Specifications and market analysis of

Mens trousers

By: Abhitosh Kumar Chaitanya Attuluri Haqiqat Ali Neeraj Kumar

Under the Guidance of Ms. Priyadarshini

Specification and specification sheet

A precise statement of a set of requirements to be

satisfied by a material, product, system or service.

Emphasize the key elements to be satisfied related to

quantity as well as quality .

Technically specific terms and numerical values with

measurement units corresponding to different

aspects of material are listed.

Types of specifications

On the basis of permission for changes in the

specifications

Open specification describes what is wanted but at

the same time leaves the field open to any supplier

who can meet the requirements specified.

Closed specification specifies the exact material

component or product by manufacturer or vendor

and includes style number ,trade names and other

specific identifiers.

Types of specifications

Target Functional Product Materials Process Inspection

On the basis of Manufacturing and quality aspects

Acceptance Installation Maintenance Disposal procurement

Potential problem areas related to specification Words

Incorrect usage

Non standard words

Incorrect text reference

Ambiguous technical words

Presentation

Poor visuals

Irrelevant examples

Untrue statements

Ideas

Confused statements

Multiple mix

specification system

Omissions

Contradictions

Market survey

Inorbit hitech city

Major brands for trousers:-

Indian terrain,

Code

Arrow

Van Heusens

Allen Solly

Material and trims specifications

Fabric: Fabric to be Battle

Rip 65% polyester and 35%

cotton Rip stop,

Weight: 6.5 oz /Sq Yd.

Construction: 105x48

Yarn Size: 20 RS X 12.50 OE

Tear: 9.5 x 120

Crocking Dry: 4.0

Crocking Wet: 3.0

Color fastness to Light: 4

Shrinkage: 2.5%

Pockets:

Two front slash pockets, two rear inset pockets covered

buttons.

Two Partial bellows pockets each let, with 3 pleat cargo

with finished eyelet drain foles and covered buttons with

fused button down flaps.

Seams:

Inseam, out-seam, and seat-seam must be two needle

felled construction.

All seam settings must be accomplished with no

puckering in the seam panel.

Leg Hem:

Leg hem drawstrings shall consist of 3/8 nulon

drawstrings (GST) fused and knotted ends, with sewn

eyelet exit holes will be cause for rejection.

Belt Loops:

Belt loops shall be of double fabric thickness, butted on

reverse side and blind stitched minimum of 7/16 wide

by minimum 2 long.

Size Label:

The size label is located in the waistband

near the centre back, sewn under the

waistband.

In addition the care label, located on the

right rear pocket bag with four sides sewn

down

must include laundering instructions

Measurement specification

Waist In 26 28 30 32 34

Cm 67 72 77 82 87

Pant Length In 28 28 29 30 31

(Inner Leg) Cm 70 72 75 76 78

Waist In 35 39 40 42 44

Cm 92 97 102 107 112

Pant Length In 31 32 33 34 35

(Inner Leg) Cm 80 82 84 85 87

Rise: the measurement from the top of the waistband,

down the front fly, ending at the crotch seam. Specs listed

below are measured on a size 32 trouser, these

measurements increase or decrease 1/8" per size.

Regular/Trim: 10 5/8". Regular/Full: 11 1/8".

Leg Opening: the measurement across the bottom of the

trouser. Specs listed below are measured on a size 32

trouser, these measurements increase or decrease 1/8" per

size. Regular/Trim: 8 3/4". Regular/Full: 9 1/4".

Fit Specifications

Each trouser shall be delivered separately in

clear plastic packaging and delivered in boxes

of 10 pieces.

Each box shall be clearly marked with the

barcode, the initials or name of the

manufacturer

and details of the contends-i.e. number of items

and sizes.

Packaging specifications

Comparison of brands

Code

Arrow

Van Heusen

Indian Terrain

Fabric: 8.5-ounce, 100 percent cotton canvas that is

ring spun, preshrunk, washed and has DuPont

Teflon coating.

Fit: Instead of adapting a pant for lean hikers, EOTAC's

tactical pants, are made for those with a more

muscular build. The pants are not pleated.

Crotch construction: The gusseted crotch relieves the

pressure zone and prevents blowouts.

Code

Waist style: EOTAC's waistband is nearly identical to

the typical elastic band on the market.

Reinforcements: There's a double layer of fabric over

the knees and an added liner in the utility pockets give

bonus support.

Fly type: A metal tack-button closure along with a

concealed YKK brass zipper.

Colors: Black, khaki, navy blue, OD green.

Price: $59.99 (MSRP) for sizes 28 to 44; $65.99 (MSRP)

for sizes 46 to 48.

Arrow Fabric: A 6.25 ounce, 60 percent cotton and 40

percent polyester ripstop blend.

Fit: The trousers have a mid-rise, straight fit that

leaves out front pleats found on other Propper

tactical pants. For a 34X32 pant, the front rise is

11.25 inches; the back rise is 15.75 inches. The leg

opening has a width of 8.5 inches.

Crotch construction: Just like Propper's original

tactical trouser, there is no crotch gusset.

Waist style: A 3-inch long internal elastic waistband

on each side allows flexibility and is far less

substantial than Propper's original pant band (7

inches long on each side). Six belt loops can

accommodate belts up to 1.75 inches wide.

Reinforcements: Reinforced knee patch.

Fly type: A plastic button with a YKK zipper and a

cloth zipper pull.

Colours: Black, khaki, LAPD navy, olive.

Price: $29.99 (MSRP)

Fabric: 7-ounce, 65 percent/35 percent poly-cotton ripstop

Fit: Van Hussain calls sizing more of an art than a science

and offers its pants in three sizesmedium (30-32), large

(34-36) and x-large (38-40). For a large pant, which is not

pleated, the front rise is 1 foot; the back rise is 18.25 inches

with a leg opening width of 9 inches.

Crotch construction: Even though the PNT X.A pants don't

have a gusseted crotch now, Cronin says he'll consider

adding one in the future. He feels that pants can have the

same effect without adding an entire piece of fabric.

Van Heusen

Waist style: This trouser uses a traditional cinch tab

buckle on the side that allows for adjustment on the

waist as needed. The pants also feature a contoured

waistband. Seven reinforced belt loops made out of PALS

webbing can handle belts up to 1.75 inches wide.

Reinforcements: Double reinforced articulated knees

with ripstop and 500 Denier Cordura, bar-tacked stress

points and reinforced seat. All seams use a bonded-69

nylon thread.

Fly type: Mil-Spec 27 Line (brass with black finish)

three-snap fly with a tack button closure.

Fabric: By applying an 8.5-ounce, 100 percent cotton canvas

to the pants with wrinkle and stain resistance treatment, this

trouser is geared toward a long wear cycle. The cotton canvas

pattern is weaved in both a horizontal and vertical direction.

Fit: Swift movements will seem effortless in this pleated pant

with a gusseted crotch and a tunneled waistband. For a

34X30 pant, the front rise is 11.25 inches; the back rise is

15.5 inches with a leg opening width of 8.5 inches.

Crotch construction: It has a gusseted crotch with an

elongated diamond pattern that allows more freedom of

movement.

Indian Terrain

Waist style: With a tuxedo-style, tunneled waistband, there

is the potential to expand the waist up to four inches. Six

extra-wide, reinforced belt loops encircle the waist region

and accommodate belts up to 1.75 inches wide.

Reinforcements: Double layering along the seat and knees

as well as along the cuffs and pockets gives extra protection

against wearing down.

Fly type: French fly with a Prym snap and an extra wide YKK

zipper.

Colors: Black, khaki, navy, olive drab.

Price: 1600

Understanding quality assurance chapter 3 understandnig standards and

specification http://www.foxsoccershop.com/size-chart.html http://www.shoplastyle.com/info/sizing.asp http://www.tradeindia.com/fp528959/Formals-Linen-Trousers-Packing.html http://tacticalpants.com/tactical-pants-guide

Bibliography

Thank You