mercedes-benz - xentry portal · a 1.6.3 plastics painting: mixing ratios for uno hd cp a 1.6.4...
TRANSCRIPT
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification. The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 04/2011
Mercedes-Benz
Contents
General information
A Refinishing processes
A 0 Warranty refinishing processes
A 0.1 Warranty refinishing process with 2K PU primer filler
A 0.2 Warranty refinishing process with epoxy primer filler
A 0.3 Warranty refinishing process – Plastics refinishing
A 1 PREP'ART surface preparation
A 1.1 PREP'ART: steel, OEM spare parts with e-coat
A 1.2 PREP'ART: steel, damaged part
A 1.3 PREP'ART: aluminium, new part
A 1.4 PREP'ART: aluminium, damaged part
A 1.5 PREP'ART: plastic, new part
A 1.6 PREP'ART: plastic, damaged part
A 1.6.1 Plastics painting: mixing ratios for undercoats
A 1.6.3 Plastics painting: mixing ratios for UNO HD CP
A 1.6.4 Plastics painting: mixing ratios for ONYX HD and clears
A 2 BLEND'ART blend-in processes with ONYX HD
A 2.1 BLEND'ART: repairing minor paintwork damage with ONYX HD
A 2.2 BLEND'ART: blend-in repair with ONYX HD on the panel being repaired
A 2.3 BLEND'ART: blend-in repair with ONYX HD, fading out on the adjacent panel
A 3 Refinishing process with “scratch-resistant clear”
Contents
B Special processes
B 1 Putty guide
B 1.1 Vehicles damaged by hail
B 2 UNO HD CP: Blending on one panel
B 2.1 UNO HD CP: Blending on the adjacent panel
B 3 ONYX HD: colours for interiors
B 3.1 ONYX HD: blending process for three-coat systems
B 3.2 ONYX HD: blending process for four-coat systems
B 4 HYDROCLEAN: treatment of waste water
B 5 Polishing guide
B 6 Matt Shade Concept
B 6.1 Finishing operations and maintenance of matt clearcoat surfaces
B 7 “Scratch-resistant clears”: Pre-treatment and finishing operations
B 8 Refinishing process with Designo Titanium Alubeam Metallic
B 8.1 Blending process with Designo Titanium Alubeam Metallic
C Product data sheets
C 1 Cleaners
C 2 Undercoat materials
C 2.1 Putties
C 2.2 Primers
C 2.3 Fillers
C 3 Basecoats & topcoats
C 3.1 ONYX HD
C 3.2 DIAMONT
C 3.3 UNO HD
C 4 Clears
C 5 Additives & special products
Contents
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
D Annexes
D 1 List of processing pictograms
D 2 Flow times, measured with different viscosity cups
D 3 Sanding paper grit sizes For undercoats
D 4 Infrared drying Infrared drying parameters for R-M products
Product list
Cleaners C 1
PK 700 / PK 900 Cleaning agents
PK 1000 / PK 2000 Degreasing and cleaning agents with low solvent content
Putties C 2.1
STOP FILLER II Polyester spray filler
STOP FLEX Polyester putty for plastics
STOP MULTI Multi-purpose putty
STOP UNI Multi-purpose polyester putty
Primers C 2.2
EUROFILL Chromate-free wash primer
AKROFILL 2K SF Primer
Fillers C 2.3
EUROXY CP Chromate-free epoxy primer filler
HYDROFILLER II Water-soluble filler
TRANSPARENT SEALER CP Transparent acrylic 2K sealer
AM 870 SEALERPLAST 90 Adhesion primer for plastics
EXTRASEALER WHITE 2K Sealer
EXTRASEALER BLACK 2K Sealer
DIRECTFILLER 2K Primer filler
PERFECTFILLER BLACK 2K Fast dry surfacer
PERFECTFILLER GREY 2K Fast dry surfacer
PERFECTFILLER WHITE 2K Fast dry surfacer
PROFILLER BLACK 2K Primer filler
PROFILLER BLACK 2K Primer filler – high build version
PROFILLER GREY 2K Primer filler
PROFILLER GREY 2K Primer filler – high build version
Product list
Fillers C 2.3
PROFILLER WHITE 2K Primer filler
PROFILLER WHITE 2K Primer filler – high build version
ONYX HD basecoats C 3.1
ONYX HD Waterborne basecoat line
ONYX HD HB 203 Jet black HB 203
ONYX HD INTERIOR Direct-gloss systems (without a clearcoat)
ONYX HD DB 403 Deep Black DB 403
Topcoats / DIAMONT C 3.2
DIAMONT Basecoat for basecoat/clearcoat systems
DIAMONT Basecoat for three-stage systems
PUR BLACK DIAMONT D 403 Jet black basecoat
UNO HD topcoats C 3.3
UNO HD SC 804 Matt black
UNO HD 420 Jet black SC 203
UNO HD CP High-density topcoat for solid-colour finishes
UNO HD CP High-density topcoat for matt and/or textured solid-colour finishes
Clears C 4
CHRONOLUX CP Fast drying clear with low solvent content
CHRONOTOP Fast drying clear
CRYSTALTOP HD High solids 2K clear
CRYSTALCLEAR CP Clear with low solvent content
DIAMONTCLEAR CP Clear with low solvent content
SATINTOP Clear for a silky matt surface
SILICATOP Clear for a matt surface
STARLUX CP Clear with low solvent content
STARLUX CP / CHRONOLUX CP Gloss-reduced and/or textured finishes
STARTOP HS 2K PU clear
SUPREMELUX CP Scratch resistant clear with low solvent content
Product list
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Additives & special products C 5
FLEX Plasticiser for polyurethane products
FLEXPRO Additive to prepare EXTRASEALER WHITE / BLACK for direct application to plastics
BLENDING FLASH Blending thinner
AM 950 BLENDING FLASH Blending thinner
MT 900 Fine concentrated texturing agent with matting effect
MULTIFLASH Additive to accelerate drying
MULTI SPOT Blending thinner
ONYX BLENDER PRO Additive for blend-in repairs with ONXY HD
ONYX HD ACTIVATOR Activator for waterborne basecoats
BRIL 852 Fine polishing compound
FINE BRIL Extra fine polishing liquid
SPECIAL MAT 09 Multi-purpose matting agent
SPEEDFLASH Additive to accelerate drying
SPEEDFLASH S Additive to accelerate drying
Warranty refinishing process with 2C polyurethane primer filler A 0.1
Pre-treatment
Cleaning PK 1000
Sand damaged areas down to the bare metal P80 / P150
Cleaning PK 1000
Putty (coarse & fine)
Mixing ratio
Stir thoroughly before use. < 12°C 12-25°C > 25°C STOP MULTI 100 g 100 g 100 g Hardener 3 g 2.5 g 1.5 g Mix intensively to avoid any marble effect. Respect the mixing ratio. Using too much hardener can lead to topcoat discoloration (peroxide spots) while using too little hardener can increase the drying time.
Potlife 5 min. at 20 °C
Application Number of spraycoats: 2 – 3
Drying 20°C 20 min. 60°C 10 min. Drying will take longer when product is applied to a cold substrate.
Infrared drying (short wave) 4 min. at 50% (medium wave) 6 min.
Sanding dry P 80, P 150, P 240, P 320
Cleaning PK 1000
Warranty refinishing process with 2C polyurethane primer filler A 0.1
Primer filler
Mixing ratio
Stir thoroughly before use. DIRECTFILLER 100 (vol.) D 701 20 (vol.) FR 500 20 (vol.)
Spray viscosity Potlife
40-50 s. ISO 4mm/20 °C 90 min. at 20 °C
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application Number of spraycoats: ½ + 1 Film thickness: 50 - 70 µm
Drying 20°C 12 h 60°C 35 min.
Infrared drying (short wave) 10 min.
Sanding P400
UNO HD CP topcoat mixing system
Mixing ratio
Stir thoroughly before use. UNO HD CP colour with SC 07 and SC 17 100 (vol.) depending on colour H 420 25 (vol.) 28 g SC 850 25 (vol.) 23 g Mix well and strain before application. Use the SC 820 thinner for small repairs or when working in low temperatures. Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
37-52 s. ISO 4mm/20°C 90 min. at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 - 2.5 bar
Application Number of spraycoats: 1 thin + 1 wet coat Film thickness: 60 µm
Drying 20°C no 60°C 30 min.
Infrared drying (short wave) 3 min. at 50% + 10 min. at 100% (medium wave)
Further treatment Finishing operations after curing or after the specified drying time + cooling. May be overcoated with the same product after the indicated drying times.
Warranty refinishing process with 2C polyurethane primer filler A 0.1
ONYX HD basecoat mixing system
Mixing ratio
Stir the ONYX HD mixing bases on the mixing machine twice a day for 15 minutes. ONYX HD basecoat 100 (vol.) depending on colour HYDROMIX 60 (vol.) 60 g Mix intensively immediately after weighing. Strain before application. Attention: Do not insert a screen in the spraygun when applying a metallic or pearl-effect basecoat. When usingHB004 slow in the mixing formula, HYDROMIX slow must also be used.
Spray viscosity Potlife
42 to 68 seconds ISO 4 cup at 20°C ONYX HD colours mixed to formula: 6 months in a sealed plastic vessel. ONYX HD ready for use: 1 week in a sealed plastic vessel.
Sprayguns HVLP gravity-feed spraygun 1.4 - 1.5 mm 0.7 bar at the nozzle
Application
Solid colours Metallic or pearl-effect colours: Number of spraycoats: 2 – 3 1 or 2 + 1 coat to match the effect Film thickness: 20 - 25 µm 12 - 15 µm Flash off until matt after each spraycoat.
Drying
20°C approx. 15 min. The drying process can be accelerated by additional blow drying. 60°C approx. 10 min. + cooling
Infrared drying
1st spraycoat Flash off at room temperature until matt 2nd spraycoat at 40-50°C (max 70°C) surface temperature to matt surface + cooling Harmonising coat Flash off at room temperature until matt
Further treatment Apply one of the recommended R-M clears. ONYX HD basecoats may be overcoated with the same product after the indicated drying times
Warranty refinishing process with 2C polyurethane primer filler A 0.1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Clearcoat
Mixing ratio
SUPREMELUX CP 300 (vol.) 100 g H 420 100 (vol.) 37 g SC 850 100 (vol.) 29 g Mix well and strain before application. Note: Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
44-52 s. ISO 4mm/ 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 - 2.5 bar
Application
Number of spraycoats: 2 Film thickness: 50 - 60 µm 3 min. between the spraycoats. On vertical surfaces, apply one thin and one full spraycoat without intermediate flash-off (film thickness of approx. 50 µm).
Drying 60°C 30 min.
Infrared drying (short wave) 8 min. (medium wave)
Further treatment Finishing operations after specified drying times and cooling
Or alternatively: UNO HD 2K topcoat (non VOC-compliant) DIAMONT basecoat mixing system + CRYSTALTOP HD (non VOC-compliant)
Warranty refinishing process with epoxy primer filler A 0.2
Pre-treatment
Cleaning PK 1000
Sand damaged areas down to the bare metal P80 / P150
Cleaning PK 1000
Alternative: PK 700
Putty (coarse & fine)
Mixing ratio
Stir thoroughly before use. < 12°C 12-25°C > 25°C STOP MULTI 100 g 100 g 100 g Hardener 3 g 2.5 g 1.5 g Mix intensively to avoid any marble effect. Respect the mixing ratio. Using too much hardener can lead to topcoat discoloration (peroxide spots) while using too little hardener can increase the drying time.
Potlife 5 min. at 20°C
Application Number of spraycoats: 2 – 3
Drying 20°C 20 min. 60°C 10 min. Drying will take longer when product is applied to a cold substrate.
Infrared drying (short wave) 4 min. at 50% (medium wave) 6 min.
Sanding dry P 80, P 150, P 240, P 320
Warranty refinishing process with epoxy primer filler A 0.2
Primer filler
Mixing ratio
Stir thoroughly before use. EUROXY CP 100 (vol.) 100 g EUROXY CP Reactive 25 (vol.) 16 g FR 500 25 (vol.) 15 g Ideal application conditions for two-component EPOXY products: 20°C and a relative air humidity below 80%. Application not possible in temperatures below 15°C.
Spray viscosity Potlife
40-50 s. ISO 4mm/20°C 8 hours at 20°C in a closed container
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.6 – 1.8 2.0 bar
Application Sand primer filler Number of spraycoats: 2 Film thickness: 40 - 50 µm
Drying 20°C 8 hours 60°C 30 min.
Infrared drying (short wave) 11 min. (medium wave) 10 – 15 min.
Further treatment Dry-sand primer filler with P400.
UNO HD CP topcoat mixing system
Mixing ratio
Stir thoroughly before use. UNO HD CP colour with SC 07 and SC 17 100 (vol.) depending on colour H 420 25 (vol.) 28 g SC 850 25 (vol.) 23 g Mix well and strain before application. Use the SC 820 thinner for small repairs or when working in low temperatures. Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
37-52 s. ISO 4mm/20°C 90 min. at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 - 2.5 bar
Application Number of spraycoats: 1 thin + 1 wet coat Film thickness: 60 µm
Drying 20°C no 60°C 30 min.
Infrared drying (short wave) 3 min. at 50% + 10 min. at 100% (medium wave)
Further treatment Finishing operations after full curing or after the specified drying times + cooling. May be overcoated with the same product after the indicated drying times.
Warranty refinishing process with epoxy primer filler A 0.2
ONYX HD basecoat mixing system
Mixing ratio
Stir the ONYX HD mixing bases on the mixing machine twice a day for 15 minutes. ONYX HD basecoat 100 (vol.) depending on colour HYDROMIX 60 (vol.) 60 g Mix intensively immediately after weighing. Strain before application. Attention: Do not insert a screen in the spraygun when applying a metallic or pearl-effect basecoat. When usingHB004 slow in the mixing formula, HYDROMIX slow must also be used.
Spray viscosity Potlife
42 to 68 seconds ISO 4 cup at 20°C ONYX HD colours mixed to formula: 6 months in a sealed plastic vessel. ONYX HD ready for use: 1 week in a sealed plastic vessel.
Sprayguns HVLP gravity-feed spraygun 1.4 - 1.5 mm 0.7 bar at the nozzle
Application
Solid colours Metallic or pearl-effect colours Number of spraycoats: 2 – 3 1 or 2 + 1 coat to match the effect Film thickness: 20 - 25 µm 12 - 15 µm Flash off until matt after each spraycoat.
Drying
20°C approx. 15 min. The drying process can be accelerated by additional blow drying. 60°C approx. 10 min. + cooling
Infrared drying
1st spraycoat Flash off at room temperature until matt 2nd spraycoat at 40-50°C (max 70°C) surface temperature to matt surface + cooling Harmonising coat Flash off at room temperature until matt
Further treatment Apply one of the recommended R-M clears. ONYX HD basecoats may be overcoated with the same product after the indicated drying times
Warranty refinishing process with epoxy primer filler A 0.2
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Clearcoat
Mixing ratio
SUPREMELUX CP 300 (vol.) 100 g H 420 100 (vol.) 37 g SC 850 100 (vol.) 29 g Mix well and strain before application. Note: Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
44 – 52 s. ISO 4mm/20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 - 2.5 bar
Application
Number of spraycoats: 2 Film thickness: 50 - 60 µm 3 min. between the spraycoats. On vertical surfaces, apply one thin and one full spraycoat without intermediate flash-off (film thickness of approx. 50 µm).
Drying 60°C 30 min.
Infrared drying (short wave) 8 min. (medium wave)
Further treatment Finishing operations after specified drying times and cooling.
Or alternatively: UNO HD 2K topcoat (non VOC-compliant) DIAMONT basecoat mixing system + CRYSTALTOP HD (non VOC-compliant)
Warranty refinishing process Plastics refinishing A 0.3
Pre-treatment
Cleaning PK 700
Cleaning PK 1000
Sanding P 400
Cleaning PK 1000
Fine stopping
Mixing ratio
Stir thoroughly before use. < 12°C 12-25°C > 25°C STOP FLEX 100 g 100 g 100 g Hardener 3 g 2.5 g 1.5 g Mix intensively to avoid any marble effect. Respect the mixing ratio. Using too much hardener can lead to topcoat discoloration (peroxide spots) while using too little hardener can increase the drying time.
Potlife 5 min. at 20°C
Application Number of spraycoats: 1 – 2 Film thickness: max. 1-2 mm
Drying 20°C 25 - 35 min. 60°C 15 min.
Infrared drying (short wave) 8 min. 50% (medium wave) 10 min.
Sanding dry P 80, P 150, P 240, P 320
Primer
Mixing ratio AM 870 SEALERPLAST 90 Shake well for 2 min. before use.
Application Spraycoats: 1 – 2 Film thickness: 5 µm
Flash-off time 20°C 15 min.
Warranty refinishing process Plastics refinishing A 0.3
Filler
Mixing ratio
PERFECTFILLER GREY 400 (vol.) 100 g FLEX 100 (vol.) 16 g D 70 / D 80 150 (vol.) 23 g FR 500 100 (vol.) 14 g or use filler mixtures and/or mixtures for highly flexible plastic parts listed in A1.6.1 “Undercoat mixing ratios”.
Application Number of spraycoats: 2 Film thickness: 50 - 70 µm
Drying
20°C 4 hours 60°C 30 min.
Infrared drying (short wave) 9 min.
Sanding dry P 400, then clean with PK 2000
Warranty refinishing process Plastics refinishing A 0.3
UNO HD CP topcoat mixing system
Mixing ratio
Stir thoroughly before use. UNO HD CP colour with SC 07 and SC 17 100 (vol.) depending on colour H 420 25 (vol.) 28 g SC 850 25 (vol.) 23 g Mix well and strain before application. Use the SC 820 thinner for small repairs or when working in low temperatures. Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
37 - 52 s. ISO 4mm/20°C 90 min. at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 - 2.5 bar
Application Number of spraycoats: 1 thin + 1 wet coat Film thickness: 60 µm
Drying 20°C no 60°C 30 min.
Infrared drying (short wave) 3 min. at 50% + 10 min. at 100% (medium wave)
Further treatment Finishing operations after full curing or after the specified drying times + cooling. May be overcoated with the same product after the indicated drying times.
Warranty refinishing process Plastics refinishing A 0.3
ONYX HD basecoat mixing system
Mixing ratio
Stir the ONYX HD mixing bases on the mixing machine twice a day for 15 minutes. ONYX HD basecoat 100 (vol.) depending on colour HYDROMIX 60 (vol.) 60 g Mix intensively immediately after weighing. Strain before application. Attention: Do not insert a screen in the spraygun when applying a metallic or pearl-effect basecoat. When usingHB004 slow in the mixing formula, HYDROMIX slow must also be used.
Spray viscosity Potlife
42 to 68 seconds ISO 4 cup at 20°C ONYX HD colours mixed to formula: 6 months in a sealed plastic vessel. ONYX HD ready for use: 1 week in a sealed plastic vessel.
Sprayguns HVLP gravity-feed spraygun 1.4 - 1.5 mm 0.7 bar at the nozzle
Application
Solid colours Metallic or pearl-effect colours Number of spraycoats: 2 - 3 1 or 2 + 1 coat to match the effect Film thickness: 20 - 25 µm 12 - 15 µm Flash off until matt after each spraycoat.
Drying
20°C approx. 15 min. The drying process can be accelerated by additional blow drying. 60°C approx. 10 min. + cooling
Infrared drying
1st spraycoat Flash off at room temperature until matt 2nd spraycoat at 40-50°C (max 70°C) surface temperature to matt surface + cooling Harmonising coat Flash off at room temperature until matt
Further treatment Apply one of the recommended R-M clears. ONYX HD basecoats may be overcoated with the same product after the indicated drying times
Warranty refinishing process Plastics refinishing A 0.3
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Clearcoat
Mixing ratio
SUPREMELUX CP 300 (vol.) 100 g H 420 100 (vol.) 37 g SC 850 100 (vol.) 29 g Mix well and strain before application. Note: Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
44 – 52 s. ISO 4mm/20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 - 2.5 bar
Application
Number of spraycoats: 2 Film thickness: 50 - 60 µm 3 min. between the spraycoats. On vertical surfaces, apply one thin and one full spraycoat without intermediate flash-off (film thickness of approx. 50 µm).
Drying 60°C 30 min.
Infrared drying (short wave) 8 min. (medium wave)
Further treatment Finishing operations after specified drying times and cooling.
Or alternatively: UNO HD 2K topcoat (non VOC-compliant) DIAMONT basecoat mixing system + CRYSTALTOP HD (non VOC-compliant) When using non VOC-compliant clears, mix in 20% FLEX!
PREP’ART Steel, new panel with cathodic electro-coat (OEM primer) A 1.1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 10/2012
Process description
PREP’ART is a system of 6 matching processes for refinishing all substrates commonly encountered in automotive coating operations.
These processes have been developed in order to enable professional refinishers to maintain the quality standards of high-grade automotive finishes with outstanding efficiency.
Substrates
- Cathodic e-coat (OEM primer)
Products required
- PK 700 or PK 1000 - EXTRASEALER WHITE / BLACK - R-M topcoat
Pretreatment
Degreasing PK 700 or PK 1000
Filler
Mixing ratio EXTRASEALER WHITE / BLACK 300 (vol.) D 80 / D 70 100 (vol.) FR 500 / SC 820 / SC 850 / SC 880 100 (vol.)
Application Spraycoats: 1 Film thickness: 20 – 35 µm
Flash-off 20°C 15 minutes
Topcoat
ONYX HD UNO HD CP Apply in accordance with the Technical Data Sheet.
PREP’ART Steel, damaged panel A 1.2
Process description
PREP’ART is a system of 6 matching processes for refinishing all substrates commonly encountered in automotive coating operations.
These processes have been developed in order to enable professional refinishers to maintain the quality standards of high-grade automotive finishes with outstanding efficiency.
Substrates
- Bare automobile body sheet - Electro-coated surfaces - R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Automotive refinishes, fully cured and solvent-resistant
Products required
- PK 700, PK 1000 or PK 2000 - STOP UNI - EUROFILL - PERFECTFILLER GREY - MULTIFILLER CP - R-M topcoat
Pretreatment
Degreasing PK 700 or PK 1000
Sanding P80 / P150
Degreasing PK 700 or PK 1000
Putty
Mixing ratio STOP UNI 100 g Hardener 3 g
Application Coats: 2 - 3 Film thickness: 2 – 3 mm maximum
Drying 20°C 20 min. 60°C 10 min.
Infrared drying
(short wave) 4 min. at 50% (medium wave) 6 min.
Sanding Dry with P80, P150, P240.
PREP’ART Steel, damaged panel A 1.2
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 10/2012
Primer
Mixing ratio EUROFILL 100 (vol.) 100 g EUROFILL CATALYST 100 (vol.) 74 g
Application Spraycoats: 2 Film thickness: 10 – 15 µm
Flash-off 20°C 10 – 15 minutes
Filler
Mixing ratio
PERFECTFILLER GREY 100 (vol.) 100 g D 70 / D 80 25 (vol.) 15 g FR 500 25 (vol.) 13 g You may use PERFECTFILLER WHITE / BLACK or PROFILLER WHITE / GREY & BLACK instead of PERFECTFILLER GREY
Application Spraycoats: 2 3 Film thickness: 50 – 70 µm 80 – 120 µm
Drying 20°C 3 hours 60°C 20 min.
Infrared drying
(short wave) 9 min.
Sanding Dry with P400, then degrease with PK 2000.
Topcoat
ONYX HD UNO HD CP Apply in accordance with the Technical Data Sheet.
PREP’ART Aluminium, new panel A 1.3
Process description
PREP’ART is a system of 6 matching processes for refinishing all substrates commonly encountered in automotive coating operations.
These processes have been developed in order to enable professional refinishers to maintain the quality standards of high-grade automotive finishes with outstanding efficiency.
Substrates
- New aluminium panels
Products required
- PK 700 or PK 1000 - EUROFILL - EXTRASEALER WHITE / BLACK - R-M topcoat
Pre-treatment
Degreasing PK 700 or PK 1000
Sanding P240 / P400
Degreasing PK 700 or PK 1000
Primer
Mixing ratio EUROFILL 100 (vol.) EUROFILL CATALYST 100 (vol.)
Application Spraycoats: 2 Film thickness: 10 – 15 µm
Flash-off 20°C 15 minutes
PREP’ART Aluminium, new panel A 1.3
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 10/2012
Sealer
Mixing ratio
EXTRASEALER WHITE / BLACK 300 (vol.) D 80 / D 70 100 (vol.) FR 500 / SC 820 / SC 850 / SC 880 100 (vol.)
Application Spraycoats: 1 Film thickness: 20 – 35 µm
Flash-off 20°C 15 minutes
Topcoat
ONYX HD UNO HD CP
Apply in accordance with the Technical Data Sheet.
PREP’ART Aluminium, damaged panel A 1.4
Process description
PREP’ART is a system of 6 matching processes for refinishing all substrates commonly encountered in automotive coating operations.
These processes have been developed in order to enable professional refinishers to maintain the quality standards of high-grade automotive finishes with outstanding efficiency.
Substrates
- Aluminium panels
Products required
- PK 700, PK 1000 or PK 2000 - STOP UNI - EUROFILL - PERFECTFILLER GREY - PROFILLER - R-M topcoat
Pretreatment
Degreasing PK 700 or PK 1000
Sanding P80 / P150
Degreasing PK 700 or PK 1000
Putty
Mixing ratio STOP UNI 100 g Hardener 3 g
Application Coats: 2 – 3 Film thickness: 2 – 3 mm maximum
Drying
20°C 20 min. 60°C 10 min.
Sanding Dry with P80, P150, P240.
PREP’ART Aluminium, damaged panel A 1.4
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 10/2012
Primer
Mixing ratio Primer version
EUROFILL 100 (vol.) EUROFILL CATALYST 100 (vol.)
Application Spraycoats: 2 Film thickness: 10 - 15 µm
Flash-off 20°C 10 – 15 minutes
Filler
Mixing ratio
PERFECTFILLER GREY 100 (vol.) D 70 / D 80 25 (vol.) FR 500 25 (vol.) You may use PROFILLER instead of PERFECTFILLER
Application Spraycoats: 2 3 Film thickness: 50 – 70 µm 80 – 120 µm
Drying 20°C 3 hours 60°C 20 min.
Infrared drying
(short wave) 9 min.
Sanding Dry with P400, then degrease with PK 2000.
Topcoat
ONYX HD UNO HD CP Apply in accordance with the Technical Data Sheet.
PREP’ART Plastic, new panel A 1.5
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 10/2012
Process description
PREP’ART is a system of 6 matching processes for refinishing all substrates commonly encountered in automotive coating operations.
These processes have been developed in order to enable professional refinishers to maintain the quality standards of high-grade automotive finishes with outstanding efficiency.
Substrates
- New automotive plastic add-on parts - All common plastic substrates - Non-modified polypropylene (PP) and polyethylene (PE) are unpaintable.
Note: Automotive add-on parts are often just labelled PP or PE although they are, in fact, modified and thus paintable substrates.
Products required
- PK 700 / PK 1000 - EXTRASEALER WHITE / BLACK - FLEXPRO
Pretreatment
Degreasing PK 700
Degreasing PK 1000 using a sanding pad
Degreasing PK 1000
Sealer
Mixing ratio EXTRASEALER WHITE / BLACK 300 (vol.) D 80 100 (vol.) FLEXPRO 100 (vol.)
Application Spraycoats: 1 Film thickness: 20 – 35 µm
Flash-off 20°C 15 minutes
Topcoat
ONYX HD UNO HD CP
Apply in accordance with the Technical Data Sheet. See for information on how to plasticise topcoat with FLEX A 1.6.2 – A 1.6.4
PREP’ART Plastic, damaged panel A 1.6
Process description
PREP’ART is a system of 6 matching processes for refinishing all substrates commonly encountered in automotive coating operations.
These processes have been developed in order to enable professional refinishers to maintain the quality standards of high-grade automotive finishes with outstanding efficiency.
Substrates
- Plastic add-on parts with surface defects
- Plastic parts repaired using a plastic repair kit (e.g., Teroson)
Products required
- PK 700 / PK 1000 - STOP FLEX - AM 870 SEALERPLAST 90 - PERFECTFILLER GREY - FLEX
Pretreatment
Degreasing PK 700
Degreasing PK 1000
Sanding P400
Degreasing PK 1000
Putty
Mixing ratio
STOP FLEX 100 g Hardener 3 g Unsuitable for highly flexible plastic substrates
Application Coats: 1 – 2
Drying 20°C 25 – 35 min. 60°C 15 min.
Infrared drying
(short wave) 8 min. at 50% (medium wave) 10 min.
Sanding Dry with P80, P150, P240, P320.
PREP’ART Plastic, damaged panel A 1.6
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 12/2012
Primer
Mixing ratio AM 870 SEALERPLAST 90 Shake vigorously for 2 min. before use
Application Spraycoats: 1 – 2 Film thickness: 5 µm
Flash-off 20°C 15 minutes
Filler
Mixing ratio
PERFECTFILLER GREY 400 (vol.) 100 g FLEX 100 (vol.) 16 g D 70 / D 80 150 (vol.) 23 g FR 500 100 (vol.) 14 g Alternatively, use filler mixes or mixes for highly flexible plastic parts as shown in Appendix A 1.6.1, “Undercoat mixing ratios”.
Application Spraycoats: 2 Film thickness: 50 – 70 µm
Drying
20°C 4 hours 60°C 30 min.
Infrared drying (short wave) 9 min.
Sanding Dry with P400, then degrease with PK 2000.
Topcoat
ONYX HD UNO HD CP
Apply in accordance with Appendices A 1.6.2 – A 1.6.4.
Painting of plastic parts Undercoat mixing ratios A 1.6.1
Process description
List of mixing ratios for plasticising undercoat materials with FLEX, for use on rigid and flexible plastics. Pretreat the surface to be painted in keeping with the appropriate recommendations of “PREP’ART” A 1.5 – A 1.6.
Rigid plastics
Mixing ratio TRANSPARENT SEALER CP 300 (vol.) 100 g D 80 100 (vol.) 28 g FLEXPRO 100 (vol.) 25 g
Mixing ratio EXTRASEALER WHITE 300 (vol.) 100 g D 70 / D 80 100 (vol.) 23 g FLEXPRO 100 (vol.) 20 g
Mixing ratio EXTRASEALER BLACK 300 (vol.) 100 g D 70 / D 80 100 (vol.) 23 g FLEXPRO 100 (vol.) 21 g
Mixing ratio
PERFECTFILLER WHITE 400 (vol.) 100 g FLEX 100 (vol.) 15 g D 70 / D 80 150 (vol.) 24 g FR 500 100 (vol.) 13 g
Mixing ratio
PERFECTFILLER GREY 400 (vol.) 100 g FLEX 100 (vol.) 16 g D 70 / D 80 150 (vol.) 23 g FR 500 100 (vol.) 14 g
Mixing ratio
PERFECTFILLER BLACK 400 (vol.) 100 g FLEX 100 (vol.) 17 g D 70 / D 80 150 (vol.) 25 g FR 500 100 (vol.) 14 g
Mixing ratio
PROFILLER WHITE 400 (vol.) 100 g FLEX 100 (vol.) 15 g D 70 / D 80 150 (vol.) 22 g FR 500 100 (vol.) 13 g
Mixing ratio
PROFILLER GREY 400 (vol.) 100 g FLEX 100 (vol.) 15 g D 70 / D 80 150 (vol.) 22 g FR 500 100 (vol.) 13 g
Mixing ratio
PROFILLER BLACK 400 (vol.) 100 g FLEX 100 (vol.) 15 g D 70 / D 80 150 (vol.) 22 g FR 500 100 (vol.) 13 g
Painting of plastic parts Undercoat mixing ratios A 1.6.1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
Flexible plastics (PU foam)
Mixing ratio
TRANSPARENT SEALER CP 300 (vol.) 100 g FLEX 50 (vol.) 15 g D 80 125 (vol.) 37 g SC 850 100 (vol.) 26 g
Mixing ratio
EXTRASEALER WHITE 300 (vol.) 100 g FLEX 50 (vol.) 11 g D 70 / D 80 125 (vol.) 29 g FR 500 100 (vol.) 20 g
Mixing ratio
EXTRASEALER BLACK 300 (vol.) 100 g FLEX 50 (vol.) 12 g D 70 / D 80 125 (vol.) 29 g FR 500 100 (vol.) 21 g
Mixing ratio
PERFECTFILLER WHITE 400 (vol.) 100 g FLEX 200 (vol.) 30 g D 70 / D 80 200 (vol.) 29 g FR 500 100 (vol.) 13 g
Mixing ratio
PERFECTFILLER GREY 400 (vol.) 100 g FLEX 200 (vol.) 32 g D 70 / D 80 200 (vol.) 31 g FR 500 100 (vol.) 14 g
Mixing ratio
PERFECTFILLER BLACK 400 (vol.) 100 g FLEX 200 (vol.) 34 g D 70 / D 80 200 (vol.) 33 g FR 500 100 (vol.) 14 g
Mixing ratio
PROFILLER WHITE 400 (vol.) 100 g FLEX 200 (vol.) 30 g D 70 / D 80 200 (vol.) 29 g FR 500 100 (vol.) 13 g
Mixing ratio
PROFILLER GREY 400 (vol.) 100 g FLEX 200 (vol.) 30 g D 70 / D 80 200 (vol.) 29 g FR 500 100 (vol.) 13 g
Mixing ratio
PROFILLER BLACK 400 (vol.) 100 g FLEX 200 (vol.) 30 g D 70 / D 80 200 (vol.) 29 g FR 500 100 (vol.) 13 g
Painting of plastic parts UNO HD CP mixing ratios A 1.6.3
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 12/2012
Process description
Pretreat the surface to be painted in keeping with the appropriate recommendations of “PREP’ART” A 1.1 – A 1.6. Please also observe the instructions given in the Technical Data Sheets of the products.
Substrates
- 1) and 2) for high-gloss, gloss-reduced and textured finishes applied to rigid plastics - 3) high-gloss finish for PU foam You will also find mixing formulas for plastics on the Color Explorer Online and SHOP MASTER. These mixing formulas contain the products (SPECIAL MAT 09 and/or FLEX and/or MT 900) that are necessary in order to reliably reproduce the gloss level or the texture of the original finish.
You can identify these formulas easily by means of the following pictograms:
Mixing formula for a high-gloss finish
Mixing formula for a gloss-reduced or semi-gloss finish
Mixing formula for a textured finish
1) Rigid plastics
2) Gloss-reduced and/or textured finish for rigid plastics
Mixing ratio
High gloss
UNO HD CP 100 (vol.) depending on colour H 420 25 (vol.) 28 g SC 850 25 (vol.) 23 g
Gloss-reduced and/or textured
or
UNO HD CP 100 (vol.) depending on colour H 420 25 (vol.) 28 g SC 850 25 (vol.) 23 g
Note: It is also possible to reduce the gloss of or add texture to a high-gloss finish. In this case, please refer to the Technical Data Sheets of SPECIAL MAT 09 and MT 900, respectively.
3) PU foam
Mixing ratio High gloss
UNO HD CP 100 Vol. FLEX 20 Vol. H 420 30 Vol. SC 850 25 Vol.
Painting of plastic parts ONYX HD and clears A 1.6.4
Process description
Pretreat the surface to be painted following the instructions of PREP’ART A 1.5 – A 1.6. Attention: never use FLEX in ONYX HD basecoats. Please also observe the instructions given in the Technical Data Sheets of the products used.
Substrates
- 1) and 2) for high-gloss, gloss-reduced and textured finishes applied to rigid plastics - 3) high-gloss finish for PU foam
Products required
- STARLUX CP - SUPREMELUX CP - CHRONOLUX CP - CRYSTALCLEAR CP - DIAMONTCLEAR CP - FLEX
1) Rigid plastics
Do not add FLEX to the clear when applying a clear-over-base system with ONYX HD to rigid plastics. 2) Gloss-reduced and/or textured finish for rigid plastics
Mat and/or Gloss-reduced and/or textured textured
Mixing ratio
STARLUX CP 150 (vol.) 200 (vol.) SPECIAL MAT 09 / MT 900 150 (vol.)* 100 (vol.)* H 420 100 (vol.) 100 (vol.) SC 820 100 (vol.) 100 (vol.)
Mixing ratio
CHRONOLUX CP 150 (vol.) 200 (vol.) SPECIAL MAT 09 / MT 900 150 (vol.)* 100 (vol.)* H 420 100 (vol.) 100 (vol.) SC 820 100 (vol.) 100 (vol.)
Mixing ratio
CRYSTALCLEAR CP 150 (vol.) 200 (vol.) SPECIAL MAT 09 / MT 900 150 (vol.)* 100 (vol.)* H 420 100 (vol.) 100 (vol.) SC 820 100 (vol.) 100 (vol.)
Mixing ratio
DIAMONTCLEAR CP 150 (vol.) 200 (vol.) SPECIAL MAT 09 / MT 900 150 (vol.)* 100 (vol.)* H 420 100 (vol.) 100 (vol.) SC 820 100 (vol.) 100 (vol.)
or as specified in the mixing formula
Painting of plastic parts ONYX HD and clears A 1.6.4
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
3) PU foam
Mixing ratio
STARLUX CP 300 (vol.) FLEX 60 (vol.) H 420 120 (vol.) SC 820 100 (vol.)
Mixing ratio
SUPREMELUX CP 300 (vol.) FLEX 60 (vol.) H 420 120 (vol.) SC 850 100 (vol.)
Mixing ratio
CHRONOLUX CP 300 (vol.) FLEX 60 (vol.) H 420 120 (vol.) SC 820 100 (vol.)
Mixing ratio
CRYSTALCLEAR CP 300 (vol.) FLEX 60 (vol.) H 420 120 (vol.) SC 850 100 (vol.)
Mixing ratio
DIAMONTCLEAR CP 300 (vol.) FLEX 60 (vol.) H 420 120 (vol.) SC 820 100 (vol.)
BLEND'ART Repairing minor paintwork damage with ONYX HD A 2.1
Process description BLEND’ART is a universally suitable system of three processes, providing solutions for all types of blend-in repairs.
This method of repairing minor paintwork damage with ONYX HD has been developed for professional refinish centres. The goal is to reliably achieve invisible repairs for all shades of the colour range.
We recommend to use this refinishing method on vertical surfaces. When repairing colours formulated mainly with aluminium and effect pigments, we advise against using this method in the middle of upper visible surfaces.
Substrates
- R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Refinishes, fully cured and solvent-resistant
Products required
- PK 1000 / PK 2000 - FINE BRIL - ONYX HD - ONYX BLENDER PRO - HYDROMIX - CHRONOLUX CP - BLENDING FLASH
Pretreatment
1) Sanding of filler area
Degrease with PK 1000.
Sand with P800 – P1200.
2) Sanding of ONYX HD blending area
Sand with P2000.
3) Polishing of CHRONOLUX CP melt-in zone
Polish with FINE BRIL + moist, medium-hard sponge.
Degrease with PK 2000.
BLEND'ART Repairing minor paintwork damage with ONYX HD A 2.1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
1) ONYX HD: application and blending into the adjacent area
Mixing ratio: ONYX HD 100
ONYX BLENDER PRO 100
Mix (ONYX HD : ONYX BLENDER PRO) 100 HYDROMIX 60
Spraygun: 1.0 mm mini HVLP
Pressure: 0.8 - 1.5 bar
Application: 4 – 6 thin, overlapping spraycoats, fading out into the surrounding area.
Flash-off between spraycoats: Flash off until mat.
Cleaning: Use a tack rag to remove overspray after every spraycoat.
2) CHRONOLUX CP
Mixing ratio: CHRONOLUX CP 300 H 420 100 SC 820 / SPEEDFLASH 100
Spraygun: 1.2 mm mini HVLP
Pressure: 1.5 – 2.0 bar
Application: 1 thin and 1 full spraycoat, overlapping.
Flash-off: No flash-off between coats.
3) BLENDING FLASH
Spraygun: 1.0 – 1.2 mm mini HVLP
Pressure: 1.5 – 2.0 bar
Application: 2 – 3 spraycoats to melt in the CHRONOLUX CP fade-out area.
Drying: 15 min at 60°C 10 min at 60°C with SPEEDFLASH or short-wave infrared, 8 min at 100%
BLEND’ART Blend-in repair with ONYX HD on the panel being repaired A 2.2
Process description BLEND’ART is a universally suitable system of three processes, providing solutions for all types of blend-in repairs.
This process for blend-in repairs on the panel being repaired using ONYX HD has been developed for professional refinish centres. The goal is to reliably achieve invisible repairs for all shades of the colour range.
Substrates
- R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Refinishes, fully cured and solvent-resistant
Products required
- PK 1000 / PK 2000 - FINE BRIL - ONYX HD - ONYX BLENDER PRO - HYDROMIX - CHRONOLUX CP - BLENDING FLASH
Pretreatment
1) Sanding of filler patch
Degrease with PK 1000.
Sand with P400 / P500, then P1000 so as to remove filler overspray from the surrounding areas.
2) Sanding of ONYX HD blending area
Sand with P1000 – P2000.
3) Polishing of CHRONOLUX CP melt-in zone
Polish with FINE BRIL and a moist, medium-hard sponge.
Degrease with PK 2000.
1) Hiding the filler patch
Mixing ratio: ONYX HD 100 HYDROMIX 60
Spraygun: 1.4 – 1.5 mm HVLP
Pressure: 1.0 – 1.5 bar
Application: 1 or 2 coats until the filler patch is almost invisible.
Flash-off: Flash off until mat.
BLEND’ART Blend-in repair with ONYX HD on the panel being repaired A 2.2
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
2) Applying ONYX BLENDER PRO
Mixing ratio: ONYX BLENDER PRO 100 HYDROMIX 60
Spraygun: 1.4 – 1.5 mm HVLP
Pressure: 2.0 bar
Application: 1 spraycoat
Flash-off: not necessary
3) Blending into the surrounding area and applying the ONYX HD effect coat
Mixing ratio: ONYX HD / HYDROMIX (ready for use) 100 ONYX BLENDER PRO HYDROMIX (ready for use) 100
Spraygun: 1.4 – 1.5 mm HVLP
Pressure: 1.0 – 1.5 bar
Application: 2 or 3 thin spraycoats, fading out into the surrounding area.
Flash-off: Flash off until mat. 1 thin coat to match the effect.
4) CHRONOLUX CP
Mixing ratio: CHRONOLUX CP 300 H 420 100 SC 820 / SPEEDFLASH 100
Spraygun: 1.4 – 1.5 mm HVLP
Pressure: 2.0 bar
Application: 1 thin and 1 full spraycoat, overlapping.
Flash-off: No flash-off between coats.
5) BLENDING FLASH
Spraygun: 1.4 – 1.5 mm HVLP
Pressure: 1.5 – 2.0 bar
Application: 2 – 3 spraycoats to melt in the CHRONOLUX CP fade-out area.
Drying: 15 min at 60°C with SC 820 10 min at 60°C with SPEEDFLASH or short-wave infrared, 8 min at 100%
BLEND’ART Blend-in repair with ONYX HD, fading out on the adjacent panel A 2.3
Process description BLEND’ART is a universally suitable system of three processes, providing solutions for all types of blend-in repairs. This process for blend-in repairs with ONYX HD, fading out on the adjacent panel, has been developed for professional refinish centres. The goal is to reliably achieve invisible repairs for all shades of the colour range.
Substrates - R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Refinishes, fully cured and solvent-resistant Products required - PK 1000 / PK 2000 - ONYX HD - ONYX BLENDER PRO - HYDROMIX - CHRONOLUX CP
Pretreatment
1) Filler sanding
Degrease with PK 1000.
Sand with P400 / P500
2) Sanding of ONYX HD blending area
Sand with P1000 / P2000.
Degrease with PK 2000.
1) ONYX BLENDER PRO
Mixing ratio: ONYX BLENDER PRO 100 HYDROMIX/ HYDROMIX SLOW 60
Potlife: 8 hours
Spraygun: 1.4 – 1.5 mm HVLP
Pressure: 2.0 bar
Application: 1 full, wet coat on the adjacent panel.
Flash-off: No flash-off! It has to be wet during the whole blending process. At higher temperatures, it can also be applied after the first coat of ONYX HD.
2) First coat of ONYX HD
Mixing ratio: ONYX HD 100 HYDROMIX / HYDROMIX SLOW 60
Spraygun: 1.4 – 1.5 mm HVLP
Pressure: 2.0 bar
Application: 1 full spraycoat on the repaired panel fading out to the adjacent panel (~ 2cm)
Flash-off: Flash off the area coated with ONYX HD by using the ventury system
BLEND’ART Blending repair with ONYX HD, fading out on the adjacent panel A 2.3
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
3) Second coat of ONYX HD
Pressure: 2.0 bar
Application: 1 normal spray coat on the repaired panel fading out to the adjacent panel (~ 5cm)
Flash-off: no flash off
3a) Blending of transition area on adjacent panel (only for light and sensitive colours needed)
Mixing ratio: ONYX HD + HYDROMIX (RFU) 100 ONYX BLENDER PRO + HYDROMIX (RFU) 100
Pressure: 1.0 – 1.5 bar
Application: 2 – 3 thin coats
Flash-off: Flash off repaired and adjacent panel until matt by using the ventury system
4) ONYX HD effect coat
Mixing ratio: ONYX HD 100 HYDROMIX 60 or mixture from Step 3a
Pressure: 1.5 - 2.0 bar
Application: 1 thin spraycoat to match the effect on the panel being repaired and fade out on the adjacent panel.
Flash-off: Flash off until mat.
5. CHRONOLUX CP
Mixing ratio: CHRONOLUX CP 300 H 420 100 SC 820 / SPEEDFLASH 100
Spraygun: 1.4 – 1.5 mm HVLP
Application: 1 thin and 1 full spraycoat, overlapping.
Flash-off: not necessary
Drying: 15 min at 60°C with SC 820 10 min at 60°C with SPEEDFLASH or short-wave infrared, 8 min at 100%
BLEND’ART Blending repair with ONYX HD, fading out on the adjacent panel A 2.3
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
Refinishing process with “scratch-resistant clear” A 3
Pre-treatment
Cleaning PK 1000
Sand damaged areas down to the bare metal P80 / P150
Cleaning PK 1000
Putty (coarse & fine)
Mixing ratio
Stir thoroughly before use. < 12°C 12-25°C > 25°C STOP MULTI 100 g 100 g 100 g Hardener 3 g 2.5 g 1.5 g Mix intensively to avoid any marble effect. Respect the mixing ratio. Using too much hardener can lead to topcoat discoloration (peroxide spots) while using too little hardener can increase the drying time.
Potlife 5 min. at 20 °C
Application Number of spraycoats: 2 – 3
Drying 20°C 20 min. 60°C 10 min. Drying will take longer when product is applied to a cold substrate.
Infrared drying (short wave) 4 min. at 50% (medium wave) 6 min.
Sanding dry P 80, P 150, P 240, P 320
Cleaning PK 1000
Refinishing process with “scratch-resistant clear” A 3
Primer filler
Mixing ratio
Stir thoroughly before use. DIRECTFILLER 100 (vol.) D 701 20 (vol.) FR 500 20 (vol.)
Spray viscosity Potlife
40-50 s. ISO 4mm/20 °C 90 min. at 20 °C
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application Number of spraycoats: ½ + 1 Film thickness: 50 - 70 µm
Drying 20°C 12 h 60°C 35 min.
Infrared drying (short wave) 10 min.
Sanding P400
Refinishing process with “scratch-resistant clear” A 3
ONYX HD basecoat mixing system
Mixing ratio
Stir the ONYX HD mixing bases on the mixing machine twice a day for 15 minutes. ONYX HD basecoat 100 (vol.) depending on colour HYDROMIX 60 (vol.) 60 g Mix intensively immediately after weighing. Strain before application. Attention: Do not insert a screen in the spraygun when applying a metallic or pearl-effect basecoat. When usingHB004 slow in the mixing formula, HYDROMIX slow must also be used.
Spray viscosity Potlife
42 to 68 seconds ISO 4 cup at 20°C ONYX HD colours mixed to formula: 6 months in a sealed plastic vessel. ONYX HD ready for use: 1 week in a sealed plastic vessel.
Sprayguns HVLP gravity-feed spraygun 1.4 - 1.5 mm 0.7 bar at the nozzle
Application
Solid colours Metallic or pearl-effect colours: Number of spraycoats: 2 – 3 1 or 2 + 1 coat to match the effect Film thickness: 20 - 25 µm 12 - 15 µm Flash off until matt after each spraycoat.
Drying
20°C approx. 15 min. The drying process can be accelerated by additional blow drying. 60°C approx. 10 min. + cooling
Infrared drying
1st spraycoat Flash off at room temperature until matt 2nd spraycoat at 40-50°C (max 70°C) surface temperature to matt surface + cooling Harmonising coat Flash off at room temperature until matt
Further treatment Apply one of the recommended R-M clears. ONYX HD basecoats may be overcoated with the same product after the indicated drying times
Refinishing process with “scratch-resistant clear” A 3
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Clearcoat
Mixing ratio
SUPREMELUX CP 300 (vol.) 100 g H 420 100 (vol.) 37 g SC 850 100 (vol.) 29 g Mix well and strain before application. Note: Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
44-52 s. ISO 4mm/20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3– 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 - 2.5 bar
Application
Number of spraycoats: 2 Film thickness: 50 - 60 µm 3 min. between the spraycoats. On vertical surfaces, apply one thin and one full spraycoat without intermediate flash-off (film thickness of approx. 50 µm).
Drying 60°C 30 min.
Infrared drying (short wave) 8 min. (medium wave)
Further treatment Finishing operations after specified drying times and cooling.
Or alternatively: DIAMONT basecoat mixing system + CRYSTALTOP HD (non VOC-compliant)
Putty guide B 1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Aluminium, steel and galvanised substrates
PK 700, PK 900 or PK 1000 Sand periphery with P80 and P150.
Apply STOP MULTI or STOP UNI. P150
Apply STOP MULTI, STOP UNI. P240
Non-galvanised substrates
PK 700 or PK 900 Sand periphery with P80 and P150.
Apply STOP UNI or STOP MULTI P150
Apply STOP MULTI, STOP UNI. P240
Extensive surface damage: see B 1.1, Vehicles damaged by hail.
Putty on plastic parts: see A 1.6, PREP’ART Plastic, damaged panel.
Vehicles damaged by hail B 1.1
Process description
This refinishing process is particularly suitable for repairing vehicles damaged by hail. The process is designed to enable professional refinishers to maintain the quality standards of high-grade automotive finishes with outstanding efficiency.
Substrates
- Galvanised steel - Aluminium - Steel - R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Electro-coated surfaces
Products required
- PK 700 or PK 900 - STOP UNI - AKROFILL - STOP FILLER II - PERFECTFILLER GREY / WHITE / BLACK - PROFILLER GREY / WHITE / BLACK - R-M topcoat
Pretreatment
Degreasing PK 700 or PK 900
Sanding P80 / P150
Degreasing PK 700
Putty
Mixing ratio STOP UNI 100 g Hardener 3 g
Application Coats: 2 – 3
Drying 20°C 20 min. 60°C 10 min.
Infrared drying
(short wave) 4 min. at 50% (medium wave) 6 min.
Sanding Dry with P80, P150, P240, then degrease with PK 1000.
Vehicles damaged by hail B 1.1
Sealer
Mixing ratio AKROFILL 100 (vol.) 100 g D 501 25 (vol.) 17 g FR 500 25 (vol.) 15 g
Application Spraycoats: 1 Film thickness: 20 – 25 µm
Drying 60°C 20 min.
Infrared drying
(short wave) 11 min.
Spray filler
Mixing ratio STOP FILLER II 100 (vol.) 100 g STOP FILLER Hardener 5 (vol.) 3 g
Application Spraycoats: 3 – 5 Film thickness: 150 – 300 µm
Drying 20°C 3 – 4 hours 60°C 30 min.
Infrared drying
(short wave) 10 min. at 50% (medium wave) 15 – 20 min.
Sanding Dry with P150, P240, then degrease with PK 1000.
Prime sand through with EUROFILL or AM 850 PRIMEFILL
Vehicles damaged by hail B 1.1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 10/2012
Filler
Mixing ratio
PERFECTFILLER GREY 100 (vol.) 100 g D 70 / D 80 25 (vol.) 15 g FR 500 25 (vol.) 13 g You may use PROFILLER GREY / WHITE / BLACK or PERFECTFILLER WHITE / BLACK instead of PERFECTFILLER GREY.
Application Spraycoats: 2 3 Film thickness: 50 – 70 µm 80 – 120 µm
Drying 20°C 3 hours 60°C 20 min.
Infrared drying
(short wave) 9 min.
Sanding Dry-sand with P400, then degrease with PK 2000.
Topcoat
ONYX HD UNO HD CP
Apply in accordance with the Technical Data Sheet.
UNO HD CP Blending on one panel Blending with CHRONOLUX CP on the panel being repaired B 2
Process description
When repairing solid-colour paintwork, colour differences between the OEM finish and the chosen refinish solution can be avoided by means of tinting. However, blending in the colour within the panel being repaired is often a more efficient refinish solution.
Substrates
- R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Refinishes, fully cured and solvent-resistant
Products required
- UNO HD CP - CHRONOLUX CP - PK 700 and PK 2000 - MULTI SPOT
1) Preparation of the substrate
Degrease with PK 700 or PK 2000.
Dry-sand the filler surfaces with P400.
Dull the blending zone with a grey sanding pad. To prepare fade-out zone for CHRONOLUX CP application, polish it with FINE BRIL + moist, medium-hard sponge.
Degrease with PK 2000.
2) Applying UNO HD CP
Masking: Cover all adjacent surfaces with masking film.
Mix the UNO HD CP colour.
Mixing ratio: UNO HD CP 100 H 420 25 SC 820 25
Application: Apply 2 spraycoats to the repaired area, fading out around the filler patch.
Flash-off: Tack-free after 10 – 15 minutes.
UNO HD CP
Blending on one panel Blending with CHRONOLUX CP on the panel being repaired B 2
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 12/2012
3) Applying CHRONOLUX CP
Prepare CHRONOLUX CP.
Mixing ratio: CHRONOLUX CP 300 H 420 100 SC 850 100
Application: 1 thin + 1 wet coat
Flash-off: No flash-off between coats.
4) Melting in the fade-out area with MULTI SPOT
If there is no edge limiting the repair area, then you may fade out the clear coat on fairly narrow areas and melt in the fade-out zone using MULTI SPOT.
Mixing ratio: MULTI SPOT ready for use
Application: 2 or 3 spraycoats to the clear coat fade-out zone.
5) Drying
30 minutes at 60°C
If required, you may polish the blend-in area lightly with FINE BRIL after cooling.
UNO HD CP Blending on the adjacent panel Blending with CHRONOLUX CP B 2.1
Process description If the colour cannot be matched by means of blending within the panel being repaired, the most efficient repair solution may be to blend in on the adjacent panel. Blending in on the adjacent panel avoids tinting, which takes a lot of time and is therefore expensive.
Substrates
- R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Refinishes, fully cured and solvent-resistant
Products required
- UNO HD CP - CHRONOLUX CP - PK 700 and PK 2000
1) Preparation of the substrate
Degrease with PK 700 or PK 2000.
Dry-sand the filler surfaces with P400.
Dull the blending zone with a grey sanding pad. Degrease with PK 2000.
2) Applying UNO HD CP
Mixing ratio: Mix the UNO HD CP colour. UNO HD CP 100 H 420 25 SC 820 25
Application: 2 spraycoats, overlapping onto the adjacent panel(s).
Flash-off: 10 – 15 minutes until tack free
UNO HD CP Blending on the adjacent panel Blending with CHRONOLUX CP B 2.1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 12/2012
3) Applying CHRONOLUX CP
Mixing ratio: CHRONOLUX CP 300 H 420 100 SC 850 100
Application: 2 spraycoats, overlapping.
Drying: 30 minutes at 60°C
ONYX HD Colours for interiors B 3
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
Process description
Vehicle interiors (engine compartments and boots) often have mat or silky mat solid-colour finishes. There are ONYX HD mixing formulas for these colours on the colour information media, identified by this pictogram:
As an efficient repair solution, the process described below allows you to apply ONYX HD as a single-stage topcoat without any clear coat.
Substrates
- R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Electro-coated surfaces
Products required
- PK 1000 and PK 2000 - ONYX HD - ONYX INTERIOR
Pretreatment
Degreasing PK 1000
Sanding P400 Use a sanding pad on areas that are difficult to reach.
Degreasing PK 2000
Topcoat
Mixing ratio
Replace the volume of HYDROBASE HB 002 indicated in the ONYX HD formula with the same volume of ONYX INTERIOR. Any HB 100 contained in the mixing formula must be left out. Mixing formula with ONYX INTERIOR 100 (vol.) ONYX ACTIVATOR 5 (vol.) SC 820 / SC 850 60 (vol.)
Sprayguns HVLP gravity-feed spraygun 1.4 – 1.5 mm 0.7 bar at the nozzle
Application Spraycoats: 2 – 3 Film thickness: 20 – 25 µm
Flash-off 20°C 15 minutes
ONYX HD Blending process for three-coat systems B 3.1
Process description
This blending process allows to achieve almost invisible paintwork repairs. In the case of three- or four-coat systems, there must be a sufficiently large area on which to fade out. This is why blending in within one panel is not suitable. The process we recommend instead is blending in on the adjacent panel.
The colour of three-coat finishes depends on the thickness of the film applied in step 2. In order to find the matching colour, you should prepare spray-out samples with different numbers of spraycoats (two to four). These spray-out samples will clearly show how the film thickness applied in step 2 will actually influence the final colour.
Substrates
- R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Refinishes, fully cured and solvent-resistant
Products required
- ONYX HD precoat / see step 1 of the mixing formula - ONYX HD basecoat / see step 2 of the mixing formula
- Selected clear
1) Preparation of the substrate
Degrease with PK 2000.
Dry-sand filler patch with P400.
Sand the adjacent panel with P1000. Degrease with PK 2000.
2) Applying the precoat (step 1)
Masking: Cover the adjacent panel with masking film.
Solid colour Special effect basecoat Mixing ratio: ONYX HD 100 100 ONYX ACTIVATOR 5 / HYDROMIX 80 60 Stir thoroughly after adding each of the components.
Spraying pressure: 2 bar
Application: Apply two spraycoats to the panel being repaired.
ONYX HD Blending process for three-coat systems B 3.1
2.1) Applying the precoat (step 1)
Masking: Remove the masking film from the adjacent panel.
Spraying pressure: 1.5 bar
Application: 1 spraycoat Blend in the transition between the panel being repaired and the adjacent panel.
Flash-off: Flash off until mat.
Cleaning: Use a tack rag to remove overspray.
3) Applying the basecoat (step 2)
Mixing ratio: ONYX HD 100 HYDROMIX 60
Stir thoroughly after adding each of the components.
Spraying pressure: 1.5 bar
Application: 1 spraycoat Blend in the transition between the panel being repaired and the adjacent panel.
Flash-off: Flash off until mat.
Cleaning: Use a tack rag to remove overspray.
3.1) Applying the basecoat (step 2)
Application: 2 spraycoats For each new spraycoat, reduce the pressure to 1.5 bar and blend in along the fade-out areas of the previous coat. Then increase the spraying pressure to 2 bar and spray the entire repair panel.
Flash-off: Flash off until mat after each spraycoat.
Cleaning: Use a tack rag to remove overspray.
ONYX HD Blending process for three-coat systems B 3.1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
4) Applying the clear
Mix, apply and dry the selected R-M clear according to the instructions of the relevant Technical Data Sheet.
5) Drying the repair area
Dry the repair area according to the instructions of the Technical Data Sheet for the clear applied.
ONYX HD Blending process for four-coat systems B 3.2
Process description This blending process allows to achieve almost invisible paintwork repairs. In the case of three- or four-coat systems, there must be a sufficiently large area on which to fade out. This is why blending in within one panel is not suitable. The process we recommend instead is blending in on the adjacent panel.
The colour of four-coat finishes depends on the thickness of the film applied in step 3. In order to find the matching colour, you should prepare spray-out samples with different numbers of spraycoats (two to four). These spray-out samples will clearly show how the film thickness applied in step 3 will actually influence the final colour.
Substrates
- R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Refinishes, fully cured and solvent-resistant
Products required
- ONYX HD precoat / see step 1 of the mixing formula - ONYX HD basecoat / see step 2 of the mixing formula - ONYX HD basecoat / see step 3 of the mixing formula
- Selected clear
1) Preparation of the substrate
Degrease with PK 2000.
Dry-sand filler patch with P400.
Sand the adjacent panel with P1000. Degrease with PK 2000.
2) Applying the precoat (step 1)
Masking: Cover the adjacent panel with masking film.
Mixing ratio: ONYX HD 100 ONYX ACTIVATOR 5 HYDROMIX 80
Stir thoroughly after adding each of the components.
Spraying pressure: 2 bar
Application: Apply one or two spraycoats to the panel being repaired.
ONYX HD Blending process for four-coat systems B 3.2
2.1) Applying the precoat (step 1)
Masking: Remove the masking film from the adjacent panel.
Spraying pressure: 1.5 bar
Application: 1 spraycoat Blend in the transition between the panel being repaired and the adjacent panel.
Flash-off: Flash off until mat.
Cleaning: Use a tack rag to remove overspray.
3) Applying the basecoat (step 2)
Solid colour Special effect basecoat Mixing ratio: ONYX HD 100 100 ONYX ACTIVATOR 5 / HYDROMIX 80 60
Stir thoroughly after adding each of the components. Spraying pressure: 1.5 bar Application: 1 spraycoat Blend in the transition between the panel being repaired
and the adjacent panel. Flash-off: Flash off until mat.
Cleaning: Use a tack rag to remove overspray.
3.1) Applying the basecoat (step 2)
Application: 2 spraycoats When starting a new spraycoat, reduce the pressure to 1.5 bar and blend in along the fade-out areas of the previous coat. Then increase the spraying pressure to 2 bar and spray the entire repair panel.
Flash-off: Flash off until mat after each spraycoat.
Cleaning: Use a tack rag to remove overspray.
ONYX HD Blending process for four-coat systems B 3.2
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
4) Applying the basecoat (step 3)
Mixing ratio: ONYX HD 100 HYDROMIX 60 Application: 2 to 4 spraycoats (depending on the desired colour)
When starting a new spraycoat, reduce the pressure to 1.5 bar and blend in along the fade-out areas of the previous coat.
Then increase the spraying pressure to 2 bar and spray the entire repair panel.
Flash-off: Flash off until mat after each spraycoat. After the final spraycoat, allow an extra 10 minutes flash-off period.
5) Applying the clear
Prepare and apply the selected R-M clear according to the instructions of the relevant Technical Data Sheet.
Apply 2 spraycoats over the entire surface repaired.
6) Drying the repair area
Dry the repair area according to the instructions of the Technical Data Sheet for the clear applied.
HYDROCLEAN Treatment of waste water containing ONYX HD B 4
Process description
Tools (such as sprayguns, cans, filters, etc.) that were used for processing ONYX HD or HYDROFILLER II can be cleaned easily with tap water.
However, the law does not allow you to discharge directly into the public sewage system water that has been used to clean tools soiled with ONYX HD or HYDROFILLER II.
HYDROPURE coagulating powder and the automatic HYDROCLEAN filter system ensure efficient treatment of waste water and allow the waste water, once treated, to be disposed of into the public sewage system. This will considerably reduce the waste volume to be disposed of.
Analyses by independent institutes carried out on our behalf show that, on principle, discharging waste water that has been treated with HYDROPURE and HYDROCLEAN poses no problems.
But you will need to contact your national, regional or local authorities in order to correctly assess the individual waste water situation in your bodyshop. The requirements, constraints and standards may vary considerably.
After applying ONYX HD, pour the paint residue remaining in the spraygun into a vessel specifically labelled to hold “paint waste”, which must be disposed of as industrial special waste. The empty sprayguns and any other tools used can then be cleaned easily with tap water. Collect the water to be treated separately and clean it by coagulation.
Products required
- HYDROPURE
1) Addition of HYDROPURE
Add 0.1% of HYDROPURE to the waste water you need to treat, e.g. 100 g for a vessel holding 100 litres of waste water.
2) Coagulation
Scatter HYDROPURE into the waste water and stir the water for two or three minutes to start the coagulation process.
HYDROCLEAN Treatment of waste water containing ONYX HD B 4
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 05/2012
3) Filtering
Separate the solids from the water by filtering with the recommended filters. The water treated in this way may then be transferred to the public sewage system.
4) Waste disposal
When the filter is full, tie it up and dispose of it as industrial special waste.
Polishing guide B 5
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
Process description
Guide to the different paintwork finishing operations in the bodyshop.
Substrates
- Automotive OEM finishes, fully cured and solvent-resistant - Refinishes, fully cured and solvent-resistant
Products required
- FINE BRIL - BRIL 852
SMALL DEFECTS, DUST and DIRT INCLUSIONS
P2000 wet
FINE BRIL
any standard silicone-free deep-gloss sealing polish
LARGE SURFACES, ORANGE PEEL, SCRATCHES FROM CAR-WASH BRUSHES, PAINT RUNS
P1000 dry or
P1200 wet
BRIL 852
any standard silicone-free deep-gloss sealing polish
FINE POLISHING, REMOVING OF OVERSPRAY IN BLEND-IN REPAIRS, FRESH REFINISHES
FINE BRIL
any standard silicone-free deep-gloss sealing polish
Matt Shade concept B 6
Application R-M Matt Shade Concept was designed to achieve equal mat surfaces on ONYX HD basecoat with the clears SILICATOP und SATINTOP. With the mixture of both mat clears gloss levels of 12 up to 65 units at an angle of 60 could be achieved.
Background:
The gloss level of the OEM and repair finishes may occasionally vary on one and the same car. This may lead to additional work in the refinishing process.
Possible reasons: Gloss level deviations or variations within the original coating (original mat finishes applied at the carmakers'
production lines, for example, show gloss level differences between vertically and horizontally coated panels) Carmakers use different paint products with different gloss levels In the refinishing process, insufficient flash-off times after the spraycoats and too high or too low film builds may
lead to different gloss levels of the mat clearcoat. Other reasons may be that the recommended basecoat film build was not respected or that the spraycoats applied did not overlap correctly.
Measures: In order to avoid the above described different gloss levels, R-M recommends to respect the specified basecoat
and clearcoat film builds and to flash off the clearcoat sufficiently after each spraycoat, i.e. until the surface is completely mat (flash off for approx. 15 minutes after the first clear spraycoat and for approx. 20 minutes after the second.
R-M recommends the R-M Matt Shade concept swatch to determine the gloss level of the vehicle to be repaired. These specifications refer to finishes for solid-colour and metallic basecoats. Light and pure silver colours can
increase the gloss level. Therefore, we recommend producing a spray-out sample before each refinishing job. SILICATOP and SATINTOP can be used without FLEX Additive for plastic parts! Mat surfaces cannot be polished in order to remove dust inclusions. Matt clears cannot be faded out. Therefore application of whole panel is necessary.
Additional Information:
It is imperative to avoid: Polishing or sanding of clearcoat surface Usage of wax or polish Usage of "scratching" sponges (e.g. household sponge, rag, etc.) Usage of any aggressive agents (cleaner, oil, fat, etc.)
Cleaning instruction: do not use car wash sides never wash a car with mat clear in direct sunlight Not adherent particles (dust, leaves, etc.) should be removed with compressed air before washing the car Soak any remaining dead insects, bird droppings etc. with plenty of water and remove them with a high-pressure
cleaner. The vehicle should preferably be washed by hand, using a soft sponge, a neutral cleaning agent and plenty of
water. The washed car should be preferably dried with compressed air or by wiping with a soft leather rag
Substrates R-M fillers (R-M PREP’ART System) Automotive OEM finishes, fully cured and solvent-resistant Refinishes, fully cured and solvent-resistant
Products required PK 2000 ONYX HD or DIAMONT SATINTOP / SILICATOP / CRYSTALCLEAR CP or STARTOP HS H 420 or H9000 SC 850
Matt Shade concept B 6
Pre-treatment
Cleaning PK 2000
Applying the basecoat
Mixing ratio
Stir the ONYX HD mixing bases on the mixing machine twice a day for 15 minutes. ONYX HD mixing bases 100 (vol.) depending on colour HYDROMIX 60 (vol.) 60 g Mix intensively immediately after weighing. Strain before application. Attention: Do not insert a screen in the spraygun when applying a metallic or pearl-effect basecoat. When usingHB004 slow in the mixing formula, HYDROMIX slow must also be used.
Spray viscosity Potlife
42 to 68 seconds ISO 4 cup at 20°C ONYX HD colours mixed to formula: 6 months in a sealed plastic vessel. ONYX HD ready for use: 1 week in a sealed plastic vessel.
Spray viscosity HVLP gravity-feed spraygun 1.4 – 1.5 0.7 bar at the nozzle
Application
Spraycoats: Film thickness:
Solid colours 2 – 3 20 – 25 µm
Metallic or pearl-effect colours 1 or 2 + 1 coat to match the effect 12 – 15 µm
Flash off until mat after each spraycoat.
Drying at 20°C: approx. 15 min. Possibility to speed up the process with additional air flow at 60°C: approx. 10 min. + cooling
Matt shade concept B 6
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Applying the clear
Mixing ratio
Mixing ratio of R-M clears to achieve a gloss level of 12 – 65 units when using hardener H 9000:
Mixing ratio (%) Gloss level +/- 2 at an angle of 60°
20 25 30 40 53 65 SILICATOP 100 80 60 30 / / SATINTOP / 20 40 70 100 75 STARTOP HS / / / / / 25 Stir well before use. Clear coat mixture H 9000 SC 850
100 Vol. 25 Vol. 25 Vol.
100 g 27 g 22 g
Mix well and strain before application when using hardener H 420:
Mixing ratio (%) Gloss level +/- 2 at an angle of 60°
12 20 25 30 40 53 65
SILICATOP 100 60 40 20 / / / SATINTOP / 40 60 80 100 90 80 CRYSTALCLEAR CP / / / / / 10 20 Stir well before use. Clear coat mixture 100 g H 420 23 g SC 850 36 g Mix well and strain before application
Sprayguns HVLP gravity-feed spraygun Compliant gravity-feed spraygun
1.3 – 1.5 1.3 – 1.4
0.7 bar at the nozzle 2.0 – 2.5 bar
Application
Spraycoats: 2 Film thickness: 40 – 50 µm Flash off until mat between spraycoats and before stoving. After the first spraycoat, allow to flash off for at least 10 min, after the second spraycoat for at least 15 min.
Drying at 60°C: 30 min.
Finishing operations and maintenance of matt clearcoat surfaces B 6.1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Process description
As part of its designo programme, Mercedes-Benz offers its customers individualised, top-quality items of trim or finish such as high-grade wood varieties or finest leather for the vehicle interior and fascinating, exclusive exterior colours. Mercedes-Benz extended its designo programme to include a matt clearcoat that gives the vehicles a special visual touch.
CLS Grand Edition with special “designo magno platin” matt finish Here, the matt finish is not only an eye-catcher. It also stands out on account of its good scratch resistance and dirt repellent properties.
Pretreatment of OEM finishes
No special measures are necessary as regards abrasives and sanding processes.
Refinish paintwork
The automotive refinish paint system is applied in the familiar manner except for the type of matt clear to be used (e.g. see chapter <F> for SILICATOP application details).
Finishing operations (refinish paintwork)
As defects visible on the surface of the clearcoat, such as dust inclusions, runs, etc., can no longer be removed so as to render them invisible, great care is to be taken when applying the paint materials and meticulous cleanliness is to be observed. Polishing is not possible, as this produces changes in the gloss level!
Care of the paintwork
What you must absolutely NOT do is:
� polish the clearcoat surface � use waxes or polishes � use "scratching" sponges (e.g. household sponges, rags, etc.) � use a car wash � use any aggressive agents (cleaners, oils, fats, etc.)
Cleaning
Never wash the car in direct sunlight. � Before washing, remove loose "dirt" (dust, leaves, etc.) with compressed air. � Soak any remaining dead insects, bird droppings etc. with plenty of water and remove them with a high-pressure cleaner. � The vehicle should preferably be washed by hand, using a soft sponge, a neutral cleaning agent and plenty of water. � Preferably blow the car dry with compressed air or wipe it dry with a soft leather cloth.
“Scratch-resistant clearcoats”: Pre-treatment and finishing operations B 7
Process description
For most Mercedes Benz vehicles highly scratch-resistant clears are used in the production line coating process. The type label of the associated vehicles has a "C" in front of the paint code. Accordingly, for repairs, suitable more scratch-resistant clearcoat systems should also be used and the processes described below should be followed.
Pre-treatment of the original paintwork (as recommended by the supplier)
Sanding of the original paintwork
Depending on the hardness of the paintwork sand the surface with a random orbital sander (orbit diameter: 3 - 5 mm) and 3MTM HookitTM 255P Gold with P320 – P500 grit (or: 3MTM HookitTM Purple Premium).
Pre-treatment of the blend-in
surfaces
Sand the surface with a random orbital sander (orbit diameter: 3 – 5 mm) and 3MTM HookitTM 260L with P800 – P1200 grit. Finish-sand corners and edges using 3MTM Soft Pad ultrafine.
If the above procedure has been followed correctly, the surface treated will have a uniform mat appearance, and sanding marks will be clearly visible.
SUPREMELUX CP finishing operations
Sanding/removing
Runs: Wet sand runs with a sanding block and P 800 sanding paper to produce an even surface. Then sand the surface with a random orbital sander (orbit diameter: 3 - 5 mm) and 3MTM Hook-itTM 260L (grit size: P 1500). Textured surface (orange peel): Sand the surface with a random orbital sander (orbit diameter: 3 - 5 mm) and 3MTM Hook-itTM 260L (grit size: P 1500). Remove dirt or dust inclusions with the red side of an E50199 Finesse-itTM sanding block and abrasive discs # 00127 (9 µ) or 00128 2000A.
To reduce polishing times for all three types of paintwork defects finish sand the sanded surfaces with TrizactTM 50075 or 50076 fine finishing discs for 75 mm or 150 mm random orbital sanders. (For rather small paintwork defects you may also use TrizactTM 50079 abrasive discs fitted to the soft side of the Finesse-itTM sanding block).
“Scratch-resistant clearcoats”: Pre-treatment and finishing operations B 7
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Polishing
Polish the sanded areas at low speed using a 01927 lambswool pad and 3MTM
09374 Perfect-itTM sanding paste. Do not apply too much pressure to the machine. After having sanded the surface for approx. 15 seconds slightly increase the speed and further reduce the pressure on the machine (to the point where the machine is moved over the surface carrying only its own weight).
Quality check
Once the polished surface has cooled down, apply finish control spray and remove it again instantly from the surface. If the repaired areas can no longer be distinguished from the original paintwork, continue with the fine polishing operations. If the repaired area is still visible, repeat the operations specified in the “Polishing” section.
Fine polishing
The 09550 orange Compounding Pad and 09375 Fine Sanding Paste (or Perfect it III Extra Fine Sanding Paste for scratch-resistant finishes) should be used at this stage to restore the original deep gloss of the finish. At low speed and exerting little pressure, buff all the areas previously polished with the sheepskin pad.
Thanks to the properties of the clear used, the result of these last two working steps will be of such good quality that no further buffing of the surface with 09376 Machine Polish will be necessary. It is of course possible to complete repair jobs with this working step when critical colours such as black or dark mica colours are involved.
For additional protection, the surfaces treated can be sealed with 09377 Finishing Glaze.
Refinishing processes with MB 0047 Designo Titanium Alubeam Metallic B 8
Process description
Specific repair system for the repair of MB 0047 Designo Titanium Alubeam Metallic
Substrates
- R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Refinishes, fully cured and solvent-resistant
Products required
- PK 2000 - ONYX HD HB 100 - ONYX HD MB 0047 - CRYSTALCLEAR CP
Pre-treatment
Cleaning PK 2000
Sanding P 500 / P 1500 Sand very carefully; use only recommended grit sizes
Cleaning PK 2000
Application of HB 100
Mixing ratio ONYX HD HB 100 100 HYDROMIX 60
Sprayguns HVLP gravity-feed spraygun 1.5 0.7 bar at the nozzle
Application Number of spraycoats: 1 Film thickness: approx. 10 µm
Flash-off time 20°C flash off until mat
Refinishing processes with MB 0047 Designo Titanium Alubeam Metallic B 8
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Application of ONYX HD MB 0047
Mixing ratio ONYX HD MB 0047 100 (vol.) HYDROMIX 60 (vol.)
Sprayguns HVLP gravity-feed spraygun 1.5 mm 0.7 bar at the nozzle
Application Number of spraycoats: 2 + 2 coats to match the effect Film thickness: 10 - 15 µm
Flash-off time 20°C Flash off until mat between the coats.
Application of clear
Mixing ratio CRYSTALCLEAR CP 300 (vol.) H420 100 (vol.) SC 850, SC 820 or SC 880 100 (vol.)
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle
Application Number of spraycoats: 2 Film thickness: 40 - 60 µm
Drying 60°C 30 min.
Refinishing process Blending process with MB 0047 Designo Titanium Alubeam Metallic B 8.1
Process description
Specific repair system for the repair of MB 0047 Designo Titanium Alubeam Metallic.
Blending in within the panel being repaired does not produce a satisfying result. It is always necessary to blend in on the adjacent panel.
Substrates
- R-M fillers - Automotive OEM finishes, fully cured and solvent-resistant - Refinishes, fully cured and solvent-resistant
Products required
- ONYX HD HB 100 - ONYX HD MB 0047 - Selected clear
1) Preparation of the substrate
Degrease with PK 2000.
Dry-sand filler patch with P500. Then sand with P1500.
Sand the adjacent panel with P1500. Degrease with PK 2000.
2) Applying ONYX HD HB 100
Masking: Cover the adjacent panel with masking film.
Mixing ratio: ONYX HD HB 100 100
HYDROMIX 60
Pressure: 2 bar
Application: Apply the first spraycoat to the panel being repaired.
Flash-off: Flash off until mat.
3) First spraycoat of ONYX HD MB 0047
Masking: Cover the adjacent panel with masking film.
Mixing ratio: ONYX HD MB 0047 100 HYDROMIX 60
Stir thoroughly after adding each of the components.
Pressure: 2 bar
Application: 1 spraycoat
Flash-off: Flash off until mat.
Refinishing process Blending process with MB 0047 Designo Titanium Alubeam Metallic B 8.1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
4) Applying ONYX HD HB 100
Masking: Remove the masking film from the adjacent panel.
Mixing ratio: ONYX HD HB 100 100
HYDROMIX 60
Spraygun: 1.5 mm HVLP
Pressure: 2.0 bar
Application: Spray 1 wet coat on the adjacent panel.
Flash-off: Not necessary
5) Second spraycoat of ONYX HD MB 0047
Application: 1 spraycoat Reduce the pressure to 1.5 bar and blend in along the fade-out areas of the previous coat. Then increase the spraying pressure to 2 bar and spray the entire repair panel.
Flash-off: Flash off until mat.
5.1) Harmonising coats of ONYX HD MB 0047
Application: 2 harmonising coats For each new spraycoat, reduce the pressure to 0.8 - 1.3 bar and blend in along the fade-out areas of the previous coat. Then increase the spraying pressure to 2 bar and spray the entire repair panel.
Flash-off: Flash off until mat after each spraycoat.
6) Applying the clear
Mix, apply and dry the selected R-M clear according to the instructions of the relevant Technical Data Sheet.
7) Drying the repair area
Dry the repair area according to the instructions of the Technical Data Sheet for the clear applied.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
PK 700 / PK 900 Cleaning agents C 1 Product description Cleaners for use on surfaces which will be refinished. PK 700 is particularly suitable for the first cleaning step to remove tar, grease and silicones from vehicles which will be refinished. The product can also be used for the initial cleaning of composite plastics. PK 900 is particularly suitable for cleaning bare metal surfaces as well as OEM finishes which will be repaired using TRANSPARENT SEALER CP. PK 700: 2004/42/IIB (aI)(850)840: The EU limit value for this product (product category: IIB.aI) in ready-for-use form is max 850 grams of VOC per litre. The VOC content of this product is 840 g/l. PK 900: 2004/42/IIB (aI)(850)840: The EU limit value for this product (product category: IIB.aI) in ready-for-use form is max 850 grams of VOC per litre. The VOC content of this product is 840 g/l.
Technical characteristics Shelf life: 36 months Density PK 700: 0.765 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Density PK 900: 0.779 g/cm³ Colour: transparent Solids content: 0.0 % by weight
Pre-treatment Do not use the cleaners on solvent-sensitive or thermoplastic substrates.
Mixing ratio PK 700 and PK 900 are ready for use.
Application
Soak a clean and dry lint-free cloth with PK 700 or PK 900.
Clean small areas of approx. 0.5 m² of the surface to be painted and wipe these areas immediately afterwards with a dry cloth of the same quality.
PK 700 and PK 900 should not dry on the surface being treated. Attention: Individual paint coats may suffer surface etching from the use of PK 700 or PK 900. In this case, ensure a good flash-off of the substrate before going on with the repair so that no solvents will be trapped in the new paint system. In extreme cases, remove the affected paint coats before applying the new paint system.
Further treatment As specified in the R-M refinishing processes.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
PK 1000 / PK 2000 Degreasing and cleaning agents with low solvent content C 1 Product description PK 1000 is particularly well suited for removing grease, oil and silicone and for the pre-treatment of plastic surfaces. PK 2000 is intended for cleaning operations prior to the application of HYDROFILLER II or ONYX HD. PK 1000: 2004/42/IIB (aII)(200)186: The EU limit value for this product (product category: IIB.aII) in ready-for-use form is max 200 grams of VOC per litre. The VOC content of this product is 186 g/l. PK 2000: 2004/42/IIB (aII)(200)198: The EU limit value for this product (product category: IIB.aII) in ready-for-use form is max 200 grams of VOC per litre. The VOC content of this product is 198 g/l.
Technical characteristics Shelf life: 60 months Density: 0.98 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: yellow (PK 1000) Solids content: 1.0% by weight Shelf life: 60 months Density: 0.976 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: transparent (PK 2000) Solids content: 0.0% by weight
Pre-treatment Use PK 1000 and PK 2000 before and after sanding.
Mixing ratio PK 1000 and PK 2000 are ready for use.
Application
Soak a clean and dry lint-free cloth with PK 1000 or PK 2000.
Clean small areas of approx. 0.5 m² of the surface to be painted and wipe these areas immediately afterwards with a dry cloth of the same quality.
PK 1000 and PK 2000 should not dry on the surface being treated.
Attention:
Some 1K primers may suffer surface etching from the use of PK 1000. In this case, ensure a good flash-off so that no solvents will be trapped in the new paint system. In extreme cases, remove the 1K primer coat before applying the new paint system.
Further treatment Continue with the next step of the repair process.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
STOP FILLER II Polyester spray filler C 2.1 Product description Polyester filler to be applied with a gravity-feed spray gun. Particularly suitable for repairing large areas. Especially hail-damaged paintwork can be repaired efficiently with STOP FILLER II. 2004/42/IIB(b)(250)249: The EU limit value for this product (product category: IIB.b) in ready-for-use form is max 250 grams of VOC per litre. The VOC content of this product is 249 g/l.
Technical characteristics Shelf life: 8 months Density: 1.480 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: grey Solids content: 70.5% by weight
Pre-treatment: Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel, glass-fibre reinforced plastics (GRP, SMC) and well-cured solvent-resistant old paintwork with P240). Clean with PK 1000. Bare metal surfaces (steel, aluminium, galvanised substrates) must previously be primed with one coat of AKROFILL and dried at 60°C for 20 min.
Mixing ratio Stir well before use. STOP FILLER II 100 (vol.) 100 g STOP FILLER-Hardener 5 (vol.) 3 g
Potlife 25 – 30 minutes at 20°C
Sprayguns HVLP gravity-feed spraygun 2.5 – 3.0 0.7 bar at the nozzle Compliant gravity-feed spraygun 2.5 2.0 – 3 bar
Application
Number of spraycoats: 3 – 5 Film thickness: 150 µm – 300 µm If a film thickness of > 300 µm is required, a second spray body filler layer can be applied without intermediate sanding after having dried the first layer
Drying Drying at 20°C: 3 – 4 hours Drying at 60°C: 30 min.
Infrared drying (short wave) 10 min. at 50% (medium wave) 15 – 20 min.
Sanding P150 pre-sanding P240 fine sanding
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 11/2009
STOP FLEX Polyester putty for plastics C 2.1 Product description Flexible polyester putty for repairing plastic parts. STOP FLEX allows small scratches or pores in the substrate to be levelled out, for example after repair with a repair kit. 2004/42/IIB(b)(250)180: The EU limit value for this product (product category: IIB.b) in ready-for-use form is max 250
grams of VOC per litre. The VOC content of this product is 180 g/l. Technical characteristics Shelf life: 12 months Density: 1.830 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: grey Solids content: 86.9% by weight
Pre-treatment: Clean with PK 700 or PK 1000. Sand with P80 or P150. Clean with PK 1000. STOP FLEX can be applied to all paintable plastic substrates normally used in the automotive industry. The product is not suitable for use on unpaintable pure polypropylene (PP) and polyethylene (PE).
Mixing ratio
Stir well before use. < 12°C 12 – 25°C > 25°C STOP FLEX 100 g 100 g 100 g Hardener 3 g 2.5 g 1.5 g Mix intensively to avoid any marble effect. Respect the mixing ratio. Using too much hardener can lead to topcoat discoloration (peroxide spots) while using too little hardener can increase the drying time.
Potlife 5 minutes at 20°C
Application Number of coats: 1 - 2 Film thickness: 1 – 2 mm maximum
Drying Drying at 20°C: 25 – 35 min. Drying at 60°C: 15 min.
Infrared drying (short wave) 8 min. at 50% (medium wave) 10 min.
Sanding Dry with P80, P150, P240, P320
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 11/2009
STOP MULTI Multi-purpose putty C 2.1 Product description Multi-purpose polyester putty suitable for repairing steel, galvanised steel, aluminium and glass-fibre reinforced plastics (GRP, SMC). 2004/42/IIB(b)(250)180: The EU limit value for this product (product category: IIB.b) in ready-for-use form is max 250
grams of VOC per litre. The VOC content of this product is 180 g/l. Technical characteristics Shelf life: 12 months Density: 1.763 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: white Solids content: 85.6% by weight
Pre-treatment: Clean with PK 700 or PK 900. Sand (steel and galvanised steel with P80, aluminium with P150-P180). Clean with PK 1000. Do not use the product on phosphating primers or thermoplastic substrates.
Mixing ratio
Stir well before use.
< 12°C 12 – 25°C > 25°C
STOP MULTI 100 g 100 g 100 g
Hardener 3 g 2.5 g 1.5 g Mix intensively to avoid any marble effect. Respect the mixing ratio. Using too much hardener can lead to topcoat discoloration (peroxide spots) while using too little hardener can increase the drying time.
Potlife 5 minutes at 20°C
Application Number of coats: 2 - 3
Drying Drying at 20°C: 20 min. Drying at 60°C: 10 min. Drying will take longer when product is applied to a cold substrate.
Infrared drying (short wave) 4 min. at 50% (medium wave) 6 min.
Sanding Dry with P80, P150, P240
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 11/2009
STOP UNI Multi-purpose polyester putty C 2.1 Product description Multi-purpose polyester putty which can be applied to all substrates normally used in the automotive industry: electrocoat primers, galvanised steel, automobile body sheet, aluminium, glass-fibre reinforced plastics (GRP, SMC). 2004/42/IIB(b)(250)180: The EU limit value for this product (product category: IIB.b) in ready-for-use form is max 250
grams of VOC per litre. The VOC content of this product is 180 g/l. Technical characteristics Shelf life: 12 months Density: 1.660 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: white Solids content: 84.6% by weight
Pre-treatment: Clean with PK 700 or PK 900. Sand (steel and galvanised steel with P80, aluminium with P150-P180). Clean with PK 1000. Do not use the product on phosphating primers or thermoplastic substrates.
Mixing ratio
Stir well before use.
< 12°C 12 – 25°C > 25°C
STOP UNI 100 g 100 g 100 g
Hardener 3 g 2.5 g 1.5 g Mix intensively to avoid any marble effect. Respect the mixing ratio. Using too much hardener can lead to topcoat discoloration (peroxide spots) while using too little hardener can increase the drying time.
Potlife 5 minutes at 20°C
Application Number of coats: 2 - 3 Film thickness: 2 – 3 mm max.
Drying Drying at 20°C: 20 min. Drying at 60°C: 10 min.
Infrared drying (short wave) 4 min. at 50% (medium wave) 6 min.
Sanding Dry with P80, P150, P240
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2011
EUROFILL Chromate-free wash primer C 2.2 Product description Chromate-free wash primer for use as anti-corrosion primer on bare metal surfaces (aluminium, galvanised steel and automobile body sheet). Next coat must be an R-M PU filler. 2004/42/IIB(cIII)(780)760: The EU limit value for this product (product category: IIB.cIII) in ready-for-use form is max
780 grams of VOC per litre. The VOC content of this product is 760 g/l. Technical characteristics Shelf life: 24 months Density: 1.126 g/cm³ Theoretical spreading rate: 115 m²/l at 1 µm Colour: beige Solids content: 43.3% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel with P240). Clean with PK 1000.
Mixing ratio
Stir well before use. EUROFILL 100 (vol.) 100 g EUROFILL CATALYST 100 (vol.) 74 g Mix well and strain before application.
Spray viscosity Potlife
20 to 30 seconds ISO 4 cup at 20°C 48 hours at 20°C in a sealed plastic or glass container
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.7 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.6 2.0 - 2.5 bar
Application Number of spraycoats: 2 Film thickness: 10 – 15 µm Note: EUROFILL can also be applied with a brush.
Flash off Drying at 20°C: 10 - 15 minutes
Further treatment After the specified flash-off time, apply R-M 2K PU filler wet on wet. When the flash-off time exceeds 2 hours at 20°C, de-nib the surface to which PU filler will be applied.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
AKROFILL 2K SF Primer C 2.2 Product description 2-component primer for direct use on metal substrates (steel, aluminium, galvanised steel as per quality standard of the automotive industry) under STOP FILLER II 2004/42/IIB(cI)(540)520 The EU limit value for this product (product category: IIB.cI) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 520 g/l. Technical characteristics Shelf life: 12 months Density: 1.48 g/cm³ Theoretical spreading rate: 400 m²/l at 1 µm Colour: grey Solids content: 70.0 % by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and old paintwork with P240). Clean with PK 1000.
Mixing ratio
Stir thoroughly before use. AKROFILL 100 (vol.) 100 g D 501 25 (vol.) 17 g FR 500 25 (vol.) 15 g
Spray viscosity Potlife
42 to 58 seconds ISO 4 cup at 20°C 3.5 hours in a sealed container
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle Compliant gravity-feed gun 1.6 – 1.8 2.0 bar
Application Spraycoats: 1 Film thickness: 20 – 25 µm
Drying Drying at 60°C: 20 min.
Infrared drying (short wave) 11 min.
Further treatment After cool down further treatment with STOP FILLER II within one working day
EUROXY CP Chromate-free epoxy primer filler C 2.3 Product description 2-component epoxy primer filler with anti-corrosive properties for direct use on metal substrates (steel, aluminium, galvanised steel as per quality standard of the automotive industry). EUROXY CP can also be used as a primer or as wet-on-wet primer filler. 2004/42/IIB(cI)(540)459: The EU limit value for this product (product category: IIB.cI) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 459 g/l. Technical characteristics Shelf life: 36 months Density: 1.567 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: light grey Solids content: 78.3% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and old paintwork with P240). Clean with PK 1000.
Mixing ratio
Stir well before use. EUROXY CP 100 (vol.) 100 g EUROXY CP Reactive 25 (vol.) 16 g FR 500 25 (vol.) 15 g Ideal application conditions for two-component EPOXY products: 20°C and a relative air humidity below 80%. Application not possible in temperatures below 15°C.
Spray viscosity Potlife
40 to 50 seconds ISO 4 cup at 20°C 8 hours in a sealed container
Sprayguns
HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.6 – 1.8 2.0 bar
Application
Primer filler (sanding) Number of spraycoats: 2 Film thickness: 40 – 50 µm
Drying Drying at 20°C: 8 hours
Drying at 60°C: 30 min.
Infrared drying (short wave) 11 min. (medium wave) 10 – 15 min.
Further treatment Primer filler sanding: dry with P400.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
EUROXY CP Chromate-free epoxy primer filler / Epoxy Wet-on-wet primer filler C 2.3 Product description 2-component epoxy primer filler / wet-on-wet primer filler with anti-corrosive properties for direct use on metal substrates (steel, aluminium, galvanised steel as per quality standard of the automotive industry) 2004/42/IIB(cI)(540)459: The EU limit value for this product (product category: IIB.cI) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 459 g/l. Technical characteristics Shelf life: 36 months Density: 1.567 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: light grey Solids content: 78.3% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and old paintwork with P240). Clean with PK 1000.
Mixing ratio
Stir well before use. EUROXY CP 100 (vol.) 100 g EUROXY CP Reactive 25 (vol.) 16 g FR 500 25 (vol.) 15 g Ideal application conditions for two-component EPOXY products: 20°C and a relative air humidity below 80%. Application not possible in temperatures below 15°C.
Spray viscosity Potlife
40 to 50 seconds ISO 4 cup at 20°C 8 hours in a sealed container
Sprayguns
HVLP gravity-feed spraygun 1.3 – 1.9 1,3 (2.0 bar, 0.7 bar at the nozzle) Compliant gravity-feed spraygun 1.3 – 1.8 1.3 – 1.4
Application
Primer Wet-on-wet primer filler Number of spraycoats: 1 thin 1 – 2 Film thickness: 15 – 20 µm 30 – 40 µm
Drying
Drying at 20°C: 15 min. 20 min. Drying at 60°C: 20 min. /
Infrared drying (short wave) 11 min. / (medium wave) 10 – 15 min. /
Further treatment Primer: wet-on-wet application of R-M 2K primer filler Wet-on-wet primer filler: wet-on-wet application of R-M topcoat Intermediate sanding is required when flash-off time exceeds 10 hours at 20°C.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
HYDROFILLER II Water-soluble filler C 2.3 Product description Water-borne and therefore low-solvent one-component filler suitable for dry sanding. Particularly suitable for repairing cosmetic damage because the filler coat can be lightly sanded and overcoated with R-M topcoat after a short flash-off. 2004/42/IIB(cI)(540)180: The EU limit value for this product (product category: IIB.cI) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 180 g/l. Technical characteristics Shelf life: 12 months Density: 1.280 g/cm³ Theoretical spreading rate: 366 m²/l at 1 µm Colour: dark grey Solids content: 51% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and old paintwork with P240). Clean with PK 1000. Bare aluminium areas and rather large galvanised steel and body steel areas must be primed with EUROXY CP before filler application.
Mixing ratio Stir well before use. + 10% HYDROMIX
Spray viscosity Potlife
72 to 108 seconds ISO 4 cup at 20°C 7 days
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.6 – 1.8 2.0 bar
Application
Sanding filler Cosmetic repairs Number of spraycoats: 2 2 or 3 Film thickness: 40 – 60 µm 30 – 40 µm Flash off until mat between spraycoats
Drying Drying at 20°C: 2h; temperature min. 20°C approx. 10 min. until mat humidity max. 50% Drying at 60°C: 30 min. /
Infrared drying (short wave) 3 min. at 50% + 5 min. at 100% (medium wave) 15 – 20 min.
Sanding Dry with P400
Equipment cleaning: with water immediately after use. Collect waste water and treat it with HYDROPURE, if required.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
TRANSPARENT SEALER CP Transparent acrylic 2K sealer C 2.3 Product description 2-component sealer for wet-on-wet application. It can be used as an adhesion promoter and as a sealer for the refinishing of used cars. For design finishes or sign-writing on new cars, the product is suitable as an adhesion promoter. TRANSPARENT SEALER CP offers outstanding adhesion to fully cured solvent-resistant substrates that have been cleaned but not sanded. 2004/42/IIB(cII)(540)525: The EU limit value for this product (product category: IIB.cII) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 525 g/l.
Technical characteristics Shelf life: 24 months Density: 1.127 g/cm³ Theoretical spreading rate: 380 m²/l at 1 µm Colour: transparent Solids content: 64.8% by weight
Pre-treatment Remove any traces of grease or silicone with PK 900. Carefully wipe only small areas at a time. When respraying older vehicles, soak a sanding pad with PK 900 and clean the surface. Areas which are exposed to excessive stress (front area of the bonnet, door handle recess areas) should be dry sanded with P500 paper.
Mixing ratio
Stir well before use. TRANSPARENT SEALER CP 300 (vol.) 100 g D 80 / D 70 100 (vol.) 27 g SC 850 100 (vol.) 25 g
Spray viscosity Potlife
34 to 45 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 1 Film thickness: approx. 30 µm
Flash off Drying at 20°C: 30 min.
Further treatment Apply R-M topcoat wet on wet.
Intermediate sanding is required when flash-off time exceeds 3 hours at 20°C.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
AM 870 SEALERPLAST 90 Adhesion primer for plastics C 2.3 Product description Adhesion primer for plastics ensures good adhesion of the following coats (filler, topcoat). 2004/42/IIB(e)(840)688: The EU limit value for this product (product category: IIB.e) in ready-for-use form is max 840
grams of VOC per litre. The VOC content of this product is 688 g/l. Technical characteristics Shelf life: 24 months Density: 0.890 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: transparent Solids content: 6.9% by weight
Pre-treatment Clean with PK 700 or PK 1000 using a sanding pad. Clean with PK 1000. Important: thermoplastic finishes must be removed.
Mixing ratio Shake vigorously for 2 min. before use.
Application Number of spraycoats: 1 – 2 Film thickness: 5 µm
Flash off Drying at 20°C: 15 min.
Further treatment Apply R-M 2K PU filler wet on wet.
Apply AM 870 SEALERPLAST 90 again when the flash-off time exceeds 30 min. at 20°C.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 11/2010
EXTRASEALER WHITE 2K-Sealer C 2.3 Product description Two-component sealer that can be overcoated wet on wet with any R-M topcoat. Particularly suitable for use on new panels. EXTRASEALER WHITE can be mixed with 5% UNO HD mixing bases or 5% ONYX HD mixing bases. 2004/42/IIB(cI)(540)539: The EU limit value for this product (product category: IIB.cI) in ready-for-use form is max 540 grams of
VOC per litre. The VOC content of this product is 539 g/l. Technical characteristics Shelf life: 24 months Density: 1.460 g/cm³ Theoretical spreading rate: 331 m²/l at 1 µm Colour: white Solids content: 73.0% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P320). Clean with PK 1000. No need to sand new e-coated parts. Prime rather large bare metal areas with EUROFILL before filler application.
Mixing ratio
Stir well before use. EXTRASEALER WHITE 300 (vol.) 100g D 70 / D 80 100 (vol.) 23g FR 500 / SC 820 / SC 850 / SC 880 100 (vol.) 20g Mix well and strain before application.
Spray viscosity Potlife
35 to 45 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 1 Film thickness: 20 – 35 µm
Flash off Drying at 20°C: 15 min.
Further treatment Apply R-M topcoat wet on wet.
Parts coated with EXTRASEALER can be overcoated without intermediate sanding for up to 5 days.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 11/2010
EXTRASEALER BLACK 2K-Sealer C 2.3 Product description Two-component sealer that can be overcoated wet on wet with any R-M topcoat. Particularly suitable for use on new panels. 2004/42/IIB(cI)(540)539: The EU limit value for this product (product category: IIB.cI) inready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 539 g/l. Technical characteristics Shelf life: 24 months Density: 1.410 g/cm³ Theoretical spreading rate: 331 m²/l at 1 µm Colour: black Solids content: 74.0% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P320). Clean with PK 1000. No need to sand new e-coated parts. Prime rather large bare metal areas with EUROFILL before filler application.
Mixing ratio
Stir well before use. EXTRASEALER BLACK 300 (vol.) 100g D 70 / D 80 100 (vol.) 23g FR 500 / SC 820 / SC 850 / SC 880 100 (vol.) 21g Mix well and strain before application.
Spray viscosity Potlife
35 to 45 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 1 Film thickness: 20 – 35 µm
Flash off Drying at 20°C: 15 min.
Further treatment Apply R-M topcoat wet on wet.
Parts coated with EXTRASEALER BLACK can be overcoated without intermediate sanding for up to 5 days.
DIRECTFILLER 2K Primer Filler C 2.3 Product Description 2-component primer filler with special anti-corrosive properties for direct use on metal substrates (steel, aluminium, galvanised steel as per quality standard of the automotive industry). For efficient application, apply the product with ½ + 1 spraycoats. For higher build, you can also apply it with ½ + 2 spraycoats reaching an overall film thickness of up to 120 µm. Air drying requires a minimum temperature of +15°C. 2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form
is max. 540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.638 g/cm³ Calculated spreading rate: 519 m²/l at 1 µm Colour: grey Solids content: 72.8% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000.
Mixing ratio
Stir thoroughly before use. DIRECTFILLER 100 (vol.) 100 g D 701 20 (vol.) 13 g FR 500 20 (vol.) 11 g
Spray viscosity Potlife
40 to 50 seconds ISO 4 cup at 20°C 90 min at 20°C
Sprayguns
HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application
Spraycoats: ½ + 1 ½ + 2 Film thickness: 50 – 70 µm 80 – 120 µm
Drying
Drying at 20°C: 12 h 12 h Drying at 60°C: 35 min 45 min
Infrared drying (short wave) 10 min 15 min.
Sanding P400
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these statements do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 09/2012
DIRECTFILLER 2K Primer C 2.3 Product Description Two-component primer to be used as corrosion protection under R-M primer filler or sealer 2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form
is max. 540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.638 g/cm³ Calculated spreading rate: 519 m²/l at 1 µm Colour: grey Solids content: 72.8% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000.
Mixing ratio
Stir thoroughly before use. DIRECTFILLER 100 (vol.) 100 g D 701 20 (vol.) 13 g FR 500 20 (vol.) 11 g
Spray viscosity Potlife
40 to 50 seconds ISO 4 cup at 20°C 90 min at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.7 0.7 bar at the nozzle
Compliant gravity-feed spraygun 1.3 – 1.7 2.0 – 2.5 bar
Application Spraycoats: 1 thin coat (covering)
Film thickness: 10 – 20 µm
Flash-off time at 20°C 10 – 15 min
Further treatment After flash-off time, apply R-M primer filler or sealer. When the flash-off time exceeds 24 hours at 20°C, denib the surface to which primer filler or sealer will be applied.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
PERFECTFILLER BLACK 2K Fast Dry Surfacer C 2.3 Product description 2-component filler based on polyurethane. Very reliable in application; short drying times and very good sanding behaviour. Can be mixed with PERFECTFILLER WHITE at any ratio to produce different shades of grey. For the efficient repair the product is applied with 2 coats and for repairs requiring higher filling properties the product provides the opportunity to be applied in 3 coats up to 120 µm. 2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.490 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: black Solids content: 71.3% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000. Prime rather large bare metal areas with EUROFILL before filler application.
Mixing ratio
Stir well before use. PERFECTFILLER BLACK 100 (vol.) 100 g D 70 / D 80 25 (vol.) 17 g FR 500 25 (vol.) 15 g
Spray viscosity Potlife
40 to 58 seconds ISO 4 cup at 20°C 1 hour at 20°C
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle
Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application Number of spraycoats: 2 3
Film thickness: 50 – 70 µm 80 – 120 µm
Drying
Drying at 20°C: 3 hours Drying at 60°C: 20 min.
Infrared drying (short wave) 9 min.
Sanding P400
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
PERFECTFILLER GREY 2K Fast Dry Surfacer C 2.3 Product description 2-component filler based on polyurethane. Very reliable in application; short drying times and very good sanding behaviour. For the efficient repair the product is applied with 2 coats and for repairs requiring higher filling properties the product provides the opportunity to be applied in 3 coats up to 120 µm. 2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.650 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: grey Solids content: 73.3% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000. Prime rather large bare metal areas with EUROFILL before filler application.
Mixing ratio
Stir well before use. PERFECTFILLER GREY 100 (vol.) 100 g D 70 / D 80 25 (vol.) 15 g FR 500 25 (vol.) 13 g
Spray viscosity Potlife
40 to 58 seconds ISO 4 cup at 20°C 1 hour at 20°C
Sprayguns
HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application
Number of spraycoats: 2 3 Film thickness: 50 – 70 µm 80 – 120 µm
Drying Drying at 20°C: 3 hours
Drying at 60°C: 20 min.
Infrared drying (short wave) 9 min.
Sanding P400
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
PERFECTFILLER WHITE 2K Fast Dry Surfacer C 2.3 Product description 2-component filler based on polyurethane. Very reliable in application; short drying times and very good sanding behaviour. Can be mixed with PERFECTFILLER BLACK at any ratio to produce different shades of grey. For the efficient repair the product is applied with 2 coats and for repairs requiring higher filling properties the product provides the opportunity to be applied in 3 coats up to 120 µm. 2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.740 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: white Solids content: 77.2% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000. Prime rather large bare metal areas with EUROFILL before filler application.
Mixing ratio
Stir well before use. PERFECTFILLER WHITE 100 (vol.) 100 g D 70 / D80 25 (vol.) 14 g FR 500 25 (vol.) 12 g
Spray viscosity Potlife
40 to 58 seconds ISO 4 cup at 20°C 1 hour at 20°C
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle
Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application Number of spraycoats: 2 3
Film thickness: 50 – 70 µm 80 – 120 µm
Drying
Drying at 20°C: 3 hours Drying at 60°C: 20 min.
Infrared drying (short wave) 9 min.
Sanding P400
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 05/2012
PROFILLER BLACK 2K Primerfiller C 2.3 Product description
2-component filler based on polyurethane. Very reliable in application and very good sanding behaviour. Can be mixed with PROFILLER WHITE at any ratio to produce different shades of grey. PROFILLER BLACK can be mixed with SPEEDFLASH S to reduce the drying time (to 15 min at 60°C, 1.5h at 20°C or 6 min with short-wave infrared). Please observe that the potlife of the mixture is only 20 min at 20°C and can only be used for applying film thicknesses of 50 – 70µm.
2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form is max 540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.670 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: black Solids content: 76.0% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000. Prime rather large bare metal areas with EUROFILL before filler application.
Mixing ratio
Stir well before use. PROFILLER BLACK 100 (vol.) 100g D 70 / D80 25 (vol.) 14g FR 500 / SC820 / SC850 / SC880 25 (vol.) 13g
Spray viscosity Potlife
50 to 65 seconds ISO 4 cup at 20°C 1 hour at 20°C
Sprayguns
HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application
Number of spraycoats: 2 Film thickness: 50 – 70 µm
Drying
Drying at 20°C: 3 hours Drying at 60°C: 30 min.
Infrared drying
(short wave) 8 min. (medium wave) 10 – 15 min.
Dry-Sanding P400
Wet-Sanding P800
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 11/2010
PROFILLER BLACK 2K Primerfiller – high build version C 2.3 Product description PROFILLER BLACK version for repairs in which high build is required 2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.670 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: black Solids content: 76.0% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000. Prime rather large bare metal areas with STARFILL before filler application.
Mixing ratio
Stir well before use. PROFILLER BLACK 100 (vol.) 100g D 70 / D 80 25 (vol.) 14g FR 500 / SC 820 / SC 850 / SC 880 25 (vol.) 13g
Spray viscosity Potlife
50 to 65 seconds ISO 4 cup at 20°C 1 hour at 20°C
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle
Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application Number of spraycoats: 3 – 4
Film thickness: 100 – 200 µm
Drying
Drying at < 20°C: over night Drying at 60°C: 40 min.
Dry-Sanding P400
Wet-Sanding P800
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 05/2012
PROFILLER GREY 2K Primerfiller C 2.3 Product description
2-component filler based on polyurethane. Very reliable in application and very good sanding behaviour. PROFILLER GREY can be mixed with SPEEDFLASH S to reduce the drying time (to 15 min at 60°C, 1.5h at 20°C or 6 min with short-wave infrared). Please observe that the potlife of the mixture is only 20 min at 20°C and can only be used for applying film thicknesses of 50 – 70µm.
2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form is max 540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.715 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: grey Solids content: 76.0% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000. Prime rather large bare metal areas with EUROFILL before filler application.
Mixing ratio
Stir well before use. PROFILLER GREY 100 (vol.) 100g D 70 / D 80 25 (vol.) 14g FR 500 / SC 820 / SC 850 / SC 880 25 (vol.) 13g
Spray viscosity Potlife
50 to 65 seconds ISO 4 cup at 20°C 1 hour at 20°C
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle
Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application Number of spraycoats: 2
Film thickness: 50 – 70 µm
Drying
Drying at 20°C: 3 hours Drying at 60°C: 30 min.
Infrared drying (short wave) 8 min.
(medium wave) 10 – 15 min.
Dry-Sanding P400
Wet-Sanding P800
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 11/2010
PROFILLER GREY 2K Primerfiller – high build version C 2.3 Product description PROFILLER GREY version for repairs in which high build is required 2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.715 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: grey Solids content: 76.0% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000. Prime rather large bare metal areas with STARFILL before filler application.
Mixing ratio
Stir well before use. PROFILLER GREY 100 (vol.) 100g D 70 / D 80 25 (vol.) 14g FR 500 / SC 820 / SC 850 / SC 880 25 (vol.) 13g
Spray viscosity Potlife
50 to 65 seconds ISO 4 cup at 20°C 1 hour at 20°C
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle
Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application Number of spraycoats: 3 – 4
Film thickness: 100 – 200 µm
Drying
Drying at < 20°C: over night Drying at 60°C: 40 min.
Dry-Sanding P400
Wet-Sanding P800
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 05/2012
PROFILLER WHITE 2K Primerfiller C 2.3 Product description
2-component filler based on polyurethane. Very reliable in application and very good sanding behaviour. Can be mixed with PROFILLER BLACK at any ratio to produce different shades of grey. PROFILLER WHITE can be mixed with SPEEDFLASH S to reduce the drying time (to 15 min at 60°C, 1.5h at 20°C or 6 min with short-wave infrared). Please observe that the potlife of the mixture is only 20 min at 20°C and can only be used for applying film thicknesses of 50 – 70µm.
2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form is max 540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.710 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: white Solids content: 72.9% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000. Prime rather large bare metal areas with EUROFILL before filler application.
Mixing ratio
Stir well before use. PROFILLER WHITE 100 (vol.) 100g D 70 / D 80 25 (vol.) 14g FR 500 / SC 820 / SC 850 / SC 880 25 (vol.) 13g
Spray viscosity Potlife
50 to 65 seconds ISO 4 cup at 20°C 1 hour at 20°C
Sprayguns
HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application
Number of spraycoats: 2 Film thickness: 50 – 70 µm
Drying
Drying at 20°C: 3 hours Drying at 60°C: 30 min.
Infrared drying
(short wave) 8 min. (medium wave) 10 – 15 min.
Dry-Sanding P400
Wet-Sanding P800
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 11/2011
PROFILLER WHITE 2K Primerfiller – high build version C 2.3 Product description PROFILLER WHITE version for repairs in which high build is required 2004/42/IIB(cII)(540)539: The EU limit value for this product (product category: IIB.cII) in ready-for-use form is max
540 grams of VOC per litre. The VOC content of this product is 539 g/l.
Technical characteristics Shelf life: 24 months Density: 1.710 g/cm³ Theoretical spreading rate: 425 m²/l at 1 µm Colour: white Solids content: 72.9% by weight
Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and solvent-resistant old paintwork with P240). Clean with PK 1000. Prime rather large bare metal areas with STARFILL before filler application.
Mixing ratio
Stir well before use. PROFILLER WHITE 100 (vol.) 100g D 70 / D 80 25 (vol.) 14g FR 500 / SC 820 / SC 850 / SC 880 25 (vol.) 13g
Spray viscosity Potlife
50 to 65 seconds ISO 4 cup at 20°C 1 hour at 20°C
Sprayguns HVLP gravity-feed spraygun 1.7 – 1.9 0.7 bar at the nozzle
Compliant gravity-feed spraygun 1.6 – 1.8 2.0 – 2.5 bar
Application Number of spraycoats: 3 – 4
Film thickness: 100 – 200 µm
Drying
Drying at < 20°C: over night Drying at 60°C: 40 min.
Dry-Sanding P400
Wet-Sanding P800
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
ONYX HD Waterborne basecoat line C 3.1 Product description Mixing system for waterborne basecoats used in automotive refinishing. Mixing formulas for the whole range of (solid, metallic and pearl-effect) colours needed in automotive refinishing are available. At rather high temperatures or when refinishing large surfaces, it is possible to replace HB002 by HB004 slow, while replacing HYDROMIX adjusting base by HYDROMIX slow at the same time.
2004/42/IIB(d)(420)419: The EU limit value for this product (product category: IIB.d) in ready-for-use form is max 420 grams of VOC per litre. The VOC content of this product is 419 g/l.
Technical characteristics Shelf life: 60 months (tinting base) Density: 0.899 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: Solids content: approx. 15% by weight
Pre-treatment Clean with PK 2000. Sand with P400 (sanding filler or well-cured, solvent-resistant old paintwork). Clean with PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir the ONYX HD mixing bases on the mixing machine twice a day for 15 minutes. ONYX HD mixing bases 100 (vol.) depending on colour HYDROMIX 60 (vol.) 60 g Mix intensively immediately after weighing. Strain before application. Attention: Do not insert a screen in the spraygun when applying a metallic or pearl-effect basecoat. When usingHB004 slow in the mixing formula, HYDROMIX slow must also be used.
Spray viscosity Potlife
42 to 68 seconds ISO 4 cup at 20°C ONYX HD colours mixed to formula: 6 months in a sealed plastic vessel. ONYX HD ready for use: 1 week in a sealed plastic vessel.
Sprayguns HVLP gravity-feed spraygun 1.4 – 1.5 mm 0.7 bar at the nozzle
Application
Solid colours Metallic or pearl-effect colours Spraycoats: 2 – 3 1 or 2 + 1 coat to match the effect Film thickness: 20 – 25 µm 12 – 15 µm Flash off until mat after each spraycoat.
Drying
Drying at 20°C: approx. 15 min. Possibility to speed up the process with additional air flow Drying at 60°C: approx. 10 min. + cooling
Infrared arch
Drying IR 1st spraycoat, flash off at room temperature until mat. 2nd spraycoat, at 40-50°C (max 70°C) surface temperature to mat surface + cooling. Harmonising coat, flash off at room temperature until mat.
Further treatment Apply one of the recommended R-M clears. ONYX HD basecoats may be overcoated with the same product after the indicated drying times.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 10/2009
ONYX HD Jet black HB 203 C 3.1 Product description Jet black ONYX HD waterborne basecoat. 2004/42/IIB(d)(420)419: The EU limit value for this product (product category: IIB.d) in ready-for-use form is max
420 grams of VOC per litre. The VOC content of this product is 419 g/l. Technical characteristics Shelf life: 60 months Density: 0,979 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: jet black Solids content: 41,4 % by weight
Pre-treatment Clean with PK 2000. Sand with P400 (sanding filler or well-cured, solvent-resistant old paintwork). Clean with PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir HB 203 on the mixing machine twice a day for 15 minutes. ONYX HD mixing bases
HB 002 71,5 Vol. 71,5 g HB 203 28,5 Vol. 28,5 g
HYDROMIX 60 Vol. 60 g
Mix HB 002 and HB 203 and homogenise the mixture. Then add HYDROMIX, stir the paint again and strain it.
Spray viscosity Potlife
52 to 68 seconds ISO 4 cup at 20°C HB 203 colour mixed to formula: 6 months in a sealed plastic vessel. HB 203 ready for use: 1 week in a sealed plastic vessel.
Sprayguns HVLP gravity-feed spraygun 1.4 – 1.5 mm 0.7 bar at the nozzle
Application
Solid colour: Spraycoats: 2 Film thickness: 20 µm
Drying
The drying time depends on climatic conditions and equipment used. Drying at 20°C: approx. 15 min. Drying at 60°C: approx. 10 min. + cooling
Infrared drying
1st spraycoat: flash off at room temperature until mat. 2nd spraycoat: at 40-50°C (max 70°C) surface temperature to mat surface + cooling.
Further treatment Apply one of the recommended R-M clears. HB 203 may be overcoated with the same product or another ONYX HD basecoat provided that the indicated drying times have been observed.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
ONYX HD INTERIOR Direct-gloss systems (without a clear coat) C 3.1 Product description Reproduction of mat or silky mat direct-gloss finishes (to which no clear coat will be applied) from the ONYX HD mixing system. 2004/42/IIB(e)(840)800: The EU limit value for this product (product category: IIB.e) in ready-for-use form is max 840
grams of VOC per litre. The VOC content of this product is 800 g/l. Technical characteristics Shelf life: 24 months Density: 0.899 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: Solids content: approx. 15% by weight
Pre-treatment Clean with PK 2000. Sand with P400 (sanding filler and well-cured or solvent-resistant old paintwork). Clean with PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir the ONYX HD mixing bases on the mixing machine twice a day for 15 minutes. Replace the amount of HB 002 indicated in the ONYX HD mixing formula with the same amount of ONYX INTERIOR. ONYX HD colour* with ONYX INTERIOR 100 (vol.) 0.1 l ONYX ACTIVATOR 5 (vol.) 5 g SC 820 or SC 850 60 (vol.) 52 g *ONYX HD INTERIOR is unsuitable for use in combination with waterborne dispersions CB760, CB86R and CB83R.
Spray viscosity Potlife
31 to 37 seconds ISO 4 cup at 20°C 4 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.4 – 1.5 mm 0.7 bar at the nozzle
Application
Solid colours Metallic or pearl-effect colours Spraycoats: 2 – 3 1 or 2 + 1 mist coat Film thickness: 20 – 25 µm 12 – 15 µm Flash off until mat after each spraycoat.
Drying Drying at 20°C: 15 min. Drying at 60°C: no
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2011
ONYX HD Deep Black DB 403 C 3.1 Product description Deep Black ONYX HD waterborne basecoat. 2004/42/IIB(d)(420)419: The EU limit value for this product (product category: IIB.d) in ready-for-use form is max
420 grams of VOC per litre. The VOC content of this product is 419 g/l. Technical characteristics Shelf life: 36 months Density: 0,978 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: deep black Solids content: 38,3 % by weight
Pre-treatment Clean with PK 2000. Sand with P400 (sanding filler or well-cured, solvent-resistant old paintwork). Clean with PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir DB 403 on the mixing machine twice a day for 15 minutes. ONYX HD mixing bases
HB 002 71,5 Vol. 71,5 g DB 403 28,5 Vol. 28,5 g
HYDROMIX 60 Vol. 60 g
Mix HB 002 and DB 403 and homogenise the mixture. Then add HYDROMIX, stir the paint again and strain it.
Spray viscosity Potlife
52 to 68 seconds ISO 4 cup at 20°C DB 403 colour mixed to formula: 6 months in a sealed plastic vessel. DB 403 ready for use: 1 week in a sealed plastic vessel.
Sprayguns HVLP gravity-feed spraygun 1.4 – 1.5 mm 0.7 bar at the nozzle
Application
Solid colour: Spraycoats: 2 Film thickness: 20 µm
Drying
The drying time depends on climatic conditions and equipment used. Drying at 20°C: approx. 15 min. Drying at 60°C: approx. 10 min. + cooling
Infrared drying 1st spraycoat: flash off at room temperature until mat. 2nd spraycoat: at 40-50°C (max 70°C) surface temperature to mat surface + cooling.
Further treatment Apply one of the recommended R-M clears. DB 403 may be overcoated with the same product or another ONYX HD basecoat provided that the indicated drying times have been observed.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
DIAMONT Basecoat for basecoat/clearcoat systems C 3.2 Product description Basecoats for repairing automotive basecoat-clearcoat finishes (metallic, pearl effect and solid colours)
Technical characteristics Shelf life: 60 months Density: 0.918 – 1.078 g/cm³ Theor. spreading rate: 105 m²/l (avrg) at 1 µm Colour: mixing system Solids content: 20.8 – 38.1% by weight
Pre-treatment Clean with PK 700 or PK 2000. Sand with P400 (sanding filler and well-cured solvent-resistant old paintwork). Clean with PK 700 or PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir well before use. Twice per day for 15 min. on the mixing machine. DIAMONT 100 (vol.) depending on colour BC 020 (15°C – 25°C) BC 030 (>25°C) 60 (vol.) 53 g Mix well and strain before application. In higher temperatures, the use of BC 030 thinner is recommended. Please note: when a film thickness of more than 35 µm is required (more than 4 spraycoats, e.g. in the case of multi-colour finishes), it is necessary to add 5% of H 9000 hardener to the basecoat.
Spray viscosity Potlife
22 to 25 seconds ISO 4 cup at 20°C 24 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 bar
Application
Solid colours Metallic and pearl effect colours Number of spraycoats: 2 2 + 1 to match effect Film thickness: 15 – 20 µm 15 µm
Drying Drying at 20°C: 5 min.
Further treatment After the flash-off, apply R-M clear wet on wet.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
DIAMONT Basecoat for three-stage systems C 3.2 Product description Basecoats for repairing automotive three-stage finishes (metallic, pearl effect and solid colours)
Technical characteristics Shelf life: 60 months Density: 0.918 – 1.078 g/cm³ Theor. spreading rate: 105 m²/l (avrg) at 1 µm Colour: mixing system Solids content: 20.8 – 38.1% by weight
Pre-treatment Clean with PK 700 or PK 2000. Sand with P400 (sanding filler and well-cured solvent-resistant old paintwork). Clean with PK 700 or PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir well before use. Twice per day for 15 min. on the mixing machine. DIAMONT - Step 1 100 (vol.) depending on colour H 9000 5 (vol.) 5 g BC 020 (15°C – 25°) BC 030 (>25°C) 60 (vol.) 53 g Mix well and strain before application. DIAMONT - Step 2 100 (vol.) depending on colour BC 020 (15°C – 25°C) BC 030 (>25°C) 60 (vol.) 53 g Mix well and strain before application.
Spray viscosity Potlife
22 to 28 seconds ISO 4 cup at 20°C Step 1: 5 hours at 20°C Step 2: 24 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 bar
Application
Solid colours Metallic and pearl effect colours Number of spraycoats: 2 2 + 1 to match effect Film thickness: 15 – 20 µm 15 µm
Drying Drying at 20°C: 15 min.
Further treatment After the flash-off, apply R-M clear wet on wet.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2011
PUR BLACK DIAMONT D 403 Jet black basecoat C 3.2 Product description Jet black basecoat for repairing automotive finishes
Technical characteristics Shelf life: 24 months Density: 0.921 g/cm³ Theoretical spreading rate: 115 m²/l at 1 µm Colour: jet black Solids content: 25.3 % by weight
Pre-treatment Clean with PK 700 or PK 2000. Sand with P400 (sanding filler and well-cured solvent-resistant old paintwork). Clean with PK 700 or PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir well before use. 2 mal täglich 15 min. im Mischregal. DIAMONT D 403 100 (vol.) 100 g BC 020 60 (vol.) 53 g Mix well and strain before application.
Spray viscosity Potlife
40 seconds ISO 4 cup at 20°C 24 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 2 Film thickness: 20 µm
Drying Drying at 20°C: 15 min.
Further treatment After the flash-off, apply R-M clear wet on wet.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
UNO HD SC 804 Mat black C 3.3 Product description Factory-packed mat black UNO HD direct-gloss topcoat. 2004/42/IIB(e)(840)600: The EU limit value for this product (product category: IIB.e)
in ready-for-use form is max 840 grams of VOC per litre. The VOC content of this product is 600 g/l.
Technical characteristics Shelf life: 36 months Density: 1.061 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: mat black Solids content: 42.0 % by weight
Pre-treatment Clean with PK 700 or PK 2000. Sand with P400 (sanding filler and well-cured or solvent-resistant old paintwork). Clean with PK 700 or PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir well before use. UNO HD SC 804 100 (vol.) 100 g H 9000 25 (vol.) 27 g SC 850 25 (vol.) 23 g
Or, with H 420 hardener: UNO HD SC 804 100 g H 420 21 g SC 850 23 g
Mix well and strain before application. Use the SC 820 thinner for small repairs or when working in low temperatures. Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
45 to 52 seconds ISO 4 cup at 20°C 3 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Spraycoats: 2 Film thickness: 40 – 50 µm Flash off until mat between spraycoats.
Drying
Drying at 20°C: dust-free after 30 min. ready for assembly after 2 hours fully cured after 24 hours Drying at 60°C: 30 min.
Infrared drying
(short wave) 8 min. (medium wave)
Further treatment May be overcoated with the same product after full curing or after the indicated drying times.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 10/2012
UNO HD 420 Jet black SC 203 C 3.3 Product description Factory-packed UNO HD CP topcoat. 2004/42/IIB(d)(420)410: The EU limit value for this product (product category: IIB.d) in ready-for-use form is max
420 grams of VOC per litre. The VOC content of this product is 410 g/l. Technical characteristics Shelf life: 36 months Density: 1.024 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: jet black Solids content: 63.2 % by weight
Pre-treatment Clean with PK 2000. Sand with P400 (sanding filler and well-cured or solvent-resistant old paintwork). Clean with PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir well before use. SC 203 100 (vol.) 100 g H 420 25 (vol.) 28 g SC 850 25 (vol.) 23 g Mix well and strain before application. Use the SC 820 thinner for small repairs or when working in low temperatures. Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
68 to 70 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Spraycoats: 1 thin + 1 full coat Film thickness: 50 – 60 µm
Drying Drying at 20°C: / Drying at 60°C: 30 min.
Infrared drying (short wave) 3 min. at 50% + 10 min. at 100%
(medium wave)
Further treatment Finishing operations after full curing or after the specified drying times + cooling. May be overcoated with the same product after the indicated drying time.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 08/2010
UNO HD CP High-density topcoat for solid-colour finishes C 3.3 Product description High solids (HD = high density) 2K solid-colour direct-gloss topcoat for automotive refinishing. 2004/42/IIB(d)(420)419: The EU limit value for this product (product category: IIB.d) in ready-for-use form is max 420 grams
of VOC per litre. The VOC content of this product is 419 g/l. Technical characteristics Shelf life: 36 months Density: 1.005 – 1.275 g/cm³ Theor. spreading rate: 300 m²/l (avrg) at 1 µm Colour: mixing system Solids content: 51.3 – 71.3 % by weight
Pre-treatment Clean with PK 2000. Sand with P400 (sanding filler and well-cured or solvent-resistant old paintwork). Clean with PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir well before use. UNO HD CP colour with SC 07 and SC 17 100 (vol.) depending on colour H 420 25 (vol.) 28 g SC 850 25 (vol.) 23 g Mix well and strain before application. Use the SC 820 thinner for small repairs or when working in low temperatures. Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
37 to 52 seconds ISO 4 cup at 20°C 1 hour 30 min. at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Spraycoats: 1 thin + 1 wet coat Film thickness: 60 µm
Drying Drying at 20°C: no Drying at 60°C: 30 min.
Infrared drying (short wave) 3 min. at 50% + 10 min. at 100% (medium wave)
Further treatment Finishing operations after full curing or after the specified drying times + cooling. May be overcoated with the same product after the indicated drying times.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 08/2010
UNO HD CP High-density topcoat for mat and/or textured solid-colour finishes C 3.3 Product description 2K solid-colour direct-gloss topcoat for repairing mat and/or textured automotive finishes. 2004/42/IIB(e)(840)839: The EU limit value for this product (product category: IIB.e) in ready-for-use form is max 840
grams of VOC per litre. The VOC content of this product is 839 g/l.
Technical characteristics Shelf life: 36 months Density: 1.005 – 1.275 g/cm³ Theor. spreading rate: 300 m²/l (avrg) at 1 µm Colour: mixing system Solids content: 51.3 – 71.3 % by weight
Pretreatment Clean with PK 2000. Sand with P400 (sanding filler and well-cured or solvent-resistant old paintwork). Clean with PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Mat and/or Gloss-reduced and/or textured textured UNO HD CP colour with SC 07 and SC 17 50 (vol.) 70 (vol.) SPECIAL MAT 09 or MT 900 50 (vol.) * 30 (vol.) * H 420 25 (vol.) 25 (vol.) SC 820 25 (vol.) 25 (vol.)
* or as specified in the mixing formula Mix well and strain before application. Use the slower SC 850 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
37 to 52 seconds ISO 4 cup at 20°C 1 hour 30 min. at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed gun 1.3 – 1.4 2.0 – 2.5 bar
Application Spraycoats: 1 thin + 1 wet coat Film thickness: 60 µm Flash off until mat between spraycoats and before stoving.
Drying Drying at 20°C: no Drying at 60°C: 30 min.
Infrared drying (short wave) 3 min. at 50% + 10 min. at 100%
(medium wave)
Further treatment May be overcoated with the same product after the indicated drying times.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
CHRONOLUX CP Fast drying clear with low solvent content C 4 Product description Fast drying clear with low solvent content. Suitable for small repairs (blend-in repairs, refinishing of one or two vertical panels). 2004/42/IIB(d)(420)419: The EU limit value for this product (product category: IIB.d) in ready-for-use form is
max 420 grams of VOC per litre. The VOC content of this product is 419 g/l. Technical characteristics Shelf life: 36 months Density: 1.024 g/cm³ Theoretical spreading rate: 315 m²/l at 1 µm Colour: transparent Solids content: 61.2% by weight
Pre-treatment CHRONOLUX CP was designed for use on ONYX HD basecoats.
Mixing ratio
CHRONOLUX CP 300 (vol.) 100 g H 420 100 (vol.) 36 g SC 820 100 (vol.) 28 g Mix well and strain before application. Note: Use the slower SC 850 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
48 to 54 seconds ISO 4 cup at 20°C 90 minutes at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application
Number of spraycoats: 2 Film thickness: 40 – 60 µm 1 – 2 minutes between spraycoats On vertical surfaces, apply one thin and one full spraycoat without intermediate flash-off (film thickness of approx. 50 µm).
Drying
Dust-free after 2 hours Drying at 20°C: Ready for assembly after 3 hours Fully cured after 12 hours Drying at 60°C: 15 min. when using SC 820 20 min. when using SC 850
Infrared drying
(short wave) 8 min. (medium wave)
Further treatment Finishing operations after specified drying times and cooling
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
CHRONOTOP Fast drying clear C 4 Product description Fast drying clear for small repairs (blend-in repairs, refinishing of one or two vertical panels).
Technical characteristics Shelf life: 36 months Density: 0.971 g/cm³ Theoretical spreading rate: 214 m²/l at 1 µm Colour: transparent Solids content: 41.5 % by weight
Pre-treatment CHRONOTOP was designed for use on DIAMONT basecoats.
Mixing ratio
CHRONOTOP 100 (vol.) 100 g H 9000 25 (vol.) 27 g BC 020 25 – 50 (vol.) 23 – 45 g Mix well and strain before application. Note: Use slow BC 030 thinner in high temperatures or when air speed in booth is high.
Spray viscosity Potlife
20 to 28 seconds ISO 4 cup at 20°C 4 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 2 Film thickness: 50 µm
Drying
Drying at 20°C: Dust-free after 20 min. Ready for assembly after 2 hours Fully cured after 10 hours Drying at 60°C: 15 min.
Infrared drying
(short wave) 8 min. (medium wave)
Further treatment Finishing operations after specified drying times and cooling
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
CRYSTALTOP HD High solids 2K clear C 4 Product description High solids (HD = high density) clear for applications ranging from repair of individual panels to overall resprays.
Technical characteristics Shelf life: 36 months Density: 1.003 g/cm³ Theoretical spreading rate: 252 m²/l at 1 µm Colour: transparent Solids content: 52.2 % by weight
Pre-treatment CRYSTALTOP HD is suitable for use on DIAMONT and ONYX HD basecoats.
Mixing ratio
CRYSTALTOP HD 100 (vol.) 100 g H 9000 25 (vol.) 27 g SC 850 25 (vol.) 22 g Mix well and strain before application. Note: Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
42 to 48 seconds ISO 4 cup at 20°C 2 hours 30 minutes at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 1 thin + 1 wet coat Film thickness: 60 – 70 µm
Drying
Drying at 20°C: dust-free after 2 hours ready for assembly after 8 hours fully cured after 48 hours Drying at 60°C: 30 min.
Infrared drying
(short wave) 8 min. (medium wave)
Further treatment Finishing operations after specified drying times and cooling.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 05/2012
STARLUX CP / CHRONOLUX CP Gloss-reduced and/or textured finishes C 4 Product description Clears to produce gloss-reduced and/or textured finishes.
2004/42/IIB(e)(840)839: The EU limit value for this product (product category: IIB.e)
in ready-for-use form is max 840 grams of VOC per litre. The VOC content of this product is 839 g/l.
Technical characteristics Shelf life: 36 months Density: 1.022 – 1.024 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: transparent Solids content: 58.1 – 61.2 % by weight
Pretreatment STARLUX CP and CHRONOLUX CP are suitable for use on ONYX HD basecoats.
Mixing ratio
Mat and/or Gloss-reduced and/or textured textured STARLUX CP 150 (vol.) 100 g 200 (vol.) 100 g SPECIAL MAT 09/MT 900 150 (vol.) * 96 g 100 (vol.) * 48 g H 420 100 (vol.) 73 g 150 (vol.) 82 g SC 820 100 (vol.) 56 g 100 (vol.) 42 g * or as specified in the mixing formula Mix well and strain before application. Note: Use the slower SC 850 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
52 to 62 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed gun 1.3 – 1.4 2.0 – 2.5 bar
Application Spraycoats: 1 thin + 1 wet coat Film thickness: 40 – 50 µm Flash off until mat between spraycoats and before stoving.
Drying Drying at 60°C: 30 min.
Infrared drying (short wave) 3 min. at 50% + 10 min. at 100%
(medium wave)
Further treatment May be overcoated with the same product after the indicated drying times.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
CRYSTALCLEAR CP Clear with low solvent content C 4 Product description Clear with low solvent content for applications ranging from repair of individual panels to overall resprays.
2004/42/IIB(d)(420)419: The EU limit value for this product (product category: IB.d) in ready-for-use form is max
420 grams of VOC per litre. The VOC content of this product is 419 g/l. Technical characteristics Shelf life: 36 months Density: 1.018 g/cm³ Theoretical spreading rate: 311 m²/l at 1 µm Colour: transparent Solids content: 61 % by weight
Pre-treatment CRYSTALCLEAR CP is intended for use on ONYX HD.
Mixing ratio
CRYSTALCLEAR CP 300 (vol.) 100 g H 420 100 (vol.) 37 g SC 850 100 (vol.) 29 g Mix well and strain before application. Note: Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
48 to 58 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed gun 1.3 – 1.4 2.0 – 2.5 bar
Application
Spraycoats: 2 Film thickness: 40 – 60 µm On vertical surfaces, apply one thin and one full spraycoat without intermediate flash-off (film thickness of approx. 50 µm).
Drying Drying at 60°C: 30 min.
Infrared drying
(short wave) 8 min. (medium wave) 10 – 15 min.
Further treatment Finishing operations after specified drying times and cooling.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
DIAMONTCLEAR CP Clear with low solvent content C 4 Product description Clear with low solvent content for applications ranging from repair of individual panels to overall resprays.
2004/42/IIB(d)(420)419: The EU limit value for this product (product category: IIB.d) in ready-for-use form is max 420
grams of VOC per litre. The VOC content of this product is 419 g/l. Technical characteristics Shelf life: 36 months Density: 1,020 g/cm³ Theoretical spreading rate: 311 m²/l at 1 µm Colour: transparent Solids content: 61 % by weight
Pre-treatment DIAMONTCLEAR CP was designed for use on ONYX HD basecoats.
Mixing ratio
DIAMONTCLEAR CP 300 (vol.) 100 g H 420 100 (vol.) 36 g SC 850 100 (vol.) 29 g Mix well and strain before application. Note: Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
52 to 62 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application
Number of spraycoats: 2 Film thickness: 40 – 60 µm On vertical surfaces, apply one thin and one full spraycoat without intermediate flash-off (film thickness of approx. 50 µm).
Drying Drying at 60°C: 30 min.
Infrared drying
(short wave) 8 min. (medium wave) 10 – 15 min.
Further treatment Finishing operations after specified drying times and cooling
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
SATINTOP Clear for a silky mat surface C 4 Product description SATINTOP is a clear that produces a uniformly silky mat surface. In order to achieve different gloss levels (12-65 units at an angle of 60°), you can mix the product with R-M SILICATOP Clear. For further information, please refer to B 6 "Matt Shade concept". 2004/42/IIB(e)(840)700: The EU limit value for this product (product category: IIB.e) in ready-for-use form is max 840
grams of VOC per litre. The VOC content of this product is 700 g/l. Technical characteristics Shelf life: 24 months Density: 0.995 g/cm³ Theoretical spreading rate: 294 m²/l at 1 µm Colour: transparent Solids content: 45.2 % by weight
Pre-treatment SATINTOP can be applied over R-M basecoats.
Mixing ratio
Stir well before use. SATINTOP 100 (vol.) 100 g H 9000 25 (vol.) 27 g SC 850 25 (vol.) 22 g When using the hardener H 420: SATINTOP 100 g H 420 23 g SC 850 36 g Mix well and strain before application.
Spray viscosity Potlife
32 to 36 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application
Spraycoats: 2 Film thickness: 40 – 50 µm Flash off until mat between spraycoats and before stoving. After the first spraycoat, allow to flash off for 10 - 15 min, after the second spraycoat for 15 - 20 min.
Drying Drying at 60°C: 30 min.
Infrared drying (short wave) 3 min. at 50% + 6 min. at 100% (medium wave) 13 min.
Further treatment May be overcoated with the same product after the indicated drying times.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
SILICATOP Clear for a mat surface C 4 Product description SILICATOP is a clear that produces a uniformly mat surface. In order to achieve different gloss levels (12-65 units at an angle of 60°), you can mix the product with R-M SATINTOP Clear. For further information, please refer to B 6 "Matt Shade concept". 2004/42/IIB(e)(840)700: The EU limit value for this product (product category: IIB.e) in ready-for-use form is max 840
grams of VOC per litre. The VOC content of this product is 700 g/l. Technical characteristics Shelf life: 24 months Density: 0.976 g/cm³ Theoretical spreading rate: 235 m²/l at 1 µm Colour: transparent Solids content: 36.1 % by weight
Pre-treatment SILICATOP can be applied over R-M basecoats.
Mixing ratio
Stir well before use. SILICATOP 100 (vol.) 100 g H 9000 25 (vol.) 27 g SC 850 25 (vol.) 22 g When using the hardener H 420: SILICATOP 100 g H 420 23 g SC 850 36 g Mix well and strain before application.
Spray viscosity Potlife
38 to 42 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application
Spraycoats: 2 Film thickness: 40 – 50 µm Flash off until mat between spraycoats and before stoving. After the first spraycoat, allow to flash off for 10 - 15 min, after the second spraycoat for 15 - 20 min.
Drying Drying at 60°C: 30 min.
Infrared drying (short wave) 3 min. at 50% + 6 min. at 100% (medium wave) 13 min.
Further treatment May be overcoated with the same product after the indicated drying times.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
STARLUX CP Clear with low solvent content C 4 Product description Clear with low solvent content for applications ranging from repair of individual panels to overall resprays.
2004/42/IIB(d)(420)419: The EU limit value for this product (product category: IIB.d) in ready-for-use form is max 420 grams of VOC per litre. The VOC content of this product is 419 g/l.
Technical characteristics Shelf life: 36 months Density: 1.022 g/cm³ Theoretical spreading rate: 311 m²/l at 1 µm Colour: transparent Solids content: 58.1 % by weight
Pre-treatment STARLUX CP was designed for use on ONYX HD basecoats.
Mixing ratio
STARLUX CP 300 (vol.) 100 g H 420 100 (vol.) 36 g SC 820 100 (vol.) 29 g Mix well and strain before application. Note: Use the slower SC 850 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
52 to 62 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 1 thin + 1 wet coat Film thickness: 40 – 60 µm 3 minutes between spraycoats
Drying Drying at 60°C: 30 min.
Infrared drying (short wave) 8 min.
(medium wave)
Further treatment Finishing operations after specified drying times and cooling
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l'Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
STARTOP HS 2K PU clear C 4 Product description Multi-purpose clear for applications ranging from repair of individual panels to overall resprays.
Technical characteristics Shelf life: 36 months Density: 0.950 g/cm³ Theoretical spreading rate: 220 m²/l at 1 µm Colour: transparent Solids content: 42.3 % by weight
Pre-treatment STARTOP HS was designed for use on DIAMONT and ONYX HD basecoats.
Mixing ratio
STARTOP HS 100 (vol.) 100 g H 9000 25 (vol.) 27 g BC 020 (15°C – 25°C) BC 030 (> 25°C) 25 (vol.) 22 g Mix well and strain before application.
Spray viscosity Potlife
28 to 34 seconds ISO 4 cup at 20°C 3 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 2 Film thickness: 50 – 60 µm Important: Stove immediately after paint application (no flash-off).
Drying
Drying at 20°C: Dust-free after 1 hour Ready for assembly after 5 hours Fully cured after 24 hours Drying at 60°C: 30 min.
Infrared drying
(short wave) 8 min. (medium wave)
Further treatment Finishing operations after specified drying times and cooling
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2011
SUPREMELUX CP Scratch-resistant clear with low solvent content C 4 Product description Low-solvent clear for repairing vehicles with scratch-resistant original paint finishes. 2004/42/IIB(d)(420)419: The EU limit value for this product (product category: IIB.d) in ready-for-use form is max 420 grams of VOC per litre. The VOC content of this product is 419 g/l.
Technical characteristics Shelf life: 36 months Density: 1.009 g/cm³ Theoretical spreading rate: 320 m²/l at 1 µm Colour: transparent Solids content: 62.2 % by weight
Pre-treatment SUPREMELUX CP was designed for use on ONYX HD basecoats.
Mixing ratio
SUPREMELUX CP 300 (vol.) 100 g H 420 100 (vol.) 37 g SC 850 100 (vol.) 29 g Mix well and strain before application. Note: Use the slower SC 880 thinner in temperatures above 25°C or when refinishing large surfaces.
Spray viscosity Potlife
44 to 52 seconds ISO 4 cup at 20°C 2 hours at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application
Number of spraycoats: 2 Film thickness: 40 – 60 µm 3 minutes between spraycoats On vertical surfaces, apply one thin and one full spraycoat without intermediate flash-off (film thickness of approx. 50 µm).
Drying Drying at 60°C: 30 min.
Infrared drying (short wave) 8 min.
(medium wave)
Further treatment Finishing operations after specified drying times and cooling
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2011
FLEX Plasticiser for polyurethane products C 5 Product description Plasticiser for use in R-M polyurethane products (2K fillers, 2K topcoats, 2K clears). FLEX increases the flexibility of polyurethane products, making it possible to paint plastics and composites regardless of their flexibility.
Technical characteristics Shelf life: 36 months Density: 1,000 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: transparent Solids content: 48.5% by weight
Pre-treatment See PREP’ART A 1.5 – A 1.6
Mixing ratio The amount of FLEX to be added to the 2K products varies and depends on the flexibility of the plastic to be painted. See painting processes A 1.6.1 – A 1.6.4
Potlife The addition of FLEX does not change the potlife significantly.
Sprayguns As specified in the technical data sheet of the product in which FLEX is being used.
Application As specified in the technical data sheet of the product in which FLEX is being used.
Drying The addition of FLEX increases the drying times of the products. Do not force-dry refinishes on PU foam because this might lead to pinholing defects.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 11/2010
FLEXPRO Additive to prepare EXTRASEALER WHITE / BLACK for direct application to plastics
C 5 Product description Additive which makes EXTRASEALER suitable for direct application to all paintable plastic substrates normally used in the automotive industry. The addition of FLEXPRO does not produce adhesion to unpaintable pure polypropylene (PP) and polyethylene (PE).
Technical characteristics Shelf life: 24 months Density: 0.892 g/cm³ Theoretical spreading rate: 340 m²/l at 1 µm Colour: yellow, transparent Solids content: 10.6% by weight
Pre-treatment Clean with PK 700 or PK 1000 using a sanding pad. Clean with PK 1000.
Mixing ratio
Stir well before use. EXTRASEALER WHITE / BLACK 300 (vol.) 100 g D 80 D 70 100 (vol.) 23 g FLEXPRO 100 (vol.) 21 g
Spray viscosity Potlife
40 to 47 seconds ISO cup at 20°C 3 hours at 20°C
Sprayguns HVLP-gravity-feed spraygun 1,3 – 1,5 0,7 bar at the nozzle Compliant gravity-feed spraygun 1,3 – 1,4 2,5 bar
Application Sealer Sanding filler Number of spraycoats: 1 2 Film thickness: 20 – 35 µm 40 – 60 µm
Flash off 20°C 15 – 20 min., / until matt
Drying 60°C / 25 min.
Sanding / P 400
Manual sanding / P 500 – P 800
Further treatment
Apply R-M topcoat. When used in sealers: Plastic parts coated with EXTRASEALER WHITE / BLACK containing FLEXPRO can be overcoated without intermediate sanding within 5 days. If necessary, small inclusions can be removed with a fine sanding pad after 20 minutes of drying at 20°C.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 10/2012
MT 900 Fine concentrated texturing agent with matting effect C 5 Product description Texturing agent for R-M topcoats to reproduce the original texture and gloss level of painted plastic parts. Different textures (from fine to medium) can be produced by varying the amount of MT 900 added. MT 900 texturing agent is compatible with R-M topcoat UNO HD CP and with all R-M VOC clears. 2004/42/IIB(e)(840)839: The EU limit value for this product (product category: IIB.e) in ready-for-use form is max 840
grams of VOC per litre. The VOC content of this product is 839 g/l. Technical characteristics Shelf life: 24 months Density: 0.994 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: grey white Solids content: 40.5% by weight
Pre-treatment As specified in the technical data sheet of the product in which MT 900 is being used.
Mixing ratio
Option 1: When MT 900 is contained in the mixing formula, possibly in combination with SPECIAL MAT 09: mix the components respecting the amounts specified in the mixing formula. Prepare the paint for application by adding hardener and thinner as indicated in the technical data sheet of the topcoat or clear being adjusted. Option 2: When texturing an originally glossy topcoat or clear: add 25 to 50% of MT 900 to produce the desired texture. 25%: fine texture; 50%: medium texture Prepare the paint for application by adding hardener and thinner as indicated in the technical data sheet of the topcoat or clear being adjusted.
Potlife The addition of MT 900 will reduce the potlife of the topcoat in which it is used.
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 2 Film thickness: 50 – 60 µm Flash off until mat between spraycoats and before stoving.
Drying Drying at 60°C: 30 min.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 11/2012
MULTIFLASH Additive to accelerate drying C 5 Product description Additive used to reduce the drying times of R-M 2-component polyurethane products (fillers, topcoats and clears). MULTIFLASH increases the chemical reactivity of the products in which it is used, allowing shorter waiting times before sanding or polishing operations or reassembly can start. In addition, faster physical drying results in shorter flash-off times and higher application reliability. The amount of MULTIFLASH to be added corresponds with the amount of thinner indicated in the standard mixing ratio.
Technical characteristics Shelf life: 36 months Density: 0.850 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: transparent Solids content: 0.3 % by weight
Pre-treatment As specified in the technical data sheet of the product in which MULTIFLASH is being used.
Mixing ratio
Stir well before use.
PROFILLER GREY 100 (vol.) 100 g D 70 25 (vol.) 14 g MULTIFLASH 25 (vol.) 13 g
Note: use MULTIFLASH instead of the standard thinner in 2-component polyurethane fillers.
Potlife The use of MULTIFLASH in polyurethane products will reduce the potlife of the products.
Sprayguns As specified in the technical data sheet of the product in which MULTIFLASH is being used.
Application As specified in the technical data sheet of the product in which MULTIFLASH is being used.
Drying 60°C approx. 30% shorter compared with drying time of paint mixed to standard
ratio.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
MULTI SPOT Blending thinner C 5 Product description Blending thinner designed to melt in fade-out areas of UNO HD CP and R-M clears in blend-in repairs.
Technical characteristics Shelf life: 36 months Density: 0.881 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: transparent Solids content: 3.6% by weight
Pre-treatment See process described in “UNO HD Blending” B 2 and B 2.2.
. Mixing ratio
Tinted version Untinted version MULTI SPOT 5 (vol.) MULTI SPOT 100 (vol.) UNO HD CP colour RFU 1 (vol.) H 9000 2 (vol.)
Spray viscosity Potlife
15 to 17 seconds ISO 4 cup at 20°C 1 hour at 20°C
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 2 – 3 Film thickness: 10 µm
Drying Drying at 60°C: 30 min
Further treatment See process described in “UNO HD Blending” B 2 and B 2.2.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2011
BLENDING FLASH Blending thinner C 5 Product description Smoothes transition areas from blend-in zones to old paintwork. 2004/42/IIB(e)(840)839: The EU limit value for this product (product category: IIB.e) in ready-for-use form is max 840
grams of VOC per litre. The VOC content of this product is 839 g/l. Technical characteristics Shelf life: 60 months Density: 0.909 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: transparent Solids content: 1.3 % by weight
Pre-treatment See BLEND’ART processes.
Mixing ratio The product is ready for use.
Spray viscosity Potlife
17 seconds ISO 4 cup at 20°C N/A
Sprayguns HVLP minijet gun 1.0 – 1.2 0.5 – 0.7 bar at the nozzle
Application 2 – 3 spraycoats to the clear fade-out areas to smooth them.
Drying As recommended for the R-M clear used.
Further treatment If necessary, minor defects can be polished out with FINE BRIL once the clear coat has fully cured.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
AM 950 BLENDING FLASH Blending thinner C 5 Product description Smoothes transition areas from blend-in zones to old paintwork. 2004/42/IIB(e)(840)839: The EU limit value for this product (product category: IIB.e) in ready-for-use form is max 840
grams of VOC per litre. The VOC content of this product is 839 g/l. Technical characteristics Shelf life: 24 months Density: 0.730 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: transparent Solids content: < 1% by weight
Pre-treatment See BLEND’ART processes.
Mixing ratio The product is ready for use.
Application 2 – 3 spraycoats to the clear fade-out areas to smooth them.
Drying As recommended for the R-M clear used.
Further treatment If necessary, minor defects can be polished out with FINE BRIL once the clear coat has fully cured.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
ONYX BLENDER PRO Additive for blend-in repairs with ONXY HD C 5 Product description Water-based additive for refinishing with ONYX HD using a BLEND’ART process. For use in BLEND’ART processes either as a transparent precoat or as an additive in ONYX HD. 2004/42/IIB(d)(420)419: The EU limit value for this product (product category: IIB.d) in ready-for-use form is max
420 grams of VOC per litre. The VOC content of this product is 419 g/l. Technical characteristics Shelf life: 12 months Density: 0.995 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: milky white Solids content: 21.2 % by weight
Pre-treatment See process described in BLEND’ART ONYX HD
Mixing ratio
Shake well and strain before use. Transparent precoat Additive in ONYX HD ONYX BLENDER PRO 100 (vol.) 50 (vol.) ONYX HD (mixing formula) / 50 (vol.)
HYDROMIX 60 (vol.) 60 (vol.)
Spray viscosity Potlife
45 to 65 seconds ISO 4 cup at 20°C 8 h (one working day)
Sprayguns HVLP gravity-feed spraygun 1.4 – 1.5 0.7 bar at the nozzle Minijet HVLP 1.0 0.7 bar at the nozzle Select spraygun according to size of area to be refinished.
Application See process described in BLEND’ART ONYX HD
Drying See process described in BLEND’ART ONYX HD
Further treatment See process described in BLEND’ART ONYX HD
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
ONYX HD ACTIVATOR Activator for waterborne basecoats C 5 Product description Additive for solid-colour ONYX HD basecoats to improve tape resistance and hardness. Also suitable for use in solid-colour basecoats applied as a ground coat in ONYX HD 3-layer systems.
Technical characteristics Shelf life: 24 months Density: 1.080 g/cm³ Theoretical spreading rate: m²/l at 1 µm Colour: transparent Solids content: 78.2 % by weight
Pre-treatment Clean with PK 2000. Sand with P400 (sanding filler and well-cured or solvent-resistant old paintwork). Clean with PK 2000. Alternative: apply to R-M wet-on-wet filler or sealer.
Mixing ratio
Stir the ONYX HD mixing bases on the mixing machine twice a day for 15 minutes. ONYX HD solid colour* 100 (vol.) 0.1 l ONYX HD ACTIVATOR 5 (vol.) 5 g HYDROMIX 80 (vol.) 80 g Mix the ONYX HD basecoat to the formula and stir it carefully. Add ONYX HD ACTIVATOR and stir again carefully. Add HYDROMIX and stir carefully. Strain before application. * ONYX HD ACTIVATOR is unsuitable for use in mixing formulas which contain the
waterborne dispersions CB76O, CB86R or CB 83R.
Spray viscosity Potlife
42 to 68 seconds ISO 4 cup at 20°C Two hours at 20°C.
Sprayguns HVLP gravity-feed spraygun 1.4 – 1.5 mm 0.7 bar at the nozzle
Application
Solid colour or ground coat Spraycoats: 2 – 3 Film thickness: 20 – 25 µm For some colours, one further spraycoat may be necessary. Flash off until mat after each spraycoat.
Drying The drying time depends on climatic conditions and equipment used. Drying at 20°C: approx. 15 min. Drying at 60°C: approx. 10 min. + cooling
Infrared drying 1st spraycoat: flash off at room temperature until mat. 2nd spraycoat: at 40 – 50°C (max 70°C) surface temperature to mat surface + cooling.
Further treatment Apply one of the recommended R-M clears. ONYX HD basecoats may be overcoated with the same product after the indicated drying times.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
BRIL 852 Fine polishing compound C 5 Product description Silicone-free fine polishing compound for polishing automotive paintwork.
Technical characteristics Shelf life: 24 months Density: 1.300 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: white Solids content: 20.9 % by weight
Pre-treatment Sand areas to be polished with P1200 – P2000 – P3000. Wipe sanded areas dry with a clean lint-free cloth.
Mixing ratio BRIL 852 is ready for use.
Application
Apply product to the area to be polished manually and with a lint-free cloth or use a polishing machine in combination with a mutton cloth or a medium-hard foam pad. When using a polishing machine, spread BRIL 852 on a clean mutton cloth or foam pad and apply the polishing compound at low speed (500 rpm). While polishing, increase the speed to 2000 rpm max. and polish until all defects have been removed. Wipe off excess product with a clean and dry lint-free cloth.
Further treatment For the next finer polishing step, you can use FINE BRIL. Apply any standard silicone-free deep-gloss sealing polish to the polished areas to seal them.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 10/2012
SPECIAL MAT 09 Multi-purpose matting agent C 5 Product description Matting agent which allows to reduce the gloss level of R-M solid-colour topcoat and clears. SPECIAL MAT 09 is compatible with all R-M VOC clears and with the R-M topcoat UNO HD CP. 2004/42/IIB(e)(840)839: The EU limit value for this product (product category: IIB.e) in ready-for-use form is max 840
grams of VOC per litre. The VOC content of this product is 839 g/l. Technical characteristics Shelf life: 24 months Density: 0.986 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: grey white Solids content: 30.8% by weight
Pre-treatment As specified in the technical data sheet of the product in which SPECIAL MAT 09 is being used.
Mixing ratio
Stir well before use. Option 1: When SPECIAL MAT 09 is contained in the mixing formula, possibly in combination with MT 900: mix the components respecting the amounts specified in the mixing formula. Prepare the paint for application by adding hardener and thinner as indicated in the technical data sheet of the topcoat or clear being adjusted. Option 2: When matting an originally glossy topcoat / clear: add SPECIAL MAT 09 to produce the desired degree of matting. Satin gloss: UNO HD CP colour 70 (vol.) DIAMONTCLEAR CP 70 (vol.) SPECIAL MAT 09 30 (vol.) SPECIAL MAT 09 30 (vol.) Mat: UNO HD CP colour 50 (vol.) DIAMONTCLEAR CP 50 (vol.) SPECIAL MAT 09 50 (vol.) SPECIAL MAT 09 50 (vol.) Stir well. Then prepare the paint for application by adding hardener and thinner as indicated in the technical data sheet of the topcoat or clear being adjusted.
Potlife SPECIAL MAT 09 will reduce the potlife of the topcoat in which it is used.
Sprayguns HVLP gravity-feed spraygun 1.3 – 1.5 0.7 bar at the nozzle Compliant gravity-feed spraygun 1.3 – 1.4 2.0 – 2.5 bar
Application Number of spraycoats: 2 Film thickness: 50 – 60 µm Flash off until mat between spraycoats and before stoving.
Drying As specified in the technical data sheet of the product in which SPECIAL MAT 09 is being used.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
FINE BRIL Extra fine polishing liquid C 5 Product description Silicone-free polishing liquid for touching up minor defects in acrylic and polyurethane finishes.
Technical characteristics Shelf life: 24 months Density: 1.044 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: white Solids content: 22.1% by weight
Pre-treatment Use FINE BRIL only on fully dried paintwork.
Mixing ratio
Shake well before use. FINE BRIL is ready for use.
Application
Apply FINE BRIL by hand using a lint-free cloth or by machine using a mutton cloth, a soft foam head or a felt polishing pad. Apply FINE BRIL by machine at low speed (500 rpm) using a soaked soft foam head. Increase the speed without exceeding 2000 rpm and polish until all defects have been removed. Wipe off excess product with a clean and dry cloth.
Further treatment By demand, apply any standard silicone-free deep-gloss sealing polish to give the treated surfaces a deep and lasting shine.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2011
SPEEDFLASH Additive to accelerate drying C 5 Product description Additive to accelerate drying of R-M 2-component standard VOC clears on vertical surfaces. The additive can also be used to reduce the drying times of PERFECTFILLER. SPEEDFLASH increases the chemical reactivity of the products in which it is used, allowing shorter waiting times before sanding, polishing operations or reassembly can be started. The amount of SPEEDFLASH to be added corresponds with the amount of thinner indicated in the standard mixing ratio.
Technical characteristics Shelf life: 36 months Density: 0.875 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: transparent Solids content: < 0.5% by weight
Pre-treatment As specified in the technical data sheet of the product in which SPEEDFLASH is being used.
Mixing ratio
R-M standard VOC clear 300 (vol.) H 420 100 (vol.) SPEEDFLASH 100 (vol.) Mix well and strain before application.
PERFECTFILLER 100 (vol.) D 70 / D 80 25 (vol.) SPEEDFLASH 25 (vol.) Mix well and strain before application.
Potlife The use of SPEEDFLASH will reduce the potlife of the products.
Sprayguns As specified in the technical data sheet of the product in which SPEEDFLASH is being used.
Application As specified in the technical data sheet of the product in which SPEEDFLASH is being used.
Drying
50°C: 60°C: CHRONOLUX CP 15 min. 10 min. CRYSTALCLEAR CP / DIAMONTCLEAR CP / STARLUX CP 30 min. 20°C: 60°C: PERFECTFILLER WHITE / GREY / BLACK 2 h 15 min.
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 04/2012
SPEEDFLASH S Additive to accelerate drying C 5 Product description Additive to accelerate drying of R-M 2-component standard VOC clears on vertical surfaces. The additive can also be used to reduce the drying times of PERFECTFILLER and EXTRASEALER. SPEEDFLASH S increases the chemical reactivity of the products in which it is used, allowing shorter waiting times before sanding, polishing operations or reassembly can be started. SPEEDFLASH S is particularly suited for body shops that, in order to save energy, bake the applied clear at panel temperatures below 60°C.The amount of SPEEDFLASH S to be added corresponds with the amount of thinner indicated in the standard mixing ratio.
Technical characteristics Shelf life: 36 months Density: 0.870 g/cm³ Theoretical spreading rate: / m²/l at 1 µm Colour: transparent Solids content: ~ 1.0 % by weight
Pre-treatment As specified in the technical data sheet of the product in which SPEEDFLASH S is being used.
Mixing ratio
R-M Standard-VOC-Klarlack 300 Vol. H 420 100 Vol. SPEEDFLASH S 100 Vol. Mix well and strain before application
PERFECTFILLER 100 Vol. D 70 / D 80 25 Vol. SPEEDFLASH S 25 Vol. Mix well and strain before application
EXTRASEALER 300 Vol. D 80 / D 70 100 Vol. SPEEDFLASH S 100 Vol. Mix well and strain before application
Potlife The use of SPEEDFLASH S will considerably reduce the potlife of the product in which it is used.
Sprayguns As specified in the technical data sheet of the product in which SPEEDFLASH S is being used.
Application As specified in the technical data sheet of the product in which SPEEDFLASH S is being used.
Drying
40°C / 45°C 50°C CRYSTALCLEAR CP 30 min. 25 min. DIAMONTCLEAR CP 30 min. 25 min. STARLUX CP 30 min. 25 min. Alternative: Dust free or ready for assembly after a drying time of 10 minutes (40°C) and after cooling. Finishing operations after specified drying times and several hours of cooling or on the next day. 20°C 60°C: PERFECTFILLER WHITE / GREY / BLACK 1,5 h 10 min. EXTRASEALER WHITE / BLACK 10 min. /
Further treatment
After drying of 30 Min. at 20°C surface with EXTRASEALER WHITE / BLACK has to be lightly sanded
Pictograms D 1
Processing pictograms
Technical Information Pretreatment
See data sheet Cleaning
Mixing
Mixing ratio 1:1 for 2 components
Mixing ratio for 2 components
Mixing ratio for 3 components
Use mixing stick Hardener addition
Shake aerosol can before use
Viscosity adjustment
Application viscosity
Water-thinnable
Pictograms D 1
Application
Gravity-feed spraygun Suction-feed spraygun UB spraygun Number of spraycoats
Airless
Body-filling Brushing Roller coating Aerosol can Drying
Flash off Drying time Infrared drying
Sanding
Hand sanding / wet
Hand sanding / dry
Random orbital sander / wet (pneumatic)
Random orbital sander / dry (pneumatic)
Oscillating sander / wet (pneumatic)
Oscillating sander / dry
Polishing
Pictograms D 1
Colour
Most popular variant of this colour
Colour for engine compartment/boot
Colour for wheel rim and hubcap
Colour for add-on part
Formula contains mixing base being phased out
Mixing formula contains lead
Textured finish Gloss-reduced finish Indicates the relevant layer within a
multi-layer system
Direct-gloss topcoat colour or colour for multi-layer system
Tinted clear Undercoat Clear Three-layer system
Colour for interior
Colour for roof
Colour for accessories
Colour for add-on parts
Colour for trim strips
Pictograms D 1
Blend-in
within one panel Colour for
overall respray Stick AT0625 label on tin
See AT0625 data sheet
Light Dark Pure Dirty Small particles
4 5 6 8
Large particles Blue Green Yellow Red
Mixing formula matches Colormaster card
M6009A
Mixing formula similar to Colormaster card M6009A (different
pigmentation)
Colour card in production
New mixing formula
Pictograms D 1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2012
Storage
Protect from frost
Store in a cool place
Protect from humidity
Carefully seal container
Shelf life
Flow times Measured with different viscosity cups D 2
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 06/2009
Process description
Summary of flow times measured with different flow cups for the same product at the same viscosity at 20°C.
ISO 4 BS B4 AFNOR DIN 4
20 18 15 14
25 20 16 15
30 23 18 16
35 25 20 17
40 26 21 18
45 28 23 19
50 30 24 20
55 33 26 21
60 35 28 23
65 37 29 24
70 39 30 25
75 41 32 26
80 43 34 28
85 45 36 29
90 47 37 30
The figures shown above are the flow times measured in seconds.
Sanding paper grit sizes Abrasives to be used with undercoats D 3
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 01/2013
Process description
Recommended sanding processes and grit sizes to be used with the different products in automotive refinishing.
Sanding with orbital sander
Manual Sanding
Orbit diameter Coarse sanding Fine sanding
Putty
STOP UNI
5 – 7 mm P 80 / P 150 P 240
STOP MULTI
5 – 7 mm P 80 / P 150 P 240
STOP FILLER II
5 – 7 mm P 150 P 240
STOP FLEX
5 – 7 mm P 80 / P 150 P 240 / P 320
Primer filler
AM 850 PRIMEFILL
P 800
BASIC FILLER II CP
3 – 5 mm P 400 / P 500 P 800
EUROXY CP
3 – 5 mm P 400 P 800
HYDROFILLER II
3 – 5 mm P 400 / P 500 P 800
DIRECTFILLER
3 – 5 mm P 400 P 800
PERFECTFILLER WHITE
3 – 5 mm P 400 / P 500 P 800
PERFECTFILLER GREY
3 – 5 mm P 400 / P 500 P 800
PERFECTFILLER BLACK
3 – 5 mm P 400 / P 500 P 800
PROFILLER WHITE
3 – 5 mm P 400 / P 500 P 800
PROFILLER GREY
3 – 5 mm P 400 / P 500 P 800
PROFILLER BLACK
3 – 5 mm P 400 / P 500 P 800
Infrared drying Infrared drying parameters for R-M products D 4
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.rmpaint.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this product contains particles < 0.1 µm.
R-M Automotive Refinish Paints, Z.I.du Merret F-60676 Clermont de l’Oise Cedex, Tel. (+33) (0) 3 44 77 77 77, 12/2010
Process description
Recommended infrared drying parameters in automotive refinishing
IR intensity
Undercoat materials Duration Increase temperature by Max. surface temperature
STOP putties 4 min 20°C/min 80°C
STOP FILLER II 10 min 20°C/min 90°C
AKROFILL 3 min 7 min
15°C/min 20°C/min
65°C 100°C
Fillers 4 min 5 min
15°C/min 20°C/min
60°C 80°C
PERFECTFILLER with SPEEDFLASH
6 min 20°C/min 80°C
PERFECTFILLER with SPEEDFLASH S
4 min 20°C/min 80°C
Basecoats & topcoats
ONYX HD 4 min 15°C/min 60°C
DIAMONT 4 min 15°C/min 60°C
UNO HD 4 min 4 min
15°C/min 20°C/min
60°C 90°C
Clears
4 min 4 min
15°C/min 20°C/min
60°C 90°C