metro fires...710w x 582d x 722h metrofires.co.nz 2020 wood fire range 7 xtreme ped ht clean air...

Metro Fires Product range

Keeping warm during winter is a basic need we all share, and the natural warmth, comfort and ambience from a flickering fire is the nicest way to keep your home warm, dry and healthy.

Metro Fires are a family owned and operated New Zealand company with a long family history and we value our unique ‘family-based’ culture. We support local industry and New Zealand’s future by designing and manufacturing our products right here in New Zealand.

Our commitment to deliver the best heating solutions and keep New Zealand homes warm and dry has seen our range grow from a single model to New Zealand’s most extensive range of wood fires and complementary heating products.

We know you’ll love the warmth, comfort and quality of a New Zealand made Metro fire.

A warm welcome from Metro fires

PROUD TO BE NZ MADE

PREMIUM FIREBOX WARRANTIES

25 YR GENUINE PARTS SUPPLY

2020 WO O D F IRE R A N GEME T R O F IRE S .CO.NZ 1

Proudly New Zealand made Supporting our people and our country

DOOR GL A SS

Large 5mm Robax German made ceramic glass window provides enhanced flame view

FIREBOXES

Fireboxes are fabricated from quality NZ made

6mm steel plate

ROBOTIC WELDING

Firebox and outer panels welded using the latest robotic techniques to

stringent quality control standards

OUTER PANEL S

Fabricated from quality NZ made steel

SOLID COOK TOP S

Firebox tops, single or twin layers of 6mm, 8mm or 10mm

quality NZ made steel

SINGLE & T WIN BAFFLES

6mm thick NZ made steel baffle plates

Baffle linings of quality engineered high temperature

calcium silicate board

QUALIT Y COATINGS

All coatings are high temperature metallic black paint or NZ applied

vitreous enamel

FIRE BRICK S

25mm thick masonry refractory composite Metro

side wall fire bricks

LEG, PEDES TAL AND WOODS TACKER OP TIONS

Key models are offered in three configurations with the

remainder of the range featuring either legs or pedestal base

2020 WO O D F IRE R A N GE ME T R O F IRE S .CO.NZ2

The three key factors to consider when choosing a wood fire are the installation options, correct model selection and achieving a safe, compliant installation.

The right size Metro fire for your home and heating requirements with correct operation and good dry fuel will provide many years of warmth and reliable heating.

INSTALLATION OPTIONS

Decide on the type of installation you need and confirm if your home is located within a clean air zone or specified airshed. This will determine the type of Metro model you can install. Your Metro retailer or local council can advise of any specific emission requirements for your area.

MODEL SELECTION

Select the right size Metro fire and flue system with the heating accessories you will need. Your retailer or installer can guide you in choosing the best model and most suitable location for installation to ensure optimum heat delivery is achieved. They can also help manage the council consent process through to completed installation.

SAFETY AND COMPLIANCE

We recommend you have your new Metro fire installed by a NZHHA registered or suitably qualified installer. It is critical that the specified clearances, flue system and floor protector requirements are correct for a safe and compliant installation.

Choosing a fire Where to start?


CLEAN AIR APPROVED

These models are suitable for any size property and can be installed into a clean air zone anywhere in New Zealand, unless more stringent regional rules apply.

Clean air models comply with the Ministry for the Environment (MfE) National Environmental Standards (NES). NES require less than 1.5gms of particles for each kilogram of dry wood burned (g/kg) and a minimum thermal efficiency of 65%.

The majority of the Metro clean air approved models are also NES compliant with a wetback fitted.

ULTRA LOW EMISSION

ULEB is an acronym for ‘Ultra Low Emission Burner’. Put simply, they are some of the cleanest solid fuel burners on the market with incredibly low emissions.

Tested using the real-life operating test conditions of Canterbury Method (CM1), Metro Ultra Fires meet the Environment Canterbury emission and efficiency standards as well as the MfE National Environmental Standards.

Approved to install anywhere in New Zealand including the Canterbury, Nelson and Rotorua regions.

LTD RURAL (2Ha+)

LTD models are specifically designed for lifestyle and rural properties and can only be installed on a property with a land area of two hectares or greater.

The main benefit of an LTD model is the responsive control of burn rate allowing overnight burning capabilities with correct operation.

The unique firebox design delivers longer burn times and all models can be fitted with either a 3kW or 4kW wetback ensuring winter warmth, cooking and water heating are all dominant features.

FREESTANDING

Freestanding models are installed against a wall or into a corner situation with the ECO flue kit.

BUILT-IN

Built-In models are ‘built’ into a timber framed cavity and installed with the ECO Built-In flue kit.

INSERT

Insert models are ‘inserted’ into an existing masonry chimney and installed with the ECO Insert flue kit.

INS TALL ATION OP TIONS

MODEL OP TIONS

CLEAN AIR

ULTRA LOW

LTD RURAL

2HA+


Product overview

Heat output

Heating area

Wetback option

Page no.

T INY PED

11kW 120m2 ✓ 8

TINY R AD

11kW 120m2 ✓ 8

TINY R AD WOODY

11kW 120m2 ✓ 8

WEE R AD BA SE

15kW 150m2 ✓ 11

WEE R AD LEG

15kW 150m2 ✓ 11

WEE R AD WOODY

15kW 150m2 ✓ 11

WEE PED

15kW 150m2 ✓ 11

X TREME R AD BA SE

20kW 220m2 ✓ 13

X TREME R AD LEG

20kW 220m2 ✓ 13

Heat output

Heating area

Wetback option

Page no.

X TREME R AD WOODY

20kW 220m2 ✓ 13

X TREME PED

20kW 220m2 ✓ 13

AMBIE ONE

15kW 150m2 * 15

AMBIE PLUS

20kW 220m2 ✓ 15

CL A SSIC R AD

17kW 170m2 ✓ 16

MEGA R AD

24kW 280m2 ✓ 17

TREND INSERT

15kW 150m2 * 22

SMART INSERT

15kW 150m2 ✓ 23

MEGA SMART BUILT-IN

20kW 220m2 ✓ 25

* Wetback options are only available for properties with a land size of 2Ha or greater.

Clean air approved models


Heat output

Heating area

Wetback option

Page no.

LTD WEE R AD BA SE

15kW 150m2 ✓ 18

LTD WEE R AD LEG

15kW 150m2 ✓ 18

LTD WEE R AD WOODY

15kW 150m2 ✓ 18

LTD X TREME R AD BA SE

20kW 220m2 ✓ 18

LTD X TREME R AD LEG

20kW 220m2 ✓ 18

LTD X TREME R AD WOODY

20kW 220m2 ✓ 18

LTD MEGA R AD

24kW 280m2 ✓ 19

LTD TREND INSERT

15kW 150m2 ✓ 22

LTD SMART INSERT

15kW 150m2 ✓ 23

Heat output

Heating area

Wetback option

Page no.

ULTR A WEE R AD

15kW 150m2 11

ULTR A X TREME R AD

20kW 220m2 13

ULTR A INSERT

15kW 150m2 24

OUTDOOR FIRES

26

ECO FLUE S YS TEMS

28

FLOOR PROTEC TORS

32

HE AT TR ANSFER S YS TEMS

36

INSERT/BUILT-IN SPECS

38

FREES TANDING SPECS

40

LTD rural models (2Ha+) Ultra low emission models


WHAT IS A ULEB?ULEB is an acronym for ‘Ultra Low Emission Burner’. Put simply, they are some of the cleanest solid fuel burners in the world with incredibly low emissions.

EC AN APPROVEDULEBs are tested using the real-life operating test conditions of Canterbury Method (CM1) and must meet the Environment Canterbury emission and efficiency standards.

MFE APPROVEDMetro Ultra Fires meet the MFE NES compliance and can be installed anywhere in New Zealand including the Canterbury, Nelson, and Rotorua regions.

Metro Ultra Fires Ultra low emission

ULTR A INSERT

15kW peak heat outputConvection fan for added efficiency

Metallic black paint or Gloss black enamel finish

ULTR A WEE R AD

15kW peak heat output Convection fan for added efficiency

Metallic black paint finish615W x 515D x 691H

ULTR A X TREME R AD

20kW peak heat output Convection fan for added efficiency



X TREME PED HT

Clean air approved model20kW peak heat output

Heat up to 220m2 (4 bdrm home)Metallic black paint finish

WEE PED HT


Heat up to 150m2 (3 bdrm home)Metallic black paint finish

SMART INSERT HT


Heat up to 150m2 (3 bdrm home)Metallic black paint finish fascia

Wee Ped15K W PACK AGE ✓ Wee Ped HT wood fire✓ Standard freestanding flue kit✓ Pioneer double flue shield✓ 10 year firebox warranty

FIRE $1749S TD FLUE KIT $749FLUE SHIELD $125

TOTAL RRP $2623

PACK AGE DE AL

$2199

Smart Insert15K W PACK AGE ✓ Smart Insert firebox✓ Smart Insert HT fascia✓ Standard insert flue kit✓ 10 year firebox warranty

FIREBOX $1791HT FA SCIA $957S TD INSERT KIT $499

TOTAL RRP $3247

PACK AGE DE AL

$2749

Xtreme Ped20K W PACK AGE ✓ Xtreme Ped HT wood fire✓ Standard freestanding flue kit✓ Pioneer double flue shield✓ 10 year firebox warranty

FIRE $2549S TD FLUE KIT $749FLUE SHIELD $125

TOTAL RRP $3423

PACK AGE DE AL

$3099

Metro Package Deals Hot favourites for winter

The Smart package is suitable for masonry chimney installations only. Prices shown above are for the listed package contents only and are correct at time of printing. Pricing may be subject to change, please confirm pricing with your Metro retailer. Installation and council consent costs are not included.

Our cost effective package deals include everything you need to be cosy and warm this winter. Package up and save on these hot deals designed to suit all budgets.


TINY PED

Clean air approved model Metallic black paint finish

Optional 2kW wetback496W x 492D x 659H

TINY R AD



TINY R AD WOODY


Optional Side wetback515W x 498D x 758H

Designed for heating smaller homes and open areas. The Tiny series models feature surprisingly large volume fireboxes for compact sized fires and punch well above their weight with a peak heat output of 11kW. The Tiny Ped requires the smallest installation footprint with minimal corner and wall clearances of only 25mm and 60mm respectively.

Cook your favourite soup or boil the kettle on the flat cooktop of the radiant models. All Tiny series models can also be fitted with a wetback to assist with water heating requirements. Small versatile fires that will provide many years of warmth and comfort.

Tiny series 11kW HE AT UP TO 120m2 (2-3 BEDROOM HOME)


T IN Y R A D WO O DY / SL IML INE SM A L L WA L L F LO O R P R OT EC TO R


W EE R A D B A SE / SL IML INE MEDIUM WA L L F LO O R P R OT EC TO R


WEE PED VE

Clean air approved model Gloss black enamel finish


WEE PED HT



ULTR A WEE R AD

Ultra low emission model Metallic black paint finish

Convection fan for added efficiency615W x 515D x 691H

WEE R AD BA SE



WEE R AD LEG



WEE R AD WOODY



Wee series models are MfE clean air approved with a choice of pedestal base, leg and wood stacker configurations. The Wee Rad models feature flat radiant cooktops with ample space for cooking. The Wee Ped convection model is available in both metallic black paint and gloss black enamel finish.

The clean burning design delivers an impressive peak output of 15kW to heat your home with the generous door glass providing the perfect flame view to enjoy on cold winter nights. All models (excluding the Ultra) can be fitted with a Side wetback to assist with water heating requirements.

Wee series 15kW HE AT UP TO 150m2 (3 BEDROOM HOME)


X T REME R A D L EG


X TREME R AD BA SE



X TREME R AD LEG



X TREME R AD WOODY



ULTR A X TREME R AD

Ultra low emission model Convection fan for added efficiency


X TREME PED VE

Clean air approved model Gloss black enamel finish


X TREME PED HT



Xtreme series models are MfE clean air approved with a choice of pedestal base, leg and wood stacker configurations. The Xtreme Rad models feature large flat radiant cooktops with ample space for both pots and kettles. The Xtreme Ped convection model is available in both metallic black paint and gloss black enamel finish.

The clean burning design delivers an impressive peak output of 20kW to heat your home with a large landscape door glass providing the perfect flame view to enjoy on cold winter nights. All models (excluding the Ultra) can be fitted with a 3kW wetback to assist with water heating requirements.

Xtreme series 20kW HE AT UP TO 220m2 (4 BEDROOM HOME)


From the initial spark to the final embers slowly burning out, the Ambience series is the embodiment of minimalist design and smooth styling. Award winning design with exceptional performance and style, strikingly finished in gloss black vitreous enamel.

Get the best of both radiant and convection heat from these convection fires that also generate impressive radiant heat through the one piece glass front. The clean burning firebox design will deliver warmth and comfort all winter long.

Ambience series 15 & 20kW

BES T DESIGN AWARDS DOUBLE WINNER

A MBIE P LUS / A L LOY MEDIUM WA L L F LO O R P R OT EC TO R


AMBIE PLUS

Clean air approved model 20kW peak heat output

Heat up to 220m2 (4 bdrm home)Optional 3kW wetback671W x 550D x 762H

AMBIE ONE

Clean air approved model 15kW peak heat output

Heat up to 150m2 (3 bdrm home)Optional 3kW wetback1

577W x 464D x 720H

1 Wetback options are only available for properties with a land size of 2Ha or greater.

A MBIE O NE


The Classic Rad features a very deep North/South firebox design which can accommodate firewood up to 540mm long. The firebox design provides increased heating capacity with a peak output of 17kW and the large flat 8mm steel cooktop provides a generous space for pots and boiling the kettle.

Classic Rad 17kW CL A SSIC R AD


8mm steel radiant cooktopOptional Side wetback530W x 708D x 680H

HE AT UP TO 170m2 (3 BEDROOM HOME)

CL A SSI C R A D / RIMU DEEP WA L L F LO O R P R OT EC TO R


Mega Rad 24kW The largest clean air approved Metro, and the biggest fire in the range. The Mega Rad features a huge firebox with a solid 10mm steel cooktop to match. This firebox handles hefty firewood with ease and is capable of providing up to 24kW’s of peak heat to keep the largest of homes warm and comfortable all winter long.

MEGA R AD


10mm steel radiant cooktopOptional 3kW wetback840W x 659D x 744H

HE AT UP TO 28 0m2 (4-5 BEDROOM HOME)


LTD WEE R AD BA SE

15kW peak heat outputHeat up to 150m2 (3 bdrm home)

Optional 3kW or 4kW wetback615W x 501D x 691H

LTD WEE R AD LEG



LTD WEE R AD WOODY



LTD X TREME R AD BA SE



LTD X TREME R AD LEG



LTD X TREME R AD WOODY



Metro LTD models are specifically designed for lifestyle and rural properties with a land area of two hectares or greater. Choose from seven freestanding models with pedestal base, leg and wood stacker configurations. Peak heat outputs range from the 15kW LTD Wee models to the impressive 24kW output of the LTD Mega Rad.

All LTD freestanding models feature large flat radiant cooktops with ample space for both pots and kettles. The unique firebox design delivers long burn times and all models can be fitted with either a 3kW or 4kW wetback ensuring winter warmth, cooking and water heating are all dominant features.

LTD series 15-24kW


LTD Mega Rad 24kWThe largest LTD rural Metro, and the biggest fire in the range. The LTD Mega Rad features a huge firebox with a solid 10mm steel cooktop to match. This firebox handles hefty firewood with ease and is capable of providing up to 24kW’s of peak heat to keep the largest of homes warm and comfortable all winter long.

LTD MEGA R AD

24kW peak heat outputHeat up to 280m2 (4-5 bdrm home)

10mm steel radiant cooktop Optional 3kW or 4kW wetback

840W x 659D x 744H


Insert and Built-In series

The easy way to distinguish between an Insert or Built-In installation is an Insert fire is ‘inserted’ into an existing masonry chimney, where a Built-In fire requires a purpose ‘built’ timber framed cavity (false chimey) for installation.

INSERT INSTALLATION (MASONRY / BRICK CHIMNEY)

An Insert model is the perfect fit for replacing an inefficient open fireplace or older style insert fire. An Insert installation is into an existing masonry chimney with a Metro ECO Insert flue kit.

BUILT-IN INSTALLATION (TIMBER FRAMED CAVITY)

The benefit of a ‘Built-In’ installation is that any wall surface in your home can be turned into a purpose built cavity to accommodate a wood fire. Built-In fires can also be elevated for modern styling and convenience.

You can install an Insert model into a timber framed cavity by installing the Insert firebox into a special ‘Vented Zero Clearance Cabinet’ (VZCC). All Metro Insert models have an appliance specific VZCC to achieve a ‘Built-In’ installation.

The Mega Smart Built-In is a dedicated built-in model and comes standard with a VZCC pre-fitted to its firebox.

All ‘built-in’ installations require the ECO Built-In flue kit. The ECO Built-In flue kit is designed to shield the fluepipe from all combustible materials within the timber cavity and incorporates the Metro ECO cowl for improved draw and performance.


S TEP 2

Installation of the Insert firebox into the Vented Zero

Clearance Cabinet. Assembly and installation of the Metro

ECO Built-In flue kit

S TEP 1

Preparation and construction of the timber cavity. Installation

of the Vented Zero Clearance Cabinet and flue liner spigot

S TEP 3

Fit front wall lining to cavity and complete construction

of the floor protector. Fit side wall linings and install

fascia to the firebox

INSERT MODEL S MA SONRY / BRICK CHIMNE Y

Smart Insert modelsTrend Insert models

Ultra Insert

BUILT-IN MODEL S TIMBER FR AMED C AVIT Y

Smart Insert models + Smart VZCCTrend Insert models + Trend VZCC

Ultra Insert + Ultra VZCCMega Smart Built-In (pre-fitted VZCC)

BUILT-IN INS TALL ATION TIMBER FR AMED C AVIT Y


1 Installation into a timber framed cavity (false chimney) requires the Trend Insert Vented Zero Clearance Cabinet (VZCC) and ECO Built-In flue kit.

2 Wetback options are only available for properties with a land size of 2Ha or greater.

Traditional styling with a gentle sloping front and rolled ashlip. Choose the clean air approved model for urban installations or the LTD rural model for properties with a land area of 2Ha or greater. Suitable for installation into an existing masonry chimney or timber framed cavity1 (false chimney) using the Trend Insert VZCC.

LTD TREND INSERT

LTD model (2Ha+ land size)Longer burn times

Optional 3kW or 4kW wetbackGloss black enamel finish

TREND INSERT

Clean air approved model300mm minimal hearth projectionThermo fan for urban installations

Optional 3kW or 4kW wetback2

Gloss black enamel finish

Trend Insert 15kW HE AT UP TO 150m2 (3 BEDROOM HOME)

T REND INSER T

2020 WO O D F IRE R A N GEME T R O F IRE S .CO.NZ 231 Installation into a timber framed cavity (false chimney) requires the Smart Insert

Vented Zero Clearance Cabinet (VZCC) and ECO Built-In flue kit.

Minimal detailing and clean lines place the Smart well in any home. Choose the clean air approved model for urban installations or the LTD rural model for properties with a land area of 2Ha or greater. Suitable for installation into an existing masonry chimney or timber framed cavity1 (false chimney) using the Smart Insert VZCC.

LTD SMART INSERT

LTD model (2Ha+ land size)Longer burn times

Optional Smart BoosterMetallic black paint or


SMART INSERT

Clean air approved model312mm minimal hearth projection

Optional Smart BoosterMetallic black paint or


Smart Insert 15kW HE AT UP TO 150m2 (3 BEDROOM HOME)

SM A R T INSER T V E / BUILT-IN INS TA L L AT I O N W I T H FA S CI A B A SE R A IL


The Ultra Insert is the first New Zealand made and approved single chamber ULEB Insert. The unique firebox design delivers an ultra clean burn with incredibly low emissions. A whisper quiet convection fan enhances heat distribution for maximum efficiency. Suitable for installation into an existing masonry chimney or timber framed cavity (false chimney) using the Ultra Insert VZCC and ECO Built-In flue kit.

ULTR A INSERT

Ultra low emission model 15kW peak heat output

Convection fan for heat distributionMetallic black paint or


Ultra Insert 15kW HE AT UP TO 150m2 (3 BEDROOM HOME)

ULT R A INSER T H T


The perfect blend of functionality and smart contemporary styling. The Mega Smart is a dedicated ‘Built-in’ appliance with a Zero Clearance Cabinet ‘pre-fitted’ to the firebox for installation into a timber framed cavity. With an outstanding peak output of 20kW and wetback capable, the Mega Smart is designed for heating large open areas and will drive out the cold all winter long.

MEGA SMART BUILT-IN

Clean air approved model Dedicated Built-In including VZCC

20kW peak heat outputOptional Mega Smart Booster


Mega Smart 20kW HE AT UP TO 220m2 (4 BEDROOM HOME)


OUTDOOR 850B

Quality Corten steel fireboxStainless steel levelling feet

Internal cooking grill & pizza stoneFreestanding flue system

Cooking tool kit includes:Pizza peel, fire rake, grill lifter for installing the grill when cooking and a wall mounted bracket for

hanging the cooking tools

OUTDOOR 850P

Quality Corten steel fireboxCorten steel pedestal base




OUTDOOR 850T

Quality Corten steel fireboxStainless steel trolley base




New Zealander’s love their outdoor living and a well designed outdoor space allows you to enjoy the outdoors all year round. Metro’s versatile outdoor fires deliver warmth, ambience and cooking capabilities for you to enjoy the full flavour of a flame grilled steak and the delicious taste of wood fired pizza. Sear food to perfection on the cooking grill, slide in the pizza stone and watch the mozzarella melt, or simply sit back and relax in the warmth.

Designed and manufactured from corrosion resistant Corten and stainless steel, the closed firebox design delivers impressive radiant heat while the landscape door glass provides panoramic fireside views, safety during operation and prevents wind blown ash and smoke nuisance often found with open outdoor fires.

Choose from six different configurations with both freestanding and roof penetration flue options available.

Outdoor fires Heat & cook


O U T D O O R 85 0 B / CUS TO M CO N CRE T E P L IN T H & R O O F P ENE T R AT I O N F LUE S Y S T EM


Metro ECO flue systems

An ECO flue kit is an efficient way to get the optimum performance from your wood fire – heating your home sooner and consuming less firewood.

ECO FLUE KIT

The ECO flue kit differs from a standard flue system due to the much higher efficiency it operates at. All flue systems need moving air between the liners to ensure the outer flue liners remain cool. The ECO flue kits cooling air comes from either the ceiling cavity or from outside the home.

With a Metro ECO flue kit your home will be heated sooner and more efficiently. Once your home is heated to your desired temperature the fire can be turned to a lower setting consuming less firewood, saving you money.

Another performance benefit is the enhanced draw of the ECO cowl. The rocket shaped ECO cowl creates an upward vortex inducing updraft to the flue gases which increases the draw within the flue pipe improving the performance and heat output of your wood fire.

STANDARD FLUE KIT

A Standard flue kit is very inefficient as much of the heat generated by the wood fire is drawn into the flue liners and vented outside. The flue liners are also open to the outside environment which can be noisy during high winds.

Lab testing of a Standard flue kit resulted in the heated air generated by the wood fire being drawn from the home at an astounding rate of 450 litres per minute. Even worse, this lost heat is replaced by cold air drawn into the room from outside at the same rate causing a constant incoming draught. This requires the fire to be operated at a higher burn rate to heat the constant incoming cold air.

Standard flue kits are not only less efficient, but they will heat your home slower using more firewood costing you both heat and money.

2020 WO O D F IRE R A N GE 29ME T R O F IRE S .CO.NZ

Superior performance

ECO FLUE + OP TION KIT

The ECO option kit is an additional kit installed with the ECO flue kit for homes without a vented ceiling cavity or homes that feature a sloping ceiling. Ventilation for the ECO flue kit is drawn into the flue liners from outside the home.

S TANDARD FLUE KIT

Ventilation for a Standard flue kit is drawn into the flue liners from the room being heated by the wood fire. This lost heat is then replaced by cold air drawn into the room from outside at the same rate causing a constant incoming draught.

ECO FLUE KIT

The ECO flue kit is suitable for all freestanding wood fires installed into a home with a vented ceiling cavity. Ventilation is drawn into the flue liners from the homes ceiling cavity allowing all the heat generated by the wood fire to remain inside the home.

INCRE A SED EFFICIENC Y

WITH A ME TRO ECO FLUE KIT

INCRE A SED EFFICIENC Y

WITH A ME TRO ECO FLUE KIT

REDUCED EFFICIENC Y AND

HE AT LOSS WITH A S TANDARD FLUE KIT


Shown (right) are the most common installation methods for installing the Metro ECO Flue system in a single storey home.

To ensure safe and efficient installation, this flue system must be installed as detailed by either a registered installer, or someone competent in the installation of solid fuel appliances.

SINGLE S TORE Y INS TALL ATION

FLAT CEILING/ROOF

Requires both the ECO flue kit and ECO option kit as per sloping ceiling

unless a vented ceiling cavity exists.to scale

SLOPING CEILING

Requires both the ECO flue kit and ECO option kit to enable air to be drawn into the flue system from

outside the home.to scale

FLAT CEILING/CAVITY

Requires the ECO flue kit as air is drawn into the flue system directly from the homes vented

ceiling cavity. to scale

ECO FLUE KIT

Suitable for freestanding wood fires installed into a home with a vented ceiling cavity. Ventilation for the flue system is drawn from the homes ceiling cavity.

L

M

N

O

P

E

G

F

A 1 x stainless steel weather butterfly

B 1 x stainless steel ECO Cowl top

C1 x 420mm x 240mm diameter stainless steel ECO Cowl housing

D1 x 480mm long stainless steel flue pipe extension with flashing cone

E1 x 1200mm x 150mm diameter stainless steel flue pipe

F1 x 1200mm x 250mm diameter galvanised outer casing with 750mm long slip section

G1 x 800mm x 200mm diameter galvanised inner casing

H1 x galvanised mounting plate with brackets and 300mm long x 300mm diameter casing attached

I 1 x insulation gasket

J 1 x black clip-on ceiling plate

K2 x 1200mm lengths of 150mm diameter stainless steel flue pipe painted metallic black

+ 1 x bag of assembly bolts

A

B

C

D

E

F

G

H

I

J

K

ECO OPTION KIT

An additional kit installed with the ECO flue kit for homes without a vented ceiling cavity or for homes featuring a sloping ceiling. Ventilation for the flue system is drawn from outside the home.

L External intake flashing cone

M1 x 780mm x 300mm diameter galvanised outer casing

N Dropbox infill panel

O Dropbox edge covers

P Ceiling plate mounted heat shield

ECO EXTENSION KIT

Suitable for extending all Metro flue systems within the roof space and outside the home. Includes 1200mm lengths of 150mm flue pipe, 200mm inner liner and 250mm outer liner.


F1 x 1200mm x 250mm diameter galvanised outer casing


Flue kit components Stainless steel outer casing options are available with these ECO flue systems.


2ND FLOOR ENCLOSED FLUE PIPE

Requires the ECO flue kit with additional lengths of 150mm flue pipe.

Additional components below are not supplied by Metrofires but are also required for this installation in accordance with AS/NZS 2918:2001

• 200mm and 250mm inner/outer combination liners

• 2nd floor vent cover and additional ceiling plate with a 250mm diameter hole

2ND FLOOR EXPOSED FLUE PIPE

Requires the ECO flue kit with additional lengths of 150mm flue pipe.

Additional components below are not supplied by Metrofires but are also required for this installation in accordance with AS/NZS 2918:2001

• A floor penetration kit

• 1 x 1200mm long mesh/screen

Shown (right) are the most common installation methods for installing the Metro ECO Flue system in a two storey home.

To ensure safe and efficient installation, this flue system must be installed as detailed by either a registered installer, or someone competent in the installation of solid fuel appliances.

T WO S TORE Y INS TALL ATION

to scale to scale

ECO BUILT-IN KIT

Required with all Metro Built-In fires and Metro Insert fires with a Vented Zero Clearance Cabinet (VZCC) installed into a timber framed cavity (false chimney).

The ECO Built-In kit contains 3 x ECO extension kits and an ECO Cowl.

Suitable for the following models:

• Smart Insert models + Smart VZCC• Trend Insert models + Trend VZCC• Ultra Insert + Ultra VZCC• Mega Smart Built-In

ECO INSERT KIT

Suitable for the Smart and Trend Insert models installed into a masonry chimney.

ULTRA INSERT KIT

Required with the Ultra Insert model installed into a masonry chimney.












E(ECO INSERT KIT ONLY) 3 x 1200mm x 150mm diameter stainless steel flue pipe

E(ULTRA INSERT KIT ONLY) 2 x 1200mm x 150mm diameter stainless steel flue pipe


G(ULTRA INSERT KIT ONLY) 1 x 1300mm x 150mm diameter stainless steel flue pipe and liner

A

B

C

D

E

G

F

A

B

C

D

E

G

F


TILE OP T IONS

Pine and rimu wall floor protectors are available in a range of tile colours. See instore for samples.

Floor protectors Wall and InsertAll Metro freestanding wood fires only require an ash hearth floor protector to comply with the minimum floor protector requirements of AS/NZS 2918:2001. Match a floor protector to your fire when installing either a freestanding model against a wall or an insert model.

Floor protectors can be laid directly on top of existing flooring (carpet, timber etc) for quick and easy installation.

SLIMLINE WALL

Lightweight aluminium sheet finished in textured black powder coat with a low profile 4mm thickness. Available in two wall sizes.

ALLOY WALL

Finished with anodised black extruded aluminium trim and black tiles. Available in four wall sizes.

PINE WALL & INSERT

Available in two wall sizes and an Insert size in a range of tile colours. Finished with a natural stain and oiled, waxed and polished to bring out the timber grain and lustre.

RIMU WALL

Available in two wall sizes in a range of tile colours. Finished with a natural stain and oiled, waxed and polished to bring out the timber grain and lustre.

Slimline and Alloy wall floor protectors The overall dimensions constitute an ‘ash hearth floor protector’ as the Slimline and Alloy trim are both non combustible materials.

Pine and Pacific Rimu wall floor protectors When calculating the floor protector your heating appliance requires, the ash hearth floor protector is the tiled area only. Timber trim measurement ‘X’ does not form part of the ‘ash hearth floor protector’ and must be deducted from your calculations.

SLIMLINE WALL

ALLOY WALL

DEP

TH

WIDTH

DEP

TH

WIDTH

RIMU WALL

PINE WALL

DEP

TH

XWIDTH

PINE INSERT DEP

TH

XWIDTH

DEP

TH

XWIDTH


FLOOR PROTECTORSAlloy Tiny

Alloy Small

Alloy Medium

Alloy Deep

Slimline Small

Slimline Medium

Pine Medium

Pine Deep

Pine Insert

Rimu Medium

Rimu Deep

WIDTH 650 855 1042 1042 855 1042 955 955 1255 980 980

DEPTH 830 840 1015 1148 840 1015 935 1085 360 945 1100

X DIMENSION (trim) - - - - - - 23 23 23 35 35

THICKNESS 30 30 30 30 4 4 25 25 43 40 40

CLEAN AIR MODELS

TINY PED ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓TINY RAD ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓TINY RAD - WOODY ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓WEE RAD - BASE ✓ ✓ ✓ ✓ ✓ ✓ ✓WEE RAD - LEG ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓WEE RAD - WOODY ✓ ✓ ✓ ✓ ✓ ✓ ✓ULTRA WEE RAD ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓WEE PED ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓AMBIE ONE ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓AMBIE PLUS ✓ ✓ ✓ ✓ ✓CLASSIC RAD ✓ ✓ ✓XTREME RAD - BASE ✓ ✓ ✓ ✓ ✓ ✓ ✓XTREME RAD - LEG ✓ ✓ ✓ ✓ ✓ ✓ ✓XTREME RAD - WOODY ✓ ✓ ✓ ✓ ✓ ✓ ✓ULTRA XTREME RAD ✓ ✓ ✓ ✓ ✓ ✓ ✓XTREME PED ✓ ✓ ✓ ✓ ✓ ✓ ✓MEGA RAD ✓ ✓ ✓TREND & SMART INSERT ✓ULTRA INSERT ✓

LTD MODELS

LTD WEE RAD - BASE ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓LTD WEE RAD - LEG ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓LTD WEE RAD - WOODY ✓ ✓ ✓ ✓ ✓ ✓ ✓LTD XTREME RAD - BASE ✓ ✓ ✓ ✓ ✓ ✓ ✓LTD XTREME RAD - LEG ✓ ✓ ✓ ✓ ✓ ✓ ✓LTD XTREME RAD - WOODY ✓ ✓ ✓ ✓ ✓ ✓ ✓LTD MEGA RAD ✓ ✓ ✓LTD TREND & SMART INSERT ✓

All measurements detailed are in millimetres (mm). The dimensions shown are nominal only. All suitable floor protector indications are inclusive of a 10mm minimum skirting board allowance.


RIMU CORNER

PINE CORNER

SLIMLINE CORNER

ALLOY CORNER

X

WIDTHW

IDTHDEPTH

YY

Z

WIDTH

WID

THDEPTH

Y

Y

Z

WIDTH

WID

THDEPTH

Y

Y

Z

X

WIDTH

WID

THDEPTH

Y

Y

Z

TILE OP T IONS

Pine and rimu corner floor protectors are available in a range of tile colours. See instore for samples.

Floor protectors CornerAll Metro freestanding wood fires only require an ash hearth floor protector to comply with the minimum floor protector requirements of AS/NZS 2918:2001. Match a suitable floor protector to your fire when installing a freestanding model into a corner situation.

Floor protectors can be laid directly on top of existing flooring (carpet, timber etc) for quick and easy installation.

SLIMLINE CORNER

Lightweight aluminium sheet finished in textured black powder coat with a low profile 4mm thickness. Available in two corner sizes.

ALLOY CORNER

Finished with anodised black extruded aluminium trim and black tiles. Available in three corner sizes.

PINE CORNER

Available in two corner sizes in a range of tile colours. Finished with a natural stain and oiled, waxed and polished to bring out the timber grain and lustre.

RIMU CORNER

Available in three corner sizes in a range of tile colours. Finished with a natural stain and oiled, waxed and polished to bring out the timber grain and lustre.

Slimline and Alloy corner floor protectors The overall dimensions constitute an ‘ash hearth floor protector’ as the Slimline and Alloy trim are both non combustible materials.

Pine and Pacific Rimu corner floor protectors When calculating the floor protector your heating appliance requires, the ash hearth floor protector is the tiled area only. Timber trim measurement ‘X’ does not form part of the ‘ash hearth floor protector’ and must be deducted from your calculations.


FLOOR PROTECTORSAlloy 1000

Alloy 1150

Alloy 1300

Slimline 1000

Slimline 1150

Pine 1000

Pine 1150

Rimu 1000

Rimu 1150

Rimu 1300

WIDTH 1000 1150 1300 1000 1150 1000 1150 1000 1150 1300

DEPTH 1180 1310 1493 1180 1310 1180 1310 1180 1310 1525

X DIMENSION (trim) - - - - - 23 23 35 35 35

Y DIMENSION 670 700 814 670 700 670 700 670 700 863

Z DIMENSION 465 640 689 465 640 465 640 465 640 619

THICKNESS 30 30 30 4 4 25 25 40 40 40

CLEAN AIR MODELS

TINY PED ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓TINY RAD ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓TINY RAD - WOODY ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓WEE RAD - BASE ✓ ✓ ✓ ✓ ✓ ✓WEE RAD - LEG ✓ 1 ✓ ✓ ✓ 1 ✓ ✓ ✓ ✓WEE RAD - WOODY ✓ ✓ ✓ ✓ ✓ULTRA WEE RAD ✓ ✓ ✓ ✓ ✓ ✓WEE PED ✓ 2 ✓ ✓ ✓ 2 ✓ ✓ ✓ ✓AMBIE ONE ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓AMBIE PLUS ✓ ✓CLASSIC RAD ✓ ✓XTREME RAD - BASE ✓ ✓ ✓ ✓ ✓ ✓XTREME RAD - LEG ✓ ✓ ✓ ✓ ✓ ✓XTREME RAD - WOODY ✓ ✓ ✓ ✓ULTRA XTREME RAD ✓ ✓ ✓ ✓ ✓ ✓XTREME PED ✓ ✓ ✓ ✓ ✓ ✓MEGA RAD ✓ ✓

LTD MODELS

LTD WEE RAD - BASE ✓ ✓ ✓ ✓ ✓ ✓LTD WEE RAD - LEG ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓LTD WEE RAD - WOODY ✓ ✓ ✓ ✓ ✓LTD XTREME RAD - BASE ✓ ✓ ✓ ✓ ✓LTD XTREME RAD - LEG ✓ ✓ ✓ ✓ ✓LTD XTREME RAD - WOODY ✓ ✓ ✓ ✓LTD MEGA RAD ✓ ✓

All measurements detailed are in millimetres (mm). The dimensions shown are nominal only. All suitable floor protector indications are inclusive of a 10mm minimum skirting board allowance. 1 This model must have the Pioneer corner wing shields fitted to be able to be installed onto this size floor protector. 2 This model must have the Pioneer flue shield side extensions fitted to be able to be installed onto this size floor protector.


Heat transfer systems

Create a dry, healthy environment and reduce condensation and dampness in your home at the same time.

Metro heat transfer systems perfectly partner your Metro fire by distributing the excess heat generated by your fire via an insulated ducting system to warm other rooms in your home. This warm air then circulates back to the room with the wood fire to keep a continual cycle of warm air moving throughout your home.

The excess heat trapped at ceiling level can reach temperatures of up to 350C so it makes good sense to spread this warmth throughout your home.

1 ROOM HEAT TRANSFER SYSTEM

Ideal for smaller homes or if you are only requiring one additional room to be heated. Featuring an inline fan capable of moving 320m3 of warm air per hour.

3 ROOM HEAT TRANSFER SYSTEM

Designed to distribute an even heat throughout your home featuring a 3 speed LCD controller and european designed 3 speed mixed-flow fan with a maximum airflow of 910m3 of warm air per hour. Additional room outlets can be easily added to extend the system.

FRESH AIR SYSTEM

Add the fresh air system to your 3 room heat transfer system and keep your home cooler over summer providing a dry and healthy environment for your family.

The fresh air system utilises the components of the 3 room heat transfer system and adds extra ducts, dampers and high grade filter.


Provide a cool, dry healthy environment for your family during summer

FRESH AIR SYSTEM COMPONENTS

• 1 x 200mm diameter intake • 1 x fresh air/heat switch • 1 x 6m length of 200mm diameter Unilok ducting • 1 x 200mm in-line filter • 1 x Y damper 200/200/200mm • 1 x Y branch 150/150/150mm • 2 x 3m lengths of 150mm insulated ducting • 1 x 150mm in-line barrel damper • 1 x Y branch 200/200/150mm • 1 x large roll of ducting tape

Transfer heat from your living room to 3 or more rooms in your home

3 ROOM HEAT TRANSFER COMPONENTS

• 1 x 200mm diameter intake • 1 x LCD thermostat / 3 speed fan controller • 2 x 3m lengths of 200mm diameter insulated acoustic duct • 1 x 200mm diameter 3 speed fan module • 1 x 3 way splitter • 3 x 3m lengths of 150mm diameter insulated duct • 3 x 150mm diameter adjustable cone outlet diffusers • 4 x rolls of ducting tape

Transfer heat from your living room to 1 other room in your home

1 ROOM HEAT TRANSFER COMPONENTS

• 1 x 150mm diameter intake • 1 x thermostat • 2 x 3m lengths of 150mm diameter insulated duct • 1 x 150mm diameter inline fan • 1 x 150mm diameter adjustable cone outlet diffuser • 2 x rolls of ducting tape


A

E L

H

Mantel

TREND INSERT MODELS

B

GC

K

F

J

D

Refer table opposite

595m

m m

axim

um

Heig

ht a

djus

tabl

e pa

nel

I

SMART INSERT MODELS

B

GC

K

F

J

D

Refer table oppositeI

ULTRA INSERT

B

GC

FD

Refer table opposite

595m

m m

axim

um

Heig

ht a

djus

tabl

e pa

nel

I

MEGA SMART BUILT-IN

B

GC

K

F

J

D

Refer table oppositeI

SPECIFIC ATIONS

Insert and Built-In modelsMetro Insert and Built-In models are tested to comply with AS/NZS 2918:2001 incorporating Appendix ‘E’ when installed in accordance with the manufacturers Installation and Operation manuals and the applicable Vented Zero Clearance Cabinet installation manuals.

MANTEL CLEARANCE

A timber or combustible mantel above the fireplace opening must be a minimum distance (L) above the top of the Metro’s fascia as detailed in the table opposite. If the clearance is less than the minimum specified, a heat shield will be required to be fitted under the mantel or to the top of the fascia using the relevant detail in AS/NZS 2918:2001.

HEARTH / FLOOR PROTECTOR REQUIREMENTS

The floor protector for Insert and Built-In models must project from behind the fascia the distance specified in the table opposite, and must extend a minimum of 200mm from each side of the door opening. The minimum projection is the distance from the front of the wall lining (behind the fascia) to the front non combustible point of the floor protector.

WETBACK INSTALLATION

Smart Insert models (Smart Insert Booster) Fits to either left or right hand side of the firebox externally.

Trend Insert (3kW or 4kW wetback) The Trend Insert can only be fitted with a wetback on properties of 2Ha or greater. Fits to either left or right hand side of the firebox internally.

LTD Trend Insert (3kW or 4kW wetback) Fits to either left or right hand side of the firebox internally.

Mega Smart Built-In (Mega Smart Booster) Fits to either left or right hand side of the firebox externally.

Ultra Insert This model cannot be fitted with a wetback.

595m

m m

axim

um

Heig

ht a

djus

tabl

e pa

nel


SMAR

T IN

SERT

LTD

SMAR

T IN

SERT

SMAR

T M

ODEL

S

(BUI

LT-I

N)

TREN

D IN

SERT

TREN

D BU

ILT-

IN

LTD

TREN

D IN

SERT

LTD

TREN

D BU

ILT-

IN

MEG

A SM

ART

BU

ILT-

IN

ULTR

A IN

SERT

ULTR

A BU

ILT-

IN

A FIREBOX WIDTH 560 560 693 1 560 693 1 560 693 1 860 580 690 1

B FIREBOX DEPTH 495 495 566 1 500 625 1 500 625 1 631 530 623 1

C FIREBOX HEIGHT 550 550 695 1 550 695 1 550 695 1 814 550 704 1

D FLUE CENTRE 405 405 405 405 405 405 405 445 405 405

E FASCIA WIDTH 890 890 890 810 810 810 810 1057 810 810

F FASCIA DEPTH 30 30 30 185 185 185 185 30 120 120

G FASCIA HEIGHT 672 672 672 650 650 650 650 822 654 654

H MIN. HEARTH WIDTH 890 890 890 825 825 825 825 1057 825 825

I MIN. HEARTH PROJECTION 312 312 460 300 300 350 350 505 300 440

J WETBACK INLET 130 130 175 170 2 215 2 170 215 212 - -

K WETBACK OUTLET 325 325 370 360 2 405 2 360 405 402 - -

L MANTEL CLEARANCE 475 475 460 340 340 460 460 500 500 450

FLOOR PROTEC TOR HEIGHTS & PROJEC TION (I)

0 FLOOR LEVEL 395 395

460 MINIMUM

PROJECTION REQUIRED

Irrespective of the height of the floor protector

above floor level

300 MINIMUM

PROJECTION REQUIRED


above floor level

300 MINIMUM

PROJECTION REQUIRED


above floor level

455

350 MINIMUM

PROJECTION REQUIRED


above floor level

505 MINIMUM

PROJECTION REQUIRED


above floor level

402

440 MINIMUM

PROJECTION REQUIRED


above floor level

10 mm ABOVE FLOOR LEVEL 371 371 455 378

15 mm ABOVE FLOOR LEVEL 371 371 445 -






41mm ABOVE FLOOR LEVEL 312 312 350 -

50 mm ABOVE FLOOR LEVEL - - - 300

FLOOR PROTEC TOR T YPE & CONS TRUC TION

INSERT (ALL FLOOR TYPES) INSULATED INSULATED - ASH - INSULATED - - INSULATED -

BUILT-IN (COMBUSTIBLE FLOOR) - - INSULATED - INSULATED - INSULATED INSULATED - INSULATED

BUILT-IN (NON COMBUSTIBLE FLOOR) - - ASH - ASH - ASH ASH - ASH

INSULATED - Recommended construction of tiles on 26mm thick Eterpan LD board or equivalent / ASH - Recommended construction of tiles on 6mm thick non-combustible board

Please note: All measurements detailed above are in millimetres (mm). Insert model measurements exclude the 13mm insulating blanket.1 These dimensions are for the Vented Zero Clearance Cabinet and include the spacer blocks fitted. Flue spigot liner assembly is not included in the dimensions.2 Wetback options are only available for the Trend Insert when installed onto properties of 2Ha or greater.


TIN

Y PE

D

TIN

Y RA

D

TIN

Y RA

D W

OOD

Y

WEE

RAD

BA

SE

WEE

RAD

LE

G

WEE

RAD

W

OOD

Y

ULTR

A W

EE R

AD

WEE

PED

XTRE

ME

RAD

BASE

XTRE

ME

RAD

LEG

XTRE

ME

RAD

WO

ODY

ULTR

A XT

REM

E RA

D

A 211 230 251 271 251 271 268 263 251 251 251 277

B 433 553 568 678 568 708 658 651 650 650 680 635

C 580 585 580 580 580 580 580 580 630 630 630 632

D 290 419 382 486 456 1 506 497 2 473 3 458 458 478 450

E 25 150 110 180 150 1 200 190 2 170 3 100 100 120 100

F 235 232 232 232 232 232 232 230 227 227 227 227

G 185 300 310 370 260 400 350 350 280 280 310 280

H 60 75 100 120 100 120 100 110 100 100 100 100

I 791 815 831 851 831 851 848 843 881 881 881 909

J 650 650 650 825 825 825 825 825 907 907 907 907

K 990 1180 1120 1270 1225 1 1295 1285 2 1250 3 1280 1280 1306 1267

L 780 910 870 1048 1016 1 1066 1059 2 1034 3 1084 1084 1103 1075

M 250 250 250 425 425 425 425 425 507 507 507 507

N 280 280 365 295 295 365 - 295 312 312 382 -

O 470 470 555 485 485 555 - 485 502 502 572 -

WIDTH 496 505 515 615 615 615 615 602 740 740 740 710

DEPTH 492 508 498 501 501 501 515 503 554 554 554 582

HEIGHT 659 667 758 691 688 758 691 665 743 743 813 722

Metro freestanding wood fires comply with AS/NZS 2918:2001.

Minimum installation clearances are in millimetres (mm) with a Pioneer double flue shield fitted to the appliance / flue pipe.

AS/NZS 2918:2001 allows for a reduction in minimum clearances as detailed in Tables 3.1 and 3.2 of the Standard. Selected Metro models have undergone additional testing for reduced installation clearances. The footnotes below the table apply to these selected models.

All clearances are measured from the following reference points as illustrated in the diagrams opposite.

• The nearest combustible wall or surface (A, B, D, E, G, H)

• The Metro’s flue centre (A, B, C, D)

• The Metro’s cabinet / heatshield outermost point (E, F, G, H)

• The edge of the ash floor protectors non-combustible surface (C, F, I, J, K, L, M).

1 Wee Rad (LEG) corner clearance (E) can be reduced to 120mm with Wee Rad corner wing shields fitted. This also reduces clearances (D) to 426mm, (K) to 1185mm and (L) to 987mm. The Wee Rad (LEG) model must be installed to a corner clearance (E) of 120mm. The corner wing shields are then fitted which gives a wall to shield corner clearance of 100mm.

2 Ultra Wee Rad corner clearance (E) can be reduced to 165mm with Wee Rad corner wing shields fitted. This also reduces clearances (D) to 471mm, (K) to 1245mm and (L) to 1031mm. The Ultra Wee Rad must be installed to a corner clearance (E) of 165mm. The corner wing shields are then fitted which gives a wall to shield corner clearance of 130mm.

3 Wee Ped corner clearance (E) can be reduced to 115mm if side extensions are fitted to the flue shield. This also reduces clearances (D) to 418mm, (K) to 1170mm and (L) to 978mm.

4 Classic Rad corner clearance (E) can be reduced to 180mm if side extensions are fitted to the flue shield. This also reduces clearances (D) to 460mm, (K) to 1435mm and (L) to 1131mm.

SPECIFIC ATIONS

Freestanding models


XTRE

ME

PED

AMBI

E ON

E

AMBI

E PL

US

CLAS

SIC

RAD

MEG

A RA

D

LTD

WEE

RAD

BA

SE

LTD

WEE

RAD

LE

G

LTD

WEE

RAD

W

OOD

Y

LTD

XTRE

ME

RAD

BASE

LTD

XTRE

ME

RAD

LEG

LTD

XTRE

ME

RAD

WO

ODY

LTD

MEG

A RA

D

A 251 250 267 257 285 251 251 271 251 251 251 285

B 624 539 686 695 720 658 548 708 650 650 680 720

C 630 589 658 780 728 580 580 580 630 630 630 728

D 442 392 462 500 4 497 486 426 506 458 458 478 497

E 110 100 125 220 4 100 180 120 200 100 100 120 100

F 226 275 275 229 224 232 232 232 227 227 227 224

G 280 250 350 430 300 350 240 400 280 280 310 300

H 100 100 100 100 130 100 100 120 100 100 100 130

I 881 839 925 1037 1013 831 831 851 881 881 881 1013

J 907 825 906 728 1006 825 825 825 907 907 907 1006

K 1260 1142 1315 1490 4 1435 1270 1185 1295 1280 1280 1306 1435

L 1070 960 1109 1170 4 1229 1048 989 1066 1084 1084 1103 1229

M 507 427 506 328 606 425 425 425 507 507 507 606

N 312 350 360 393 300 300 295 365 350 350 420 300

O 502 540 550 583 490 490 485 555 540 540 610 490

WIDTH 688 577 671 530 840 615 615 615 740 740 740 840

DEPTH 554 464 550 708 659 501 501 501 554 554 554 659

HEIGHT 707 720 762 680 744 691 688 758 743 743 813 744

Wetback connection dimensions (N & O) are in millimetres (mm) and are taken facing the Metro wood fire / wall.

• Tiny Ped and Tiny Rad are 92mm left of the flue centre

• Tiny Rad Woody and Classic Rad are 184mm left of the flue centre

• Wee Series clean air models are 226mm left of the flue centre

• All other wetback capables models including all LTD freestanding models are 140mm left of the flue centre.

All specifications are correct and current at time of printing, but may alter and those detailed should be used as a guide only. Specifications are subject to change without notification; If in doubt please consult your local Metro Fires agency or visit metrofires.co.nz.

WALL CLEARANCES CORNER CLEARANCES

Visit www.metrofires.co.nz | Email [email protected]

To donate to Starship please visit: https://www.starship.org.nz

©PI

ON

EER

MAN

UFA

CTU

RIN

G LT

D F

EB20

20

Your Metro retailer details

metro fires...710w x 582d x 722h metrofires.co.nz 2020 wood fire range 7 xtreme ped ht clean air...

Documents