meyco me3 - international homepage - atlas copco€¦ · the meyco me3 design is based on common...
TRANSCRIPT
Concrete Spraying Mobile for medium sized tunnels
MEYCO ME3
Large diameter concrete conveying system
VERSATILE CONCRETE SPRAYINGAPPLICATION EXPERTISE UNIFIED FOR HIGH QUALITY, ECONOMICAL AND SAFE APPLICATION OF SPRAYED CONCRETE.
MAIN BENEFITS
Optimal sprayed concrete quality by providing a homogeneous mixture of concrete, accelerator and compressed air
Supreme productivity thanks to improved pumping efficiency and accurate boom operation
High Safety standard by prevention of under dosage of accelerator and fail safe conveying system
Meyco Mezza sturdy telescopic boom with play free slide system
Low pulsation dosing system optimized for alkali free liquid accelerators
Control panel and Radio Remote control
Container for liquid accelerator
2
Sturdy carrier with single-wheel drive including crabwalk
Large onboard compressor
Spraying head
Electric cable reel
Large onboard compressor for high compaction of sprayed concrete.
Single point control panel for all functions and operation overview.
Robust nozzle system with built in safety feature and easy cleaning.
Water hose reel for scaling
Diesel engine
Suprema wet spraying pump with S-tube
3
+ CONCRETE QUALITYHighly accurate dosing system for liquid accelerators with constant adjustment of volume including flow meter and rotor/stator-pump.
Suprema double piston pump with superfast switch-over for minimum pulsation and air compressor with optimized capacity. The recipe for high
quality sprayed concrete.
+ PRODUCTIVITYData logging of production data and system messages, selectable user profiles for machine parameter settings. Integrated diagnostics, redun-
dant control panel, intuitive operator interface and functions, easy wear parts access and live adjustment of accelerator dosage - the requirement
for supreme productivity.
+ SAFETYAutomatic pressure relieve of blocked concrete lines, prevention of un-der dosage, hopper screen activated emergency stop and safe operator
environment for tramming. Because we care about people.
+ WORLD CLASS SERVICEFlexiROC T35 and FlexiROC T40 are flexible and versa-tile tophammer drill rigs, developed and designed for high performance in demanding construction appli-cations. They are also a very efficient alternative for small and medi um size quarrying jobs. Even in tough terrain conditions, utilization of the rig is high, thanks to the long reach of the boom, FlexiROC T35 and FlexiROC T40 are flexible and versa-tile tophammer drill rigs, developed and designed for high performance in demanding
MEYCO ME3PLUG AND SPRAYMINIMIZED START UP TIME FOR HIGH PRODUCTIVE CONCRETE SPRAYING.
ATLAS COPCO SERVICE- IT’S NOT JUST ABOUT OUR PROMISES, IT’S ABOUT DELIVERY
The Meyco ME3 design is based on common wear parts of existing MEYCO concrete spraying machines for reduced stock requirements.
4
TECHNICAL SPECIFICATIONS = STANDARD = OPTION
CONCRETE SPRAYING PUMP
Meyco SE20 double piston pump with superfast switch-over system 20 m3/h at 50 bar
Automatic reverse function for pressure relief
Manual central lubrication for pump unit
Feeding hopper 250 l at 1300 mm height
Low profile feeding hopper 180l at 1160 mm height
Pump cylinder diameter 150 mm with 600 mm stroke
BOOM SYSTEM
Mezza telescopic boom with slide system and proportional hydr. valves
Manual central lubrication for boom
Automatic central lubrication system for boom and pump
Spraying head movement 120/360°
Nozzle nutation (rotation) 8°
Max height 9.5 m (incl. 1.5 m spraying distance)
Max width 16 m (8 m each side incl. 1.5 m spraying distance)
Working lights LED 24 V, 4x 50 W
DOSING SYSTEM
Flow meter (system accuracy ± 2%)
Rotor/stator-pump max 24 l/min at 10 bar
Auto-stop for accelerator under dosage and dry run protection
CONTROL SYSTEM
PLC control system with touch screen
User profile machine parameter management and integrated diagnostics
Data logging for production data and system messages
Radio remote control with back-up cable
Control box stainless steel
Heater for control box and user panel
Sensor for concrete temperature in hopper
ELECTRICAL SYSTEM
Voltage 3x 400/460 V
Frequency 50 or 60 Hz
Total installed power without compressor 40 kW
Total installed power with compressor 115 kW
Conversion Kit 1000 V / 50 Hz
Electric motor 37 kW
Cable size without compressor 3x 70/35 mm2
Cable size with compressor 3x 95/50 mm2
Cable length 80 m
Cable reel with hydraulic drive
WATER SYSTEM
SPRAYING SYSTEM
Conveying and nozzle system diameter 100/65 mm
Water tank 160 l
Dual water pump 15 l/min at 12/200 bar for cleaning
Water hose reel with 15 m high pressure hose and spraying pistol
High pressure water pump 150 l/min at 90 bar for low impact scaling
Hydraulic driven water hose reel with 100 m 1 1/4” hose
CARRIER
Direct single-wheel drive and steering ±25°, including crab,front,4WD, ABS and TCS
Diesel engine Deutz 4 cylinder, TD3.6, US EPA Tier 4, EU stage IV
Power rating 55.4 kW at 2600 rpm
Torque 330 Nm at 1600 rpm
Hydrostatic power steering and transmission
Central joint oscillation ±15°
Rims/Tires 13.00/16.00 R20
Spare wheel
Open drivers cabin with protective roof, FOPS and ROPS, seat 90° sideways
Portable fire extinguisher
Fire suppression system Ansul/Fogmaker
Hydraulic front stabilizers 2x
Hydraulic rear stabilizers 2x
2 Circuit service brakes and SAHR emergency and parking brakes
Fuel tank 80 l
Electric system 24 V
Batteries 2x 12 V, 70 Ah
Tramming lights 4x 70 W
Brake lights
Horn and reverse alarm
Rearview camera
Exhaust catalytic converter
Lifting hooks on wheel hubs
Lifting kit
AIR SYSTEM
Rotary vane compressor 75 kW, 7 bar, 10.5 m3/min at 6 bar
HYDRAULIC SYSTEMHydraulic tank 200 l
MISCELLANEOUS
Accelerator tank 650 l
Heater and insulation for accelerator tank
Concrete release agent hand sprayer 5 l
Working lights LED 24 V, 2x 50 W
Connection for external air supply
Toolbox
TRAMMING
Tramming speed on flat ground (rolling resistance 0.05) 18 km/h
Tramming speed on incline 1:8 7.8 km/h
Gradability at max load on good ground 30%
WEIGHT
Total weight without compressor 10200 kg
Total weight 11500 kg
DIMENSIONS
Width 2200 mm
Height 2600 mm
Length 7820 mm
Ground clearance (with standard tires) 350 mm
5
TECHNICAL SPECIFICATIONS
BOOM WORKING RANGE
R 7 0
00
25°
60°
3 000
9 m
0 m
10 m
9 m
8 m
7 m
6 m
5 m
4 m
3 m
1 m
2 m
0 m
1 m
2 m
3 m
0 m 1 m 2 m 3 m 4 m 5 m 6 m 7 m 8 m
8 m 9 m7 m6 m5 m4 m3 m2 m1 m
R 7 00090°
1 500
Sprayingdistance
9 m8 m7 m6 m5 m4 m3 m2 m1 m0 m
9 m
7 m
8 m
3 m
2 m
1 m
0 m
4 m
5 m
6 m
Boom working range side view
Boom working range top view
6
Top view turning radius.
Transport dimensions and gradability
DIMENSIONS
TECHNICAL SPECIFICATIONS
Rear View Front View
R 3 50
0
R 6 800
2 20
0
Side inclination driving
1 300
30 %
2 60
0
18° 20°
3 920
7 800
7
COMMITTED TO SUSTAINABLE PRODUCTIVITY
We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time.This is what we call – Sustainable Productivity.
98
51 34
63 01 2015
-05 Ö
rebro, Sw
eden. Legal Notice ©
Copyright 2013, A
tlas Copco R
ock Drills A
B, Ö
rebro, Sw
eden. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and
photos may show
equipment w
ith optional extras. No w
arranty is made regarding specifications or otherw
ise. Specifications and equipm
ent are subject to change without notice. C
onsult your Atlas C
opco Custom
er C
enter for specific information.
www.atlascopco.com