medical frequency program biopulse 3.0 user manual

Software

http://www.altmedsoft.com/manual/F0/[14-Nov-11 12:37:47 PM]

MEDICAL FREQUENCY PROGRAM-BIOPULSE V.3.0

USER’S MANUAL

DISCLAIMER AND LIABILITY The unit is used under the sole responsibility of the user without liability to themanufacturer. We assume no liability for damage or loss resulting from misuse,mishandling of any Medical Frequency Program – BioPulse v 3.0 Software component. We make no guarantees or warranties with respect to the contents or the use of thismanual and/or Medical Frequency Program – BioPulse v 3.0 software unit.

The information provided in this manual is for informational purposes only and is not intended as asubstitute for advice from your physician or other health care professional. You should not use theinformation in this manual for diagnosis or treatment of any health problem or for prescription of anymedication or other treatment. You should consult with a health care professional before starting anydiet, exercise or supplementation program, before taking any medication, or if you have or suspect youmight have a health problem. You should not stop taking any medication without first consulting yourphysician

MEDICAL FREQUENCY PROGRAM – BIOPULSE V.3.0SOFTWARE LICENSE AGREEMENTAsociacija Alternatyvi Medicina grants Buyer non-exclusive right to install and use MedicalFrequency Program – BioPulse v 3.0 on a single computer and a single terminal for thepurpose of operating products purchased by Buyer from Asociacija Alternatyvi Medicina.You may install one additional copy on a laptop or a home computer provided that it isowned by you, for your use for archival purposes.The Software’s content is protected by copyright laws. Buyer may not rent, lease, loanthe Software without the prior written notice of Asociacija Alternatyvi Medicina. Buyermay not disassemble, copy, reverse engineer, decompile, modify, sublicense, assign,create a derivative work from, or use the Software in any manner except as stated in thisAgreement.

Medical Frequency Program

DISCLAIMER ANDLIABILITYLICENSE AGREEMENTCONTRAINDICATIONSREQUIREMENTS TOPROCEDUREGENERAL INSTRUCTIONSSOFTWARE INSTALLATIONSTARTING AND EXITINGELEMENTS OF THESOFTWARE’S MAINWINDOWOPERATION PROCEDURE

Alt.Med.Soft ©

Software


We do not warrant that Buyer’s use of the Software will be error-free and uninterrupted.In case of defective Software due to workmanship, Buyer may return a faulty disc alongwith dated proofof purchase to correct any error or replace the defective disc free of charge.Except as set forth in this paragraph, the Software is licensed “As Is” without warranty ofany kind,expressed or implied, by statute or otherwise, including but not limited to the impliedwarranties of merchantability, non-infringement and fitness for any particular purpose.We do not guarantee or warrant the suitability of the Software or that it will meet yourrequirements.The liability of Asociacija Alternatyvi Medicina under the warranty set forth above shall belimitedto the amount paid by Buyer for the product.Asociacija Alternatyvi Medicina and its suppliers will not be responsible for any indirect, incidental, special, or consequential damages (including damages for loss of business,loss of profits, etc.) whether based on breach of contract, tort and negligence, productliability and the like Asociacija Alternatyvi Medicina liability to Buyer will be limited to theamount paid for the product.

CONTRAINDICATIONS: Electric cardiac pacemaker; coagulation failure; congenital deformity of central nervoussystem; implantable cardio stimulator; individual intolerance to current electricity; injuryon a skin after electro stimulation; state of acute psychic excitement or intoxication(alcohol), pregnancy.

REQUIREMENTS TO PROCEDURE It is necessary to remove ornaments, watches, glasses. The clothes should be fromnatural fabric. Remove all devices radiating electromagnetic waves such as beeper, cell-phone etc. minimum on a meter. FREQUENCY CORRECTION GUIDELINES Time of frequencies generation can vary, it depends on the quantity of frequenciesrecorded in the device and preset time. You can set any time for a frequency. Usually 3-4minutes are enough for generating of one frequency, but in some cases see thecommentary to the disease and frequencies. Quantity of sessions is selected individually on actual state of health. At preventive care it is recommended to perform 10 sessions every other day, with aninterval 1-3 months. When you treat diseases, the sessions are carried out each day, 1-2sessions per day. Quantity of procedures -10-15 or more, then make an interval for 1-2weeks.

Software


GENERAL INSTRUCTIONS The device connection/disconnection is realized only when the unit is switched off.The connection of the USB- port cable, electrodes for frequency correction is realized onlyin dedicated for them jacks (sockets). The computer should be reliably grounded. INTRODUCTION

The present Maintenance Guide is intended for acquaintance with the rules and order offrequency therapy and Medical Frequency Program – Biopulse v 3.0 softwareoperation. Medical Frequency Program – Biopulse v 3.0 software has been designed to be easy andsimple to use and comes with a comprehensive guidance to maximize ease of use. TheMaintenance Guide contains information necessary for correct software operation andmaintenance. You should read the manual carefully before using your software.

Software contains the health correction module

with frequencies. There are several buttons helping you to destroy pathologic frequencies and strengthenyour physiological frequencies in an organism. The influence on a person is performed in a contact way with the metal electrodes (whichare supplied together with the software).

SOFTWARE INSTALLATION

Before installing the software make sure that the computer satisfies with the technicalrequirements.

Put CD with “Medical Frequency Program - Biopulse v.3.0” software into CD-ROM

drive.You need to copy the software from CD on the hard disk of the computer. Open the

folder and you will see there a file . Click on this file and installation processbegins.

Software


You need to press to choose a directory where you want to install the

software

After you have chosen the directory press the button to continue with

installing the software. The next window creates a shortcut icon of the software in thedirectory. You can also rename the folder.

Software


Then press the button again The software is ready to be installed on your computer and setup program informs

you about it.

If you agree with the setting you chose, press the button to proceed

with the installation.

Software


When the software is successfully installed on your computer you will see the

following window:

You need to press the button

The software Medical Frequency Program –Biopulse v.3.0 is successfully installed on yourcomputer REVIEW OF THE BASIC BUTTONS of the software.

STARTING AND EXITING Medical Frequency Program –Biopulse v.3.0

Software


Before starting the device software make sure that the unit is connected to thecomputer and is switched on. Check the unit switching on by turning on the power buttonon the device side panel. A short sound signal is generated if the device is on.Check the connection of the device, electrodes for frequency therapy, USB-port cable tothe device and computer visually.

To start the program, click the program . The Main window of the program will appear on the screen.

Software


ELEMENTS OF THE SOFTWARE’S MAINWINDOW

After the start of the program the Introductory window appears on the screen.

Some elements are typical for all windows in Windows, some are specific only for thedevice’s software.

TITLE BAR

The Title bar is on the top of the program window, the name of the program

(Medical Frequency Program – BioPulse v 3.0) is indicated in Title bar. The title bar isalways highlighted by the blue color that testifies the activity of the given window andpossibility of work with the given window at the moment.

With the window control buttons which are on the right in the title bar you can:minimize the window into a button on a taskbar , to maximize the window on fulldesktop , to restore the window to its previous size , to close the window . TOOLBOX PANEL

File Click File à Open Project - use this button to open saved projects of frequenciesdirectly from Toolbox panel that you saved for further usage. If you want you can create you own projects consisting of the frequencies, so that to usethe same frequencies next time 2 buttons will be helpful:

Click File à Save Project - this button saves the frequencies you want to use nexttimes

Software


helps you to choose the time of frequencies generation. You may enter necessaryfrequency, time and wave form manually. Also you can use this field for creating your own set of frequencies as a project and saveit in a certain directory on your computer.Left or right click of the mouse on the figures will help you to choose a necessaryfrequency, time of generating and wave form, then press add, the frequency will appearin the field Current list

Then press the button to keep the frequencies in the chosen directory onyour computer for further usage. Or alternatively press the button Save Project from thetoolbox panel.

Click File à Print - to print the information out (frequency name, frequency comment,list of the frequencies for a particular disease).

For example:

Description Name Abdominal painDescriptionCommentary Place one electrode on solar plexus, one on belly. cafl

Frequency list 10000,00 Hz3,00 Hz3000,00 Hz95,00 Hz

Click File à Exit - use File and Exit tabs to exit the program.

Software


Description Click Description à Add

You may enter in the field Name the name of disease or problem.

in Commentary - the notes about frequency Frequency List –

left or right click of the mouse on the figures will help you to choose the frequency valueyou want to in the list and then click

Software


Alternatively you may the frequency or the

frequencies from Frequency List and operation. Choose from the Description List a disease, click Description à Edit

and edit information the disease contains.

The buttons will help you to manage your records. Click Description à Delete – to delete the disease from the software’s database.

The software will ask you to confirm the deletion.

Software


Click Description à Insert To Current List

Choose necessary disease name from the list. This field displays the list of diseases inalphabetical order.The vertical scrolling bar is on the right from the list of diseases.Click the button or on the scrolling bar to move the list of diseases correspondinglyup or down.

click . Choose a waveform and set a second, minute or hourfor a frequency’s generation. Usually 4-5 minutes are enough, but see additionalinformation in commentary field.

Software


The commentary on the disease (some information that might be helpful) will bedisplayed in the middle window together with the frequency value itself.

If there will be “XXXX” signs instead of figures, they are the frequencies which areencoded in the disease name and they will be generated as usually.

Software


- searches the necessary disease from the list. Youcan search it by key word in its name (description), comments or if you remember thefrequency associated with the given disease. Check the box with description if you want to find ‘Energy and vitality’ and enter thename in the search field

or use the comments about this name if any or a frequency in your search

Click Description à Print - to print out the disease’s description.

The print list will look in the following way: Example:

Software


There can be printed several diseases that you choose from the list of diseases. Alternatively you may use the buttons located under the field Description List toexecute the operations on adding, editing, deletion, printing and insertion.

Click Description à View

This function enables you to display the diseases according to alphabetical order, to viewthe diseases starting form a certain letter or hide all names.

Software


Press Description à View à Select All and all diseases in the software’s databasewill be displayed in alphabetical order.

If you want to be displayed only the diseases starting from “A” letter, pressDescription à View à Unselect All à check “A” Click Description à View à Invert Select. You may check a certain letter so that it won’t be displayed in the list together with therest diseases or you may select the all other letters except the chosen one. For example: You click View, remove the check from the letter “C” and press InvertSelect, the diseases starting from letter “C” will be displayed in the list.

Or Click View, remove the check from the letter “C’ and the list with the diseases will be

Software


given without “C” letter: A, B, … D, E, etc.

List Click List à Add - to add the frequency in the special field from where you willgenerate it in the software or device

Left or right click of the mouse on the figures will help you to choose the frequencyvalue, time of generation and wave form you want to in the list

Software


The buttons from the Toolbox Panel or

from the Current List will help you tomanage the software’s operation. Actions Click Actions à Generate to choose the way of frequencies’ generation either througha software or device and electrodes

Where Sound Blaster is generating through the software and USB Device is generatingthrough device “Biopulse TC” Click Actions à Sweep – to choose the function in the software

In the same way as in you may generate this option through software anddevice.

Software


Sweep function is the function of generating the frequencies in a certain frequency rangethat you may set. As in our example, we want to generate the frequencies starting from20 Hz till 1000 Hz with a frequency step 0,1 Hz. It means that the frequencies will begenerated by default with an interval 0,1 Hz, the next frequency after 20 Hz will be 20,1Hz , then 20,2 Hz and so on until it reaches 1000 Hz. You may also set the time for everyfrequency generating in the field Step period and select a waveform in Signalwaveform. For example, 20 Hz will be generated within 3 seconds with the selectedsquare waveform, then 20,1 Hz will be generated also within 3 seconds in the samewaveform and so on until 1000 Hz.

You can also switch the inductor coil checking the box with . The button saves the frequencies in the device. Press the button to generate the frequencies sweep from the software. Click Actions à Read/Record - this function enables you to record chosen frequenciesin the device’s memory to generate them independently from a computer (if youpurchased the software with computer).

Tools Info Click Info à Help – click the button to get online assistance form Support Team

Click Info à Credits

Software


This function is not active yet. It will be available for credits intake. Click Info à Home Page and it will direct you to our website home page.

OPERATION PROCEDURE: Record of the frequencies in the device: 1) Put the electrodes plug and USB-port connecting cable in dedicated for them jacks.Note: If you use the same set of frequencies as the last time you recorded in the device,you don’t need to use data input PC connecting cable; 2) Turn ON/OFF button on the device (if you did not use the testing function before it);3) Run the software Medical Frequency Program – BioPulse v.3.04) Choose the diseases from the list

and insert in the Current List

Software


Then press

The frequencies marked with green color mean that they are ready to be inserted in theGenerator ListThen press so that the frequencies will appear in Generator List

You can change the set of frequencies every time you want by choosing diseases fromthe list and adding them for generation in the toolbox panel Usually you can change the one set of frequencies for another after 10-14 days offrequencies generation, when you complete with one set of diseases and you may begin

Software


with correction of another diseases. But you need to change periodically the frequencies’wave form after 7-10 days of usage so that the organism does not get used to it.The time of correction with frequencies depends on the quantity of frequencies yourecorded scheduled. For example if you set time for one frequency generating 3 minutes and there are totally20 frequencies in the list, then you should seat with electrodes for one hour.

The running green line points that the process of frequencies record is performed. When the frequencies are successfully recorded in the device the message will appear

The frequencies record in the device is performed with the USB-port connecting cable, itshould be plugged into a special jack in the device and USB-port. You can perform the frequencies generation in 2 ways: either through software or device.

Software


Software: Choose from the toolbox panel

and press so that the frequencies will be generated through the soundblaster of the computer (in this case you need to plug simple earphones in theheadphones jack of the computer and put the earphones on any part of the body; do notput the earphones into ears). Or you can generate the frequencies from the device managing the process through thesoftware.It is done in the following way: Plug the electrodes for frequency therapy in the device’s jack. Connect the USB-portcable to the device and computer. Switch the device on, run the software. Choose from the toolbox panel

Software


and press the button Take the cylindrical electrodes in left and right hands;

The frequency marked with green color means that it is generated at the currentmoment. When the frequencies’ generation is completed the software gives you a message thatthe treatment process is completed.

Software


ZAPPER function – this function starts the program for expulsion of worms, parasites.You need to find Zapper in the list of diseases, save the frequencies in the generation listand start generating them. The procedure of Zapper session:Press Zapper, the frequencies are played during 7 minutes, then a short beep is givenand you have to make a break within 20 minutes. After that press Zapper again and holdthe electrodes during 7 minutes. Then again make a 20 minutes rest and play the last 7minutes. The order of procedure is obligatory in this mode.You can make such procedure once a week for preventive care.

medical frequency program biopulse 3.0 user manual

Documents