message from organizers - jetro.go.jp · kim sen kim long jat innotek foster enshu sanko curious...
TRANSCRIPT
VIETNAM - JAPAN - Supporting Industries Exhibition 3
Vietnam – Japan relationship has reached great achievements in terms of FDI. In first half of 2017, Japan ranks first among the countries and regions that have the largest registered investment capital in Vietnam. As of 20th June 2017, number of projects from Japan investing into Vietnam was 3,443 with total of registered investment capital was over USD 46.2 billion. A large number of Japanese companies, when being asked by the survey conducted by JETRO out of last year replied that they wanted to expand their production in Vietnam. Vietnam has been still evaluated as a significant production base and an attractive market by Japanese investors so far.
SIE 2017 is held under the framework of Vietnam-Japan Economic Partnership Agreement (VJEPA), which was signed by the two Governments in December 2008 and took effect from 1st October 2009. It was also one of the themes of the Vietnam – Japan Joint Initiative of phase 3.
On the other hands, according to JETRO’s survey on Japanese-affiliated companies in Asia and Oceania in 2016, the procurement rate of raw materials and parts, components by Japanese companies in Vietnam was only 34.2%. It was not so high in comparison with this figure in other neighboring countries such as, 40.5% in Indonesia, 57.1% in Thailand and 67.8% in China.
This year, SIE 2017 is also co-located with other 2 industrial specialized exhibitions; “NEPCON VIETNAM 2017 ” and “Industrial Components and Sub-contracting Vietnam 2017” by Reed Tradex Co., Ltd.
Therefore, JETRO and VIETRADE as the role of Governmental trade promotion agencies have cooperated to continuously organize “the 7th Vietnam-Japan Exhibition on Supporting Industries in Hanoi – so called SIE 2017”. The exhibition is offering a place for 40 Japanese exhibitors (as BUYERs) to show parts and components they expect to purchase in Vietnam and 40 Vietnamese exhibitors (as SELLERs) to exhibit their produced accessories and production capabilities to Japanese companies.
We are sure that the combination of these shows will make great effect for both exhibitors and visitors and being expected to create good business opportunities for all the concerned parties.
Also we expect all exhibitors and visitors to take full advantage of this event for networking.
MESSAGE FROM ORGANIZERSVIETNAM - JAPAN Supporting Industries Exhibition
September 2017
VIETNAM - JAPAN - Supporting Industries Exhibition 5
VENUE LAYOUT OF 3 EXHIBITIONS
As of: August, 2017
SIP
SINFONIAFUJI
SINGAPORE PAVILIONBY AEIS
KOREAPAVILION
JETRO
KYORITSU
JP32
JP33
JP34
JP35
JP36
JP37
JP38
JP39
JP40
JP24 JP17 JP10
D19
E01
E09 E10
E13
E17
E19 E20
F09
F11
F17
F19 F20
G13
G17 G18
G19
H09
H13
H15
I03
I06I05
I08I07
I10I09
I13
I18I15
I19
I24
I26I25
L01
L02
L03
L04
L10
L11
L14
JP03 JP02 JP01 K06 K09 K10 K12K07 K08
E22E21
E24E23
E26E25
F22F21
F24F23
F26F25
G22G21
G24G23
G25
VN33
CREATIVEENGINEERING
L05
L07
INFANTRONDOU YEE
TECHVALLEY
H03
WKK
PCB
HIBEX
DONG ILLINTEC
F18
JAPAN PAVILION
WES SZ
F01
UNILAM
UST
HEILIND
E07 E08
PANWORLD
D13
TAIWAN PAVILIONBY TEEMA
TAIWAN PAVILIONBY TEEIA
ENTRANCE
K05
JP25 JP18
JP26 JP19
JP27 JP20
JP28 JP21
JP29 JP22
VN28 VN23
VN29 VN24
VN30 VN25
VN31 VN26
VN32 VN27
JP11 JP05
JP12 JP06
JP13
JP14 JP07
JP15 JP08
VN17 VN12
VN18
VN19 VN13
VN20 VN14
VN21
VN22 VN15
VN34 VN35 VN36 VN38 VN39VN37
KHJ.TECHNOLOGY
E18
MAGICRAY
H19 H20
(WILLDONE)(SELEN)
NOVA WEIDY
TAIHENG
MORNSUN NTWKANETSU
(APELECTRONICS)
F10
YOUTEYUHAO
CHENGDONG
AIDACOM
F07
G01
JUKI
I14
WURTH
F08
F05 F06
SINMANT
UNICOMP
G26
F12
XUYENCO
SATO
K08aKNK
AEIS
FLEXITECH
(SK)
LORIOT
(AINUO)
TRUMPF
(HIGHFIVE)
YIKSHING
YOUCE
SKY
GAOQIANG
AERCHSKING-PAI
BOSUNGENG
(NEODEN)
(SUZHOUJUJIE)
(TIANLI)
GERI PAVILION
GA ROOMSERVER ROOM
lockable 2 Pcs
VIP
Lockable1 Pcs
Pre
Printer
COM
VIP
Group
WA
LK IN
- S
elf R
egis
tratio
n 8
Set
Self Pre-regisForm Filling
Counter
Printer
Printer
Printer
STAGE
Form FillingCounter
HOTTECH
SINIC-TEK
D SQUARED
L09VST
MTSC
PTSOLDER
VN40
JP23 JP16 JP09 JP04
VN16 VN11
JICA
(XINGCHEN)
K08bHEXAGON
M08 M09 M11 M12 M13
E02
(YONGMING)
EXIT
ZING EARSPSEMI
VN10 VN07
VN09 VN06
VN08 VN05 E19a
M15
TOPDYNAMIC
JP31
JP30
SUS VN
E03
WIT
(YOUCHANG)
SYSTECH
CEIEC
VINAPHAM
ELEMENT XT XING
DNIV
(RAYONINDUSTRIAL)
POLAR
(KLD)SEPNATONGYANG
YOU-SAN
CENTECH
D01
D11
SEBONG
MTR
- YUNPEN ELECTRONIC- MING CHIANG ENTERPRISE- TAI-TECH ADVANCED ELECTRONICS- K.S. TERMINALS
EMERGENCYEXIT
MAINENTRANCE
A01
B01
A03 A04 A05 A06 A07 A08 A09 A11
B02 B03
B04 B06
B05
B08
B07
B10
B09
B12
B11
B14
C01
C02
C03
C04
C05
C06 C08
P01 P02
REGISTRATIONAREA
MEETING ROOM
VIP LOUNGE
PAS
C07SHENMAORIVER
STONE
THAILAND PAVILIONOKUNO
AUROMEX S.E.C WIREFORM
HONG FA
(XULE)
CLEANERA
SEONGNAM CITY
B13
DAIICHI
R/S-VN
- TEEMA- JUNG SHING WIRE- YUNG CHAN METAL- LIPERENTERPRISE
(JIAHE)
(CHIPMALL) OSAKA KOBELCO
(DONGLI)
JETROINFO
JETROSECRETARIAT
ROOM
PANASONIC
PREC
RKENGINEERING
SHIOGAI
SSK
TAICO
TAMRON
TECHNOTAIYO
TSUCHIYA
VINA TAIYOSPRING
Y.H. SEIKO
HONDA
HASHIMA
HIROYUKI
HOKURIKU
IHI
ITSUWA
TOYOTA
PHAN LEBAO
SEIKIINNOVATIONS
SEIKICO
SHENGLI
SMARTVIETNAM
BUSINESSMATCHING AREA
CANON
AMON
AZUMANEJI
HAMADEN
DENSO
HAIPHUONG
HANOIINDUSTRYT&I
HUNGDUNG
ICHIVIETNAM
IDMEA
BINHMINH
VANLONG
ECOVIETNAM
VN03 VN01
VN04 VN02
3CENGINEERING
3HPLASTICS
THINHHUNG
TECHNO-KOM
TANPHAT
T&CVIETNAM
SUNPLA
TIGER
NODA
MINATORUBBER
MARUJYU
KTC
KOM
NIDEC-READ
MANU-TRONICS
MANHQUANG
KYODAI
KIM SEN
KIMLONG
JAT
INNOTEK
FOSTER
ENSHUSANKO
CURIOUS
CHUUBUKOUGYOU
BESTPLANT
BANDO
BROTHERINDUSTRIES
GAI PHONGRUBBER
FOSHAN
ECOTEK
BAC VIET
AN PHUVIET
VANXUAN
VIETAN
VIETAU
VIETCOMPETENCETECHNOLOGY
VIETUCVIET HA VN-J YAMA
GUCHI
VN41THUANTHANH
AI-PHONEDAIKIN ADVANEX
PRESSROOM
BUSINESSLOUNGE
G14
G11 G12
G09 G10
G07 G08ONE
SOFTDIGM
DKT
TOPRUN
APPLIEDPLASMA
PROTEM
UBTECK
KNL
JANGWONTECH
CHOICEPRO
HAND SOLDERINGCOMPETITION
CSCReed
TradexCESCOROGERS
STAFF ROOM
D14PROCHEMEVERWIDE
D17 D18
D15 D16CARTELL
LIONENTERPRISES
TEEIA
P03 P04
(R/S KS)
(CHENGDU)R/S-KP
INFORMATION6
VIETNAM - JAPAN - SUPPORTING INDUSTRIES EXHIBITIONBOOTH LAYOUT
HOKURIKU
IHI CURIOUS
ENSHUSANKO
FOSTERTOYOTA
ITSUWANODARKENGINEERING
SHIOGAI
SSK
TAICO
TAMRON
TECHNOTAIYO
TSUCHIYA
VINATAIYOSPRING
PREC
PANASONIC
TIGER
MINATORUBBER
CHUUBUKOUGYOU
AZUMANEJI
HIROYUKI
MARUJYU
Van LongPlastic
Binh MinhEcotekIchiViet Nam
Hung DungKim Sen
Kim Long
JAT
INNOTEK
HAMADEN
DENSO
HaiPhuong
Hanoi IndustryT & I
Kyodai
Thinh Hung
Manu-tronics
Giai PhongRubber
Foshan
Bac Viet
An PhuViet
3HPlastics
3CEngineering
Eco Viet Nam
Manh Quang
IDMEA
VIETNAMESE COMPANIES
JAPANESE COMPANIES
Viet Ha Viet Uc VN - J Yamaguchi Thuan Thanh
SmartViet Nam
Y.H.SEIKO
Van Xuan Viet An Viet AuViet CompetenceTechnology
ShengliTechno-kom
SeikikoTan Phat
Sunpla Phan LeBao
SeikiInnovations
T & CViet Nam
BROTHERMACHINERY
CANON
AIPHONEDAIKIN ADVANEX
NIDEC-READ
HONDA
HASHIMAKOM
KTC KTC
BANDO
AMON
VIETNAM - JAPAN - Supporting Industries Exhibition 7
Booth No
Organization
Page
Page
PageBooth No
JP 01 VN 01
JP 12 VN 10
JP 25 VN 24
JP 34 VN 41
JP 10 VN 05
JP 16 VN 20
JP 14 VN 14
JP 28 VN 28
JP 29 VN 35
JP 05 VN 03
JP 18 VN 18
JP 03
JP 27 VN 26
JP 36 VN 33
JP 09 VN 08
JP 21 VN 22
JP 07 VN 16
JP 31 VN 30
JP 38 VN 37
JP 40 VN 39
JP 02 VN 02
JP 13
JP 26 VN 25
JP 35 VN 06
JP 11 VN 07
JP 20 VN 21
JP 15 VN 15
JP 30 VN 29
JP 22 VN 36
JP 06 VN 04
JP 19 VN 19
JP 08 VN 13
JP 23 VN 27
JP 37 VN 34
JP 04 VN 09
JP 24 VN 23
JP 33 VN 32
JP 17 VN 17
JP 32 VN 31
JP 39 VN 38
VN 40
12 32
20 40
17 36
25 44
26 49
16 34
22 42
18 38
27 46
31
53
51
53
14 33
19 41
13
25 45
30 50
16 35
24 43
29 48
15 39
28 47
12 32
21 41
18
23 45
22 49
17 35
23 43
29 34
19 39
27 47
14 33
21 42
15 38
26 46
31 50
51
54
13 36
24 44
30 48
20 40
28 52
ADVANEX (VIETNAM)., LTD 3C ENGINEERING
HOKURIKU MACHINERY CLUB., JSC
KIM LONG PRODUCTION AND TRADING SERVICE CO., LTD
CURIOUS SEIKI VIETNAM CO., LTD
GIAI PHONG RUBBER CO., LTD
NIDEC-READ CORPORATION
SHENGLI VN CO., LTD
TOYOTA MOTOR VIET NAM CO., LTD
VIET AU ENGINEERING., JSC
BANDO MANUFACTURING (VIETNAM) CO., LTD BINH MINH TMC CO., LTD
KOM VIETNAM CO., LTD
MANUTRONICS VIETNAM., JSC
FOSTER ELECTRIC(BAC NINH) CO., LTD
ICHI VIETNAM SUPPORTING INDUSTRY., JSC
RK ENGINEERING CO., LTD
TAN PHAT AUTOMATION., JSC
BROTHER MACHINERY VIETNAM CO., LTD
VN-J PRECISION MECHANICS CORPORATION
AMON INDUSTRY CO., LTD AN PHU VIET PLASTICS CO., LTD
IHI CORPORATION
KYODAI MANUFACTURE., JSC
DENSO MANUFACTURING VIETNAM CO., LTD
VN 12 37HA NOI INDUSTRY TRADING INVESTMENT., JSC
PANASONIC VIETNAM CO., LTD
SUNPLA., JSC
VINA TAIYO SPRING CO., LTD
VIET HA CO., LTD
CANON VIETNAM CO., LTD
ECOTEK CO., LTD
MARUJYU VIETNAM CO., LTD
SEIKI INNOVATIONS VIETNAM CO., LTD
TECHNOTAIYO VIET NAM CO., LTD
VAN XUAN CO., LTD
HASHIMA VIETNAM CO., LTD
INNOTEK JSC
SSK (VIET NAM) CO., LTD
THINH HUNG CASTING CO., LTD
AIPHONE COMMUNICATIONS (VIETNAM) CO., LTD 3H PLASTICS JSC
HONDA VIETNAM COMPANY
KIM SEN INDUSTRIAL., JSC
DAIKIN AIR CONDITIONING (VIETNAM)., JSC
VN 11 37HAI PHUONG CO., LTD
NODA VIETNAM CO., LTD
SMART VIETNAM PRECISION MECHANICAL., JSC
TSUCHIYA TRADING VIETNAM CO., LTD
VIET COMPETENCE TECHNOLOGY., JSC
BESTPLANT CO., LTD ECO VIET NAM CO., LTD
KTC (HANOI) CO., LTD
PHAN LE BAO VIETNAM TECHNOLOGY CO., LTD
TAMRON OPTICAL(VIETNAM) CO., LTD
VAN LONG PLASTIC CO., LTD
HAMADEN VIETNAM CO., LTD
INDUSTRIAL MECHANICS AND AUTOMATION CO., LTD
SHIOGAI SEIKI VIETNAM CO., LTD
TECHNOKOM., JSC
AZUMANEJI CO., LTD BAC VIET TECHNOLOGY JSC
ITSUWA VIETNAM CO., LTD
MANH QUANG CO., LTD
ENSHU SANKO VIETNAM CO., LTD
HUNG DUNG CO., LTD
PREC VN CO., LTD
T & C VIETNAM CO., LTD
Y.H SEIKO VIETNAM., JSC
JAPAN INTERNATIONAL COOPERATION AGENCY (JICA ) JAPAN EXTERNAL TRADE ORGANIZATION (JETRO )
VIETNAM TRADE PROMOTION AGENCY (VIETRADE )
VIET UC INDUSTRIAL & COMMERCIAL., JSC
YAMAGUCHI VIETNAM., JSC
CHUUBU KOUGYOU VIETNAM CO., LTD
FOSHAN CERAMIC MACHINERY AND MOLD., JSC
MINATO RUBBER VIETNAM CO., LTD
SEIKICO PRECISION MECHANICAL CO., LTD
TIGER VIETNAM CO., LTD
VIET AN., JSC
HIROYUKI VIETNAM CO., LTD
JAT AUTOPARTS AND INDUSTRY EQUIPMENTS PRODUCTION., JSC
TAICO VIETNAM CO., LTD
THUAN THANH ENVIRONMENT., JSC
Company Name Company Name
JAPANESE COMPANY
ORGANIZATION
EXHIBITORS LISTVIETNAMESE COMPANY
INFORMATION8
COM
PANY
NAM
EBo
oth
No.
Page
JP 1
2
JP 1
3
JP 0
3
JP 0
8
JP 1
4
JP 1
5
JP 0
7
JP 1
7
JP 1
8
JP 1
9
JP 1
6
JP 2
1
Industrial Goods (Industrial machine / conveyance equipment)
Materials (Metal)
Jig / Equipment
Others
Assembling (Others)
Construction Equipment (Construction Materials, electric cables, doors, windows…)
Materials (Others)
Packing Materials / Secondary Materials
Assembling (Home electronics)
Plant Equipment (For Ship plant / Power plant / Large-scale plant)
Materials (Plastic, Rubber)
Assembling (Office Automation Equipment)
Assembling (4 wheels / 2 wheels)
Electronic/ Electrical Components/ Electric Control
Heat Treatment
Surface Treatment (electroplating, coating)
Forging
Casting
Canning / Welding
Sheet Metal (Precise)
Sheet Metal (Ordinary)
Machining (Precise)
Machining (Ordinary)
Rubber Injection Molding
Rubber Molding
Plastic Injection Molding
Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion)
Stamping Dies
Press
ENSH
U S
ANKO
VIE
TNAM
CO
., LT
D
FOST
ER E
LECT
RIC
(BAC
NIN
H) C
O.,
LTD
CHU
UBU
KO
UGY
OU
VIE
TNAM
CO
., LT
D
HAM
ADEN
VIE
TNAM
CO
., LT
D
CURI
OUS
SEI
KI V
IETN
AM C
O.,
LTD
HAS
HIM
A VI
ETN
AM C
O.,
LTD
DAIK
IN A
IR C
ONDI
TION
ING
(VIE
TNAM
)., JS
C
HIR
OYU
KI V
IETN
AM C
O.,
LTD
HO
NDA
VIE
TNAM
CO
MPA
NY
DEN
SO M
ANU
FACT
URI
NG
VIET
NAM
CO
., LT
D
HO
KURI
KU M
ACH
INER
Y CL
UB.
, JSC
ITSU
WA
VIET
NAM
CO
., LT
D
JAPA
NES
E CO
MPA
NY
CATE
GORY
FO
R PU
RCH
ASIN
G IT
EMS
12 2017 18 1913 15 211817 1915 20 22
JP 0
2AI
PHO
NE C
OM
MUN
ICAT
IONS
(V
IETN
AM) C
O.,
LTD
12
JP 0
1AD
VAN
EX (V
IETN
AM) L
TD
JP 0
6AZ
UM
ANEJ
I CO
., LT
D14
JP 2
0IH
I CO
RPO
RATI
ON
21
JP 1
0BA
NDO
MAN
UFAC
TURI
NG (V
IETN
AM)
CO.,
LTD
16
JP 1
1BE
STPL
ANT
CO.,
LTD
JP 0
4CA
NO
N V
IETN
AM C
O.,
LTD
13
JP 0
9BR
OTHE
R M
ACHI
NERY
VIE
TNAM
CO
., LT
D16
JP 0
5AM
ON
INDU
STRY
CO
., LT
D14
VIETNAM - JAPAN - Supporting Industries Exhibition 9
COM
PANY
NAM
EBo
oth
No.
Page
JP 2
4
JP 2
5
JP 2
6
JP 2
7
JP 2
3
JP 2
8
JP 3
0
JP 3
1
JP 3
2
JP 3
3
JP 3
4
JP 3
5
JP 3
6
JP 3
7
JP 2
9
JP 2
2
JP 3
8
JP 3
9
JP 4
0
Industrial Goods (Industrial machine / conveyance equipment)
Materials (Metal)
Jig / Equipment
Others
Assembling (Others)
Construction Equipment (Construction Materials, electric cables, doors, windows…)
Materials (Others)
Packing Materials / Secondary Materials
Assembling (Home electronics)
Plant Equipment (For Ship plant / Power plant / Large-scale plant)
Materials (Plastic, Rubber)
Assembling (Office Automation Equipment)
Assembling (4 wheels / 2 wheels)
Electronic/ Electrical Components/ Electric Control
Heat Treatment
Surface Treatment (electroplating, coating)
Forging
Casting
Canning / Welding
Sheet Metal (Precise)
Sheet Metal (Ordinary)
Machining (Precise)
Machining (Ordinary)
Rubber Injection Molding
Rubber Molding
Plastic Injection Molding
Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion)
Stamping Dies
Press
MIN
ATO
RU
BBER
VIE
TNAM
CO
., LT
D
PREC
VN
CO
., LT
D
TAIC
O V
IETN
AM C
O.,
LTD
TOYO
TA M
OTO
R VI
ET N
AM C
O.,
LTD
KTC
(HAN
OI)
CO.,
LTD
NO
DA V
IETN
AM C
O.,
LTD
SHIO
GAI S
EIKI
VIE
TNAM
CO
., LT
D
TECH
NO
TAIY
O V
IET
NAM
CO
., LT
D
VIN
A TA
IYO
SPR
ING
CO.,
LTD
Y.H S
EIKO
VIE
TNAM
., JS
C
KOM
VIE
TNAM
CO
., LT
D
NID
EC-R
EAD
CORP
ORA
TIO
N
RK E
NGI
NEE
RIN
G CO
., LT
D
TAM
RON
OPT
ICAL
(VIE
TNAM
)CO
., LT
D
TSU
CHIY
A TR
ADIN
G VI
ETN
AM C
O.,
LTD
MAR
UJYU
VIE
TNAM
CO
., LT
D
PAN
ASO
NIC
VIE
TNAM
CO
., LT
D
SSK
(VIE
T N
AM) C
O.,
LTD
TIGE
R VI
ETN
AM C
O.,
LTD
25 2627 3125 3024 292823 2223 292726 3124 3028
INFORMATION10
COM
PANY
NAM
E
3C E
NGI
NEE
RIN
G
ECO
TEK
CO.,
LTD
ICHI
VIE
TNAM
SUP
PORT
ING
INDU
STRY
., JS
C
3H P
LAST
ICS.
, JSC
FOSH
AN C
ERAM
IC M
ACH
INER
Y AN
D M
OLD
., JS
C
INDU
STRI
AL M
ECH
ANIC
S AN
D AU
TOM
ATIO
N C
O.,
LTD
(IDM
EA C
O.,
LTD)
AN P
HU
VIE
T PL
ASTI
CS C
O.,L
TD
GIAI
PH
ON
G RU
BBER
CO
., LT
D
INN
OTE
K., J
SC
BAC
VIET
TEC
HN
OLO
GY J
SC
JAT
AUTO
PART
S AN
D IN
DUST
RY
EQU
IPM
ENTS
PRO
DUCT
ION
., JS
C
BIN
H M
INH
TM
C CO
., LT
D
KIM
LO
NG
PRO
DUCT
ION
AN
D TR
ADIN
G SE
RVIC
E CO
., LT
D
KYO
DAI M
ANU
FACT
URE
., JS
C
ECO
VIE
T N
AM C
O.,
LTD
HU
NG
DUN
G CO
., LT
D
KIM
SEN
INDU
STRI
AL.,
JSC
MAN
H Q
UAN
G CO
., LT
D
MAN
UTR
ON
ICS
VIET
NAM
., JS
C
VIET
NAM
ESE
COM
PAN
YCA
TEGO
RY F
OR
SELL
ING
ITEM
S
HA
NO
I IN
DUST
RY T
RADI
NG
INVE
STM
ENT
JSC
HAI
PH
UO
NG
CO.,
LTD
Industrial Goods (Industrial machine / conveyance equipment)
Materials (Metal)
Jig / Equipment
Others
Assembling (Others)
Construction Equipment (Construction Materials, electric cables, doors, windows…)
Materials (Others)
Packing Materials / Secondary Materials
Assembling (Home electronics)
Plant Equipment (For Ship plant / Power plant / Large-scale plant)
Materials (Plastic, Rubber)
Assembling (Office Automation Equipment)
Assembling (4 wheels / 2 wheels)
Electronic/ Electrical Components/ Electric Control
Heat Treatment
Surface Treatment (electroplating, coating)
Forging
Casting
Canning / Welding
Sheet Metal (Precise)
Sheet Metal (Ordinary)
Machining (Precise)
Machining (Ordinary)
Rubber Injection Molding
Rubber Molding
Plastic Injection Molding
Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion)
Stamping Dies
Press
Page 32 32 33 33 34 35 35 36 36 38 38 39 39 40 40 413737
Boot
h N
o.
VN 0
1
VN 0
2
VN 0
3
VN 0
4
VN 0
5
VN 0
7
VN 0
8
VN 0
9
VN 1
0
VN 1
3
VN 1
4
VN 1
5
VN 1
6
VN 1
7
VN 1
8
VN 1
9
VN 1
2
VN 1
1
41 42 42
VN 2
0
VN 2
1
VN 2
2
VIETNAM - JAPAN - Supporting Industries Exhibition 11
SHEN
GLI V
N C
O.,
LTD
TAN
PH
AT A
UTO
MAT
ION
., JS
C
VAN
LO
NG
PLAS
TIC
CO.,
LTD
VIET
CO
MPE
TEN
CE T
ECH
NO
LOGY
., JS
C
SEIK
I IN
NO
VATI
ON
S VI
ETN
AM C
O.,
LTD
SUN
PLA.
, JSC
THIN
H H
UN
G CA
STIN
G CO
., LT
D
VIET
AN
., JS
C
VIET
UC
INDU
STRI
AL
& CO
MM
ERCI
AL.,
JSC
VN-J
PRE
CISI
ON
MEC
HAN
ICS
CORP
ORA
TIO
N
YAM
AGU
CHI V
IETN
AM.,
JSC
PHAN
LE
BAO
VIE
TNAM
TEC
HN
OLO
GY
CO.,
LTD
SMAR
T VI
ETN
AM P
RECI
SIO
N
MEC
HAN
ICAL
., JS
C
TECH
NO
KOM
., JS
C
VAN
XUA
N C
O.,
LTD
VIET
HA
CO.,
LTD
SEIK
ICO
PRE
CISI
ON
MEC
HAN
ICAL
CO
., LT
D
T &
C VI
ETN
AM C
O.,
LTD
THUA
N T
HAN
H E
NVI
RON
MEN
T., J
SC
VIET
AU
EN
GIN
EERI
NG.
, JSC
43 43 44 44 45 45 46 46 47 47 52 34 48 48 49 49 50 50 51 51
VN 2
3
VN 2
4
VN 2
5
VN 2
6
VN 2
7
VN 2
8
VN 2
9
VN 3
0
VN 3
1
VN 3
2
VN 4
1
VN 0
6
VN 3
3
VN 3
4
VN 3
5
VN 3
6
VN 3
7
VN 3
8
VN 3
9
VN 4
0
COM
PANY
NAM
EBo
oth
No.
Page
Industrial Goods (Industrial machine / conveyance equipment)
Materials (Metal)
Jig / Equipment
Others
Assembling (Others)
Construction Equipment (Construction Materials, electric cables, doors, windows…)
Materials (Others)
Packing Materials / Secondary Materials
Assembling (Home electronics)
Plant Equipment (For Ship plant / Power plant / Large-scale plant)
Materials (Plastic, Rubber)
Assembling (Office Automation Equipment)
Assembling (4 wheels / 2 wheels)
Electronic/ Electrical Components/ Electric Control
Heat Treatment
Surface Treatment (electroplating, coating)
Forging
Casting
Canning / Welding
Sheet Metal (Precise)
Sheet Metal (Ordinary)
Machining (Precise)
Machining (Ordinary)
Rubber Injection Molding
Rubber Molding
Plastic Injection Molding
Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion)
Stamping Dies
Press
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY12
Assembly on product
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
ADVANEX (VIETNAM) LTD
AIPHONE COMMUNICATIONS (VIETNAM) CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2006
2007
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
OA; others
Assembly on product
Assembly part
PCB
Metal , Plastic…
N/A
10,000
N/A
Material:
Material:
Product name:
Minimum lot: Use for: Assembly on product
Transformer
N/AN/A
Product name:
Minimum lot: Use for: Automotive
Surface treatment ( EDP)
SWC; SWP5,000
Material:
Material:
Product name:
Minimum lot:
Use for: Assembly on productSpeaker, ECM
N/AN/A
Product name:
Minimum lot: Use for: OA; Automotive….
Material for stamping part
SUS; SPCC; SPCD…100 Kg
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Office Automation; medical
Assembly on product
Nikel plating - Wire spring, flat spring
Wire harness, power cable, Coil cord
SWC; SWP
N/A
10,000
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
AutomotiveZn plating - Wire Spring
Die cut parts
SWC; SWP
LCD cover, Insulator, Rubber, Net
10,000
N/A
Material:
Material:
Mr. TRAN DUC KIEN
Mr. KEI NAKASHIMA
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
3,600
14,700
+84-220-354-5075
+84-27-4362-8031
MAIN CUSTOMERS:
MAIN CUSTOMERS:
CANON; DENSO;KYOCERA; NIDEC…
Aiphone Japan
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
90
250
General Manager
Purchasing Senior Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
1,830,000
18,080,000
+84-220-354-5076
+84-27-4362-8034
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001; ISO 14001
ISO 9001 : 2015
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lot F3, Phuc Dien IZ, Cam Giang District, Hai Duong Privince, Vietnam
No. 25, Street 6, VISP II, Hoa Phu Ward, Thu Dau Mot, Binh Duong Province
Lot F3,Phuc Dien IZ, Cam Giang District, Hai Duong Province, Vietnam
No. 25, Street 6, VISP II, Hoa Phu Ward, Thu Dau Mot, Binh Duong Province
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Precision Wire Spring, Flat Spring,,,
Others
www.advanex.com.vn
http://www.aiphone.net
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
23,248,880
JP 01
JP 02
Advanex (Vietnam) Ltd. (formerly known as Kato Spring Vietnam Ltd). a members of Advanex INC Japan ;started operation in Vietnam as a manufacture of precision coil spring, flat spring and stamping part (by the year 2017) .The company is also engaged in sub-assembly. the company is the market leader in the supply of presicion component in Vietnam.
Aiphone was established in 1948, and has been devoted to improving intercoms for half a century. The communication and security technology we have been cultivating for more than 60 years continues to expand, and is now used in many fields, in a variety of settings, such as the home, hospitals, care facilities and offices.
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY 13
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
DAIKIN AIR CONDITIONING (VIETNAM) JSC
CANON VIETNAM CO.,LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
1995
2001
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Injection Part
N/A
Injection Part
PWB
N/A
1/ 2/ 4 layers
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Sealing Material
Packing
Sealing Material
Carton box
N/A
3-4 layer with corrugating 4-6 color
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Foam
Packing
Foam
Manual
N/A
Paper woodfree 50-60/ 80/ 100/ 150 gsm
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Copper Assy
Machine size 200T - 650T
Copper Assy
Injection mold
N/A
PS/ PSHI/ ABS/ POM/ PBT/ PPE+PS
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Carton
injection machine size: 30T - 650T
Carton
Die maker & Design
N/A
N/A
N/A
N/A
Material:
Material:
Mr. WADA MAMORU
Mr. YOICHI KOSHIGUCHI
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
220,000
600,000
+84-22-1358-9250
+84-24-3881-2111
MAIN CUSTOMERS:
MAIN CUSTOMERS:
N/A
End users
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
600
23,200
General Manager
Assistant Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
82,500,000
306,700,000
N/A
+84-24-3881-1783
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
Plan in 2018
ISO 9001
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Plot Q1, Thang Long II Industrial Park, Phung Chi Kien Commune, My Hao District, Hung Yen Province
A-1, Thanglong Industrial Park, Dong Anh Dist., Hanoi, Vietnam
Plot Q1, Thang Long II Industrial Park, Phung Chi Kien Commune, My Hao District, Hung Yen Province
A-1, Thang Long Industrial Park, Kim Chuang Commune, Dong Anh Dist., Hanoi, Vietnam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Assembling (Others)
Assembling (Office Automation Equipment)
www.daikin.com.vn
www.canon-vn.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
19,000,000
Daikin Air Conditioning Vietnam was established in 1995, specializing in distributing air conditioning products. Daikin factory was built in 2016, specializing in manufacturing and assembling air conditions. Daikin Vietnam was listed in Top 500 Largest Vietnamese Enterprises and Top 100 Trusted Brand ranked by Vietnam Economy Times and Consumer Magazine in 2013.
Canon Vietnam Co., Ltd. is 100% Japanese capital company, specializing in scanner and printer production. With the purpose of brining customers more competitive products, as well as completing our commitment with Vietnam government in supporting industry contribution, we are making continuous efforts to expand purchasing parts made in Vietnam.
JP 03
JP 04
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY14
Press,Machining (Ordinary), Casting,Forging,Surface Treatment (electroplating, coating)
Automobiles
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
AMON INDUSTRY CO.,LTD
AZUMANEJI CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
1964
1961
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Lighting tree in the garden and the walls of the house
Chairs
Spot light
Springs
Alminium
SWOSC-V
300
6,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Changing Plug of automobile and motorcycle
Shelves
Car maintenance tool
Bookend
S45C,STKM13A,SS41B-D
SWA
1,000
3,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
To change the car audio unit
Chairs
Audio harness for car
Fastening Parts
SUS304
500
3,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Changing Tire of automobile and motorcycle
Shelves
Car maintenance tool
Brackets
Carbon tool steel (45C)
SPHC
1,000
5,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Safety check around the parking lot
Plastic convex mirror
Screw Parts
Plastic(acrylic)
SWCH10R
1,000
10,000
Material:
Material:
Mr. HIROFUMI OSAKI Mr. TAKAHASHI ATSUSHI
Mr. MAKOTO ATSUMI
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
N/A
1,000
+81-07-9022-6555
+81-3-3624-7447
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Car goods shop,home center,etc in JAPAN
Office Furniture, Automobiles, Constructions
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
109
30
General manager / Staff
General Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
830,000
12,500
+81-07-9022-2715
+81-3-3624-7470
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2008
ISO 9001 / 14001
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
N/A
2-10-1 Ishiwara, Sumida-ku, Tokyo, JAPAN
2077-1, Minaminawara, Fukusaki-town, Kanzaki-Dist, Hyogo-Pref, JAPAN
2-10-1 Ishiwara, Sumida-ku, Tokyo, JAPAN
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Plastic Molding / Press / Packing Materials
www.amon.co.jp/
http://www.azumaneji.co.jp/
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
30,000,000
10,000,000
Founded in 1964, we specialize in supplying the car goods for Japanese customers and has 6,000 selling areas at stores in the Japan. We are cooperating with many factories, and having inspection factory in China.We are also planing to cooperate with other factories in Vietnam and set up our inspection factory. Look forward to your cooperation in near future.
We are engaged in three lines of business related to metal parts. The first is to sell general or special fasteners. The second is to produce whole metal parts with domestic and foreign partners. The third is to provide customers with practical data on tightening derived from experiments.
JP 05
JP 06
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY 15
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
HAMADEN VIETNAM CO., LTD
DENSO MANUFACTURING VIETNAM CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2008
2001
Product name:
Minimum lot: Use for: VIC
Gear
N/A180,000
Material:
Product name:
Minimum lot: Use for: AT Module
Plug
A6061-T6600,000
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
N/A
Oil Valve Control
Brush
Bracket
N/A
SPCC
20pcs/Mo
50,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
N/A
Gasoline Valve
Bracket
Nozzle
N/A
N/A
2,500pcs/Mo
15,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
N/A
O2 Sensor
Core Stator
Stopper, Ring
N/A
SUS631 CPS
100,000pcs/Mo
220,000
Material:
Material:
Ms. PHAM THI MEN
Mr. DOAN TRUNG DUNG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
50,000
56,300
+84-221-358-9388
+84-24-3881-1608 (Ext: 3449)
MAIN CUSTOMERS:
MAIN CUSTOMERS:
N/A
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
2,242
3,648
Supervisor
PURCHASING Staff
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
25,000,000
N/A
+84-221-358-9518
+84-24-3959-0310
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO/TS16949 (May 2013), ISO14001 (Feb 2014)
ISO TS 16949, ISO 14000, OHSAS 18001
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Plot A4, Thang Long Industrial Park II, Yen My District, Hung Yen Province
Plot E-1, Thang Long Industrial Park, Dong Anh Dist, Hanoi, Vietnam
Plot No. A4, Thang Long Industrial Park II, Yen My District, Hung Yen Province
Plot E-1, Thang Long Industrial Park, Dong Anh Dist, Hanoi, Vietnam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Assembling (Others)
Assembling (4 wheels / 2 wheels)
hamadenvn.com
https://www.denso.com/vn/en/
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
N/A
Hamaden Vietnam is a companies who manufactures automobile parts. We actively contribute toward the sustainable development of society. Our doors will be open to the suppliers throughout the world as we pursue fairness in all business transactions. We will respect our suppliers as business partners, and aim for mutual growth based on mutual trust.
DENSO is a leading supplier of advanced automotive technology, systems and components for major automakers. As Export Processing Enterprise, we provide Automobile components for the customer all over the world. We’re looking for local supplier in Stamping, Die-Casting, Machining, Surface & Heat-Treatment,Plastic & Rubber commodities.
JP 07
JP 08
NO PHOTO
NO PHOTO
NO PHOTO
NO PHOTO
NO PHOTO
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY16
We have been a pioneer in the non-tire rubber and plastics industries
Cleaning Blade for Copying machine
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
BROTHER MACHINERY VIETNAM CO.,LTD
BANDO MANUFACTURING (VIETNAM) CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2013
2012
Product name:
Minimum lot:
Use for: Industrial sewing machine parts
Cam
Carbon steel, alloy steel, cast iron
200Material:
Product name:
Minimum lot:
Use for: Industrial sewing machine parts
Gear
Carbon steel, alloy steel, cast iron
200Material:
Product name:
Minimum lot:
Use for: Industrial sewing machine parts
Precision processed item
Carbon steel, alloy steel, cast iron
200Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Industrial sewing machine parts
Motor cycle
Metal ring
Roller weight
Carbon steel, alloy steel
Steel
4,000
100,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Industrial sewing machine parts
Metal shaft
Blade holder
Carbon steel
GX-BX
4,000
40,000
Material:
Material:
Mr. TRAN NAM TRUNG
Mr. NGUYEN QUANG DUONG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
25,000
6,720
+84-32-0354-5889
+84-221-397-4986
MAIN CUSTOMERS:
MAIN CUSTOMERS:
N/A
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
300
83
Section Manager
Production Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
41,000,000
2,000,000
N/A
+84-221-397-4911
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO9001
ISO14001(15th Mar 2015), ISO9001(15th Mar 2015)
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lot CN 2-4, Tan Truong Industrial Zone, Cam Giang Dist., Hai Duong
M-6 Plot, Thang Long II Industrial Park, Di Su Commune, My Hao Dist., Hung Yen Province, Vietnam
Lot CN 2-4, Tan Truong Industrial Zone, Cam Giang Dist., Hai Duong
M-6 Plot, Thang Long II Industrial Park, Di Su Commune, My Hao Dist., Hung Yen Province, Vietnam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Assembling (Others)
http://www.brother.com
www.bando-bmvn.com
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
N/A
We are a company which manufactures industrial sewing machines.We look for suppliers in the field such as iron shaft / gear/cam/ precision processed products.
Bando Vietnam shall commit No.1 Belt & Plastic parts supplier in Vietnam by meeting customer’s requirement and contribute to Bando Group.
JP 09
JP 10
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY 17
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
BESTPLANT CO., LTD
CHUUBU KOUGYOU VIETNAM CO.LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2014
2013
Product name:
Minimum lot: Use for: Automobile
S45C
N/A40,000
Material:
Product name:
Minimum lot: Use for: Motorcycle
C3604
N/A50,000
Material:
Product name:
Minimum lot: Use for: Automobile
A6061
N/A5,000
Material:
Product name:
Minimum lot: Use for: Automobile
SUM23
N/A200,000
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Domestic Waste water treatment tank
Automobile
Contact media
SUS303
PP
N/A
N/A
5,000
Material:
Material:
Mr. KATAOKA FUMIO
Mr. KENJI HOTTA
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
1,500
4,000
+84-24-6261-0499
+84-27-4222-0492
MAIN CUSTOMERS:
MAIN CUSTOMERS:
N/A
Confidentiality
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
N/A
21
General Director
N/A
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
685,000
500,000
+84-24-6261-3305
N/A
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
N/A
ISO9001
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Tan Quang industrial zone ,Tan Quang Commune, Van Lam District, Hung Yen Province
LotB-4B2-CN, NE5B&DE4 Road, MyPhuoc3 IZ, Ben Cat Town, Binh Duong Province, Vietnam
6th Floor - 23 Nguyen Van Cu Street, Ngoc Lam ward, Long Bien district, Hanoi
LotB-4B2-CN, NE5B&DE4 Road, MyPhuoc3 IZ, Ben Cat Town, Binh Duong Province, Vietnam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Others
Machining (Precise)
http://bestplantvn.com/
http://www.chk.co.jp/
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
720,000
Bestplant specializes in providing waste water treatment tanks with Japan technical criteria. With the compact design and the use of bio-filtration technology combined with patented backwash system in Japan, we ensure to provide the customer advanced products with high quality and reasonable prices in order to meet customer’s requirements.
Our company was founded in 2013. We are manufacturing metal precision parts for automobile and motorcycle, components of printers and copiers, and other related products.Production equipments are CNC automatic lathes.
JP 11
JP 12
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY18
Machining (Ordinary) ,Surface Treatment (electroplating, coating)
Plating material
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
CURIOUS SEIKI VIETNAM CO.,LTD
ENSHU SANKO VIETNAM CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2012
2011
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Auto Parts
Machining
Processing parts
Materials
SUS 303
N/A
20,000
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Auto Parts
Machining
Processing parts
Tools
SUYB
N/A
250,000
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Drilling
Plating Jig
Drill Regrindinh
Bar, Wire (Cu, SUS) materials
Tungsten Carbide
N/A
20
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Inner diameter finishReamer
Highly refined metals (Cu, Ni)
Tungsten Carbide
N/A
10
N/A
Material:
Material:
Mr. YAMAWAKI TATSUO
Mr. YAMAGISHI YOICHI
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
12,000
15,097
+84-22-2373-4995
+84-22-2395-2121
MAIN CUSTOMERS:
MAIN CUSTOMERS:
DENSO VN, HAMADEN VN
Auto parts, Motorcycle parts
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
80
80
N/A
General Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
8,000,000
3,500,000
+84-22-2373-4085
+84-22-2395-2123
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001 ISO 14000
ISO 9001
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lot 3, Ts25, Tien Son Industrial, Tu Son District, Bac Ninh, Viet Nam
H4-2, Que Vo IZ, Que Vo Dist., Bac Ninh
Lot 3, TS25, Tien Son Industrial, Tu Son District, Bac Ninh Province, Viet Nam
Lot H4-2, Que Vo IZ, Que Vo Dist., Bac Ninh
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Machining (Precise)
http://www.curius.co.jp/
www.esv.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
2,152,000
N/A
With procurement of processed parts, plating, heat treatment, tools, cutting tools, etc.
Enshu Sanko Vietnam Co.,Ltd. is established by Sanko Seisaku JSC & Ishii JSC, we started going to mass production in April 2012. We specialize in Surface treatment (plating) and Machining. We use up the technical know-how from our parent companies to bring the most satisfaction to you. If you need any support, please do not hesitate to contact us!
JP 13
JP 14
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY 19
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
FOSTER ELECTRIC(BAC NINH) CO., LTD
HONDA VIETNAM COMPANY
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2010
1996
Product name:
Minimum lot: Use for: N/A
General purchase
Chemical, Consumables, mechanical…
N/AMaterial:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Speaker
N/A
Cone paper
Raw material
Steel
Steel/ Aluminum /Resin
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Speaker
Plastic/ DC
Cord
Mold, Jig
N/A
N/A
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Speaker
N/A
Press part
Automobile parts
Steel, Iron , Aluminum
Steel/ Aluminum /Resin…
N/A
100
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Speaker
N/A
Injection parts
Motor Cycle parts
PP, ABS
Steel/ Aluminum /Resin…
N/A
100
Material:
Material:
Ms. DUONG THI HA
Mr. HA DANG LAM
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
34,000
N/A
+84-24-1376-5868
+84-2113-868-888
MAIN CUSTOMERS:
MAIN CUSTOMERS:
N/A
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
3,500
9,723
Assistant Manager
Purchasing Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
N/A
110,000,000
+84-24-1376-5870
+84-2113-868-909
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO -TS16949/ ISO 9001:2008 , ISO 14001:2004
ISO9001-2008, ISO 14000
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
No.1, street 11, VSIP Bac Ninh, Tu Son town, Bac Ninh province, VN
Phuc Thang, Phuc Yen town, Vinh Phuc
No.1, street 11, VSIP Bac Ninh, Tu Son town, Bac Ninh province, VN
Phuc Thang ward, Phuc Yen town, Vinh Phuc Province
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Speaker
Manufacturing and Assembling motorcycles & automobiles
http://www.foster.co.jp
www.honda.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
N/A
Located in Bac Ninh Province. Foster Electric Bac Ninh started to operate with 100% investment capital from Japan. Operating in the electronics industry, Foster Electric Bac Ninh expresses its strength in the manufacture of automotive speaker products.
Honda Vietnam Co., Ltd. was founded in 1996. After over 20 years of being in Vietnam, Honda Vietnam has developed and become one of the leading companies in the field of motorcycle production and automobile manufacturers in Vietnam.
JP 15
JP 16
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY20
Manufacturer of Packaging Items
All Industries
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
HASHIMA VIETNAM CO., LTD
HIROYUKI VIETNAM CO.,LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2014
2016
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Assembly
N/A
Silicon roller
Strapping tool
N/A
N/A
20
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Assembly
All Industries
Insulating Material
Packaging Machines
Owen corming
N/A
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Assembly
All Industries
Electric parts
PP Strapping Band
Taiwan Product
N/A
200
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Product of Assembly
All Industries
Panasonic inverterVF200-0042
PET Strapping Band
N/A
N/A
30 pcs/ month
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
AssemblyBlower motor
Stretch Film
N/A
N/A
10
N/A
Material:
Material:
Mr. LUYEN VAN THANH
Mr. NGO AN DINH
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
18,000
12,000
+84-16-7807-1831
+84-28-3756-2828
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Garment Factory
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
100
9
R&D Manager
General Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
1,500,000
N/A
+84-22-6355-5841
+84-28-3756-2814
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
N/A
ISO 9001:2008 , ISO 14001:2004
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Dong Van II IZ, Duy tien, Ha Nam
160, Jalan Murni 12Taman Perinsutrain Murui Senai , Johor 81400 Malaysia
Dong Van II IZ, Duy tien, Ha Nam
901 Kinh Duong Vuong Str., Quarter 1 An Lac Ward, Binh Tan Dist, HCMC, VN
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Manufacturing of machine
www.hashima.co.jp
www.hiroyuki-vietnam.com
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
8,000,000
N/A
We started running at the new premises this month. The factory is equipped with modern facilities like laser cutting machines, turning machine, welding machines, electrostatic powder coating machines etc. With Hashima’s experience for many years, Vietnamese young man power will produce high-quality machines from sheet metal working through painting process.
HIROYUKI VIETNAM CO., LTD was established in 2016. The world reader of packaging solution. Head Office is in Tokyo , factory is in Malaysia. That’s means High Quality , low Price.We believe we can help in your Logistics Quality Higher !
JP 17
JP 18
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY 21
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
HOKURIKU MACHINERY CLUB., JSC
IHI CORPORATION
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2008
1853
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Heat
N/A
Heater
Common Bed
N/A
N/A
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Heat insulation
N/A
Ceramic fiber blanket
Oil Seal
N/A
N/A
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Control The Furnace
N/A
Control panel
Defuser
N/A
N/A
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Measure the tempera-ture in the furnace
N/A
Thermocouple
Lube Oil Unit
N/A
N/A
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Construct The Furnace’s Wall
N/A
Fired Brick
Pressure Vessel
Al2O3
N/A
N/A
N/A
Material:
Material:
Mr. MORIMATSU KAZUHISA
Mr. HIROSHI TOEDA
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
500
N/A
+84-24-3525-1117
+84-28-3820-2117
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Yamaha, Enkei, Nissin Brake, Toyota
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
30
29,659
General manager
Chief Representative
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
30,000
1,071,000,000
+84-24-3525-1117
N/A
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
N/A
N/A
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Co Dien village, Hai Boi Commune, Dong Anh District, Hanoi city
7 Factories in Japan
Room 501,NoZa Building ,243 Cau Giay ,Dich Vong ,Cau Giay District, Ha Noi
Room 701, Citilight Tower, 45 Vo Thi Sau Street, Da Kao Ward, Ho Chi Minh
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Casting,Industrial Goods (Industrial machine / conveyance equipment), Others
Machining (Ordinary) ,Industrial Goods (Industrial machine / conveyance equipment) ,Plant Equipment (For Ship plant / Power plant / Large-scale plant)
http://www.hmc-c.com
http://www.ihi.co.jp
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
1,600,000
14,860,000,000
Our company specializes in fabrication, trading and reparing, maintenance the industrial furnaces (aluminum melting and holding furnaces, aluminum holding furnaces, heat-treatment furnaces…)
IHI Corporation contributes to development of society through advanced engineering capabilities.
JP 19
JP 20
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY22
Product name:
Minimum lot: Use for: Decorate inside car
Interior products
Resin3,000
Material:
Product name:
Minimum lot: Use for: Car’s assembly
Rubber products
Inserted metal rubber injection
1,500Material:
Assembling (4 wheels / 2 wheels)
Car’s body assembly
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
ITSUWA VIETNAM CO., LTD
TOYOTA MOTOR VIET NAM CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2009
1995
Product name:
Minimum lot: Use for: Grinding
Grinder Wheel
N/AN/A
Material:
Product name:
Minimum lot: Use for: Cutting/MC
Cutting Tool
N/AN/A
Material:
Product name:
Minimum lot: Use for: Welding
Welding Wire
N/AN/A
Material:
Product name:
Minimum lot: Use for: Cutting
Band Saw
N/AN/A
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
GrindingGrinding Paper
Press products
N/A
High tensile steel (higher than 590 Mpa)
N/A
1,500
Material:
Material:
Mr. TOMOOMI KAWAI
Mr. HOANG VAN CAU
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
N/A
210,000
N/A
+84-21-1386-8100
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Panasonic, Nidec, Honda, Yamaha
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
22
1,900
Senior Manager
Deputy General Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
100,000
89,600,000
N/A
+84-21-1386-8117
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
N/A
N/A
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
N/A
Phuc Thang, Phuc Yen , Vinh Phuc
9th Floor., ICON4 Building, 243A De La Thanh, Lang Thuong Ward, Dong Da District, Ha Noi City
Phuc Thang, Phuc Yen , Vinh Phuc
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Plastic Injection Molding, Machining (Precise), Assembling (Home electronics), Materials (Metal), Jig / Equipment
http://itsuwa.vn/
toyotavn.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
N/A
Itsuwa Vietnam is a trading company. Products is Consumable item like Grinding wheel, Chemical (Coolant, Detergent, Anti Rust) EDM Wire, Finger cot, Soldier tip etc. We are seeking for potential products in Vietnam and export to abroad. Like Grinding Paper, Welding Wire, Cutting Tool, Fabric, Clean room product, Press/Shaft Parts, Cutting sheet etc.
Toyota Motor Vietnam (TMV) is one of the first automobile maker in Vietnam . TMV never stop making efforts to be “Moving Forward” together with Vietnam. TMV has been incessantly providing high quality products and perfect customer services to bring the highest satisfaction to customers as well as contribute to the development of the Vietnamese automobile industry.
JP 21
JP 22
Product name:
Minimum lot: Use for: Car assembly
Air intake product
PE-HD1,500
Material:
Product name:
Minimum lot: Use for: Heat resistant
Interior product
Non woven fabric1,500
Material:
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY 23
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
NIDEC-READ CORPORATION
KOM VIETNAM CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
1991
2011
Product name:
Minimum lot: Use for: Jig
AL Base
AlminiumN/A
Material:
Product name:
Minimum lot:
Use for: JigSolder wiring
SolderN/A
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Jig
Metal parts
Wire/Spring Probe
Surface treatment
Metal
Metal
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Jig
Metal parts
Engineering plastic/Machinable Ceramics
Gear Machining
plastic/ceramics
Metal
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Jig
Metal parts
Fixture
Material(Sus, Aluminium, Steel, Brass)
Composite
N/A
N/A
N/A
Material:
Material:
Mr. NAOKI TOHTANI
Mr. TSUYOSHI IWASAKI
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
N/A
960
+81-75-315-5632
+84-24-3959-0292
MAIN CUSTOMERS:
MAIN CUSTOMERS:
semiconductor industry,printed-circuit board industry
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
690
45
N/A
General Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
8,300,000
550,000
N/A
+84-24-3959-0294
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO9001
N/A
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
10 Tsutsumisoto-cho, Nishikyogoku, Ukyo-ku, Kyoto, Japan
Plot 17B, Quang Minh Industrial Zone, Me Linh Dist, Hanoi, Vietnam
10 Tsutsumisoto-cho, Nishikyogoku, Ukyo-ku, Kyoto, Japan
Plot 17B, Quang Minh Industrial Zone, Me Linh Dist, Hanoi, Vietnam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Electronic / Electrical Components / Electric Control,Jig / Equipment
Lathe & Milling
https://www.nidec-read.com/
http://fact-link.com.vn/mem_profile.php?id=00001166&page=00001613&lang=jp
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
140,000,000
N/A
1. Semiconductor Package Inspection Systems 2. Printed Circuit Board Inspection Systems 3. Inspection Fixtures 4. Optical Vision Inspection Systems 5. Flat Panel Display Inspection Systems 6. Automatic Measurement Equipment, Specific Application Machines Development/ design, manufacturing, and sales of software/ hardware relating to the products above .
We suplly metal and raisin CNC machining parts.
JP 23
JP 24
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY24
Press, Sheet Metal (Ordinary), Sheet Metal (Precise), Canning / Welding, Assembling (Others), Materials (Metal), Jig / Equipment
Sheet metal processing
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
KTC (HANOI) CO.,LTD
MARUJYU VIETNAM CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2004
2014
Product name:
Minimum lot: Use for: Machine parts
Precision sheet metal work sample
SS400/SPHC/SECC/SUS/Al/C
1Material:
Product name:
Minimum lot: Use for: Machine parts
Precision sheet metal work sample
SS400/SPHC/SECC/SUS/Al/C
1Material:
Product name:
Minimum lot: Use for: Machine parts
Precision sheet metal work sample
SS400/SPHC/SECC/SUS/Al/C
1Material:
Product name:
Minimum lot: Use for: Sheet metal processing
Sus Hairline Finish Stainless Steel Sheet
Stainless steel 304/430N/A
Material:
Product name:
Minimum lot: Use for:
SUS304-No.1 t9.0
Stainless steelN/A
Material:
Ms. TRAN THI DUNG
Mr. UTSUMI YOSUKE
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
12,500
2,500
+84-22-1379-1565
+84-22-6358-3500
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Canon, Brother
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
250
15
General Manager (Control Division)
Deputy Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
3,400,000
2,100,000
+84-22-1379-1573
+84-22-6358-3502
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2004; ISO 14001:2004
N/A
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Tan Quang Commune, Van Lam District, Hung Yen
Dong Van II industrial zone, Dong Van town, Duy Tien ward, Ha Nam province
Tan Quang Commune, Van Lam District, Hung Yen
Dong Van II industrial zone, Dong Van town, Duy Tien ward, Ha Nam province
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Assembly (Office Automation Equipments); Rubber pressing & rolling
N/A
http://www.mjv.com.vn/
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
8,000,000
N/A
KTC (Hanoi) is a Japanese manufacturer in various rubber parts for 4-wheel and 2-wheel vehicles; rubber parts for industry in which office automation (OA) rubber roller is the key product. Beside providing rubbers parts to customers, we also assemblyequipments using rubber parts for them.
We can provide Precision Sheet Metal products that satisfy one’s customers’ needs with the know-how cultivated over 80 years at the head factory in Japan. The Vietnamese cost and the Japanese quality pro-duce an excellent cost performance of “Low cost * High added value” in Vietnam.
JP 25
JP 26
Product name:
Minimum lot:
Use for: Rubber part production
Rubber (EPDM, NBR, SILICON, FKM,...)
Rubber10
Material:
Product name:
Minimum lot: Use for: Assembly
Oa Roller Iron Shaft
Iron1,000
Material:
Product name:
Minimum lot:
Use for: Rubber mixing for pressing
Chemicals
Chemical10
Material:
Product name:
Minimum lot: Use for: Assembly
Metal products (Jig, spring, chuck...)
Metal100
Material:
Product name:
Minimum lot: Use for: Assembly
OA ROLLER PLASTIC SHAFT
plastic1,000
Material:
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY 25
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
MINATO RUBBER VIETNAM CO., LTD
NODA VIETNAM CO.,LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2013
2011
Product name:
Minimum lot: Use for: Chrome die
Surface polishing solution
N/A1
Material:
Product name:
Minimum lot: Use for: Chrome Die
Sus Plate/Sk Plate
Sus,Sk1
Material:
Product name:
Minimum lot: Use for: Thomson-based
Resin Plate
PC,PET,PVC1
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Manufature rubber product
Thomson-base
Mold
Plywood
N/A
Basewood
N/A
1
Material:
Material:
Mr. LUONG HA NAM
Mr. TOSHIAKI KOJIMA
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
1,020
1,000
+84-22-6626-2155
+84-24-3959-0240
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Japan, Thailand, Vietnam
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
22
60
General Director
Managing Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
20,000
100,000
N/A
+84-24-3959-0238
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
N/A
N/A
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Dong Van II IZ, Dong Van Town, Duy Tien District, Ha Nam Province
N/A
Dong Van II IZ, Dong Van Town, Duy Tien District, Ha Nam Province
Unit27,Plot N-1A,Thang Long Industrial Park Dong Anh district
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Rubber Molding,Materials (Plastic, Rubber)
Stamping Dies,Jig / Equipment/Thom-son-die Chrom-die
minato-g.co.jp
http://www.kigataya.com
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
35,000
1,500,000
Minato Rubber Viet Nam Co.,Ltd (“MRV”) is a sub-sisdary which 100% FDI invested by Minato Rubber Co.,Ltd. from Japan.We major in manufacturing rubber parts in automo-bile brake, cushion parts in construction, technical packing in FA machine, ect...Our headquarter in Japan also manufactures plastic parts used in pad of FA machine and automobile.
Manufacture and sale of Thomson die and etching die (chrome die).
JP 27
JP 28
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY26
Electronic component: electrical appliances, factory automation, information/communications housing equipment
Door camera
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
TIGER VIETNAM CO.,LTD
PANASONIC VIETNAM CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2011
2005
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Rice cooker
Washing machine
Heater
Window
Aluminum
Temperred Glass
5,000
500
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Rice cooker
Washing machine
Silicon packing
Feeding vale
Silicon rubber
N/A
5,000
2,600
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Rice cooker
Speaker
Electronic substrate
Frame
Electronic material
AS-4133L, SUS301, Ni, Au
5,000
5,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Rice cooker
Refrigerator
Meiban
Tube drain BL267
Plastic
HDPE 5502
5,000
40,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Rice cooker
Inner Pot For Rice Cooker
Panel
Aluminum
plastic, painting process
5,000
5,000
Material:
Material:
Mr. LE VAN SAU
Ms. HOANG THU THUY
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
33,100
N/A
+84-25-1887-7232
+84-24-3955-0111
MAIN CUSTOMERS:
MAIN CUSTOMERS:
TIGER CORPORATION
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
212
131
Product Development Manager
Manager of Global Procurement Division
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
16,000,000
243,000,000
+84-25-1887-7238
+84-24-3955-0144
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2015
N/A
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Plot 229, Amata Road, Amata Industrial Park, Long Bình Ward, Bien Hoa City, Dong Nai Province, Vietnam
Plot J1 - J2, Thang Long Industrial Park, Dong Anh District, Hanoi
Plot 229, Amata Road, Amata Industrial Park, Long Bình Ward, Bien Hoa City, Dong Nai Province, Vietnam
Plot J1 - J2, Thang Long Industrial Park, Dong Anh District, Hanoi
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Assembling (Home electronics)
https://tiger-vn.com
http://www.panasonic.com/
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
5,500,000
N/A
TIGER VIETNAM CO., LTD. is a company with 100% Japanese investment capital, specialize in manufacturing the Japan top household electronic. With advanced technology has been summed up for more than 90 years in Japan. We expect to develop and expand the market through products were assembled in Vietnam with Japan quality and technical.
Panasonic Vietnam Group comprises of seven com-panies, five of which are manufacturing companiesPIDVN, PSNV, PAPVN, PAVCV and PESVN. Panasonic Vietnam (PV) is the holding company which supports Panasonic Vietnam Group. We are searching local suppliers.
JP 29
JP 30
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY 27
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
PREC VN CO.,LTD
RK ENGINEERING CO.,LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2008
2011
Product name:
Minimum lot:
Use for: Water supplyPart 2
PE3,000
Material:
Product name:
Minimum lot: Use for: Water supply
Part 1
PE3,000
Material:
Product name:
Minimum lot:
Use for: Electric wiringConnector fixing base
Brass1,000
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Water supply
Tank
Cap2
Bolt Nut
Brass
Steel Stainless
10,000
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Water supply
Ttank
Cap
Machining
Brass
Steel,Stainless
10,000
N/A
Material:
Material:
Mr. ONO HIROKI
Mr. HIDENOBU TOMURA
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
9,000
5,300
+84-21-1359-3939/ +84-944-002-169
+84-22-5326-0715
MAIN CUSTOMERS:
MAIN CUSTOMERS:
A large Japanese company, PrecJP (Head office)
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
60
93
General Director
General Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
1,200,000
600,000
+84-21-1359-3838
+84-22-5326-0719
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2008
ISO 9001:2015/ JIS Q 9001:2015 ASME Section I (S) ASME Section Div. I (U)
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Binh Xuyen industrial zone, Vinh Phuc province
CN3.2K, Dinh Vu Industrial Zone, Dong Hai 2 Ward, Hai An Dist.,Hai Phong
Binh Xuyen industrial zone, Vinh Phuc province
CN3.2K, Dinh Vu Industrial Zone, Dong Hai 2 Ward, Hai An Dist., Hai Phong
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Precision parts processing / Heat treatment
Press,Canning / Welding,Heat Treat-ment,Plant Equipment (For Ship plant / Power plant / Large-scale plant),Others
www.v-prec.co.jp
http://www.nkweb.co.jp/rk_engineering/
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
1,600,000
2,300,000
PREC VN, formed in 2007 in Vinh Phuc, is machining manufacturer specializing in precision parts pro-cessing. We construct quality and cost superiority through consistent in-house production from materi-als to processing and heat treatment by Japan’s high technology. We do not simply create products, we put our responsibility and creativity in each product to deliver it to the customer.
RK engineering is producing in and sales various tanks, head plate. Also available to design various tanks and heat treatment by convection type car bottom furnace. Acquiring ASME certificate, RK is now contributing to facility manufacturing of power generation, chemical and food industries in Japan and southeast Asia.
JP 31
JP 32
NO PHOTO
NO PHOTO
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY28
Press/ Electronic / Electrical Components / Materials (Plastic, Rubber),Packing Materials / Secondary Materials
For Vacuum tray, Insulation film
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
SHIOGAI SEIKI VIETNAM CO.,LTD
SSK (VIET NAM) CO.,LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2004
2006
Product name:
Minimum lot:
Use for: Mothproofing item for factory
Sheet shutter
N/AN/A
Material:
Product name:
Minimum lot:
Use for: Mothproofing item for factory
Rat guard, Vinyl Cur-tain(PVC sheet)
PVC,OtherN/A
Material:
Product name:
Minimum lot: Use for: Packing materials
Foam material, Bubble sheets
PE,OtherN/A
Material:
Product name:
Product name:
Product name:
Product name:
Product name:
Minimum lot:
Minimum lot:
Minimum lot:
Minimum lot:
Minimum lot:
Use for:
Use for:
Use for:
Use for:
Use for:
Outstanding Processing
Outstanding Processing
Outstanding Processing
Outstanding Processing
For Electronic parts, Floor line tape
SUS / Stainless Steel
AL/ Aluminum
CU / Copper
Casting
Adhesive tape
SUS303, SUS304, SUS440, SUS316
A2017, A6063, A5052, A7075
Pure Copper, Mixing copper
Cast iron
N/A
N/A
N/A
N/A
N/A
N/A
Material:
Material:
Material:
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Outstanding Processing
SS / Structural Steel
Plastic sheet, Plastic film
SC , SK
PET,PS,PC,Other
N/A
N/A
Material:
Material:
Mr. OGAWA HIDEKI
Mr. AMANO KOTARO
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
10,220.74
4,200
+84-251-393-6450 ~ 6453
+84-22-0354-5991
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Machining (Ordinary) ,Machining (Precise),Sheet Metal (Ordinary),Sheet Metal (Precise),Assembling (Others)
Brother,Noble,Meiko,Synztec,Hitachi Cable,Honda Lock...
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
200
80
Vice- President
General Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
3,000,000
2,000,000
+84-251-393-6454
+84-22-0354-5946
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2015
ISO 9001, ISO 14001
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Plot 224/4, Road 24-2, Amata Industrial Zone, Long Binh Ward, Bien Hoa City, Dong Nai Province, Vietnam
D1-Phuc Dien Industrial Zone, Cam Giang District, Hai Duong Province, Viet Nam
Plot 224/4, Road 24-2, Amata Industrial Zone, Long Binh Ward, Bien Hoa City, Dong Nai Province, Vietnam
D1-Phuc Dien Industrial Zone, Cam Giang District, Hai Duong Province, Viet Nam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Tokyo Weld Co.,Ltd. ; Ricoh Co., Ltd. ; SHIOGAI SEIKI Co., Ltd.
http://www.shiogaiseikivietnam.com/
www.ftcj.co.jp/_en/network/sskv.html
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
1,220,000
Our Philosophy:Every company says, “The customer is first,” and “Protect the environment,” but we consider these to be inherent corporate responsibilities.We strive toward the motto “Number one and only one” to satisfy the needs of our customers around the world with our core strength such as high quality, low cost, quick delivery, customer care and accepting orders of any size.
SSK(VIET NAM) CO., LTD. is a tape and film processing factory located in Hai Duong, Vietnam.As the major features of us, we have press machines and rotary cutters. We are processing and ultra-precision of tape and film for electronic parts.And, we have vacuum molding machines. We are manufacturing and selling transport tray of precision parts.
JP 33
JP 34
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY 29
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
TAICO VIETNAM CO.,LTD
TAMRON OPTICAL (VIETNAM) CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2012
2012
Product name:
Minimum lot: Use for: Furniture
Plastic legs
ABS 20,000
Material:
Product name:
Minimum lot: Use for: Furniture
Plastic Legs (Wood Pattern)
ABS5,000
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Gas range
Photographic and Optical component
Burner
Optical components
Cast iron
N/A
100
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Gas range
Photographic and Opti-cal component
Trivet
Commercial/ industrial use optics
Cast iron
N/A
100
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Cooking
Photographic and Optical component
Aluminum casting pan
Photographic lenses
Aluminum
N/A
200
1
Material:
Material:
Mr. YUTAKA INOUE
Mr. DUONG QUANG SON
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
N/A
18,000
+84-24-3783-5618
+84-169-310-7896
MAIN CUSTOMERS:
MAIN CUSTOMERS:
TAICO JP, TOHO Precision Vietnam,Hashima Vietnam,Denyo Vietnam
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
7
850
General Director
Assistant Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
200,000
14,000,000
N/A
N/A
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
N/A
IS0 9001 : 2008
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
N/A
Plot No.69B & 70A, Noibai industrial Zone Maidinh Commune, Socson District, Hanoi
140 Vu Pham Ham Street, Yen Hoa Ward, Cau Giay District, Hanoi
Plot No.69B & 70A, Noibai industrial Zone Maidinh Commune, Socson District, Hanoi
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
N/A
Photographic lenses/Optical components / Commercial / industrial use optics
www.fact-link.com.vn/home/taico-vn
N/A
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
38,934,259
Our main business is exporting various parts and products to Japan.We hope to co-operate with Viet-nam companies and foreign companies.
Tamron is a Japanese 50-year-old firm centralizing in manufacturing lenses and optical parts. Tamron applied sophisticated technology fostered for overs the years to produce optical products to serve for diversified industries such as electronics, security,…Considering customers’ satisfaction as foundation base for business activities, Tamron is committed to taking new challenge in high tech field.
JP 35
JP 36
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY30
Others
Coating
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
TECHNOTAIYO VIET NAM CO.,LTD
TSUCHIYA TRADING VIETNAM CO.,LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2015
2014
Product name:
Minimum lot:
Use for: Intrabay Transportation
Coaster
N/AN/A
Material:
Product name:
Minimum lot: Use for: Surface Treatment
Abrasive
N/AN/A
Material:
Product name:
Product name:
Product name:
Product name:
Minimum lot:
Minimum lot:
Minimum lot:
Minimum lot:
Use for:
Use for:
Use for:
Use for:
Kitchen Equipment
Damper Equipment
Windamper
Masking
Basket
Cut parts
Mounting hardware
Die cutting items
Stainless
C3604,S45C
SPCC
PVC, PP, PET
50
N/A
2,000
N/A
Material:
Material:
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Measuring equip-ment,Industrial equipment
Cut parts
Chemical Products
Aluminum,Steel
N/A
N/A
N/A
Material:
Material:
Mr. LE VAN LOI
Mr. YUSUKE AKIYAMA
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
N/A
N/A
+84-24-3655-9559
+84-24-3941-3077
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Machining (Precise)/ Machining (Ordi-nary)/ Press/ Surface Treatment(electroplating, coating)/ Forging/ Casting/ Sheet Metal (Ordinary)/Sheet Metal (Precise)
Auto Motive / Printer / Building material / Industry
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
4
3
Leader
G.M
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
50,000
500,000
+84-24-3655-9559
+84-24-3941-2991
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
N/A
N/A
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
N/A
N/A
No.29,Ngo 209,An Duong Vuong,Tay Ho
Suite no.2140, HIMLAM BUSINESS CENTER, 21st Floor, Capital Tower,109 Tran Hung Dao str., Hoan Kiem dist, Ha Noi
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Via TECHNOTAIYO,each leading manufacturer of Japan
http://www.techno-t.co.jp/vietnamese/
http://www.tsuchiya-group.co.jp
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
N/A
Our company was established in july 2015. We formerly were a representative office in September 2013 with 100% investment of TECHNO TAIYO CO.,LTD from Sakai city,Japan. we have established an office in Hanoi and had our private processing machines installed in each alliance factory which is directed under the technical guidance and management of Japanese engineers.
We handle tens of thousands of products with our comprehensive expertise and networks.To answer all our customers needs,not only do we supply ex-isting products,we also manage the creation of new products and provide quality control,quality assur-ance,and processing service.
JP 37
JP 38
VIETNAM - JAPAN
- Supporting industries exhibition
JAPANESE COMPANY 31
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
VINA TAIYO SPRING CO.,LTD
Y.H SEIKO VIETNAM, JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
PURCHASING ITEMS
PURCHASING ITEMS
2007
2011
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Stamping & forming machine
Car’s Part
Machine oil
Insulator CP Turn
Oil
N/A
1000 litter
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Making mold
Car’s Part
Tooling material
Housing Connector Male
SS400, SKD…
N/A
As Order
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Making stamping mold
Car’s Part
Tooling spare part
Body
SKD,…..
N/A
As Order
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Stamping part
Car’s Part
Mental material
Housing Connector Male
SPCC, SUS, PK, Cu….
N/A
100kg
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Packing part
Make up Product
Box, tray packing
Hinji Cap
Plastic, carton
N/A
1000
N/A
Material:
Material:
Ms. NGUYEN THI HOI
Mr. KAZUO YOSHINAKA
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
15,000
500
+84-24-3394-0671
+84-24-3959-0250
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Denso group, Honda group, Yamaha group...
Hamaden VN, Daiwa Plastics Thang Long, VietNam Toyo Denso, Kuroda Kakaku VN, SEWS-CV, SEPV, ....
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
350
30
Chief of sale
General Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
7,000,000
3,560,000
+84-24-3394-0674
+84-24-3959-0251
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001 and ISO 14001
N/A
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lot CN4-4, Thach That - Quoc Oai IZ, Ha Noi, Viet Nam
Unit 6, Plot N-1, Thang Long I.P, Dong Anh, Ha Noi
Lot CN4-4, Thach That - Quoc Oai IZ, Ha Noi, Viet Nam
Unit 6, Plot N-1, Thang Long I.P, Dong Anh, Ha Noi
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Press,Stamping Dies,Sheet Metal (Precise),Surface Treatment (electroplating, coating),Heat Treatment
Plastic Injection Molding,Machining (Precise),Casting
http://vinataiyo-spring.com/?lang=en
http://yh-seiko.com.vn/
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
7,000,000
850,000
Vina Taiyo is FDI company with 100% investment from Japan. Our product is leaf spring, plate spring, clamp and clip, snap ring....and other metal part. We are proud of being leader in stamping, multi-form-ing, heat treatment and surface treatment (magni coating, photphase) in Vietnam as well as in over the world.
Y.H Seiko Vietnam JSC with high-tech equipment such as CNC milling machine centers, CAD, CAM 3D, will bring the products with the highest precision.Certificated as the first hi-tech product support proj-ect in Vietnam.
JP 39
JP 40
VIETNAMESE COMPANY32
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
3C ENGINEERING
3H PLASTICS JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
1999
2010
Product name:
Minimum lot:
Use for: local and oversea customers
Other sheet metal fabrication
SPHC, SPCC, ZAM, Stainless, Al, Cu
N/AMaterial:
Product name:
Minimum lot: Use for: Motorcycle
Switch lamp Cover
PA6,GF30%50,000
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Data Center
Yamaha motorcycle
Rack cabinet
Head lamp switch signal
SPHC, SPCC, ZAM
POM
N/A
50,000
Material:
Material:
Product name:
Minimum lot:
Use for: MV switchboard for sub-station, factory
Schneider - Nex
SPHC, SPCC, ZAMN/A
Material:
Product name:
Minimum lot:
Use for: LV switchboard for building, factory, offshore
Siemens - Sivacon S8, 8PT
SPHC, SPCC, ZAMN/A
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Wind Energy
Motocycle
Sheet metal fabrication
Injection mould
SPHC, SPCC, ZAM
NAK80, P60
N/A
1
Material:
Material:
Mr. DANG QUOC SON
Mr. HOANG VAN HUONG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
7,000
1,200
+84-9-1140-1168
+84-24-2217-2778
MAIN CUSTOMERS:
MAIN CUSTOMERS:
General Electric (GE) Haiphong; Kinden; Yurtec; Kandenko; Takasago Vietnam; Swing water ...
Japan, India, Australia
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
129
50
Vice Director
Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
1,500,000
82,000
+84-24-3664-0625
N/A
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2015; TCVN 7994-1:2009 (IEC 61439-1:2005); IEC 62271-200:2003
ISO 9001-2008
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
TS17, Tien Son IZ, Dong Nguyen, Tu Son, Bac Ninh, Vietnam
Lot 29A, Quang Minh Industrial Zone, Me Linh Dist, Ha Noi City
27/216 Dinh Cong, Hoang Mai, Hanoi, Vietnam
5/118 Cau Giay, Quan Hoa Commune, Ha Noi City
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
All the machines at ours factories used the newest technology from EU, Japan
Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion),Plastic Injection Molding
www.3cengineering.com.vn
www.3hgo.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
3,294,000
800,000
3C Engineering established in 1999 as the first Electrical switchboard maker in Vietnam. With our high quality machines and our experience in the industry, we offer comprehensive solutions for Electrical switchboard up-to 24kV and Sheet metal fabrication service for Vietnam’s market as well as international exporting.
3H Plastic., JSC is one of the leading manufacturers specializing in processing Precision Moulding and producing Plastic Products in Vietnam. Our products are produced from original plastic and comply with the safety standards of International Technical Standards as ROHS, ASTM, EN71, ST2002...
VN 01
VN 02
Product name:
Minimum lot: Use for: Educational Toys
Smart Ball Set
ABS10,000
Material:
Product name:
Minimum lot: Use for: Yamaha motorcycle
Head lamp switch signal Head lamp switch signal
POM50,000
Material:
VIETNAMESE COMPANY 33
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
AN PHU VIET PLASTICS CO.,LTD
BAC VIET TECHNOLOGY JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2011
2008
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Plastic safe
Packaging
Medical equipment
Steel box (I_tainer)
PP J560
Steel
100,000
100
Material:
Material:
Product name:
Minimum lot: Use for: Plastic Mold Machine
Plastic Mold
SkD61-52HRC, S-star - 52HRC, PD613-60HRC
1Material:
Product name:
Minimum lot: Use for: Sewing machine
Sewing Machine Parts
Plastics100,000
Material:
Product name:
Minimum lot:
Use for: Mobifone, phone charger, phone case..
Hand Phone Parts
Plastics100,000
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Motorcyle
Injection Molding
Motorcycle parts
Injection Mold
Plastics
Steel (NAK, SKD 61…)
100,000
1
Material:
Material:
Mr. NGUYEN VAN HUNG
Mr. VU HUU THANG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
6,141
32,183
+84-22-1375-1336
+84-22-2361-7933
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Samsung, Panasonic, Honda, Fami, Heiwa
Canon, Samsung, Muto, Kyocera
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
300
250
General Director
Vice director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
1,000,000
5,511,363
+84-22-1375-1335
+84-22-2361-7932
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001-2008 & ISO 14001: 2004
ISO 9001:2015; ISO 14001:2015
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Km30+100, highway No.5 Bach Sam commune, My Hao district, Hung Yen province, Viet Nam
Km 7, Highway 18, Phuong Lieu commune Que Vo Industrial Zone, Bac Ninh, Vietnam
Km30+100, highway No.5, Bach Sam commune, My Hao district, Hung Yen province, Viet Nam
Km 7, Highway 18, Phuong Lieu communeQue Vo Industrial Zone, Bac Ninh, Vietnam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Motorcycle parts, Mobile Phone Cover, Sewing Machine Parts and Plastic Mold
Plastic Molding (Injection Molding ),Plastic Injection Molding,Electronic / Electrical Components / Electric Control
www.anphuviet.com.vn
www.bacvietgroup.com
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
5,000,000
6,568,000
An Phu Viet Plastics Co.,Ltd was founded officially on November 25th, 2011. An Phu Viet plastics Co.,Ltd is a company specializing in producing plastic products including electronic components, telephones, motorcyles.....
Bac Viet Technology Joint Stock Company was established in 2008, located in Km 7, Highway 18, Que Vo IZ, Bac Ninh, Vietnam with total area of 3.2 hecta, specializing in manufacturing injection molding and hi-tech electronics plastic products such as earphone parts, printer parts and mobile parts.
VN 03
VN 04
Product name:
Minimum lot:
Use for: Packaging, transportation
Roll box
Steel50
Material:
Product name:
Minimum lot: Use for: Mobiles
Electronic parts
Plastic500,000
Material:
Product name:
Minimum lot: Use for: Printer
Electronic parts
Plastic500,000
Material:
VIETNAMESE COMPANY34
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
BINH MINH TMC CO.,LTD
VAN LONG PLASTIC CO.,LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2008
1999
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
To automotive
Bottle containing oil
Mould
Bottle 1L
S55C, NAK80, SKD11
HDPE plastic
1
20,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Plastic Injection Mold
Pail used for oil
Mold part
Pail 18L
PX5
PP Plastic
1
1,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
To mold plastic products
Speaker
Injection mold and mold part
Frame
HPM38-S55C, PX5
ABS Plastic
1
40,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
To assemble the product
Bottle containing oil
Assembly jig
Bottle 4L
SKD11, S45C, SK3
HDPE Plastic
1
10,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
To test product
Cleanning The House
Inspection jig
Vacuum cleaner
S45C, SK3
ABS Plastic
1
20,000
Material:
Material:
Mr. NGUYEN VAN TUAN
Mr. NGUYEN TRONG TUAN
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
6,000
18,000
+84-24-3780-5296
+84-22-5379-8886
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Canon, Yamaha, Samsung, Panasonic
LG Viet Nam,Sony, Pioneer,JX Nippon Oil, Idemitsu,...
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
130
300
General Director
Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
2,000,000
1,780,000
+84-24-3780-5303
+84-22-5379-8887
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2015
ISO 9001:2015; ISO 14001:2015
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Plot B2-4-3,Nam Thang Long Industrial Park, Thuy Phuong Ward, Bac Tu Liem Dist, Hanoi City, Vietnam
No 15A, An Tri Street, Hung Vuong Ward, Hong Bang District, Hai Phong City
Plot B2-4-3,Nam Thang Long Industrial Park, Thuy Phuong Ward, Bac Tu Liem Dist, Hanoi City, Vietnam
No 15A, An Tri Street, Hung Vuong Ward, Hong Bang District, Hai Phong City
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Jigs and moulds
Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion),Assembling (Others)
www.binhminhtmc.com
vanlongplastic.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
4,500,000
9,700,000
Binh Minh TMC Co., Ltd was established in 2008. Line of business: To design and manufacture jigs, moulds, precision parts for machine. We have a team of experienced engineers who are able to design and manufacture jigs and molds according to customer requirements. Our products have been exporting to Japanese market.
Our company was established in 1999. It is located near Hai Phong port, transportation is convenient for exporting goods abroad. We manufacture plastic products like : PE, PP, ABS..for domestic and export goods. The main customers are : Pioneer, Idemitsu, JX Nippon...We provide high quality products, good service, short delivery time, satisfying every customers.
VN 05
VN 06
VIETNAMESE COMPANY 35
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
ECO VIET NAM CO., LTD
ECOTEK CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2010
2014
Product name:
Minimum lot:
Use for: home appliance, furniture
Steel coil/sheet/pipe
Cold rolled steel1,000 Kg
Material:
Product name:
Minimum lot:
Use for: Packing oil, chemical, paint, food…
Steel drum 180L/210L
Cold rolled steel200 sets
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Electric motor
Automobile and motobike
Genrator core/ EI core
PVC tube
Non grain oriented steel
Plastic
1,000 sets
1,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Electric motor
Electronics
Motor core for DC motor
Plastic Molding
Non grain oriented steel
Plastic
10,000
1,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Electric motor
Electronics
Motor core for AC motor
Mold
Non grain oriented steel
Steel
1,000 -> 10,000 sets
10 -> 15
Material:
Material:
Mr. PHAM VAN TUAN
Mr. BUI XUAN HAI
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
14,000
6,288
+84-222-3798-483
+84-222-379-8889
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Samsung, Panasonic, EWI, Chi hua, …
Muto HaNoi, Tenma Viet Nam, Nissei
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
140
130
Director
Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
6,000,000
2,000,000
+84-222-3798-484
+84-222-379-8890
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001-2008 & ISO 14001: 2015
ISO 9001-2015 & ISO 14001: 2015
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lot II.8.1 , Khai Son IZ, Thanh Khuong, Thuan Thanh, Bac Ninh
Lot III.4.1, Thuan Thanh 3 Industrial Zone, Thanh Khuong, Thuan Thanh, Bac Ninh, Viet Nam
Lot II.8.1 , Khai Son IZ, Thanh Khuong, Thuan Thanh, Bac Ninh
Lot III.4.1, Thuan Thanh 3 Industrial Zone, Thanh Khuong, Thuan Thanh, Bac Ninh, Viet Nam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Motor and transformer core lamination, metal stamping, Metal packing: drum and can, Steel pipe, steel slitting and shearing service
PVC tubes and plastic Products mold for plastic and PVC products moulding
www.ecovn.vn
www.eco-tek.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
1,900,000
ECO VIETNAM CO., LTD.(L’ECO), engaged in the supporting industry by manufacturing, processing of steel material including slitting & shearing services, motor core, transformer core lamination, stamping products, metal packing products, steel pipe.
Ecotek Co., Ltd. is a partner of the famous Japanese company, specializing in the manufacture of molds and precision plastic components, manufacture of plastic pipe for automotive, motorcycle and electronic components, 100% for export products.
VN 07
VN 08
VIETNAMESE COMPANY36
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
FOSHAN CERAMIC MACHINERY AND MOLD JSC
GIAI PHONG RUBBER CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2008
2004
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Grinding
Manufacturing for motorcyle,automobile
CNC Big-size Material X3200-Y1400-Z660
Sleeve/ Cover
S45C, S50C, S55C, K3, P20,NAK80, SKD11, SKD61,
PVC, Plastic
1
10,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Grinding
Manufacturing for motorcyle,automobile
Grinding big-size material. X3500/y1250/Z800
Sleeve/ Cover
S45C, S50C, S55C, K3, P20,NAK80, SKD11, SKD61,
PVC, Plastic
1
10,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Milling
Manufacturing for motorcyle,automobile
Big-size Milling Machine. X4300/y1400/z800
Damper seat/ Gasket
S45C, S50C, S55C, K3, P20,NAK80, SKD11, SKD61,
Rubber
1
10,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Cut Material
Manufacturing for motorcyle,office equipment and home
NC Controlled Vertical Bandsaw Amada VM3800
Oring
N/A
Silicon, Rubber
1
5,000 -> 10,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Plastic Mold
Manufacturing for motorcyle,automobile
Moldbase
Sleeve/ Cover
S50C, S55C
PVC, Plastic
1
10,000
Material:
Material:
Ms. PHAM KIEU TRANG
Mr. CHU TRONG TRUNG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
1,600
3,500
+84-243-525-0604
+84-24-3677-0568
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Osco, Daido, Fuji Vietnam, TMT, HTMP
VN Nippon Seiki Co., LTD, Nissin brake Vietnam Co., LTD, San ei Rubber Co., TLD,Thai Summit harness Public company limited
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
60
180
Sales Manager
CEO
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
1,150,000
1,000,000
N/A
N/A
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
N/A
ISO 9001-2008 & ISO 14001: 2004
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lot 46B, Quang Minh Industrial Park, Me Linh, Ha Noi
Ngoc Da, Tan Quang, Van Lam, Hung Yen
Lot 46B, Quang Minh Industrial Park, Me Linh, Ha Noi
Ngoc Da, Tan Quang, Van Lam, Hung Yen
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion), Press, Rubber Molding, Materials (Metal), Jig / Equipment, Others
Industrial Plastic, PVC and Rubber Products Mold for Rubber and PVC products moulding
www.foshanceramic.com.vn
www.giaiphongrubber.com/ www.gprubber.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
2,000,000
N/A
- Making moldbase- Precision Machining the raw material size up to 1200x3200- Processing big size press mould, piercing die, jig - Design and processing the transporting equipment in the factory.
GIAI PHONG RUBBER is manufacturer of PVC, Plastics and Rubber Parts in supporting Industries. We remain committed to our value customers and global environmental perspectives in developing original technology and manufacturing new products. Aiming to be a sustainable corporation with products and business activities which contribute to the environment, humans, and societies.
VN 09
VN 10
OFFICE ADDRESS:
VIETNAMESE COMPANY 37
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
HAI PHUONG CO.,LTD
HA NOI INDUSTRY TRADING INVESTMENT JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
1999
2011
Product name:
Minimum lot:
Use for: accessories for wood, plastic and metal industries,etc.,
accessories
N/AN/A
Material:
Product name:
Minimum lot:
Use for: Screws for wood, plastic
All kinds of normal add special bolts, nuts, screws, rivets, etc.,
Steel , Stainless steel50,000
Material:
Mr. DO HAI
Mr. LUONG NGOC THAI
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
5,000
900
+84-24-3364-8292
+84-24-3681-6289 / +(84)-976-888-048
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Ìkea, Woodslands, Nitori Funiture, Coldtech Corporation...
Kai.Ltd, Osawa, JAT.Jsc, Tecomen.Ltd, Fujipla, Sankyo, Rhythm, Fukoku, Daido, Futaba, Citicom, Pro-Vision
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
100
70
Director
Deputy Business
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
500,000
220,000
N/A
+84-24-3681-6289
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2008
ISO 9001: 2015
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lien Hiep ward , Phuc Tho District, Ha Noi City
Km12, National Highway 1A, Ngoc Hoi Street, Thanh Tri District, Hanoi
Lien Hiep ward , Phuc Tho District, Ha Noi City
Km12, National Highway 1A, Ngoc Hoi Street, Thanh Tri District, Hanoi
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Press,Machining (Ordinary) ,Canning / Welding,Surface Treatment (electroplating, coating),Others
Plastic Injection Molding, Press
haiphuonggroup.com
osakaseimitsu.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
1,800,000
1,240,000
With the experience of more than 10 years, the Hai Phuong brand has been widely recognized in the mechanical market. We have a diversified collection of high quality products, manufactured by advanced technology meeting the requirements of different industries.
HA NOI INDUSTRY TRADING INVESTMENT.JSC is a company operating in the field of mechanical engineering, plastic mold, punching, hot stamping, plastic injection molding. With the motto: “Customer satisfaction is our success”
VN 11
VN 12
Product name:
Minimum lot:
Use for: Assembly of components
Hot Stamping Products
S45C500
Material:
Product name:
Minimum lot: Use for: Medicine box
Mold plastic injection (medicine box)
20831
Material:
Product name:
Minimum lot:
Use for: Assembled in the machine
Rulo mold
NAK80 steel1
Material:
Product name:
Minimum lot:
Use for: Install fresh water system
Water cut off
ABS plastic500
Material:
Product name:
Minimum lot: Use for: Mobile phone headsets
Headset mold
NAK801
Material:
VIETNAMESE COMPANY38
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
HUNG DUNG CO.,LTD
ICHI VIETNAM SUPPORTING INDUSTRY JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
1998
2008
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Sewer machine
Checking products
Wireharness
Go No jig
N/A
Plastic, Inox
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Transformer
Wiring System
Ferrite Core
Jig Kuradai
N/A
Inox
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Car air conditioning controller
Wiring System
Control
Jig US
N/A
Inox
N/A
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Sewing machine
Wiring production
Wireharness
Jig Connector
Wire, plastic parts, electronics parts
POM Plastic
1,000
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Factories, Auto garage
Wiring systrem
Led Highbay Light
Jig TS
Led chip, Aluminium heatsink
Inox
1
N/A
Material:
Material:
Mr. NGUYEN TIEN DUNG
Mr. PHAM HOANG LONG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
2,000
2,000
+84-220-3782-399
+84-24-3645-4297
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Japanese, Vietnamese
SD Global Viet Nam, Sumidenso Viet Nam, Sumi VietNam Wiring System
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
100
78
Director
Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
500,000
1,000,000
+84-220-3782-396
N/A
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001-2015
ISO 9001:2015
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Km 42 + 600, Highway 5A, Lai Cach town, Cam Giang district, Hai Duong province
Lot 05/9B Hoang Mai Industrial Park, Hoang Mai District, Ha Noi city
Km 42 + 600, Highway 5A, Lai Cach town, Cam Giang district, Hai Duong province
Lot 05/9B Hoang Mai Industrial Park, Hoang Mai District, Ha Noi city
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Electronic / Electrical Components / Electric Control,Assembling (Home electronics), Others
Jig / Equipment
www.hungdunghd.com
www.ichivietnam.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
3,000,000
3,630,000
Hung Dung Company is a company specialized in manufacturing supporting products and lighting equipment - led lights. Our products use the component of the world famous electronics companies and are managed according to ISO 9001: 2015 standards.
Ichi Vietnam is a small company founded in 2008 with under 100 employees. Howerver, our manufacturing performance started 5 years before that in an industrial mould and jig manufacturing workshop. After that period of time, we have had a lot of experience and gained much confidence of the customers, especially Japanese customers.
VN 13
VN 14
VIETNAMESE COMPANY 39
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
INDUSTRIAL MECHANICS AND AUTOMATION CO.,LTD (IDMEA CO.,LTD)
INNOTEK JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2008
2011
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Jig Assembly
Motocycle
Jig Assembly
Stay Comp Ign Coil
Aluminium
SPHC
1
1,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Auto Machine
Motocycle
Glue Machine
Stay
Glue Machine
SPHC
1
1,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Manufacture
Motocycle
Automatic Machines
Clamper Fuel Tube
N/A
SWRM10, SPHC
1
2,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
goods transport in factory
Motocycle
Conveyor, roller
Lever Comp Br Lock
N/A
Stainless steel
1
1,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Inspection And Assembly Of Mechanical Products
Motocycle
Jig
R Pillion Step
Plastic, Al, steel, Inox
SPHC
1
1,000
Material:
Material:
Ms. PHAN THI THANG
Ms. NHUNG DONG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
5,000
25,000
+84-24-6296-2032
+84-22-2362-3318
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Sam Sung, Canon, Kyocera, Sumitomo, Toyota
Honda, Showa Japan,Thaisteel, Hokuriku, Showa Vietnam, Jaguar, TS Vietnam
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
140
350
Sales Manager
Assistant of R&D Department
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
240,000
6,000,000
N/A
+84-22-2362-3319
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
N/A
ISO 9001:2008, 14001:2004
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
No.4, Lot 2, Lai Xa Industrial Park, Kim Chung, Hoai Duc, Hanoi
Lot II- 4.1, Que Vo II Industrial Zone, Ngoc Xa Commune, Que Vo District, Bac Ninh Province, Vietnam
P601, 6 Floor, Kim Anh Building, 78 Lane, Duy Tan, Cau Giay, Ha Noi
Lot II-4.1, Que Vo II Industrial Zone, Ngoc Xa Commune, Que Vo District, Bac Ninh Province, Vietnam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Jig / Equipment
Press,Machining (Ordinary) ,Machining (Precise),Canning / Welding
www.idmea.com
www.innotek.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
4,450,000
6,000,000
IDMEA is established in 2008. We supply Mechanics Equipments adn for FDI factory. we have a fully tooled machine shop, equipped with CNC machining centers as well as vertical and horizontal boring mills. IDMEA is able to provide the optimum manufacturing process from start to finish.
Innotek’s business is majoring in manufacturing automobile- motocycle parts and component in supporting industry.We have various kind of machine was imported from Japan and Taiwan, capability to sastify the demand of domestic and oversea market. Our motto is always satisfy all requirement of customers with stable quality, reasonable prices and delivery on time.
VN 15
VN 16
VIETNAMESE COMPANY40
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
JAT AUTOPARTS AND INDUSTRY EQUIPMENTS PRODUCTION., JSC
KIM LONG PRODUCTION AND TRADING SERVICE CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2008
2001
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Motor bike
Motorbike
Drump brake
Jig for assembly
Steel
S50C, Aluminium
5,000
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Automobile Part
Motorbike
Pipe
Press machine
Inox SUS304
S50C
5,000
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Printer
Motorbike
Holder
Rubber Mold
Steel
S50C
5,000
1
Material:
Material:
Product name:
Minimum lot: Use for: Motorbike
Boss center
Steel5,000
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Motorbike part
Motorbike
Motorbike part
Rubber Mold
Steel
S50C
5,000
1
Material:
Material:
Ms. NGUYEN TRANG NHUNGMs. TRINH QUYNH TRANG
Mr. HA QUYET THANG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
3,500
4,000
+84-9-6639-1436/ +84-958-378-499
+84-24-3780-5052
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Honda, Piaggio, TSC
Honda, Vietinak, Yasufuku, Ishigaki
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
280
50
Marketing
Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
900,000
2,000,000
N/A
+84-24-3780-5063
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2008, ISO 14001:2004
ISO 9001:2015
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lot II-8.2 Que Vo II IZ, Ngoc Xa commune, Que Vo District, Bac Ninh Province
Lot A2, CN5-Tu Liem IP-Phuong Canh Commune, Nam Tu Liem District, Ha Noi
Lot II-8.2 Que Vo II IZ, Ngoc Xa commune, Que Vo District, Bac Ninh Province
Lot A2, CN5-Tu Liem IP-Phuong Canh Commune, Nam Tu Liem District, Ha Noi
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Press, Machining (Ordinary), Machining (Precise), Canning / Welding, Forging
N/A
http://www.jat-autopart.com
www.kimlongmold.com/
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
7,030,000
2,000,000
[email protected]@jat-autopart.com
JAT company specializes in the field of manufacturing auto parts, motorbike parts, industrial equipment and other mechanical products. Currently JAT., JSC has become a important company in manufacturing automobile and motorcycles parts for supporting industry in Viet Nam.
VN 17
VN 18
VIETNAMESE COMPANY 41
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
KIM SEN INDUSTRIAL JSC
KYODAI MANUFACTURE JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2013
2011
Product name:
Minimum lot:
Use for: Manufacturing for electronics
Insert
SUS304200
Material:
Product name:
Minimum lot:
Use for: Industrial electricityPlastic molds
855c5
Material:
Product name:
Minimum lot:
Use for: Manufacturing for electronics
Jig,fixture
A60612,000
Material:
Product name:
Minimum lot:
Use for: Manufacturing for electronics
Molds
S45C4
Material:
Product name:
Minimum lot:
Use for: Manufacturing for electronic…
Jig,fixture,molds…
SUS304,SKD11,A6061…1->10.000
Material:
Mr. TRAN DANG KHOA
Mr. NGUYEN QUANG VU
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
21,000
2,500
+84-24-3795-7410
+84-22-0361-0079
MAIN CUSTOMERS:
MAIN CUSTOMERS:
KMW, M&C, Eurowindow, Oristar, Rhythm Precision...
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
142
30
Sales Executive
CEO
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
3,600,000
820,000
+84-24-3795-7412
N/A
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2015, ISO 14001:2015, NTR 16:2014/BXD, JIS H4100:2006, EN 755-9:2008
ISO 9001-2008 ,5S
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Yen Phong Industrial Park, Yen Phong Dist., Bac Ninh Province
Industrial Park 1,Thach Khoi, Hai Duong City, Hai Duong Province
Yen Phong Industrial Park, Yen Phong Dist., Bac Ninh Province
Industrial Park 1,Thach Khoi, Hai Duong City, Hai Duong Province
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Extrusion, Machining (Precision)
PVC products moulding,jig,fixture…
http://kimsen.com.vn/
kyodai.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
6,700,000
N/A
Established in 2013, Kim Sen Industrial JSC has gradually gained reputation in manufacturing aluminum profiles and precision machining. With modern production lines and advanced technology, we are capable of producing high quality and diverse products, which meet the highest standards set by customers.
Kyodai JSC has a factory in Thach Khoi industrial zone, Hai Duong is a company that manufactures high precision mechanical fittings in electronic companies such as jigs, fixtures, molds. Customer satisfaction is our business criteria.
VN 19
VN 20
Product name:
Minimum lot:
Use for: Industrial purposesAluminum heat sink
Aluminum alloy300
Material:
Product name:
Minimum lot:
Use for: Industrial purposesAluminum Engine shell
Aluminum alloy300
Material:
Product name:
Minimum lot:
Use for: Conveyor, machine frame, billboard frame, expo frame, trolley frame
Aluminum frame
Aluminum alloy300
Material:
Product name:
Minimum lot:
Use for: Aluminum parts for bicycle, motor bike, car
Aluminum equipment for vehicle
Aluminum alloy300
Material:
Product name:
Minimum lot: Use for: Industrial purposes
Industrial aluminum profiles
Aluminum alloy300
Material:
VIETNAMESE COMPANY42
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
MANH QUANG CO.,LTD
MANUTRONICS VIETNAM JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
1983
2003
Product name:
Minimum lot: Use for: Vehicle, other industry
Cold forging part
Steel10,000
Material:
Product name:
Minimum lot:
Use for: MotorcycleSpindle
Steel500
Material:
Product name:
Product name:
Product name:
Product name:
Minimum lot:
Minimum lot:
Minimum lot:
Minimum lot:
Use for:
Use for:
Use for:
Use for:
Motorcycle
Mobile phone, Automotive, ...
Mobile phone, Automotive, ...
Mobile phone, Automotive, ...
Ratchet gear
PCBA
PCBA
PCBA
Steel
PCB, E-compoment
PCB, E-compoment
PCB, E-compoment
5,000
N/A
N/A
N/A
Material:
Material:
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Motorcycle
Computer, Printer, FAX, ...
Gear
USB cable
SCM415
Cable, PVC, connector,...
500
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Agricutural Machine
User software and Manual for OEM
Cold forging bevel Gear
Compact Disc
SCM415, SCM 420
Polycarbonate, Aluminum
10,000
500
Material:
Material:
Mr. NGUYEN MANH QUANG
Mr. TRAN NGOC LINH
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
27,000
10,000
+84-24-3688-3376
+84-22-2371-0499
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Honda Vietnam, Sumitomo Nacco, FCC
Compact Disc (Canon, Brother, Samsung, Fujixerox, Panasonic, ...); PCB Assembly (Triom, Flexstar, CSR, RFT, Samsung, ...)
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
250
180
CEO
Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
4,500,000
10,000,000
+84-24-3688-3378
+84-22-2371-0233
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
9001-2008
ISO9001:2008, ISO14000:2008
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
924 Kim Giang street, Thanh Liet, Thanh Tri Ward, Hanoi, Vietnam
No.7, TS5 road, Tien Son IZ, Hoan Son commnue, Tien Du district, Bac Ninh
924 Kim Giang street, Thanh Liet, Thanh Tri Ward, Hanoi, Vietnam
No.7, TS5 road, Tien Son IZ, Hoan Son commnue, Tien Du district, Bac Ninh
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Press,Stamping Dies,Machining (Ordinary) ,Machining (Precise),Sheet Metal (Ordinary),Casting,Forging,Surface Treatment (electroplating, coating),Heat Treatment
Electronic / Electrical Components / Electric Control,Others
www.manhquang.com
http://www.manutronics.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
10,000,000
14,600,000
Established in 1983, Manh Quang Co.,Ltd specializing in all kind of sprocket, gears, shafts and spindle, mechanical parts for vehicles, forklifts, agriculture machine and others industries with 100% process in house. Beside that we also do cold forging, lathe, machining, 4 axis, 5 axis, grinding, hob, heat treatment service.
ManuTronics Vietnam JSC., Address: No 7, TS5 roads, Tienson Industrial zone, Bacninh, Vietnam.Establishment: March, 2003Type of busines: 100% Vietnamese – owned Main product : Optical disc, Cable, Electronic assembly.
VN 21
VN 22
VIETNAMESE COMPANY 43
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
PHAN LE BAO VIET NAM TECHNOLOGY CO.,LTD
SEIKI INNOVATIONS VIETNAM CO.,LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2014
2015
Product name:
Minimum lot:
Use for: Electric and other industry
Electric and control box
N/A1
Material:
Product name:
Product name:
Product name:
Minimum lot:
Minimum lot:
Minimum lot:
Use for:
Use for:
Use for:
Speaker
Mobile
Printer
Jig SUS 304
Robot 3 axis machine
3D printer machine
SUS304
Steel
Aluminum
1
1
1
Material:
Material:
Material:
Ms PHAN VAN ANH
Mr. HOANG VAN TRUONG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
4,000
2,000
+84-24-6253-1188
+84-22-2384-8186
MAIN CUSTOMERS:
MAIN CUSTOMERS:
N/A
Japanese manufacture
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
85
60
CEO
Sales Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
200,000
300,000
N/A
+84-22-2384-8166
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
N/A
ISO 9001:2008
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
An Khanh, hoai Duc, Ha noi
Road D2, Dai Dong - Hoan Son IP, Bac Ninh
Bt4.07, Viglacer Xuan Phuong, Xuan Phuong, Tu Liem South, Ha Noi
Road D2, Dai Dong - Hoan Son IP, Bac Ninh
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Jigs, Automation machine, Conveyor
Sheet Metal, Press, Punching, Bending, Welding, Coating, Electronic / Electrical Components / Electric Control, Assembling Construction Equipment, Jig / Equipment
lbtechvina.com.vn
http://seiki.vn/jp/
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
950,000
PHAN LE BAO VIET NAM TECHNOLOGY is production professional jigs, automation machine, conveyor.
SEIKI is mechanical manufacture professional supplying of ancillary industries especially in precision engineering for sheet metal parts, stamping and metal bars. Our products supply in many areas: machinery, electronics, electrical, construction, medical industry, food industry... We provide a variety of enclosures with various finishes.
VN 23
VN 24
Product name:
Minimum lot:
Use for: Electronic / Electric components
Stamping parts
N/A1,000
Material:
Product name:
Minimum lot:
Use for: Machine and other industry
Machine cover
N/A1
Material:
Product name:
Minimum lot:
Use for: Electronic / Electric components
Sheet metal 2
N/A1
Material:
Product name:
Minimum lot:
Use for: Machine and other industry
Machine frame
N/A1
Material:
VIETNAMESE COMPANY44
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
SEIKICO PRECISION MECHANICAL CO.,LTD
SHENGLI VN CO., LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2010
2000
Product name:
Minimum lot:
Use for: Manufacturing for motorcyle,automobile
Tube Air, Duct
PVC, Plastic10,000
Material:
Product name:
Minimum lot: Use for: Machine, Jig
Special screws
SUS303, SUS304, SUS430J2,…
100Material:
Product name:
Minimum lot: Use for: Electricity bike
Colar
Plastic (POM, PE, Teplon,…)
100Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Jig and Mold
Manufacturing for motorcyle,office equipment and home
Precision Pin
Rubber sean
SKD11, SKD61, S45C, SUS
Silicon, Rubber
50
5,000 -> 10,000
Material:
Material:
Mr. GIAO THANH SON
Ms. HOANG THU NGOC
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
1,700
10,000
+84-24-3780-5205, +84-985-472-963
+84-9-4366-6638
MAIN CUSTOMERS:
MAIN CUSTOMERS:
N/A
N/A
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
60
220
CEO
Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
500,000
10,000,000
N/A
+84-20-4366-1918
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001-2008
ISO 9001-2008
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lot A2CN1, Minhkhai IZ, Bac Tuliem, Hanoi, Vietnam
Lot D9-D10, Dinh Tram Industrial Zone, Bac Giang province
Lot A2CN1, Minhkhai IZ, Bac Tuliem, Hanoi, Vietnam
Lot D9-D10, Dinh Tram Industrial Zone, Bac Giang province
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Metal parts, pin, screws, piston, shaft,…
Main products are OEM parts of motorcycle and automobile with material from rubber and plastic.
www.seikico.net
www.shenglivietnam.com
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
1,900,000
N/A
“SEIKICO PRECISION MECHANICAL CO.,LTD is a supporting industry for precision mechanical parts for vary industries. We are specialized in manufacturing small parts for industries. We are continuously improving our capability to meet the hardest to please customers requirements. All of our efforts is to make you smile!
SHENGLI VN INTERNATIONAL TRADING PRODUCTION COMPANY LIMITED was established in 2000. Main products are OEM parts of motorcycle by EPDM rubber, NBR synthetic rubber, NBR / PVC, CR foam rubber, CR / SBR, etc.
VN 25
VN 26
Product name:
Minimum lot:
Use for: Manufacturing for motorcyle, automobile
Tube Air, Duct
PVC, Plastic10,000
Material:
Product name:
Minimum lot:
Use for: Manufacturing for motorcyle,automobile and construction equipment
Damper seat/ Gasket
Rubber10,000
Material:
Product name:
Minimum lot:
Use for: Manufacturing for motorcyle,office equipment and home
Oring
Silicon, Rubber5,000 -> 10,000
Material:
VIETNAMESE COMPANY 45
VIETNAM - JAPAN
- Supporting industries exhibition
Manufacturing for motorcyle,automobile and construction equipment
Damper seat/ Gasket
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
SMART VIETNAM PRECISION MECHANICAL JSC
SUNPLA JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2016
2012
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
test product, assemble the product
Injection Molding
Jig
Screw Head Set
S55C, SKD11,S45C,...
SKD61, DPS400, DPS570X,SK
1
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Machining
For Mold Die
Tool cabinets
Mold Parts
SS400, SUS201, SUS304,...
S50C, S55C, SCM440, P20, NAK55, NAK80, SKD11, SKS3, SKS93, SK3, SK4
1
1
Material:
Material:
Product name:
Minimum lot: Use for: Injection molding, Press
Mold Die
S50C, S55C, SCM440, P20, NAK55, NAK80, SKD11, SKS3, SKS93, SK3, SK4
1
Product name:
Minimum lot:
Use for: Plastic injection molding, Stamping Dies
Fittings
Starvax, Nak80,HPM311
Material:
Material:
Product name:
Minimum lot:
Use for: Printer, Telecom, Automotive, Medical
Plastic parts
ABS, HIPS, PC, PBT, LCB, PS, PA
5,000
Product name:
Minimum lot:
Use for: Assembling (Office Automation Equipment)
Sheet metal parts
SS400, SUS304,A5052, A6061
1Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Plastic injection
Printer, Parameter
Mold for plastic injection
Plastic gears
Starvax, Nak80, P20,...
POM
1
2,000
Material:
Material:
Mr. NGUYEN HUY DU
Mr. NGUYEN DUC CUONG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
3,200
10,000
+84-222-388-3129
+84-24-0366-2288
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Nissei, FMV, Mitsuba, Hamaden, SAV, NSVH,...
Canon Vietnam, Nissei Technology, Rhythm, Nidec, Tenma, ToyoDenso
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
65
170
Sales Manager
Sales Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
1,000,000
672,000
+84-222-388-3128
+84-24-0366-2266
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001:2015, ISO 14001:2015, 5S
ISO 9001-2015, ISO 14001-2015
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lot E7, Dong Tho Industrial Zone, Yen Phong District, Bac Ninh Province, Vietnam
Lot E1-E2, Dinh Tram IZ, Hoang Ninh, Viet Yen, Bac Giang
Lot E7, Dong Tho Industrial Zone, Yen Phong District, Bac Ninh Province, Vietnam
Lot E1-E2, Dinh Tram IZ, Hoang Ninh, Viet Yen, Bac Giang
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Plastic injection molding, machining, Sheet metal,...
Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion),Plastic Injection Molding,Assembling (Others),Jig / Equipment,Others
http://smartpm.com.vn/
www.sunpla.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
1,500,000
1,500,000
We are proud to be prestige and professional provider with many products such as: Mold, plastic injection mold and Sheet metal fabrication products for domestic and foreign partners with high quality. Our mission is giving to customers the products with high precision, optimal technical and perfect service quality.
Sunpla was established on Jan 5, 2012 in Dinh Tram, Bac Giang. Our factory is equipped with modern equipment and machines. Main business scopes: designing, manufacturing mold, die and engineering plastic products, precise plastics, maintaining and repairing molds, importing and exporting plastic materials. Our main customers are Canon, Tenma, Nidec, Nissei Technology, Panasonic...
VN 27
VN 28
VIETNAMESE COMPANY46
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
T&C VIETNAM CO.,LTD
TAN PHAT AUTOMATION JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2010
2006
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Surface treatment
Collaborative Robots
Copper plating
Universal Robots
Copper
N/A
1
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Surface treatment( forming)
Automated Process Production
Phosphate
Machines
Chemical/ phosphate ( zinc, Fe)
N/A
1
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Surface Treatment
Automated Optical Inspection, Barcode/ QR Code Reading
Roller plating line ( auto)
Vision Applications
Zinc, NaOH, Acid, ....
N/A
1
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Surface Treatment
Parts Feeding, Sorting, Assembly, Measuring, Conveyor
Zn plating
Factory Automation Solutions
Chemical Zinc
N/A
1
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Nikel; Chrome line
Assembly System, Machine Tending, Pick and Place, Packing, Palettizing
Titan hanger
Robotics Application
Titan
N/A
1
1
Material:
Material:
Ms. DANG HAU
Mr. NGUYEN TRONG THUONG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
2,500
1,500
+84-24-3748-0889
+84-24-3685-7776
MAIN CUSTOMERS:
MAIN CUSTOMERS:
SHOWA, KYB, HASHIMA, JEIL-TECH
Canon, Denso, SEEV, SEI, ToyodaGosei, Toyota, Samsung Electronic, Samsung Display, LG
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
40
165
Sales Excutive
Vice Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
1,000,000
400,000
+84-24-3748-0899
+84-24-3685-7775
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO9001-2008/14001
ISO 9001:2008, CE 12601:2001
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Duc Noi Hamlet, Viet Hung Commune, Dong Anh District, Ha Noi
No 168, Phan Trong Tue Road, Thanh Liet Ward, Thanh Tri Dist, Ha Noi, Viet Nam
Duc Noi Hamlet, Viet Hung Commune, Dong Anh District, Ha Noi, Viet Nam
No 168, Phan Trong Tue Road, Thanh Liet Ward, Thanh Tri Dist, Ha No, Viet Nam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Surface Treatment (electroplating, coating)
Machining (Ordinary) ,Machining (Precise),Industrial Goods (Industrial machine / conveyance equipment) ,Jig / Equipment
http://tcvietnam.vn
www.tpa.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
300,000
5,100,000
T&C Vietnam specializes in surface treatment: Zinc Plating, Crom Plating, Niken Plating, Phosphate. T&C Vietnam use measure of strict overall quality control to finish building ISO 9001-2008 and 14001 system. “Commit customer-oriented quality” is strategy guideline and aim in developing process of T&C Vietnam in present and future.
Tanphat Automation JSC (TPA) focused design, manufacturing and supplying equipment and system for Industry and Training. We have a skilled design team to provide solution, customized machine and tool in many fields of factory automation. Our goal is improbable quality, productivity with reasonable price, committed delivery schedule.
VN 29
VN 30
VIETNAMESE COMPANY 47
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
TECHNOKOM JSC
THINH HUNG CASTING CO.,LTD
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2010
2000
Product name:
Minimum lot:
Use for: To Use For High Voltage Power Line
Balance weight
FC 200N/A
Material:
Product name:
Minimum lot:
Use for: To Assemble For Sewing Machine
Sewing machine
FC 150N/A
Material:
Product name:
Minimum lot:
Use for: To Assemble For Sewing Machine
Sewing machine
FC 150N/A
Material:
Product name:
Minimum lot:
Use for: To Use For Punping Water
Pump Body 136
FC 200N/A
Material:
Product name:
Minimum lot: Use for: To Use For The Ship
Valve body
FC 200N/A
Material:
Mr. DINH XUAN SON
Ms. BUI THI THUY
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
4,500
12,000
+84-22-1379-1750
+84-22-5628-3550
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Goshi-Thanglong, BBSV, TSVN, SENTEC, ICSN Group (USA), ITP Group (Norway),...
Pagasus,Shinyei, Showa valve, KNC
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
390
150
Director
HR.MANAGER
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
1,650,000
400,000
+84-22-1379-1751
N/A
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO 9001-2008
ISO 9001:2008
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Tan Quang Industrial Zone, Van Lam District, Hung Yen, VietNam
Hamlet 7 (industrial site) of Kien Bai Commune, Thuy Nguyen District, Hai Phong City
Tan Quang Industrial Zone, Van Lam District, Hung Yen, VietNam
Hamlet 7 (industrial site) of Kien Bai Commune, Thuy Nguyen District, Hai Phong City
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Pressing, Welding (Robot,MIG,TIG,MAG,Welding), Polishing
Machining (Ordinary) ,Machining (Precise),Casting
www.technokom.com.vn
ducthinhhung.com
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
10,000,000
3,358,000
TECHNOKOM JSC., specializes in manufacturing of motorcycles, auto parts and machining parts.The main products:the products of pressing, welding, polishing and machining,...with our staff of the highly qualified personnel, experienced and equipped with advanced machines TECHNOKOM has been a prestigious and reliable partner of the leading companies in automotive and motorcycles manufacturing in Vietnam.
As a factory constantly improve, enhance the prestige and quality of products. The focus is: “For our beloved customers.” With the goal “GOOD QUALITY, GOOD PRICE, GOOD SERVICE”
VN 31
VN 32
Product name:
Minimum lot: Use for: Motorcycle parts
Muffler Cover Protector
SUS304- BA; SPCC-SB1,000
Material:
Product name:
Minimum lot:
Use for: Motorcycle partsStand Comp Main
STAM290GA, STAM390G, SPHC
1,000Material:
Product name:
Minimum lot: Use for: Motorcycle parts
Stay Comp Muff
SPHC1,000
Material:
Product name:
Minimum lot: Use for: Parts for Furniture
Stainless Steel Sofa Leg
SUS304, SUS2012,000
Material:
Product name:
Minimum lot:
Use for: Motorcycle parts
Parts for Muffler Exhaust
SUS409L1,000
Material:
VIETNAMESE COMPANY48
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
VAN XUAN CO.,LTD
VIET AN JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2005
2008
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Manufacturing verhicle
Motorbikes
Parts for verhicle
Wire Harness
S25C
Wire, housing, connectors ...
1
100
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Plastic injection parts
Electronics
Plastic injection molds
Wire Harness
P20, S55C
Wire, housing, connectors ...
1
100
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Presuare casting parts
Automobile
Presuare casting molds
Wire Harness
SKD61
Wire, housing, connectors ...
1
100
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Stamping Parts
Motorbikes
Stamping Dies
Wire Harness
SKD11 (9XC)
Wire, housing, connectors ...
1
10
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Hot forging parts
Motorbikes
Hot forging mold for motorbike connecting rod
Wire Harness
SKT4 (55NiCrMoV2)
Wire, housing, connectors ...
1
100
Material:
Material:
Mr. TRAN VAN MAU
Ms. BUI THANH HANG
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
10,000
4,400
+84-20-8221-2294
+84-24-3363-5443
MAIN CUSTOMERS:
MAIN CUSTOMERS:
FUJITA, FUTU1, ABB, DISOCO, MEINFA, XLDA
Piaggio, Asti, Toyodenso, Asahidenso,...
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
105
230
Technical manager
Vice Director
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
750,000
1,000,000
+84-20-8376-2715
+84-24-3363-5447
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO9001-2008
ISO 9001: 2008; ISO 14001: 2004
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
No. 3 Thong Nhat Street, Cai Dan Ward, Song Cong City, Thai Nguyen Province
Lot A5, Phung Industrial Zone, Dan Phuong Dist, Ha Noi, Viet Nam
No. 3 Thong Nhat Street, Cai Dan Ward, Song Cong City, Thai Nguyen Province
Lot A5, Phung Industrial Zone, Dan Phuong Dist, Ha Noi, Viet Nam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Rubber Injection Molding,Stamping Dies,Plastic Injection Molding,Machining (Ordinary) ,Machining (Precise),Heat Treatment
Automatic wire cutting, stripping and stamping m/cs. Extruders of PVC tubes for wireharness and other application
vanxuantools.com
http://viet-an.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
2,000,000
4,500,000
Van Xuan Co.Ltd is a maker of molds and tools.Our products are supplying to Japanese companies as FUJITA, KYOEI, and European companies as ABB, WIHA. Our products were met their very high quality requirements.We always innovate technology, improve managing production following ISO9001-2008 and 5S, train staff to satisfy the more and more higher requirements of customers.
Viet An Joint Stock Company was established 2008, with an area of 4,400 square meters factory in Phung Industrial Zone, Dan Phuong District, Hanoi.1. More than 85% custormers are japanese companies. (We are able to satisfy quality control of factories )2. Competitive price as we are a 100% Vietnamese invested cpmpany.
VN 33
VN 34
VIETNAMESE COMPANY 49
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
VIET AU ENGINEERING JSC
VIET COMPETENCE TECHNOLOGY JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2016
2010
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Compressor
Automated process production
Shaft
Jig, Tools
FCD550
Steel, Plasstic
10
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Water System
Automated process production
Inlet housing
Automated guided vehicle – AGV
FCD450
Steel, Plasstic
100
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Steel Mill
Automated process production
Guide
Automation Assembly Machine
FD600
Steel, Plasstic
100
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Steel Mill
Automated process production
Guide
Laser Making Machine
27Cr
Steel, Plasstic
10
1
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
machine
Automated process production
Drop box
Automation machine
FC250
Steel, plastic....
100
1
Material:
Material:
Mr. NGUYEN VAN NHAN
Mr. TRAN VAN NGOC
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
2,500
3,000
+84-22-5883-1099
+84-24-3780-5398
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Japan, Europe
Denso Viet Nam, Hamaden,...
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
45
130
General Director
Sales Manager
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
1,650,000
1,000,000
N/A
+84-24-3780-5399
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO9001:2008
ISO 9001-2008
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Lot CN2A, Namcaukien industrial park, Kienbai ward, Thuynguyen district, Haiphong city, Vietnam
Lot B2-3-3b, Nam Thang Long Industrial Zone, Thuy Phuong Ward, Bac Tu Liem District, Ha Noi City, Vietnam
Lot CN2A, Namcaukien industrial park, Kienbai ward, Thuynguyen district, Haiphong city, Vietnam
Lot B2-3-3b, Nam Thang Long Industrial Zone, Thuy Phuong Ward, Bac Tu Liem District, Ha Noi City, Vietnam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Casting,Materials (Metal)
Machining (Precise),Industrial Goods (Industrial machine / conveyance equipment) ,Jig / Equipment
vej.com.vn
vicotech.com.vn
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
N/A
6,000,000
VietAu Engineering Jsc (VEJ) produces cast iron and steel castings (FC, FCD, alloyed iron and steel). We operate our foundry no.1 with capacity 2,500T/year in Hai phong city, equipped by Furan sand line from Japan, Spectro Lab from Germany, CE meter, Ultrasonic detector, Brinell tester...from Japan. Our website www.vej.com.vn. Welcome !
We are operating in the fields: Design and manufacture of machines, automated assembly lines, Jig and fixture, system integration expertise...for automotive industrial, electronic industrial, etc...
VN 35
VN 36
VIETNAMESE COMPANY50
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
VIET HA CO.,LTD
VIET UC INDUSTRIAL AND COMMERCIAL JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
1995
2002
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Press machine
Component production
Press Machine
Plastic in Jection Mold
N/A
Metal
N/A
10,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Hook lift truck
Production
Hydraulic cylinders
Blow Mold
N/A
Metal
N/A
10,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Garbage truck
Production
Telescopic cylinder, hydraulic cylinders
Jig check the product
N/A
Metal
N/A
1 Set
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
manufacture of Special vehical and Industrial application
Production
Hydraulic mini Power Units
Punching Mold
N/A
Metal
N/A
200,000
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
manufacture of Special vehical and Industrial application
Component production
Hydraulic cylinders
Punching mold
N/A
Metal
N/A
10,000
Material:
Material:
Mr. NGUYEN DINH HOA
Ms. DUONG BICH NGOC
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
5,000
950
+84-24-3761-7383
+84-24-3681-4158
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Industrial Application, Brick Manufacturing, Ship, Boat
JAT company, KAI company, Technokom company, OSAWA, HONDA,...
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
45
50
Director
Staff
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
270,000
180,000
+84-24-3761-2170
+84-24-3681-4158
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
Certificate of Approval for Manufactures by Vietnam Register
ISO9001
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
D Section, Pho Noi A industrial zone, Van Lam Dist, Hung Yen
Km12, 1A Highway, Van Dien Town, Thanh Tri District, Ha Noi City
No 62, Alley 6/12 Doi Nhan Street, Vinh Phuc Ward, Ba Dinh Dist, Ha Noi
Km12, 1A Highway, Van Dien Town, Thanh Tri District, Ha Noi City
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Machining (Precise),Plant Equipment (For Ship plant / Power plant / Large-scale plant),Jig / Equipment
Stamping Dies,Plastic Injection Mold-ing,Machining (Precise)
www.vietha.com.vn
http://cokhivietuc.com
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
1,200,000
1,150,000
Established in 1995, Viet Ha Co., Ltd is specialized in manufacturing and distributing hydraulic cylinders and hydraulic system includes: Manufacturing Hydraulic Cylinders, Telescopic cylinders, Designing and manufacturing of hydraulic system: hydraulic mini power units. Authorized distributor of hydraulic pumps, valves, motors...
Viet Uc industrial and commercial Joint stock Company is an enterprise specialized in manufacturing and manufacturing malds serving industries plastic molds, mold punch, molds of all kinds,…. With modern equipment, professional staff, experience, we are committed to providing quality products, reasonable price, fastest progress. With motto: “The success and satisfaction of our customers is our success”
VN 37
VN 38
VIETNAMESE COMPANY 51
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
ESTABLISHMENT YEAR:
VN-J PRECISION MECHANICS CORPORATION
YAMAGUCHI VIETNAM JSC
PERSON IN CHARGE:
PERSON IN CHARGE:
CONTACT INFORMATION
CONTACT INFORMATION
COMPANY PROFILE
COMPANY PROFILE
SELLING ITEMS
SELLING ITEMS
2012
2011
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Welding shelves
Check product
Welding Jig
Jig
SKD, SCM440
A502
1
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Electronic assembly line
Check Product
Jig
Aluminum mold
Aluminum
A7075
1
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
CNC cutting
Molding
Procut (table version)
Molded parts
Metallic
SKD61
1
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
Assemble line
Molding
Jig
Van
Metallic
SUS316
1
N/A
Material:
Material:
Product name:
Product name:
Minimum lot:
Minimum lot:
Use for:
Use for:
CNC cutting
zinc molding machine
Procut
Piston
Metallic
SKD61
1
N/A
Material:
Material:
Mr. PHAM TRI VI
Mr. DO XUAN MINH
FACTORY AREA (M²):
FACTORY AREA (M²):
TEL:
TEL:
2,000
N/A
+84-24-3773-8362
+84-24-6684-4282
MAIN CUSTOMERS:
MAIN CUSTOMERS:
Toyota, Honda, Yamaha, Bunka
Fujikin, Hoa Phat, Honda look, Panasonic, Dawa, Mabuchimotor, Sam Sung, Rhythm,…
NUMBER OF EMPLOYEES:
NUMBER OF EMPLOYEES:
POSITION:
POSITION:
65
N/A
Sale Manager
N/A
CHARTER CAPITAL (USD):
CHARTER CAPITAL (USD):
FAX:
FAX:
3,000,000
250,000
+84-24-3773-8364
+84-24-3734-9267
QUALITY CERTIFICATES:
QUALITY CERTIFICATES:
ISO, DIN, JIS, 5S
N/A
FACTORY ADDRESS:
FACTORY ADDRESS:
OFFICE ADDRESS:
OFFICE ADDRESS:
Group Yen Phuc, Bien Giang, Ha Dong, Ha Noi
No. 2, Lot 3, Lai Xa Industrial Park, Kim Chung Commune, Hoai Duc Dist., Hanoi
Group Yen Phuc, Bien Giang, Ha Dong, Ha Noi
7th Floor, A1-1 A2-2 Building, Le Duc Tho Street, My Dinh 2 Ward, Nam Tu Liem District, Hanoi, Vietnam
MAIN TECHNOLOGY:
MAIN TECHNOLOGY:
WEBSITE:
WEBSITE:
Sheet Metal (Precise), Industrial Goods (Industrial machine / conveyance equipment), Jig / Equipment, Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion), Plastic Injection Molding
Mould, Parts, Jigs and tools
vn-j.com.vn
http://www.yamaguchi.vn/
INCOME OF NEAREST YEAR (USD):
INCOME OF NEAREST YEAR (USD):
EMAIL:
EMAIL:
8,400,000
3,541,377
VN-J PRECISION MECHANICS CORPORATION specializes in the design and manufacture precision mechanical products as jigs, molds, and machines: CNC plasma cutting machines, Welding machines... With a professional team and synchronous, good quality machine system, We always try to meet the diverse demands and satisfaction of our customers.
Yamaguchi Vietnam JSC was founded in February of 2011 and specialized in precision metal processing and manufacturing. Our vision is to become a leading manufacturer of supporting industry in Vietnam.
VN 39
VN 40
VIETNAMESE COMPANY52
VIETNAM - JAPAN
- Supporting industries exhibition
ESTABLISHMENT YEAR:
THUAN THANH ENVIRONMENT JSC
PERSON IN CHARGE:
CONTACT INFORMATION
COMPANY PROFILE
SELLING ITEMS
2009Product name:
Minimum lot:
Use for: Aluminum material use for casting
Alimium Alloy Ingot
Aluminum Chips, DrossN/A
Material:
Product name:
Minimum lot:
Use for: Aluminum material use for die casting
Alimium Alloy Ingot
Aluminum Chips, DrossN/A
Material:
Mr. MITSUI MOTOJI
FACTORY AREA (M²):
TEL:
129,600
+84-222-377-4886
MAIN CUSTOMERS: Sam Sung, Honda Trading, Honda VN
NUMBER OF EMPLOYEES:
POSITION:
300
Sales Officer
CHARTER CAPITAL (USD):
FAX:
9,000,000
+84-222-377-4899
QUALITY CERTIFICATES: ISO 14001:2004, OHSAS 18001:2007
FACTORY ADDRESS:
OFFICE ADDRESS:
Ngoc Kham Village, Gia Dong Commune, Thuan Thanh Dist., Bac Ninh Province
Ngoc Kham Village, Gia Dong Commune,Thuan Thanh Dist., Bac Ninh Province
MAIN TECHNOLOGY:
WEBSITE:
Materials(Metal)
http://thuanthanhenco.com/vn
INCOME OF NEAREST YEAR (USD):
EMAIL:
N/A
We have introduced technology of SANKO CO.,LTD(shizuoka prefecture) which is doing this business for more than 60 years in japan.
VN 41
ORGANIZATION 53
VIETNAM - JAPAN
- Supporting industries exhibitionJAPAN INTERNATIONAL COOPERATION AGENCY (JICA )
CONTACT INFORMATION
VIETNAM TRADE PROMOTION AGENCY (VIETRADE )
CONTACT INFORMATION
ORGANIZATION ACTIVITIES
Since joining the Colombo Plan in 1954, Japan has been providing financial and technical assistance to developing countries through ODA.JICA is in charge of Japanese ODA such as technical cooperation.
11th Floor, CornerStone Building, 16 Phan Chu Trinh Street, Hoan Kiem District, Hanoi Tel: +84-24-3831-5005Fax: +84-24-3831-5009
JICA Viet Nam Office Ho Chi Minh City Branch Website
JICA Viet Nam OfficeNo. 905, 9th Floor, Saigon Riverside Office Center, 2A-4A Ton Duc Thang Street, Ben Nghe Ward, District 1, Ho Chi Minh CityTel: +84-28-3827-4942Fax: +84-28-3827-4943
http://www.jica.go.jp/vietnam/index.html
JICA is supporting the development of Small and Medium Enterprises (SMEs) and Supporting Industries (SIs) which is one of the essential issues for the achievement of promotion of economic growth and international competitiveness of Vietnam.
JICA has started new ODA program - Japanese Enterprises Proposing Program. Through this program, JICA supports Japanese enterprises expanding their businesses in Vietnam and& , as a result, JICA expects the process of solving development challenges/issues in Vietnam will be accelerated.
1. JICA’s activities for SME/SI development in Vietnam 2. JICA’s activities for Japanese enterprises to solve development issues of Vietnam
20 Ly Thuong Kiet Str., Hanoi Tel: +84-24-3824-5959 Fax: +84-24-3936-1311 E-mail: [email protected]
COMMUNICATION TELEVISION CENTER OF INDUSTRY AND TRADE
7th floor, MOIT building, 655 Pham Van Dong Str., HanoiTel: +84-24-6686-6815 +84-24-6686-6819 E-mail: [email protected]
INFORMATION TECHNOLOGY ANDE-COMMERCE DEPARTMENT
20 Ly Thuong Kiet Str., Hanoi Tel: +84-24-3826-2266 Fax: +84-24-3826-2255E-mail: [email protected]
INVESTMENT PROMOTION CENTER FORINDUSTRY AND TRADE
20 Ly Thuong Kiet Str., Hanoi Tel: +84-24-3934-7628 Fax: +84-24-3934-8142 E-mail: [email protected]
20 Ly Thuong Kiet Str., Hanoi Tel: +84-24-393-4792 Fax: +84-24-393-4793E-mail: [email protected]
132 Nguyen Chi Thanh Str., Da Nang Tel: +84-236-3384-3443 Fax: +84-236-3384-3442 E-mail: [email protected]
HA NOI HEAD OFFICE EXPORT PROMOTION CENTER DA NANG CITY OFFICE
Level 9, 12 Nguyen Thi Minh Khai St., Da Kao Ward, Dist.1, Ho Chi Minh City Tel: +84-28-3829-7282 Fax: +84-28-3914-0549E-mail: [email protected]
HO CHI MINH CITY OFFICE 545 Fifth Avenue, Suite 1109, NY 10017, USA Tel: +1-21-2868-2686 Fax: +1-21-2868-2687 E-mail: [email protected]
No.10, 12th floor, Fuli Haiyang Guoji Building, Beichengtian Road, Jiangbei District, Chongqing City, China Tel: +86-23-6790-6219 Fax: +86-23-6790-8285E-mail: [email protected]
VIETRADE OFFICE IN NEW YORK VIETRADE OFFICE IN CHONGQING
VIETRADE is a Governmental organization under the Ministry of Industry and Trade responsible for the promotion of trade and investment, boosting industry and trade development in Vietnam. VIETRADE works closely with various local trade promotion centers, trade associations, trade support institutions and international trade promotion organizations in helping domestic and foreign enterprises to establish and expand their business.
Industrial human resources developmentA)B)C)
D)
Establishment of skill testing systemLectures for Vietnamese companies on Japanese business managementManufacturing technique transfer to Vietnamese companies
E) Improving Foreign Direct Investment policies
Basic surveyA)B)
C)
D)
Feasibility Survey for the private sector for utilizing Japanese technologies in ODA projectPreparatory Survey for Sustainable Development Goals (SDGs)Verification Survey with the private sector for dissemination Japanese technologies
E) Collaboration Program with the Private Sector for Disseminating Japanese Technology
ORGANIZATION
ORGANIZATION
ORGANIZATION54
VIETNAM - JAPAN
- Supporting industries exhibition
JAPAN EXTERNAL TRADE ORGANIZATION (JETRO )
CONTACT INFORMATION
ORGANIZATION ACTIVITIES
Japan External Trade Organization is a Governmental-related Organization under the Ministry of Economy, Trade and Industry of Japan (METI). With about 40 regional offices throughout Japan and over 70 overseas offices in the world, JETRO’s main function is to promote mutual trade and investment between Japan and the rest of the world. In the 21st century, JETRO has shifted toward strengthening foreign direct investment (FDI) into Japan and helping Japanese firms, especially SMEs expand their businesses into overseas markets. With the aim of contributing to further development of economic relations between Vietnam and Japan and to the achievement of the prosperity in the region, the Representative Office in Hanoi has been conducting and involving in many various activities that brought mutual benefits to entrepreneurs of the two countries since its establishment in 1993.
9F, Corner Stone Building, 16 Phan Chu Trinh, Hoan Kiem Dist., Hanoi City, VietnamTel: +84-24-3825 0630 Fax: +84-24-3825 0552E-mail: [email protected]
WebsiteJETRO HANOI OFFICE JETRO HO CHI MINH OFFICEhttp//:www.jetro.go.jp Floor 14, Sun Wah Tower, 115 Nguyen Hue Str.,
Dist.1, Ho Chi Minh City, VietnamTel: +84-28-3821 9363 Fax: +84-28-3821 9362E-mail: [email protected]
Offer expert consultation with the latest legal writings and information relating to tax, customs, labor and investment procedures to Japanese investors who wish to invest or do business in Vietnam.
Organize an exhibition on supporting industries to match Japanese buyers with Vietnamese sellers.
Provide Japanese investors particularly SMEs with office space and facilities free of charge to promote their business and investment in Vietnam.
React to inquiries from local and Japanese companies seeking information about potential partners.
Make a comparative survey of investment-related costs in major cities in the region and in Asia every year.
Receive Japanese study missions to Vietnam for investment and business opportunities in Vietnam.
Hold workshops guiding new laws and regulations on Vietnam’s business and investment issues for existing Japanese enterprises who are operating in Vietnam.
Hold business matching between Japanese and Vietnamese enterprises in various fields.
Create business chances for Vietnamese importers by inviting them to visit specialized trade fairs and production bases in Japan in fields of foodstuff, beverage, agriculture and supporting industries.
Conduct an annual survey of current operation of the Japanese-affiliated firms in Asia and Oceania.
ORGANIZATION