media - vogelfiles.vogel.de/vogelonline/vogelonline/files/5337.pdf · news energy vehicle: ev, fuel...
TRANSCRIPT
Media2014D a t a
»Auto Production« »Auto & Parts«
» A u t o m o b i l e I n d u s t r y C h i n a – A I C h i n a «
Portrait� 2
automobile industry China – ai China the leading trade journal of the automotive industry in China – since 2006.
Automobile Industry China – AI China is the Chinese edition of Automobil Industrie. It is produced in China, for China, with content from China. To better meet the needs of the readers of AI China, the magazine has appeared on a rotating 2-week schedule since 2010, whereby Auto Production is distributed as one issue of AI and Auto & Parts as the next.AI China lets you reach the key decision makers across the entire value-added chain. With a reader base of over 100,000, the right recipients are defined for each issue in accordance with the principle of "topic-oriented alternating distribution".
auto ProductionFrom development, design, production, and logistics to management and economics issues. Readers include automotive manufacturers, suppliers, outfitters, and service providers at the decision-making level.
Frequency: Every 4 weeksCirculation: 26,500 copies per issue.
auto & Parts Internationally advanced design technologies for vehicles and components as well as practical applications and the development trend of components. Special attention is paid to the application and development of vehicle electronics.
Frequency: Every 4 weeksCirculation: 26,500 copies per issue.
Vogel Business Media has been active in China since 1996.www.vogel.com.cn
StruCtural analySiS oF SubSCriberS� 3
»auto Production«Department & title
»auto & Parts«Department & title
industryPrototyping
7 %
Automobile Industry31%
Auto Parts Industry53%
Aircraft and Spacecraft
Aviation Manufacturing
Industry2 %
Motorcycle Manufacturing
4 %
Scientific Research and Engineering
Design3 %
industryAuto Repair
8 %
Automobile Industry41%
Auto Parts Industry38%
Automobile and Parts Sales
9 %Scientific
Research and Engineering
Design3 %
Others1 %
Technology / Design / Production Development Department
18 %
Production / Manufacturing Department
25%Power Equipment Department
12%
General Manager / Director / President / Factory Director
10 %
Quality Management / Quality Control Department
8%
Purchase Department / Service Department
16%
Others3%
Information / IT Department
1%
Institute / University3%
Planning Department / Development Department
4 %
beneFitS For you� 4
Focused on the target group: »Automobile Industry China« is geared toward meeting the needs of automotive manufacturers, suppliers, out-fitters and service providers at the decision making level.
High value for the reader and broad spectrum of topics: Ongoing reportson all important submarkets cover the entire value chain of the automoti-ve industry. From development, design, production, and logistics to ma-nagement and economics issues.
High circulation: 26,500 copies per issue
experienced background: Automobile Industry China is the Chinese editionof the international magazine Automobil Industrie that belongs to GermanVogel Media Group and is being published for more than 50 years.
always up-to-date: »Automobile Industry China« is published every fourweeks and is supplemented by an established Web site (auto.vogel.com.cn) with daily updates.
DateS anD toPiCS 2014� 5Issue Title Date Main Topics
1 Auto & Parts PD: 15.01.AD: 03.01.
Features Drivetrain Safety Material
Review of Automotive Innovation Technologies 2013
R & D of Gasoline/ Diesel Engine & Hybrid / EV Power, Transmission, Retarder and Clutch
A/P Safety System, Safety Defend System, Integrited Safety, ACC System, Drive Assistance System, Safety Design, etc.
Light-structure Materials, Macro-molecule Materials, Functional Materials, Steel Microblog / Wechat & Iorn, Aluminum Alloy, Magnesium Alloy, Testing
1 Auto Production PD: 27.01.AD: 17.01.
Powertrain Manufacturing (Engine Manufacturing)
2 Auto Production PD: 14.02.AD: 05.02.
Metal Working (Transmission manufacturing)
3 Auto Production PD: 25.02.AD: 14.02.
Plant Automation (Sensor)
2 Auto & Parts PD: 10.03.AD: 28.02.
Features Electronics Chassis Design & Development
Innovative Sensor Technologies and Applications
Powertrain/ Chassis/ Body & Conve-nience/ Safety / Infotainment Electri-cal & Electronics, Drive Assistance, Light & Communications, GPS, Ca-bles, Sensors, Semiconductor Solu-tions, Testing
Brakes, Steering, Power Distributi-on, Chassis Control Systems, Tires, etc.
R & D of New Vehicle Models/ New Parts/ New Technologies, C-technology Application, Simula-tion, PLM, etc.
Supple-ment 1
Auto Production PD: 31.01.AD: 20.03.
Auto Parts Manufacture
3 Auto & Parts PD: 08.04.AD: 28.03.
Features Engine / TurboCharger Supercharger Interior Repair and Maintanance
Automatic Transmission Technologies
R & D of Gasoline/ Diesel Engine & Turbocharger and Supercharger, etc.
Inner Door Skin, Interior of Door Pillar, Seat & Components, Central Control Board, Lightweight Interi-or/ Materials, NVH, Testing, etc.
Automotive Repair and Main- tanance, Automotive Testing and Diagnostics, etc.
4 Auto & Parts PD: 15.04.AD: 05.04.
Features Design & Development Electronics / HMI Testing Technologies
Powertrain System of New Energy Vehicles
R & D of New Vehicle Models/ New Parts/ New Technologies, C-technology Application, Simulation, PLM, etc.
Human-Machine Interface Vehicle Testing & Development, Environmental Testing, EMC, NVH, Engine/ Chassis Dynos, Product Safety, etc.
4 Auto Production PD: 05.05.AD: 25.04.
Shop Automation (RFID)
DateS anD toPiCS 2014� 6Issue Title Date Main Topics
5 Auto Production PD: 30.05.AD: 20.05.
Die and Mold Design and Manufacturing (Precission Machining)
5 Auto & Parts PD: 30.05.AD: 18.05.
Features Drivetrain Exhaust Technology Safety
Start-Stop System and applications
R & D of Gasoline/ Diesel Engine & Hybrid / EV Power, Transmission, Retarder and Clutch
Tail-gas Emissions and Control, Treatment for Exhaust Gas, DPF, Simulation Technology, SCR Systems, etc.
A/P Safety System, Safety Defend System, Integrited Safety, ACC Sy-stem, Drive Assistance System, Safety Design, etc.
6 Auto Production PD: 05.06.AD: 26.05.
Welding and Cutting (Laser Processing)
7 Auto Production PD: 16.06.AD: 05.06.
Automobile Processing Valuable Handbook (Gearbox Machining)
6 Auto & Parts PD: 30.06.AD: 20.06.
Features Design & Development Electronics / Lighting Technology Chassis
Diesel Engine and Exhaust Techno-logies for Commercial Vehicles
R & D of New Vehicle Models/ New Parts/ New Technologies, C-technology Application, Simulation, PLM, etc.
Exterior Lighting, Interior Lighting, and Relative Control Circuit, Light Switchs and control computer
Brakes, Steering, Power Distributi-on, Chassis Control Systems, Tires, etc.
8 Auto Production PD: 30.06.AD: 20.06.
Body Manufacturing Engineering (Welding Engineering)
Supple-ment 1
Auto & Parts PD: 10.07.AD: 01.07.
Special for New Energy Vehicle Technology News Energy Vehicle: EV, Fuel Cell Vehicle and Hybrid Vehicle - Industrial Analysis, News, Editorial Comment, and New Products/New Technologies and Latest Application, Discussing Core Technologies, including Battery, Motor and Electronic Control System etc. and the Trends of the Industry
7 Auto & Parts PD: 30.07.AD: 18.07.
Features Body and Interior & Exterior Safety Testing Technologies
Advanced Gasoline Engine Technologies
Body, Sunroof, Inner Door Skin, Interior of Door Pillar, Seat & Components, Central Control Board, Lightweight Interior/ Materials, NVH, Testing
A/P Safety System, Safety Defend System, Integrited Safety, ACC System, Drive Assistance System, Safety Design, etc.
Vehicle Testing & Development, Environmental Testing, EMC, NVH, Engine/ Chassis Dynos, Product Safety, etc.
9 Auto Production PD: 30.07.AD: 21.07.
High Efficient Machining (Composite Processing)
DateS anD toPiCS 2014� 7
8 Auto & Parts PD: 18.08.AD: 05.08.
Features EV Technologies Chassis / Tire Design & Development
Telematics Technology Battery Technology, Fuel Cell Tech-nology, Electric Control System, Motor Driver etc.
Tire, Wheel, Wheel Hub, etc. R & D of New Vehicle Models/ New Parts/ New Technologies, C-technology Application, Simulation, PLM, etc.
10 Auto Production PD: 29.08.AD: 20.08.
Auto Parts Manufacture (Chassis and Transmission System Manufacturing)
9 Auto & Parts PD: 05.09.AD: 25.08.
Features Driver Assistant System Engine Exhaust Technology
Effective, Low Cost and Advanced Testing Technology
Driver Assistant System with Laser Radar, Microwave Radar and Ultrasonic Sensor, etc.
R & D of Gasoline/ Diesel Engine & Hybrid Power, Fuel Cell, Engine Management System, Electronic Control System, etc.
Tail-gas Emissions and Control, Treatment for Exhaust Gas, DPF, Simulation Technology, SCR Systems, etc.
Supple-ment 2
Auto & Parts PD: 25.09.AD: 15.09.
Special for Lightweight Technology Leightweight Technologies: Light Structure Design, R&D and Applications of Light Materials - Industrial Analysis, News, Editorial Comment, and New Pro-ducts/Discussing the R&D and Application of Light Structure Design, Super / Ultra Super Steel, Aluminium Alloy, Magnesium Alloy, Engineering Plastics etc.
Supple-ment 2
Auto Production PD: 30.09.AD: 19.09.
Four Processes
11 Auto Production PD: 15.10.AD: 08.10.
Body Manufacturing Engineering (Painting Engineering)
12 Auto Production PD: 30.10.AD: 20.10.
Increase Efficiency and Reduce Costs of Metalworking (Flexible Processing)
10 Auto & Parts PD: 30.10.AD: 20.10.
Features Testing Technologies Electronics Body and Interior & Exterior
Latest Active Safety Technologies Vehicle Testing & Development, Environmental Testing, EMC, NVH, Engine/ Chassis Dynos, Product Safety, etc.
Powertrain/ Chassis/ Body & Con-venience/ Safety / Infotainment Electrical & Electronics, Drive Assistance, Light & Communica-tions, GPS, Cables, Sensors, Semiconductor Solutions, Testing
Body, Sunroof, Inner Door Skin, Interior of Door Pillar, Seat & Com-ponents, Central Control Board, Lightweight Interior/ Materials, NVH, Testing
13 Auto Production PD: 04.11.AD: 24.10.
Automation and Logistics (Machine Vision)
Issue Title Date Main Topics
DateS anD toPiCS 2014� 8
11 Auto & Parts PD: 20.11.AD: 10.11.
Features Drivetrain System Chassis Safety
Automotive Repair and Diagnostic R & D of Gasoline/ Diesel Engine & Hybrid / EV Power, Transmission, Retarder and Clutch
Brakes, Steering, Power Distributi-on, Chassis Control Systems, Tires, etc.
A/P Safety System, Safety Defend System, Integrited Safety, ACC Sy-stem, Drive Assistance System, Safety Design, etc.
12 Auto & Parts PD: 05.12.AD: 25.11.
Features Repair and Maintanance Electronics Interior System/ Seating
Change and Challenge of Chinese Automotive After Market
Automotive Repair and Maintanance, Automotive Testing and Diagnostics, etc.
Powertrain/ Chassis/ Body & Con-venience/ Safety / Infotainment Electrical & Electronics, Drive As-sistance, Light & Communications, GPS, Cables, Sensors, Semicon-ductor Solutions, Testing
R & D of Seat assembly and com-ponents, HRS-Head Restraints Sy-stem, Seat Framework, Materials
14 Auto Production PD: 12.12.AD: 02.12.
Buyers‘ Guide
1/15 Auto Production PD: 30.01.AD: 20.01.
Powertrain Manufacturing (Engine Manufacturing)
1/15 Auto & Parts PD: 10.02.AD: 30.01.
Features Drivetrain Electronics Repair and Maintanance
Review of Automotive Innovation Technologies 2014
R & D of Gasoline/ Diesel Engine & Hybrid / EV Power, Transmission, Retarder and Clutch
Powertrain/ Chassis/ Body & Con-venience/ Safety / Infotainment Electrical & Electronics, Drive As-sistance, Light & Communications, GPS, Cables, Sensors, Semicon-ductor Solutions, Testing
Automotive Repair and Main- tanance, Automotive Testing and Diagnostics, etc.
Issue Title Date Main Topics
aDvertiSing PriCe liSt� 9
(Basis�Price�b/w)
Surcharges for Special Positions in €
Front�Cover 6,500.-�
Inside�Front�Cover/Back�Cover
5,300.-�4,600.-�
Back�Cover 5,900.-�
Advertising rate card No. 08 �������Effective�from�01.01.2013
total circulation:�� 26,500�copiesMagazine size:�� 210�mm�wide,�297�mm�high,�DIN�A4type area: 190�mm�wide,�270�mm�high
Automobile Industry China Advertisement Rates
Format� Width�×�Height�in�mm Price�4c�in�€
1/1�Page 210�x�297�mm 2,700.-�
Island�Page 133�x�190�mm 2,300.-�
1/2�Page 190�x�133�mm�94�x�270�mm
1,800.-�
1/3�Page 190�x�� 88�mm� 62�x�270�mm
1,300.-�
1/4�Page �94�x�133�mm190�x�� 66�mm
1,100.-�
Loose Inserts –�on�demand�–
Bind-Ins –�on�demand�–
Reductions3�x 6�x� 12�x
5�% 10�% 15�%
Digital� 10
Rate card No. 01 Effective from 01.01.2010
auto.vogel.com.cn
Daily industry reports online. News and features on technology and the economy, and management and other facts about manu-facturers, suppliers, and service providers. Compact and competent, up to date and comprehensive.
Format Size in px 1x (Price in €) 3x (Price in €) 6x (Price in €) 12x (Price in €)
Homepage Leaderboard 980 × 70 2000,- Euro 1.800,- Euro 1.600,- Euro 1.200,- Euro
Button 1, First Screen of Homenpage 240 × 50 1.600,- Euro 1.400,- Euro 1.250,- Euro 920,- Euro
Button 2, First Screen of Homepage 240 × 70 1.400,- Euro 1.250,- Euro 1.150,- Euro 850,- Euro
Button 1, The 2nd Screen of Homepage 980 × 70 1.400,- Euro 1.250,- Euro 1.150,- Euro 850,- Euro
First Screen of Homenpage Pop-up 980 × 100 2.400,- Euro 2.100,- Euro 1.900,- Euro 1.400,- Euro
Homepage Moving Button 100 × 100 2.000,- Euro 1.800,- Euro 1.600,- Euro 1.200,- Euro
Homepage Leaderboard
First Screen of HomenpagePop-up
Button 1, First Screen ofHomenpage
Button 2, First Screen of Homepage Homepage
Moving Button
The 2nd Screen ofHomepage, Button 1
ContaCt oFFiCeS / rePreSentationS� 11
Headquarters:
Vogel Business Media GmbH & Co. KGMax-Planck-Strasse 7/997082 WuerzburgGermanyPhone: +49 931 418-0
advertising Department in germany
Christine geistHead of Sales Phone +49 931 [email protected]
editorial Staff
Claus-Peter KöthEditor-in-chiefPhone +49 931 [email protected]
vogel offices:
uSa / Canada Vogel Europublishing Inc.3321 Ashbourne CircleSan Ramon, CA 94583, USA
Martina HauserPhone +1 925 803 1265Fax +1 925 803 [email protected]
united Kingdom / ireland Vogel Europublishing Inc.UK Office
Martina HauserPhone +44 20 3371 7420Fax +44 20 3371 [email protected]
representations:
FranceDEF & COMMUNICATION romain linguanotto48, boulevard Jean Jaurès Phone +33 1 47 30 71 8192110 Clichy, France Fax +33 1 47 30 01 89 [email protected] Salaris Ferdinando SalarisVia Rimembranze 1 Phone +39 338 828502120026 Novate Milanese, Italy Fax +39 0233294887 [email protected]