Medical Video Integration Appliance

ConductOR™ is a revolutionary medical-grade video integration appliance that enables routing of virtually any medical imaging source to the surgeon’s field of view and beyond. This unique solution provides matrix switching functionality within the OR, and HD video streaming to enable telemedicine applications beyond the OR. It addresses the needs of the surgical suite by delivering the functionality of a typical video rack in one medical-grade appliance. The customizable and modular design allow you to only purchase the inputs and output you need, saving cost. Each of the display outputs scales and converts all signals to an HD digital format, dramatically simplifying the cabling requirements, making installation simple.

Matrix Switching Functionality Allows Any Input to be Routed to Any Output

Built-In Front Touch Screen AllowsEasy Control as a Stand-Alone Unit

Modular Design Enables Flexible Configuration Options

Built-In HD Video Streaming Over IP Networks

All-In-One, Medical-Grade, Video Routing Solution

CONDUCT R ™

CONDUCT R Medical Video Integration Appliance

Typical Application Diagram

Doc #60D0116 Rev F

Corporate Headquarters5750 Hellyer Avenue San Jose, CA 95138 (USA)Tel: 408 776 0085 Toll Free: 866 637 5237Email: info@ndssi.com

Asia PacificSea Fort Square/Center Building, 8F2-3-12 Higashi-Shinagawa, Shinagawa-ku Tokyo, Japan 140-0002Tel: + 81 3 5781 8292Email: info@ndssi.jp

EuropeNijverheidscentrum 282761 JP Zevenhuizen (ZH)The NetherlandsTel: + 31 180 63 43 56Email: info-EMEA@ndssi.com

ISO 9001:2008 and ISO 13485:2003;FDA Registration # 2954921 & 1226517

© 2012 NDS Surgical Imaging. Features and specifications are subject to change without notice. This product is intended for displaying radiology (PACS) images for reference purposes only. Products may not be available in all markets and are subject to the regulatory or medical practices that govern individual markets. Always refer to the package insert, product label and/or user instructions before using any NDSsi product. Contact your NDSsi representative for more information. All trademarks are property of their respective owners.

EndoscopicCamera

Fluoroscope PACS Ultrasound Vitals

CONDUCT R

Room Camera

Cart-MountedDisplay

Boom-MountedDisplay

Wall-MountedDisplay

INPUTS

DISPLAY OUTPUTS

ETHERNET

Remote Location

3G-SDI, HD-RGBS / YPbPr HD Endoscopy

SDI, RGBS, YPbPr SD Endoscopy

Sync-On-Green (SOG) Fluoroscopy, Angiography

DVI HD Endoscopy, PACS Imaging, MRI, CT, Vital Signs

S-Video, Composite Fluoroscopy, SD Endoscopy, Ultrasound

VGA PACS Imaging, MRI, Endoscopy, Ultrasound,

Angiography, Vital Signs

SUPPORTED MODALITIES / APPLICATIONS

Built-InTouchScreen

Allows for custom naming of source selection buttons, streaming presets, and

system configuration presets. All stored on a USB drive, making serviceability easy.

FULLY CUSTOMIZABLE USER INTERFACE

COMPLIANCE & CERTIFICATIONSANSI/AAMI ES60601-1, CAN/CSA C22.2 No. 60601-1, FCC Part 15,

EN60601-1, EN60601-1-2, CE, MDD 93/42/EEC, 2007/47/EC, RoHS, WEEE,

Class I Medical Device

Customizable Input Names Inputs Can be Renamed Using Front Touch Panel

9 Available System Presets Easily Store/Recall All User-Definable Settings

USB Storage Device Port Save/Recall All System Presets via USB Storage

Rear Input / Output Connector Panel

Input & Output Modules (DVI-in, 3G-SDI-in, Fiber-out, DVI-out, 3G-SDI-out)