metal gutting
TRANSCRIPT
Metal Gutting Circular Sawfor Sheet-Metal Sections
for cutting all sizes ofsheet-metal flanges in theheating and ventilationindustry
With special double-grip viceand profiled jaws equipment
Shown:Version Bwith air controlled automatic viseclamping by a control valve behindthe saw head. Complete with airpressure lubrif icator-regulator.
Model Ho
HABERLE@ is a registered trade name ot Franz HEiberle Maschinenfabrik, Gaggenau/Germany. . . . a pfOdUCt Of WeSt Gefmany
Tech n ical specificationsSafety Sawblade GuardThe link operated twin guard covers the whole sawblade whenthe machine is not actually cutting and opens when the machinehead is moved downwards.
MotorWhen ordering please specify voltage and cycle of your current.50 Hz: Standard 3-phase 1400/2800 rpm,0.7511 HP
Optional 3-phase 700/1400 rpm, 0.6/0.9 HPOptional 1-phase 1400 rpm,0.75 HP1 -phase 2-speed motor upon request
60 Hz: Standard 3-phase 1700/3400 rpm,0.7511 HPOptional 3-phase 850/1700 rpm,0.6/0.9 HPOptional 1-phase 1700 rpm,0.75 HP
Sawblade Speeds50 Hz: 25 rpm with motor speed 700 rpm
50 rpm with motor speed 1400 rpm100 rpm with motor speed 2800 rpm
60 Hz: 30 rpm with motor speed 850 rpm60 rpm with motor speed 1700 rpm
120 rpm with motor speed 3400 rpm
Cutting Range
with sawblade 250 mm Teeth
O 3" dia.n 2'/ox2t/0"
O 2" dia. mild steel
160160/200160/20080
Main SwitchThe front mounted main switch is supplied with Emergency Off pushbutton and thermic motor overload protection.
Drive UnitThe robust worm and wheel drive runs in an oil bath.Thehardened and ground worm is mounted in bearings at bothends. The main spindle is of heavy construction, and thewheel is made of special bronze material, guaranteeing longlife.
Glamping UnitThe manual or pneumatic double-grip vice holds the mate-rial on both sides of the sawblade, to ensure a burr-free cut.
Goolant SystemA removable reservoir for coolant and a separate swarf-drawer is provided in the machine base. The diaphragmpump ensures good cooling.
Sawblades H.S.S.250 x 2.0 x 40 mm, with 1 10, 160 or 200 teeth;225 x 1.6 x 40 mm, with 220 teeth for flanges.Two pin holes 8 mm dia. on cycle 55 mm dia.
Dimensions and WeightsMachine unpacked: 470 x750 x 950 mm, 96 kgMachine in carton: 480 x 980 x 570 mm, 116 kgFabricated stand: 420 x 585 x 580 mm, 22 kg
Standard EquipmentProfiled jaws equipment for the flanges, operating wrenches,ooerator's manual.
Optional EquipmentFabricated machine stand: sawblades; concentrated coolanttluid;24 Volts switch in the handle; material carriers; lengthstops
Fabricated iron stand
Length stop 1 000 mm, ungraduated
Length stop 1500 mm,with mm-scaleLength stop 3000 mm,with mm-scale
Modifications of the construction reserved Printed in West Germany