing and fixing the FRP sheeting 4mm thick wih GI frame support for the external windows to protect the work area from water as a temporary work and as directed by the Project Inharge.

P&F Aluminum Powder coated Partition - To make cages in required locations. The partition should be made of Aluminum pipes / box sections not less than 40MM in size at 150 mm spacing in only one direction. After fixing of the framing the cage should be covered with Aluminum welded mesh of 5 mm thick and the spacing should not be more than 50mm. All the members should be powder coated as per the Architect / Engineer incharge directions. The Partiion should be from true ceiling to true flooring.

Providing and Fixing of 100% block out Vertical blinds - VISTA / MAC make. Basic cost of blinds - Rs 100 / SFT

Providing and Fixing of 2 hours fire rated glass with all necessary fire rated frames including all accessiries and labour charges, sizes as per the actual requirement and as per the available standard sizes.

Providing & fixing temparary Doors (Un finished)with Door Jamb and all necessary hardware like aldrop, hinges, lock etc including all labour charges as a finished item of work.

P&F cash counters of size 1200MM X 1200MM (L shape) of 750MM height with a drawer unit. Finished with laminate (inside and out side).

48 Nos - 200,000.00

49 Nos 75,000.00

50 Nos 100.00 750.00

51 Nos 60.00 4,000.00

52 Rmt 350.00 150.00

53 Rmt 80.00 5,500.00

54 Nos 60.00 3,500.00

55 Sqm 30.00 4,000.00

56 Nos 5.00 1,995.00

57 Sqm 10.00 350.00

58 Sqm 100.00 150.00

TOTAL (G) - for Misc Items

Main Entrance table: Providing & Fixing of 4500x750x1200 Main Entrance table with ply finished in Corian top and veneer on side, front, and top, steel inlay on front and 12mm toughened glass on top supported with SS brackets and studs as per drawing. Rate also to include the cost of 2 nos. storage unit 450x450x750 made of plywood and finished in laminate and keyboard tray. All internal surfaces to be finished in balancing laminate.all visible veneer to be finished in PU Lamination polish of approved shade and all other veneer surfaces to be finished in melamine polish of approved shade. Provision of cable management as per drawing with flip tops resting on SS hinges and sound absorbing bushes.( Corian basic cost Rs.1000/- per sft)

Reception Table: Providing & Fixing of 2400 x 750 x 1200 Reception Table with ply finished in 4mm Veneer. Rate also includes 1no. Pedestral & side table made of ply and finished in 4mm veneer. All internal surface to be finished with balancing laminate. All visible veneer to be finished in PU polish of approved shade and all other veneer surfaces to be finished in melamine polish of approved shade. 20 SFT of Italian marble to be considered by the vendor. BAsic cost of Veneer - Rs 150 PSFT, Italian marble - 500 PSFT.

Providing and fixing Duster stand made out of GI powder coated, to be fixed to partition with sunk screws.

Trap Doors: Providing and fixing in position modular trap door 600mm x 600mm to access the true ceiling and to access the services above gypsum ceiling. Make: VM ceilings, Vishal Benkin, Danogips.

Aluminium profiles: Providing and fixing of Aluminium profiles in 6mm grooves around White lacquared board & Fabric Panels

Running Counter: Providing and fixing running counters to be fabricated out of 19mm thk ply of 600mm width with 1mm thk laminate on top and all sides including 19mm ply boxing for wire management with 1mm Laminate of approved color & shade. Fixing of 8mm toughened glass with SS "D" brackets on the top of the running counter and 3M film to be apply on the glass. Providing & fixing of Key board trays & duster stand to the running counter.

Urinal Glass Partition - Providing & fixing 8mm plain glass for urinal partition with ss clamps to the wall.

Pin up boards: Providing and fixing Pin up boards fabricated by using PVC grippers of approved profile and having an infill of Soft Board material with 2 mm thick foam sheet on top and finally wrapped with the fabric of deisred shade/make. ( Base cost of fabric- Rs 500/mtr ) (Pinup & soft boards should be gripper system).

Wooden Door Frames: Providing & fixing of wooden rail of 150mm X 40mm in exposed steam beach wood section, polished in melamine matt finish for glazed doors

Removing of Aluminium frame, Ply with laminate, Toughened glass including beach wood frame, Gypsum board, soft board, writing board, flush doors including door frame, glass door including door frame, wall paper.

Dismantling of Gypsum ceiling and shifting the debris from the site.

H POP & PAINTING WORK

1 Sqm. 2,000.00 180.00

2 Sqm 1,500.00 55.00

3 Sqm. 16,000.00 152.00

3a Same as above, but accent paint of dark colour Sqm 600.00 160.00

4 Sqm. 100.00 750.00

5 Providing applying duco painting

a) white or any desired colour Sqm. 20.00 800.00

b) Metallic colour Sqm. 20.00 1,000.00

6 Sqm. 10.00 700.00

7 Sqm 20.00 200.00

H TOTAL (H) - for POP & PAINTING WORK

GRAND TOTAL (A+B+C+D+E+F+G+H)

Providing and doing POP punning on wall (average 12mm) to make surface smooth in line and level at all heights. The job shall including hacking the existing surface to make proper band.

Providing and doing Gyp plaster on brick wall and rcc surface of required thickness to get proper right angle, plumb, line and level . The job shall include wire mesh on joints of RCC & brick wall, making groove, if required anywhere . The job shall be done as per Gypsum India specification .The job shall also include chipping in brickwork, if required to get right angle, plumb etc.

Providing and doing three or more coat of acrylic emulsion paint on Gypsum/ POP surface as per approved colour and shade. The job shall include doing sand papering primer coat and putty filling preparation of the surface etc. complete. The job shall be done as per manufacturer's specification.

Providing and applying two tone paint of appd. colour, mix and shade on gypsum/POP as per sample on colour board. The job shall include doing primer, putty filling etc. complete. The job shall be done as per manufacturer's specification. ( Basic rate by company applicator @ Rs 700/- per Sqm).

Providing and doing okios, graphic paint ( Basic rate by company applicator @ Rs 700/- per Sqm). The job shall be done as per manufacturer's specification .

Providing & fixing in position appd wall paper of basic rate Rs 165/- per sqm FOR at site. The job shall include making base with putty & primer as per wall paper manufacturer's specification.

Annexure

Date- 23 April 2014

Currency in INR

Amount RA 1 Amount

4,760,000.00 669.2122 455,064.30

-

- -

- -

- -

- 315,000.00

- 45,000.00

- 75,000.00

- 5,195,000.00 455,064.30

RA 1 Qty

1,815,000.00 2,200.00 1,815,000.00

700,000.00 879.79 615,853.00

1,600,000.00

-

3,120,000.00 1280.93 2,664,334.40

30,000.00

- 110,000.00 110.00 110,000.00

50,600.00

- 44,000.00

- 150,000.00

- 80,000.00

- 2,310,000.00 798.32 838,236.00

60,000.00

- 52,500.00 21.87 22,963.50

36,000.00

10,158,100.00 6,066,386.90

100,000.00

- 30,000.00

- 38,400.00

- 15,000.00 - 16,800.00 - 84,000.00

-

3,450,000.00 125.2075 575,954.50

138,000.00 -

80,000.00

3,952,200.00 575,954.50

- 315,000.00 - -

- 315,000.00 - - - -

- 450,000.00 - 72,000.00

-

-

- -

- -

- 810,000.00

- -

-

-

- -

- -

- -

- -

- -

- - - -

-

42,500.00 - - - 82,500.00 - - - 43,750.00 - - - 43,750.00 - - - 42,500.00 - - - -

- 48,000.00 - 5,000.00 - - - 37,500.00

- -

- 120,000.00 - 180,000.00 - - - - - 8,500.00

- - -

-

- 80,000.00 - 216,000.00 - 295,600.00 - 36950 4567.02 41517.02 6019.968 92,000.00 - 4618.75 240,000.00 - -

- 70,000.00 - 112,000.00 - 88,000.00

3,809,600.00

-

-

-

- 3,690,000.00

29 1,189,000.00

1,804,000.00

- -

- -

- 480,000.00

- - - 74,000.00

- 74,000.00

- -

- 162,000.00 - 58,000.00 -

74,000.00

- 37,000.00

- 32,000.00

- 32,000.00

- 72,000.00

- 66,000.00

-

66,000.00

- -

- 66,000.00

- 69,000.00

- 6,856,000.00 1,189,000.00

45,000.00

- 3,016,000.00

- 360,000.00

-

40,000.00

- 30,000.00

- 60,000.00

- 20,000.00

- 126,000.00

- 3,697,000.00 -

- 260,000.00 158.38 102,947.00

22,500.00

- 500,000.00

- 37,500.00 - 16,000.00

- 195,000.00

- -

- -

- 35,000.00 -

25,000.00 - 900,000.00

- 6,000.00

- 78,000.00

- 222,000.00

- 125,000.00

- 100,000.00

- 20,000.00 - 105,000.00

- 2,500.00

- 2,025,000.00

- 45,000.00

-

340,000.00

- 200,000.00

- 45,000.00

- 400,000.00

- 212,500.00

- 340,000.00

- 300,000.00

- 37,500.00

- 360,000.00

- 42,500.00

- 1,400,000.00

- 27,000.00

- -

-

60,000.00 - 99,000.00 - 70,000.00 - 80,000.00

- 140,000.00

- 127,500.00

- 200,000.00

- 50,000.00

- 20,000.00

- 67,500.00

- 20,000.00

- 72,000.00

- 24,000.00

- 75,000.00

- 25,000.00

- 27,000.00

- 25,000.00

- 85,000.00

- - -

238,000.00

- 400,000.00

- 10,000.00

- -

- -

- 31,250.00

- 150,000.00

- 990,000.00

- 100,000.00

- 50,000.00

- -

-

-

- -

- 75,000.00

- 240,000.00

- 52,500.00

- 440,000.00

- 210,000.00

- 120,000.00

- 9,975.00

- 3,500.00

- 15,000.00

- 12,826,225.00 102,947.00

360,000.00 590.4642 106,283.56

82,500.00

- 2,432,000.00

- 96,000.00 - 75,000.00

- - - 16,000.00 - 20,000.00 - 7,000.00

- 4,000.00

- 3,092,500.00 106,283.56 49,586,625.00 8,495,636.25

47536.995942.123 7130.548