Compartments Partitions Cubicles Screens

Metal Toilet Partitions

SECTION 10160 | Metal Toilet Partitions

Since 1975, Shanahan’s has been manufacturing one of the most durable toilet partition products available. Our products are designed with classic, clean lines and are built to last for many years.

Metal Toilet Partitions

Unlike most other toilet partition product lines, which are made with two identical pans connected along the edge using a separate spline, our partitions are designed from two pans with interlocking sides that snap together during assembly. The corners of the panels and doors are then welded and finished. This edge design creates a very strong door/panel/pilaster. Unlike many manufacturers of toilet partitions who produce 1-1/4” thick pilasters and 1” thick doors and panels, Shanahan’s produces pilasters, doors and panels all to be 1-1/4” thick.

This product is suitable for installation in virtually any type of facility and is a very good choice for washrooms that are subjected to high use.

Our standard products are powder coated and we offer 30 standard and eight premium colour choices, including textured finishes. With their sleek appearance, and long-lasting durability, Shanahan’s toilet partitions are the best choice for your facility.

1

2

O.B. Overhead Braced Model• TheO.B.Modelisrecommendedforitsdurability

and economy.

• Theoverheadrailensuresarigidandstablecompartment.

• Themodelismostpopularinschools,restaurantsandpublic washrooms.

• Thegalvannealfloorchannelprovidesasimpleyetfirmplatform for the easily adjustable pilaster.

18"

46"

END ELEVATION

12"

58"

12"

1 PILASTER

2 DOOR

3 PANEL

4 HEADRAIL

5 SHOES

3

4

2

1

1 2

5 5 55

FRONT ELEVATION

41 1

ANODIZED ALUMINUMANTI-GRIP HEADRAIL

FLOOR CHANNELALLOWS ADJUSTMENTOF PILASTER

PILASTER WITHHONEYCOMB CORE

#12 x 5/8"PAN HEADSHEET METAL SCREW

#12 x 5/8"PAN HEADSHEET METAL SCREW

#12 x 1-1/2"PAN HEADSHEET METAL SCREWWITH EXPANSION ANCHOR

STAINLESS STEEL SHOE

SECTION THROUGH PILASTER

FOR OPTIMUM STRENGTHAND SAFETY, INSTALL WOOD BLOCKING IN HOLLOW WALLS (DRYWALL).

Metal Toilet Partitions

C.H. Ceiling Hung Model• Theunobstructedfloorareamakescleaningeasierandmaintenancesimpler.

• Thepilastersaresuspendedfromstructuralsupportsabovethefinisheddroppedceilingwith threaded rods.

• Recommendedinareaswhereeaseofcleaningisimportant.Maximumrecommendedheight is 8’0”. Not recommended where doors and panels are in the same plane (alcove compartments).

• Typicalinstallationsarehospitalsandofficebuildings.

18"

46"

END ELEVATION

1 PILASTER

2 DOOR

FRONT ELEVATION

12"

58"

SMLRECOMMENDS

MAXIMUMHEIGHT

OF8' 0"

3 PANEL

4 SHOE

3

4 4 4

1

2 2

1 1 1

FOR OPTIMUM STRENGTHAND SAFETY, INSTALL WOOD BLOCKING IN HOLLOW WALLS (DRYWALL).

F.B. Floor Braced Model• Flushtopgivesamodern,uniformappearance.

• Stabilityisachievedbyanchoringthepilastertothefloorwiththreadedrodsandexpansion anchors.

• Recommendedinareaswhereoverheadbracingisnotdesirableandwhereinstallationof ceiling hung compartments are not practical due to the height of the ceiling.

• Idealforofficebuildings.

18"

46"

END ELEVATION

FOR OPTIMUM STRENGTHAND SAFETY, INSTALL WOOD BLOCKING IN HOLLOW WALLS (DRYWALL).

12"

58"

3 21

1

4 4 44

FRONT ELEVATION

1 2 1

1 PILASTER

4 SHOES2 DOOR

3 PANEL

THREADEDRODAND NUTSALLOWADJUSTMENTOF PILASTER

PILASTERWITHHONEYCOMBCORE

EXPANSIONANCHOR

STAINLESSSTEELSHOE

SECTION THROUGH PILASTER FRONT ELEVATION/DETAIL

12Ga STEELSUPPORT BRACKETWELDED TOPILASTER

3

THREADEDRODAND NUTSALLOWADJUSTMENTOF PILASTER

PILASTERWITHHONEYCOMBCORE

STRUCTURALSUPPORT(BY OTHERS)

STAINLESSSTEELSHOE

SECTION THROUGH PILASTER FRONT ELEVATION/DETAIL

12Ga STEELSUPPORT BRACKETWELDED TOPILASTER

FINISHEDCEILING

5

4

FLOOR CHANNELALLOWS ADJUSTMENTOF PILASTER

PILASTER WITHHONEYCOMB CORE

SHOE, CHANNEL ANDFASTENERS AS PERFLOOR CONNECTION

#12 x 5/8" PAN HEADSHEET METAL SCREW

#12 x 1-1/2" PAN HEADSHEET METAL SCREWWITH EXPANSION ANCHOR

STAINLESS STEEL SHOE

SECTION THROUGH PILASTER

#12 x 1-1/2" PAN HEADSHEET METAL SCREWINTO BLOCKING

F.C. Floor and Ceiling Braced Models• Whereoptimumsupportisrequiredandabusecan beexpected,theF.C.Modelisrecommended.

• Thepilastersareattachedtothefloorandceilingusinggalvanneal steel channels, which are identical tothetypeusedfortheO.B.Model.

Doors, Panels and Pilasters

All steel is 20Ga galvanneal to avoid corrosion. All doors, panels and pilasters are fabricated to an overall thickness of 1-1/4”.

Self-locking EdgesDoors, panels and pilasters are all fabricated as pans with formed interlocking edges that snap together when assembled. This provides a very strong, double-thickness perimeter on the doors and panels. All corners are then welded and finished.

CoreForuniformflatness,a1-1/4”cellsizepaper honeycomb core is bonded to the steel faces using a specially designed adhesive.

An optional plywood composite solid core is available.

Anti-grip HeadrailTheclearanodizedaluminumheadrailfits over the pilaster and is secured to the wall with support brackets.

HardwareChrome-platedzincdiecastings(Zamac)arestandardonall models. See page 10 for all stock hardware.

STANDARD FEATURES

202 Surf White

301 Grey

385LondonFog389Fieldstone

820 Delph

260 Offsprey

584 Steel Grey

101 White

871 Kindling Wood

706Beige

1050AntiqueBronze

1015 Desert Stone

821 Plantation

720 Sand

310 Stone

All steel surfaces are cleaned and degreased in an automatic wash process and then iron phosphatised for positive paint adhesion. Doors, panels and pilasters are then powder coated in any of our 38 standard colours (custom colours available).

• Anti-graffiticoatingsareavailable.

• Customcoloursareavailablesubjectto minimumquantities.

• Coloursshownarefordemonstrationpurposes.Contact Shanahan’s for our Colour Selector.

100 Pure White

410 Teakwood

908Black

1001Rust

807Blue

200 Cadet Gray

325 Hemlock

800 Ultra Marine

1002 Pewter

600 Green

1059BengalSilverMetallic

970 Dawn

315NesikaBay

220 Slate

1820AntiqueSilver

1430 Textured White

403 Yellow

270 Sunset

415 Northern Star

560Burgundy

1250MidnightBlack

390 Coffee

504Red

Standard Finishing

Premium Textured Finishing

Powder Coated Finish

5

6

Shanahan’s manufactures additional height doors and panels (64” and 72”) to maximize user privacy. For complete privacy, a series of special components are available, which when installed eliminate any visible spaces between doors and pilasters, as well as pilasters and panels.

• HingeFiller:aluminum(suitableforpowdercoating or can be polished for stainless steel applications).

• DoorStop:aluminum(suitableforpowdercoating or can be polished for stainless steel applications).

• “F”Channel:galvannealsteelorstainlesssteel.

• “U”Channel:galvannealsteelorstainlesssteel.

Continuous Doorstop ContinuousHingeFiller

4

31

7

8

6

2 5

7

FULL PRIVACY SERIES COMPONENTS

1. CONTINUOUS DOOR STOP2. CONTINUOUS HINGE FILLER3. CONTINUOUS “U” CHANNEL4. CONTINUOUS “T” CHANNEL5. CONTINUOUS “F” CHANNEL6. DOOR7. PILASTER8. PANEL

Maximum Privacy Series

Stainless Steel ConstructionAll of Shanahan’s toilet compartments are available in type 304 stainless steel finish. Stainless steel is of premium qualityconstruction,whichoffersexceptional longevity with unsurpassed corrosion resistance.

Maintenance is greatly reduced as nopartsrequirepainting.Andthegleaming appearance will suit most of today’s decors.

• DairyandBeverageareas

• Distilleries

• FoodProcessing

• Hospital/Laboratory

• Hotels

• IceandRollerRinks

• LeisureCentres

• MeatPackingPlants

• MilitaryBases

• PublicShowers

• SportsArenas

• SwimmingPools

#4Finish

Ideal for installations where the highest degree of cleanliness and corrosion resistance is of prime importance,includingthefollowingareas:

STAiNlESS STEEl FiNiSH oPTioNS

APPliCATioNS moDElS AvAilAblE

• O.B.OverheadBraced

• F.B.FloorBraced

• C.H.CeilingHung

• MaximumPrivacy

Leathergrain#2BFinish60-Lth Rigidized#4Finish5-WL

SPlASH PANElS

Type 304-4 brushed stainless steel for additional protection adjacent to urinals.

STAiNlESS STEEl HARDWARE

Hardware is available in stainless steel, surface mounted only.

7

8

Model “WH” Wall Hung• Chromewalland“wing”brackets

• Screen18”or24”widex42”high

Model “FB” Floor Braced• 70”highanodizedaluminumpost

• Chromeflangeandbrackets

• Custompanelwidth(standardheightis58”)

24"

30"

18"

42"

18" or 24"

70"

58"

1-3/4"SQUARE POST

PANEL WIDTHTO SUIT

46"

18"12"

18"

46"

PANEL WIDTHTO SUIT

1-3/4"SQUAREPOST

12"

58"

10' 0"MAX. HT.

Model “FC” Floor to Ceiling Post• 120”highanodizedaluminumpost

• Chromeflangeandbrackets

• Custompanelwidth(standardheightis58”)

FOROPTIMUMSTRENGTHANDSAFETY,INSTALLWOODBLOCKINGINHOLLOW

WALLS(DRYWALL).

Vision and Urinal Screens

oPTioNS• Vinyl or duck shower curtains • Chrome shower rods • Concealed curtain track • Cedar or maple • 64”/72” high panels

18"

46"

BACKING HEIGHTSFOR MOUNTING BRACKETS

TS-140 AND TS-150HINGE BRACKETS

TS-130STRIKE AND KEEPER

TS-120COMBINATIONHOOK/BUMPER

TS-110-1CONCEALEDLATCHASSEMBLYPILASTER DOOR

1" SPACEMAXIMUM

LATCH BOLT

#12 x 2" PAN HEADSHEET METAL SCREW

(TYPICAL)

#12 x 5/8" PAN HEADSHEET METAL SCREW

(TYPICAL)

1"

ALL DOORS, PANELS AND PILASTERS ARE 1-1/4" THICK

TS-200"U" BRACKET

USE WALL ANCHORSIN CONCRETE ORMASONRY WALLSONLY

TS-100"F" BRACKET

PILASTER

PANEL

FOR OPTIMUM STRENGTHAND SAFETY, INSTALL WOOD

BLOCKING IN HOLLOW WALLS (DRYWALL).

IN CORNER

57"to60"

32"to36"

BETWEEN WALLS

57"to60"

32"to36"

FREE STANDING

57"to60"

32"to36"

ALCOVE - OPEN END

32"MINIMUM

60"to

120"

ALCOVE - BETWEEN WALLS

32"MINIMUM

60"to

120"BARRIER-FREE COMPARTMENTS

CHECK YOUR LOCAL REGULATIONS FOR MINIMUM REQUIREMENTS FOR TOILET COMPARTMENTS FOR THE DISABLED.

18"

46"82"

CONCRETE CURB(OPTIONAL – BY OTHERS)

36" 36"

58"

36" 36" 36" 36"

END ELEVATION PLAN VIEW

BENCH(OPTIONAL)

36"

CURTAIN(OPTIONAL)

12"

TyPiCAl CRoSS-SECTioN AND DETAil

TyPiCAl ToilET ComPARTmENT lAyoUTS

SHoWER AND DRESSiNg ComPARTmENTS

9

10

SpecificationsMetal Toilet Partitions

PANEl AND PilASTER bRACKETS

1-1/4”PANEL&PILASTERTOWALLBRACKET 1-1/4”PANELTOPILASTERBRACKET ALCOVELBRACKET

TS-100 TS-200 TS-140-1

PilASTER HARDWARE

CEILINGHUNGPILASTERANCHORKIT FLOORBRACEDPILASTERANCHORKIT

STAINLESS STEEL SHOES

TCH-700 TFb-450 TS-XX

CoNCEAlED DooR HARDWARE

CONCEALEDINDICATORLATCHASSEMBLY STRIKEANDKEEPER

TS-110 TS-130

LOWERHINGEASSEMBLY UPPERHINGEASSEMBLY

TS-140 TS-150

SURFACE DooR HARDWARE

SURFACELATCH SURFACESTRIKEANDBUMPEREMERGENCYACCESS

FLIPLATCH SURFACEMOUNTEDHINGES

TS-300 TS-401 TS-400-4 TS-234 (lH) and TS-235 (RH)

DooR HARDWARE ACCESSoRiES

COATHOOKANDBUMPER DOORPULL

TS-120 TS-211

HEADRAil AND HEADRAil bRACKETS

ALUMINUMANTI-GRIPHEADRAIL HEADRAILENDCAP HEADRAILBRACKETS HEADRAILCONNECTOR

THR-XX TS-160 TS-170 TS-165

SHoWER AND CHANgE STAll HARDWARE

CONCEALEDTRACKANDHOOK SHOWERRODFLANGE SHOWERCURTAINHOOK TRIANGULARSUPPORTFOR

WOOD SEAT

TS-210 TS-302 TS-203 TS-201-1

SCREEN HARDWARE

POSTFLANGE POST CAP WINGBRACKET

TS-169 TS-190 TS-2500

All standard door, panel and pilaster hardware are chrome-plated zinc die castings (Zamac). Brackets, concealed door hardware, shoes and headrail are manufactured to fit Shanahan’s 1-1/4” square edge. Replacement and special parts are available upon request.

POWder COaTed TOileT ParTiTiOnS ____MATERIALAll sheet metal to be galvanneal steel to ASTM #A653 ZF 120 (A40).

DOORS AND PANELSTo be 1-1/4” (32 mm) thick. Constructed of two sheets galvanneal steel, minimum 20Ga. The sheets are to be cemented under pressure to a honeycomb core. The sheets are to be formed and finished with continuous self-locking edges with the corners mitred, welded and ground smooth. Height of doors and panels to be 57-1/2” (1461 mm) high.

PILASTERS—OVERHEAD BRACED (O.B.)To be manufactured using the same materials and fabrication as outlined in doors and panels. Height of pilasters to be 81” (2057 mm). A 16Ga galvanneal steel floor channel is to be fastened to the floor with expansion anchors. The pilaster is to be positioned over the floor channel and fastened with sheet metal screws to the channel. 4” (102 mm) high shoes to be manufactured of type 304 #4 finish stainless steel to ASTM #A240 minimum 20Ga with continuous self-locking edges (fasteners are not required).

PILASTERS—FLOOR BRACED (F.B.)To be manufactured using the same materials and fabrication as outlined in doors and panels. Height of pilasters to be 70” (1778 mm). The top of the pilaster is to be formed the same as the sides. The bottom of the pilaster is to be reinforced with minimum 11Ga carrying channel secured to the floor with concrete expansion anchors. Stainless steel shoes same as for O.B. pilasters.

PILASTERS—CEILING HUNG (C.H.)To be manufactured using the same materials and fabrication as outlined in doors and panels. Maximum height for pilasters to be 120” (3048 mm). The bottom of the pilaster is to be formed the same as the sides. The top of the pilaster is to be reinforced with minimum 11Ga carrying channel and prepared for ceiling connection. Stainless steel shoes same as for the O.B. pilaster.

HEADRAILSTo be clear anodized alloy and temper 6063T5, anti-grip design. The outer flanges are to fit over the facing of the pilaster. The headrail is to be supported at the wall with aluminum painted Zamak support brackets.

HARDWAREAll door hardware, panel and pilaster brackets to be chrome-plated zinc die castings (Zamac).

Door hinge housings to be recessed into door for extra strength and flush appearance. 3/8” (9.5 mm) cold-rolled steel threaded barrel pin to secure top hinge to door (plastic is not acceptable). Gravity door hinges to be adjustable for any position.

Concealed door latch shall be vandal-proof and accessible from the exterior in emergencies. The slide latch with knob is suitable for persons with disabilities (easy to grasp with one hand and does not require tight grasping/pinching, or twisting of the wrist). The door swing is to be interchangeable by reversing the door latch.

Combination doorstop and keeper to have slotted hole for latch bolt. A continuous black rubber bumper is to be integral with the doorstop.

Combination coat hook and bumper to be supplied for each door. Fitted with black rubber bumper.

Hardware

STAiNlESS STEEl HARDWARE

Hardware is available in stainless steel, surface mounted only.

Distributed by

www.shanahans.com