memory based questions of gate 2020memory based questions of gate 2020 electronics and communication...
TRANSCRIPT
Memory Based Questions of
GATE 2020Electronics and
Communication Engineering
www.madeeasy.in
Corporate Office: 44-A/1, Kalu Sarai, New Delhi - 110016 | Ph: 011-45124612, 9958995830
Delhi | Hyderabad | Noida | Bhopal | Jaipur | Lucknow | Indore | Pune | Bhubaneswar | Kolkata | Patna
Detailed Solutions
Scroll down to view
Date of Exam : 2/2/2020Forenoon Session
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 2
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
GENERAL APTITUDE
Q.1Q.1Q.1Q.1Q.1 Time at quarter past three angle between hour hand and minute hand is
Ans.Ans.Ans.Ans.Ans. (7.5°)(7.5°)(7.5°)(7.5°)(7.5°)
End of Solution
Q.2Q.2Q.2Q.2Q.2 Radius of circle is ‘a’ and PQR is the maximum possible area of rectangle.
P Q
S R
a
Find shaded area
(a) πa2 – 2a2 (b) 2 22a aπ −
(c) 2 23a aπ − (d) None of these
Ans.Ans.Ans.Ans.Ans. (a)(a)(a)(a)(a)
End of Solution
Q.3Q.3Q.3Q.3Q.3 Implicit : Explicit : : Express : __________?(a) Compress (b) Suppress(c) Impress (d) Repress
Ans.Ans.Ans.Ans.Ans. (b)(b)(b)(b)(b)
End of Solution
Q.4Q.4Q.4Q.4Q.4 He was not only accused of theft _______ of conspiracy.(a) Rather than (b) Rather(c) But also (d) But even
Ans.Ans.Ans.Ans.Ans. (c)(c)(c)(c)(c)
End of Solution
Location : Delhi Centre
300-350 Hrs of comprehensive classes.Dynamic test series in synchronization with classes.Well designed comprehensive Mains workbooks.Special sessions to improve writing skills, time management & presentation skills.
Conventional Questions Practice Programme
Admission open
Classroom Course
Batches from th18 Feb, 2020
Admission open
300-350 Hrs of comprehensive recorded sessions.Convenience of learning at your own pace. Physical study materials will be provided at your address.
Conventional Questions Practice ProgrammeOnline
ClassesBatches from
th25 Feb, 2020
15 Tests | Mode : Oine/OnlineTest series will be conducted in synchronisation with subjects taught in the classes.Exactly on the UPSC pattern and standard.Contains Repeat Topics and New Topics to maintain continuity in study.Facility to cross check the evaluated answer sheet & access to the top scorer copy.Time bound evaluation of answer sheets with feedback.
Mains Test
SeriesBatches from
th15 Mar, 2020
India’s Best Institute for IES, GATE & PSUsESE 2020Main Exam
www.madeeasy.in
Streams: CE ME EE E&T
Admission open
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 3
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.5Q.5Q.5Q.5Q.5 The untimely loss of life is a course of serious global concern as thousands of peopleget killed ________ accidents every year while many other die _____ disease likecardiovascular disease cancer etc.(a) during, from (b) in, of(c) of, from (d) None of these
Ans.Ans.Ans.Ans.Ans. (b)(b)(b)(b)(b)
End of Solution
Q.6Q.6Q.6Q.6Q.6 The Canadian constitution requires equal importance to English and French. Last yearair Canada lost a lawsuit and had to pay a six figure fine to French speaking coupleafter they field a complaints about formal in-flight announcements in English lasting15 seconds as compared to informal announcements in French lasting only for 5 seconds.The French speaking couples were upset at(a) The English announcements being longer than French once(b) The English announcements being clearer than French(c) Equal importance given to English and French(d) The in-flight announcement being made in English
Ans.Ans.Ans.Ans.Ans. (a)(a)(a)(a)(a)
End of Solution
Q.7Q.7Q.7Q.7Q.7 The global financial crisis in 2008 as considered to be most serious worldwide FC. Whichstarted with sub-prime landing crisis (SPLC) in USA 2007? The SPLC led to bankingcrisis in 2008 with the collapse of Lehman brothers in 2008. The SPL refers to the provisionof loans to those borrowers. Who may have difficulties in repaying loans and its arisesbecause of excess liquidity following the East Asian crisis. The correct precedenceaccording to Paragraph is(a) Banking crisis — Sub-prime landing crisis — Global financial crisis — East Asian crisis(b) Sub-prime landing crisis — Global financial crisis — Banking crisis — East Asian crisis(c) Global financial crisis — East Asian crisis — Banking crisis — Sub-prime landing crisis(d) East Asian crisis — Sub-prime landing crisis — Banking crisis — Global financial crisis
Ans.Ans.Ans.Ans.Ans. (d)(d)(d)(d)(d)
Q.8Q.8Q.8Q.8Q.8 Following quadratic equation isax2 – bx + c = 0 and it has equal root which is β and a, b, c are the real number whichis true
(a) β3 = 22bCa (b) b ≠ 4ac
(c) β = ac (d) β3 = 2
ab
Ans.Ans.Ans.Ans.Ans. (a)(a)(a)(a)(a)
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 4
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
ELECTRONICS AND COMMUNICATIONS ENGINEERING
Q.1Q.1Q.1Q.1Q.1 Given a binary number 1100 and p, q, r represents its sign magnitude, 1’s complement,2’s complement representation respectively.
Then 6 digit 2’s complement form of p + q + r is
Ans.Ans.Ans.Ans.Ans. (110101)(110101)(110101)(110101)(110101)Given, binary number 1100
1’s complement of 1100 = –3Sign magnitude of 1100 = –42’s complement of 1100 = –4
∴ P + Q + R = –4 – 3 – 4 = –11∴ 2’s complement of (–11) = 110101
End of Solution
Q.2Q.2Q.2Q.2Q.2 Output of 4 × 1 MUX F(P, Q, R) is
R
R0
1
FMUX4 × 1
P Q
S1 S0
EN
Ans.Ans.Ans.Ans.Ans.
Output, F = PQR PQR PQ+ +00 01 11 10P
QR
0
1
1
1 1 1
00
0
0
F = QR PQ+
End of Solution
Q.3Q.3Q.3Q.3Q.3 For 10 bit D/A converter, full range of voltage 0-10, then find the output value for Vinput
13A (in hexadecimal) in volts is ______V.
Ans.Ans.Ans.Ans.Ans. (3.066)(3.066)(3.066)(3.066)(3.066)Given, n = 10
VFS = 10 VInput voltage = (13A)16 = (314)10
Output voltage = Resolution × Decimal equivalent of input
Vo = 10
10314 3.066 V
2× =
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 5
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.4Q.4Q.4Q.4Q.4 Given: ( ) ( ) ( )y t W t t∞
−∞
= ⋅ φ∫
W(t) is the random variable having PSD 3W/Hz and 1 5 7
( ) .0 Otherwise
tt
≤ ≤φ =
Find the variance
of y(t)?
Ans.Ans.Ans.Ans.Ans. (6)(6)(6)(6)(6)
Given: φ(t) =1 5 7
0 Otherwise
t≤ ≤
Sω(f) = 3 Watts/HzRω(τ) = 3δ(τ0) = 3δ(t1 – t2)
Var[y] = E[y 2] – E[y]2
E[W(t)]2 = DC power = Area under PSD at f = 0E[W(t)]2 = 0
E[W(t)] = 0
y = ( ) ( )W t t dt∞
−∞
φ∫
E[y] = [ ( )] ( ) 0E W t t dt∞
−∞
φ =∫
y = 2( ) ( ) [ ] ( ) Energy [ (t)]W t t dt E y S f∞
ω−∞
φ → = ⋅ φ∫
= 3 × 2 = 6Var[y] = 6 – 0 = 6
Detailed explanations for :
y = ( ) ( )W t t dt∞
−∞
φ∫
E(y2) = 1 1 1 2 2 2[ ] ( ) ( ) ( ) ( )E y y E W t t dt W t t dt∞ ∞
−∞ −∞
⋅ = φ φ
∫ ∫
= 1 1 1 2 1 2( ) ( ) ( ) ( )E W t W t t t dt dt∞ ∞
−∞ −∞
φ φ ⋅
∫ ∫
= 1 2 1 2 1 2[ ( ) ( )] ( ) ( )E W t W t t t dt dt∞ ∞
−∞ −∞
⋅ φ φ∫ ∫
= 1 2 1 2 1 2( ) ( ) ( )WR t t t t dt dt∞ ∞
−∞ −∞
− φ φ∫ ∫
= 1 2 1 2 1 23 ( ) ( ) ( )t t t t dt dt∞ ∞
−∞ −∞
δ − φ φ∫ ∫
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 6
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Above integration exists providedt1 = t2 = t
= 3 (0) ( ) ( )t t dt dt∞ ∞
−∞ −∞
δ φ φ∫ ∫
= 23 (0) ( )dt t dt∞ ∞
−∞ −∞
δ φ∫ ∫= 3 × 1 × Energy [φ(t)]
E[y2] = 6
End of Solution
Q.5Q.5Q.5Q.5Q.5 Given that m(t) = 4cos1000πt and c(t) = cos2πfct ; where fc = 1 MHz. Given thats(t) = m(t) cos2πfct and s(t) is demodulated using a demodulator.
s t( )
–520 Hz520
cos2 ( + 40)π f tc
y t( )
Then y(t) is
Ans.Ans.Ans.Ans.Ans.
cos [2 ( + 40 ]π f tc )
S t( )–510 500
Hz
S(t) = m(t) cos 2πfctS(t) = 4 cos 1000πt cos 2π (106)t
Output of multiplier= [4 cos 1000πt cos 2π 106t] cos 2π (fct + 40)t]= [2 [cos [2π (500 + 106)t] + cos [2π (106 500)t] cos 2π(fc + 40)t= 2 cos 2π (500 + 106)t cos 2π ((fct + 40)t) + 2 cos [2π (106 – 500)t) cos 2π (fc + 40)t= cos [2π (2fc +540t) + cos(60t) + cos [2fc – 460)t + cos(540t)]Output of Low pass filter
= cos [2π (460)]t= cos 920 πt
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 7
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.6Q.6Q.6Q.6Q.6 Given phase modulated and frequency modulated signalsspm = Accos(2πfct + kp m(t))
sfm =0
cos 2 ( )c c fA f t k m t dt∞
π + ⋅ ∫
where kf is given in rad/sec/voltkp is in rad/voltm(t) is given as
1 3 6 7 t
m t( )
10
Find .p
f
K
K
Ans.Ans.Ans.Ans.Ans. (2)(2)(2)(2)(2)S(t)pm = Ac cos[2π fc t + kp m(t)]
S(t)Fm =0
cos 2 ( )c c fA f t k m t dt∞
π +
∫
Instantaneous frequency are equal
fi =1
( )2
dt
dtθ
π
1 3 6 7
10
m t( )
t
⇒ fi(FM) = fi(PM)
( )2
pc
k df m tdt
+π
= ( )2
fc
kf m t+
π
max
( )2
pk dm t
dtπ=
max( )
2fk m tπ
max( )
dm t
dt= 5, max( )m t = 10
kp(5) = kf(10)
p
f
k
k= 2
End of Solution
Q.7Q.7Q.7Q.7Q.7 A digital communication system is used to transmit a block of N-bits, if the probabilityof receiving 1-bit in error is α and all bits are transmitted independently. The receivedblock is said to be erroneous if at least one bit in error. The probability of the blockto be erroneous is ______.(a) αN (b) 1 – (1 – α)N
(c) N(1 – α) (d) 1 – αN
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 8
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Ans.Ans.Ans.Ans.Ans. (b)(b)(b)(b)(b)Proabability of error in decoding single bit = αThen proabability of no error will be 1 – α.Total N-bits transmitted, so that probability of no error in received block
= (1 – α) (1 – α) ... N times= (1 – α)N
The probability of received block is erroneous = 1 – (1 – α)N
End of Solution
Q.8Q.8Q.8Q.8Q.8 A binary random variable takes two values as +2 and –2 with probability P(X = 2) = α;then value of α for which entropy will be maximum is ______.
Ans.Ans.Ans.Ans.Ans. (1/2)(1/2)(1/2)(1/2)(1/2)Given that P(X = 2) = αEntropy will be maximum; provided probabilities are equal.
i.e. P(X = 2) = 1( 2)
2P X = − = α =
α = 12
End of Solution
Q.9Q.9Q.9Q.9Q.9 Given that X(ω) is Fourier transform of x(t) then find 2( )X d∞
−∞
ω ω∫
3
3
1
–1 0 1 2
x( )t
t
Ans.Ans.Ans.Ans.Ans.
2( )X d∞
−∞
ω ω∫ = 2 22 ( ) 2 ( )t dt y t dt∞ ∞
−∞ −∞
π = π∫ ∫x
3
3
1
–1 0 1 2
x( )t
t
=0
2
2
2 2 ( )y t dt−
× π ∫
=1 0
2 2
2 1
2 2 ( 2) (2 3)t dt t dt−
− −
× π + + +
∫ ∫
=03 3
1
( 2) (2 3)43 3 2
t t
−
+ + + ×
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 9
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
=30 3 1 1 264 4
3 6 3 6t − − π + = π +
= 1 26 1 134 43 6 3 3
π × + = π × +
=14 56
43 3
ππ × =
End of Solution
Q.10Q.10Q.10Q.10Q.10 Given that 3
0
( ) ( 1) ( ).k
K
ky n n k
=
== − −∑ x Then which one of the following is the correct pole
zero plot of above given system?
(a)
Z-plane
4 orderth
1(b)
Z-plane
3 orderrd
1
(c)
Z-plane
3 orderrd
1(d)
Z-plane
3 orderrd
1
Ans.Ans.Ans.Ans.Ans. (b)(b)(b)(b)(b)
y(n) =3
0
( 1) ( )K
K
n K=
− −∑ x
= x(n) – x(n – 1) + x(n – 2) – x(n – 3)⇒ Y(z) = X(z ) – z –1 X(z) + z–2 X(z) – z –3 X(z)
⇒ H(z) =1 2 3( ) 1
( )Y z z z zX z
− − −= − + −
=3 2 2
3 3
1 ( 1) ( 1)z z z z zz z
− + − − +=
Pole zero plot:Z-plane
3 orderrd
1
End of Solution
New Batches
ESE 2021GATE 2021
Regular Weekend
Early Start... • Extra Edge...
1 Year/2YearsClassroom Courses
www.madeeasy.in
BATCH COMMENCEMENT DATES
India’s Best Institute for IES, GATE & PSUs
DELHI
Patna : 24-02-2020
Lucknow : 20-02-2020
Bhopal : 16-01-2020
Indore : 20-02-2020
Pune : 10-02-2020
Hyderabad : 16-03-2020
Bhubaneswar : 23-01-2020
Kolkata : 25-01-2020
Jaipur : 16-02-2020
Delhi and Noida Rest of India
Evening : thME : 16 Jan, 2020thCE : 30 Jan, 2020thEE, EC : 20 Jan, 2020
Morning : thCE, ME : 12 Feb, 2020thEE : 18 Feb, 2020thEC : 6 Apr, 2020
stCE : 1 Feb, 2020thME : 9 Feb, 2020
thEE : 18 Feb, 2020ndEC : 22 Feb, 2020
WEEKEND BATCHES
REGULARBATCHES
DELHI
NOIDAth18 Jan, 2020
CE, ME, EE, EC
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 10
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.11Q.11Q.11Q.11Q.11 Discrete time signals output is y(n) = max[X(k)], –∞ ≤ K ≤ n(a) unit impulse (b) unit step function(c) a constant function (d) zero
Ans.Ans.Ans.Ans.Ans. (b)(b)(b)(b)(b)
End of Solution
Q.12Q.12Q.12Q.12Q.12 A finite duration discrete time signals x(n) is obtained by sampling x(t) = cos[200πt]
of sample instant = ,400n
n = 0, 1, 2, ... 7. The 8-point DFT of x(n) is defined as
74
0
[ ] ( ) , 0,1, ... 7k
n
n
X k n e kπ−
== ⋅ =∑
ix
(a) X (3) and X(5) are non-zero (b) X(4) is non-zero(c) X(2) and X(6) are non-zero (d) All X (k) are non-zero
Ans.Ans.Ans.Ans.Ans. (c)(c)(c)(c)(c)x(t) = cos200πt
t =400n
x(n) = cos 200 cos ; 0,1,...,7400 2n n nπ π = =
=3 5 7cos0,cos ,cos ,cos ,cos2 ,cos ,cos3 ,cos
2 2 2 2π π π π π π π
= 1, 0, –1, 0, 1, 0, –1, 0 DFT→← X(k)
Suppose, y(n) = 1, –1, 1, –1 DFT→← Y(k)
[Y(k)] = [ ]4, 0, 4, 0
1 1 1 1 1
1 1 1[ ] [ ( )] 0
1 1 1 1 1
1 1 1
N N
j jW y n
j j
=
− − − = = − − − − −
Now, as we know,
If for a, b, c, d DFT→← A, B, C, D
Then for a, 0, b, 0, c, 0, d, 0 DFT→← A, B, C, D, A, B, C, D
Similarly, for y(n) = 1, –1, 1, –1 DFT→← Y(k) = 0, 0, 4, 0
Here, for x(n) = 1, 0, –1, 0, 1, 0, –1, 0X(k) = 0, 0, 4, 0, 0, 0, 4, 0
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 11
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.13Q.13Q.13Q.13Q.13 The transfer function of a stable discrete time LTI system is ( )( )( 0.5)K zH zz
− α=+
when α
and K are constants and 1.α > If the magnitude response is constant for all frequencies
then the value of α is ____.
Ans.Ans.Ans.Ans.Ans. (–2)(–2)(–2)(–2)(–2)System is all-pass filter.For digital all-pass filter, condition is
Zero =1
Pole∗ ...(i)
By given transfer function,Zero = αPole = –0.5
Using condition (i),
α =1
20.5
= −−
End of Solution
Q.14Q.14Q.14Q.14Q.14 For the impedance Z = jX, having X values from –∞ to ∞, which of the following is correctin the Smith chart?(a) A circle of radius 1, with centre at (0, 0)(b) A point at the centre of the Smith chart(c) A circle of radius 0.5 with centre at (0.5, 0)(d) A line passing through the centre of the Smith chart
Ans.Ans.Ans.Ans.Ans. (a)(a)(a)(a)(a)For given impedance Normalized impedance is
0
ZZ
=0
jXZ
Z = jX⇒ Z = 0 + jXNormalized resistance = 0 ⇒ r = 0X = –∞ to ∞r = 0 and X from –∞ to ∞ is a unit circle (radius 1) and centre (0, 0) on a complexreflection coefficient plane:
Γr
r = 0Γi
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 12
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.15Q.15Q.15Q.15Q.15 Which one of the following is correct?
(a) 2 0A∇ = then ‘A’ is irrotational
(b) ( ) ( )( )2·A A A∇ ∇ = ∇ × ∇ × − ∇
(c) · 0A∇ = then vector is A is solenoidal
(d) A∇ × is also a vector quantity
Ans.Ans.Ans.Ans.Ans. (a)(a)(a)(a)(a)
End of Solution
Q.16Q.16Q.16Q.16Q.16 Given the magnetic field intensity of a uniform plane wave in vacuum is
ˆ ˆ ˆ( , , , ) ( 2 )cos( 3 )y zH y z t a a ba t y z= + + ω + − −xx x
then find value of b _____.
Ans.Ans.Ans.Ans.Ans. (1)(1)(1)(1)(1)For uniform plane wave
ˆ ˆHa aρ⋅ = 0
ˆHa is unit vector in magnetic field direction aρ is unit vector in power flow direction
ˆHa =2 2 2
ˆ ˆ ˆ1 2
1 2y za a ba
b
+ +
+ +x
aρ =2 2 2
ˆ ˆ ˆ3
3 1 1y za a a− + +
+ +x
ˆ ˆHa aρ⋅ = 0
ˆ ˆ ˆ ˆ ˆ ˆ( 2 ) ( 3 )y z y za a ba a a a+ + ⋅ − + +x x = 0
–3 + 2 + b = 0b = 1
End of Solution
Q.17Q.17Q.17Q.17Q.17 For a given two port ideal lossless transformer, the parameter S21 for a referenceimpedance of 1 Ω is
2 : 1
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 13
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Ans.Ans.Ans.Ans.Ans. (0.8)(0.8)(0.8)(0.8)(0.8)For ideal transformer of n : 1, the scattering matrix is
11 12
21 22
S SS S
=
2
2 2
2
2 2
1 21 1
2 11 1
n nn n
n nn n
−
+ + − + +
S21 = 2 2
2 2(2) 40.8
51 2 1
nn
= = =+ +
End of Solution
Q.18Q.18Q.18Q.18Q.18 For an infinitely small dipole in free space, the electric field Eo in the far field is proportional
to sin ,jkrer
− θ
where 2
.Kπ=
λ A vertical infinitesimally small electric dipole (δI << λ)
is placed at a distance h(h > 0) above an infinite ideal conduction plane as shown infigure. The minimum value of ‘h’, for which one of maxima in the far field radiation patternoccurs at θ = 60° is _____.
θ
I δl
h
z
Infinite conduction plate
y
Ans.Ans.Ans.Ans.Ans. (((((λλλλλ/4)/4)/4)/4)/4)
End of Solution
Q.19Q.19Q.19Q.19Q.19 For a given transistor T1, base region has uniform doping of 1017/cm3 and transistorT2 has base region with doping varying linearly with x. If all other parameters of thetransistor are same, then find the ratio of common emitter current gain of transistor T1
to transistor T2?
10 /cm17 3
1014/cm3
W0
(a) 0.3 times that of T2 (b) 0.7 times that of T2
(c) 2 times that of T2 (d) 2.5 times that of T2
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 14
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Ans.Ans.Ans.Ans.Ans. (c)(c)(c)(c)(c)
1
2
ββ
=2
1
0
0
( )
( )
W
A
W
A
N d
N d
∫
∫
x x
x x
=( )
17
17 14
102
110 10
2
W
W
×
× × −
End of Solution
Q.20Q.20Q.20Q.20Q.20 For a solar cell, Pin = 100 mW/cm2, surface area = 1 cm2, Voc = 0.7V, fill factor = 0.8,efficiency = 15%. If thickness of the cell is 200 µm, then the light generation ratewill be
Ans.Ans.Ans.Ans.Ans.
η =( ) OC SC
in
FF VP
I
0.15 =0.8 0.7
100 mWSC× × I
⇒ ISC =15
mA0.56
GL = Area × thicknessSC
q ×I
=3
19 4
15 10
0.56 1.6 10 1 200 10
−
− −×
× × × × ×
= 19 19 31510 0.837 10 / cm /second
0.56 32× = ×
×
End of Solution
Q.21Q.21Q.21Q.21Q.21 Given that a semiconductor has density of state function in conduction band NC is halfof density of state function in valence band NV, then the shift in the intrinsic fermi levelfrom the centre of forbidden gap is ____ meV.
Ans.Ans.Ans.Ans.Ans. (9.01)(9.01)(9.01)(9.01)(9.01)
2C V
FE E
E+
− i = ln2
C
V
kT NN
2
VC
NN = ∵
=0.026
ln0.5 9.01 meV2
= −
End of Solution
UPPSCCombined State
Engineering Services Exam, 2019
Assistant Engineer | Total Posts : 692
Admission open
650 Hrs of comprehensive course.General Studies and Hindi covered.Exclusive study materials will be provided as per requirement of UPPSC.
thCommencing from 10 Feb, 2020 | Classes at Delhi and Lucknow
CourseClassroom
Streams: CE, ME, EE
Admission open
Admission open
Technical theory books with practice questions. Previous years' solved papers. Practice books (MCQ) for technical subjects. General Studies theory book with practice questions. Hindi book with practice questions.
Enrollment open
CoursePostal
Streams: CE, ME, EE
Admission open
Useful for those candidates who are not able to join classroom programme. 650 Hrs of quality classes at your doorstep. Flexibility to learn at your own pace. Physical study materials will be dispatched at your address.
thCommencing from 10 Feb, 2020
ClassesLive/Online
Streams: CE, ME, EE
India’s Best Institute for IES, GATE & PSUs
Quality questions with detailed solutions. Comprehensive performance analysis. Tests on standard and pattern as per UPPSC examination.
rd20 Tests | Commencing from 23 Feb, 2020
(Online/Offline)Test Series
Streams: CE, ME, EE
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 15
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.22Q.22Q.22Q.22Q.22 In a MOS capacitor, threshold voltage is –0.16V, metal work function is 3.7V, bandgap
of semiconductor is 1 eV whose band diagram is shown below. C ′x = 100 pF/cm2. Oxide
is free from non-idealities. When the voltage across the capacitor is equal to thresholdvoltage, what will be the depletion charge present in the semiconductor?
4 eV
Ec
E0
Ei
0.5 eV
0.2 eVEF
Ans.Ans.Ans.Ans.Ans.MOS capacitance
φm = 3.7, φs = 4.8, φms = –1.1
VT = 2ox dms Fp
ox ox
Q QC C
′ ′φ − − + φ
φFp = Ei – EF = 0.5 – 0.2 = 0.3
–0.16 = 1.1 0 2 0.3d
ox
QC
′− − − + ×
d
ox
QC
′= 0.6 + 0.16 – 1.1 = –0.34
Qb = –0.34 × Cox
= –0.34 × 100 × 10–9
= –34 nC/cm2
Q.23Q.23Q.23Q.23Q.23 Consider the following MOSFET, find the equivalent Norton’s resistance
R
g rm ds,
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 16
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Ans.Ans.Ans.Ans.Ans.
vπ = –Vx
Vx = (Ix – gm Vx) rds + IxR
g vm π rds
R
+–
+
–
vπ
Ix
DG
SVx(1 + gm rds) = (rds + R)Ix
RN =1
ds
m ds
V R rg r+=
+x
xI
End of Solution
Q.24Q.24Q.24Q.24Q.24 A sinusoidal voltage is applied to the given circuit, then the steady state output voltage Vo
is _______ V.
CVrms = 230 V
CVo
Ans.Ans.Ans.Ans.Ans. (650.4)(650.4)(650.4)(650.4)(650.4)
Voltage doubles, Vo = 2 Vm = 2 230 2 650.4 V× ≅
End of Solution
Q.25Q.25Q.25Q.25Q.25 Consider the op-amp shown below:
–
+1 kΩ
+5
–5VVi = 2V
1 kΩ
I0
1 kΩ
The current “I0” is ________ mA.
Ans.Ans.Ans.Ans.Ans. (6)(6)(6)(6)(6)
Vo
1 kΩIo2 V
1 kΩ
1 kΩ
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 17
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Vo = (1 + 1) × 2 = 4 V
2 4 0 41 1o− −+ +I = 0
–2 + Io – 4 = 0⇒ Io = 6 mA
End of Solution
Q.26Q.26Q.26Q.26Q.26
+
–1 Ω
+5V
–5V
1 Ω
I0
Vi
Vi
V0
t
1V
–1V
The output V0 is(a) square wave with an amplitude of 5V(b) sinusoidal of amplitude 10V(c) inverted sinusoidal of input(d) constant signal with either +5V and –5V
Ans.Ans.Ans.Ans.Ans. (a)(a)(a)(a)(a)The given circuit is a Schmitt trigger, which produces a square wave at the output.
End of Solution
Q.27Q.27Q.27Q.27Q.27 Find the state matrix (consider v and i as state variables).
2 Ω
0.5 H
1 ΩI1
i+
–v 0.25 F I2
Ans.Ans.Ans.Ans.Ans.From source transformation,
0.5 H
2I1
i+
–v 0.25 F I2
2 Ω 1 Ω
(1)
KVL in loop 1,
2I1 = 2 0.5d
vdt
+ +ii
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 18
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
ddt
i= –2V + 4i + 4I1 (i)
KCL at node,
i = 20.251
Vdvdt
−+ I
dvdt
= –4V + 4i + 4I2 (ii)
( )
( )
dv tdt
d tdt
i=
1
2
4 4 ( ) 0 4
2 4 ( ) 4 0
v tt
− + − −
IIi
End of Solution
Q.28Q.28Q.28Q.28Q.28 When base current of given BJT is negligible. Given that Vt = 26 mV and VBE = 0.7V.
V0
10 kΩ
Vi
10V
–10V
10 kΩ
20 kΩ
Voltage gain at low frequencies is
Ans.Ans.Ans.Ans.Ans. (–89.423)(–89.423)(–89.423)(–89.423)(–89.423)
IEQ =10 0.7
0.465 mA20− =
gm =0.465
A/V26
EQ
TV=
I
out
in
VV
=0.465
( ) 5000 89.42326m e Lg R R||− = × = −
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 19
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.29Q.29Q.29Q.29Q.29 In the given Nyquist contour the pole zero locations are indicated as shown. If the givencontour is transformed from s-plane to G(s) H(s) plane then which one of the followingis true
(a) encircles the origin in clockwise(b) encircles the –1 + j0 in clockwise(c) encircles the –1 + j0 in anticlockwise(d) encircles the origin in anticlockwise
Ans.Ans.Ans.Ans.Ans. (b)(b)(b)(b)(b)
End of Solution
Q.30Q.30Q.30Q.30Q.30 Given op-amp circuit
–
+
R
R
2R
C
V0
2C
Vi
R = 10 kΩ, C = 0.1 µF, then the 3dB cut-off frequency of op-amp circuit is ____ Hz.
Ans.Ans.Ans.Ans.Ans. (159.2)(159.2)(159.2)(159.2)(159.2)Op-amp active filter (LPF) inverting type 3 dB cut-off frequency,
fc =4 7
1 1 10002 22 10 10RC −= =
π ππ × ×
= 159.2 Hz
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 20
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.31Q.31Q.31Q.31Q.31 In the following circuit, assume that IB = 0, VBE = 0.7V for both the transistors. If Vin = 15V(unregulated) and V0 = 9V (regulated), then the resistance R is equal to _______ Ω.
R
1 k Ω
V0 = 9VVin = +15V
+3.3V
Ans.Ans.Ans.Ans.Ans. (800)(800)(800)(800)(800)
91kR
R×
+ Ω = 4
9R = 4R + 4 kΩ5R = 4K
R =4000
8005
= Ω
End of Solution
Q.32Q.32Q.32Q.32Q.32 Consider the below figure.
G s( )x( ) = 5cos3t t 110
y t( ) = cos(3 – 1.8 )t
G(s) =1
( 1) ( )s s+ + αFind the value of α.
Ans.Ans.Ans.Ans.Ans. (4)(4)(4)(4)(4)
Given that, G(jω) = 1(1 ) ( )j j+ ω α + ω
; ( )G jω = 2 2 2
1
( 1) ( )ω + ω + αAccording to question,
3( )G j ω =ω =
15 10
⇒1 2 2
1
( 1) ( )ω + ω + α=
15 10
⇒2
1
10( )a a+=
15 10
α2 + 9 = 25α2 = 16α = 4
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 21
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.33Q.33Q.33Q.33Q.33 Given: ( ) ( ) ( )( 1) 1
,3 1
K sC s G s
s s s+= =
+ +. If steady state error for ramp input is 0.1, then
find the value of k or negative feedback unity gain system
C s( ) G s( )R s( ) Y s( )+–
Ans.Ans.Ans.Ans.Ans. (30)(30)(30)(30)(30)
Open loop transfer function for the system = C(s) × G(s) = ( 1) 1
( 3) ( 1)K ss s s
+ ×+ +
Since the system is type-1 so far a given unit ramp input steady state
ess = 1
VK
where, KV = lim( 3) 3s
K Kss s→ ∞
× =+
So, ess =1 3/ 3K K
=
Given that, ess = 0.1
So, 0.1 =3
30KK
⇒ =
End of Solution
Q.34Q.34Q.34Q.34Q.34 If the value of current i = 10 cos 54
t π − , the value of inductance L is
R
L+
V t t( ) = 200 cos 5–
Ans.Ans.Ans.Ans.Ans. (2.828)(2.828)(2.828)(2.828)(2.828)
Z =VI
= 200 0
20 4510 45
∠ = ∠∠ −
Z = 10 2 10 2j+
XL = 10 2
ωL = 10 2
L =10 2
5 = 2.828 H
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 22
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.35Q.35Q.35Q.35Q.35 For given open loop transfer function ( )
( )( )11
( ) ( ) .2 8
k sG s H s
s s s+
=+ +
Find value of k for which
system is marginally stable.
Ans.Ans.Ans.Ans.Ans. (160)(160)(160)(160)(160)Characteristic equation q(s) for the given open loop system will be
q(s) = s3 + 10s2 + 16s + Ks + 11K = 0Using R-H criteria,
3
2
1
0
1 16
10 10
10(16 ) 110
10
11 0
s K
s KK K
s
s K
+
+ −
For system to be marginally stabled
10(16 ) 1110K K+ −
= 0
160 + 10K – 11K = 0K = 160
End of Solution
Q.36Q.36Q.36Q.36Q.36 A two port network has an impedance [Z] = 40 60
60 120
, find [ZL] for maximum power
transfer. Find ZL = ?
10 Ω
120 V
I1I2
Z ZL
+
–
V1
+
–VL
Ans.Ans.Ans.Ans.Ans. (48)(48)(48)(48)(48)From maximum power transfer theorem
ZL = Zth
Zth = 12 2122
5 11
Z ZZ
R Z−
−+
For given data
Zth =60 60
120 4810 40
×− = Ω+
ZL = 48Ω
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 23
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.37Q.37Q.37Q.37Q.37 Find value of Vth
1 A
2 V 2 Ω
1 Ω 2 A
4 Ω
Vth
+
–
2 Ω
Ans.Ans.Ans.Ans.Ans. (3.6)(3.6)(3.6)(3.6)(3.6)By applying source transformation
1 A
– +2 Ω 4 Ω2 V
2 A 2 Ω+–
1 Ω
1 A 3 Ω
4 Ω
2 A 2 Ω
3.6 V
4 Ω
+–
Vth
Vth = 3.6 V
Ω65
Vth = 3.6 V
End of Solution
Q.38Q.38Q.38Q.38Q.38 Find the value of Io
Z j = 80 – 35
Z
Z
Io
120 –90°∠+
–
–
+120 –30°∠
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 24
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Ans.Ans.Ans.Ans.Ans. (143.7)(143.7)(143.7)(143.7)(143.7)
+
+
–
–
Z
Z
Z j = 80 – 35I0
120 –90°∠
120 –30°∠
I1
I2
I0 = [I1 + I2]
I0 =120 90 120 30
80 35 80 35j j ∠ − ° ∠ − °+ − −
I0 = 2.38 ∠143.7°
End of Solution
Q.39Q.39Q.39Q.39Q.39 In a transmission line given Z0 = 50, ZL = 400, 34λ=l , find Zin
Ans.Ans.Ans.Ans.Ans. (6.25)(6.25)(6.25)(6.25)(6.25)l = 3 /4λ
Zo = 50 Ω
Zin
ZL = 400 Ω
Zin for (l = λ/4) =2 20 50 25 6.25
400 4L
ZZ
= = = Ω
End of Solution
Q.40Q.40Q.40Q.40Q.40 For the given characteristic equationQ(s) = s3 + 3s2 + (K + 2)s + 3K = 0The root locus plot will have breakaway or break-in point in the region.(a) (0, –1) (b) (–1, –3)(c) (–∞, –3) (d) None of these
Ans.Ans.Ans.Ans.Ans. (a)(a)(a)(a)(a)Q(s) = 1 + G(s) H(s) = 0
s3 + 3s2 + 2s + ks + 3k = 0
–k =3 23 2
3s s s
s+ +
+
dkds
− =2 3 2
2( 3)(3 6 2) ( 3 2 )
0( 3)
s s s s s s
s
+ + + − + + =+
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 25
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
3s3 + 6s2 + 2s + 9s2 + 18s + 6 – s3 – 3s2 – 2s = 02s3 + 12s2 + 18s + 6 = 0
s = –0.46, –3.87, –1.65
–3 –2 –1 0
–0.46
Im
Re
End of Solution
Q.41Q.41Q.41Q.41Q.412
26 9 0
d y dydd
− + =xx
. Find the solution of differential equation
(a) (C1 + C2 x)e3x (b) (C1 + C2 x)e–3x
(c) C1 e3x (d) None of these
Ans.Ans.Ans.Ans.Ans. (a)(a)(a)(a)(a)
End of Solution
Q.42Q.42Q.42Q.42Q.42 In sequential circuit, the maximum clock frequency at which given circuit can operatereliably?
tpd = 3 nstsetup = 5 nsthold = 1 nsCLK
FF1
tpd = 8 nstsetup = 4 nsthold = 3 ns
FF2IN
tpd = 2 nstpd = 2 ns
Ans.Ans.Ans.Ans.Ans. (76.92)(76.92)(76.92)(76.92)(76.92)Total propagation delay = (tpd + tset-up)max = 8ns = 5 ns = 13 ns
∴ Frequency of operations =1000
MHz = 76.92 MHz13
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 26
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.43Q.43Q.43Q.43Q.43 f (x, y, z) = e(1 – x cosy) 21/1 yze− ++ x partial differentiation of f (x, y, z) with respect to x
at point (1, 0, e) will be
Ans.Ans.Ans.Ans.Ans. (0)(0)(0)(0)(0)
End of Solution
Q.44Q.44Q.44Q.44Q.44 f (x2 + x2) ≥ f(x1) + f(x2)
(a)1x (b) square root of x
(c) e x (d) e –x
Ans.Ans.Ans.Ans.Ans. (c)(c)(c)(c)(c)Verify with options
Option (a):Option (a):Option (a):Option (a):Option (a):1 2
1+x x
≥1 2
1 1+x x
12 3+
≥1 12 3
+
15
≥56
0.2 ≥ 0.8 which is wrong.
Option (b):Option (b):Option (b):Option (b):Option (b): 1 2+x x ≥ 1 2+x x
2 3+ ≥ 2 3+
5 ≥ 1.414 + 1.732
2.23 ≥ 3.146 which is wrong.
Option (c):Option (c):Option (c):Option (c):Option (c): 1 2e +x x ≥ 1 2e e+x x
e1 + 2 ≥ e1 + e2
20.085 ≥ 2.718 + 7.389 Satisfying.
End of Solution
Q.45Q.45Q.45Q.45Q.45s
d dydz∫ ∫ ∫ x x
x
y
z
10
3
1
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 27
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Ans.Ans.Ans.Ans.Ans. (9/4)(9/4)(9/4)(9/4)(9/4)x : 0 to 3y : 0 to 1z : 0 to 1 – y
=11 3
0 0 0
y
y z
d dy dz−
= = =∫ ∫ ∫
x
x x
=
311 2
0 0 02
y
ydz dy
−
=
∫ ∫x
= ( )1
10
0
92
yz dy−∫
=11 2
0 0
9 9(1 )
2 2 2y
y dy y
− = − ∫
=9 1 912 2 4
− =
End of Solution
Q.46Q.46Q.46Q.46Q.46 If x is having uniform distribution between [– 2, 10] and y = 2x – 6 then 75
yP < > x
Ans.Ans.Ans.Ans.Ans. (0.3)(0.3)(0.3)(0.3)(0.3)x follows uniform distribution over [–2, 10]
∴ f(x) = 1 1 110 ( 2) 12b a
= =− − −
Given: y = 2x – 6
⇒ x =6
2y +
For y = 7
x =7 6 13
6.52 2+ = =
75
yP
< > x =
6.55
P < <
xx
= [ 5 and 6.5]
[ 5]P
P> <
>x x
x
=
6.5 6.5
5 510 10
5 5
1( )
12[5 6.5][ 5] 1
( )12
f d dP
Pf d d
< < = =>
∫ ∫
∫ ∫
x x xx
xx x x
=6.55105
( ) 1.50.3
5( )= =x
x
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 28
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.47Q.47Q.47Q.47Q.47 ( )1dy
yd
= − xx solution of equation satisfies.
(a) ln 1y − = 0.5x2 + c and y = – 1 (b) ln 1y − = 2x2 + c and y = 1
(c) ln 1y − = 0.5x2 + c and y = 1 (d) ln 1y − = 2x2 + c and y = –1
Ans.Ans.Ans.Ans.Ans. (a)(a)(a)(a)(a)
Given differential equation: ( 1)dy
yd
= − xx
By variable separable method:
1dy
y −∫ = d∫ x x
ln 1y − =2
2c+x
(where y ≠ 1)
Thus, solution is valid for y ≠ 1.
End of Solution
Q.48Q.48Q.48Q.48Q.48 Two sides of a fair coin are labelled as 0 and 1. The coin is tossed two times independently.Let M and N denote lables corresponding to the outcomes of those process for randomvariable X, where X = min(M, N), E(X) = _______.
Ans.Ans.Ans.Ans.Ans. (0.25)(0.25)(0.25)(0.25)(0.25)s = ( H, H), (H, T), (T, H), (T, T)
M =1 1 0 0
H H T T
of first toss
N =H T H T
1 0 1 0
of second toss
Now, X = Min M, N∴ X = Min H, H = Min(1, 1) = 1
X = Min H, T = Min1, 0 = 0X = MinT, H = Min0, 1 = 0X = MinT, T = Min0, 0 = 0
∴ P(X = 1) =1
,4
P(X = 0) = 34
We know that, E(X) = ( )X P∑ i ii
x
=1 3 1
1 0 0.254 4 4
× + × = =
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 29
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.49Q.49Q.49Q.49Q.49 In a digital communication system, 4 symbols are transmitted (s1 = –3, s2 = –1, s3 = 1,s4 = 2) through an AWGN channel. The variable at the input of decision device is si + W,where W is a Gaussian random variable with mean zero and unit variance. ML decodingis used. The conditional error probability when symbol si is transmitted is Pi. The valueof “i ” that result in maximum Pi is _____.
Ans.Ans.Ans.Ans.Ans. (3)(3)(3)(3)(3)Since the noise variable is Gaussian with zero mean and ML decoding is used, thedecision boundary between two adjacent signal points will be their arithmetic mean.
In the following graphs, the shaded area indicates the conditional probability of decodinga symbol correctly when it is transmitted.
+1 +2–2
–1–3
+2–2
–1–3 +10
+1+2 0–1 +11.5
+1+2 +1–1 1.52
P1 = 1 – (shaded area)
P2 = 1 – (shaded area)
P3 = 1 – (shaded area)
P4 = 1 – (shaded area)
By comparing the above graphs, we can conclude that P3 is larger among the four.
End of Solution
Corporate Office: 44-A/1, Kalu Sarai, New Delhi-110016 | [email protected] | www.madeeasy.in Page 30
Memory Based Questions of GATE 2020Electronics and Comm. Engg. | Afternoon Session
Q.50Q.50Q.50Q.50Q.50 V1, V2, V3, V4, V5, V6 six vector in R4 which of the following statements is false?(a) Any 4 base for R4
(b) If V1, V3, V5, V7 span R4 then it forms a basis of R4
(c) These vectors are not linearly independent(d) It is not necessary that vector span R4
Ans.Ans.Ans.Ans.Ans. (a)(a)(a)(a)(a)
End of Solution
Q.51Q.51Q.51Q.51Q.51 In 8085 microprocessor to access a memory of 16 kB number of address lines requiredis ____.
Ans.Ans.Ans.Ans.Ans. (14)(14)(14)(14)(14)2n = Nn → Number of address linesN → Number of Memory locations
∴ 2n = 16 kB= 24 (210) [∵ 1 kB = 210]= 214
n = 14
End of Solution