mgm companymgmcompany.com/catalog/catalog-2013.pdfmgm company, inc. milk line & accessories...
TRANSCRIPT
DAIRY EQUIPMENT PRODUCT GUIDE
Stocking Locations: WISCONSIN CHICAGO UNITED KINGDON
2013
MGM Company
International Dairy Equipment
Manufacturing -- Marketing – Distribution
2
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
2
MGM Company, Inc. WWW.MGMCOMPANY.COM
TABLE OF CONTENTS
MILK LINE & ACCESSORIES CLAMPS 4 FERRULES 5, 6 END CAPS 7 ELBOWS, 45’s, U BENDS 8, 9 TEE’S & Y’S 10 REDUCERS & ADAPTERS 11, 12, 13 HEX NUTS 13 Y-BALL CHECK VALVES 14, 15 AIR BLOW VALVES 14, 15 BUTTERFLY VALVES 16 IN LINE BALL CHECK VALVE 11, 14 GASKETS & SCREENS 17, 18 PIPELINE HANGERS 19 MILK INLETS & VALVES 20 CLAWS & SHELL / AIR FORKS 21 SHUT OFFS 21
RECEIVERS
RECEIVERS 22, 26 MOISTURE TRAPS 24 TRAP BENDS 24 FLOAT BALLS 24 MILK PUMPS 25 ACRYLIC COVERS 25 LIQUID LEVEL CONTROL 26
MILK FILTRATION
FILTER FRAMES 27, 28 DISPENSERS 55
VACUUM LINE
PVC TANKS & PRE-AIR FILTERS 30 — 35 PLASTIC GATE VALVES 36, 37 PVC PIPE 38 PVC FITTINGS 39 — 44 DRAINS & CHECK VALVES 45 PULSATORS 46 STALL COCKS 46
WASHING
WASH TANKS 47 DRAIN BASKETS 48 NO HUB COUPLINGS 48 DISTRIBUTION TEES 49 BENDER WASHING EQUIPOMENT 50 — 53
LIVESTOCK CARE & MILKHOUSE
LEG BANDS 54 SPRAYERS 54 TOWELS & DISPENSERS 55 FREISH COW BUCKETS 21
3
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
3
MGM Company, Inc. WWW.MGMCOMPANY.COM
We offer a complete line of 3A approved stainless steel fittings, clamps and gaskets. Listed are only those commonly used in the dairy industry. All of the fittings listed are Type 304 Stainless and are Polished ID/OD.
Type 316 Fittings are available upon request.
304 STAINLESS STEEL CLAMPS AND FITTINGS
ISO 9001 Certified Factory
4
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
4
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Tube Size A
152915 1.0” & 1.5” 2.080
152920 2.0” 2.610
152925 2.5” 3.140
152930 3.0” 3.670
152940 4.0” 4.780
Part No. Tube Size A
152105 .50” & .75” 1.062
152115 1.0” & 1.5” 2.122
152120 2.0” 2.654
152125 2.5” 3.185
152130 3.0” 3.717
152140 4.0” 4.820
152160 6.0” 6.695
152161 Wing Nut w/hole
304 STAINLESS STEEL CLAMPS
Heavy Duty Clamp Single Pin 13MHHM
Part No. Tube Size A
152710 1.0” & 1.5” 2.122
152712 2.0” 2.654
152716 2.5” 3.185
152713 3.0” 3.717
152714 4.0” 4.820
V Insert Clamp 13WGC Dairy Clamp (Thumb Screw)
Adjustable Toggle Clamp 13MHLA
Part No. SAE Size Min Max Min Max
150000 6 .44 .78 11 20
150003 12 .69 1.25 18 32
150007 28 1.31 2.25 33 57
Part No. SAE Size Min Max Min Max
150008 32 1.56 2.50 40 64
150009 36 1.81 2.75 46 70
150012 48 2.56 3.50 65 89
150013 52 2.81 3.75 71 95
150014 56 3.06 4.00 78 102
150015 60 3.31 4.25 84 108
150019 88 5.06 6.00 129 152
150022 116 6.50 7.75 165 197
152955 128SS 5.69 8.50 144 216
150025 152 7.19 10.00 182 254
150027 176 8.69 11.50 225 292
150029 200 10.19 13.00 259 330
150033 248 13.19 16.00 335 406
Series 300 Marine Grade Gold Seal 1/2” wide worm gear clamps are constructed of all stainless steel. The all stainless steel 300 clamp provides for better corrosion re-sistance when used in applications where there are high concentra-tions of chlorides. This feature makes it an ideal fit in the dairy industry. Clamps are available in boxes of 10 or bulk stock. Boxes of 10 are ideal for distribution to dealers with service and installa-tion trucks.
Stainless Steel Band Clamps.
5
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
5
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Tube Size A B C
152210 1.0” 1.125 .8760 1.00
152215 1.5” 1.125 1.370 1.50
152220 2.0” 1.125 1.870 2.00
152225 2.5” 1.125 2.370 2.50
152230 3.0” 1.125 2.870 3.00
152240 4.0” 1.125 3.834 4.00
Part No. Tube Size A B C
152410 1.0” .500 .8700 1.00
152415 1.5” .500 1.370 1.50
152420 2.0” .500 1.870 2.00
152425 2.5” .500 2.370 2.50
152430 3.0” .500 2.870 3.00
152440 4.0” .625 3.834 4.00
Long Butt Weld Ferrule L14AM
Short Weld Ferrule 14WMPS
Roll on Ferrule 14RMP
Part No. Tube Size A B
152310 1.0” .7500 1.005
152315 1.5” 1.125 1.505
152320 2.0” 1.312 2.005
152325 2.5” 1.375 2.505
152330 3.0” 1.437 3.005
152340 4.0” 1.500 4.005
Tank Welding Ferrule Light 14WLMP
Part No. Tube Size A B C
152450 1.5” 3.00 1.370 1.50
152451 2.0” 3.00 1.870 2.00
152452 2.5” 3.00 2.370 2.50
152453 3.0” 4.00 2.870 3.00
152454 4.0” 4.00 3.834 4.00
Ferrule Short Threaded 15TFRS
Part No. Tube Size A B
154050 1.0” .718 .870
154051 1.5” .718 1.370
154052 2.0” .750 1.870
154053 2.5” .875 2.700
154054 3.0” .906 2.870
154055 4.0” 1.031 3.834
304 STAINLESS STEEL FERRULES
6
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
6
MGM Company, Inc. WWW.MGMCOMPANY.COM
304 STAINLESS STEEL FERRULES
Part No. Tube Size A B
154000 1.0” 1.375 .870
154001 1.5” 1.500 1.370
154002 2.0” 1.500 1.870
154003 2.5” 1.750 2.370
154004 3.0” 1.750 2.870
154005 4.0” 1.750 3.834
Part No. Tube Size A B
154010 1.0” .812 1.000
154011 1.5” 1.125 1.500
154012 2.0” 1.375 2.000
154013 2.5” 1.500 2.500
154014 3.0” 1.675 3.000
154015 4.0” 1.675 4.000
Part No. Tube Size A B
154020 1.0” .718 .870
154021 1.5” .718 1.370
154022 2.0” .750 1.870
154023 2.5” .875 2.370
154024 3.0” .906 2.870
154025 4.0” 1.031 3.834
Part No. Tube Size A B
154030 1.0” 1.375 .870
154031 1.5” 1.500 1.370
154032 2.0” 1.500 1.870
154033 2.5” 1.750 2.370
154034 3.0” 1.750 2.870
154035 4.0” 1.750 3.834
Ferrule Long Threaded 15A
Ferrule Threaded Roll-On 15R
Ferrule Short Plain 14PRFS
Ferrule Long Plain L14A
Ferrule Roll-On Plain 14R
Part No. Tube Size A B
154040 1.0” .750 1.000
154041 1.5” 1.125 1.500
154042 2.0” 1.312 2.000
154043 2.5” 1.375 2.500
154044 3.0” 1.437 3.000
154045 4.0” 1.500 4.000
7
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
7
MGM Company, Inc. WWW.MGMCOMPANY.COM
ECCENTRIC NIPPLED END CAPS
End cap– 1.5” 2” 2.5” 3”
INLET O.D.”
5/8” 152654E 152659E 152623E 152633E
3/4” 152653E 152622E NA 152662E
7/8” 152655E 152661E NA NA
1” 152651 152621E NA NA
CONCENTRIC NIPPLED END CAPS
End cap– 1.5” 2” 2.5” 3”
INLET O.D.”
5/8” 152654 152659 152623 152663
3/4” 152653 152622 NA 152662
7/8” 152655 152661 NA NA
1” 152652 152621 NA NA
CONCENTRIC
ECCENTRIC
Stainless Steel Bevel Seat Solid End Cap 16A.
White Poly Bevel Seat End Caps.
Part No. Tube Size A
154081 1.0” 1.312
154082 1.5” 1.843
154083 2.0” 2.375
154084 2.5” 2.906
154085 3.0” 3.437
154086 4.0” 4.500
Stainless Steel Clamp Solid End Cap 16AMP
A B Tube Size Part No.
152615 1.0” & 1.5” .250 1.984
.250 2.516 2.0” 152620
.250 3.047 2.5” 152625
.250 3.579 3.0” 152630
.312 4.682 4.0” 152640
Part No. Tube Size A
192001 1.5” 1.843
192002 2.0” 2.375
192003 3.0” 3.437
304 STAINLESS STEEL END CAPS
8
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
8
MGM Company, Inc. WWW.MGMCOMPANY.COM
Elbow Clamp 900 2CMP Clamp Ends
Part No. Tube Size A R
152709 1.0” 2.000 1.500
152715 1.5” 2.750 2.250
152720 2.0” 3.500 3.000
152725 2.5” 4.250 3.750
152730 3.0” 5.000 4.500
152740 4.0” 6.625 6.000
Part No. Tube Size A R
152754 1.0” 1.125 1.500
152755 1. 5” 1.437 2.250
152757 2.0” 1.750 3.000
152759 2.5” 2.062 3.750
152761 3.0” 2.375 4.500
152763 4.0” 3.125 6.000
Part No. Tube Size A B Wall
152475 1.5” 3.438 2.937 .065
152476 2.0” 4.562 4.062 .065
152477 2.5” 5.688 5.187 .065
152478 3.0” 6.812 6.312 .065
152479 4.0” 8.937 8.312 .083
Elbow Clamp 900 x Butt-weld L2CM
Elbow Clamp 450 2KMP Clamp Ends
304 STAINLESS STEEL ELBOWS
Part No. Tube Size A B Wall
152470 1.5” 1.625 2.125 .065
152471 2.0” 2.312 2.812 .065
152472 2.5” 3.000 3.500 .065
152473 3.0” 3.688 4.188 .065
152474 4.0” 4.812 5.437 .083
Elbow Clamp 450 x Butt-weld 2KM
Elbow Clamp 900 w/ Hex Nut & Bevel Plain End 2FMP-14
Part No. Tube Size A B
154070 1.5” 2.750 2.968
154071 2.0” 3.500 3.750
154072 2.5” 4.250 4.625
154073 3.0” 5.000 5.406
154074 4.0” 6.625 7.031
9
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
9
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Tube Size A Wall
152840 1.0” 2.062 .065
152841 1.5” 2.937 .065
152842 2.0” 4.062 .065
152843 2.5” 5.187 .065
152844 3.0” 6.312 .065
152845 4.0” 8.312 .083
Part No. Tube Size A Wall
152850 1.0” 1.500 .065
152851 1 5” 2.250 .065
152852 2.0” 3.000 .065
152853 2.5” 3.750 .065
152854 3.0” 4.500 .065
152855 4.0” 6.000 .083
Part No. Tube Size A Wall
152860 1.0” 1.188 .065
152861 1.5” 1.625 .065
152862 2.0” 2.312 .065
152863 2.5” 3.000 .065
152864 3.0” 3.688 .065
152865 4.0” 4.812 .083
Part No. Tube Size A R Wall
152870 1.0” .625 1.50 .065
152871 1.5” .937 2.25 .065
152872 2.0” 1.250 3.00 .065
152873 2.5” 1.562 3.75 .065
152874 3.0” 1.875 4.50 .065
152875 4.0” 2.500 6.00 .083
304 STAINLESS STEEL ELBOWS
Elbow Long Butt-weld 900 2S
Elbow Short Butt-weld 900 2WCL
Elbow Long Butt-weld 450 2KS
Elbow Short Butt-weld 450 2WK
U Bend Mitered
Part No. Tube Size A B
155866 2.0” 6.00 7.000
155867 3.0” 6.00 7.800
155868 4.0” 9.00 9.500
10
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
10
MGM Company, Inc. WWW.MGMCOMPANY.COM
Reducing Tee Clamp Ends 7RMP
Tee Clamp 7MP
Part No. Tube Size A B
152960 1.0” 4.750 2.375
152961 1.5” 5.500 2.750
152962 2.0” 7.000 3.500
152963 2.5” 7.000 3.500
152964 3.0” 7.500 3.750
152965 4.0” 9.000 4.500
Part no. A B C Tube Size
152967 5.125 2.562 2.406 2.0” x 1.5”
152969 5.688 2.844 2.812 2.5” x 2.0”
152970 6.188 3.093 2.906 3.0” x 1.5”
152971 6.188 3.093 3.063 3.0” x 2.0”
152972 8.125 4.063 3.563 4.0” x 2.0”
Part No. Tube Size A B Wall
152880 1.0” 3.75 1.875 .065
152881 1.5” 4.50 2.250 .065
152882 2.0” 6.00 3.000 .065
152883 2.5” 6.00 3.000 .065
152884 3.0” 6.50 3.250 .065
152885 4.0” 7.75 3.875 .083
Tee Long Butt-weld L7WWW
Tee Short Butt-weld 7WWW
Part No. Tube Size A Wall B
152886 1.0” 2.25 .065 1.125
152887 1.5” 3.312 .065 1.656
152888 2.0” 4.124 .065 2.062
152889 2.5” 4.688 .065 2.344
152890 3.0” 5.188 .065 2.594
152891 4.0” 6.876 .083 3.438
304 STAINLESS STEEL TEES
Lateral Y Clamp 28AMP
Part No. Tube Size A B C
152500 1.0” 7.000 1.500 5.500
152501 1.5” 8.375 1.688 6.688
152502 2.0” 9.750 2.125 7.625
152503 2.5” 11.000 2.000 9.000
152504 3.0” 11.750 2.375 9.375
11
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
11
MGM Company, Inc. WWW.MGMCOMPANY.COM
304 STAINLESS STEEL ADAPTORS
Part No. Tube Size A
154060 1.5” 1.843
154061 2.0” 1.875
154062 2.5” 2.000
154063 3.0” 2.031
154064 4.0” 2.344
Part No. Tube Size A B
152459 1.5” x 1.5” 1.687 1.50
152460 2.0” x 2.0” 2.312 2.00
152461 2.5” x 2.5” 2.344 2.50
152462 3.0” x 3.0” 3.094 3.00
152463 4.0” x 4.0” 3.406 4.00
Clamp X Thread Adaptor 17MP-15
Clamp X Hose Adaptor 14MPHR. Non 3A.
Part No. Tube Size A B
152464 1.0” x 1.0” 2.250 .985
152465 1.5” x 1.5” 2.250 1.025
152466 2.0” x 2.0” 2.638 1.058
152467 3.0” x 3.0” 3.070 1.634
Adaptor Clamp x Male NPT 21MP– N.P.T. Pipe Thread Non-3A
Adaptor Clamp x Hex nut 17MP-14
Part No. Tube Size A
152510 1.5” x 1.5” 3.00
152511 2.0” x 2.0” 3.00
152512 3.0” x 3.0” 3.75
In Line Ball Check Valve
Part No. Description A
152700 1.5” Check Valve Complete 2.5”
152701 Ball for 1.5” Valve
152702 Pin For 1.5” Valve
152705 2.0” Check Valve Complete 2.5”
152706 Ball for 2.0” Valve
152707 Pin for 2.0” Valve
12
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
12
MGM Company, Inc. WWW.MGMCOMPANY.COM
304 STAINLESS STEEL REDUCERS
Part No. Tube Size A
154077 2.0” x 1.5” 3.468
154078 3.0” x 2.0” 5.656
Concentric Reducer Plain Bevel X Threaded. B3115.
Reducer Butt-weld Concentric L31W
Part No. Tube Size A B C Wall
152900 1.5” x 1.0” 2.00 1.50 1.00 .065
152901 2.0” x 1.5” 2.00 2.00 1.50 .065
152902 2.5” x 1.5” 4.00 2.50 1.50 .065
152903 2.5” x 2.0” 2.00 2.50 2.00 .065
152904 3.0” x 1.5” 6.00 3.00 1.50 .065
152905 3.0” x 2.0” 4.00 3.00 2.00 .065
152906 3.0” x 2.5” 2.00 3.00 2.50 .065
152907 4.0” x 3.0” 4.00 4.00 3.00 .083
Part No. Tube Size A B C Wall
152990 1.5” x 1.0” 2.00 1.50 1.00 .065
152991 2.0” x 1.5” 2.00 2.00 1.50 .065
152992 2.5” x 2.0” 2.00 2.50 2.00 .065
152993 3.0” x 1.5” 6.00 3.00 1.50 .065
152994 3.0” x 2.0” 4.00 3.00 2.00 .065
152995 3.0” x 2.5” 2.00 3.00 2.50 .065
152996 4.0” x 3.0” 4.00 4.00 3.00 .083
Reducer Butt-weld Eccentric L32W
Reducer Clamp Concentric 3114MP
Part No. Tube Size A
152830 2.0” x 1.5” 3.000
152831 2.5” x 1.5” 3.000
152832 2.5” x 2.0” 3.000
152833 3.0” x 1.5” 7.000
152834 3.0” x 2.0” 5.000
152835 3.0” x 2.5” 3.000
152836 4”.0” x 3.0” 5.125
Part No. Tube Size A
152486 2.0” x 1.5” 3.000
152487 2.5” x 2.0” 3.000
152488 3.0” x 1.5” 7.000
152489 3.0” x 2.0” 5.000
152490 4.0” x 3.0” 5.125
Reducer Clamp Eccentric 3214MP
13
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
13
MGM Company, Inc. WWW.MGMCOMPANY.COM
304 STAINLESS STEEL REDUCERS HEX NUTS & WRENCHES
Bevel Seat Hex Nut Stainless steel. 13H.
Wall Plate #29. Stainless steel decorative wall plate used on milk like tubing.
Part No. Tube Size A B
152010 1.0” .906 1.812
152015 1.5” .968 2.406
152020 2.0” 1.062 3.000
152025 2.5” 1.870 3.594
152030 3.0” 1.281 4.188
152040 4.0” 1.500 5.438
Part No. Tube Size A B C
154090 1.5” x 1.0” 12.000 2.406 1.812
154091 2.0” x 1.5” 14.000 3.002 2.406
154092 2.5” x 2.0” 16.500 3.594 3.000
154093 3.0” x 2.0” 18.000 4.188 3.000
154094 3.0” x 2.5” 18.000 4.188 3.594
Double End Hex Wrench 25HA
Single End Hex Wrench 25H
Part No. Tube Size A B
154095 1.0” 10.500 1.812
154096 1.5” 12.000 2.406
154097 2.0” 14.000 3.000
154098 2.5” 16.250 3.594
154099 3.0” 18.500 4.188
154100 4.0” 19.500 5.438
Part No. Tube Size A B
154105 1.0” 1.0 5.0
154106 1.5” 1.5 5.0
154107 2.0” 2.0 5.0
154108 2.5” 2.5 6.0
154109 3.0” 3.0 6.0
154110 4.0” 4.0 7.0
Bevel Seat White Poly Hex Nut.13H.
Part No. Tube Size A B
192008 1.5” .968 2.406
192011 2.0” 1.062 3.000
192013 3.0” 1.281 4.188
Concentric Reducer Threaded X Clamp B15C31
Part No. Tube Size A
154080 2.0” x 1.5” 3.250
Part No. Tube Size A
154079 2.0” x 1.5” 3.220
Concentric Reducer Plain Bevel x Clamp B14C31.
14
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
14
MGM Company, Inc. WWW.MGMCOMPANY.COM
AIR BLOW & Y- BALL CHECK VALVES
This valve is designed to pressurize lines with air to clean out product or cleaning solutions. It is failsafe because the simple air-to-open spring-to-close mechanism prevents back flow. Normally used with a Y-ball Check Valve.
Features: -316 Stainless Steel Construction -Sizes for 1 1/2” to 4” -Conforms to 3A accepted practice 604-05 -Filter required for use with milk
Sizing Guide
When using Y-Ball Check Valve
Use Air Blow Valve
1.5” 2.0”
2.0” 2.5”
2.5” 3.0”
Complete Valve W/ Quick Connect Air Connection
Complete Valve W/ FNPT .50” Air Connection
Size
152726 158150 1.5”
152727 158195 2.0”
152728 158200 2.5”
158203 158205 3.0”
Y-Ball Check Valves
These valve are used to prevent reverse flow in systems moving liquid products. When the liquid flows into the inlet, the PTFE ball rolls up in the branch of the valve allowing full fluid flow. When the flow stops, equalizing the pressure, the ball rolls back into the seat, preventing back flow.
Features of both models: -Polished ID & OD to 3A Standards. -316 stainless steel construction -Air Blow Valve can be added. -Maximum temperature rating of 250 F.
Part No. Complete Valve Line Size
155203 1.5”
155204 2.0”
155205 3.0”
Air Blow Valve
Part No. Complete Valve Line Size
155115 1.5”
155116 2.0”
Single Piece Model Two Piece Model
In Line Ball Check Valve Part No. Description A
152700 1.5” Check Valve Complete 2.5”
152701 Ball for 1.5” Valve
152702 Pin For 1.5” Valve
152705 2.0” Check Valve Complete 2.5”
152706 Ball for 2.0” Valve
152707 Pin for 2.0” Valve
15
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
15
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Ref. No. Description
155230 4, 4A, 4B, 4C, 4D Air Blow Valve Service Kit
152120 2 Heavy Duty Clamp
181515 4 1.5” Gasket w/#10 Screen
155215 Repl. Filter Box of 200
Y-Ball Check Valve Parts
Part No. Ref. No. Description
155221 5A Ball Teflon for 1.5” Y-Ball Valve
155220 5A Ball Teflon for 2.0” Y-Ball Valve
155222 5B Seat for 1.5” Y-Ball Valve
155223 5B Seat for 2.0” Y-Ball Valve
152120 3 2.0” Heavy Duty Clamp
152125 3 2.5” Heavy Duty Clamp
152620 4 2.0” Solid End Cap
152625 4 2.5” Solid End Cap
159754 1.5” Ball and Seat Kit
159755 2.0” Ball and Seat Kit
Repair kits, containing a cap clamp gasket, ball and EPDM/CF-8M seat are available.
AIR BLOW & Y- BALL CHECK VALVES SPARE PARTS
Part No. Description
155210 Ball Buna for 1.5” Y-Ball Valve
155211 Ball Viton for 1.5” Y-Ball Valve
155212 Ball Buna for 2.0” Y-Ball Valve
155213 Ball Viton for 2.0” Y-Ball Valve
152120 2.0” Heavy Duty Clamp
152125 2.5” Heavy Duty Clamp
152620 2.0” Solid End Cap
152625 2.5” Solid End Cap
Parts for Single Piece Valve Parts for Single Piece Valve
Service Kit Contains: 1-304 SS Spring, 1-SS Screen w/gasket, 1-Stem Guide, 1-304 SS Retainer, 1-304 SS Stem w/plug.
Parts for Air Blow Valves
16
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
16
MGM Company, Inc. WWW.MGMCOMPANY.COM
STAINLESS BUTTERFLY VALVES
Part No. Tube Size D
153010 1.0” 3.50
153015 1.5” 3.50
153020 2.0” 3.80
153025 2.5” 3.80
153030 3.0” 4.10
153040 4.0” 4.80
Part No. Tube Size A
153071 1.5” 3.50
153072 2.0” 3.80
153073 3.0” 4.10
Part No. Tube Size A
153075 1.5” 1.90
153077 2.0” 2.00
153079 3.0” 2.50
Part No. Tube Size A
153049 1.5” 3.50
153050 2.0” 3.80
153051 3.0” 4.10
SPARE PARTS FOR BUTTERFLY VALVES
Part No. Description
153052 Handle w/Locking Assy. for 1.0” to 3.0” Valve
153054 Handle w/Locking Assy. for 4.0” Valve
153053 Black Knob for Handle
152413 Bolt for all Valves
152142 Set screw for all Valves
152143 Wing Nut only
Silicone Seat (red) Size EPDM (black)
153090 1.0” 153091
153055 1.5” 153056
153057 2.0” 153058
153059 2.5” 153060
153061 3.0” 153062
153063 4.0” 153064
REPLACEMENT SEALS
4 position locking handle – assembled with wing nuts for easy seal replacement - silicone seals standard – 304 Stainless Polished ID/OD
Part No. Tube Size A
153045 1.5” 3.50
153047 2.0” 3.80
CLAMP X CLAMP BUTTERFLY VALVE
THREAD X THREAD BUTTERFLY VALVE
WELD X WELD BUTTERFLY VALVE
THREAD X MALVE BEVEL SEAT WITH CAPTIVE HEX NUT BUTTERFLY VALVE
THREAD X CLAMP BUTTERFLY VALVE
17
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
17
MGM Company, Inc. WWW.MGMCOMPANY.COM
MGM Company offers a fill line of approved clamp and bevel seat pipeline gaskets. Select from Buna (rubber), Teflon, EPDM or silicone. We also stock replacement valve O-rings and tabbed valve gaskets. We will source special rubber components.
PIPELINE GASKETS
DUCKBILL DRAINS
FLAPPER VALVES
RUBBER COUPLINGS FOR VACUUM LINES
NO HUB COUPLINGS FOR DRAIN INSTALLATIONS
MILKLINE INLET CLOSURES
MILK VALVE PAD GASKETS
GASKETS W/STAINLESS STEEL SCREENS
SANITARY GASKETS, SCREENS & RUBBER COMPONENTS
18
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
18
MGM Company, Inc. WWW.MGMCOMPANY.COM
REFERENCE SIZE’
1.0” 1.5” 2.0” 2.5” 3.0’ 4.0”
40B Buna Clamp Gasket
181110 181115 181120 181125 181130 181140
40T Teflon Clamp Gasket
181410 181415 181420 181425 181430 181440
40F Flanged Buna Clamp Gasket
181310 181315 181320 181325 181330 181340
Clamp Gasket w/#10 stainless Screen
181515 181520 181525 181530 181540
40S Silicone Clamp Gasket 182410 182415 182420 182425 182430 182440
40WS Rubber gasket for Surge Ferruled Lines.
181341 181342
40BST Teflon Bevel Seat Gasket
181450 181451 181452 181453 181454
SURGE Flapper for 1.5” line With Surge ferrule w/ 1.0” Flap.
276075
Delaval Standard Thick Flapper for 1.5” Line w/.75” Flap.
275069
Westfalia Flapper for 1.5” line w/1.25” flap.
275070
T C Flapper for 1.5” & 2.0” For BouMatic & Classic Valve w/1.25” flap.
271207 271209
40BSO Bevel Seat Gasket
181210 181215 181220 181225 181230 181240
Bevel Seat EPDM 181211 181216 181221 181226 181231 181241
Bevel Seat Thin (Snap-Tite) 181015 181020
Glass Coupling Gasket 181010
SANITARY GASKETS & FLAPPER VALVES
19
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
19
MGM Company, Inc. WWW.MGMCOMPANY.COM
PIPELINE HANGERS
Complete # Tube Size A B Sleeve only #
195200 1.0” 3.425 1.450 195206
195201 1.5” 4.000 2.125 195207
195202 2.0” 4.500 2.500 195208
195203 2.5” 4.750 3.125 195209
195204 3.0” 5.500 3.750 195210
195205 4.0” 6.750 4.750 195211
Stainless Steel 2 piece Hex Hanger with ABS Sleeves.
Complete # Tube Size A B Grommet only#
195220 1.0” 3.425 1.450 195226
195221 1.5” 4.000 2.125 195226
195222 2.0” 4.500 2.500 195226
195223 2.5” 4.750 3.125 195226
195224 3.0” 5.500 3.750 195226
195225 4.0” 6.750 4.750 195226
Stainless Steel 2 piece Hex Hanger with Rubber Grommets.
195100 U Hanger 6.5” only 195101 U Hanger 7.5” Extra Wide only 195103 U Hanger Kit for 2.5” & 3.0” Line 195107 Hanger clips only
195105 Extended U Hanger only 195108 Extended U Hanger Kit for 2.5” & 3.0” line 195107 Hanger Clips only
195104 L Hanger only 195110 L Hanger Kit for 2.5” & 3.0” Line 195107 Hanger Clip only
Block Style Pipe Line Hangers 195300 1.0” Hanger Complete for SS tubing. 195301 1.5” Hanger Complete for SS tubing. 195302 2.0” Hanger Complete for SS tubing 195303 2.5” Hanger Complete for SS tubing. 195304 3.0” Hanger Complete for SS tubing. 195305 4.0” Hanger Complete for SS tubing. 195306 Stainless Steel Mounting Rail 48” 195433 1.5” Hanger Complete for PVC Pipe 195434 2.0” Hanger Complete for PVC Pipe 195435 3.0” Hanger Complete for PVC Pipe
U-Hanger with Blue Plas-tic Coating.
Extended U-Hanger with Blue Plastic Coating.
L-Hanger with Blue Plas-tic Coating.
Block Style Pipe Line Hanger. (For stainless steel tubing & PVC pipe.
20
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
20
MGM Company, Inc. WWW.MGMCOMPANY.COM
Blue Plastic Milk valve . The standard in the industry.
MILK VALVES & INLETS
Part No. Description
213115 1.5” Valve Complete
213120 2.0” Valve Complete
213125 2.5” Valve Complete
213130 3.0“ Valve Complete
213102 Square Pad Gasket
213100 O-Ring (for under the SS slide)
Complete Milk Inlet
Milk Line Size
Nipple ID-OD (inches)
Nipple only (4)
Gasket (2)
Clamp (3)
Nipple ID-OD (mm)
215175 1.5” - 2.0” 9/16 –5/8 NA 213111 213116 14-16
215180 1.5” - 2.0” 5/8-3/4 215200 213110 213116 16-18
215190 2.5” - 3.0” 5/8-3/4 215200 213110 213118 16-18
213114 1.5” - 2.0” 13/16-7/8 215220 213112 213116 20-22
215210 2.5” - 3.0” 13/16 -7/8 215220 213112 213118 20-22
215230 3.0” - 4.0” 13/16-7/8 215220 213112 213140 20-22
215232 3.0” - 4.0” 15/16-1.0 NA 213113 213140 24-26
Part No. Description
213150 1.5” Valve Complete (Strangko)
213152 2.0” Valve Complete (Strangko)
Milk inlets Strap-On straight with stainless steel clamp. Designed to fit milk lines from 1.5” to 4.0”.
Stainless Steel Gooseneck’s.
Stainless steel gooseneck /cane for older Sta-Rite/Universal Vac-Sav milk valves. Slide base is 1 7/8” x 1 7/8”. Fits 5/8” milk hose. 213107 Universal Vac-Sav Cane/gooseneck
Blue Plastic milk Valve
Gooseneck/canes fit all the slides on blue plastic and stainless steel milk valves.
Vac-Sav Stainless Steel Gooseneck’s.
Strap-on Milk Inlets
Part No. Description
213108 Gooseneck Standard 90D 5/8”
213109 Gooseneck Reverse 90D 5/8”
21
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
21
MGM Company, Inc. WWW.MGMCOMPANY.COM
242006 Valve Plastic 5/8”
245104 Tabbed Gasket
245110 O-Ring
A-242010 Window for IBA & BouMatic barrel claws. 2 3/16” ID x 2 7/16” OD x 1/4”. B-242011 Claw gasket 2 3/16” x 2 7/16” x1.4” Fits BouMatic & IBA. (Gray) B-242012 Flat claw gasket 2 11/16”x 3”. For Germania style claw.
245100 Delrin 5/8”
245101 Delrin Vented 5/8”
245107 Delrin 3/4”
245108 Delrin 3/4” vented
245103 O-ring for 5/8”
245104 Tabbed gasket for 5/8”
Delrin Valve White Plastic Valve
Standard Fresh Cow Lid
Fits all stainless steel and poly buckets. With rap around gasket.
241300 Lid w/Gasket for 5/8” milk hose.
241302 Gasket only
Squeeze Clamp (Snap/pinch Clamp)
241117 For 5/8” ID Hose
241118 For 3/4” ID Hose
All stainless steel construction.
CLAWS - SHUT OFFS - FRESH COW - MILKER SHELLS
Stainless Steel Valve Parts (Tesa Valve)
242008 O-Ring (top)
242009 Tabbed Gasket (bottom)
242019 Seal Kit w/O-ring & gasket
Stainless Steel Shells
241240 DeLaval Rolled Edge 06 Shell.
242100 Tapered stainless Surge style with satin finish.
242105 Standard Bou-Matic stainless shell w/ribbed top.
AIR FORKS
TYPE 304- ELECTRO POLISHED & PLASTIC
241252 A Single – Single puls 3/8” OD x 1/4” ID
241247 B Twin — Front to Back 3/8” OD x 1/4” ID
241250 B Twin—Front to Back 5/16” OD x 9/32” ID
241264 C Twin Plastic -Front to Back 3/8” OD x 1/4” ID
241254 D Twin—Germania Style 5/16” OD x 9/32” ID
241256 D Twin —Germania Style 3/8” OD x 1.4” ID
241248 E Twin — Side to Side 3/8” OD x 1/4” ID
Air Forks Stainless steel & Plastic.
22
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
22
MGM Company, Inc. WWW.MGMCOMPANY.COM
COMPLETE RECEIVER GROUPS
MGM Company can offer complete milk receiver assemblies to meet your customers needs. We also offer a complete list of component parts and assemblies to keep the milk receiver system maintained in top working order. Listed below is a system installation and spare parts ordering guide for all of our parts and components. Call us for your complete receiver assemblies.
Ref. No. Part No. Description
1 Specify Motor for Pump
2 Specify Flapper Check Valve Location
3 152915 V-Insert Clamp 1.5”
3 181115 Pipeline Gasket 1.5”
4 Specify Receiver Stand
5 246047 Leg Set (3) for Stand
6 Specify Liquid level Control
7 Specify Custom Receiver Vessel
8 276004 Gasket for 18” diameter receiver cover
8 10026 Gasket for 26” diameter receiver cover
9 276065 3 Point Probe Assembly
Ref. No. Part No. Description
10 276003 Receiver Cover for 18” diameter receiver
10 10025 Receiver Cover For 26” diameter receiver
11 Specify Milk Inlet Custom
12 Specify J-Bend Trap Connector
12 Specify U-Bend Trap Connector
13 152930 V-insert Clamp 3”
13 181130 Pipe Line Gasket 3”
14 Specify Custom Vacuum Inlet
15 Specify Moisture Trap Complete
16 Specify Milk Pump Complete
301264 Vacuum Drain Valve w/Elbow (not Shown)
Receiver Parts Breakout
23
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
23
MGM Company, Inc. WWW.MGMCOMPANY.COM
CUSTOM RECEIVER VESSELS
Milk Receiver Order Form. (Please photocopy and use this form when ordering custom receivers. Stainless steel receivers may be ordered with inlets welded at specific heights and locations on the receiver. Using the top view below, mark the milk and vacuum connections locations. For fabrication purposes the milk pump connection is always at the 90 degree location. On the side view, draw in the height of the milk inlets using the center line of the milk pump connection as a starting location. Please allow for 4 weeks to fabricate the receiver plus shipping time to your location.
1. Size: Check one of the options listed.
Diameter X Height Capacity Milk Pump Connection
14” x 18” 10 Gallon 1.5” Ferruled
18” x18” 16 Gallon 1.5” Ferruled
18” x 24” 24 Gallon 1.5” Ferruled
Diameter X Height Capacity Milk Pump Connection
26” x 24” 50 Gallon 1.5” Ferruled
26” x 24” 50 Gallon 2.0” Ferruled
2. Milk & Vacuum inlet options. Check size and number of inlets.
Size Connection Option
2.0” Clamp Straight
2.0” Weld Straight
2.0” Clamp 45 Degree
2.5” Clamp Straight
3.0” Clamp Straight
Size Connection Option
3.0” Weld Straight
3.0” Clamp 45 Degree
4.0” Clamp Straight
4.0” Weld Straight
4.0” Clamp 45 Degree
Order Date:___________________ PO #:__________________ Expected Delivery Date:___________________________________________ Account Name:________________________________ Account Number:______________ Contact:_________________________________ Street Address:_________________________________ City:__________ _____State/Prov:___________ Zip/Postal Code_________________ Signature (Required)____________________________ Best way to contact if questions:___________________________________________ (phone, fax, email)
Receivers do not come with covers and gaskets. Please see page 26 for cover and gasket options.
24
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
24
MGM Company, Inc. WWW.MGMCOMPANY.COM
Stainless steel horizontal traps come with a see through Lexan cover, gasket and plastic float ball. 12” diameter x 18” long. (8 gallon Capacity) 276006 3.0” x 3.0” jumbo Trap Complete, clamp x male NPT 276008 3.0” x 3.0” jumbo Trap Complete, clamp x clamp. 276009 4.0” x 4.0” jumbo Trap Complete, clamp x male NPT 276012 4.0” x 4.0” jumbo Trap Complete, clamp x clamp. 276015 Trap Gasket only 11.0”ID x 13.0”OD. 275072 Replacement Lid w/gasket & Stainless Hanger Tab
Stainless steel vertical traps parts. 276052 Complete 24 QT. Stainless Steel Trap with 3.0” X 3.0” clamp connections. 276056 Replacement lid w/3.0” holes for 12 Qt. Trap. 276055 Replacement float ball only for 2.0” trap. 276054 Gasket for 24 Quart Vertical Trap 8.5” ID x 9.5” OD. 276071 Duck Bill Drain 276080 Rubber Cover for 3.0” White Ripple Plastic Trap. ( For clean out inlet)
U-Bend are used to connect horizontal traps to receiver. 276040 3.0” x 20.0” U-Bend with clamp x clamp ends 276045 4.0” x 30.5” U-Bend with clamp x clamp ends.
J-Bend are used to connect vertical trap to receiver. 276049 2.0” J-Bend w/ clamp x male NPT ends. 276048 3.0” J-Bend w/ clamp x male NPY ends. 276047 3.0” J- Bend w/ clamp x clamp ends (SPECIAL).
276068 Floor Stand Complete for 18” diameter receivers w/out legs. 276070 Floor Stand Complete for 26” diameter receivers w/out legs. 246074 Leg set for floor stands.
Replacement Trap Float Balls 276057 60 mm HDPE Float Ball 276055 2.375” Plastic Ball for 2.0” traps. 276017 3.50” Plastic Ball 276018 4.25” Plastic ball for 3.0” traps. 276024 4.90” Plastic Ball for 4.0” traps. 276020 4.0” Stainless Steel Ball w/weighted side. 276025 5.0” Stainless Steel Ball w/weighted side. 276030 6.0” Plastic Ball
RECEIVER & VACUUM LINE COMPONENTS
Moisture Trap Balls
Jumbo Horizontal Moisture Traps
Vertical Moisture Traps & Parts
Floor Mount Receiver Stands
J-Bend Connections for Receivers
U-Bend Connections for Receivers
Moisture trap balls are rotational molded, from FDA approved poly virgin material. Balls weight about 1 to 1.2 lbs. depend-ing on the ball diameter.
25
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
25
MGM Company, Inc. WWW.MGMCOMPANY.COM
301264 Drain elbow 1.5” x 90D kit. Includes elbow w/7/16” nipple and vacuum operated 4” valve with plastic drain tube. 241202 Diaphragm only 4.0” 241204 Diaphragm only for small drain valve 2.75” 241203 Tuber 3/8”ID x 1/2” OD for drain valve 271205 Vacuum operated 4.0” drain valve only
271208 Valve seat Stainless , for 1.50” connection. 271211 Valve seat Stainless, for 2.0” connection. 275069 Flapper Valve DL Standard (thick) 1.5” 271207 Flapper Valve BM & TC 1.5” 271209 Flapper Valve TC 2.0” 276075 Flapper Valve Surge 1.5” 275070 Flapper Valve Westfalia 1.5”
276001 Clear Acrylic Cover w/1.5” hole for 26” diameter Receiver 276054 Gasket for 26” diameter receiver (8.5” ID x 9.5” OD) 276003 Clear Acrylic Cover & Gasket w/hole for 18” diameter receiver 276004 Gasket for 18” diameter receiver (6.375” x 7.875”) 276100 Clear Cover w/out hole for 18” diameter receiver 276101 Clear Cover w/out hole for 26” diameter receiver
Milk Pump Stainless Steel Check Valve Seats & Flappers.
Vacuum Drain Valve
Receiver Covers & Gaskets
MILK PUMPS
Classic milk pumps are all stainless steel. Pumps are set to run using a 3450 RPM motors with a keyed shaft. (56C Frame Motors.) 27487 Pump assembly is can be used on a 3/4hp to 1hp motor. Pump has 1.5” clamp connection in and out and has a 3.0” 4 blade impeller that is rated to pump 45 gpm with 32 feet of head. 27488 Pump assembly is set up for a 1.5hp to 2.0 hp motor. Pump has 1.5” clamp connection in and out and has a 3.625” 4 blade impeller that is rated to pump 60 gpm at 45 feet of head. Using a 1.5hp motor. 276072 Classic Milk II Pump 3 piece seal kit
RECEIVER COMPONENTs
Thomsen Milk Pumps have a well-earned place in the dairy industry. Thomsen pumps installed on a milk receiver system are under vacuum and have a external seal assembly. This handy cost saving kit is for three horse power models, # 4, #5 & #6. Each kit contains: rotary seal assembly, ceramic seal, housing O-rings for models #4, #5, & #6 and impeller clip. 109222 Thomsen #4, 5 & 6, Milk Pump external seal kit
LC THOMPSON MILK PUMP REPAIR KITS
26
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
26
MGM Company, Inc. WWW.MGMCOMPANY.COM
LIQUID LEVEL CONTROL
Universal use Liquid Level Control with Three Point Probe. Features:
Wash/Manual Switch
Dual Voltage Switch 110/220 volt
NEMA 4 rated water resistance plastic enclosure
Comes With Factory Wiring Suitable for Customer Wiring
Complete Wiring Diagram Included with each unit.
Controls Motors up to 1.5 horse power.
Stainless steel probes can be easily cut to fit smaller receivers at the job site.
Long Probes are 23” long, short probe is 19”long, made of approved stainless steel.
Part No. Description
276059 Complete System w/3 point probe fits 1.5” hole in receiver cover (for 60 Hz 120V electrical requirements)
276060 Complete System w/3point probe, fits 1.5” hole in receiver cover (specify electrical requirements for 50hz 220V overseas use)
276065 Complete 1.5” - 3 point probe assembly. (Probe, cord, cap & holder)
276062 Replacement PC Board for 110V control.
276063 Replacement Cap and Cord assembly.
276064 Replacement 1.5” Nylon 3 point probe holder for receiver cover
276066 Control Box only less probe assembly for 110V.
276067 Complete 2.0” - 3 Point assembly w/ferrule connection
276069 Replacement rubber boot for probe assembly
Liquid Level Control
27
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
27
MGM Company, Inc. WWW.MGMCOMPANY.COM
MILK FILTRATION
MGM is the premier supplier of the original side exit milk filter frame. All frames are made of 304 stainless steel and polished inside and out to a beautiful approved finish. The large milk filter chamber and surface area of the filter insert holder offers better milk filtration, less milk pump back pressure and less sediment blow by.
KEY FEATURES Easier filter change. No need to break the line.
Sizes to fit all types of systems. Built in quality. Each frame is pressure tested before shipment.
All spare parts are available. Made in the USA.
28
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
28
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Closed End Styles Diameter x Length x Ports
1 Body Only 2 Insert only
121502 4 7/8” x 17” x 1.5” 121501 121503
121508 4 7/8” x 33” x 1.5” 121507 121509
121517 4 7/8” x 33“ x 2.0” 121514 121509
121518 4 7/8” x 33” x 2.5” NA 121509
Part No. Open End Styles Diameter x Length x Ports
1 Body Only 2 Insert only
121500 4 7/8” x 17” x 1.5” 121501 Call for Price
121506 4 7/8” x 33” x 1.5” 121507 121510
121512 4 7/8” x 33 “x 2.0” 121514 121510
Part No. Ref. No Description
11140 3 4” Clamp Gasket
121530 4 Top Seal Gasket (white). For 17” & 33” filter.
121531 5 Two Tabbed O-ring. Fir 17” & 33” filter.
152140 6 Heavy Duty Clamp 4.0”.
121532 7 End Plug ( 3 Ear type)
Spare parts list for large capacity milk filter frames. Note end plug is only required on open end models.
MILK FILTERS / STRAINERS
This original large capacity side exit milk filter frame has a closed end that eliminates the rubber end plug. This feature allows for easier filter changing and less sediment blow by. Uses filter socks and only one rub-ber tabbed O-ring to hold the filter on the stainless steel frame. Each frame is precision made and tested before shipment. Comes complete with body, heavy duty clamp, insert and gaskets. NOTE: “copy cat” frame parts are not always interchangeable use only original MGM replacement parts.
The original large capacity open end side exit milk filter frame with rub-ber end plug. Other copy cat frames parts do not interchange.
MAINTAINENCE: All rubber components should be inspected and replaced fre-quently.
SMALLER CAPACITY MILK FILTER FRAMES
Part No. Description
121533 Side Exit Filter 2.25” x 24” x 1.5” Closed End
121522 Side Exit Filter 3” x 23.5” x 1.5” Closed End
121520 Body only for 3.0 X23.5” filter
121536 Top white Seal for 2.25” x 24” Side Exit Filter.
121537 Filter hold O-Ring for 2.5 x 24” filter.
121538 Top white seal only for 3’ x 23” filter side exit.
121534 Filter hold O-ring for 3” x 23” filter.
121535 O-Ring For Rodgers 2.5” filter frame.
29
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
29
MGM Company, Inc. WWW.MGMCOMPANY.COM
MGM offers a complete line of vacuum line components in low cost, attractive, easy to use White PVC
Pre Air Filters for 1 or 2 Vacuum Pump Systems (100% stainless filters inside)
White PVC Pipe 1.5” through 8”
Complete line of White PVC Fittings 1” through 8”
Metric Adapters 3” x 75mm & 4” x 110mm
Others sizes available on request
Vacuum Tanks 20 to 100+ Gallon Capacity
Complete line of Valterra® Gate Valves in Inch and Metric sizes 1.5” to 8”
50mm to 160mm Anti Reverse Valves / Check Valves
White PVC
Integrated Vacuum Line System
VACUUM SYTEM COMPONENTS
30
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
30
MGM Company, Inc. WWW.MGMCOMPANY.COM
MGM has been the pioneer in the development and marketing of PVC Vacuum Tanks and Pre Air Filters. We are the exclusive agent for The Har-
rington Corporation ( HARCO ).the premier manufacturer of PVC tanks. All MGM PVC tanks are manufactured from specially formulated resin
compounds to assure uniform color, strength and fit of all inlets and end caps. All MGM tanks feature domed end caps for added strength . Precise
quality control standards guarantee vertical inlets are in line to a tolerance of +/- 1º. We have an extensive line of standard sizes and configura-
tions from in 12 to 15 and 18” Diameter with a wide selection of available fittings, mounting, drains filters & inserts. The following pages show some
of the more popular sizes and configurations. The complete list of tanks sizes and configurations is very extensive. Please e-mail or call us di-
rectly for questions about the right tank for your system. Tanks can also be ordered with removable lids and with float ball / shut off options. Most
tanks include floor stands or mounting straps and extra large 1.5” flapper drains.
PVC VACUUM TANKS
TANK VOLUME IN GALLONS & LITERS
Tank Diameter Tank Height Volume in US Gallons Volume in Liters
15” 35” 27 101
15” 42” 32 121
15 59” 45 170
15 120” 92 347
18 120” 110 417
Proper sizing of tanks is an important consideration when designing a vacuum system. MGM does not install vacuum systems and therefore can-not make recommendations regarding the proper sizing or proper installation of Tanks . The Dairy System Manufacturer (OEM’s) and their certi-fied dealers are the best source for this information and are responsible for proper sizing and installation
Formulas used:
Tank Volume: R2 x Height = cu/inch
Gallon Conversion: Cu Inch x 0.004329 = US Gallons
Gallons to Liters:U.S. Gallons x 3.783 = Liters
31
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
31
MGM Company, Inc. WWW.MGMCOMPANY.COM
EXAMPLES OF VERTICAL PVC VACUUM TANKS
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
27/ 100 3” 5 396020 60-3
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
27/ 100 3” 5 396023 60-6
Capacity Gal /Liter
Inlet Size # of Inlets
MGM # HARCO #
36 /138 2 ea 3” & 3 ea 4” 5 396109 66-109
36 / 138 3” 5 396025 60-8
EXAMPLE OF CUSTOM TANK - QUOTED UPON REQUEST
HARCO MODEL 66-87
32
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
32
MGM Company, Inc. WWW.MGMCOMPANY.COM
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
27/ 100 3” 6 396024 60-7
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
45 / 172 3” 6 396023 60-6
45 / 172 4” 6 60-57
EXAMPLES OF HOZRIZONTAL PVC VACUUM TANKS
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
92 / 347 2 ea. 6” & 4-ea. 4”” 6 396674 66-74
92 / 347 4” 8 60-17
92 / 347 6” 6 60-71
33
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
33
MGM Company, Inc. WWW.MGMCOMPANY.COM
EXAMPLES OF REMOVEABLE LID PVC VACUUM TANKS
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
45 / 172 3” 6 396014 60-135
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
41 /156 3” 2 396013 60-13
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
27 / 101 3” 6 396016 60-133
Some countries and perhaps some regions of the US require , removable end caps on the PVC Vacuum Tanks. This feature allows for cleaning and inspection of the interior of the tanks . It also aids in removing any debris that may accumulate in the tanks. MGM offers a wide variety of tanks with removable lids. A few of the more popular examples are shown below.
34
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
34
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Description Model No.
396026 15” End cap w/1.5” outlet 61-9
394058 15” End cap Enlarged for Tanks with removable end cap. 931-73
394050 1.5” Drain Valve 931-66
394048 Gasket, for 15” Tanks with removable end caps. 931-15
396030 Tank Wall Bracket (Set of 2)
396051 15” End Cap w/ 3 x 3” inlets (For standard tanks) 61-3
396052 15” End Cap w/ 1 x 3” inlet (For standard tanks) 61-12
396032 15” End Cap Blank (no inlets) (For standard tanks) 931-72
276017 Replacement Float Ball for 3” Tank Outlet
276030 Replacement Float Ball for 4” Tank Outlet
369034 Leg Stand for Vertical Tanks 931-76
396027 6.0” X 23.75” PVC Tank for Portable Milkers.
EXAMPLES OF PVC VACUUM TANKS FLOAT BALL SHUT OFF
Model 60-243
Spare Parts for PVC Vacuum Tanks
Model 60-242
35
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
35
MGM Company, Inc. WWW.MGMCOMPANY.COM
PVC PRE-AIR FILTERS
Filtered air is recommended for all vacuum pumps. Pre-Air Filter gives extra protection for vacuum pumps. Designed to filter out moisture and air borne contaminated debris prior to entering the vacuum pump. The units are constructed of non-corrosive white PVC with washable stainless steel filters. The size of the units coupled with the high filtration area offered by the insert helps reduce line fluctuation and reduces build-up on lobes and helps extend vacuum pump and motor life. The improved removable lid makes it easy to inspected the filter screen on a regular interval. It should be cleaned or replaced as needed. Units come complete with floor stand, self draining flapper drain valve for single or dual vacuum pump systems. A PVC plug is included with dou-ble exit models to seal off the unneeded outlet. Custom configurations models are available.
394045 Gasket 12” U-Shaped 931-14
394050 Drain Valve w/flapper 1.5” NPT 931-66
394057 Lid PVC 12” 931-71
395001 Filter SS 18.375” x 23.25” 931-79
395005 Filter SS 11.5” x 18.5” (3 screen layers) comes in all cur-rent models
931-97
395007 Filter SS 11.0” x 18.375” x.375” 931-97A
395009 Filter W/ PVC Frame 11.5” x 18.5” w/304 SS screen. (can be trimmed to fit other filters)
931-99
395025 Baffle only 931-69
Part No. Model Size In x Out
396022 60-4 Double 3.0” in x 2 x 3.0” out
396000 60-50 Single 4.0” in x 4.0” out
396050 60-110 Double 4.0’ in x 2 x 4.0” out
Complete Pre-Air Vacuum Filters Pre-Air Filter Spare Parts
Standard 3” & 4” filters with single & dual vacuum pump connections.
Part No. Model Size In & Out
396051 60-17 Single 6.0” in x 6.0” out
Standard 6.0” Vertical vacuum pump filters.
Part No. Model Size In & Out (15” x 39”)
396055 66-121 6.0” in x 6.0” out
Commercial duty horizontal pre air filter with 6.0” connections in and out and with a 6.0” hinged back flow flapper valve.
395008 931-83 Filter SS 13.375” x 19.5” (2– required)
395001 Filter 13.375” x 23.25” (2 - required)
394055 931-701 Hinged Flapper 6.0”
Spare Parts for Commercial Pre air Filter
36
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
36
MGM Company, Inc. WWW.MGMCOMPANY.COM
VACUUM LINE GATE VALVES
WHITE PVC VALVES
BLACK ABS VALVES
Part # Size Description Paddle Ctn/Qty
368101 50mm Slip x Slip Plastic 26
368201 63mm Slip x Slip Plastic 16
368375 75mm Slip x Slip Plastic 15
368301 90mm Slip x Slip Plastic 12
368401 110mm Slip x Slip Stainless Steel 6
368402 110mm Slip x Slip w/ Pneumatic Cylinder Stainless Steel 6
368601 160mm Slip x Slip Stainless Steel 1
368801 200mm Slip x Slip Stainless Steel 1
368910 250mm Slip x Slip Stainless Steel 1
368912 315mm Slip x Slip Stainless Steel 1
Part # Size Description Paddle Ctn/Qty
367101 1.5’ Slip X Slip Plastic 36
367201 2.0” Slip X Slip Plastic 20
367301 3.0” Slip X Slip Plastic 18
Part # Size Description Paddle Ctn/Qty
366101 1.5” Slip X Slip Plastic 30
366201 2.0” Slip X Slip Plastic 20
366301 3.0” Slip X Slip Plastic 12
364301 3.0” Slip X Slip w/stainless steel paddle Stainless Steel 12
361119 3.0” Female w/Slip Flange Plastic 12
367311 3.0” Slip X Tank Flange Plastic 18
366401 4.0” Slip X Slip Stainless Steel 6
366402 4.0” Slip X Slip Gray valve. Stainless Steel 6
366601 6.0” Slip X Slip Stainless Steel 1
366801 8.0” Slip X Slip Stainless Steel 1
GRAY METRIC VALVES
SPARE PARTS
361107 2.0” Valve Seat
361102 3.0” Valve Seat
361118 4.0” Valve Seat
361122 6.0” & 8.0” Valve Seat
361109 Plastic Handle for 1.5” to 3.0” Vale
361110 Metal Handle for 4.0” to 8.0” Valve
361003 3.0” Valve Seat & Hardware (Bagged)
361115 3” Replacement Body
37
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
37
MGM Company, Inc. WWW.MGMCOMPANY.COM
PVC GATE VALVES FOR VACUUM LINES
FEATURES
APPLICATIONS INEXPENSIVE VALVES FOR INDUSTRIAL, AGRICULTURA AND COMMERCIAL MARKETS. THIS IS AN IDEAL VALE FORQUICK SHUT OFF IN LOW PRESSURE VACUUM LINES. ALSO WELL SUITED AS A DRAIN FOR TANKS.
1.5” White 1.50” Black 2.0” White 2.0” Black 3.0” White 3.0” Black 4.0” 6.0” & 8.0”
HUBS PVC ABS PVC ABS PVC ABS PVC PVC
BODY PVC ABS PVC ABS PVC ABS PVC PVC
SHAFT STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS
PADDLE POLYPRO POLYPRO POLYPRO POLYPRO POLYPRO POLYPRO STAINLESS STAINLESS
HANDLE PLASTIC PLASTIC PLASTIC PLASTIC PLASTIC PLASTIC ALUMINUM STAINLESS
SEALS SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE
PSI 45 45 40 40 30 30 20 10
MATERIALS AND SPECIFICATIONS
SIZE A B C D E F
1.5” PVC 6.50” 8.625” 2.875” 2.375” 3.9375” 3.375”
1.5”ABS 6.50” 8.625” 2.875” 2.375” 3.9375” 2.875”
2.0” PVDC 7.50” 10.25” 3.25” 2.75” 4.50” 3.125”
2.0” ABS 7.50” 10.25” 3.25” 2.75” 4.50” 3.50”
3.0” ABS/PVC 9.25” 13.0” 2.375” 3.9375” 5.1875” 4.50”
4.0” PVC 13.25” 18.0” 6.625” 5.0” 7.4375” 5.1875”
6.0” PVC 22.375” 31.125” 11.0” 7.25” 13.25” 11.125”
8.0” PVC 22.375” 31.125” 11.0” 9.3125” 12.1875” 13.75”
DIMENSIONS (SLIP X SLIP) VALVES
SOCKET DEPTH
1.5” 2.0” 3.0” 4.0” 6.0” 8.0” SIZE
.07” .75” 1.60” N/A N/A N/A ABS
1.25” 1.60” 1.80” 1.70” 4.375” 5.67” PVC
A NOTE ABOUT CEMENTS
FITTING PIPE CEMENT RECOMENDATION
ABS PVC USE IPS # 793 OR EQUIVALENT
ABS ABS USE IPS # 771 OR EQUIVALENT
PVC ABS USE IPS # 793 OR EQUIVALENT
PVC PVC USE IPS # 705 OR EQUIVALENT
38
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
38
MGM Company, Inc. WWW.MGMCOMPANY.COM
WHITE PVC VACUUM LINE PIPE
White PVC Pipe is the perfect material for vacuum lines. Clean appearance, low cost, ease of use and the wide variety of compatible white fittings make for a long lasting and good looking installation. MGM can be your single supply source for all components needed for a complete white PVC vacuum line.
Made of the same material as the Pre Air Filters , Vacuum Tanks and compatible gate valves
Size Lengths Per Pallet (10 ft. or 20 ft/6 m.)
Feet Per Pallet 10 ft. / 20ft/6 m
Meters Per Pallet 10ft. / 20 ft/6 m
Pallet Weight 10 ft. / 20 ft/6 m
1.5” 158 1580 / 3160 481.5 / 963 1580 lb. / 3160 lb.
2.0” 210 2100 / 4200 640 / 1280 1050 lb. / 2100 lb.
3.0” 92 920 / 1840 280.5 / 561 920 lb. / 1840lb.
4.0” 57 570 / 1140 174 / 348 570 lb. / 1140 lb.
6.0” 24 240 / 480 72 / 146 240 lb. / 480 lb.
PIPE SIZES AVAILABLE UP TO 18” DIAMETER
Size 20 ft/6 m Length # 10 ft Length # Per Meter # Per Foot #
1.5” 331018 331017 331016 331015
2.0” 331023 331022 331021 331020
3.0” 331033 331032 331031 331030
4.0” 331043 331042 331041 331040
6.0” 661063 331062 331061 331060
39
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
39
MGM Company, Inc. WWW.MGMCOMPANY.COM
White PVC Raised Plug W/Nut
White PVC Flush Bushing
Part # Size Box Qty
5106020 2.0” 50
5106030 3.0” 25
5106040 4.0” 30
5106060 6.0” 10
Part # Size Box Qty
5107212 1.5” x 1.25” 100
5107250 2.0” x 1.25” 50
5107251 2.0” x 1.5” 50
5107338 3.0” x 2.0” 30
5107420 4.0” x 2.0” 30
5107422 4.0” x 3.0” 30
5107532 6.0” x 4.0” 10
5107337 3.0” x 1.5” 30
White PVC Flush Bushing Part # Size Box Qty
5108251 2.0” x1.5” 50
White PVC Male Adapter
Part # Size Box Qty
5109015 1.5” 50
5109020 2.0” 50
5109030 3.0” 25
5109040 4.0” 25
Part # Size Box Qty
5112020 2.0” 25
5112030 3.0” 25
5112040 4.0” 10
5112060 6.0” 10
White PVC Clean Out Adapter With Plug
COMMON WHITE PVC VACUUM LINE FITTINGS
40
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
40
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part # Size Box Qty
5100015 1.5” 100
5100020 2.0” 100
5100030 3.0” 60
5100040 4.0” 25
5100060 6.0” 15
White PVC Coupling
Part # Size Box Qty
5102251 2.0” X 1.5” 25
5102337 3.0” X 1.5” 25
5102338 3.0” X 2.0” 20
5102422 4.0” X 3.0” 10
5102532 6.0” X 4.0” 4
Part # Size Box Qty
5103020 2.0” 25
Part # Size Box Qty
5101012 1.25” 50
5101015 1.5” 100
5101020 2.0” 100
5101030 3.0” 30
5101040 4.0” 10
5101060 6.0” 10
White PVC Female Adapter
White PVC Reducer
White PVC Male Adapter
Part # Size Box Qty
5105020 2.0” 50
5105030 3.0” 25
5105040 4.0” 10
5105060 6.0” 10
White PVC Cleanout Adapter
COMMON WHITE PVC VACUUM LINE FITTINGS
41
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
41
MGM Company, Inc. WWW.MGMCOMPANY.COM
White PVC 90° Bend
Part # Size Box Qty
5300015 1.5” 100
5300020 2.0” 50
5300030 3.0” 25
5300040 4.0” 10
5300060 6.0” 5
White PVC 90° Long Sweep Bend
Part # Size Box Qty
5304020 2.0” 25
5304030 3.0” 10
5304040 4.0” 5
Part # Size Box Qty
5321015 1.5’ 100
5321020 2.0” 50
5321030 3.0” 20
5321040 4.0” 10
5321060 6.0” 3
White PVC 45° Bend
White PVC Double 90° Bend
Part # Size Box Qty
5327020 2.0” 25
5327030 3.0” 10
Part # Size Box Qty
5400015 1.5” 100
5400020 2.0” 35
5400030 3.0” 30
5400040 4.0” 5
5400060 6.0” 6
White PVC Sanitary Tee
COMMON WHITE PVC VACUUM LINE FITTINGS
42
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
42
MGM Company, Inc. WWW.MGMCOMPANY.COM
White PVC Vent Tee
Part # Size Box Qty
5441020 2.0” 25
5441030 3.0” 10
5441040 4.0” 5
5441060 6.0” 4
White PVC WYE
Part # Size Box Qty
5600015 1.5” 50
5600020 2.0” 25
5600030 3.0” 25
5600040 4.0” 5
White PVC Sch 40 tee
Part # Size Box Qty
4401005 .05” 50
4401020 2.0” 25
4401030 3.0” 10
4401040 4.0” 5
4401060 6.0” 4
White Sched 40 Reduce Tee Slip x Slip x FPT
Part # Size Box Qty
4402247 2.0” x 2.0” x .05” 10
4402249 2.0” x 2.0” x 1.0” 10
4402335 3.0” x 3.0” x 1.0” 10
White PVC Metric Adapter
Part # Size Box Qty
4403750 3.0” x 75 mm 10
4403900 3.0” x 90 mm 10
4404110 4.0” x 110 mm 10
COMMON WHITE PVC VACUUM LINE FITTINGS
43
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
43
MGM Company, Inc. WWW.MGMCOMPANY.COM
Sched 40 white PVC Reducing 90° Bend
Part # Size Box Qty
4406005 .05” 50
4406015 1.5” 25
Sched 40 White PVC 45 ° Bend Part # Size Box Qty
4417005 .05” 50
Sched 40 White PVC Coupling
Part # Size Box Qty
4429005 .05” 50
4429015 1.5” 25
Sched 40 White PVC Male Adapter
Part # Size Box Qty
4436020 2.0” 25
4436030 3.0” 10
4436040 4.0” 5
Sched 40 White PVC Reducer Bushing
Part # Size Box Qty
4437130 1.0” x .50” 100
4437250 2.0” x 1.25” 25
4437338 3.0” x 2.0” 10
4437422 4.0” x 3.0” 5
Sched 40 White PVC Reducer Bushing
Part # Size Box Qty
4438131 1.0” x .75” 100
4438247 2.0” x .50” 10
4438249 2.0” x 1.0” 10
4438250 2.0” X 1.25” 10
4438251 2.0” X 1.5” 10
COMMON WHITE PVC VACUUM LINE FITTINGS
44
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
44
MGM Company, Inc. WWW.MGMCOMPANY.COM
Sched 40 White PVC Threaded Bushing
Part # Size Box Qty
4439073 .50” X .375” 50
Sched 40 White PVC Cap
Part # Size Box Qty
4447015 1.5” 25
4447020 2.0” 25
4447030 3.0” 10
4447040 4.0” 5
4447060 6.0” 5
Sched 40 White PVC Plug
Part # Size Box Qty
4449015 1.5” 25
4449020 2.0” 10
4449030 3.0” 10
4449040 4.0” 5
COMMON WHITE PVC VACUUM LINE FITTINGS
PVC check valve Backflow swing check valve.
Long Lasting. Heavy duty flapper with neoprene
O-ring seal. Horizontal installation.
Line Size Valve Complete Flapper w/O-ring Lid w/O-ring
1.5” 223281 223287 223291
2.0” 223282 223287 223291
3.0” 223283 223288 223292
4.0” 223284 223289 223293
6.0” 223286 223290 223294
Inline swing style PVC check valve will help keep vacuum pumps from running backward and helps prevent equipment damage, at shut off time. Designed to be mounted horizontal in the vacuum line on the intake side of the vacuum pump. Heavy duty flapper with neoprene O-ring seal.
45
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
45
MGM Company, Inc. WWW.MGMCOMPANY.COM
301200 Fresh Air Filter Complete Assembly 301503 Replacement filter for fresh air and bottom air filter for models 350 & 500 Sentinel vacuum
Keeps pulsators clean and working properly. Attaches to 3.0” PVC. Keeps dust and insects out of vacuum line. One filter kit recommended per 10 pulsators.
Fresh Air Vacuum Line Filter Kits
361055 Anti-reversing valve
Keeps the vacuum system safe. Keeps the pump from turning back-wards when system is shut down. Keeps foreign material from enter-ing the vacuum exhaust pipe. For 1.5 and 2.0” diameter exhaust pipes.
Anti-Reversing Check Valve
VACUUM COMPONENTS
Drip Drain Black Plastic (Vacuum Drain Valve)
363000 Drip Drain black plastic w/.50 threads.
Drip Drain Brass (Vacuum Drain Valve)
363005 Drip Drain brass w/.50 threads
Delaval Lid to Interpuls Adaptor
241100 Bucket Lid Adaptor for Hyrdopuls 100 241114 Bottom gasket for Hydropuls adaptor 241113 Check Valve for Hydropuls adaptor. 241130 Adjusting hand wheel for Delaval lid
241128 Adaptor for Delaval lid. 241114 Bottom gasket for adaptor 241120 Check Valve
241129 Interpuls to DV 300 adaptor
Delaval Hydropuls Lid Adaptor
Universal to Interpuls Adapter
361137 Interpuls to Universal adapter.
Delaval DV300 to Interpuls Adaptor
. 363006 Drip Drain black plastic w/.375” threads
46
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
46
MGM Company, Inc. WWW.MGMCOMPANY.COM
PULSATORS & STALL COCKS
24 volt BouMatic style Pulsator has improved power consumption and exhaust ports with good quality electrical contacts.
305000 Stanchion Mount Pulsator 24 305001 Parlor Mount Pulsator 24V
Electric Pulsator Spare Parts
Part No. Ref. Description
305020 1 Nipple O-Ring
305022 2 Coil Base O-Ring 1.625”
305023 3 Piston Base Cap
305024 4 Top Insert for Piston
305025 5 Nipple Protector
305031 20 Nipple/Suction tube Stainless Steel
305026 6 Clean-Out Plug for Side
305027 9 Piston only
305028 11 White Base Assy. Stanchion
305029 10 Base Assy. Parlor Mount
305030 12 Contact Spring
305033 21 Coil only Red 24 volt
305055 Pulsator Repair kit
Strap-on Stall Cock Good quality, made of die-cast metal. Fits any size of PVC or stainless steel tubing. Fits, Strangko, BouMatic and Schlueter and Westfalia pulsators. 305040 Strap-on Stall cock complete. 305041 Strap-on Stall cock complete. w/64 -114mm clamp. 305046 Stall cock repair kit. 305043 Clamp only for 64 to 114mm pipe.
Thread-on Stall Cock Good quality, made of die-cast metal. Fits any size of PVC or stainless steel tubing. Fits, Strangko, BouMatic and Schlueter and Westfalia pulsators. 305042 Thread-on Stall cock complete 305046 Stall cock repair kit.
Manual Stall Cock Plated metal with tapered hose connection with manual on/ off lever and NPT threads. 305048 Angled 90D Stall cock w/ .375” threaded connection 305045 Straight Stall cock w/.375threaded connection 363002 Angled 90D Stall cock w/ .50” threaded connection 363004 Straight Stall cock w/.50”threaded connection
Strap-on Stall Cock
Thread-on Stall Cock
Manual Operated Stall Cock
241180 Pulsator repair kit for older Surge Belly Milker Pail System. Kit contains: 2 cylinder gaskets, 4 flanged expanders, 4 piston leathers, 1 O-ring, and 1 rubber tip. 303053 Pulsator repair kit for Surge Alternating Pulsator. Contains: 2 coil base O-rings & 2 pistons w/rubber cap and base.
Repair Kit for Surge Vacuum & Electric Pulsator
305055 Repair kit includes: 2 pistons w/caps, 2 coil O-rings & 1 nipple gasket.
Repair Kiit contains: Ball, O-ring, 2-sleeves & contacts, 6 washers, 3 #6 screws, 2 flat nylon washers.
47
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
47
MGM Company, Inc. WWW.MGMCOMPANY.COM
WASH SINKS
Single Compartment, Regular Wash Sink 12 .25” Deep , 20.5” Wide
Deep Wash Sink, Single 15.25” Deep , 22.0” wide
Part No. Model No. Gallons Length (inches)
420018 518 14 20
420022 522 18 24
420029 529 23 31
420036 536 29 38
420049 549 39 51.25
420060 560 48 60
420072 572 58 72
Part No. Model No. Gallons Length (inches)
421818 51818 14/14 40 (18/18)
422222 52222 18/18 47 (22/22)
422229 52229 18/23 54 (22/29)
422929 52929 23/23 61 (29/29)
422236 52236 18/29 61 (22/36)
422249 52249 18/39 74 (22/49)
420615* 736015 15/60 81 (18/61.5)
Part No. Model No. Gallons Length (inches)
420115 7315 15 18.5
420130 7330 30 33.5
420140 7340 40 43.5
420150 7350 50 53.5
420160 7360 60 63.5
420180 7380 80 75.5
Double Compartment Regular Wash Sink 12 .25” Deep , 20.5” Wide
Vertical Wash Tank Features: -Dished Bottom -Made of Heavy Gauge Polished 304 Stainless -Comes with 2” x 14” Adjustable round legs -Removable 2-piece top lid -2” Drain Outlet Options: Ferrule on Drain Outlet Flanged Holes available in Lid Custom sizes available
Part No. Size (Gal.)
Height ( overall)
Diameter Tank Height
423085 85 54” 26” 36”
423120 120 54” 30” 36”
423150 150 66” 30” 48”
423195 195 78” 30” 60”
423280 280 82” 36” 60”
Part # Description
422001 Hand Wash Basin Only
422002 Hand Wash Basin Complete w/ Mixing Faucet
422009 Mixing Faucet Only
(*Part number 426015 is a special Deep 15.25” Double Wash Sink.)
48
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
48
MGM Company, Inc. WWW.MGMCOMPANY.COM
AISI 304 SS shield,9/16” wide bands and one piece screw housings are mechanically interlocked for strength. Neoprene Gasket conforms to ASTM C 564. Use for Depend-O-Drain installation's.
422105 1.5” No Hub Coupling.
Part No. Description
422012 Painted Legs Set ( Regular Sink)
422015 Painted Legs ( Deep Sick)
422005 Painted Bracket Set (Regular Sinks)
422008 Painted Brackets (Deep Sinks)
Part No. Description
422000 Tank Drain Complete w/stopper
422021 Tank Drain Compete w/o stopper
422020 Rubber Stopper
422003 Drain Gasket
422025 Plastic Lock Nut
422022 Zinc Lock Nut
422004 3mm Rubber Gasket
WASH SINKS PARTS & ACCESSORIES
No Hub Coupling
Spray Ball
Flexible couplings allows for a quick and easy to cast iron or plastic to cast iron or plas-tic. Also used as a strain relief and union for air or liquids. Includes 300 series stainless steel clamp. 422150 1.5” Coupling 422151 2.0” Coupling 422152 3.0” Coupling 422153 4.0” Coupling
Reducing Flexible Coupling Flexible reducing coupling allows for a quick and convenient way to connect two differ-ent sizes of pipe. PVC to steel PVC to PVC. Makes and ideal way to connect a 2.5” vacuum pump inlet to 3.0” PVC vacuum line. Also handy has a vibration protection from pump to line coupling. 300 series stainless steel clamps included. 422154 2.5” x 3.0” Reducing Coupling 422155 3.0” x 4.0” Reducing Coupling
Flexible Coupling
Stationary spray balls are designed to be mounted on a tube or pipe. Made of 316 stainless steel with 2mm spray holes. Recommended 360 degree spray pattern is used in vertical wash and milk tanks.
MGM # Size A B C Pin Size D E
423290 1.5” 3.54” 2.95” 1.505” .226” .975” .445”
49
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
49
MGM Company, Inc. WWW.MGMCOMPANY.COM
CIP Wash Equipment
Distributor Tee’s 241242 Distributor SS w/out tee 241244 Distributor SS with out of line tee. 241246 Distributor SS with in line tee. 241249 Smooth plastic tee 421002 Distributor w/o tee black plastic 276071 Duck bill drain
Duck Bill Drain Rubber
276071 Duck Bill Drain Each
276073 Box of 100
Nipple closures are available in black and brown rubber. Fits 9/16” and 5/8” ID milk line inlets. 241258 Rubber Nipple Closure (Black)
Nipple/Inlet Closures
Silicone Diaphragm
Replacement silicone diaphragm for 48000 vacuum operated plastic valve also for Westfalia Metatron and BM sensors. 241200 Diaphragm each
Inflation/Liner Plug ISO-Model
Plastic ISO artificial teat plugs are used on every farm. Plugs are also required to do pulsa-tor and vacuum system performance testing. Plastic plugs are available in black or orange and can be packed or bagged to fit your distribution needs. Call for information . 242120 Orange Inflation/Liner Plug ISO-Model 242121 Black Inflation/Liner Plug ISO-Model
Plastic double hose clip are de-signed to hold twin pulsation hose to milk hose. Wide 3/4” design keeps clip for causing any hose restrictions.
245128 Black Double Hose Clip 245230 Blue Double Hose Clip
Hose reinforcing spring. Made of stainless steel. Used to reinforce the milk hose connections to keep hoses from kinking. For use on milk house up to 1.125 (28 mm) OD. 5.5” long x 1.125 ID.
245120 Hose Support Spring. 5.5” long x 1.125” ID.
Tube/Hose Clip. Clip holds twin vacuum tubing together with 5/8” milk hose. 245125 Black Plastic Clip
50
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
50
MGM Company, Inc. WWW.MGMCOMPANY.COM
BENDER MODEL 2800 AIR INJECTOR
MGM # Item # Bender # Description
412832 1 2832 Fuse holder
412831 2 2831 Fuse 2 AMP.
412806 4 2806 Timer-Adj. On/Off 1 to 30 Sec.
412865 9 2865 Sponge Rubber Cushion
415519 10 5519 Solenoid 120Vac
415530 10 5530 Solenoid 240Vac
412891 22 2819 Stopper Rod Assembly
412812 14 2812 Stopper Rod Busing
412846 12 2846 External Spring
415998 9 5998 Rubber Cushing
MGM # Bender Model Description
412820 2800-240V-60 Bender Air Injector 240VAC W/1.5” Ferrule
412802 2800-x Bender Air Injector 240 VAC less Solenoid
412800 2800 Bender Air Injector 120VAC W/1.5” Ferrule
412803 2800-240-50 Bender Air Injector 240VAC 50HZ w/1.5” Ferrule
412804 2800-200 Bender Air Injector 200VAC W/1.5” Ferrule
Complete Control Modules
Spare Parts
Features:
1. Designed for larger diameter pipelines.
2. Sponge rubber shock absorbing air valve.
3. Powered by new solenoid w/adjustable on/
off timer w/slide valve.
4. Can be mounted on the wall or pipeline.
51
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
51
MGM Company, Inc. WWW.MGMCOMPANY.COM
BENDER MODEL 8950 TIMER CONTROL MODULE
MGM # Item # Bender # Description
412832 2 2832 Fuse holder
412831 7 2831 Fuse 2 AMP.
415513 9 5513 Pressure Switch
418926 14 8926 Fail Timer 100 Minute , 120 VAC
418927 14 8927 Fail Timer 100 Minute , 240 VAC
419750 17 9750 Timer 120 VAC
418752 17 9750-240 Timer 240 VAC
419257 18 9257 24 Hour Clock 120VAC
418238 18 8238 24 Hour Clock 240VAC-60HZ
419240 18 9240 24 Hour Clock 240VAC-50HZ
416265 3 6265 Toggle Switch
MGM # Bender Model Description
418950 8950 Bender Timer Control Module 12VAC
418951 8950-240-60 Bender Timer Control Module 240VAC-60HZ
418952 8950-240– 50. Bender Timer Control Module 240V-50HZ
Key Features: 1. Standard 8 Minute Wash Cycle 2. Electro—Mechanical Timer 3. Failsafe indication 4. 24—Hour Clock for Automatic Pre-sanitize. 5. Door Interlock 6. Combine with 3 Peristaltic pump model 9590 or 9740 jar Dispensers. 7. Door interlock. 8. CSA approved.
Complete Control Modules Less Drain Valve
Spare Parts.
52
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
52
MGM Company, Inc. WWW.MGMCOMPANY.COM
BENDER MODEL 7540 DIVERTER
MGM # Bender Model Description
417540 7540 Bender Diverter Valve 120V
417542 7540-240V Bender Diverter Valve 240V
417543 7540-X Bender Diverter Valve lest Solenoid.
MGM # Item # Bender # Description
416071 17 607-C Bellows
416018 21 60183 Stopper Rod Assembly
412578 22 2578 Bushing
412584 23 2584 External Retaining Ring (3 req.)
412582 25 2582 Spacer Washer
412583 25 2583 Internal Retaining Ring
416022 29 60227 Stopper Plug
Spare Parts.
Complete Diverter Valves
MGM # Item # Bender # Description
412563 8 2563 Gasket (2 required)
412563 8 2563 Gasket (2 required)
412659 9 2659 Lower Housing
415519 13 5519 Solenoid 120VAC/50-60HZ
415530 13 5530 Solenoid 240VAC/60HZ
415532 13 5532 Solenoid 240VAC/50HZ
412560 14 2560 Upper Housing
Specifications:
1. Model 7540, 120VAC / 50-60
HZ., .740 AMPS.
2. Duty Cycle: On Max. 17.5
Minutes. Off Min. 4.5
Minutes. For 2 Cycles.
1. Model 7540-240, 240VAC /
50-60HZ., 740 AMPS.
2. Duty Cycle: On Max. 17.5
Minutes. Off Min. 4.5
Minutes. For 2 Cycles.
53
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
53
MGM Company, Inc. WWW.MGMCOMPANY.COM
BENDER MODEL 9590 PERISTALTIC PUMP DISPENSER MODULES
MGM # Item Bender # Description
1 8908 Adjustable Timer , 120VAC,1 - 1023 Second
418908 1 8909 Adjustable Timer , 240VAC,1 -1023 Second
419565 5 9565 Roller Assembly
419576 8 9576 Hi Speed Motor 120VAC, 120RPM
419561 8 9561 Hi Speed Motor 240VAC, 50HZ120 RPM
419597 9 9577 Squeeze Tube Assembly 3/8 ID x 5/8” OD
419257 11 8885 Water Valve With Bracket
412551 11A 32551 Water Valve Coil. 120VAC
412550 11A 32550 Water Valve Coil. 240VAC
MGM No. Bender Model Description
419590 9590 Bender Peristaltic Pump Dispenser 120V, W/water Valves
419592 9590-240V Bender Peristaltic Pump Dispenser 240V, W/water valves
Complete Pump Units less Drain Valve.
Spare Parts.
Features:
1. 3 - 20 oz. (590 ml)per minute mo-
tor Driven Peristaltic Pumps.
2. Switch Programmable timing to set
pump output. (From 1 to 1023 sec-
onds)
3. Hot & Cold Water Valves Included
on Model # 9590. (20 GPM)
4. Detergent, Acid and Sanitize Ca-
pacity of 300 OZ. (9,000 Ml)
5. Input Plate for Wash Vat Included.
6. Inlet hose w/ weight & screen.
7. Used with 8950 Control Module
8. CSA Approved.
MGM # Item Bender # Description
418876 13 8876 Outlet Adaptor
418814 17 8814 Inlet Adaptor, 3/4”
418869 18 8869 Pressure Hose 1/2” ID x 6 Ft.
411403 20 1403 Hose Screen Gaskets
412678 29 2678 Bottle Cap for Large Container
412528 30 2528 Weight Ceramic
412530 31 2530 Screen
419585 33 9585 Squeeze Tube Replacement Kit
410788 788 Check Valve Assembly for 3/8” Tub
54
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
54
MGM Company, Inc. WWW.MGMCOMPANY.COM
Heavy Duty Split Guard Safety Hobble
NEW 2” wide cow hobble designed for more strength with slightly longer spread for larger cows to walk freely. Same single unit design features twin locking nickel plated hardware and easy off adjustable Velcro brand hook and loop securing leg straps. Very strong but soft. 259103 1 pk, 2.0” wide x 21” long
Split Guard Safety Hobble
Strong, lightweight cow hobble provides ideal protection against slipping and splitting out in all conditions especially after calving.. Unique one piece design features easy on and off adjustable VELCRO brand hook and loop securing leg straps. A spread of 21 “ allows cows to walk freely while wearing Split Guard. 259102 1 pk, 1.5” wide x 21” long.
Leg Bands
Ideal for marking cows with color identifica-tion system. Made of tough nylon VELCRO brand hook and loop material. Leg bands are washable and reusable and can be numbered with permanent marker. All colors of Velcro leg bands are packed 10 per clear plastic bag with a blank header card.
259091 RED
259092 YELLOW
259093 ORANGE
259094 BLUE
259095 GREEN
259096 NEON GREEN
259097 NEON YELLOW
259098 NEON PINK
259099 NEON ORANGE
LIVE STOCK CARE
Teat Dip Sprayer Hand operated Trigger sprayer, sprays upward so that a solid spray covers the teats with teat dip. The blue nozzle with stainless insert is resistant to teat dip chemicals. Also availa-ble with a 4”extended nozzle.
255200 Complete sprayer w/standard nozzle & 24 oz. bottle.
255207 Complete sprayer w/extended nozzle.
255202 Trigger & tube
255204 Bottle only 24 oz.
255205 Bottle only 16 oz.
255201 Blue Standard Nozzle only
292004 Blue 4” Extended Nozzle only
55
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
55
MGM Company, Inc. WWW.MGMCOMPANY.COM
STAINLESS DISPENSER - HOSE CHUTES - MILKHOUSE DESK -TOWELS
All stainless steel construction
Brushed Polish Finish
Easy Front Load & mounts on wall
Accommodates folded and Round paper towels 424012 SS towel Dispenser
Made of heavy gauge Polished Stainless Steel
Unique Latch Keeps door Closed Tightly to Keep Insects out.
Stainless Steel Piano Hinge
Rough Openings are 6” x 6” 424509 Telescopic hose chute stainless, 5” to 9” 424513 Telescopic hose chute stainless, 9” to 13”
Barn Desk Stainless Steel wall Mount Room for records, chart boxes, note pads, etc. Lid folds down for a stable writing surface. Latch Keeps desk closed tight when not in use. 424010 Barn Desk
Milk Filter Dispensers
Hinged Doors for Easy Loading
Magnetic latch keeps door closed
Stainless Steel Hinge
Made of 22 Gauge polished Stainless.
Two popular sizes available 424024 3” X24” Holds milk Filter socks or tubes up to 3 in. wide. 424036 4/7/8 x 36” Holds all 33” & 36” long milk Filter Socks & Tubes.
Hose Chutes Telescoping Stainless Steel
Paper Towel Dispenser
Barn Desk Milk Filter Dispenser
Hose Chute Telescoping Galvanized
Galvanized hose chute features 24-guage construction, inside u-shaped door with rolled edge. Self closing outer door. Extends from 5” to 9” and rough opening is 6” x 6”. 192010 Galvanized hose chute
Microfiber Premium Dairy Towels.
Practical size 12” x 12” light blue or yellow microfiber towels. Use them wet or dry and they will absorb 7 to 8 times their own weight in water. Microfiber works by attracting dirt and other contaminants like a magnet and trapping them within very fine microscopic filaments. The fibers are so tiny they are able to remove 99% of bacteria. Due to their superior quality, these microfiber towels can be washed and reused hundreds of times. Machine wash, tumble dry low heat, and do not iron. Do not use fabric softener or chlo-rine bleach. Microfiber towels are packed 50 towels per clear plastic bag with 5 packs per case. Each pack of 50 contains washing instructions. Minimum order is 1 case. Pallet contains 36 cases. 259302 Yellow 28 gram Microfiber towels, case of 250. (5 packs of 50 towels) 259303 Blue 34 gram Microfiber towels case of 250. (5 packs of 50 towels)
56
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
56
MGM Company, Inc. WWW.MGMCOMPANY.COM
ALPHABETICAL INDEX
Description Page Description Page Description Page
Adaptors, Stainless Steel 11 Gaskets, Pipe Line 18 Pulsator 46
Air Blow Valve 14,15 Gate Valve 36,37 Pulsator Adaptors 45
Air Forks 21 Goosenecks 20 PVC Fittings 39 - 44
Anti-Reversing Check Valve 44,45 Hand Wash Sink 47 PVC Pipe 38
Balance Tanks 30 - 34 Header Tanks 30 - 34 PVC Tanks 30 - 34
Ball Check Valve 14 Hex Nuts 13 Receivers 22,23
Balls, Plastic Float 24 Hobbles, Cow 54 Reducers, Stainless Steel 12,13
Bender Washing Equipment 50 - 53 Ho-Hub Coupling 48 Rubber Couplings 48
Butterfly Valve 16 Hose Chute 55 Shells, Milking 21
Check Valves, Stainless 14 Hose Clamp 4 Shut-Offs 21
Clamps, Stainless 4 Hose Clips 49 Silicone Diaphragm 49
Claw Gasket & Window 21 Hose Spring 49 Sprayers 54
Covers, Receivers 25 In Line Ball Check Valve 14 Spring, Hose Reinforcing 49
Dairy Towels 55 Inflation Plugs 49 Stainless Steel Fittings 4 - 14
Delrin Valve 21 Interpuls Adaptors 45 Stall Cocks 46
Diaphragm Silicone 49 Leg Bands 54 Tanks Drains 48
Dispensers 55 Liner Plugs 49 Teat Dip Sprayers 54
Distribution Tank 30 - 34 Liquid Level Control 26 Tee, Stainless Steel 10
Distributor Tees 49 Micro-Fiber Towels 55 Traps 24
Drip Drain 45 Milk Filters/Strainers 28 U-Bend 9
Duck Bill Drain 49 Milk Inlets, Stainless Steel 20 Vacuum Air Filter 35
Elbows, Stainless Steel 8,9 Milk Pump 25 Vacuum Check Valve 44
End Caps 7 Milk Pump Control 26 Vacuum Drain Valve 25
Ferrules, Stainless 5,6 Milk Valves, Inlets 20 Vacuum Gate Valve 36,37
Final Air Filter 35 Milking Shells 21 Vacuum Line Drain 45
Flange, Stainless 13 Moisture Traps 24 Wall Flange 13
Flapper Valves 18 Pinch Clamp 21 Wash Sinks 47
Float Ball 24 Pipeline Clamp 4 Wash Sinks Mounting Legs 48
Fresh Air Filter 45 Pipeline Hanger 19 Wrench, Hex Nut 13
Fresh Cow Lid 21 Pre-Air Filter 35 Y-Ball Check Valve 14,15
Y-Lateral 10
57
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
57
MGM Company, Inc. WWW.MGMCOMPANY.COM
PART NUMBBER TO PAGE NUMBER INDEX
153062 -- 16 154063 -- 11 155867 -- 9 181520 -- 18 195306 -- 19
153063 -- 16 154064 -- 11 155868 -- 9 181525 -- 18 213052 -- 20
153064 -- 16 154070 -- 8 158150 -- 14 181530 -- 18 213100 -- 20
153071 -- 16 154071 -- 8 158195 -- 14 181540 -- 18 213102 -- 20
153072 -- 16 154072 -- 8 158200 -- 14 182410 -- 18 213107 -- 20
153073 -- 16 154073 -- 8 158203 -- 14 182415 -- 18 213108 -- 20
153075 -- 16 154074 -- 8 158205 -- 14 182420 -- 18 213109 -- 20
153077 -- 16 154077 -- 12 159754 -- 15 182425 -- 18 213110 -- 20
153079 -- 16 154078 -- 12 159755 -- 15 182430 -- 18 213111 -- 20
153090 -- 16 154079 -- 13 181010 -- 18 182440 -- 18 213112 -- 20
153091 -- 16 154080 -- 13 181015 -- 18 192001 -- 7 213113 -- 20
154000 -- 6 154081 -- 7 181020 -- 18 192002 -- 7 213114 -- 20
154001 -- 6 154082 -- 7 181110 -- 18 192003 -- 7 213115 -- 20
154002 -- 6 154083 -- 7 181115 -- 18 192008 -- 13 213116 -- 20
154003 -- 6 154084 -- 7 181120 -- 18 192010 -- 55 213118 -- 20
154004 -- 6 154085 -- 7 181125 -- 18 192011 -- 13 213120 -- 20
154005 -- 6 154086 -- 7 181130 -- 18 192013 -- 13 213125 -- 20
154010 -- 6 154090 -- 13 181140 -- 18 195100 -- 19 213130 -- 20
154011 -- 6 154091 -- 13 181210 -- 18 195101 -- 19 213140 -- 20
154012 -- 6 154092 -- 13 181211 -- 18 195103 -- 19 213150 -- 20
154013 -- 6 154093 -- 13 181215 -- 18 195104 -- 19 215180 -- 20
154014 -- 6 154094 -- 13 181216 -- 18 195105 -- 19 215190 -- 20
154015 -- 6 154095 -- 13 181220 -- 18 195107 -- 19 215200 -- 20
154020 -- 6 154096 -- 13 181221 -- 18 195108 -- 19 215210 -- 20
154021 -- 6 154097 -- 13 181225 -- 18 195110 -- 19 215220 -- 20
154022 -- 6 154098 -- 13 181226 -- 18 195200 -- 19 215230 -- 20
154023 -- 6 154099 -- 13 181230 -- 18 195201 -- 19 215232 -- 20
154024 -- 6 154100 -- 13 181231 -- 18 195202 -- 19 223281 -- 44
154025 -- 6 154105 -- 13 181240 -- 18 195203 -- 19 223282 -- 44
154030 -- 6 154106 -- 13 181241 -- 18 195204 -- 19 223283 -- 44
154031 -- 6 154107 -- 13 181310 -- 18 195205 -- 19 223284 -- 44
154032 -- 6 154108 -- 13 181315 -- 18 195206 -- 19 223286 -- 44
154033 -- 6 154109 -- 13 181320 -- 18 195207 -- 19 223287 -- 44
154034 -- 6 154110 -- 13 181325 -- 18 195208 -- 19 223288 -- 44
154035 -- 6 155115 -- 14 181330 -- 18 195209 -- 19 223289 -- 44
154040 -- 6 155116 -- 14 181340 -- 18 195210 -- 19 223290 -- 44
154041 -- 6 155203 -- 14 181341 -- 18 195211 -- 19 223291 -- 44
154042 -- 6 155204 -- 14 181342 -- 18 195220 -- 19 223292 -- 44
154043 -- 6 155205 -- 14 181410 -- 18 195221 -- 19 223293 -- 44
154044 -- 6 155210 -- 15 181415 -- 18 195222 -- 19 223294 -- 44
154045 -- 6 155211 -- 15 181420 -- 18 195223 -- 19 241100 -- 45
154050 -- 5 155212 -- 15 181425 -- 18 195224 -- 19 241113 -- 45
154051 -- 5 155213 -- 15 181430 -- 18 195225 -- 19 241114 -- 45
154052 -- 5 155215 -- 15 181440 -- 18 195226 -- 19 241115 -- 45
154053 -- 5 155220 -- 15 181450 -- 18 195300 -- 19 241117 -- 21
154054 -- 5 155221 -- 15 181451 -- 18 195301 -- 19 241118 -- 21
154055 -- 5 155222 -- 15 181452 -- 18 195302 -- 19 241128 -- 45
154060 -- 11 155223 -- 15 181453 -- 18 195303 -- 19 241129 -- 45
154061 -- 11 155230 -- 15 181454 -- 18 195304 -- 19 241130 -- 45
154062 -- 11 155866 -- 9 181515 -- 18 195305 -- 19 241180 -- 46
58
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
58
MGM Company, Inc. WWW.MGMCOMPANY.COM
PART NUMBBER TO PAGE NUMBER INDEX
109222 -- 25 152130 -- 4 152487 -- 12 152755 -- 8 152903 -- 12
121500 -- 28 152140 -- 4 152488 -- 12 152757 -- 8 152904 -- 12
121501 -- 28 152142 -- 16 152489 -- 12 152759 -- 8 152905 -- 12
121502 -- 28 152143 -- 16 152490 -- 12 152761 -- 8 152906 -- 12
121503 -- 28 152160 -- 4 152500 -- 10 152763 -- 8 152907 -- 12
121506 -- 28 152161 -- 4 152501 -- 10 152830 -- 12 152915 -- 4
121507 -- 28 152210 -- 5 152502 -- 10 152832 -- 12 152920 -- 4
121508 -- 28 152215 -- 5 152503 -- 10 152833 -- 12 152925 -- 4
121509 -- 28 152220 -- 5 152504 -- 10 152834 -- 12 152930 -- 4
121510 -- 25 152225 -- 5 152510 -- 11 152835 -- 12 152940 -- 4
121512 -- 28 152230 -- 5 152511 -- 11 152836 -- 12 152955 -- 4
121514 -- 28 152240 -- 5 152512 -- 11 152840 -- 9 152960 -- 10
121517 -- 28 152310 -- 5 152615 -- 7 152841 -- 9 152961 -- 10
121518 -- 28 152315 -- 5 152620 -- 7 152842 -- 9 152962 -- 10
121520 -- 28 152320 -- 5 152621 -- 7 152843 -- 9 152963 -- 10
121522 -- 28 152325 -- 5 152622 -- 7 152844 -- 9 152964 -- 10
121530 -- 28 152330 -- 5 152623 -- 7 152845 -- 9 152965 -- 10
121531 -- 28 152340 -- 5 152625 -- 7 152850 -- 9 152967 -- 10
121532 -- 28 152410 -- 5 152630 -- 7 152851 -- 9 152969 -- 10
121533 -- 28 152413 -- 16 152640 -- 7 152852 -- 9 152970 -- 10
121534 -- 28 152415 -- 5 152651 -- 7 152853 -- 9 152971 -- 10
121535 -- 28 152420 -- 5 152652 -- 7 152854 -- 9 152972 -- 10
121536 -- 28 152425 -- 5 152653 -- 7 152855 -- 9 152990 -- 12
121537 -- 28 152430 -- 5 152654 -- 7 152860 -- 9 152991 -- 12
121538 -- 28 152440 -- 5 152655 -- 7 152861 -- 9 152992 -- 12
150000 -- 4 152450 -- 5 152659 -- 7 152862 -- 9 152993 -- 12
150003 -- 4 152451 -- 5 152661 -- 7 152863 -- 9 152994 -- 12
150007 -- 4 152452 -- 5 152662 -- 7 152864 -- 9 152995 -- 12
150008 -- 4 152453 -- 5 152663 -- 7 152865 -- 9 152996 -- 12
150009 -- 4 152454 -- 5 152700 -- 11 152870 -- 9 153010 -- 16
150012 -- 4 152459 -- 11 152701 -- 11 152871 -- 9 153015 -- 16
150013 -- 4 152460 -- 11 152702 -- 11 152872 -- 9 153020 -- 16
150014 -- 4 152461 -- 11 152705 -- 11 152873 -- 9 153025 -- 16
150015 -- 4 152462 -- 11 152706 -- 11 152874 -- 9 153030 -- 16
150019 -- 4 152463 -- 11 152707 -- 11 152875 -- 9 153040 -- 16
150022 -- 4 152464 -- 11 152709 -- 8 152880 -- 10 153045 -- 16
150025 -- 4 152465 -- 11 152710 -- 4 152881 -- 10 153047 -- 16
150027 -- 4 152466 -- 11 152712 -- 4 152882 -- 10 153049 -- 16
150029 -- 4 152467 -- 11 152713 -- 4 152883 -- 10 153050 -- 16
150033 -- 4 152470 -- 8 152714 -- 4 152884 -- 10 153051 -- 16
152010 -- 13 152471 -- 8 152715 -- 8 152885 -- 10 153052 -- 16
152015 -- 13 152472 -- 8 152716 -- 4 152886 -- 10 153053 -- 16
152020 -- 13 152473 -- 8 152720 -- 8 152887 -- 10 153054 -- 16
152025 -- 13 152474 -- 8 152725 -- 8 152888 -- 10 153055 -- 16
152030 -- 13 152475 -- 8 152726 -- 14 152889 -- 10 153056 -- 16
152040 -- 13 152476 -- 8 152727 -- 14 152890 -- 10 153057 -- 16
152105 -- 4 152477 -- 8 152728 -- 14 152891 -- 10 153058 -- 16
152115 -- 4 152478 -- 8 152730 -- 8 152900 -- 12 153059 -- 16
152120 -- 4 152479 -- 8 152740 -- 8 152901 -- 12 153060 -- 16
152125 -- 4 152486 -- 12 152754 -- 8 152902 -- 12 153061 -- 16
59
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
59
MGM Company, Inc. WWW.MGMCOMPANY.COM
PART NUMBBER TO PAGE NUMBER INDEX
241200 -- 49 259094 -- 54 276064 -- 26 331030 -- 38 394045 -- 35
241202 -- 25 259095 -- 54 276065 -- 26 331031 -- 38 394048 -- 34
241203 -- 25 259096 -- 54 276066 -- 26 331032 -- 38 394050 -- 34
241204 -- 25 259097 -- 54 276067 -- 26 331033 -- 38 394055 -- 35
241240 -- 21 259098 -- 54 276068 -- 24 331040 -- 38 394057 -- 35
241242 -- 49 259099 -- 54 276069 -- 26 331041 -- 38 395001 -- 35
241244 -- 49 259102 -- 54 276070 -- 24 331042 -- 38 395005 -- 35
241246 -- 49 259103 -- 54 276071 -- 49 331043 -- 38 395007 -- 35
241247 -- 21 259302 -- 55 276072 -- 25 331060 -- 38 395008 -- 35
241248 -- 21 259303 -- 55 276073 -- 49 331061 -- 38 395009 -- 35
241249 -- 49 271205 -- 25 276074 -- 24 331062 -- 38 395025 -- 35
241250 -- 21 271207 -- 18 276075 -- 16 331063 -- 38 396000 -- 35
241252 -- 21 271208 -- 25 276075 -- 18 361003 -- 36 396013 -- 33
241254 -- 21 271209 -- 18 276080 -- 24 361055 -- 45 396014 -- 33
241256 -- 21 271209 -- 25 276100 -- 25 361102 -- 36 396016 -- 33
241258 -- 49 271211 -- 25 276101 -- 25 361107 -- 36 396020 -- 31
241264 -- 21 275069 -- 18 292004 -- 54 361109 -- 36 396022 -- 35
241300 -- 21 275069 -- 25 301200 -- 45 361110 -- 36 396023 -- 32
241302 -- 21 275070 -- 18 301264 -- 25 361115 -- 36 396024 -- 32
242006 -- 21 275070 -- 25 301503 -- 45 361118 -- 36 396025 -- 31
242008 -- 21 275072 -- 24 305000 -- 46 361119 -- 36 396026 -- 34
242009 -- 21 275075 -- 25 305001 -- 46 361122 -- 36 396027 -- 34
242010 -- 21 276001 -- 25 305020 -- 46 361137 -- 45 396030 -- 34
242011 -- 21 276003 -- 25 305022 -- 46 363000 -- 45 396032 -- 34
242012 -- 21 276004 -- 25 305023 -- 46 363002 -- 46 396034 -- 34
242019 -- 21 276006 -- 24 305024 -- 46 363004 -- 46 396050 -- 35
242100 -- 21 276008 -- 24 305025 -- 46 363005 -- 45 396051 -- 34
242105 -- 21 276009 -- 24 305026 -- 46 363006 -- 45 396051 -- 35
242120 -- 49 276012 -- 24 305027 -- 46 364301 -- 36 396052 -- 34
242121 -- 49 276015 -- 24 305028 -- 46 366101 -- 36 396055 -- 35
245100 -- 21 276017 -- 24 305029 -- 46 366201 -- 36 396058 -- 34
245101 -- 21 276018 -- 24 305030 -- 46 366301 -- 36 396109 -- 31
245103 -- 21 276020 -- 24 305031 -- 46 366401 -- 36 396674 -- 32
245104 -- 21 276024 -- 24 305033 -- 46 366402 -- 36 420018 -- 47
245107 -- 21 276025 -- 24 305040 -- 46 366601 -- 36 420022 -- 47
245108 -- 21 276030 -- 24 305041 -- 46 366801 -- 36 420029 -- 47
245110 -- 21 276040 -- 24 305042 -- 46 367101 -- 36 420036 -- 47
245120 -- 49 276045 -- 24 305043 -- 46 367201 -- 36 420049 -- 47
245125 -- 49 276047 -- 24 305045 -- 46 367301 -- 36 420060 -- 47
245128 -- 49 276048 -- 24 305046 -- 46 367311 -- 36 420072 -- 47
245130 -- 49 276049 -- 24 305048 -- 46 368101 -- 36 420115 -- 47
255200 -- 54 276052 -- 24 305055 -- 46 368201 -- 36 420130 -- 47
255201 -- 54 276054 -- 24 331015 -- 38 368301 -- 36 420140 -- 47
255202 -- 54 276054 -- 25 331016 -- 38 368375 -- 36 420150 -- 47
255204 -- 54 276055 -- 24 331017 -- 38 368401 -- 36 420160 -- 47
255205 -- 54 276056 -- 24 331018 -- 38 368402 -- 36 420180 -- 47
255207 -- 54 276059 -- 26 331020 -- 38 368601 -- 36 420615 -- 49
259091 -- 54 276060 -- 26 331021 -- 38 368801 -- 36 421002 -- 49
259092 -- 54 276062 -- 26 331022 -- 38 368910 -- 36 421818 -- 47
259093 -- 54 276063 -- 26 331023 -- 38 368912 -- 36 422000 -- 48
60
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
60
MGM Company, Inc. WWW.MGMCOMPANY.COM
PART NUMBBER TO PAGE NUMBER INDEX
422001 -- 47 4404110 -- 42 5108251 -- 40
422002 -- 47 4406005 -- 43 5109020 -- 40
422003 -- 48 4406015 -- 43 5109030 -- 40
422004 -- 48 4417005 -- 43 5109040 -- 40
422005 -- 48 4429005 -- 43 5112020 -- 40
422008 -- 48 4429015 -- 43 5112030 -- 40
422009 -- 47 4436020 -- 43 5112040 -- 40
422012 -- 48 4436030 -- 43 5112060 -- 40
422015 -- 48 4436040 -- 43 5300020 -- 41
422020 -- 48 4437250 -- 43 5300030 -- 41
422021 -- 48 4437338 -- 43 5300040 -- 41
422022 -- 48 4437422 -- 43 5300060 -- 41
422025 -- 48 4438247 -- 43 5304020 -- 41
422105 -- 48 4438249 -- 43 5304030 -- 41
422150 -- 48 4438250 -- 43 5304040 -- 41
422151 -- 48 4438251 -- 43 5321015 -- 41
422152 -- 48 4439073 -- 44 5321020 -- 41
422153 -- 48 4447015 -- 44 5321030 -- 41
422154 -- 48 4447020 -- 44 5321040 -- 41
422155 -- 48 4447030 -- 44 5321060 -- 41
422170 -- 48 4447040 -- 44 5327020 -- 41
422171 -- 48 4447060 -- 44 5327030 -- 41
422172 -- 48 4449015 -- 44 5400015 -- 41
422173 -- 48 4449020 -- 44 5400020 -- 41
422222 -- 47 4449030 -- 44 5400030 -- 41
422229 -- 47 4449040 -- 44 5400040 -- 41
422236 -- 47 5100015 -- 39 5400060 -- 41
422249 -- 47 5100020 -- 39 5441020 -- 42
422929 -- 47 5100030 -- 39 5441030 -- 42
423085 -- 47 5100040 -- 39 5441040 -- 42
423120 -- 47 5101015 -- 39 5441060 -- 42
423150 -- 47 5101020 -- 39 5600020 -- 42
423195 -- 47 5101030 -- 39 5600030 -- 42
423280 -- 47 5101040 -- 39 5600040 -- 42
424010 -- 55 5102251 -- 39 5600060 -- 42
424012 -- 55 5102337 -- 39
424024 -- 55 5102338 -- 39
424036 -- 55 5102422 -- 39
424509 -- 55 5102532 -- 39
424513 -- 55 5103020 -- 39
4401005 -- 42 5103338 -- 40
4401020 -- 42 5105020 -- 39
4401030 -- 42 5105030 -- 39
4401040 -- 42 5105040 -- 39
4401060 -- 42 5106030 -- 40
4402247 -- 42 5106040 -- 40
4402249 -- 42 5107251 -- 40
4402335 -- 42 5107420 -- 40
4403750 -- 42 5107422 -- 40
4403900 -- 42 5107532 -- 40
61
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
61
MGM Company, Inc. WWW.MGMCOMPANY.COM
Blank Page for Customer Notes
62
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
62
MGM Company, Inc. WWW.MGMCOMPANY.COM
Blank Page for Customer Notes
63
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
63
MGM Company, Inc. WWW.MGMCOMPANY.COM
Terms: All payment terms are net 30 days. Interest charge of 1 1/2% will be charged per month after the 30 days. Pricing; All prices are subject to change without notice and are quoted FOB Orfordville, Wisconsin unless other wise indicated. Minimum Order Value $50.00. All PVC fittings, PVC Pipe Valterra gate valves are sold in Box quantities only or in the case of PVC pipe, pallet Quantities. Please refer to the specific catalog section for box/case /pallet sizes. Return: Please contact MGM Company for a return authorization number. Unless otherwise specified. Returns should be sent to: 10833 West Orfordville Hanover Road, Orfordville, Wisconsin 53576-9513. Sales Samples: Samples are available for purchasing/engineering evaluation as needed. If the item or items are over $10.00 we will ship and invoice you for the samples. You may return any invoiced samples for full credit at our expense. Please contact MGM Company to return invoiced samples and we can provide our shipping account number for returning the samples. Ordering: Email orders to: [email protected]. Fax orders to 239-236-1270. Voice Phone: 239-821-6007. Warranty Policy: MGM products are warranted to be free from defects in material and workmanship at the time they are sold by us. Our obligation under this warranty is limited to the replacement of the product and neither we nor the seller is bound by any other warranty expressed or implied, or statutory. MGM Company, Inc. nor the seller of our products is liable for any loss, damage expenses or consequen-tial damages of any kind arising out of the use or inability to use our products. All products are sold with the understanding that the end user will test them in actual use conditions and determine their suitability for the intended uses. Products in this catalog come from many sources and efforts have been made to present the manufactur-ers information accurately. The information contained in this catalog is solely for the purpose of identifying the product listed and does not express or imply a warranty that the products will necessarily conform to the illustrations and or descriptions provided. None of the information in this catalog should be substituted for the manufacturer's instructions or installation procedures. MGM Company.
TERMS
64
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
64
MGM Company, Inc. WWW.MGMCOMPANY.COM
MANFACTURERS GROUP MARKETING, INC
International Dairy Equipment: Manufacturing ·Marketing· Distribution
Offices/ Stocking Locations Florida - Wisconsin - Chicago- England
2013