miami-dade county public schoolsmaterials.dadeschools.net/pdf/paint/fspma paint committee... ·...

MIAMI-DADE COUNTY PUBLIC SCHOOLS DIVISION OF PROCUREMENT MANAGEMENT SERVICES

DEPARTMENT OF MATERIALS TESTING AND EVALUATION

FSPMA PAINT COMMITTEE REPORT SEPTEMBER 16, 2008

PREVIOUS MEETING MINUTES

Materials Testing and Evaluation Department • 7040 West Flagler Street • Miami, Florida 33144

786-275-0775 • 786-275-0833 (FAX) • http://materials.dadeschools.net/

L-1237-DD

August 1, 2008

Florida School Plant Management Association

Product Evaluation Program

Paint Specification Committee

Re: Florida School Plant Management Association (FSPMA) Regular Paint Committee Meeting of

July 25th

, 2008.

Dear Committee Members:

A regular meeting of the FSPMA Paint Committee was held on Friday, July 25th

, 2008 at the Safety

Department Building, Training Lab room, Broward County Public Schools (4200 NW 10th Ave,

Oakland Park, FL 33309).

Education Members Present:

Mr. Dan O‟Brien, Broward County Public Schools, Chairperson

Mr. Mark Alan, Broward County Public Schools

Mr. George Young, Broward County Public Schools

Mr. Doug Durham, Miami-Dade County Public Schools

Mr. Richard Simons, Miami-Dade County Public Schools

Ms. Mercedes Leon, Miami-Dade County Public Schools

Mr. Alberto Velazquez, Miami-Dade County Public Schools

Ms. Doraida Diaz, Miami-Dade County Public Schools

Industrial Members Present:

Mr. Bruce Alvin, INSL-X/Coronado Paints

Mr. Felix Flores, PPG/Pittsburg Paints

Mr. Santiago Gabriel, Flexbon/Sherwin Williams

Mr. Bill Harper, Somay Paints

Mr. Glenn Saren, TKO Waterproof Coatings

Mr. Robert Benson, TKO Waterproof Coatings

Mr. Dick Doyle, TKO Waterproof Coatings

L-1237-DD – August 1, 2008

The meeting was called by Mr. Dan O‟Brien - Committee Chairman - and the participants introduced

themselves. The committee meeting continued after the quorum of Educational Members was

confirmed.

The previous committee meeting minutes, the current FSPMA-certified brand list, an updated

historical summary report of FSPMA-related MT&E1 laboratory paint testing activity, and the payment

report associated to the FSPMA Paint Product Certification Program included in the report2 were all

reviewed and approved unanimously by the educational members. The laboratory test results obtained

since May 23rd

, 2008 as well as a list of paint samples currently placed on exterior exposure conditions

were presented by Mr. Alberto Velazquez from MT&E and were also unanimously approved.

A follow-up on the agreements reached at the previous committee meeting was conducted by Mr.

Velazquez and the related discussion and agreements will be recorded in detail in these minutes as the

different agenda topics are addressed.

.....................................................................................................................................................................

Mr. Bruce Alvin, from INSL-X/Coronado Paints brought up for discussion the possibility of

authorizing MT&E to enter into confidentiality agreements with interested vendors in order to allow

the submission of confidential, legally-binding technical information by the manufacturers to prove

compliance with selected requirements. The full-disclosure type of documents would contain specific

laboratory results pertaining to those parameters for which independent laboratory confirmation is

currently required and which had been obtained using the methods indicated in the FSPMA

specification of interest.

Ms. Diaz from MT&E expressed that her Department would favor including this option as an

additional alternative to the submission of expensive independent lab reports for compliance

confirmation as currently stated in FSPMA specifications as long as the documents are notarized and,

therefore, legally binding in nature.

Committee Agreements (unanimous):

To authorize MT&E to accept the submission of confidential, notarized, legally-binding

technical information by the manufacturers for the purpose of confirming compliance with

selected requirements. The full-disclosure type of documents will contain specific laboratory

results pertaining to those parameters for which independent laboratory confirmation is

currently required and which had been obtained using the methods indicated in the FSPMA

specification of interest.

This confidential, full-disclosure technical documentation will be added as an alternative to,

and will not supersede, the presently required independent laboratory confirmation which will

remain as an option in FSPMA specifications.

Ms. Diaz from MT&E will add this additional choice to FSPMA specifications (when

applicable) without changing the spec version number identification.

.....................................................................................................................................................................

1 Miami-Dade County Public Schools Materials Testing and Evaluation Department.

2The FSPMA Paint Committee Report for the current meeting was prepared by MT&E and posted on their website to make

it accessible to all committee members, who were timely informed of the posting via e-mail.

L-1237-DD – August 1, 2008

Ms. Diaz informed that only three vendors -INSL-X/Coronado Paints, PPG/Pittsburg Paints, and

Zinsser- had filled out and returned the spreadsheet containing the % of solids by volume of currently

approved brands. She explained that the submitted data was included in an appendix of the present

meeting report but that it is insufficient for the comprehensive FSPMA specification revision which

was agreed upon in the previous meeting.

Mr. Alvin explained that he had taken the time of reviewing several product specification sheets and

MSDSs corresponding to brands approved under different FSPMA specification categories. The

gathered data is, in his opinion, enough to allow the revision of FSPMA specifications (when

applicable) to include a % of solids by volume acceptance criteria that reflects current industry

standards and school district minimum quality needs.


Mr. Bruce Alvin from INSL-X/Coronado Paints will compile in one document (MS Excel or

Word) the % of solids by volume information obtained for currently FSPMA-certified brands

based on their corresponding product specification sheets and/or MSDSs. Based on this

information Mr. Alvin will also include in the document the proposed acceptance criteria for

each impacted specification.

Mr. Alvin will e-mail Ms Diaz from MT&E an electronic copy of the revision, which she will

include as an appendix in the next committee meeting report in order to allow all members to

revise it before discussing and voting on the issue.

.....................................................................................................................................................................

Mr. Velazquez and Ms. Leon from MT&E showed to all the participants the resulting panels obtained

for the stain block test currently included in MP-38.1 -„Exterior/Interior, Alkali Resistant Stain Block

Universal Primer/Sealer‟ for two samples: 1) the INSL-X/Coronado Paints „Grip & Seal Latex Stain

Killer 116-11 [MT&E Lab # P2546], which is the only presently-certified MP-38.1 brand, and 2) the

PPG/Pittsburg Paints „Seal Grip Int/Ext 100% Acrylic Universal Primer/Sealer 17-921‟ [MT&E Lab #

P2591], which is a brand currently in process of being tested to determine compliance with MP-38.1.

As can be observed from the pictures above, the same blue, green, and red Dennison „Mark-A-Lot‟

(broad tip) marker stains clearly showed through the specified primer and top coat applications on both

glass panels with similar intensity. The stains corresponding to the red Sanford „Sharpie‟ permanent

INSL-X/Coronado Paints ‘Grip & Seal Latex Stain Killer 116-11 [MT&E Lab # P2546].

PPG/Pittsburg Paints ‘Seal Grip Int/Ext 100% Acrylic Universal Primer/Sealer 17-

921’ [MT&E Lab # P2591].

L-1237-DD – August 1, 2008

marker showed through at a comparatively weaker level also on both the Coronado „Grip & Seal‟ and

the PPG „Seal Grip‟ samples.

A consensus was reached among the committee members regarding the use of the INSL-X/Coronado

Paints „Grip & Seal Latex Stain Killer 116-11 [MT&E Lab # P2546] as a reference standard to

determine future compliance of samples with the MP-38.1 stain block test. The participants also

considered that the stain block test results for the PPG/Pittsburg Paints „Seal Grip Int/Ext 100%

Acrylic Universal Primer/Sealer 17-921‟ [MT&E Lab # P2591] sample could be considered equivalent

to those obtained for the reference Coronado brand.


The MP-38.2 -‘Exterior/Interior, Alkali Resistant Stain Block Universal Primer/Sealer’

acceptance criterion to determine compliance with the stain block test will be revised to require

in the future that samples shall yield results equal or better than those obtained with the INSL-

X/Coronado Paints ‘Grip & Seal Latex Stain Killer 116-11 [MT&E Lab # P2546], which will

be formally considered the standard reference material for this test.

The glass panel obtained for MT&E Lab # P2546 (Coronado ‘Grip & Seal’) will be kept at

MT&E for comparison purposes and fresh additional panels will be produced in the future

whenever necessary.

The newly revised MP-38.3-‘Exterior/Interior, Alkali Resistant Stain Block Universal

Primer/Sealer’ will be prepared by Ms. Diaz from MT&E and posted on both the official

FSPMA website (http://www.fspma.com/) and the MT&E website

(http://materials.dadeschools.net/). See all revised specifications attached to this document.

PPG/Pittsburg Paints ‘Seal Grip Int/Ext 100% Acrylic Universal Primer/Sealer 17-921’

[MT&E Lab # P2591] is considered to be in compliance with the new stain block test

acceptability criteria included in MP-38.3 because it yielded results which could be qualified

as equal to those obtained for the standard reference material.

.....................................................................................................................................................................

Following one of the agreements reached at the previous committee meeting, Mr. Bruce Alvin

introduced the newly revised version of the „Zero VOC‟ FSPMA specifications originally

submitted by INSL-X/Coronado Paints: a) Interior „Zero VOC‟ Odorless Acrylic Primer, b) „Zero

VOC‟ Interior Flat, c) „Zero VOC‟ Interior Eggshell, and d) „Zero VOC‟ Interior Semi-Gloss.

Mr. Alvin, Mr. Dan O‟Brien, Mr. Mark Alan, Mr. Doug Durham, Ms. Doraida Diaz, Mr. Robert

Benson, and Mr. Dick Doyle participated in a lengthy discussion in which the following „Zero

VOC‟-related topics addressed:

1. The convenience of using „Zero VOC‟ versus „Low VOC‟ products considering the higher

cost of the first was discussed as well as if it would be advisable for vendors to spend

money in certifying products for which no future demand is anticipated from school

districts.

2. Present budget restrictions for the school districts are an important factor to take into

account and several educational members expressed that the demand for these special paints

could be years out but also that it might be a good idea to have „Zero VOC‟ specs ready in

the event unexpected demand does arise.

http://www.fspma.com/

http://materials.dadeschools.net/

L-1237-DD – August 1, 2008

3. There is apparently no clear definition of what a “green” paint is and LEED3-certified work

only requires low VOC content (i.e. approximately a maximum VOC allowable

concentration of 50g/L). On the other hand, „Zero VOC‟ paints could be favorable in LEED

projects since they would allow more latitude for higher VOC-emitting products in other

parts of the project in order to meet overall compliance requirements.

4. If the committee decides to continue the process of including „Zero VOC‟ FSPMA

categories, a final revision of all quantitative and qualitative parameters included in these

proposed specs along with acceptance criteria and specified individual methods should be

conducted by a sub-committee conformed by vendors. Special emphasis should be put in

revising the maximum VOC acceptable limit of 5 g/L included in all proposed „Zero VOC‟

specs and the indicated standard method should be clearly indicated.

5. There is only one active „Low VOC‟ FSPMA paint specification - MP-39.0 – „Latex-Base,

Low Odor, Low VOC Eggshell, Interior White and Tints‟- It would probably be more

prudent to withdraw MP-39.0 and add VOC limits to existing interior wall paint specs than

adding several paint „Low VOC‟ paint specification categories.


Mr. Bruce Alvin, from INSL-X/Coronado Paints, and Mr. Robert Benson & Mr. Dick Doyle

from TKO Waterproof Coatings will conform a sub-committee for the complete revision of the

‘Zero VOC’ FSPMA specifications originally submitted by Coronado: a) Interior ‘Zero VOC’

Odorless Acrylic Primer, b) ‘Zero VOC’ Interior Flat, c) ‘Zero VOC’ Interior Eggshell, and d)

‘Zero VOC’ Interior Semi-Gloss. Mr. Alvin will e-mail Ms. Diaz an electronic copy of the

resulting proposed versions so they could be included in the next committee meeting report.

FSPMA MP-39.0 – ‘Latex-Base, Low Odor, Low VOC Eggshell, Interior White and Tints’ will

be withdrawn and no additional samples will be accepted for certification under this category.

This information will be clearly posted by Ms. Diaz on both the official FSPMA website

(http://www.fspma.com/) and the MT&E website (http://materials.dadeschools.net/). The two

brands currently-approved under MP-39.0 will remain posted as usual until their respective

FSPMA certification expiration dates as long as annual posting confirmation fees are timely

paid.

The agenda of the upcoming September, 2008 committee meeting shall include a point to discuss

the convenience of adding maximum allowable VOC limits to existing FSPMA interior wall

paint specifications in order to actively move towards more environmentally-friendly products

without reducing the minimum performance level required at school sites.

.....................................................................................................................................................................

The committee reviewed in detail each of the proposed changes recommended for the following

FSPMA specifications: 1) MP-5.7-„ Enamel, Alkyd, Gloss, White and Tints‟, 2) MP-6.11-‘ Exterior-

Interior Enamel, Latex-Base, Semi-Gloss, Whites and Tints‟, 3) MP-14.4-„Primer Coating, Latex

Conditioner For Chalking Exterior Surface‟, 4) MP-32.3- „Interior Enamel, Latex-Base, Semi-Gloss,

Whites and Tints‟, 5) MP-44.2-„Acrylic Base Interior Textured Coating Aggregate and Non-

Aggregate‟, and 6) MP-56.2-„ Elastomeric Roof Paint‟. The changes include corrections as well as

testing procedures and acceptance criteria revisions proposed by different vendors and MT&E. No

additional changes were recommended during the meeting and all members supported the revisions

included in the report.

3 Leadership in Energy & Environmental Design Green Building Rating System™ is a voluntary, consensus-based

standard to support and certify successful green building design, construction and operations. LEED provides a nationally

recognized certification system to promote integrated, whole-building design practices in the building industry.



L-1237-DD – August 1, 2008


The changes recommended for MP-5.7-‘ Enamel, Alkyd, Gloss, White and Tints’, MP-6.11-‘

Exterior-Interior Enamel, Latex-Base, Semi-Gloss, Whites and Tints’, MP-14.4-‘Primer

Coating, Latex Conditioner For Chalking Exterior Surface’, MP-32.3- ‘Interior Enamel, Latex-

Base, Semi-Gloss, Whites and Tints’, MP-44.2-‘Acrylic Base Interior Textured Coating

Aggregate and Non-Aggregate’, and MP-56.2-‘ Elastomeric Roof Paint’ were approved.

The newly FSPMA revised specifications will be prepared by Ms. Diaz from MT&E and posted

on both the official FSPMA website (http://www.fspma.com/) and the MT&E website


...............................................................................................................................................................

The final version of the revised proposed FSPMA specifications MP-57 – „Agricultural Oil-Based

Roof Coating Sealer‟ and MP-58 – „Agricultural Oil-Based Architectural Coating Sealer‟ were

presented by Mr. Robert Benson & Mr. Dick Doyle from TKO Waterproof Coatings.

Mr. Velazquez and Ms. Diaz from MT&E pointed out that no units were indicated for several

quantitative parameters like solar reflectance, flame spread, and thermal emmittance. Also, no Dry

Film Thickness (DFT) was indicated for the permeability test on proposed MP-58. There was a general

consensus among members to approve the proposed specs as long as TKO provides the missing

information for its inclusion in these minutes4.

Committee Agreement (unanimous):

The committee approved the inclusion of two new FSPMA specifications: MP-57–‘Agricultural

Oil-Based Roof Coating Sealer’ and MP-58–‘Agricultural Oil-Based Architectural Coating

Sealer’ as long as TKO provides some information related to missing quantitative parameter

units and permeability DFT for MP-584.

Ms. Diaz from MT&E will post the newly-approved MP-57 and MP-58 on both the official

FSPMA website (http://www.fspma.com/) and the MT&E website


...............................................................................................................................................................

Mr. Alvin addressed the committee explaining that INSL-X/Coronado Paints had sent a second re-test

sample for MT&E Lab # P2587, which had failed compliance testing/evaluation as per MP-28.3,

because he had received information regarding the fact that MT&E had apparently temporarily

misplaced the first re-test sample sent by Coronado. Even though he had been informed by MT&E

personnel that the first re-test sample MT&E Lab # P2589 had also been tested and failed, he would

like to request the committee to consider the possibility of instructing MT&E to also test/evaluate the

second re-test sample considering the confusion surrounding this brand evaluation.

Ms. Mercedes Leon and Mr. Alberto Velazquez from MT&E intervened to explain the committee that

there was no misplacement of the first re-test sample sent because the original P2587 had failed to

meet the viscosity acceptance criteria. The re-test sample for P2587 (P-2589) was received, tested,

found not to be in compliance (also because it did not meet the viscosity acceptable range for MP-

4 Mr. Dick Doyle from TKO submitted the requested technical information on July 31, 2008 and it is already included in the

newly-approved MP-57 and MP-58 specifications attached to this document.





L-1237-DD – August 1, 2008

28.3), and the vendor was informed of the re-test failing results before the second re-test sample

mentioned by Mr. Alvin was delivered to MT&E.

Ms. Leon and Mr. Velazquez expressed that they do not think a second re-test sample testing should be

allowed because there was no confusion whatsoever and the results reported for the referenced samples

are reliable and appropriately backed by laboratory reference standards within the working range. Mr.

O‟Brien and Ms. Diaz both expressed their concern in relation to the creation of a precedent which

could be used by other vendors in the future to demand second re-tests for brands submitted for

FSPMA certification without having any valid reason behind it other than the fact that their product(s)

failed twice.

Committee Agreement (unanimous):

The second re-test sample sent by INSL-X/Coronado Paints for failing MT&E Lab # P2587 will

not be tested by MT&E and the results obtained for the first re-test sample (P-2589) will

remain as the official re-test results recorded for this brand.

...............................................................................................................................................................

This concluded business transacted at the July 25th

, 2008 meeting of the FSPMA Paint Committee. The

next committee meeting has been scheduled for Tuesday September 16th, 2008 during the FSPMA

Annual Conference to be held at the Daytona Beach Hilton.

Thank you for your participation.

Sincerely,

Doraida Diaz, Supervisor

Department of Materials Testing and Evaluation

Miami-Dade County Public Schools

DD:AV:ML:aek

Attachment

cc: Mr. Joseph A. Gomez, MDCPS, #9171

Mr. Barry S. Meltz, MDCPS, #9171

Ms. Barbara D. Jones, MDCPS, #9171

Ms. Vivian DeRussy, FSPMA Director of Committees

MT&E Files

Attachment

Page 1 MP-5.7- ENAMEL, ALKYD, GLOSS, WHITE AND TINTS

F.S.P.M.A. PAINT SPECIFICATION

FOR GENERAL EDUCATION FACILITIES USE

MP- 5.7 ENAMEL, ALKYD, GLOSS, WHITE AND TINTS

I. SCOPE, USE AND CLASSIFICATION: A. SCOPE. This specification covers a high-grade Alkyd-type high-gloss enamel intended for use on

primed exterior and interior wood or metal. It is highly weather-resistant and is characterized by good color and gloss retention, good drying, freedom from after-tack, and good flexibility. Weathering produces mild chalking rather than checking or cracking.

B. USE. Containers shall have labels, meeting ANSI standards and giving adequate use instructions,

firmly secured to each container. Labels shall meet all federal regulation requirements of the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard in CFR 1910.1200.

C. CLASSIFICATION. The enamel covered by this specification shall be of the following types:

Type I. White. Certification shall be for Type I only. Type II. Tints. All tinted paints supplied to purchaser must meet all requirements of this specification, except pigment.

II. REQUIREMENTS: A. MATERIALS. The paint shall be formulated from materials as specified herein. Materials not

specified shall be selected by the supplier and shall be subject to all the provisions of this specification. The paint shall be free from material which is known to be toxic to personnel under normal conditions of use.

1. PIGMENT. The pigments or any combination thereof, including extenders, shall be good

commercial quality provided the resulting enamel complies with all the requirements specified herein. The prime pigment shall consist of titanium dioxide conforming to ASTM D 476, Type II, and zinc oxide is permitted at the discretion of the supplier provided the enamel complies to all requirements. Tinting pigments may be used when necessary to match the color required provided these additional pigments have good color permanence.

2. VEHICLE. The vehicle shall consist of alkyd resin solutions with an acid number not to exceed

10 on resin nonvolatiles. 3. RESTRICTED METALS. The paint shall comply with the latest requirements of the Federal,

Florida State, City or Local Governments for maximum allowable restricted metals content. 4. VOC COMPLIANCE. The paint shall comply with the latest requirements of the Federal,

Florida State, City or Local Governments for the maximum allowable VOC content at the time of purchase.

B. QUANTITATIVE REQUIREMENTS. The paint shall conform to the quantitative requirements as specified in Tables I and II.

Attachment


TABLE I. QUANTITATIVE REQUIREMENTS

* Using 3 mil wet film thickness over plate glass backed with white paper.

TABLE II. MINIMUM DRY FILM CONTRAST RATIO FOR TINTS AT 540 SQ. FT./GALLON

Apparent % Reflectivity

Contrast Ratio

Apparent % Reflectivity

Contrast Ratio

82 and above 80 78 76 74 72

0.95 0.96 0.96 0.96 0.97 0.97

70 68 66 64 62

60 and lower

0.98 0.98 0.98 0.99 0.99 1.00

C. QUALITATIVE REQUIREMENTS.

1. COLOR. The color of the paint specified in the contract or purchase order shall match that of the standard color chip. If a color other than white is required, the color shall match that of the standard color chip submitted by the purchaser with the bid.

2. STORAGE STABILITY IN A PARTIALLY FULL CONTAINER. The paint shall show no skinning after

48 hours when tested as specified in III.F. It shall mix readily to a homogenous state and the viscosity change shall not be greater than ± 10 K.U.

3. STORAGE STABILITY IN UNOPENED CONTAINER. All containers shall have sufficient

preservatives to prevent spoilage for one year. 4. ODOR. The odor shall not be putrid during or after application.

CHARACTERISTICS TOLERANCE REQUIREMENTS

MINIMUM MAXIMUM

1. Pigment, % by wt. of enamel. 30 2 (-2)% 38 (+2)%

2. Nonvolatile vehicle, % by wt. of vehicle. 50% -

3. Consistency, K.U. 77 (-4) 89 (+4)

4. Drying time of enamel: a. Set-to-touch, hours b. Dry hard, hours

1/2 -

2 16

5. 600 specular gloss, after 168 hours air drying*.

61

-

6. Fineness of grind, N.S. 6

-

7. Directional reflectance, 45- 0 White only.

86 (-1)

-

8. Hiding power (contrast ratio), at 540 sq. ft/gallon.

a. White only b. Tints

0.95 See Table II

- -

Attachment


5. MATERIAL SAFETY DATA SHEET (MSDS). An MSDS clearly identifying this product, filled out completely according to the Florida Right-to-Know Law, Chapter 442, Florida Statutes, MUST B submitted with each sample submitted for certification.

6. CONDITION IN CONTAINER. The paint, when tested as specified in Table III., shall be free

from grit, seeds, skins, lumps, and livering, and shall show no more pigment settling or caking than can be reincorporated into a smooth homogenous state. In a freshly opened container, there shall be no rusting of the container.

7. RECOATING. When tested as in III.C., there shall be no flashing, lifting, mottling, orange

peeling, spotting, or wrinkling. 8. FUNGUS PROPERTIES. The paint shall contain no mercury, but shall contain fungicidal

protection equivalent to 0.1% mercury as metal by total weight of paint. 9. BRUSH PROPERTIES. The paint shall brush satisfactorily in all respects and shall dry to a

smooth, glossy, uniform film. 10. FLEXIBILITY. When tested as in III.B., there shall be no cracking, chipping, or flaking. 11. SAG RESISTANCE. The paint shall have a minimum anti-sag index of 7.0 when tested as in

III.D. 12. EXPOSURE TEST. When test panels prepared as in III.F. are exposed in a South Florida

environment, at 45 South, they shall achieve an overall rating of Good when graded for developments (i.e., cracking, blistering, mildewing, rusting, chalking, flaking, gloss retention, and other deteriorations) by a professional exposure testing company.

III. TEST PROCEDURES FOR LABORATORY ANALYSIS: The failure of any test in this section shall constitute a failure of the product to conform to the specification. Unless otherwise noted, the test methods cited are the latest published revisions. A. PHYSICAL AND CHEMICAL PROPERTIES. The following tests shall be conducted in accordance

with the methods as specified in Table III. TABLE III. TESTS AND METHODS

* Except use a 3/4 filled 1/2 pint, multiple friction-top can.

TEST METHODS

Condition in container FTM Std.141C, Meth. 3011.2

Skinning* FTM Std.141C, Meth. 3021.1

Pigment, % by wt. of enamel ASTM D 2371

Nonvolatile vehicle, % by wt. of vehicle FTM Std.141C, Meth. 4051.1

Consistency, K.U. ASTM D 562

Drying time ASTM D 1640

600 Specular gloss ASTM D 523

Fineness of grind ASTM D 1210

Directional reflectance, 45- 0 ASTM E 97

Hiding power, contrast ratio at 540 sq. ft./gallon

ASTM D 2805

Attachment


B. FLEXIBILITY. Draw down a film of the enamel on a flat, tin-plated, 31 gage, steel panel with an

applicator which produces a dry film 0.003 in. thick. Air dry for 18 hours, bake for 5 hours at 105C., cool for 1/2 hour at room temperature, and bend over a 1/8 in. mandrel. Examine the coating for cracks over the area of the bend in a strong light at 7X magnification.

C. RECOATING. Draw down the paint on a sealed chart with an applicator which produces a wet

film 0.003 inches thick as in Method 4061.2 of Fed. Test Method Std. No. 141C. Air dry for 24 hours under room conditions. Apply a second coat perpendicular to the first coat, and then air dry as before. Examine for compliance with II.C.7.

D. SAG RESISTANCE. Mount a sealed Morest or Leneta test chart on a vacuum plate. Set the Lenta

Anti-Sag Meter at the top of the test chart with the open side of the blade facing the operator. Place a suitable quantity of the enamel directly in front of the blade, and draw down the enamel. The completed draw down shall then be immediately removed from the vacuum plate and placed in a vertical position with the stripes horizontal, the thinnest stripe being at the top. Allow to dry at room temperature in this position, and then determine the Anti-Sag Index as follows:

The lowest (heaviest film thickness) stripe which does not touch the next lower stripe is the Index Stripe. Fractional values are obtained by adding to the index value a fractional value based on the degree to which the stripe below the index stripe has merged with the next stripe as follows: DEGREE OF MERGER ADD Complete (intervening block is completely wetted) 0.0 Not complete, but definitely more than half 0.2 Approximately half 0.4 Appreciable, but definitely less than half 0.6 Slight, just touching 0.8

E. STORAGE STABILITY IN PARTIALLY FULL CONTAINER. Determine skinning after 48 hours in

accordance with Federal Test Method Std. 141C, Method 3021.1, except use a 3/4 filled 1 pint, multiple friction-top can. Check for compliance with II.C.2.

F. EXPOSURE TEST. Three 6" X 12" panels shall be prepared using smooth-sanded, clear, yellow

pine strips prepared as in ASTM D 358-83 and three 6" X 12" panels shall be prepared using clean, degreased cold roll steel strips prepared as in ASTM D 1014. Application shall be by brushing only, and shall follow the manufacturer's label instructions as closely as possible. Any primer or other product which is recommended by the manufacturer for use in preparing the surface for application of the test sample shall be furnished with the sample. Check for compliance with II.C.12.

IV. METHODS OF SAMPLING AND INSPECTION: A. SAMPLING. At the option of the purchaser, representative samples shall be taken from

deliveries made under this invitation and submitted for quality control testing. If the purchaser's sample fails, the manufacturer shall pay for the actual cost of testing. Failure of any sample so taken to comply with the specification requirements shall invalidate any purchase contract made under this invitation unless the manufacturer requests a repeat quality control test. This second sample shall be from the same batch. The manufacturer shall also pay for the second quality control test should the sample fail, and this invalidates any purchase contract made under this invitation. If the second sample passes, the manufacturer

Attachment


is not responsible for paying the actual cost of the test, and results obtained from the second quality control test shall prevail.

B. INSPECTION. Physical inspection of package, condition, quantity, and labeling shall be made at

point of delivery by the purchaser. MSDS shall be submitted with each shipment in accordance with the Florida Right-to-Know Law, Chapter 442, Florida Statutes, and shall be identical to the MSDS supplied for initial certification.

NOTE: TESTING TO MEET THIS SPECIFICATION DOES NOT INCLUDE AN IN-USE PERFORMANCE TEST. ALL EDUCATIONAL AGENCIES SHOULD CONSIDER AN IN-USE PERFORMANCE TEST BEFORE PURCHASING THIS PRODUCT. ORIGINAL MP-5 - APPROVED February 2, 1978 (by FSPMA) REVISION MP-5.6 - EFFECTIVE June 1, 1995 REVISION MP-5.7 - APPROVED on July 25, 2008 ________________________________________________________ PRESIDENT FLORIDA SCHOOL PLANT MANAGEMENT ASSOCIATION ________________________________________________________ CHAIR FSPMA CUSTODIAL/FOOD SERVICE CHEMICAL SPECIFICATION COMMITTEE

Attachment

Page 1 MP- 6.11 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS, WHITES AND TINTS


DIVISION 9 – FINISHES SECTION 09920 INTERIOR


MP- 6.11

EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS, WHITES AND TINTS

I. SCOPE, USE AND CLASSIFICATION:

A. SCOPE. The latex-base semi-gloss covered by this specification is intended for use on interior and exterior wall and ceiling surfaces such as wallboard, wall paper, wood and plaster. It may be applied to previously primed or painted wood, plaster or dry wall surfaces.

B. USE. Glossy finishes should be dulled either by sanding or by washing with a solvent-type cleaner prior to application of the paint. All new surfaces should be primed with a primer having adequate enamel holdout. Containers shall have labels, meeting ANSI standards and giving adequate use instructions, firmly secured to each container. Labels shall meet all federal regulation requirements of the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard in CFR 1910.1200.

C. CLASSIFICATION. The paint covered by this specification shall be of the following types:

1. Type I. White. DOE certification shall be for Type I only.

2. Type II. Tints. All tinted paints supplied to purchaser must meet all requirements of this specification, except pigment.

II. REQUIREMENTS:

A. MATERIALS. The paint shall be formulated from materials as specified herein. Materials not specified shall be selected by the supplier and shall be subject to all the provisions of this specification. The paint shall be free from material which is known to be toxic to personnel under normal conditions of use.

1. PIGMENT. Suitable lightfast and alkali resistant pigments shall be used. Extender pigments, shading pigments, and titanium dioxide conforming to ASTM D 476-84, type II or type III, may be used when necessary to match the color desired provided the paint complies with all the requirements specified herein.

2. VEHICLE. The vehicle shall be a stable aqueous dispersion of resin prepared by emulsion polymerization.

3. RESTRICTED METALS. The paint shall comply with the latest requirements of the Federal, Florida State, City or Local Governments for maximum allowable restricted metals content.

4. VOC COMPLIANCE. The paint shall comply with the latest requirements of the Federal, Florida State, City or Local Governments for the maximum allowable VOC content at the time of purchase.

Attachment


B. QUANTITATIVE REQUIREMENTS. The paint shall conform to the quantitative requirements as specified in Tables I and II.

Unless otherwise noted, the test methods cited are the latest published revisions.


CHARACTERISTICS

TOLERANCE REQUIREMENTS

MINIMUM MAXIMUM

Nonvolatile matter, % by wt. of paint Fineness of grind, N.S. Drying time of enamel Set-to-touch, minutes Dry hard, hours Consistency, K.U. 60 Specular gloss, after 48 hours air drying* Directional reflectance, 45- 0 White only Opacity, contrast ratio, @ 450 sq. ft./gallon, White only Tints

45 5 - -

80 25

86 (-1) 0.95

See Table II

- -

30 18 112 60 - - -

Using 3 mil wet film thickness over plate glass backed with white paper.

TABLE II. MINIMUM DRY FILM CONTRAST RATIO FOR TINTS AT 450 SQ. FT./GALLON

APPARENT REFLECTIVITY, % CONTRAST RATIO

82 80 78 76 74 72 70 68 66 64 62

60 and below

0.95 0.96 0.96 0.96 0.97 0.97 0.98 0.98 0.99 0.99 0.99 1.00


1. COLOR. The color of the paint specified in the contract or purchase order shall match that of the standard color chip.

If a color other than white is required, the color shall match that of the standard color chip submitted by the purchaser with the bid.

2. STORAGE STABILITY IN A PARTIALLY FULL CONTAINER. The paint shall show no skinning after 48 hours when tested a specified in III.F. After an additional 14 days, at 120 F., the same sample shall show no skinning, livering, curdling, hard caking, or gummy sediment. It shall mix readily to a homogenous state and the viscosity change shall not be greater than ± 10 K.U.

3. STORAGE STABILITY IN UNOPENED CONTAINER. All containers shall have sufficient preservatives to prevent spoilage for one year.

4. ODOR. The odor shall not be putrid during or after application.

Attachment


5. ALKALI RESISTANCE. The paint film, tested as in III.C., shall show no change in hue and not more than very slight changes in reflectance and gloss. There shall be no evidence of blistering, softening, or wrinkling.

6. MATERIAL SAFETY DATA SHEET (MSDS). An MSDS clearly identifying this product, filled out completely according to the Florida Right-to-Know Law, Chapter 442, Florida Statutes, MUST BE submitted for certification.

7. CONDITION IN CONTAINER. The paint, when tested as specified in Table III, shall be free from grit, seeds, skins, lumps, and livering, and shall show no more pigment settling or caking than can be reincorporated into a smooth homogenous state. In a freshly opened container, there shall be no rusting of the container.

8. FUNGUS PROPERTIES. The paint shall contain no mercury, but shall contain fungicidal protection equivalent to 0.1% mercury as metal by total weight of paint.

9. FLEXIBILITY. When tested as in III.D., there shall be no cracking, chipping, or flaking.

10. SAG RESISTANCE. The paint shall have a minimum anti-sag index of 7.0 when tested as in III.E.

11. ADHESION. 100 lbs./sq. in. minimum when tested according to III.B.2. (Revised from no evidence of failure of top coat when test by Gardner Washability Machine method per committee vote on 3/10/2000.)

12. EXPOSURE TEST. When test panels prepared as in III.G. are exposed in a South Florida environment, at 45 South, they shall achieve an overall rating of Good when graded for developments (i.e., cracking, blistering, mildewing, rusting, chalking, flaking, gloss retention, and other deteriorations) by a professional exposure testing company.

III. TEST PROCEDURES FOR LABORATORY ANALYSIS:

The failure of any test in this section shall constitute a failure of the product to conform to the specification.

Unless otherwise noted, the test methods cited are the latest published revisions.

A. PHYSICAL AND CHEMICAL PROPERTIES. The following tests shall be conducted in accordance with the methods as specified in Table III.

TABLE III. TESTS AND METHODS

TEST METHODS

Condition in container Skinning Nonvolatile content, % by wt. of paint Fineness of grind Drying time: Set-to-touch Dry hard Consistency, Krebs-Stormer 60 specular gloss Directional reflectance, 45- 0 Dry opacity

FTM Std.141C, Meth. 3011.2 FTM Std.141C, Meth. 301221.1 ASTM D 2369 ASTM D 1210 ASTM D 1640 ASTM D 1640 ASTM D 562 ASTM D 523 ASTM E 97 ASTM D 2805

Attachment


B. ADHESION.

1. Specimens. Prepare specimens for testing by using a 6” X 12” steel Q panel with a ground surface which has been cleaned as in Method 2011.1 (Revised from 20112.2 on 3/24/2000) of Fed. Test Method Std. No. 141C. Apply alkyd enamel conforming to MP-5 by a draw-down with suitable applicator obtaining a dry film thickness of 3.0(±0.3) mil and a width of 5-1/2 inches. Allow the alkyd enamel to dry in a horizontal position for 3 days at 77 (±3)F. and 50(±5)% relative humidity, then bake for two hours at 200F. Prepare as indicated in paragraph I.B. Apply the test paint by draw-down as above in a direction perpendicular to the long axis of the panel to obtain a dry film of 2.0(±0.2) mils thickness and a width of approximately 2 inches. Allow the test paint to cure for two weeks at the same conditions cited above (Revised from 48 hours on 3/24/2000).

2. Procedure. Conduct the adhesion test with the PATTI Adhesion Tester as per ASTM D 4541 and determine compliance with II.C.11 (100 lbs./sq. in. minimum). (Revised from Gardner Washability Machine method per committee vote on 3/10/2000.)

C. ALKALI RESISTANCE. Prepare 6” X 3” panels as specified in III.B.1 and allow to air dry 120 hours after the application of the paint. Place 5 drops of 2% by wt. aqueous sodium hydroxide solution on the paint and immediately cover the surface with a 50 mm watchglass. After 2 hours, remove the watchglass, wash off the solution. Allow 2 hours for recovery and examine for compliance with II.C.5.

D. FLEXIBILITY. Prepare the test panel in accordance with Method 2012.2 of Fed. Test Method Standard No. 141C. Supplement the test panel cleaning procedure with an additional cleaning with abrasive soap (such as Bon Ami or equal) so that the entire surface of the panel is wet. Apply the paint in accordance with Method 2162 of Federal Test Method Standard No. 141C on the clean, dry panel with a 0.003-inch (approximately 0.006-inch gap clearance) Bird film applicator or similar blade which produces the same film thickness. Air dry for 18 hours, bake for 3 hours at 105(+2)F., then cool for 1/2 hour. Bend over a 1/8-inch mandrel and examine in accordance with Method 6221 of Federal Test Method Standard No. 141C for compliance with II.C.9.

E. SAG RESISTANCE. Mount a sealed Morest or Leneta test chart on a vacuum plate of an automatic film applicator. Set the Leneta Anti-Sag Meter at the top of the test chart with the open side of the blade facing the operator. Place a suitable quantity of the paint directly in front of the blade, and draw down the paint. The completed draw down shall then be immediately removed from the automatic film applicator and placed in a vertical position with the stripes horizontal and the thinnest stripe at the top. Allow to dry at room temperature in this position and then determine the Anti-Sag Index as follows:

The lowest (heaviest film thickness) stripe which does not touch the next lower stripe is the Index Stripe. Fractional values are obtained by adding to the index value fractional values based on the degree to which the stripe below the index stripe has merged with the next stripe as follows:

DEGREE OF MERGER ADD Complete (intervening block is completely wetted) ............ 0.0 Not complete, but definitely more than half ..................... 0.2 Approximately half ...................................................... 0.4 Appreciable, but definitely less than half.......................... 0.6 Slight, just touching .................................................... 0.8

F. STORAGE STABILITY IN PARTIALLY FULL CONTAINER. Determine skinning after 48 hours in accordance with Federal Test Method Std. 141C, Method 3021.1, except use a 3/4 filled 1 pint,

Attachment


multiple friction-top can. Then reseal and store for 14 days at 120 F. Check for compliance with II.C.2.

G. EXPOSURE TEST. Three 6" X 12" panels shall be prepared using smooth-sanded, clear, yellow pine prepared as in ASTM D 358 and three 6" X 12" masonry panels overnon-asbestos fibered board prepared as in ASTM D 1734 modified to substrate size. Application shall be by brushing only, and shall follow the manufacturer's label instructions as closely as possible. Any primer or other product which is recommended by the manufacturer for use in preparing the surface for application of the test sample shall be furnished with the sample. Check for compliance with II.C.12.

IV. METHODS OF SAMPLING, INSPECTION AND OTHER TESTS:

A. SAMPLING. At the option of the purchaser, representative samples shall be taken from deliveries made under this invitation and submitted for quality control testing. If the purchaser's sample fails, the manufacturer shall pay for the actual cost of testing. Failure of any sample so taken to comply with the specification requirements shall invalidate any purchase contract made under this invitation unless the manufacturer requests a repeat quality control test. This second sample shall be from the same batch. The manufacturer shall also pay for the second quality control test should the sample fail, and this invalidates any purchase contract made under this invitation. If the second sample passes, the manufacturer is not responsible for paying the actual cost of the test, and results obtained from the second quality control test shall prevail.

B. INSPECTION. Physical inspection of package, condition, quantity, and labeling shall be made at point of delivery by the purchaser. MSDS shall be submitted with each shipment in accordance with the Florida Right-to-Know Law, Chapter 442, Florida Statutes, and shall be identical to the MSDS supplied for initial certification.

C. OTHER TESTS.

1. WORKING PROPERTIES. Take two 1-foot square gypsum wall board panels conforming to SS-L-

30 or LLL-B-1188. On the first panel apply one coat of an approved MP-22 primer/sealer

spreading at a rate of 450 square feet per gallon using a 3-inch nylon brush conforming to H-

B-420, grade AA, allow to dry for 24 hours and then repeat the whole procedure this time

applying the sample paint as a top coat. On the second panel, apply a coat of an approved

MP-22 primer/sealer using a latex semi-gloss, short-nap roller with 1/4 inch pile depth and

then repeat the whole procedure this time applying the sample paint as a top coat. Allow

both panels to dry for 24 hours. The resulting dried films shall not show brush marks, laps,

sagging, or unevenness of gloss.

NOTE: TESTING TO MEET THIS SPECIFICATION DOES NOT INCLUDE AN IN-USE PERFORMANCE TEST. ALL EDUCATIONAL AGENCIES SHOULD CONSIDER AN IN-USE PERFORMANCE TEST BEFORE PURCHASING THIS PRODUCT.

ORIGINAL MP – 6 - APPROVED February 2, 1978 (by FSPMA) REVISION MP - 6.7 - EFFECTIVE June 1, 1995 REVISION MP - 6.9 - EFFECTIVE March 10, 2000 REVISION MP - 6.10 - EFFECTIVE August 15, 2005 REVISION MP - 6.11 - APPROVED on July 25, 2008

___________________________________________ PRESIDENT FLORIDA SCHOOL PLANT MANAGEMENT ASSOCIATION _______________________________________________ CHAIR FSPMA CUSTODIAL/FOOD SERVICE CHEMICAL SPECIFICATION COMMITTEE

Attachment

Page 1

MP- 14.4- PRIMER COATING, LATEX CONDITIONER FOR CHALKING EXTERIOR SURFACE


DIVISION 9 – FINISHES SECTION 09910 EXTERIOR


MP- 14.4

PRIMER COATING, LATEX CONDITIONER FOR CHALKING EXTERIOR SURFACE


A. SCOPE. This specification covers a penetrating surface conditioner to give good intercoat

adhesion between a chalked porous substrate and top coat. This material is intended only for

repainting over old weathered, free-chalking masonry surfaces. The conditioner shall apply easily

on absorbent as well as nonabsorbent surfaces and shall not show brush marks, laps, sagging, or

unevenness of gloss. This surface conditioner is not intended for a finish coat.

B. USE. The entire surface should be vigorously wire-brushed by hand or by the use of a power

tool. The surface should be pressure cleaned with a minimum of 1500 P.S.I. pressure with minimum

four and one half (4-1/2) gallons water per minute to remove all dust and chalk residue and all

foreign matter apparent and non-apparent from surface before using penetrating conditioner.

Containers shall have labels, meeting ANSI standard and giving adequate use instructions, firmly

secured to each container. Labels shall meet all federal regulation requirements of the

Occupational Safety and Health Administration (OSHA) Hazard Communication Standard in CFR

1910.1200.

C. CLASSIFICATION. The surface conditioner covered by this specification shall be of one grade and

class only.

II. REQUIREMENTS:

A. MATERIALS. The paint shall be formulated from materials as specified herein. Materials not

specified shall be selected by the supplier and shall be subject to all the provisions of this

specification. The paint shall be free from material which is known to be toxic to personnel under

normal conditions of use.

1. PIGMENT. The pigment shall consist of titanium dioxide pigment (ASTM D 476, Type II or Type

III) silica, or silicate extenders, and shading pigments as necessary to produce the desired

color as specified.

2. VEHICLE. The vehicle shall consist of an acrylic emulsion resin together with the necessary

amount of additives, water and coalescing agents.

3. RESTRICTED METALS. The paint shall comply with the latest requirements of the Federal,

Florida State, City or Local Governments for maximum allowable restricted metals content.

4. VOC COMPLIANCE. The paint shall comply with the latest requirements of the Federal, Florida

State, City or Local Governments for the maximum allowable VOC content at the time of

purchase.

Attachment

Page 2


B. QUANTITATIVE REQUIREMENTS. The paint shall conform to the quantitative requirements as specified in Table I.



1. COLOR. The color of the paint specified in the contract or purchased order shall match that

of the standard color chip. If a color other than standard is required, the color shall match

that of the color standard submitted by the purchaser with the bid.

2. STORAGE STABILITY IN A PARTIALLY FULL CONTAINER. The paint shall show no skinning after

48 hours when tested as specified in III.E. After an additional 14 days, at 120 0F, the same

sample shall show no skinning, livering, curdling, hard caking, or gummy sediment. It shall

mix readily to a homogenous state and the viscosity change shall not be greater than ± 10

K.U.


preservatives to prevent spoilage for one year.


5. ALKALI RESISTANCE. When tested as specified in III.B., a film of the conditioner shall not

show any cracking, softening or loss of adhesion. Wrinkling shall be disregarded.

CHARACTERISTICS TOLERANCE REQUIREMENTS

MINIMUM MAXIMUM

1. Pigments, % by wt. of primer

coating. 14.0 (-2) 16.0 (+2)

2. Nonvolatile vehicle, % by wt. of

vehicle.

15.0 (-2)

17.0 (+2)

3. Coarse particles and skins, % by wt.

of primer coating. -

1.0

4. Consistency, Krebs-Stormer,

shearing rate at 200 r.p.m., K.U.

70.0 (-2)

100.0 (+2)

5. Drying times:

a. Set-to-touch, hours

b. Dry hard, hours

- -

0.75 (3/4 hr.)

2.0 - 4.0

6. Fineness of grind, N.S. 4.0 (-1)

-

7. Weight per gallon, lbs. 9.2 (-0.2)

-

8. Titanium dioxide pigment, Type II

or Type III, % by wt. of extracted

pigment. 7.0 (-1) -

Attachment

Page 3


6. MATERIAL SAFETY DATA SHEET (MSDS). An MSDS clearly identifying this product, filled out

completely according to the Florida Right-to-Know Law, Chapter 442, Florida Statutes, MUST

BE submitted with each sample submitted for certification.

7. CONDITION IN CONTAINER. The paint, when tested as specified in Table II, shall be free from

grit, seeds, skins, lumps, and livering, and shall show no more pigment settling or caking

than can be reincorporated into a smooth homogenous state. In a freshly opened container,

there shall be no rusting of the container.

8. FUNGUS PROPERTIES. The paint shall contain no mercury, but shall contain fungicidal

protection equivalent to 0.1% mercury as metal by total weight of paint.

9. FLEXIBILITY. When tested as specified in III.C., there shall be no cracking, chipping, or

flaking.

10. RESISTANCE TO LIFTING. The conditioner shall show no evidence of being lifted when a top

coat is applied when tested as specified in III.D.


The failure of any test in this section shall constitute a failure of the product to conform to the

specification.

Unless otherwise noted, all test methods cited are the latest published revision.

A. PHYSICAL AND CHEMICAL PROPERTIES. The following tests shall be conducted in accordance

with the methods as specified in Table II.

TABLE II. TESTS AND METHODS

TEST METHODS

Condition in container FTM Std. 141C, Meth. 3011.2

Skinning FTM Std. 141C, Meth. 3021.1 Pigment content

ASTM D 2371

Nonvolatile vehicle content ASTM D 2369

Coarse particles and skins

FTM Std. 141C, Meth. 4092.1

Consistency, Krebs-Stormer

ASTM D 562 Drying time: Set-to-touch

ASTM D 1640

Drying time: Dry hard

ASTM D 1640 Fineness of grind

ASTM D 1210

Weight per gallon

ASTM D 1475 Titanium dioxide pigment content ASTM D 1394

Note: The manufacturer must certify this product will provide good intercoat adhesion

between a chalked porous substrata and subsequently applied topcoats when applied in

accordance with manufacturer's directions.

B. ALKALI RESISTANCE. Immerse a solvent clean, dry test tube in a 400 ml. beaker containing 4

inches of well-mixed conditioner for 5 seconds. Withdraw and suspend the tube in the same

Attachment

Page 4


position as withdrawn and allow to dry at room temperature for 72 hours. Care must be

exercised that the adhering film is not rubbed off. Immerse the coated portion of the test tube

for 30 minutes in a 350 ml. beaker containing 125 ml. of 2 percent sodium hydroxide solution

maintained at 25C. Remove the test tube and allow to dry for 2 hours. Examine the adhering

material for compliance with II.C.5.

C. FLEXIBILITY. Draw down a film of the conditioner with a 0.002 inch doctor blade

(approximately 0.004 inch cap clearance) on tin panels (prepared for FTMS 141C Method

2012.2). Air dry for 48 hours at 25C. and 50% relative humidity and bend rapidly over a 1/8

inch mandrel. Examine for compliance with II.C.9. as in FTMS 141C, method 6221.

D. RESISTANCE TO LIFTING. Brush a coat of the primer conditioner, approximately 1 mil wet film

thickness, on a clean steel panels (prepared by FTMS 141C, Method 2011.2), allow to dry at

room temperature for 24 hours. Brush a thin coat, approximately 1 mil wet film thickness of

exterior enamel conforming to MP-5 over the dried conditioner of film. While brushing observe

for lifting. Allow the primer to dry at room temperature for 48 hours and then examine for

compliance with II.C.10.

E. STORAGE STABILITY IN PARTIALLY FULL CONTAINER. Determine skinning after 48 hours in

accordance with Federal Test Method Std. 141C, method 3021.1, except use a 3/4 filled 1 pint,

multiple friction-top can. Then reseal and store for 14 days at 120 F. Check for compliance

with II.C.2.

IV. METHODS OF SAMPLING, INSPECTION, AND OTHER TESTS:

A. SAMPLING. At the option of the purchaser, representative samples shall be taken from

deliveries made under this invitation and submitted for quality control testing. If the

purchaser's sample fails, the manufacturer shall pay for the actual cost of testing. Failure of

any sample so taken to comply with the specification requirements shall invalidate any

purchase contract made under this invitation unless the manufacturer requests a repeat

quality control test. This second sample shall be from the same batch. The manufacturer shall

pay for the second quality control test should the sample fail, and this invalidates any

purchase contract made under this invalidates. If the second sample passes, the manufacturer

is not responsible for paying the actual cost of the test, and results obtained from the second

quality control test shall prevail.

B. INSPECTION. Physical inspection of package, condition, quantity, and labeling shall be made at

point of delivery by the purchaser. MSDS shall be submitted with each shipment in accordance

with the Florida Right-to-Know Law, Chapter 442, Florida Statutes, and shall be identical to

the MSDS supplied for initial certification.

C. OTHER TESTS.

1. WORKING PROPERTIES. Take two 1-foot square gypsum wall board panels conforming to SS-L-

30 or LLL-B-1188. On the first panel apply one coat of the pigmented conditioner sample

spreading at a rate of 450 square feet per gallon using a 3-inch nylon brush conforming to H-

B-420, grade AA, allow to dry for 24 hours and then repeat the whole procedure this time

applying an MP-28 approved paint as a top coat. On the second panel, apply a coat of the

Attachment

Page 5


pigmented conditioner sample using a latex semi-gloss, short-nap roller with 1/4 inch pile

depth and then repeat the whole procedure this time with an MP-28 approved paint as a top

coat. Allow both panels to dry for 24 hours, then examine the resulting dried films for

compliance with I.A.

2. RECOATING PROPERTIES. Recoat the dried panels prepared in IV.C.1. with the same MP-28

approved paint. Evaluate the recoating properties on both panels as applied by brush and

roller, respectively, for compliance with I.A.

NOTE: TESTING TO MEET THIS SPECIFICATION DOES NOT INCLUDE AN IN-USE PERFORMANCE

TEST. ALL EDUCATIONAL AGENCIES SHOULD CONSIDER AN IN-USE PERFORMANCE TEST BEFORE

PURCHASING THIS PRODUCE.

ORIGINAL MP-14 - APPROVED January 8, 1987 (by FSPMA)

REVISION MP-14.3 - EFFECTIVE June 1, 1995

REVISION MP-14.4 - APPROVED on July 25, 2008

____________________________________________________________________

PRESIDENT FLORIDA SCHOOL PLANT MANAGEMENT ASSOCIATION

______________________________________________________________

CHAIR FSPMA CUSTODIAL/FOOD SERVICE CHEMICAL SPECIFICATION COMMITTEE

Attachment

Page 1 MP-32.3 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS, WHITES AND TINTS


DIVISION 9 – FINISHES SECTION 09910 EXTERIOR PAINT


MP-32.3

INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS,

WHITES AND TINTS

I. SCOPE, USE AND CLASSIFICATION

A. SCOPE: The latex-base semi-gloss covered by this specification is intended for use on interior and exterior wall and ceiling surfaces such as wallboard, wall paper, wood and plaster. It may be applied to previously primed or painted wood, plaster or dry wall surfaces.

B. USE: Glossy finishes should be dulled either by sanding or by washing with a solvent-type

cleaner prior to application of the paint. All new surfaces should be primed with a primer having adequate enamel holdout. Containers shall have labels, meeting ANSI standards and giving adequate use instructions, firmly secured to each container. Labels shall meet all federal regulation requirements of the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard in CFR 1910.1200.

C. CLASSIFICATION: The paint covered by this specification shall be of the following types:

1. Type I. White. DOE certification shall be for Type I only. 2. Type II. Tints. All tinted paints supplied to purchaser must meet all requirements of

this specification, except pigment.

II. REQUIREMENTS


1. PIGMENT. Suitable lightfast and alkali resistant pigments shall be used. Extender

pigments, shading pigments, and titanium dioxide conforming to ASTM D 476, Type II or Type III, may be used when necessary to match the color desired provided the paint complies with all the requirements specified herein.

2. VEHICLE. The vehicle shall be a stable aqueous dispersion of resin prepared by emulsion

polymerization.

Attachment



4. VOC COMPLIANCE. The paint shall comply with the latest requirements of the Federal,


B. QUANTITATIVE REQUIREMENTS. The paint shall conform to the quantitative requirements

specified in Table I.


Tolerance

Requirements

Characteristic Minimum Maximum

1. Fineness of grind, N.S. 5 -

2. Drying time of enamel. a. Set-to-touch, hours. b. Dry-to-recoat, hours.

- -

2 4

3. Viscosity, K.U. 75 (-4) 110 (+5)

4. 600 specular gloss after 48 hrs. air drying*. 25 60

5. Directional reflectance, white only. 85 -

6. Dry opacity, contrast ratio, @400 sq. ft./gallon, white only

0.95 -

7. Titanium dioxide (Types II, 92% TiO2 and III, 80% TiO2) % by wt. of enamel.

17 -

*Using 3 mil wet film thickness over plate glass backed with white paper. C. QUALITATIVE REQUIREMENTS:

1. COLOR. The color of the paint specified in the contract or purchase order shall match

that of the standard color chip. If a color other than white is required, the color shall match that of the standard color chip submitted by the purchaser with the bid.

2. STORAGE STABILITY IN A PARTIALLY FULL CONTAINER. The paint shall show no skinning

after 48 hours when tested as specified in III.EG. After an additional 14 days, at 120 F., the same sample shall show no skinning, livering, curdling, hard caking, or gummy sediment. It shall mix readily to a homogenous state and the viscosity change shall not be greater than ± 10 K.U.


preservatives to prevent spoilage for one year.


Attachment


5. SCRUBBABILITY. When tested as specified in III.F., the paint film shall not be worn through to the test panel after 400 cycles (800 separate strokes) of the sponge.

6. ALKALI RESISTANCE. The paint film, tested as in III.B., shall show no change in hue and

not more than very slight changes in reflectance and gloss. There shall be no evidence of blistering, softening, or wrinkling.

7. MATERIAL SAFETY DATA SHEET (MSDS). An MSDS clearly identifying this product, filled

out completely according to the Florida Right-to-Know Law, Chapter 442, Florida Statutes, MUST BE submitted with each sample submitted for certification.

8. CONDITION IN CONTAINER. The paint, when tested as specified in Table II, shall be free

from grit, seeds, skins, lumps, and livering, and shall show no more pigment settling or caking than can be reincorporated into a smooth homogenous state. In a freshly opened container, there shall be no rusting of the container.

9. FLEXIBILITY. When tested as in III.C., there shall be no cracking, chipping, or flaking.

10. SAG RESISTANCE. The paint shall have a minimum anti-sag index of 7.0 when tested as

in III.D.

III. TEST PROCEDURES FOR LABORATORY ANALYSIS

The failure of any test in this section shall constitute a failure of the product to conform to the specification. Unless otherwise noted, all test methods cited are the latest published revisions.

A. PHYSICAL AND CHEMICAL PROPERTIES. The following tests shall be conducted in accordance

with the methods as specified in Table II.

TABLE II. TEST AND METHODS

Test Methods

1. Condition in container. FTM Std. 141C, Meth. 3011.2

2. Skinning. FTM Std. 141C, Meth. 3021.1

3. Fineness of grind. ASTM D 1210

4. Drying time: set-to touch,hard to recoat. ASTM D 1640

5. Consistency, Krebs-Stormer. ASTM D 562

6. 600 specular gloss. ASTM D 523

7. Directional reflectance. ASTM E 97

8. Dry opacity. ASTM D 2805

9. Scrub resistance. ASTM D 2486

10. Analysis of TiO2 pigment.

ASTM D 1394, Aluminum Reduction Method (Not

currently tested by M-DCPS)

11. Adhesion test* ASTM D 4541

*ADHESION TEST - 100 lbs./sq. in. minimum when tested on a film prepared according to MP-6.7, III, B, 1, with two weeks curing time (Revised from ASTM D 3359 Method A & B per committee vote on

Attachment


3/10/2000). Prepare test panels using a currently approved product for MP-5 as the aged gloss alkyd enamel undercoat, allowing a 7 day aging period at 120 0F prior to applying the test paint.

B. ALKALI RESISTANCE. Prepare specimens for testing by using a 6-inch by 17-inch by 1/4 inch plain plate glass with a ground surface which has been cleaned as in Method 2012.1 of Federal Test Method Standards No. 141C. Apply enamel with suitable applicator obtaining a dry film thickness of 3.0 (±0.3) mil and a width of 5-1/2 inches. Allow enamel to dry in a horizontal position for 120 hours at 77 (±3)F and 50 (±5)% relative humidity. Place 5 drops of 2% by weight aqueous sodium hydroxide solution on the paint and immediately cover the surface with a 50 mm watchglass. After 2 hours, remove the watchglass, wash off the solution. Allow 2 hours for recovery and examine for compliance with II.C.67.

C. FLEXIBILITY. Prepare the test panel in accordance with Method 2012.2 of Federal Test Method Standard No. 141C. Supplement the test panel cleaning procedure with an additional cleaning with abrasive soap (such as Bon Ami or equal) so that the entire surface of the panel is wet. Apply the paint in accordance with Method 2162 of Federal Test Method Standard No. 141C on the clean, dry panel with a 0.003 inch (approximately 0.0060 inch gap clearance) Bird film applicator or similar blade which produces the same film thickness. Air dry for 18 hours, bake for 3 hours at 105 (±2) F, then cool for 1/2 hour. Bend over a 1/8 inch mandrel and examine in accordance with Method 6221 of Federal Test Method Standard No. 141C for compliance with II.C.10.

D. SAG RESISTANCE. Mount a sealed Morest or Leneta test chart on a vacuum plate of an

automatic film applicator. Set the Leneta Anti-Sag Meter at the top of the test chart with the open side of the blade facing the operator. Place a suitable quantity of the paint directly in front of the blade, and draw down the paint. The completed draw down shall then be immediately removed from the automatic film applicator and placed in a vertical position with the stripes horizontal and the thinnest stripe at the top. Allow to dry at room temperature in this position and then determine the Anti-Sag Index as follows:

The lowest (heaviest film thickness) stripe which does not touch the next lower stripe is the Index Stripe. Fractional values are obtained by adding to the index value fractional values based on the degree to which the stripe below the index stripe has merged with the next stripe as follows: DEGREE OF MERGER ADD Complete (intervening block is completely wetted) 0.0 Not complete, but definitely more than half 0.2 Approximately half 0.4 Appreciable, but definitely less than half 0.6 Slight, just touching 0.8

E. STORAGE STABILITY IN PARTIALLY FULL CONTAINER. Determine skinning after 48 hours in accordance with Federal Test Method Std. 141C, Method 3021.1, except use a 3/4 filled pint, multiple friction-top can. Check for compliance with II.C.1.

F. SCRUB RESISTANCE. In compliance with ASTM 2486.

G. ADHESION - 1. Specimen Preparation: Prepare specimens for testing by using a 6” X 12” steel Q panel

with a ground surface which has been cleaned as in Method 2011.1 (Revised from 20112.2 on 3/24/2000) of Fed. Test Method Std. No. 141C. Apply alkyd enamel

Attachment


conforming to MP-5 by a draw-down with suitable applicator obtaining a dry film thickness of 3.0 (±0.3) mil and a width of 5-1/2 inches. Allow the alkyd enamel to dry in a horizontal position for 3 days at 77 (±3)0F. and 50(±5)% relative humidity, then bake for a 7-day aging period at 120 0F prior to applying the test paint. Apply the test paint by draw-down as above in a direction perpendicular to the long axis of the panel to obtain a dry film of 2.0(±0.2) mils thickness and a width of approximately 2 inches. Allow the test paint to cure for two weeks at room temperature before conducting the adhesion test.

2. Adhesion Test: The test should be conducted using the PATTI Adhesion Tester following ASTM D 4541.

3. Acceptance Criteria: 100 lbs./sq. in. Minimum.

IV. METHODS OF SAMPLING, INSPECTION AND OTHER TESTS A. SAMPLING: At the option of the purchaser, representative samples shall be taken from

deliveries made under this invitation and submitted for quality control testing. If the purchaser's sample fails, the manufacturer shall pay for the actual cost of testing. Failure of any sample so taken to comply with the specification requirements shall invalidate any purchase contract made under this invitation unless the manufacturer requests a repeat quality control test. This second sample shall be from the same batch. The manufacturer shall pay for the second quality control test should the sample fail, and this invalidates any purchase contract made under this invalidates. If the second sample passes, the manufacturer is not responsible for paying the actual cost of the test, and results obtained from the second quality control test shall prevail.

B. INSPECTION: Physical inspection of package, condition, quantity, and labeling shall be

made at point of delivery by the purchaser. MSDS shall be submitted with each shipment in accordance with the Florida Right-to-Know Law, Chapter 442, Florida Statutes, and shall be identical to the MSDS supplied for initial certification.

NOTE: TESTING TO MEET THIS SPECIFICATION DOES NOT INCLUDE AN IN-USE PERFORMANCE TEST. ALL EDUCATIONAL AGENCIES SHOULD CONSIDER AN IN-USE PERFORMANCE TEST BEFORE PURCHASING THIS PRODUCT. ORIGINAL MP-32 - APPROVED October 29, 1991 REVISION MP-32.1 - EFFECTIVE June 1, 1991 REVISION MP-32.2 - EFFECTIVE March 10, 2000 REVISION MP-32.3 - APPROVED on July 25, 2008

________________________________________________ PRESIDENT FLORIDA SCHOOL PLANT MANAGEMENT ASSOCIATION ________________________________________________ CHAIR FSPMA PAINT SPECIFICATIONS COMMITTEE

Attachment

Page 1

MP-38.3 EXTERIOR/INTERIOR, ALKALI RESISTANT-STAIN BLOCK UNIVERSAL PRIMER/SEALER, ACRYLIC-BASE


DIVISION 9 – FINISHES

SECTION 09910 EXTERIOR PAINT


MP-38.3

EXTERIOR/INTERIOR, ALKALI RESISTANT-STAIN BLOCK UNIVERSAL PRIMER/SEALER,

ACRYLIC-BASE


A. SCOPE: This specification covers a quick drying water based acrylic undercoater for priming and sealing most surfaces including alkali. Formulated with exceptional adhesion, it adheres to glossy surfaces, wood, masonry, plaster, wall board, cement, brick, stucco, cement composition board (including alkali), galvanized metal, and surfaces with potential staining such as water, smoke, ink, markers, and tannins. It is not recommended for use on ferrous metals.

B. USE: Containers shall have labels, meeting ANSI standards and giving adequate

use instructions, firmly secured to each container. Labels shall meet all federal regulation requirements of the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard in CFR 1910.1200.

C. CLASSIFICATION: The paint covered by this specification is a latex primer.

II. REQUIREMENTS


1. PIGMENT. Pigmented with a durable exterior grade of titanium dioxide, and

extender pigments to obtain good hiding and chemical resistance. 2. VEHICLE. The vehicle shall consist of a latex emulsion with necessary additions of

miscellaneous additives.


4. VOC COMPLIANCE. The paint shall comply with the latest requirements of the

Federal, Florida State, City or Local Governments for the maximum allowable VOC content at the time of purchase. Such compliance shall be stated on the MSDS and container clearly identifying the product.

Attachment

Page 2


B. QUANTITATIVE REQUIREMENTS. The paint shall conform to the quantitative requirements as specified in Table I.


Tolerance

Requirements

Characteristic Minimum Maximum

1. Total solids, % by wt. of primer. 45 (-2) -

2. Titanium dioxide, % by wt. of primer. 9 -

3. Non-volatile vehicle, % by wt. of primer. 17 -

4. Krebs-Stormer Viscosity, K.U. 85 (-3) 108

5. Drying time: a. Set-to touch, hours. b. Stain-resistance recoat, hours.

- 4

1 -

C. QUALITATIVE REQUIREMENTS:

1. COLOR. The color of the paint specified in the contract or purchase order shall

match that of the standard color chip. 2. CONDITION IN CONTAINER. The paint, when tested as specified in Table II, shall be

free from grit, seeds, skins, lumps, and livering, and shall show no more pigment settling or caking than can be reincorporated into a smooth homogenous state. In a freshly opened container, there shall be no rusting of the container.


preservatives to prevent spoilage for one year. 4. APPEARANCE OF DRIED PAINT. When applied by brushing or rolling, the paint shall

dry to a smooth, uniform finish, free from craters and other defects caused by bubble retention. There shall be no "shiners", no flashing, no streaking or conspicuous laps, nor any objectionable brush marks.

5. ODOR. The odor shall not be putrid during or after application. 6. MATERIAL SAFETY DATA SHEET (MSDS). An MSDS clearly identifying this product,

filled out completely according to the Florida Right-to-Know Law, Chapter 442, Florida Statutes, MUST BE submitted with each sample submitted for certification.

7. STORAGE STABILITY IN A PARTIALLY FULL CONTAINER. The paint shall show no

skinning after 48 hours when tested as specified in III.B. After an additional 14 days at 120F., the same sample shall show no skinning, livering, curdling, hard caking, or gummy sediment. It shall mix readily to a homogenous state and the viscosity change shall not be greater than 10 K.U.

8. ALKALI RESISTANCE. The paint film, tested as in IV.C.1., shall show no evidence of

blistering, loss of adhesion, cracking or flaking.

Attachment

Page 3




A. PHYSICAL AND CHEMICAL PROPERTIES. The following tests shall be conducted in

accordance with the methods specified in Table II.


Test Methods

12. Total Solids, % by wt. of primer. ASTM D 2369

13. Consistency, Krebs-Stormer. ASTM D 562

14. Storage stability in partially full container. FTM Std. 141C, Meth. 3021.1

15. Adhesion test* ASTM D 3359, Meth. A

16. Adhesion test** ASTM D 3359, Meth. B

17. Condition in container. FTM Std. 141C, Meth. 3011.2

18. Nonvolatile Vehicle, % by wt. of primer. FTM. Std.141C, Meth. 4053.1

19. Drying time. ASTM D 1640

20. Stain block III.C.

*ADHESION TEST - Method ASTM D 3359 A, X cut tape method, evaluated over aged gloss alkyd = 5A rating **ADHESION TEST - Method ASTM D 3359 B, Cross-cut method, evaluate over aged gloss alkyd = 5B rating

B. STORAGE STABILITY IN PARTIALLY FULL CONTAINER. Determine skinning after 48 hours in

accordance with Federal Test Method Standard No. 141C, Method 3021.1, except use a 3/4 filled pint, multiple friction top can. Then reseal and store for 14 days at 120 F. Check for compliance with II.C.7.

C. STAIN BLOCK TEST. To A 8” x ?” glass panel surface shall be uniformly coated with a paint brand certified under either MP-2.9 –‘Acrylic-Base, Exterior, Flat, White and Tints’ or MP-26.4 –‘Acrylic-Base, Gloss Enamel, Direct-To-Metal, White and Tints’ (dried and allowed to dry for 1 week minimum, apply before applying parallel lines at least 1/8 inch wide of each of the markers/pencils/pens listed below:

1. Black -- Mark-A-Lot (broad tip) Dennison 2. Blue -- Mark-A-Lot (broad tip) Dennison 3. Green -- Mark-A-Lot (broad tip) Dennison 4. Red -- Mark-A-Lot (broad tip) Dennison 5. Brown -- Sharpie (Permanent Markers) Sanford 6. Blue -- Sharpie (Permanent Markers) Sanford 7. Green -- Sharpie (Permanent Markers) Sanford 8. Red -- Sharpie (Permanent Markers) Sanford

Attachment

Page 4


9. Black -- Precise Very Fine Pen Pilot 10. Blue -- Medium Ballpoint Papermate 11. Red -- Precise Very Fine Pilot 12. Pencil-- No. 2

The lines shall be allowed to dry a minimum of 4 hours and apply before applying two 3 mil drawdowns (bird applicator) of the test primer over 75% of the stained area. Allow The primer shall be allowed to dry for a minimum of 4 hours for each drawdown and apply before applying two 3 mil drawdowns of a top coat which shall be a paint brand certified under MP-1.8 over at least 75% of the primed area. The wet finished panel will show (1) lines with no coating, (2) lines with primer (MP-38) only, and (3) lines with primer (MP-38) and topcoat (MP-1) applications.

After allowing the top coat applications to dry for 24 hours, a visual comparative evaluation of which individual lines/stains are showing through the primer and top coat applications as well as of their intensity will be conducted using as a standard reference the resulting glass panel obtained for the INSL-X/Coronado Paints ‘Grip & Seal Latex Stain Killer 116-11 (MT&E Lab # P2546) and the sample results shall be equal or better than those obtained for the standard reference material. Pass/fail will be made after 24 hr. dry of topcoat for stains showing through. (Revised to require two 3 mil coats of test primer and top coat.)

IV. METHODS OF SAMPLING, INSPECTION AND OTHER TESTS

A. SAMPLING: At the option of the purchaser, representative samples shall be taken

from deliveries made under this invitation and submitted for quality control testing. If the purchaser's sample fails, the manufacturer shall pay for the actual cost of testing. Failure of any sample so taken to comply with the specification requirements shall invalidate any purchase contract made under this invitation unless the manufacturer requests a repeat quality control test. This second sample shall be from the same batch. The manufacturer shall pay for the second quality control test should the sample fail, and this invalidates any purchase contract made under this invalidates. If the second sample passes, the manufacturer is not responsible for paying the actual cost of the test, and results obtained from the second quality control test shall prevail.

B. INSPECTION: Physical inspection of package, condition, quantity, and labeling

shall be made at point of delivery by the purchaser. MSDS shall be submitted with each shipment in accordance with the Florida Right-to-Know Law, Chapter 442, Florida Statutes, and shall be identical to the MSDS supplied for initial certification.

C. OTHER TESTS.

ALKALI RESISTANCE. Prepare concrete panels form a mix of 1 part of type 1 Portland cement and 1 part of graded Ottawa silica sand. Mix thoroughly with water to obtain a trowelling consistency and cast into panels measuring (76 X 76 X 13mm). The top surface of the panel to be coated shall be trowelled smooth. Allow the panel to cure for 1 week and immediately apply the paint at a spreading rate of 100 sq. ft. per gallon. Allow to cure for 24 hours. Immerse the test panels into water to such depths as to have the prepared surface about 4mm above the surface of the water for 28 days. Remove, let dry for 2 hours, and immediately examine for compliance with II.C.8.

Attachment

Page 5



ORIGINAL MP-38.0 - APPROVED October 22, 1996 REVISION MP-38.1 - Committee voted on 2/12/02 to change the stain block test from one 3 mil coat of test primer and top coat of MP 1.8 to two 3 mil coats of each. REVISION MP-38.2 – Committee voted on 5/17/07 to change the FSPMA certification requirement of the base used for the stain block test from MP-1.8 to either MP-2.9 or MP-26.4. REVISION MP-38.3 – APPROVED on July 25th, 2008.


Attachment

Page 1 MP-44.2 ACRYLIC BASE INTERIOR TEXTURED COATING AGGREGATE AND NON-AGGREGATE


DIVISION 9 - FINISHES SECTION 09920 INTERIOR COATING


MP-44.2

ACRYLIC BASE INTERIOR TEXTURED COATING

AGGREGATE AND NON-AGGREGATE


A. SCOPE: This specification covers a acrylic-based texture coating intended for use on INTERIOR wall and ceiling surfaces such as wallboard, primed wood, primed metal, plaster, stucco and masonry. It may be applied to previously primed wood, plaster, masonry or dry wall; surfaces that have been properly prepared. The texture system is excellent for use in classrooms, cafeteria, corridors, etc. The texture provides excellent abuse-resistance, mold and mildew resistance while covering unsightly appearance of surface imperfections.

B. USE: Glossy finishes should be dulled either by sanding or abrading prior to application

of the texture. All new surfaces should be primed with a primer with mildew and algae resistant agents. Containers shall have labels, giving adequate use instructions, firmly secured to each container. Labels shall meet all federal regulation requirements of the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard in CFR 1910.1200.

C. CLASSIFICATION: The texture covered by this specification shall be of the following

types:

1. Type I. Aggregate. 2. Type II. Non-Aggregate.

All tinted textures supplied to purchaser must meet all requirements of this specification, except pigment.

II. REQUIREMENTS

A. MATERIALS The texture shall be formulated from materials as specified herein. Materials not specified shall be selected by the supplier and shall be subject to all the provisions of this specification. The texture shall be free from material which is known to be toxic to personnel under normal conditions.

1. PIGMENT. Suitable light-fast and alkali resistant pigments shall be used. 2. VEHICLE. The vehicle shall be a mechanically stable aqueous dispersion of resin

prepared by emulsion polymerization with the end result being a acrylic polymer or styrene acrylic co-polymer with excellent performance characteristics.

Attachment


3. RESTRICTED METALS: The texture shall comply with the latest requirements of the Federal, Florida State, City or Local Governments for maximum allowable restricted metals content.

4. VOC COMPLIANCE. The texture shall comply with the latest of the Federal, Florida

State, City or Local Governments for maximum allowable VOC content at the time of purchase.

B. QUANTITATIVE REQUIREMENTS. The paint shall conform to the quantitative

requirements as specified in Table I.


Tolerance

Requirements

Characteristic (Type II, White Only) Minimum Maximum

1. Dry time: Set-to-Touch, hours 2 4

2. Dry-to-Recoat, hours 2 6

3. Consistency, KU. > 100

4. Pencil Hardness > 5H

5. *Flame Spread ASTM E-84 - 9.0

6. *Smoke Contribution ASTM E-84 - 8.0

7. *Water Vapor Permeability @ 10 mils ASTM D1653 Dry Cup

25 -

8. *Resistance to Growth of Mold ASTM D-3273 - 0

9. Scrub Resistance ASTM D-2486, cycles 2200

*Vendor must submit independent laboratory test data indicating with F.S.P.M.A. requirement.

C. QUALITATIVE REQUIREMENTS: 1. COLOR. The color of the texture specified in the contract or purchase order shall

match that of the standard color chip. If a color other than white is required, the color shall match that of the standard color chip submitted by the purchaser with the bid.

2. CONDITION IN CONTAINER. The texture, when tested as specified in Table II, shall

be free from extraneous material and shall show no more pigment settling or caking than can be reincorporated into a smooth homogenous state. In a freshly opened container, there shall be no rusting of the container.

3. STORAGE STABILITY IN A PARTIALLY FULL CONTAINER. The texture shall show no

skinning after 48 hours when tested a specified in III C. After an additional 14 days, at 120° F., the same sample shall show no skinning, livering, curdling, or gummy sediment. It shall mix readily to a homogenous state. The addition of up to 12 gallon of water per 5 gallons of texture is permissible.

4. STORAGE STABILITY IN UN-OPENED CONTAINER. All containers shall have sufficient

preservatives to prevent spoilage for one year. 5. ODOR. The odor shall not be putrid during or after application.

Attachment


6. ALKALI RESISTANCE: The dry texture, tested as in III. B., shall show no change in

hue and no evidence of blistering softening or cracking.

7. MATERIAL SAFETY DATA SHEET (MSDS). An MSDS clearly identifying this product,


8. SCRUB RESISTANCE. Use ASTM D-2486 Test Method as listed in Table II except that

a synthetic sponge (cut to fit the holder), conforming to FED. Spec. L-S-626, Type II, porosity B, is used in lieu of the nylon bristle brush; and 50 ml. of water is used instead of 5 ml. Check for compliance with acceptance criteria listed in Table I.




accordance with the methods specified in Table II.


Test Methods

21. Condition in container FTM Std. 141 C, Method 3011.2

22. Skinning FTM Std. 141 C, Method 3012.1

23. Drying time: Set-to-Touch ASTM D-1640

24. Drying time: Dry hard ASTM D-1640

25. Viscosity, Krebs-Stormer ASTM D-562

26. Pencil Hardness ASTM D-3363

27. Scrub Resistance ASTM D-2486

Material Quality for Testing: Finished and Fully Cured 28 days.

B. ALKALI RESISTANCE. Prepare specimens for testing by using a 6-inch by 17-inch by 1/4 inch plain plate glass with a ground surface which has been cleaned as in Method 2012.1 of federal Test Method Standard No. 141 C. Apply texture with suitable applicator obtaining a dry film thickness of 20.0 (±2) mil and a width of 5 inches. Allow texture to dry in a horizontal position for 120 hours at 77 (±3) 0F and 50 (±5) % relative humidity. Place 5 drops of 2% by weight aqueous sodium hydroxide solution on the texture and immediately cover the surface with a 50 mm watch-glass. After 2 hours, remove the watch-glass, wash off the solution. Allow 2 hours for recovery and examine for compliance with II.C.6.

C. STORAGE STABILITY IN PARTIALLY FULL CONTAINER. Determine skinning after 48 hours

in accordance with Federal Test Method Standard 141 C, Method 30/1.1, except use a 3/4 filled 1 pint, multiple friction-top can. Then reseal and store for 14 days at 120°F. Check for compliance with II C.3.

IV. METHODS OF SAMPLING, INSPECTION AND OTHER TESTS

Attachment


A. SAMPLING: At the option of the purchaser, representative samples shall be taken from deliveries made under this invitation and submitted for quality control testing. If the purchaser's sample fails, the manufacturer shall pay for the actual cost of testing. Failure of any sample so taken to comply with the specification requirements shall invalidate any purchase contract made under this invitation unless the manufacturer requests a repeat quality control test. This second sample shall be from the same batch. The manufacturer shall pay for the second quality control test should the sample fail, and this invalidates any purchase contract made under this invalidates. If the second sample passes, the manufacturer is not responsible for paying the actual cost of the test, and results obtained from the second quality control test shall prevail.

B. INSPECTION: Physical inspection of package, condition, quantity, and labeling shall be



ORIGINAL MP-44.0 - APPROVED on February 4, 2004 REVISION MP-44.1 - APPROVED on February 15, 2008 REVISION MP-44.2 - APPROVED on July 25, 2008


Attachment

Page 1 MP- 56.2 ELASTOMERIC ROOF PAINT




MP- 56.2

ELASTOMERIC ROOF PAINT


A. SCOPE. This specification covers a high-solids, 100% acrylic resin-based, water-borne, flexible roof coating designed to perform on horizontal masonry surfaces that may experience intermittent ponding water.

B. USE. This product can be used over prepared stucco, as well as all normally used

roofing materials such as properly prepared and primed metal. Containers shall have labels, meeting ANSI standard and giving adequate use instructions, firmly secure to each container. Labels shall meet all federal regulation requirements of the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard in CFR 1910.1200.

C. CLASSIFICATION. There will be two types of coatings covered by this specification:

Type A – ‘Regular Roof Coating’: The product should be able to achieve an applied spread rate of 80-100 sqft per gallon when applied at 10 mils DFT (dry film thickness). Type B – ‘High-Build Roof Coating’: The product should be able to achieve an applied spread rate of 50 sqft per gallon when applied at 20 mils DFT (dry film thickness) each coat. Two coats need to achieve a total DFT of 40 mils.

II. REQUIREMENTS:

A. MATERIALS. The coating shall be formulated from materials as specified herein.

Materials not specified shall be selected by the supplier and shall be subject to all the provisions of this specification. The coating shall be free from material which is known to be toxic to personnel under normal conditions of use.

1. VEHICLE. The vehicle shall consist of a 100% flexible acrylic copolymer resin with

modifiers.

2. RESTRICTED METALS. The coating shall comply with the latest requirements of the Federal, Florida State, City or Local Governments for maximum allowable restricted metals content.

3. VOC COMPLIANCE. The coating shall comply with the latest requirements of the

Federal, Florida State, City or Local Governments for the maximum allowable VOC content at the time of purchase.

B. QUANTITATIVE REQUIREMENTS. The coating shall conform to the quantitative

requirements as specified in Table I.

Attachment




CHARACTERISTICS MINIMUM MAXIMUM

1. Total Solids (% by Weight) 50 -

2. Directional reflectance, 45- 0, White only (%).

88

-

3. Consistency (Viscosity,K.U.) 105 125

4. Drying Time (hr) i. to touch ii. to recoat

12

2

5. Weight per gallon (lb) 11.0 12.0

6. Dry heat resistance (0F) 190 -

6. Tensile strength @ room temp (psi)

150 -

7. Elongation @ room Temp (%) @ Break

200

480 300

8. Dry Opacity/Contrast Ratio: a) Type A: 10 mils DFT b) Type B: 20 mils DFT

1.00 1.00

- -

9. Permeability-Dry Cup Method (perms) a) Type A: @ 10 mils DFT b) Type B: @ 20 mils DFT

6 6

- -


1. COLOR. This coating shall be white or stock factory ground in colors.. 2. STORAGE STABILITY IN A PARTIALLY FULL CONTAINER. The paint shall show no

skinning after 48 hours when tested as specified in III.C. After an additional 14 days, at 120 0F., the same sample shall show no skinning, livering, curdling, hard caking, or gummy sediment. It shall mix readily to a homogenous state and the viscosity change shall not be greater than ± 10 K.U.


preservatives to prevent spoilage for two years. 4. ODOR. The odor shall not be putrid during or after application. 5. ALKALI RESISTANCE. When tested as specified in III.A., a film of the coating shall

not show any cracking, softening or loss of adhesion. Wrinkling shall be disregarded.

6. MATERIAL SAFETY DATA SHEET (MSDS). An MSDS clearly identifying this product,


7. CONDITION IN CONTAINER. The coating when tested as specified in Table II, shall

be free from grit, seeds, skins, lumps, and livering, and shall show no more pigment settling or caking than can be reincorporated into a smooth homogenous state. In a freshly opened container, there shall be no rusting on the container.

mailto:strength@room

Attachment


8. FLEXIBILITY. When tested as specified in III.B., there shall be no cracking, chipping, or flaking.


The failure of any test in this section shall constitute a failure of the product to conform to the specification.

Unless otherwise noted, all test methods cited are the latest published revision. PHYSICAL AND CHEMICAL PROPERTIES. The following tests shall be conducted in accordance with the methods as specified in Table II.


TEST METHODS

Condition in container FTM Std. 141C, Meth. 3011.2

Permeability* ASTM D 1653 (Dry Cup Method)

Directional reflectance, 45-0 ASTM E 97

Nonvolatile content ASTM D 2369

Consistency, Krebs-Stormer ASTM D 562

Drying time (Set-to-touch & Dry hard) ASTM D 1640

Dry Opacity/Contrast Ratio ASTM D 2805

Weight per gallon ASTM D 1475

Dry Heat Resistance* ASTM D2485, Method A

Tensile Strength* ASTM D2370

Elongation* ASTM D2370

*A letter of certification from independent testing laboratory must be submitted reporting the tensile strength, elongation at break, and permeability, and dry heat resistance in accordance with stated test methods.

A. ALKALI RESISTANCE. Immerse a solvent clean, dry test tube in a 400 ml beaker

containing 4 inches of well-mixed coating for 5 seconds. Withdraw and suspend the tube in the same position as withdrawn and allow to dry at room temperature for 72 hours. Care must be exercised that the adhering film is not rubbed off. Immerse the coated portion of the test tube for 30 minutes in a 350 ml beaker containing 125 ml of 2 % sodium hydroxide solution maintained at 25 0C. Remove the test tube and allow to dry for 2 hours. Examine the adhering material for compliance with II.C.5.

B. FLEXIBILITY. Draw down a film of the coating with a 0.002 inch doctor blade

(approximately 0.004 inch cap clearance) on tin panels (prepared for FTMS 141C Method 2012.2). Air dry for 48 hours 25 0C and 50% relative humidity and bend rapidly over a 1/8 inch mandrel. Examine for compliance with II.C.8. as in FTMS 141C, method 6221.

Attachment


C. STORAGE STABILITY IN PARTIALLY FULL CONTAINER. Determine skinning after 48 hours accordance with Federal Test Method Std. 141C, method 3021.1, except use a ¾ filled 1 pint, multiple friction-top can. Then reseal and store for 14 days at 120 0F. Check for compliance with II.C.2.



deliveries made under this invitation and submitted for quality control testing. If the purchaser’s sample fails, the manufacturer shall pay for the actual cost of testing. Failure of any sample so taken to comply with the specification requirements shall invalidate any purchase contract made under this invitation unless the manufacturer requests a repeat quality control test. This second sample shall be from the same batch. The manufacturer shall pay for the second quality control test should the sample fail, and this invalidates any purchase contract made under this invalidate. If the second sample passes, the manufacturer is not responsible for paying the actual cost of the test, and results obtained form the second quality control test shall prevail.

B. INSPECTION. Physical inspection of package, condition, quantity, and labeling shall be


NOTE: TESTING TO MEET THIS SPECIFICATION DOES NOT INCLUDE AN IN-USE PERFORMANCE TEST. ALL EDUCATIONAL AGENCIES SHOULD CONSIDER AN IN-USE PERFORMANCE TEST BEFORE PURCHASING THIS PRODUCE.

ORIGINAL MP-56 - APPROVED on February 22, 2007. REVISION MP-56.1 - APPROVED on February 15, 2008. REVISION MP-56.2 – APPROVED on July 25, 2008 ________________________________________________ PRESIDENT FLORIDA SCHOOL PLANT MANAGEMENT ASSOCIATION ________________________________________________ CHAIR FSPMA PAINT SPECIFICATIONS COMMITTEE

Attachment

Page 1 MP- 57.0 AGRICULTURAL OIL-BASED ROOF COATING (SEALER)




MP-57

AGRICULTURAL OIL-BASED ROOF COATING (SEALER) I. SCOPE, USE AND CLASSIFICATION:

A. SCOPE. This specification covers high-solids, biobased, reflective, water-proof, flexible roof coatings designed to perform on low slope and horizontal roof surfaces that may experience permanent ponding water.

B. USE. These products can be used over the following surfaces: Type A: concrete, foam, well

adhered water-based coatings, weathered tar and gravel, weathered asphalt, rolled roofing, compatible single-ply membranes, slate and tile; Type B: galvanized steel, Galvalume, weathered pre-painted metal, tin, copper, aluminum, carbon steel, acrylic coatings in good condition, aged fiberglass, weathered EPDM, weathered plastic. Containers shall have labels, meeting ANSI standard and giving adequate use instructions, firmly secure to each container. Labels shall meet all federal regulation requirements of the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard in CFR 1910.1200.

C. CLASSIFICATION. There will be two types of coatings covered by this specification:

Type A – ‘Regular Roof Coating’: The product should be able to achieve an applied spread rate of 30-40 sqft per gallon when applied in one coat at 32 mils DFT (dry film thickness) over a smooth, non-porous surface. Type B – ‘Metal Roof Coating’: The product should be able to achieve an applied spread rate of 30-40 sqft per gallon when applied in one coat at 32 mils DFT (dry film thickness) over a smooth, non-porous surface.

II. REQUIREMENTS:

A. MATERIALS. The coating shall be formulated from materials as specified herein. Materials not specified shall be selected by the supplier and shall be subject to all the provisions of this specification. The coating shall be free from material which is known to be toxic to personnel under normal conditions of use.

1. VEHICLE. The vehicle shall consist of a combination of soybean oil polyester resin,

soybean oil and other natural agricultural oils. 2. RESTRICTED METALS. The coating shall comply with the latest requirements of the

Federal, Florida State, City or Local Governments for maximum allowable restricted metals content.

3. VOC COMPLIANCE. The coating shall comply with the latest requirements of the

Federal, Florida State, City or Local Governments for the maximum allowable VOC content at the time of purchase.

1. QUANTITATIVE REQUIREMENTS. The coating shall conform to the quantitative requirements

as specified in Table I.

Attachment




CHARACTERISTICS MINIMUM MAXIMUM


2. Biobased Content (%) 20 -

3. Solar Reflectance (L, spectral whiteness) 65 -

4. Thermal Emmittance (unit-less value) .8 .9

5. Consistency (Brookfield Rotational

Viscosity, cps)

a) Type A:

b) Type B:

28,000 35,000

35,000 45,000

6. Drying Time (hr) to touch

a) Type A: 32 mils DFT

b) Type B: 32 mils DFT

72 24

- -

7. Weight per gallon (lb)

a) Type A:

b) Type B:

9.0 10.0

10.0 11.0

8. Surface Burning Characteristics

Flame Spread Smoke Developed

0 0

(Class A)

25 450

(Class A)

9. Dry Opacity/Contrast Ratio:

a) Type A: 32 mils DFT

b) Type B: 32 mils DFT

1.00 1.00

- -

10. Permeability-Dry Cup Method (perms)

a) Type A: @ 32 mils DFT

b) Type B: @ 32 mils DFT

0.35 0.35

0 0

11. Volume Solids (%)

a) Type A: b) Type B:

64.9 61.3

68.9 65.1

12. Resistance of Coatings to Fungal

Defacement (category)

- 0 (no growth)


1. COLOR. This coating shall be white or stock factory ground in colors.


preservatives to prevent spoilage for two years. No special storage requirements, will not

freeze.


4. ALKALI RESISTANCE. When tested as specified in III.A., a film of the coating shall not

show any cracking, softening or loss of adhesion. Wrinkling shall be disregarded.

Attachment


5. MATERIAL SAFETY DATA SHEET (MSDS). An MSDS clearly identifying this product, filled

out completely according to the Florida Right-to-Know Law, Chapter 442, Florida Statutes,

MUST BE submitted with each sample submitted for certification.

6. CONDITION IN CONTAINER. The coating when tested as specified in Table II, shall be free

from grit, seeds, skins, lumps, and livering, and shall show no more pigment settling or

caking than can be reincorporated into a smooth homogenous state. In a freshly opened

container, there shall be no rusting on the container.

7. FLEXIBILITY. When tested as specified in III.B., there shall be no cracking, chipping, or

flaking.


The failure of any test in this section shall constitute a failure of the product to conform to the specification. Unless otherwise noted, all test methods cited are the latest published revision.


accordance with the methods as specified in Table II.


TEST METHOD


Solar Reflectance* ASTM C 1459

Thermal Emmittance* ASTM C 1371


Consistency, rotational viscosity* ASTM D 2196




Surface Burning Characteristics* ASTM E-84-08

Biobased Content* ASTM D 6866

Volume Solids* ASTM D 2697

Resistance of Coatings to Fungal Defacement*

ASTM D 5590 (with Stachybotrys Charatrum)

*A letter of certification from independent testing laboratory must be submitted reporting the permeability, solar reflectance, thermal emmittance, consistency, biobased content, flame spread, volume solids and resistance to fungal defacement in accordance with stated test methods.

B. ALKALI RESISTANCE. Immerse a solvent clean, dry test tube in a 400 ml beaker containing

4 inches of well-mixed coating for 5 seconds. Withdraw and suspend the tube in the same


exercised that the adhering film is not rubbed off. Immerse the coated portion of the test

tube for 30 minutes in a 350 ml beaker containing 125 ml of 2 % sodium hydroxide solution

maintained at 25 °C. Remove the test tube and allow to dry for 2 hours. Examine the

adhering material for compliance with II.C.5.

Attachment


C. FLEXIBILITY. Draw down a film of the coating with a 0.002 inch doctor blade


2012.2). Air dry for 48 hours 25 °C and 50% relative humidity and bend rapidly over a 1/8





purchaser’s sample fails, the manufacturer shall pay for the actual cost of testing.

Failure of any sample so taken to comply with the specification requirements shall

invalidate any purchase contract made under this invitation unless the manufacturer

requests a repeat quality control test. This second sample shall be from the same batch.

The manufacturer shall pay for the second quality control test should the sample fail,

and this invalidates any purchase contract made under this invalidate. If the second

sample passes, the manufacturer is not responsible for paying the actual cost of the test,

and results obtained from the second quality control test shall prevail.


made at point of delivery by the purchaser. MSDS shall be submitted with each shipment

in accordance with the Florida Right-to-Know Law, Chapter 442, Florida Statutes, and

shall be identical to the MSDS supplied for initial certification.

NOTE: TESTING TO MEET THIS SPECIFICATION DOES NOT INCLUDE AN IN-USE PERFORMANCE TEST. ALL EDUCATIONAL AGENCIES SHOULD CONSIDER AN IN-USE PERFORMANCE TEST BEFORE PURCHASING THIS PRODUCE. ORIGINAL MP-57 - APPROVED on July 25, 2008. ________________________________________________ PRESIDENT FLORIDA SCHOOL PLANT MANAGEMENT ASSOCIATION ________________________________________________ CHAIR FSPMA PAINT SPECIFICATIONS COMMITTEE

Attachment

Page 5 MP- 58.0 AGRICULTURAL OIL-BASED ARCHITECHURAL COATING (SEALER)




MP-58

AGRICULTURAL OIL-BASED ARCHITECHURAL COATING (SEALER) I. SCOPE, USE AND CLASSIFICATION:

A. SCOPE. This specification covers a high-solids, biobased, reflective, water-proof, flexible architectural coating designed to perform on exterior wall and building above grade surfaces.

B. USE. This product can be used over the following surfaces: concrete, concrete block,

precast concrete, brick, terra cotta, stucco, steel, aluminum, slate, clay and tile. Containers shall have labels, meeting ANSI standard and giving adequate use instructions, firmly secure to each container. Labels shall meet all federal regulation requirements of the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard in CFR 1910.1200.

C. CLASSIFICATION. There will be one type of coating covered by this specification:

Type A – ‘Regular Architectural Coating’: The product should be able to achieve an applied spread rate of 30-40 sqft per gallon when applied in one coat at 25 mils DFT (dry film thickness) over a smooth, non-porous surface.

II. REQUIREMENTS:

A. MATERIALS. The coating shall be formulated from materials as specified herein. Materials not specified shall be selected by the supplier and shall be subject to all the provisions of this specification. The coating shall be free from material which is known to be toxic to personnel under normal conditions of use.

1. VEHICLE. The vehicle shall consist of a combination of soybean oil polyester resin,

soybean oil and other natural agricultural oils.

2. RESTRICTED METALS. The coating shall comply with the latest requirements of the Federal, Florida State, City or Local Governments for maximum allowable restricted metals content.

3. VOC COMPLIANCE. The coating shall comply with the latest requirements of the Federal,


B. QUANTITATIVE REQUIREMENTS. The coating shall conform to the quantitative requirements

as specified in Table I.

Attachment




CHARACTERISTICS MINIMUM MAXIUM


2. Biobased Content (%) 20 -

3. Solar Reflectance (L, spectral whiteness) 65 -

4. Thermal Emmittance (unit-less value) .8 .9

5. Consistency (Brookfield Rotational Viscosity, cps) 75,000 85,000

6. Drying Time (hr) to touch @ 25 mils DFT 72 --

7. Weight per gallon (lb) 10.0 11.0

8. Surface Burning Characteristics

Flame Spread Smoke Developed

0 0

(Class A)

25 450

(Class A)

9. Dry Opacity/Contrast Ratio @ 25 mils DFT: 1.00 -

10. Permeability-Dry Cup Method (perms) @ 25 mils DFT 0.35 0

11. Volume Solids (%) 59.4 63.1

12. Resistance of Coatings to Fungal Defacement (category) - 0 (no growth)


1. COLOR. This coating shall be white or stock factory ground in colors.


preservatives to prevent spoilage for two years. No special storage requirements, will not

freeze.


4. ALKALI RESISTANCE. When tested as specified in III.A., a film of the coating shall not show

any cracking, softening or loss of adhesion. Wrinkling shall be disregarded.

5. MATERIAL SAFETY DATA SHEET (MSDS). An MSDS clearly identifying this product, filled out

completely according to the Florida Right-to-Know Law, Chapter 442, Florida Statutes,

MUST BE submitted with each sample submitted for certification.

6. CONDITION IN CONTAINER. The coating when tested as specified in Table II, shall be free

from grit, seeds, skins, lumps, and livering, and shall show no more pigment settling or

caking than can be reincorporated into a smooth homogenous state. In a freshly opened

container, there shall be no rusting on the container.

7. FLEXIBILITY. When tested as specified in III.B., there shall be no cracking, chipping, or

flaking.


Attachment


The failure of any test in this section shall constitute a failure of the product to conform to the specification. Unless otherwise noted, all test methods cited are the latest published revision.


accordance with the methods as specified in Table II.


TEST METHOD


Solar Reflectance* ASTM C 1459

Thermal Emmittance* ASTM C 1371


Consistency, rotational viscosity* ASTM D 2196




Surface Burning Characteristics* ASTM E-84-08

Biobased Content* ASTM D 6866

Volume Solids* ASTM D 2697

Resistance of Coatings to Fungal Defacement*

ASTM D 5590 (with Stachybotrys Charatrum)

*A letter of certification from independent testing laboratory must be submitted reporting the permeability, solar reflectance, thermal emmittance, consistency, biobased content, flame spread, volume solids and resistance to fungal defacement in accordance with stated test methods.

B. ALKALI RESISTANCE. Immerse a solvent clean, dry test tube in a 400 ml beaker containing

4 inches of well-mixed coating for 5 seconds. Withdraw and suspend the tube in the same


exercised that the adhering film is not rubbed off. Immerse the coated portion of the test

tube for 30 minutes in a 350 ml beaker containing 125 ml of 2 % sodium hydroxide solution

maintained at 25 °C. Remove the test tube and allow to dry for 2 hours. Examine the

adhering material for compliance with II.C.5.

C. FLEXIBILITY. Draw down a film of the coating with a 0.002 inch doctor blade


2012.2). Air dry for 48 hours 25 °C and 50% relative humidity and bend rapidly over a 1/8





purchaser’s sample fails, the manufacturer shall pay for the actual cost of testing. Failure

of any sample so taken to comply with the specification requirements shall invalidate any

purchase contract made under this invitation unless the manufacturer requests a repeat

Attachment


quality control test. This second sample shall be from the same batch. The manufacturer

shall pay for the second quality control test should the sample fail, and this invalidates any

purchase contract made under this invalidate. If the second sample passes, the

manufacturer is not responsible for paying the actual cost of the test, and results obtained

from the second quality control test shall prevail.


made at point of delivery by the purchaser. MSDS shall be submitted with each shipment

in accordance with the Florida Right-to-Know Law, Chapter 442, Florida Statutes, and shall

be identical to the MSDS supplied for initial certification.

NOTE: TESTING TO MEET THIS SPECIFICATION DOES NOT INCLUDE AN IN-USE PERFORMANCE TEST. ALL EDUCATIONAL AGENCIES SHOULD CONSIDER AN IN-USE PERFORMANCE TEST BEFORE PURCHASING THIS PRODUCE. ORIGINAL MP-58 - APPROVED on July 25, 2008. ________________________________________________ PRESIDENT FLORIDA SCHOOL PLANT MANAGEMENT ASSOCIATION ________________________________________________ CHAIR FSPMA PAINT SPECIFICATIONS COMMITTEE

MEETING AGENDA


Phone 786-275-0775 • Fax 786-275-0833 • http://materials.dadeschools.net/

L-1240-DD

September 8, 2008



Paint Products Committee

Re: Florida School Plant Management Association (FSPMA) Paint Committee Meeting of September 16,

2008.

Dear Committee Members,

The referenced committee meeting is scheduled as follows:

Date: Tuesday, September 16, 2008

Time: 2:00 pm – 4:00 pm

Place: Daytona Beach Hilton

100 North Atlantic Ave.

Daytona Beach, FL 32118

(386) 254-8200

The agenda has been established as follows:

1. Introductions and Quorum confirmation.

2. Review and approval voting of the laboratory testing results of products submitted since the July

25th, 2008 meeting.

3. Review of samples currently on Exterior Exposure.

4. Review and approval voting of an updated historical summary report of FSPMA-related MT&E

laboratory paint testing activity.

5. Review and approval voting of a payment report associated to the FSPMA Paint Product

Certification Program.

6. Review and approval voting of the minutes corresponding to the last committee meeting held on July

25th, 2008 including a preliminary follow-up on the completion status of the agreements reached at

the referred meeting.

L-1240-DD – September 8, 2008

7. Discussion and approval voting of proposed % of solids by volume acceptance criteria for selected

FSPMA specifications as per a committee agreement reached at the July 25th, 2008 meeting. See

‘Proposed % of Solids by Volume Criteria’ Appendix in the September 16, 2008 FSPMA Paint

Committee Meeting Report. Mr. Bruce Alvin, INSL-X/Coronado Paints.

8. Presentation, discussion, and approval voting of revised versions of the ‘Zero VOC’ FSPMA

specifications originally submitted by INSL-X/Coronado Paints: a) Interior ‘Zero VOC’ Odorless

Acrylic Primer, b) ‘Zero VOC’ Interior Flat, c) ‘Zero VOC’ Interior Eggshell, and d) ‘Zero VOC’

Interior Semi-Gloss. Mr. Bruce Alvin, INSL-X/Coronado Paints, and Mr. Robert Benson & Mr. Dick

Doyle, TKO Waterproof Coatings.

9. Open general committee discussion regarding the convenience of adding maximum allowable VOC

limits to existing FSPMA interior wall paint specifications in order to actively move towards more

environmentally-friendly products without reducing the minimum performance level required at

school sites.

10. Creation of a sub-committee to provide technical advice regarding permeability test specific method

references and tolerance requirements included in the following FSPMA specifications: MP- 21.3-

‘Elastomeric, Acrylic-Base, Exterior, Flat, White and Tints’, MP-44.2-‘Acrylic Base Interior

Textured Coating Aggregate and Non-Aggregate’, MP-45.2-‘Acrylic Base Exterior Textured

Aggregated Coating’, MP- 56.2-‘Elastomeric Roof Paint’, MP-57.0-‘Agricultural Oil-Based Roof

Coating (Sealer)’, and MP-58.0-‘Agricultural Oil-Based Architectural Coating (Sealer)’. Dr. Alberto

Velazquez and Ms. Mercedes Leon, MT&E.

11. Other Business.

The report corresponding to this meeting is currently posted on the MT&E website

http://materials.dadeschools.net/. Please, review the report, bring a printed copy to the meeting, and be

prepared to discuss and vote on each item.

Your attendance and participation is appreciated.

Sincerely,


Materials Testing and Evaluation Department


DD:AV:ML:aek

cc: Mr. Joseph A. Gomez, M-DCPS, #9171

Mr. Barry S, Meltz, M-DCPS, #9171

Ms. Barbara D. Jones, M-DCPS, #9171


MT&E Files


LABORATORY TEST RESULTS



L-1241-DD

September 8, 2008




Dear Committee Members,

The testing results obtained for samples submitted for evaluation to determine compliance with applicable

Florida School Plant Management Association (FSPMA) specifications are shown in the following table:

LAB NO.

CERTIFICATION/ RE-CERTIFICATION

DESCRIPTION SPEC NO. COMPLIANCE EVALUATION RESULTS

P2583 RE-CERTIFICATION ACRYLIC BASE INTERIOR TEXTURED COATING AGGREGATE AND NON-

AGGREGATE 44.2 PASSED

P2590 RE-TEST FOR P2586 ELASTOMERIC ROOF PAINT 56.1 PASSED

P2591 RE-TEST FOR P2563 EXTERIOR/INTERIOR, ALKALI

RESISTANT-STAIN BLOCK UNIVERSAL PRIMER/SEALER, ACRYLIC-BASE

38.3 PASSED

P2596 RE-TEST FOR P2594 ENAMEL, ALKYD, GLOSS 5.7 PASSED

P2602 RE-TEST FOR P2593 ENAMEL, ALKYD, GLOSS 5.7 PASSED

P2607 CERTIFICATION EXTERIOR/INTERIOR, ALKALI

RESISTANT-STAIN BLOCK UNIVERSAL PRIMER/SEALER, ACRYLIC-BASE

38.3 PASSED

P2610 CERTIFICATION INTERIOR ENAMEL, LATEX-BASE,

SEMI-GLOSS 32.2 PASSED

P2612 RE-TEST FOR P2609 EXTERIOR-INTERIOR ENAMEL, LATEX-

BASE, SEMI-GLOSS 6.11

FAILED THE TOTAL % OF SOLIDS/WEIGHT OF PAINT WITH 43 %

AND A MINIMUM OF 45% IS SPECIFIED


There are three paint samples at the MT&E receiving area at this point which have been submitted for

FSPMA certification but the required initial documentation is incomplete, therefore, they are not listed here

as being ‘IN PROCESS’. As soon as the vendor submits all required information, the compliance

testing/evaluation process will be initiated and the results will be timely reported.

Sincerely,


Materials Testing and Evaluation Department


DD:AV:ML:aek





MT&E Files

SAMPLES ON EXTERIOR EXPOSURE



L-1242-DD

September 8, 2008




Re: Review of Paint Samples currently on Exterior Exposure.

Dear Committee Members:

The following table shows a list of paint samples currently on Exterior Exposure at MT&E:

MP

No. PAINT IDENTIFICATION

LAB

NO. RECOMMENDED PRIMER

RECOMMENDED

PRIMER LAB

NO.

INITIAL

EXPOSURE

DATE

FINAL

EXPOSURE

DATE

27.2 QUALI-CRAFT EXT. LATEX HIGH GLOSS

B21WV5710-1710 P2523

LOXON MASONRY ET ACRYLIC

PRIMER A24W300 P2494 10/4/2007 10/3/2008

2.9 FLEX BON CLASSIC INT/EXT FLAT

CV10014WG P2527

EXTERIOR LATEX CHALK

CONDITIONER 140 SERIES P2449 10/4/2007 10/3/2008

26.4 RUST SCAT ACRYLIC GLOSS ENAMEL 80-1 P2530 RUST-SCAT LATEX METAL PRIMER #

36-11 P2579 10/4/2007 10/3/2008

2.9 DR 15 (01) WONDER SHIELD FLAT HOUSE

PAINT P2537

PRIMZ 220 EXT LATEX WOOD

PRIMER/SEALER P2565 10/4/2007 10/3/2008

6.10 DR 17 (01) WONDER SHIELD S/G HOUSE

& TRIM PAINT P2538


PRIMER/SEALER P2565 10/4/2007 10/3/2008

28.3 DR 18 (01) WONDER SHIELD GLOSS

HOUSE PAINT P2542


PRIMER/SEALER P2565 10/4/2007 10/3/2008

27.2 RG 65 (01) REGENCY EXT/INT ACRYLIC

GLOSS ENAMEL P2548


PRIMER/SEALER P2565 10/4/2007 10/3/2008

2.9 PREMIUM GOLD COLLECTION FLAT

ACRYLIC HOUSE TRIMTABLE 10-1 P2553

CRYLICOTE GOLD COLLECTION

ACRYLIC HOUSE TRIMABLE 410-11 P2554 10/4/2007 10/3/2008

26.4 PITT-TECH INT/EXT 100% ACRYLIC HIGH

GLOSS DTM INDUSTRIAL ENAMEL 90-374 P2562

PITT-TECH INT/EXT 100% ACRYLIC

PRIMER/FINISH DTM # 90-712 P2577 10/4/2007 10/3/2008

26.4 DEVFLEX QD 4208 QUICK DRY INT/EXT

WATERBORNE GLOSS ENAMEL P2567

DEVFLEX PF DIRECT TO METAL

PRIMER AND FINISH P2574 10/4/2007 10/3/2008

2.9 PROSIDING PLUS EXTERIOR COATING

100% ACRYLIC 57-110 P2568

PERMA-CRETE INT/EXT ALKALI-

RESISTANT PRIMER 4-603 P2571 10/4/2007 10/3/2008


MP No.

PAINT IDENTIFICATION LAB NO.

RECOMMENDED PRIMER RECOMMENDED

PRIMER LAB

NO.

INITIAL EXPOSURE

DATE

FINAL EXPOSURE

DATE

5.7 RUST SCAT POLYURETHANE HIGH GLOSS

INT/EXT 31-1 WHITE P2602

RUST SCAT ALKYD METAL PRIMER INT/EXT 35-111 WHITE

P2603 6/20/2008 6/19/2009

5.7

SPEEDHIDE INT/EXT URETHANE

MODIFIED INDUSTRIAL ENAMEL GLOSS

OIL 6-782

P2596 EXTERIOR ACRYLIC PRIMER STAIN

KILLER # 714 P2597 8/6/2008 8/6/2009

28.3 FLEX BON #95 SERIES PREMIUM S/G

EXTERIOR CV10095WG P2614

MASONRY: #140 SERIES EXTERIOR

LATEX CHALK CONDITIONER

WOOD: PREP-RITE PRO BLOCK

INT/EXT LATEX PRIMER SEALER

MASONRY:P2472

WOOD: P2613 8/6/2008 8/6/2009

Sincerely,



Department of Materials Testing and Evaluation

DD:AV:ML:aek





MT&E Files

FSPMA APPROVED PRODUCT LIST

FSPMA PAINT APPROVED BRAND LIST AS OF 9/8/2008

MANUFACTURER PRODUCT NAME RECOMMENDED PRIMER

INITIAL

EXPOSURE

DATE

FINAL

EXPOSURE

DATE

EXPOSURE RESULTS DATE CERTIFIED EXPIRATION DATE STATUS

SPECIFICATION MP-1.8

COLOR WHEEL PAINT MFG.

CO., INC.VINA FLAT INTERIOR LATEX WALL PAINT 400 N/A N/A N/A N/A 9/5/2006 9/4/2011 CERTIFIED


DURON PAINTS ULTRA DELUX EXT 100% ACRYLIC LATEX FLAT 66-91411MAX-BOND WATERBORNE ACRYLIC SURFACE

CONDITIONER 80-0751111/6/2006 11/6/2007 MASONRY:GOOD, PASSED 9/5/2006 9/4/2011 CERTIFIED

FLEX BON PAINTS FLEX BON CLASSIC INT/EXT FLAT CV10014WGEXTERIOR LATEX CHALK CONDITIONER 140

SERIES10/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 3/8/2007 3/6/2012 CERTIFIED

DEVOE PAINTS DR 15 (01) WONDER SHIELD FLAT HOUSE PAINT PRIMZ 220 EXT LATEX WOOD PRIMER/SEALER 10/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 5/1/2007 4/29/2012 CERTIFIED

CORONADO PAINT CO., INC.PREMIUM GOLD COLLECTION FLAT ACRYLIC HOUSE

TRIMTABLE 10-1

CRYLICOTE GOLD COLLECTION ACRYLIC

HOUSE TRIMABLE 410-11 10/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 7/16/2007 7/14/2012 CERTIFIED

PPG PROSIDING PLUS EXTERIOR COATING 100% ACRYLIC 57-110PERMA-CRETE INT/EXT ALKALI-RESISTANT

PRIMER 4-60310/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 7/27/2007 7/25/2012 CERTIFIED


CO., INC.TROPICOAT HOUSE PAINT ACRYLIC EXT 310

OPTIMA PREMIUM ALL PRIME 100% PURE

ACRYLIC LATEX #33010/16/2007 10/14/2012 CERTIFIED


SHERWIN-WILLIAMS CO. BUILDER SELECT EXT ACRYLIC FLAT B2WW7203LOXON MASONRY ET ACRYLIC PRIMER

A24W30011/6/2006 11/6/2007 MASONRY:GOOD, PASSED 9/5/2006 9/4/2011 CERTIFIED



PPGSPEEDHIDE INT/EXT URETHANE MODIFIED INDUSTRIAL

ENAMEL GLOSS OIL 6-782

EXTERIOR ACRYLIC PRIMER STAIN KILLER #

7148/6/2008 8/6/2009 ON EXTERIOR EXPOSURE 7/25/2008 7/24/2013 CERTIFIED

CORONADO PAINT CO., INC.RUST SCAT POLYURETHANE HIGH GLOSS INT/EXT 31-1

WHITE

RUST SCAT ALKYD METAL PRIMER INT/EXT

35-111 WHITE6/20/2008 6/20/2009 ON EXTERIOR EXPOSURE 7/25/2008 7/24/2013 CERTIFIED

SPECIFICATION MP-6.11 EXTERIOR-INTERIOR, LATEX-BASE, SEMI-GLOSS WHITE

AND TINTS

CORONADO PAINT CO., INC. SUPREME LATEX SEMI GLOSS HOUSE PAINT 12-1ELAST-O-MERIC ACRYLIC SEALER MASONRY

48-1112/6/2004 12/6/2005

MANSONRY: VERY GOOD WOOD:

GOOD /FAIR , FAILED9/1/2004 8/31/2009

WILL EXPIRE WITHIN

ONE YEAR

ICI-GLIDDENDULUX PROFESSIONAL S/G ACRYLIC EXT. FINISH # 2406-

0100

DULUX PROFESSIONAL S/G ACRYLIC EXT.

FINISH # 2406-01009/21/2005 9/21/2006

MASONRY: VERY GOOD, PASSED;

WOOD: GOOD, PASSED8/15/2005 8/14/2010 CERTIFIED

FLEX BON PAINTS595-W PROFESSIONAL INT/EXT ACRYLIC LATEX WALL &

TRIM S/G

#140 SERIES EXTERIOR LATEX CHALK

CONDITIONER2/7/2006 2/7/2007


WOOD: FAIR, FAILED. 9/6/2005 9/5/2010 CERTIFIED

DEVOE PAINTS DR 17 (01) WONDER SHIELD S/G HOUSE & TRIM PAINT PRIMZ 220 EXT LATEX WOOD PRIMER/SEALER 10/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 5/1/2007 4/29/2012 CERTIFIED

INTERIOR, ALKYD, SEMI-GLOSS, WHITE AND TINTS

NO APPROVED BRANDS UNDER THIS CATEGORY

LATEX-BASE, INTERIOR, FLAT, WHITE & TINT

ACRYLIC-BASE EXTERIOR, FLAT, WHITE/TINT

VINYL LATEX EXTERIOR MASONRY PAINT, WHITE AND LIGHT TINTS (All tested on masonry)

ENAMEL, ALKYD, GLOSS , WHITE AND TINTS

PAGE 1



INITIAL

EXPOSURE

DATE

FINAL

EXPOSURE

DATE


LATEX-BASE, INTERIOR, FLAT, WHITE & TINTSPECIFICATION MP-9.5

CORONADO PAINT CO., INC. SUPER KOTE 5000 ACRYLIC TRAFFIC PAINT # 66 N/A N/A N/A N/A 11/15/2008 11/14/2013 CERTIFIED



CO., INC.

TI-GARD 1250 CONTRACTOR'S CHOICE LATEX MASONRY

CHALKING CONDITIONERN/A N/A N/A N/A 9/20/2006 9/19/2011 CERTIFIED

DURON PAINTSMAX-BOND WATERBORNE ACRYLIC SURFACE CONDITIONER

80-07511N/A N/A N/A N/A 9/5/2006 9/4/2011 CERTIFIED

FLEX BON PAINTS EXTERIOR LATEX CHALK CONDITIONER 140 SERIES N/A N/A N/A N/A 7/29/2004 7/28/2009WILL EXPIRE WITHIN

ONE YEAR

PPG EXTERIOR ACRYLIC MASONRY SEALER UC80013 N/A N/A N/A N/A 7/17/2008 7/16/2013 CERTIFIED

CORONADO PAINT CO., INC. ACRYLIC MANSONRY SURFACE CONDITIONER 940-11 N/A N/A N/A N/A 11/5/2006 11/4/2011 CERTIFIED



SPECIFICATION MP-22.2 EXTERIOR-INTERIOR, PRIMER SEALER, ACRYLIC-BASE,

FLAT WHITE

CORONADO PAINT CO., INC.SUPER KOTE 5000 ACRYLIC ENAMEL UNDERCOATER 1178-

11N/A N/A N/A N/A 11/16/2005 11/15/2010 CERTIFIED



DURON PAINTSMAX-WOOD SIDING AND TRIM STAIN 100% ACRYLIC

FORMULA 28-303NO PRIMER 12/6/2004 12/6/2005 WOOD: VERY GOOD 4/26/2004 4/25/2009

WILL EXPIRE WITHIN

NINE MONTHS


CORONADO PAINT CO., INC. RUST SCAT ACRYLIC METAL PRIMER 1036-211 N/A N/A N/A N/A 3/8/2007 3/6/2012 CERTIFIED

STAIN ACRYLIC-BASE, EXTERIOR, FLAT,

ACRYLIC-BASE, PRIMER, EXTERIOR-INTERIOR, METAL SURFACES, GRAY

TWO COMPONENT GLAZE, GLOSS & SEMI-GLOSS, SOLVENT BASE, INTERIOR SURFACES



ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT, WHITE AND TINTS

EXTERIOR-INTERIOR, ANTI-SLIP, SOLVENT- BASE, FLAT, WHITE AND COLORS

TRAFFIC PAINT, WATER EMULSION BASED

PRIMER COATING, LATEX CONDITIONER FOR CHALKING EXTERIOR SURFACES


PAGE 2



INITIAL

EXPOSURE

DATE

FINAL

EXPOSURE

DATE



CORONADO PAINT CO., INC. RUST SCAT ACRYLIC GLOSS ENAMEL 80-1 RUST-SCAT LATEX METAL PRIMER # 36-11 10/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 3/8/2007 3/6/2012 CERTIFIED

PPGPITT-TECH INT/EXT 100% ACRYLIC HIGH GLOSS DTM

INDUSTRIAL ENAMEL 90-374

PITT-TECH INT/EXT 100% ACRYLIC

PRIMER/FINISH DTM # 90-71210/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 7/20/2007 7/18/2012 CERTIFIED

DEVOE PAINTSDEVFLEX QD 4208 QUICK DRY INT/EXT WATERBORNE

GLOSS ENAMEL

DEVFLEX PF DIRECT TO METAL PRIMER AND

FINISH10/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 7/16/2007 7/14/2012 CERTIFIED


CORONADO PAINT CO., INC. RUST SCAT LATEX HIGH GLOSS ENAMEL 80-1 GRIP AND SEAL LATEX STAIN KILLER 116-11 3/5/2004 3/5/2005PASSED W/ P-2436 (MASONRY-VERY

GOOD, WOOD-VERY GOOD)2/4/2004 2/2/2009

WILL EXPIRE WITHIN

SIX MONTHS


CO., INC.OPTIMA SUPER ACRYLIC EXTERIOR SEMI-GLOSS 350


ACRYLIC LATEX #33011/6/2006 11/6/2007 MASONRY:GOOD, PASSED 9/5/2006 9/4/2011 CERTIFIED

SHERWIN-WILLIAMS CO. QUALI-CRAFT EXT. LATEX HIGH GLOSS B21WV5710-1710LOXON MASONRY ET ACRYLIC PRIMER

A24W30010/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 12/5/2006 12/4/2011 CERTIFIED

DEVOE PAINTS RG 65 (01) REGENCY EXT/INT ACRYLIC GLOSS ENAMEL PRIMZ 220 EXT LATEX WOOD PRIMER/SEALER 10/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 5/1/2007 4/29/2012 CERTIFIED


PPG SPEEDHIDE ACRYLIC EXT. S/G LATEX 6-901

PERMACRETE # 4-603 (WOOD, STUCCO &

CONCRETE ) , PERMACRETE # 6-209

(FERROUS METALS) , PERMACRETE # 90-712

(NON-FERROUS).

3/5/2004 3/5/2005PASSED W/ P-2437 (MASONRY-

GOOD, WOOD-GOOD)1/20/2004 1/18/2009

WILL EXPIRE WITHIN

SIX MONTHS

SHERWIN-WILLIAMS CO.DURA-CRAFT EXTERIOR 100% ACRYLIC S/G HOUSE PAINT #

B21WW171

LOXON HIGH PERFORMANCE EXT. ACRYLIC

PRIMER A24 W300 9/21/2005 9/21/2006



ICI-GLIDDENDULUX PROFESSIONAL S/G ACRYLIC EXT. FINISH # 2406-

0100

DULUX PROFESSIONAL S/G ACRYLIC EXT.

FINISH # 2406-01009/21/2005 9/21/2006



M.A. BRUDER & SONS, INC. SEA SHORE ACRYLIC LATEX S/G TRIM # 024-1501 SEA SHORE PRIME COAT LATEX # 056-9581 2/7/2006 2/7/2007MASONRY:VERY GOOD, PASSED

;WOOD:VERY GOOD, PASSED.11/16/2005 11/15/2010 CERTIFIED


CO., INC.TROPICOAT HOUSE PAINT 100% ACRYLIC EXT S/G 320


ACRYLIC LATEX #33011/6/2006 11/6/2007

MASONRY:GOOD, PASSED; WOOD:

GOOD-FAIR, FAILED9/21/2006 9/20/2011 CERTIFIED

DEVOE PAINTS DR 18 (01) WONDER SHIELD GLOSS HOUSE PAINT PRIMZ 220 EXT LATEX WOOD PRIMER/SEALER 10/4/2007 10/3/2008 ON EXTERIOR EXPOSURE 5/1/2007 4/29/2012 CERTIFIED

FLEX BON PAINTS FLEX BON #95 SERIES PREMIUM S/G EXTERIOR CV10095WG

MASONRY: #140 SERIES EXTERIOR LATEX

CHALK CONDITIONER WOOD:

PREP-RITE PRO BLOCK INT/EXT LATEX

PRIMER SEALER

8/6/2008 8/6/2009 ON EXTERIOR EXPOSURE 12/21/2006 12/20/2011 CERTIFIED

ACRYLIC-BASE GLOSS ENAMEL, METAL SURFACES, WHITE AND TINTS

ACRYLIC-BASE, GLOSS, EXTERIOR, WHITE & TINTS

ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR, WHITE AND TINTS

PAGE 3



INITIAL

EXPOSURE

DATE

FINAL

EXPOSURE

DATE



SHERWIN-WILLIAMS CO. HARMONY ZERO VOC EGG SHELL INT B9W951 N/A N/A N/A N/A 9/21/2006 9/20/2011 CERTIFIED

SHERWIN-WILLIAMS CO.PRO MAR 400 INT. LATEX EGG-SHELL B20W4451 6403-

54270N/A N/A N/A N/A 12/12/2006 12/11/2011 CERTIFIED


CO., INC.VINA GLOSS INTERIOR LATEX SEMI GLOSS #420 N/A N/A N/A N/A 3/8/2007 3/6/2012 CERTIFIED


DURON PAINTS BOND'N'SEAL EXT ACRYLIC HOUSE PAINT PRIMER 08-124-11 N/A N/A N/A N/A 5/17/2004 5/16/2009WILL EXPIRE WITHIN

NINE MONTHS

SHERWIN-WILLIAMS CO. LOXON MASONRY ET ACRYLIC PRIMER A24W300 N/A N/A N/A N/A 10/9/2006 10/8/2011 CERTIFIED


SHERWIN-WILLIAMS CO. WETHER PERFECT EXT OIL UNDERCOATER Y24W538 N/A N/A N/A N/A 9/21/2006 9/20/2011 CERTIFIED


SHERWIN-WILLIAMS CO. SUPER PAINT INT S/G LATEX A88W17 N/A N/A N/A N/A 9/21/2006 9/20/2011 CERTIFIED

SHERWIN-WILLIAMS CO. PRO MAR 200 INT LATEX S/G B31W2200 SERIES B31W2251 N/A N/A N/A N/A 9/21/2006 9/20/2011 CERTIFIED

M.A. BRUDER & SONS, INC. FRESH KOTE S/G INTERIOR LATEX 410-1691 N/A N/A N/A N/A 2/15/2006 2/14/2011 CERTIFIED

SHERWIN-WILLIAMS CO. MASTER HIDE LATEX S/G B31WW5251-6011 N/A N/A N/A N/A 12/12/2006 12/11/2011 CERTIFIED

SHERWIN-WILLIAMS CO. PRO MAR 400 INT LATEX S/G B31W4451 6403-54353 N/A N/A N/A N/A 12/12/2006 12/11/2011 CERTIFIED

DEVOE PAINTS RG 64 (01) REGENCY INTERIOR ACRYLIC S/G ENAMEL DR N/A N/A N/A N/A 5/1/2007 4/29/2012 CERTIFIED

PPG SPEEDHIDE INT ENAMEL SEMI-GLOSS ACRYLIC LATEX 6-500 N/A N/A N/A N/A 7/16/2008 7/15/2013 CERTIFIED

FLEX BON PAINTS FLEX BON PREMIUM INT SEMI GLOSS CV10097WG N/A N/A N/A N/A 3/28/2007 3/26/2012 CERTIFIED

INSL-X / CORONADO PAINT

CO., INC.SUPERKOTE 5000 ACRYLIC SEMI-GLOSS 32-1 WHITE N/A N/A N/A N/A 8/11/2008 8/10/2013 CERTIFIED

LATEX-ACRYLIC BASE, INTERIOR ENAMEL,SATIN GLOSS, WHITE AND TINTS

ACRYLIC-LATEX BASE, EXTERIOR, FLAT WOOD PRIMER

SOLVENT-BASE, EXTERIOR, FLAT, WOOD PRIMER

INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS,WHITE AND TINTS

PAGE 4



INITIAL

EXPOSURE

DATE

FINAL

EXPOSURE

DATE



CORONADO PAINT CO., INC. SUPER KOTE 5000 PROTECTION BLOCK FILLER 958-1 N/A N/A N/A N/A 2/4/2004 2/2/2009WILL EXPIRE WITHIN

SIX MONTHS


CORONADO PAINT CO., INC. STEP-SAVER ANTI-SLIP COATING 50 LINE N/A N/A N/A N/A 8/24/2007 8/22/2012 CERTIFIED


PPG PITT-TECH INT/EXT ACRYLIC HIGH GLOSS DTM ENAMEL

6-209 OR PITT-TECH # 90-712 (FERROUS

METALS), PITT-TECH #90-712 ACRYLIC

PRIMER (NON FERROUS).

3/5/2004 3/5/2005 PASSED W/ P-2431 (STEEL-GOOD) 11/24/2003 11/22/2008WILL EXPIRE WITHIN

SIX MONTHS

ICI-GLIDDENDEVFLEX GLOSS DTM WATERBORNE ACRYLIC ENAMEL #

65950100N/A 9/21/2005 9/21/2006 STEEL: VERY GOOD, PASSED 7/28/2005 7/27/2010 CERTIFIED



CORONADO PAINT CO., INC.CRYLICOTE GOLD COLLECTION ACRYLIC HOUSE PAINT 410-

11 BLOCKING PRIMERN/A N/A N/A N/A 7/25/2008 7/24/2013 CERTIFIED

CORONADO PAINT CO., INC. GRIP & SEAL LATEX STAIN KILLER 116-11 N/A N/A N/A N/A 4/20/2007 4/18/2012 CERTIFIED

CORONADO PAINT CO., INC. INSL-X AQUA LOCK PLUS AQ-0400 N/A N/A N/A N/A 4/20/2007 4/18/2012 CERTIFIED

PPGSEAL GRIP INT/EXT 100% ACRYLIC UNIVERSAL

PRIMER/SEALER 17-921N/A N/A N/A N/A 7/25/2008 7/24/2013 CERTIFIED


SHERWIN-WILLIAMS CO. HARMONY ZERO VOC EGG SHELL INT B9W951 N/A N/A N/A N/A 9/5/2006 9/4/2011 CERTIFIED

DEVOE PAINTSDR 32 (01) WONDER PURE ODOR FREE INT EGGSHELL

ENAMELN/A N/A N/A N/A 5/1/2007 4/29/2012 CERTIFIED




INT/EXT, CORROSION RESISTANT, WATER BASED, DIRECT-TO-METAL GLOSS ENAMEL, WHITE & TINTS

BLOCK FILLER, LATEX-BASE, INTERIOR-EXTERIOR, FLAT, WHITE

EXT/INT, ANTI-SLIP, WATER BORNE COATING, WHITE, TINTS & COLORS

INT/EXT ALKALI RESISTANT-STAIN BLOCK UNIVERSAL PRIMER/SEALER, ACRYLIC BASE

** FLAME CONTROL NO. 20-20 FLAT LATEX INTUMESCENT (CLASS "A") FIRE RETARDANT PAINT WHEN USED, ACCORDING TO MANUFACTURER'S INSTRUCTIONS, OVER ALL COMBUSTIBLE SURFACES (IE. DOUGLAS FIR) AND ALL

NONCOMBUSTIBLE SURFACES (IE. ASBESTOS- CEMENT BOARD)


ONE OR TWO COMPONENT ALIPHATIC POLY- URETHANE, WATER BASE, ZERO VOC OR VOC COMPLIANT, ODORLESS, CLEAR AND TINTED GLOSS OR SATIN (FOR ROLL APPLICATION ONLY DUE TO THE RELEASE OF ISOCYANATES)

LATEX BASE, LOW ODOR, LOW VOC, EGGSHELL, INTERIOR, WHITE AND TINT PAINT

INT/EXT, CORROSION RESISTANT, WATER BASED, DIRECT-TO-METAL SEMI-GLOSS ENAMEL, WHITE & TINTS


PAGE 5



INITIAL

EXPOSURE

DATE

FINAL

EXPOSURE

DATE



FLAME CONTROL FLAME CONTROL FIRE RETARDANT PAINT NO. 40-40 N/A N/A N/A N/A CERTIFIED


FLAME CONTROL FLAME CONTROL FIRE RETARDANT VARNISH SEALER NO.6 N/A N/A N/A N/A CERTIFIED

FLAME CONTROLFLAME CONTROL FIRE RETARDANT CLEAR SATIN VARNISH

NO.166N/A N/A N/A N/A CERTIFIED

FLAME CONTROLFLAME CONTROL FIRE RETARDANT CLEAR OVERCOAT

NO.167 FOR 166N/A N/A N/A N/A CERTIFIED


CORONADO PAINT CO., INC.SUPER KOTE 5000 TOUGH-TEX FLAT ACRYLIC KNOCK

DOWN FINISH 908-1N/A N/A N/A N/A 9/2/2008 9/1/2013 CERTIFIED




ZINSSERPERMA-WHITE MOLD & MILDEW PROOF INTERIOR PAINT

EGGSHELLN/A N/A N/A N/A 2/15/2006 2/14/2011 CERTIFIED


SATINN/A N/A N/A N/A 2/15/2006 2/14/2011 CERTIFIED


SEMI-GLOSSN/A N/A N/A N/A 2/15/2006 2/14/2011 CERTIFIED

SOMAY PRODUCTS, INC. STERI-SHIELD FUNGISTATIC PAINT # 8630 N/A N/A N/A N/A 10/3/2007 10/1/2012 CERTIFIED



CO., INC.

CHECKRUST INSL-TILE INSL-X EP 5500 (Epoxy Pre-Primer

Two-Component)N/A N/A N/A N/A 7/18/2006 7/17/2011 CERTIFIED

** FLAME CONTROL NO. 40-40 LOW GLOSS LATEX (CLASS "A") FIRE RETARDANT PAINT WHEN USED, ACCORDING TO MANUFACTURER'S INSTRUCTIONS, OVER ALL NONCOMBUSTIBLE SURFACES (IE. ASBESTOS-CEMENT BOARD)

THE PRODUCT MUST BE USED OVER FLAME CONTROL NO. 20-20 FLAT LATEX INTUMESCENT FIRE RETARDANT PAINT TO ACHIEVE A CLASS "A" FIRE RETARDANT RATING WHEN APPLIED TO COMBUSTIBLE SURFACES (IE. DOUGLAS

FIR)

** FLAME CONTROL VARNISH SYSTEM: 1. FLAME CONTROL NO. 6 CLEAR WOOD SEALER (1ST. COAT) 2. FLAME CONTROL NO. 166 CLASS "A" FIRE RETARDANT INTUMESCENT VARNISH (2ND. COAT) 3. FLAME CONTROL NO. 167

CLASS "A" FIRE RETARDANT VARNISH OVERCOAT FOR NO. 166 (3RD COAT)

ACRYLIC BASE, INTERIOR TEXTURE COATING, AGGREGATE AND NON-AGGREGATE


ACRYLIC BASE, EXTERIOR TEXTURE COATING, AGGREGATE AND NON-AGGREGATE

U.V. WATERBORNE CLEAR COAT (PROPOSED)

MOLD AND MILDEW PROOF ACRYLIC PAINT


EPOXY BASED RUST-PENETRATING PRE-PRIMER.

PAGE 6



INITIAL

EXPOSURE

DATE

FINAL

EXPOSURE

DATE






CO., INC.

STIX WATERBORNE URETHANE ACRYLIC BONDING PRIMER

SXA 110N/A N/A N/A N/A 7/18/2006 7/17/2011 CERTIFIED

ZINSSER BULLS EYE 1-2-3 PRIMER SEALER # 02001 N/A N/A N/A N/A 7/18/2006 7/17/2011 CERTIFIED



CO., INC.INSL-X CHECK RUST WATER REDUCIBLE PRIMER WR-P811 N/A N/A N/A N/A 7/18/2006 7/17/2011 CERTIFIED

ZINSSER BULLS EYE 1-2-3 PRIMER SEALER # 02001 N/A N/A N/A N/A 7/18/2006 7/17/2011 CERTIFIED




PRO TECH PRODUCTS EC-100 ACRYLIC ELASTOMERIC COATING N/A N/A N/A N/A 7/25/2008 7/24/2013 CERTIFIED

SOMAY PRODUCTS, INC. ROOF MASTIC SEALER & PROTECTOR WHITE 842-01 N/A N/A N/A N/A 7/25/2008 7/24/2013 CERTIFIED




AGRICULTURAL OIL-BASED ARCHITECTURAL COATING (SEALER)


AGRICULTURAL OIL-BASED ROOF COATING (SEALER)

MULTIPURPOSE EPOXY TOP COAT.


HIGH SOLIDS ACRYLIC POLYURETHANE.


ELASTOMERIC ROOF PAINT


HIGH PERFORMANCE BONDING PRIMER.

WATER REDUCIBLE HIGH PERFORMANCE RUST INHIBITIVE PRIMER.

ACRYLIC-BASE EPOXY (SINGLE COMPONENT), INTERIOR, GLOSS ENAMEL, MULTI-SURFACES, WHITE & TINTS


ACRYLIC-BASE URETHANE (SINGLE COMPONENT), EXTERIOR, GLOSS ENAMEL, MULTI-SURFACES, WHITE AND TINTS.

PAGE 7

SUMMARY REPORT

PAINT PRODUCTS LABORATORY TEST AND EXPOSURE RESULTS BY LAB. NO. AS OF 9/8/2008Page 1

MP NO. ITEM DESCRIPTION LAB NO.DATE

CERTIFIED

EXPIRATION

DATESTATUS LAB TEST RESULTS EXPOSURE RESULTS

POSTED ON

FSPMA WEBSITE

DUE 2008 CONFIRMATION POSTING

FEES

DUE CERTIFICATION / RE-

CERTIFICATION FEES

5.6 ENAMEL, ALKYD, GLOSS P2086 6/24/1999 6/22/2004 EXPIRED PASSED RETEST WITH NEW PRIMER NO

6.7 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2087 FAILED ADHESION TEST AFTER 100 CYCLES AND PULL-OFF WITH 90 LB/IN2.

26.1 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2088

METAL PRIMER P2089

31.1 SOLVENT-BASE, EXTERIOR, FLAT, WOOD PRIMER. P2090 6/24/1999 6/22/2004 EXPIRED PASSED N/A NO

32.1 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2091

33.1 INT/EXT BLOCK FILLER P2092

3.8 VINYL LATEX EXTERIOR MASONRY PAINT P2093 PASSED

LATEX ACRYLIC PRIMER 330 P2094

27 ACRYLIC-BASE, GLOSS, EXTERIOR P2095 6/24/1999 6/22/2004 EXPIRED PASSED PASSED NO

29 ACRYLIC INTERIOR SATIN P2096

14PRIMER COATING, LATEX CONDITIONER FOR CHALKING

EXTERIOR SURFACESP2097

34 ANTI-SLIP, WATER BORNE P2098

6 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2099

27.1 ACRYLIC-BASE, GLOSS, EXTERIOR P2100 6/24/1999 6/22/2004 EXPIRED PASSED PASSED NO


2 ACRYLIC-BASE EXTERIOR, FLAT P2102 6/24/1999 6/22/2004 EXPIRED PASSED PASSED NO

26.1 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2103 6/24/1999 6/22/2004 EXPIRED PASSED PASSED NO

28.1 ACRYLIC SEMI-GLOSS ENAMEL P2104

29.1LATEX-ACRYLIC BASE, INTERIOR ENAMEL, SATIN-GLOSS,

WHITE AND TINTS. P2105

34 ACRYLIC FLOOR COATING P2106

3 VINYL LATEX EXTERIOR MASONRY PAINT P2107


EXTERIOR SURFACESP2108 6/17/1999 6/15/2004 EXPIRED PASSED N/A NO

21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2109

27 ACRYLIC-BASE, GLOSS, EXTERIOR P2110 6/24/1999 6/22/2004 EXPIRED PASSED, ADDED TO THE APPROVED LIST, ON EXPOSURE 2/8/01 - 02 "VERY GOOD" NO

28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2111

32 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2112 6/24/1999 6/22/2004 EXPIRED PASSED N/A NO

2.9 ACRYLIC-BASE EXTERIOR, FLAT P2113 6/24/1999 6/22/2004 EXPIRED PASSED PASSED NO

27.1 ACRYLIC-BASE, GLOSS, EXTERIOR P2114


28.1 INT/EXT S/G TRIM ENAMEL P2115

6.7 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2116 3/10/2000 3/9/2005 EXPIREDPASSED, RETAINED ON THE APPROVED LIST, REQUIRES EXPOSURE TEST

PASSED "VERY GOOD" RATING"VERY GOOD" NO

22 EXTERIOR-INTERIOR PRIMER/SEALER, ACRYLIC-BASE P2117

30 ACRYLIC-LATEX BASE, EXTERIOR, FLAT, WOOD PRIMER P2118

34 ACRYLIC ANTI-SLIP COATING P2119


27 ACRYLIC-BASE, GLOSS, EXTERIOR P2121

6 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2122 3/10/2000 3/9/2005 EXPIRED PASSED PASSED NO

26 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2123

MASONRY AND WOOD PRIMER P2124




27 ACRYLIC-BASE, GLOSS, EXTERIOR P2128 PASSED PASSED

28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2129 3/10/2000 3/9/2005 EXPIREDPASSED, RETAINED ON THE APPROVED LIST, ON EXPOSURE 2/8/01 -02

(MASONRY) RESULTS GOOD"GOOD" NO

29 LATEX SATIN ENAMEL P2130 3/10/2000 3/9/2005 EXPIRED PASSED N/A NO

33 LATEX BLOCK FILLER P2131

21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2132 5/11/1999 5/9/2004 EXPIRED PASSED PASSED NO

INT/EXT STEEL STRUCTURE P2133

EXTERIOR TOP COAT ROOFING P2134

EXTERIOR WATER & HUMIDITY RESISTANCE P2135

INT/EXT INDUSTRIAL SEALER P2136

INT/EXT FIRE PROOFING P2137

FOR CERAMIC COATING P2138



29 INTERIOR ACRYLIC SATIN WHITE P2140



21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2142 10/12/1999 10/10/2004 EXPIRED SAMPLE PASSES LAB TESTS AND WILL BE RETAINED ON APPROVED LIST "GOOD" NO


16TWO COMPONENT GLAZE, GLOSS & SEMI-GLOSS, WATER

BASE, FOR INTERIOR SURFACESP2144 10/12/1999 10/10/2004 EXPIRED PASSED N/A NO

PRIMER FOR MP 21 P2145

2 ACRYLIC-BASE EXTERIOR, FLAT P2146 PASSED N/A





BASE, FOR INTERIOR SURFACESP2149

21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2150 PASSED


24 STAIN, ACRYLIC-BASE, EXTERIOR, FLAT P2152

26 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2153 FAILED OPACITY


30 ACRYLIC-LATEX BASE, EXTERIOR, FLAT, WOOD PRIMER P2155 5/17/2004 5/16/2009WILL EXPIRE WITHIN NINE

MONTHSPASSED N/A YES OK

32 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2156



CERTIFIED

EXPIRATION


POSTED ON

FSPMA WEBSITE


FEES


CERTIFICATION FEES


BASE, FOR INTERIOR SURFACESP2157 10/12/1999 10/10/2004 EXPIRED PASSED N/A NO

26 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2158 3/10/2003 3/8/2008 EXPIREDPASSED, RETAINED ON THE APPROVED LIST, REQUIRES EXPOSURE TEST,

EXPOSED 2/8/01-2/8/02 P-2393 PASSED REQIRES EXPOSURE"VERY GOOD" NO

34 EXT/INT ANTI-SLIP WATER BORNE COATING P2159 1/11/2000 1/9/2005 EXPIRED PASSED N/A NO

ACRYLIC METAL PRIMER P2160

HOUSE PAINT ACRYLIC PRIMER P2161

HOUSE PAINT PRIMER P2162

ALKYD WOOD PRIMER P2163

ACRYLIC SEALER MASONRY P2164

ACRYLIC HOUSE PAINT PRIMER P2165

LATEX PRIMER COAT P2166




26 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2169 FAILED OPACITY

PRIMER FOR MP-21 P2170

29 SATIN LATEX ACRYLIC INT ENAMEL P2171


22 EXTERIOR-INTERIOR PRIMER/SEALER, ACRYLIC-BASE P2173 1/11/2000 1/9/2005 EXPIRED PASSED N/A NO

26 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2174 1/11/2000 1/9/2005 EXPIRED PASSED PASSED NO


30 ACRYLIC-LATEX BASE, EXTERIOR, FLAT, WOOD PRIMER P2176 12/21/1999 12/19/2004 EXPIRED PASSED NO


1 LATEX-BASE, INTERIOR, FLAT P2178 1/25/2000 1/23/2005 EXPIRED PASSED N/A NO

2 ACRYLIC-BASE EXTERIOR, FLAT P2179 1/25/2000 1/23/2005 EXPIRED PASSED LAB TESTS 1/25/2000 PASSED EXPOSURE WITH GOOD RATING 2/02 GOOD NO






ALKYD OIL PRIMER FOR MP 6 P2183

ALKYD METAL PRIMER FOR MP 26 P2184

6 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2200 FAILED EXTERIOR EXPOSURE ON WOOD REMOVED FROM APPROVED LIST PER

COMMITTEE VOTE 5/30/02"GOOD-FAIR"

21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2201 5/12/2000 5/11/2005 EXPIRED PASSED, ADDED TO THE APPROVED LIST "VERY GOOD" NO

22 EXTERIOR-INTERIOR PRIMER/SEALER, ACRYLIC-BASE P2202 PASSED FAIR


21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2206 5/12/2000 5/11/2005 EXPIRED PASSED, WILL BE RETAINED ON THE APPROVED LIST "GOOD" NO

24 STAIN, ACRYLIC-BASE, EXTERIOR, FLAT P2207

30 ACRYLIC-LATEX BASE, EXTERIOR, FLAT, WOOD PRIMER P2208 3/10/2000 3/9/2005 EXPIREDPASSED, RETAINED ON THE APPROVED LIST REQUIRES EXPOSURE TEST

(WOOD) RESULTS GOODN/A NO

38EXTERIOR/INTERIOR, ALKALI RESISTANT-STAIN BLOCK

UNIVERSAL PRIMER/SEALER, ACRYLIC-BASEP2208 8/7/2003 8/5/2008 EXPIRED

PASSED, RETAINED ON THE APPROVED LIST REQUIRES EXPOSURE TEST

(WOOD) RESULTS GOODN/A NO


ALIPHATIC ACRYLIC URETHANE FINISH P2210

ALIPHATIC ACRYLIC URETHANE ACTIVATOR P2211


LATEX SURFACE CONDITIONER P2213

WATER BASED URETHANE P2214

URETHANE HARDENER P2215

5 ENAMEL, ALKYD, GLOSS P2216


28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2218 5/12/2000 5/11/2005 EXPIREDPASSED, ADDED TO THE APPROVED LIST, ON EXPOSURE 2/8/01 - 02 "VERY

GOOD""VERY GOOD" NO

40ONE OR TWO COMPONENT ALIPHATIC POLYURETHANE

WATER BASED, ZERO VOC, OR VOC COMPLIANT,

ODORLESS

P2219 6/14/2001 6/13/2006 EXPIRED PASSED NO



28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2221 9/26/2000 9/25/2005 EXPIREDPASSED RETAINED ON APPROVED LIST 6/11/00, ON EXPOSURE 2/8/01 -

2/8/02"VERY GOOD" NO



3 VINYL LATEX EXTERIOR MASONRY PAINT P2224

39 LATEX-BASE, LOW ODOR, LOW VOC EGGSHELL, INTERIOR P2225 9/26/2000 9/25/2005 EXPIRED PASSED N/A NO

39 LATEX-BASE, LOW ODOR, LOW VOC EGGSHELL, INTERIOR P2226



UNIVERSAL PRIMER/SEALER, ACRYLIC-BASEP2228 2/12/2002 2/11/2007 EXPIRED PASSED N/A NO


6 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2230 9/26/2000 9/25/2005 EXPIRED PASSED WITH A "GOOD" RATING "GOOD" & VERY GOOD NO




6.9 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2234 FAILED, ON EXPOSURE 2/8/01 - 2/8/02 WITH P-2244 PRIMER "FAIR" RATING

REMOVED FROM APPROVED LIST

FAILED, ON EXPOSURE 2/8/01 -

2/8/02 WITH P-2244 PRIMER

"FAIR" RATING REMOVED FROM

APPROVED LIST



CERTIFIED

EXPIRATION


POSTED ON

FSPMA WEBSITE


FEES


CERTIFICATION FEES



29LATEX-ACRYLIC BASE, INTERIOR ENAMEL, SATIN-GLOSS,




24 STAIN, ACRYLIC-BASE, EXTERIOR, FLAT P2242 9/26/2000 9/25/2005 EXPIRED SAMPLE PASSES LAB TESTS & ADDED TO THE APPROVED LIST "GOOD" NO



PRIMER FOR

MP-6PRIMER FOR MP 6 P2244

PRIMER

FOR MP-24PRIMER FOR MP 24 P2245

2 ACRYLIC-BASE EXTERIOR, FLAT P2246 3/1/2001 2/28/2006 EXPIRED PASSED GOOD NO


EXTERIOR SURFACESP2247 3/1/2001 2/28/2006 EXPIRED

SAMPLE REQD. BY 10/19/00 (LET. SENT 3/00) REMOVED 12/11/00 - SAMPLE

RECD. 1/22/01 - PASSEDN/A NO


25ACRYLIC-BASE, PRIMER, EXTERIOR-INTERIOR, METAL

SURFACES, GRAYP2249 3/1/2001 2/28/2006 EXPIRED PASSED AND ADDED TO THE FSPMA APPROVED LIST N/A NO

26 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2250



WHITE AND TINTS. P2252 10/30/2001 10/29/2006 EXPIRED PASSED N/A NO


27 ACRYLIC-BASE, GLOSS, EXTERIOR P2254 3/22/2001 3/21/2006 EXPIREDSAMPLE REQUIRED BY 1/2/2001 - PASSED & ADDED TO THE FSPMA APPROVED

LISTGOOD (WOOD & MASONRY) NO

31 SOLVENT-BASE, EXTERIOR, FLAT, WOOD PRIMER. P2255




ODORLESS

P2257

FAILED IMPACT RESISTANCE TEST BECAUSE INTRUSION=40 IN-LB AND

EXTRUSION<40 IN-LB (IMPACT RESISTANCE >160 IN-LB FOR BOTH IS

REQUIRED)

N/A



ODORLESS

P2258 FAILED IMPACT RESISTANCE AND ADHESION TESTS N/A



ODORLESS

P2259



ODORLESS

P2260



ODORLESS

P2261 6/14/2001 6/13/2006 EXPIRED PASSED N/A NO

9 TRAFFIC PAINT, WATER EMULSION-BASED P2262 6/19/2001 6/18/2006 EXPIRED PASSED N/A NO

3 VINYL LATEX EXTERIOR MASONRY PAINT P2263 5/25/2001 5/24/2006 EXPIREDSAMPLE RECD. 5/31/00 FAILED 38.5% PIGMENT INSTEAD OF 30-36,

SECOND SAMPLE PASSEDVERY GOOD NO



UNIVERSAL PRIMER/SEALER, ACRYLIC-BASEP2265

27 ACRYLIC-BASE, GLOSS, EXTERIOR P2266 5/25/2001 5/24/2006 EXPIRED PASSED ADDED TO THE APPROVED LIST 5/25/01 VERY GOOD (MASONRY & WOOD) NO

3 VINYL LATEX EXTERIOR MASONRY PAINT P2267 6/5/2001 6/4/2006 EXPIREDSAMPLE REQUIRED BY 6/19/2001, 2ND. LETTER SENT 4/11/01 PASSED ADDED

TO THE APPROVED LISTVERY GOOD NO

PRIMER FOR

MP-3EXT ACRYLIC PRIMER P2268

9 TRAFFIC PAINT, WATER EMULSION-BASED P2269 6/26/2001 6/25/2006 EXPIRED PASSED N/A NO




SURFACES, GRAYP2271



31 SOLVENT-BASE, EXTERIOR, FLAT, WOOD PRIMER. P2273 6/22/2001 6/21/2006 EXPIRED PASSED N/A NO



2 ACRYLIC-BASE EXTERIOR, FLAT P2276 7/23/2001 7/22/2006 EXPIRED PASSED ADDED TO THE FSPMA APPROVED LIST VERY GOOD NO

WOOD

PRIMERWOOD PRIMER P2277

WOOD

PRIMERWOOD PRIMER P2278






21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2283 6/22/2001 6/21/2006 EXPIRED PASSED ADDED TO THE FSPMA APPROVED LIST VERY GOOD NO

28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2284 7/31/2001 7/30/2006 EXPIRED 2 ND SAMPLE PASSED LAB TESTS GOOD ( MASONRY & WOOD ) NO

30 ACRYLIC-LATEX BASE, EXTERIOR, FLAT, WOOD PRIMER P2285 7/12/2001 7/11/2006 EXPIRED 2 ND SAMPLE PASSED LAB TESTS N/A NO

1.8 LATEX-BASE, INTERIOR, FLAT P2286 8/13/2001 8/12/2006 EXPIRED PASSED N/A NO

2.9 ACRYLIC-BASE EXTERIOR, FLAT P2287 8/1/2001 7/31/2006 EXPIRED PASSED ADDED TO FSPMA APPROVED LIST VERY GOOD NO

4.5 INTERIOR, ALKYD, SEMI-GLOSS P2288 N/A


5.6 ENAMEL, ALKYD, GLOSS P2290

7.6PRIMER COATING, CONDITIONER FOR CHALKING EXTERIOR

SURFACES, ALKYD BASEP2291

14.1PRIMER COATING, LATEX CONDITIONER FOR CHALKING




CERTIFIED

EXPIRATION


POSTED ON

FSPMA WEBSITE


FEES


CERTIFICATION FEES

27.1 ACRYLIC-BASE, GLOSS, EXTERIOR P2293

28.2 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2294

32.1 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2295 8/24/2001 8/23/2006 EXPIRED PASSED N/A NO

36INTERIOR-EXTERIOR CORROSION RESISTANT, WATER

BASED, DIRECT-TO-METAL, SEMI-GLOSS, ENAMELP2296 8/2/2001 8/1/2006 EXPIRED PASSED ADDED TO FSPMA APPROVED LIST GOOD (WITH & W/O PRIMER) NO



ADHESION

PRIMERADHESION PROMOTING PRIMER P2299

PRIMER LATEX PRIMER/SEALER P2300

PRIMER STAIN, KILLER P2301

PRIMER ALL PURPOSE 100% ACRYLIC PRIMER P2302



5.6 ENAMEL, ALKYD, GLOSS P2305



PRIMER FOR

MP-3.8ACRYLIC SEALER PRIMER P2307

PRIMER WOOD ACRYLIC PRIMER P2308

PRIMER FOR

MP-27.1MASONRY ACRYLIC PRIMER P2309

9 TRAFFIC PAINT, WATER EMULSION-BASED P2310


SURFACES, GRAYP2311

35 ACRYLIC GLOSS DTM P2312

TEXTURE PAINT P2313

27 ACRYLIC-BASE, GLOSS, EXTERIOR P2314 9/17/2001 9/16/2006 EXPIRED FAILED CRATERS IN FILM 2ND SAMPLE PASSEDVERY GOOD ( MASONRY) GOOD

(WOOD)NO






TEXTURE PAINT P2319


4.5 INTERIOR, ALKYD, SEMI-GLOSS P2321 12/7/2001 12/6/2006 EXPIRED PASSED N/A NO


5.6 ENAMEL, ALKYD, GLOSS P2323 FAILED VISCOSITY (96 N0T 73-93) 2ND SAMPLE FAILED VISCOSITY 98 NOT 73-

93 retest p2305 failed 98- " RETEST P-2323 PASSED "FAIR (MASONRY & WOOD)

28.1 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2324 10/30/2001 10/29/2006 EXPIREDFAILED REFLECTANCE 84 INSTEAD OF 87 MINIMUM 2ND SAMPLE FAILED

REFLECT. 84.2 NOT 87 MIN. " 3RD SAMPLE PASSED "

VERY GOOD (MASONRY) GOOD

(WOOD)NO


SURFACES, GRAYP2325

30 ACRYLIC-LATEX BASE, EXTERIOR, FLAT, WOOD PRIMER P2326 12/19/2001 12/18/2006 EXPIRED PASSED N/A NO

33 ANTI-SLIP COATING P2327 12/9/2001 12/8/2006 EXPIRED PASSED N/A NO

28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2328 FAILED TOTAL SOLIDS BY WEIGHT, 38.6% INSTEAD OF 41%

SURFACE CONDITIONER PRIMER P2329


26 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2331 1/9/2002 1/8/2007 EXPIRED SAMPLE SUBMITTED , PASSED AND ADDED TO APPROVED LISTGOOD-FAIR (WITH PRIMER) GOOD

(W/O PRIMER)NO

27 ACRYLIC-BASE, GLOSS, EXTERIOR P2332 12/19/2001 12/18/2006 EXPIRED PASSEDVERY GOOD (MASONRY) GOOD

(WOOD)NO


28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2334 4/22/2003 4/20/2008 EXPIRED PASSEDVERY GOOD (MASONRY) GOOD

(WOOD)NO

PRIMER FOR

MP-28PRIMER/SEALER P2335

VERY GOOD (MASONRY) GOOD

(WOOD)




SURFACES, GRAYP2337 1/11/2002 1/10/2007 EXPIRED PASSED N/A NO

26 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2338 1/11/2002 1/10/2007 EXPIREDSAMPLE REQUIRED BY 12/10/2001, 2ND LETTER SENT 4/11/01 PASSED ADDED

TO LISTGOOD NO

PRIMER FOR

MP-26 & MP-

36

ALKYD METAL PRIMER P2339 SAMPLE REQUIRED BY 12/10/2001, 2ND LETTER SENT 4/11/01 PASSED ADDED

TO LISTGOOD

4.5 INTERIOR, ALKYD, SEMI-GLOSS P2340 2/7/2002 2/6/2007 EXPIRED PASSED N/A NO








UNIVERSAL PRIMER/SEALER, ACRYLIC-BASEP2345 7/6/2002 7/5/2007 EXPIRED PASSED N/A NO





EGGSHELL P2348







CERTIFIED

EXPIRATION


POSTED ON

FSPMA WEBSITE


FEES


CERTIFICATION FEES




34 EXTERIOR/INTERIOR, ANTI-SLIP, WATER BORNE COATING P2354 5/16/2002 5/15/2007 EXPIRED PASSED N/A NO

PRIMER FOR

MP-34ACRYLIC PRIMER P2355

2 ACRYLIC-BASE EXTERIOR, FLAT P2356 N/A

34 EXTERIOR/INTERIOR, ANTI-SLIP, WATER BORNE COATING P2357 5/24/2002 5/23/2007 EXPIRED PASSED N/A NO

PRIMER FOR

MP-34ELASTOMERIC SEALER P2358 N/A N/A

42FLAME CONTROL NO. 40-40 LOW GLOSS LATEX (CLASS

"B") FIRE RESISTANT PAINT P2359 N/A N/A













2 ACRYLIC-BASE EXTERIOR, FLAT P2366 5/10/2002 5/9/2007 EXPIRED P-2356 FAILED VISCOSITY 101 KU NOT 81 - 100 KU, P-2366 PASSED PASSED NO

PROPOSED TEXTURED PAINT P2367 N/A N/A

44ACRYLIC BASE INTERIOR TEXTURED COATING AGGREGATE

AND NON-AGGREGATEP2368 2/20/2003 2/19/2008 EXPIRED N/A N/A NO

PROPOSED TEXTURED PAINT P2369 N/A N/A

6 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2370 5/24/2002 5/23/2007 EXPIRED PASSED PASSED NO

21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2371 6/19/2002 6/18/2007 EXPIRED PASSED PASSED NO


EXTERIOR SURFACESP2372 6/19/2002 6/18/2007 EXPIRED N/A N/A NO


UNIVERSAL PRIMER/SEALER, ACRYLIC-BASEP2373 N/A N/A








33 BLOCK FILLER, LATEX-BASE, INTERIOR/EXTERIOR P2378 7/8/2002 7/7/2007 EXPIRED PASSED N/A NO

PRIMER FOR

MP-2PRIMER FOR MP-2 P2379 PRIMER PRIMER


PRIMER FOR

MP-2PRIMER FOR MP-2 P2381 PRIMER PRIMER

6 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2382 N/A N/A



6.7 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2385 9/18/2002 9/17/2007 EXPIRED PASSED PASSED NO

PRIMER FOR

MP-6ADHESION PRIMER P2386 PASSED PRIMER

WOOD

PRIMERWOOD PRIMER P2387 PASSED PRIMER

MASONRY

PRIMERMASONRY PRIMER P2388 PASSED PRIMER


AND NON-AGGREGATEP2390 2/20/2003 2/19/2008 EXPIRED PASSED N/A NO

6 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2391 FAILED GLOSS, VISCOSITY & REFLEC.


AND NON-AGGREGATEP2392 2/20/2003 2/19/2008 EXPIRED PASSED N/A NO

26 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2393 3/13/2003 3/11/2008 EXPIRED PASSEDVERY GOOD, PASSED (STEEL

PANEL)NO

27 ACRYLIC-BASE, GLOSS, EXTERIOR P2394 FAILED , VISCOSITY N/A

28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2395 3/13/2003 3/11/2008 PASSEDMASONRY: GOOD-FAIR, FAILED;

WOOD: FAIR, FAILEDNO

33 BLOCK FILLER, LATEX-BASE, INTERIOR/EXTERIOR P2396 FAILED , NONVOL. 6.1 NOT 6.3 MIN.


BASED, DIRECT-TO-METAL, SEMI-GLOSS, ENAMELP2397 3/13/2003 3/11/2008 EXPIRED PASSED

VERY GOOD, PASSED (STEEL

PANEL)NO

37INTERIOR/EXTERIOR CORROSION RESISTANT, WATER

BASED, PRIMER P2398 FAILED NONVOL VEHICLE & VISCOSITY N/A

6 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2399 2/12/2003 2/11/2008 EXPIRED PASSEDMASONRY:GOOD, PASSED; WOOD:

GOOD, PASSEDNO


AND NON-AGGREGATEP2400 5/6/2003 5/4/2008 EXPIRED FAILED VISCOSITY & SCRUB RESIST. 2nd sample passed N/A NO



45ACRYLIC BASE EXTERIOR TEXTURED COATING AGGREGATE




CERTIFIED

EXPIRATION


POSTED ON

FSPMA WEBSITE


FEES


CERTIFICATION FEES

PRIMER FOR

MP-6EXTERIOR ACRYLIC LATEX PRIMER P2403

26 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2404 PASSED N/A

PATCHING COMPOUND P2405 % SOLIDS 63.8 NOT 67.3 PER LIGHTHOUSE SPECS N/A


EXTERIOR SURFACESP2406 4/29/2003 4/27/2008 EXPIRED PASSED AND ADDED TO FSPMA APPROVED LIST N/A NO

21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2407 PASSED AND ADDED TO FSPMA APPROVED LIST GOOD-FAIR, FAILED

28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2408 FAILED REFLECTANCE 80.5 NOT 87 MIN.

32 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2409 5/1/2003 4/29/2008 EXPIRED PASSED AND ADDED TO FSPMA APPROVED LIST N/A NO


BASED DIRECT-TO-METAL GLOSS ENAMELP2410 FAILED VISCOSITY 75 NOT 77-111

PRIMER FOR

MP-35DTM PRIMER P2411

PRIMER FOR

MP-26 & MP-

36

DTM PRIMER P2412

33 BLOCK FILLER, LATEX-BASE, INTERIOR/EXTERIOR P2413 5/1/2003 4/29/2008 EXPIRED PASSED AND RETAINED ON THE FSPMA APPROVED LIST N/A NO

37INTERIOR/EXTERIOR CORROSION RESISTANT, WATER

BASED, PRIMER P2414 FAILED NONVOLATILE VEEHICLE, % BY WT. OF PRIMER 3.2 NOT 20 MIN.

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2415 6/2/2003 5/31/2008 EXPIRED PASSED (RETEST FOR 2328)MASONRY:GOOD, PASSED; WOOD:

FAIR, FAILEDNO

PRIMER FOR

MP-28EXTERIOR ACRYLIC PRIMER P2416

27 ACRYLIC-BASE, GLOSS, EXTERIOR P2417 7/2/2003 6/30/2008 EXPIRED PASSED (RETEST FOR 2394)MASONRY: GOOD, PASSED;

WOOD: VERY GOOD, PASSEDNO

46

(PROPOSED)UV CLEARCOAT P2419

RED ACRYLIC: GOOD, RED ALKYL:

GOOD, BLUE ALKYL: GOOD, BLUE

ACRYLIC: GOOD

46

(PROPOSED)UV CLEARCOAT P2420

BLUE ACRYLIC: GOOD, RED

ALKYL: GOOD, BLUE ALKYL:

GOOD, RED ACRYLIC: VERY GOOD

46

(PROPOSED)UV CLEARCOAT P2421 GOOD

46

(PROPOSED)UV CLEARCOAT P2422 GOOD

46

(PROPOSED)UV RESISTANT CLEAR COAT P2428

BLUE ACRYLIC: GOOD, RED

ALKYL: GOOD, BLUE ALKYL:

GOOD FAIR, RED ACRYLIC: GOOD

FAIR

28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2429 PASSED


BASED DIRECT-TO-METAL GLOSS ENAMELP2430 11/24/2003 11/22/2008

WILL EXPIRE WITHIN SIX

MONTHSPASSED PASSED W/ P-2431 (STEEL-GOOD) YES FSPMA CONFIRMATION FEES DUE

PRIMER FOR


28 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2432 1/20/2004 1/18/2009WILL EXPIRE WITHIN SIX

MONTHSPASSED

PASSED W/ P-2437 (MASONRY-

GOOD, WOOD-GOOD)YES FSPMA CONFIRMATION FEES DUE

2 ACRYLIC-BASE EXTERIOR, FLAT P2433 FAILED PIGMENT % BY WEIGHT, 43.2% INSTEAD OF < 38%

27 ACRYLIC-BASE, GLOSS, EXTERIOR P2434 2/4/2004 2/2/2009WILL EXPIRE WITHIN SIX

MONTHSPASSED

PASSED W/ P-2436 (MASONRY-

VERY GOOD, WOOD-VERY GOOD)YES OK

33 BLOCK FILLER, LATEX-BASE, INTERIOR/EXTERIOR P2435 2/4/2004 2/2/2009WILL EXPIRE WITHIN SIX

MONTHSPASSED N/A YES OK

PRIMER FOR

MP-27INT/EXT PRIMER FOR MP-27 P2436

PRIMER FOR



BASE, FOR INTERIOR SURFACESP2438 FAILED TOTAL SOLIDS BY WEIGHT, 44.7% INSTEAD OF 48 - 57%

21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2439 7/15/2004 7/14/2009WILL EXPIRE WITHIN ONE

YEARPASSED

MANSONRY: VERY GOOD PASSED

(W/2454)NO FSPMA CONFIRMATION FEES DUE

24 STAIN, ACRYLIC-BASE, EXTERIOR, FLAT P2440 4/26/2004 4/25/2009WILL EXPIRE WITHIN NINE

MONTHSPASSED

WOOD: VERY GOOD PASSED

(W/2453)YES OK

30 ACRYLIC-LATEX BASE, EXTERIOR, FLAT, WOOD PRIMER P2441 PASSED


EXTERIOR SURFACESP2442 FAILED VISCOSITY, 65 KU INSTEAD OF 79 +/- 10 KU AFTER 24 DAYS AT 1200F


EXTERIOR SURFACESP2443 FAILED VISCOSITY, 62 KU INSTEAD OF 68-102 KU

27.1 ACRYLIC-BASE, GLOSS, EXTERIOR P2444 FAILED STORAGE STABILITY (VISCOSITY=140 KU INSTEAD OF 104 [ORIGINAL

VISCOSITY]+/- 10 KU AFTER 14 DAYS AT 1200F)N/A

30 ACRYLIC-LATEX BASE, EXTERIOR, FLAT, WOOD PRIMER P2445 7/15/2004 7/14/2009WILL EXPIRE WITHIN ONE

YEARPASSED N/A NO OK


EXTERIOR SURFACESP2446 7/15/2004 7/14/2009

PASSED ( THE VENDOR NEVER SENT POSTING FEES. SAMPLE WOULD HAVE TO

BE RE-SUBMITTED IN THE FUTURE FOR CERTIFICATION. )N/A NO

21 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2447 7/15/2004 7/14/2009WILL EXPIRE WITHIN ONE

YEAR

PASSED ( THE VENDOR NEVER SENT POSTING FEES. SAMPLE WOULD HAVE TO

BE RE-SUBMITTED IN THE FUTURE FOR CERTIFICATION. )

MANSONRY: GOOD PASSED

(W/2448)NO FSPMA CONFIRMATION FEES DUE

PRIMER FOR

MP-21ACRYLIC LATEX PRIMER P2448


EXTERIOR SURFACESP2449 7/29/2004 7/28/2009

WILL EXPIRE WITHIN ONE

YEARPASSED YES OK



6.9 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2451 9/1/2004 8/31/2009WILL EXPIRE WITHIN ONE

YEARPASSED

MANSONRY: VERY GOOD PASSED

(W/2456); WOOD: GOOD /FAIR

FAILED (W/2455)

YES OK





CERTIFIED

EXPIRATION


POSTED ON

FSPMA WEBSITE


FEES


CERTIFICATION FEES

PRIMER FOR

MP-24EXTERIOR ACRYLIC LATEX PRIMER P2453

PRIMER FOR

MP-21SURFACE CONDITIONER P2454

PRIMER FOR

MP-6EXTERIOR ACRYLIC BONDING PRIMER P2455

PRIMER FOR

MP-6ACRYLIC SEALER MASONRY PRIMER P2456

28.2 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2457 7/28/2005 7/27/2010 CERTIFIED PASSEDMASONRY: VERY GOOD, PASSED;

WOOD: GOOD, PASSEDYES OK

PRIMER FOR

MP-28EXTERIOR OIL UNDERCOATER P2458

PRIMER FOR

MP-28EXTERIOR ACRYLIC PRIMER P2459

6.1 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2460 8/15/2005 8/14/2010 CERTIFIED PASSEDMASONRY: VERY GOOD, PASSED;

WOOD: GOOD, PASSEDYES FSPMA CONFIRMATION FEES DUE

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2460 8/15/2005 8/14/2010 CERTIFIED PASSEDMASONRY: VERY GOOD, PASSED;

WOOD: GOOD, PASSEDYES FSPMA CONFIRMATION FEES DUE

7.6PRIMER COATING, CONDITIONER FOR CHALKING EXTERIOR

SURFACES, ALKYD BASEP2461

FAILED STORAGE STABILITY (VISCOSITY=100 KU INSTEAD OF 87 [ORIGINAL

VISCOSITY]+/- 10 KU AFTER 14 DAYS AT 1200F) AND PIGMENT CONTENT (53%

> 36-45% ACCETABLE RANGE )



FAILED NON-VOLATILE VEHICLE (27% >13-19 % ACCEPTABLE RANGE) AND

PIGMENT CONTENT (34% ABOVE THE 12-18% ACCETABLE RANGE )

21.2 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2463 8/15/2005 8/14/2010 PASSED FAILED EXTERIOR EXPOSURE NO FSPMA CONFIRMATION FEES DUE


BASED DIRECT-TO-METAL GLOSS ENAMELP2464 7/28/2005 7/27/2010 CERTIFIED PASSED STEEL: VERY GOOD, PASSED YES FSPMA CONFIRMATION FEES DUE

6.9 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2465

FAILED VISCOCITY (103 K.U.>71-96 ACCEPTABLE RANGE), STORAGE

STABILITY (VISCOSITY=115 K.U. INSTEAD OF 103[ORIGINAL VISCOSITY]+/- 10

KU AFTER 14 DAYS AT 1200F) AND ADHESION

6.10 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2466 9/6/2005 9/5/2010 CERTIFIED PASSEDPASSED CONCRETE: VERY GOOD;

FAILED WOOD [FAIR]YES OK

21.2 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2467 9/6/2005 9/5/2010 PASSED FAILED EXTERIOR EXPOSURE NO FSPMA CONFIRMATION FEES DUE

27.1 ACRYLIC-BASE, GLOSS, EXTERIOR P2468 FAILED STORAGE STABILITY (VISCOSITY=140 K.U. INSTEAD OF 102[ORIGINAL

VISCOSITY]+/- 10 KU AFTER 14 DAYS AT 1200F)

47 MOLD AND MILDEW PROOF ACRYLIC PAINT P2469

FAILED FLASH POINT (157 0F INSTEAD OF >200 0F AS SPECIFIED) AND

STORAGE STABILITY AFTER 14 DAYS AT 120 0F (97 K.U. INSTEAD OF 83

[INITIAL VISCOSITY] +/- 10 K.U. AS SPECIFIED). MICRO TESTS PENDING TO

PROPOSED CHANGES IN UPCOMING FSPMA MEETING.



STORAGE STABILITY AFTER 14 DAYS AT 120 0F (99 K.U. INSTEAD OF 83

[INITIAL VISCOSITY] +/- 10 K.U. AS SPECIFIED). MICRO TESTS PENDING TO

PROPOSED CHANGES IN UPCOMING FSPMA MEETING.



STORAGE STABILITY AFTER 14 DAYS AT 120 0F BECAUSE THE SAMPLE HAD

CAKE CONSISTENCY. MICRO TESTS PENDING TO PROPOSED CHANGES IN

UPCOMING FSPMA MEETING.

PRIMER FOR

MP-21, MP-

28, AND MP-

6

PRIMER FOR MP-21 AND MP-6 P2472

27.1 ACRYLIC-BASE, GLOSS, EXTERIOR P2473 9/27/2005 9/26/2010 PASSEDFAILED IN CONCRETE [GOOD-

FAIR] AND WOOD [GOOD-FAIR]NO FSPMA CONFIRMATION FEES DUE

21.2 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2474 11/16/2005 11/15/2010 CERTIFIED PASSED CONCRETE-VERY GOOD NO FSPMA CONFIRMATION FEES DUE

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2475 11/16/2005 11/15/2010 CERTIFIED PASSEDPASSED CONCRETE [VERY GOOD]

AND WOOD [VERY GOOD].YES FSPMA CONFIRMATION FEES DUE OK

32.1 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2476 FAILED ADHESION TEST / PULL-OFF WITH 58 LB/IN2 (SPECIFIED: 100 LB/IN2) N/A

PRIMER FOR MP-21 AND MP-28 P2477

WOOD PRIMER FOR MP-27 P2478

47 MOLD AND MILDEW PROOF ACRYLIC PAINT P2479 2/15/2006 2/14/2011 CERTIFIED PASSED YES OK OK



PRIMER FOR MP-32 P2482

32.1 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2483 2/15/2006 2/14/2011 CERTIFIED PASSED YES FSPMA CONFIRMATION FEES DUE OK

38.1EXTERIOR/INTERIOR, ALKALI RESISTANT-STAIN BLOCK


FAILED BECAUSE: A) THE PRIMER FAILED TO BLOCK THE FOLLOWING STAINS:

BLUE MARK-A-LOT, GREEN MARK-A-LOT, RED MARK-A-LOT, RED SHARPIE,

BLACK PRECISE VERY FINE PEN AND RED PRECISE VERY FINE PEN, AND B) THE

ALKALI RESISTANCE TEST SHOWED LIGHT BLISTERING.

52 HIGH PERFORMANCE BONDING PRIMER P2484 7/18/2006 7/17/2011 CERTIFIED PASSED YES OK OK

53.1WATER REDUCIBLE HIGH PERFORMANCE RUST INHIBITIVE

PRIMERP2484 7/18/2006 7/17/2011 CERTIFIED PASSED YES OK OK

48.1 EPOXY BASED RUST-PENETRATING PRE-PRIMER P2485 7/18/2006 7/17/2011 CERTIFIED PASSED YES OK OK

52 HIGH PERFORMANCE BONDING PRIMER. P2486 7/18/2006 7/17/2011 CERTIFIED PASSED YES OK OK


PRIMER. P2487

FAILED VISCOSITY WITH 80 K.U. INSTEAD OF 85-110 K.U. ACCEPTANCE

RANGE.


PRIMER. P2488 7/18/2006 7/17/2011 CERTIFIED PASSED YES OK OK

3.8 VINYL LATEX EXTERIOR MASONRY PAINT P2489 9/5/2006 9/4/2011 CERTIFIED PASSED MASONRY:GOOD, PASSED YES OK OK

9.4 TRAFFIC PAINT, WATER EMULSION-BASED P2490 FAILED OPACITY (5 MILS WET) WITH 0.93 INSTEAD OF THE SPECIFIED 0.95

AND THE ALKALI RESISTANCE TEST BECAUSE IT SHOWED BLISTERING.

21.2 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2491 9/5/2006 9/4/2011 CERTIFIED PASSED MASONRY:VERY GOOD, PASSED NO FSPMA CONFIRMATION FEES DUE

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2492 9/21/2006 9/20/2011 CERTIFIED PASSEDMASONRY:FAIR, FAILED; WOOD:

FAIR, FAILEDNO FSPMA CONFIRMATION FEES DUE

39.2 LATEX-BASE, LOW ODOR, LOW VOC EGGSHELL, INTERIOR P2493 9/5/2006 9/4/2011 CERTIFIED PASSED YES OK OK



CERTIFIED

EXPIRATION


POSTED ON

FSPMA WEBSITE


FEES


CERTIFICATION FEES


WHITE AND TINTS. P2493 9/21/2006 9/20/2011 CERTIFIED PASSED YES OK OK

30.1 ACRYLIC-LATEX BASE, EXTERIOR, FLAT, WOOD PRIMER P2494 FAILED VISCOSITY, 123 KU INSTEAD OF 68-111 KU

31.1 SOLVENT-BASE, EXTERIOR, FLAT, WOOD PRIMER. P2495 9/21/2006 9/20/2011 CERTIFIED PASSED YES OK OK

32.2 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2496 9/21/2006 9/20/2011 CERTIFIED PASSED YES OK OK

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2497 9/21/2006 9/20/2011 CERTIFIED PASSEDMASONRY:FAIR, FAILED; WOOD:

FAIR, FAILEDNO FSPMA CONFIRMATION FEES DUE


2.9 ACRYLIC-BASE EXTERIOR, FLAT P2499 9/5/2006 9/4/2011 CERTIFIED PASSED MASONRY:GOOD, PASSED YES FSPMA CONFIRMATION FEES DUE OK


EXTERIOR SURFACESP2500 9/5/2006 9/4/2011 CERTIFIED PASSED YES OK OK


FAILED ADHESION TEST WITH A PULL-OFF OF 100 PSI INSTEAD OF SPECIFIED

MINIMUM OF 135 PSI AS PER THE MP-26.4 VERSION APPROVED ON THE

AUGUST 2006 MEETING. VENDOR WILL SUBMITT FOR TESTING AT NO CHARGE

ANOTHER PRODUCT FOR THIS SAME CATEGORY [SEE MINUTES

CORRESPONDING TO THE SEPTEMBER 2006 COMMITTEE MEETING - L-1181

FOR AGREEMENT.]

1.8 LATEX-BASE, INTERIOR, FLAT P2502 9/5/2006 9/4/2011 CERTIFIED PASSED YES FSPMA CONFIRMATION FEES DUE OK

25.1ACRYLIC-BASE, PRIMER, EXTERIOR-INTERIOR, METAL

SURFACES, GRAYP2503

FAILED TOTAL SOLIDS (62.9 % DOES NOT FALL INTO THE 50-55%

ACCEPTANCE RANGE) AND STORAGE STABILITY (VISCOSITY=98 KU INSTEAD

OF 81 [ORIGINAL VISCOSITY]+/- 10 KU AFTER 14 DAYS AT 1200F)

26.4 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2504 9/21/2006 9/20/2011 CERTIFIED PASSED STEEL:GOOD-FAIR, FAILED NO FSPMA CONFIRMATION FEES DUE

27.2 ACRYLIC-BASE, GLOSS, EXTERIOR P2505 9/5/2006 9/4/2011 CERTIFIED PASSED MASONRY:GOOD, PASSED YES FSPMA CONFIRMATION FEES DUE OK

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2506 9/21/2006 9/20/2011 CERTIFIED PASSEDMASONRY:GOOD, PASSED; WOOD:

GOOD-FAIR, FAILEDYES FSPMA CONFIRMATION FEES DUE OK


ADHESION RESULTS: ON STEEL: 25 PSI < 100 PSI; ON ALKYD: 195 > 100 PSI.

MT&E AND BROWARD WILL PROPOSE ON THE FSPMA AUG 2006 COMM

MEETING TO REMOVE THE ALKYD REQUIREMENT FROM MP-26 AND TO

INCREASE THE ACCEPT. CRITERIUM TO >130 PSI


ADHESION RESULTS: ON STEEL: 105 PSI > 100; ON ALKYD: 105 > 100 PSI.





ADHESION RESULTS: ON STEEL: 105 PSI > 100; ON ALKYD: 105 > 100 PSI.





EXTERIOR SURFACESP2510 9/20/2006 9/19/2011 CERTIFIED PASSED YES FSPMA CONFIRMATION FEES DUE OK


ADHESION RESULTS: ON STEEL: 145 PSI > 100; ON ALKYD: 75< 100 PSI. MT&E

AND BROWARD WILL PROPOSE ON THE FSPMA AUG 2006 COMM MEETING TO

REMOVE THE ALKYD REQUIREMENT FROM MP-26 AND TO INCREASE THE

ACCEPT. CRITERIUM TO >130 PSI


ADHESION RESULTS: ON STEEL: 185 PSI > 100 PSI; ON ALKYD: 80 < 100 PSI.




22.2 EXTERIOR-INTERIOR PRIMER/SEALER, ACRYLIC-BASE P2513 FAILED STORAGE STABILITY AFTER 14 DAYS AT 120 0C BECAUSE SAMPLE

DEVELOPED A CAKE-LIKE TEXTURE DURING THE STABILITY TEST.

PRIMER FOR

MP-27PRIMER FOR MP-27 P2514 PRIMER FOR MP-27 SUBMITTED FOR EXPOSURE TESTING

26.3 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2515 PASSED

26.3 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2516 PASSED

30.1 ACRYLIC-LATEX BASE, EXTERIOR, FLAT, WOOD PRIMER P2517 10/9/2006 10/8/2011 CERTIFIED PASSED YES OK OK

22.2 EXTERIOR-INTERIOR PRIMER/SEALER, ACRYLIC-BASE P2518

FAILED - THE % OF PIGMENT BY WT. OF PAINT IS 25% AND A MINIMUM OF 32%

IS REQUIRED. THE WEIGHT PER GALLON OF PAINT IS 10.3 LB AND A MINIMUM

OF 11.1 IS REQUIRED. THE REFLECTANCE IS 86 AND 90 IS REQUIRED.


WHITE AND TINTS. P2519 FAILED - 60 0 SPECULAR GLOSS IS 56 AND THE SPECIFIED RANGE IS 10-30.

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2520 12/21/2006 12/20/2011 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK OK


EXTERIOR SURFACESP2521 11/5/2006 11/4/2011 CERTIFIED PASSED YES OK OK

22.2 EXTERIOR-INTERIOR PRIMER/SEALER, ACRYLIC-BASE P2522 11/28/2006 11/27/2011 CERTIFIED PASSED YES OK OK

27.2 ACRYLIC-BASE, GLOSS, EXTERIOR P2523 12/5/2006 12/4/2011 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK OK


WHITE AND TINTS. P2524 12/12/2006 12/11/2011 CERTIFIED PASSED YES OK OK



2.9 ACRYLIC-BASE EXTERIOR, FLAT P2527 3/8/2007 3/6/2012 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK OK

32.2 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2528 FAILED - STORAGE STABILITY TEST: CAKE-LIKE


SURFACES, GRAYP2529 3/8/2007 3/6/2012 CERTIFIED PASSED YES OK OK

26.4 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2530 3/8/2007 3/6/2012 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK OK


UNIVERSAL PRIMER/SEALER, ACRYLIC-BASEP2531 FAILED - STAIN BLOCK TEST

22.2 EXTERIOR-INTERIOR PRIMER/SEALER, ACRYLIC-BASE P2532

FAILED - WEIGHT PER GALLON OF PAINT IS 10.3 LB INSTEAD OF THE

REQUIRED >11.1 LB AND THE REFLECTANCE IS 85.2 INSTEAD OF THE

REQUIRED 90.


WHITE AND TINTS. P2533 3/8/2007 3/6/2012 CERTIFIED PASSED YES FSPMA CONFIRMATION FEES DUE OK


SURFACES, GRAYP2534

FAILED STORAGE STABILITY AFTER 14 DAYS AT 120 0C BECAUSE THE

VISCOSITY WAS 111 KU AND A MAXIMUM OF 103 KU (ORIGINAL VISCOSITY 93

+/- 10 KU) WAS SPECIFIED. ALSO THE TOTAL SOLIDS % BY WT OF PRIMER WAS

63% AND THE ACCEPTABLE RANGE IS 50-55.

P2535




CERTIFIED

EXPIRATION


POSTED ON

FSPMA WEBSITE


FEES


CERTIFICATION FEES

2.9 ACRYLIC-BASE EXTERIOR, FLAT P2537 5/1/2007 4/29/2012 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK OK

6.10 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2538 5/1/2007 4/29/2012 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK OK



FAILED: 1-NONVOLATILE VEHICLE, % BY WT. OF VEHICLE, 22.1% OUTSIDE

THE ACCEPTABLE 13-19 RANGE, 2-PIGMENT % BY WT. OF PAINT, 36%

OUTSIDE THE 12-18 ACCEPTABLE RANGE, AND 3- STORAGE STABILITY AFTER

14 DAYS AT 120 0C BECAUSE THE VISCOSITY WAS 128 KU AND A MAXIMUM OF

110 KU (ORIGINAL VISCOSITY 100 +/- 10 KU) WAS SPECIFIED.

26.3 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2540FAILED: 1- 600 SPECULAR GLOSS WAS 51 AND >61 IS SPECIFIED, AND 2-

REFLECTANCE WAS 80 AND 84 IS SPECIFIED.

27.2 ACRYLIC-BASE, GLOSS, EXTERIOR P2541FAILED VISCOSITY WAS 114 KU AND A 77-111 KU ACCEPTABLE RANGE IS

SPECIFIED.

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2542 5/1/2007 4/29/2012 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK OK




FAILED: 1-ALKALI RESISTANCE, AND 2- STAIN BLOCK TEST. NOTE: APPLYING

TWO COATS OF MP-38 AND TWO COATS OF TOP COAT MP-1.8 ON DRY WALL

PANELS.

39.2 LATEX-BASE, LOW ODOR, LOW VOC EGGSHELL, INTERIOR P2545 5/1/2007 4/29/2012 CERTIFIED PASSED YES OK OK


UNIVERSAL PRIMER/SEALER, ACRYLIC-BASEP2546 4/20/2007 4/18/2012 CERTIFIED PASSED YES OK OK

1.8 LATEX-BASE, INTERIOR, FLAT P2547 N/A

27.2 ACRYLIC-BASE, GLOSS, EXTERIOR P2548 5/1/2007 4/29/2012 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK OK

47 MOLD AND MILDEW PROOF ACRYLIC PAINT P2549 FAILED 60 0 SPECULAR GLOSS WITH 5 AND A 10-25 ACCEPTABLE RANGE IS

SPECIFIED.

PRIMER FOR

MP-47.0PRIMER FOR MP-47.0 P2550 N/A

21.2 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2551 7/16/2007 7/14/2012 CERTIFIED PASSED NO FSPMA POSTING FEES DUE

34 EXTERIOR/INTERIOR, ANTI-SLIP, WATER BORNE COATING P2552 8/24/2007 8/22/2012 CERTIFIED PASSED YES OK

2.9 ACRYLIC-BASE EXTERIOR, FLAT P2553 7/16/2007 7/14/2012 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK

PRIMER PRIMER P2554 N/A

21.2 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2555 7/16/2007 7/14/2012 CERTIFIED PASSED NO

PRIMER CONDITIONER P2556 N/A

21.2 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2557

FAILED: 1) VISCOSITY WITH 100 K.U. AND A 110-140 ACCEPTABLE RANGE IS

REQUIRED, AND 2) STORAGE STABILITY AFTER 14 DAYS AT 120 0C WITH 114

K.U. AND A MAXIMUM OF 110 K.U. IS REQUIRED (ORIGINAL [100 K.U.] +/- 10

K.U.).

PRIMER CONDITIONER P2558 N/A

2.9 ACRYLIC-BASE EXTERIOR, FLAT P2559 FAILED REFLECTANCE WITH 82 AND MINIMUM OF 84 IS REQUIRED.



FELIX FLORES (PPG REP) DECIDED TO CANCEL THE SUBMISSION OF THIS

BRAND FOR CERTIFICATION.

21.2 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2561 7/16/2007 7/14/2012 CERTIFIED PASSED NO

26.4 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2562 7/20/2007 7/18/2012 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK



FAILED THE STAIN BLOCK TEST FOR THE RED MARK-A -LOT AND RED PRECISE

VERY FINE PEN (PILOT) MARKERS.

45ACRYLIC BASE EXTERIOR TEXTURED COATING AGGREGATE

AND NON-AGGREGATEP2564

FELIX FLORES (PPG REP) DECIDED TO CANCEL THE SUBMISSION OF THIS

BRAND FOR CERTIFICATION.

PRIMER PRIMER FOR MP-2.9, MP-6.10, MP-27, MP-28 P2565 PRIMER SUBMITTED FOR EXTERIOR EXPOSURE



FAILED: 1- THE NON-VOLATILE VEHICLE (% BY WEIGHT) WITH 23 % AND A 13-

19 % ACCEPTABLE RANGE IS SPECIFIED, 2- THE PIGMENT (% BY WEIGHT OF

PAINT) WITH 35 % AND A 12-18 % ACCEPTABLE RANGE IS SPECIFIED, AND 3-

STORAGE STABILITY AFTER 14 DAYS AT 120 0C BECAUSE THE VISCOSITY WAS

123 KU AND A MAXIMUM OF 108 KU (ORIGINAL VISCOSITY 98 +/- 10 KU) WAS

SPECIFIED.

26.4 ACRYLIC-BASE, GLOSS ENAMEL, METAL SURFACES P2567 7/16/2007 7/14/2012 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK

2.9 ACRYLIC-BASE EXTERIOR, FLAT P2568 7/27/2007 7/25/2012 CERTIFIED PASSED ON EXTERIOR EXPOSURE YES OK

21.2 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2569 FAILED STORAGE STABILITY AFTER 14 DAYS AT 120 0C YIELDING A CAKE-LIKE

CONSISTENCY

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2570 PASSED

PRIMER ALKALI-RESISTANT PRIMER P2571 N/A

47.1 MOLD AND MILDEW PROOF ACRYLIC PAINT P2572FAILED 60 0 SPECULAR GLOSS WITH 5 AND A 10-25 ACCEPTABLE RANGE IS

SPECIFIED.

9.5 TRAFFIC PAINT, WATER EMULSION-BASED P2573 11/15/2008 11/14/2013 CERTIFIED PASSED YES OK

PRIMER PRIMER FOR MP-26 P2574 N/A

2.9 ACRYLIC-BASE EXTERIOR, FLAT P2575 10/16/2007 10/14/2012 CERTIFIED PASSED YES OK

21.2 ELASTOMERIC, ACRYLIC-BASE, EXTERIOR, FLAT P2576 CANCELLED


47.1 MOLD AND MILDEW PROOF ACRYLIC PAINT P2578 10/3/2007 10/1/2012 CERTIFIED PASSED YES OK


33.1 BLOCK FILLER, LATEX-BASE, INTERIOR/EXTERIOR P2580 12/10/2007 12/8/2012 CERTIFIED PASSED NO FSPMA POSTING FEES DUE

56.2 ELASTOMERIC ROOF PAINT P2581 7/25/2008 7/24/2013 CERTIFIED PASSED YES OK

PRIMER FOR

MP-2.9ACRYLIC LATEX PRIMER FOR MP-2.9 P2582 PRIMER FOR MP-2.9

44.2ACRYLIC BASE INTERIOR TEXTURED COATING AGGREGATE

AND NON-AGGREGATEP2583 9/2/2008 9/1/2013 CERTIFIED PASSED YES OK

PRIMER FOR

MP-28.3LATEX BONDING PRIMER FOR MP-28.3 P2584 N/A

PRIMER FOR

MP-28.3 INT/EXT LATEX PRIMER SEALER FOR MP-28.3 P2585 N/A

56.1 ELASTOMERIC ROOF PAINT P2586FAILED BECAUSE THE VISCOSITY WAS 130 K.U. AND A 105-125 ACCEPTABLE

RANGE IS SPECIFIED.

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2587FAILED BECAUSE THE VISCOSITY WAS 113 K.U. AND A 81-111 K.U.

ACCEPTABLE RANGE IS SPECIFIED

PRIMER FOR

MP-28.3

PRIMER FOR MP-28.3 EXTERIOR/INTERIOR, ALKALI

RESISTANT-STAIN BLOCK UNIVERSALP2588 N/A

28.3 ACRYLIC-BASE, SEMI-GLOSS, EXTERIOR P2589FAILED BECAUSE THE VISCOSITY WAS 115 K.U. AND A 81-111 K.U.

ACCEPTABLE RANGE IS SPECIFIED



CERTIFIED

EXPIRATION


POSTED ON

FSPMA WEBSITE


FEES


CERTIFICATION FEES

56.1 ELASTOMERIC ROOF PAINT P2590 7/25/2008 7/24/2013 CERTIFIED

PASSED AFTER THE COMMITTEE APPROVED ON THE JULY 25, 2008

COMMITTEE MEETING CHANGING THE ELONGATION @ BREAK ACCEPTABLE

CRITERIA FROM 200-300% TO 200-480%

YES OK


UNIVERSAL PRIMER/SEALER, ACRYLIC-BASEP2591 7/25/2008 7/24/2013 CERTIFIED PASSED YES OK

TOPCOAT

FOR MP-38

STAIN

BLOCK TEST

(MP-2.9)

ACRYLIC-BASE EXTERIOR, FLAT P2592 N/A

5.6 ENAMEL, ALKYD, GLOSS P2593FAILED SAG RESISTANCE WITH AN ANTI-SAG INDEX OF 3.5 AND A MINIMUM OF

7 IS SPECIFIED.

5.6 ENAMEL, ALKYD, GLOSS P2594FAILED BECAUSE THE VISCOSITY WAS 95 K.U. AND A 73-93 K.U. ACCEPTABLE

RANGE IS SPECIFIED.



FAILED BECAUSE THE VISCOSITY WAS 65 K.U. AND A 68-102 K.U.

ACCEPTABLE RANGE IS SPECIFIED.

5.7 ENAMEL, ALKYD, GLOSS P2596 7/25/2008 7/24/2013 CERTIFIED

PASSED. APPROVED WHEN THE COMMITTEE CHANGED THE % PIGMENT

ACCEPTANCE CRITERIA FROM 30-40% TO 28-40% ON ITS JULY 25, 2008

COMMITTEE MEETING.

ON EXTERIOR EXPOSURE YES OK

PRIMER FOR

MP-5PRIMER FOR MP-5. P2597 N/A

PRIMER FOR

MP-5.6PRIMER FOR MP-5.6 FOR CONCRETE AND METAL P2598 N/A


EXTERIOR SURFACESP2599 7/17/2008 7/16/2013 CERTIFIED PASSED YES OK


32.2 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2601 7/16/2008 7/15/2013 CERTIFIED PASSED YES OK

5.7 ENAMEL, ALKYD, GLOSS P2602 7/25/2008 7/24/2013 CERTIFIED

PASSED. APPROVED WHEN THE COMMITTEE CHANGED THE % PIGMENT

ACCEPTANCE CRITERIA FROM 30-40% TO 28-40% ON ITS JULY 25, 2008

COMMITTEE MEETING.

ON EXTERIOR EXPOSURE YES OK

PRIMER FOR

MP-5PRIMER FOR MP-5. P2603 N/A

2.9 ACRYLIC-BASE EXTERIOR, FLAT P2604 N/A


UNIVERSAL PRIMER/SEALER, ACRYLIC-BASEP2605 N/A



UNIVERSAL PRIMER/SEALER, ACRYLIC-BASEP2607 7/25/2008 7/24/2013 CERTIFIED PASSED YES OK

PRIMER FOR

MP-6INTERIOR FLAT BLUE-TINTED PASTEL BASE P2608 N/A

6.11 EXTERIOR-INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2609 FAILED THE REFLECTANCE TEST WITH 79 AND A MINIMUM OF 85 IS SPECIFIED

32.2 INTERIOR ENAMEL, LATEX-BASE, SEMI-GLOSS P2610 8/11/2008 8/10/2013 CERTIFIED PASSED YES OK


EXTERIOR SURFACESP2611 N/A

43 FLAME CONTROL VARNISH SYSTEM N/A PASSED N/A

43 FLAME CONTROL VARNISH SYSTEM N/A PASSED N/A


"B") FIRE RESISTANT PAINT N/A PASSED N/A

41FLAME CONTROL NO. 20-20 FLAT LATEX INTUMESCENT

(CLASS "A") FIRE RETARDANT PAINT N/A 11/19/2001 11/18/2006 EXPIRED PASSED N/A NO


"B") FIRE RESISTANT PAINT N/A CERTIFIED PASSED N/A YES

43 FLAME CONTROL VARNISH SYSTEM N/A CERTIFIED PASSED N/A YES



PAYMENT REPORT

FSPMA PAINT SAMPLES RECEIVED, TESTED, AND PAID AS OF 9/8/2008Page 1

DATE

RECEIVEDMANUFACTURER IDENTIFICATION MP NO.

LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK

NO.CHECK DATE STATUS

8/20/1998 SHERWIN-WILLIAMS CO. S60-44 ALKYD S/G ENAMEL, UNITED SIXTY ALKYD/S6 5.6 P2086 $473.45 YES CERTIFICATION 11/3/1998 EXPIRED

1/30/2003 SHERWIN-WILLIAMS CO. B42W101 METALATEX S/G B42 SERIES 6.7 P2087 $718.53 YES CERTIFICATION 11/3/1998

8/20/1998 SHERWIN-WILLIAMS CO. MONARCH HI GLOSS B-1710 26.1 P2088 $568.14 YES CERTIFICATION 11/3/1998

8/20/1998 SHERWIN-WILLIAMS CO. KOM KROMIK UNIVERSAL METAL PRIMER B50WZ1 P2089TO BE USED

W/MP26.1

8/20/1998 SHERWIN-WILLIAMS CO. A-180 ALKYD WOOD PRIMER Y24 31.1 P2090 $384.33 YES CERTIFICATION 11/3/1998 EXPIRED

8/20/1998 SHERWIN-WILLIAMS CO. UNITED POLY GLO INT. LATEX S/G LS44 32.1 P2091 $445.60 YES CERTIFICATION 11/3/1998

8/20/1998 SHERWIN-WILLIAMS CO. PRY RITE INT/EXT BLOCK FILLER 33.1 P2092 $328.63 YES CERTIFICATION 11/3/1998

10/9/1998COLOR WHEEL PAINT MFG. CO.,

INC.WEATHER MASTER HOUSE PAINT EXT FLAT 3700(MODIFIED ACRY. LAT.) 3.8 P2093 $467.88 YES CERTIFICATION 12/11/1998


INC.ALL PRIME LATEX ACRYLIC PRIMER #330 P2094 TO BE USED W/MP3.8

11/6/1998 M.A. BRUDER & SONS, INC. ACRYLIC GLOSS EXTERIOR 27 P2095 $456.74 YES CERTIFICATION 11/3/1998 EXPIRED

11/6/1998 M.A. BRUDER & SONS, INC. ACRYLIC INTERIOR SATIN 29 P2096 $765.88 YES CERTIFICATION 11/3/1998

11/25/1998 SEAL KRETE SEAL KRETE WATERPROOFING SEALER 14 P2097 $417.75 YES CERTIFICATION 11/23/1998

11/25/1998 SEAL KRETE EZ COAT SKID PROOF 34 P2098 $231.00 YES CERTIFICATION 11/23/1998

12/14/1998 FLEX BON PAINTS ACRYLIC LATEX S/G INT/EXT 595-1 6 P2099 $718.53 YES CERTIFICATION 12/11/1998

12/14/1998 FLEX BON PAINTS PREMIUM INT/EXT ACRYLIC GLOSS ENAMEL 99 SERIES 27.1 P2100 $456.74 YES CERTIFICATION 12/11/1998 EXPIRED

12/14/1998 FLEX BON PAINTS ACRYLIC LATEX PRIMER INT/EXT 194-1 6 P2101 EXPOSURE TEST

1/14/1999 BRUNING PAINT CO. EXT ACRYLIC FLAT HOUSE PAINT 310A3 2 P2102 $576.50 YES CERTIFICATION 2/5/1999 EXPIRED

1/14/1999 BRUNING PAINT CO. SILATHANE EXT. ACRYLIC GLOSS ENAMEL 532-00 26.1 P2103 $568.14 YES CERTIFICATION 2/5/1999 EXPIRED

1/14/1999 BRUNING PAINT CO. EXT. ACRYLIC S/G HOUSE & TRIM 315-00 28.1 P2104 $557.00 YES CERTIFICATION 2/5/1999

1/14/1999 BRUNING PAINT CO. WALLPLATE INT. ACRYLIC SATIN ENAMEL 110-00 29.1 P2105 $765.88 YES CERTIFICATION 2/5/1999

1/20/1999 SHERWIN-WILLIAMS CO. ARMORSEAL TREAD-PLEX WB ACRYLIC FLOOR COATING B90A101 34 P2106CERTIFICATION(ABRA

SION RESISTANT)

1/28/1999 BRUNING PAINT CO. PACON SUPREME EXT ACRYLIC FLAT HOUSE PAINT WHITE 370-00 3 P2107 $467.88 YES CERTIFICATION 2/5/1999

1/28/1999 BRUNING PAINT CO. PACON SUPREME EXT AKALI RESIIST. PIG. MASONRY COND. 393-00 14 P2108 $417.75 YES CERTIFICATION 2/5/1999 EXPIRED

1/28/1999 BRUNING PAINT CO. STORMPROOF EXT ACRYLIC ELAST. WATERPROOFING COAT 412-00 21 P2109 $518.01 YES CERTIFICATION 2/5/1999

1/28/1999 BRUNING PAINT CO. SILATHANE INT/EXT ACRYLIC GLOSS HIGH HIDING TINTABLE W 532-08 27 P2110 $456.74 YES CERTIFICATION 2/5/1999 EXPIRED

1/28/1999 BRUNING PAINT CO. PACON SUPREME EXT ACRYLIC S/G HOUSE & TRIM W 371-00 28 P2111 $557.00 YES CERTIFICATION 2/5/1999

1/28/1999 BRUNING PAINT CO. WALLPLATE INT ACRYLIC S/G WALL & TRIM ENAMEL 128-00 32 P2112 $445.60 YES CERTIFICATION 2/5/1999 EXPIRED

1/28/1999 RICHARD'S PAINT MFG. CO. INC. SIGNATURE SERIES 100% ACRYLIC FLAT HOUSE #100SR-572 INT/EXT 2.9 P2113 $576.50 YES CERTIFICATION 2/5/1999 EXPIRED

1/28/1999 RICHARD'S PAINT MFG. CO. INC. SIGNATURE SERIES 100% ACRYLIC GLOSS HOUSE #200SR-587 INT/EXT 27.1 P2114 $476.74 YES CERTIFICATION 2/5/1999

5/19/2003 SOMAY PRODUCTS, INC. ACRYLIC LATEX SEMIGLOSS ENAMEL 642-01 28 P2115 N/A N/A RE-TEST N/A N/A

5/19/2003 SOMAY PRODUCTS, INC. SIGNATURE SERIES 100% ACRYLIC S/G TRIM ENAMEL #750-SR-1364 28.1 P2115 $557.00 YES CERTIFICATION 2/5/1999

2/10/1999 CARIBBEAN PAINT CO., INC. PLIOSHIELD ACRYLIC LATEX S/G ENAMEL INT/EXT 6048 6.7 P2116 $718.53 YES CERTIFICATION 4/7/1999 EXPIRED

2/10/1999 CARIBBEAN PAINT CO., INC. PLIO-TITE ACRYLIC LATEX INT/EXT PRIMER 1625 22 P2117 $456.74 YES CERTIFICATION 4/7/1999

2/10/1999 CARIBBEAN PAINT CO., INC. PLIO-WOOD ACRYLIC LATEX INT/EXT WOOD PRIMER 1650 30 P2118 $414.96 YES CERTIFICATION 4/7/1999

2/10/1999 CORONADO PAINT CO., INC. STEP-SAFER ACRYLIC ANNTI-SLIP COATING 50-1 34 P2119 $231.00 YES CERTIFICATION 4/7/1999

2/16/1999 FLEX BON PAINTS ACRYLIC LATEX WALL & TRIM S/G 595-1 INT/EXT 6 P2120 $718.53 YES CERTIFICATION 8/2/1999

7/14/2003 GENESIS COATINGS ACRYLIC LATEX GLOSS ENAMEL 99-1 27 P2121 $456.74 YES CERTIFICATION 8/2/1999


INC.TROPICOAT INT/EXT WALL PAINT, S/G 320 6 P2122 $718.53 YES CERTIFICATION 8/2/1999 EXPIRED

8/25/2003 DURON PAINTS OPTIMA SUPREME GLOSS 3600 26 P2123 $568.14 YES CERTIFICATION 8/2/1999

2/1/1999 DELTA LABS MASONRY AND WOOD PRIMER #68W0023696 P2124 N/C N/C ADHESION TEST 6 QT. N/A

2/5/1999 SHERWIN-WILLIAMS CO. SUPER PAINT EXT HIGH GLOSS LATEX ENAMEL A85W507 27 P2125 N/C N/C EXPOSURE TEST N/A

8/25/2003 DURON PAINTS A-100 EXT. OIL WOOD PRIMER 27 P2126 N/C N/C EXPOSURE TEST N/A

8/25/2003 DURON PAINTS LOXON MASONRY EXTERIOR ACRYLIC PRIMER A24W300 27 P2127 N/C N/C EXPOSURE TEST N/A

4/23/1999 CORONADO PAINT CO., INC. RUST SCAT ACRYLIC LATEX HIGH GLOSS ENANEL 80-32 WHITE/TINT 27 P2128 $456.74 YES CERTIFICATION 4/7/1999

4/23/1999 CORONADO PAINT CO., INC. GOLD GLOSS ACRYLIC H&T 2-1 WHITE TINTABLE 28 P2129 $557.00 YES CERTIFICATION 4/7/1999 EXPIRED

4/23/1999 CORONADO PAINT CO., INC. TOUGH WALLS LATEX SATIN ENAMEL 60-1 WHITE 29 P2130 $765.88 YES CERTIFICATION 4/7/1999 EXPIRED

4/23/1999 CORONADO PAINT CO., INC. SUPER KOTE LATEX BLOCK FILLER 946-11 COMMERICIAL 33 P2131 $328.63 YES CERTIFICATION 4/7/1999

4/23/1999 M.A. BRUDER & SONS, INC. ARCHITECTURAL HIGH BUILD ELASTOMERIC 414624 21 P2132 $518.01 YES CERTIFICATION 5/21/1999 EXPIRED

2/8/1999 SUPERIOR PRODUCTS RUST GRIP LIQUID REINFORCE COATING P2133 N/C N/C EXPOSURE TEST N/A

2/8/1999 SUPERIOR PRODUCTS SUPER THERM P2134 N/C N/C EXPOSURE TEST N/A

2/8/1999 SUPERIOR PRODUCTS MOIST METAL GRIP (MIX W/CURING AGENT) P2135 N/C N/C EXPOSURE TEST N/A

2/8/1999 SUPERIOR PRODUCTS ENAMO GRIP (MIX W/CURING AGENT) P2136 N/C N/C EXPOSURE TEST N/A

2/8/1999 SUPERIOR PRODUCTS SP2001F FIRE-COATING P2137 N/C N/C NO TESTING N/A

2/5/1999 THERMA-COTE INC. THERMA-COVER P2138 N/C N/C EXPOSURE TEST N/A

6/7/1999 JOHNSON PAINTS LATEX CHALK CONDITIONER #140-1 (FLEX BON PAINTS 14 P2139 $417.75 YES CERTIFICATION 8/2/1999 EXPIRED

7/20/1999 BRUNING PAINT CO. 110-00 WALLPLATE INTERIOR ACRYLIC SATIN WHITE 29 P2140 N/C N/C CERTIFICATION N/A


INC.1250-CONTRACTORS CHOICE TI - GARD LATEX CONDITIONER 14 P2141 $417.75 YES CERTIFICATION 8/2/1999 EXPIRED


INC.1200-EVERLASTIC ELASTOMERIC COATING 21 P2142 $518.01 YES CERTIFICATION 8/2/1999 EXPIRED

7/22/1999 CORONADO PAINT CO., INC. 90-1 RUST SCAT LATEX SEMI-GLOSS ENAMEL 32 P2143 $445.60 CERTIFICATION EXPIRED

7/23/1999 SCOTT PAINTS 920 ACRY-POXY ACRYLIC EPOXY ENAMEL 16 P2144 $565.36 YES CERTIFICATION 8/2/1999 EXPIRED

4/23/1999 M.A. BRUDER & SONS, INC. # 056-125 MASONRY LOK-TITE P2145 N/C N/C EXPOSURE PRIMER N/A

8/16/1999 DURON PAINTS ULTRA DELUXE EXT. 100 % ACRYLIC LATEX FLAT 66-916-11 2 P2146 $576.50 YES CERTIFICATION 10/3/1999


DATE


LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK


8/16/1999 DURON PAINTS WEATHERSHIELD EXT. ACRYLIC SEMI-GLOSS HOUSE PAINT 03-914-11 6 P2147 $718.53 YES CERTIFICATION 10/3/1999

8/16/1999 DURON PAINTS MAXBOND MASONRY SURFACE CONDITIONER 80-063-13 14 P2148 $417.75 YES CERTIFICATION 10/3/1999

8/16/1999 DURON PAINTS DURA CLAD INDUSTRIAL COATING, ACRYLIC EPOXY GLOSS 95-200-31 16 P2149 $565.36 YES CERTIFICATION 10/3/1999

5/24/2001 DURON PAINTS ELASTOMERIC WALL COATING, SMOOTH TUETABLE 69-706-55 21 P2150 $518.01 YES CERTIFICATION 10/3/1999

8/16/1999 DURON PAINTS STAIN KILLER T-2 INT/EXT PRIMER SEALER 71-220-11 22 P2151 $456.74 YES CERTIFICATION 10/3/1999

8/16/1999 DURON PAINTS PERMA STAIN, EXT 100% ACRYLIC LATEX SOLID HIDE FLAT 28-303-11 24 P2152 $194.95 YES CERTIFICATION 10/3/1999

8/16/1999 DURON PAINTS DURA CLAD, IND COATING, DIRECT TO METAL ACRYLIC , GLOSS 91-870-11 26 P2153 $568.14 YES CERTIFICATION 10/3/1999

8/16/1999 DURON PAINTS WEATHERSHIELD EXT ACRYLIC S/G HOUSE PAINT 03-914-11 28 P2154 $557.00 YES CERTIFICATION 10/3/1999

9/4/2001 DURON PAINTS BOND'N'SEAL EXT ACRYLIC HOUSE PAINT PRIMER 08-124-11 30 P2155 $414.96 YES CERTIFICATION 10/3/1999

WILL EXPIRE

WITHIN NINE

MONTHS8/16/1999 DURON PAINTS PRO-KOTE SUPREME INT LATEX S/G ENAMEL 24-916-11 32 P2156 $445.60 YES CERTIFICATION 10/3/1999

8/20/1999 SHERWIN-WILLIAMS CO. DURA-POX WATER BASED EPOXY B70 W 500 16 P2157 $565.36 YES CERTIFICATION 10/3/1999 EXPIRED

2/6/2003 SHERWIN-WILLIAMS CO. DTM ACRYLIC GLOSS B66 W 100 26 P2158 $568.14 YES CERTIFICATION 10/3/1999 EXPIRED

8/20/1999 SHERWIN-WILLIAMS CO. ULTRA CRETE TEXTURED ACRYLIC III 34 P2159 $231.00 YES CERTIFICATION 10/3/1999 EXPIRED

8/30/1999 BRUNING PAINT CO. SILATHANE II 532-13 P2160 N/C N/C EXPOSURE TEST N/A

8/30/1999 BRUNING PAINT CO. EXT HOUSE PAINT PRIMER 245-00 P2161 N/C N/C EXPOSURE TEST N/A

8/30/1999 RICHARD'S PAINT MFG. CO. INC. SIGNATURE SERIES HOUSE PAINT PRIMER 21 P2162 N/C N/C EXPOSURE TEST N/A

8/30/1999 RICHARD'S PAINT MFG. CO. INC. SIGNATURE SERIES ALKYD WOOD PRIMER 10 P2163 N/C N/C EXPOSURE TEST N/A

8/30/1999 CORONADO PAINT CO., INC. ELAST-O-MERIC ACRYLIC SEALER MASONRY 48-11 P2164 N/C N/C EXPOSURE TEST N/A

8/30/1999 CORONADO PAINT CO., INC. ACRYLIC HOUSE PAINT PRIMER 410-11 P2165 N/C N/C EXPOSURE TEST N/A

8/30/1999 M.A. BRUDER & SONS, INC. SEA SHORE PRIME COAT LATEX # 056-9584 P2166 N/C N/C EXPOSURE TEST N/A

10/11/1999 DURON PAINTS MAXBOND MASONRY SURFACE CONDITIONER PIGMENTED WHITE 80-06212 14 P2167 N/C N/CCERTIFICATION

(RETEST)N/A

10/11/1999 SHERWIN-WILLIAMS CO. MP2 EXTERIOR ACRYLIC 2 P2168 $576.50 NO RECORDCERTIFICATION

(PASSED)NO RECORD 2/18/2000 EXPIRED

10/13/1999 DURON PAINTS DURA CLAD IND COATING DIRECT TO METAL ACRYLIC GLOSS 91-870-11 26 P2169 N/C N/CCERTIFICATION

(RETEST)N/A

10/26/1999 DURON PAINTS 80135-11 MAX-FLEX I ELASTOMERIC WATERPROOFING SURFACE COND. P2170 N/C N/C EXPOSURE TEST N/A

11/15/1999 BRUNING PAINT CO. 110-00 WALL PLATE INT ACRYLIC SATIN WHITE 29 P2171 N/C N/CCERTIFICATION

(RETEST)N/A

11/15/1999 DURON PAINTS ULTRA DELUX EXT 100 % ACRYLIC LATEX FLAT 66-916-11 2 P2172 N/C N/CCERTIFICATION

(RETEST)N/A EXPIRED

11/15/1999 DURON PAINTS STAIN KILLER T-2 INT/EXT PRIMER SEALER 71-220-11 22 P2173 N/C N/CCERTIFICATION

(RETEST)N/A EXPIRED

11/15/1999 DURON PAINTS DURA CLAD DTM ACRYLIC COATING HIGH GLOSS 95-300-11 26 P2174 N/C N/CCERTIFICATION

(RETEST)N/A EXPIRED

11/15/1999 DURON PAINTS PRO KOTE SUPREME INT LATEX S/G ENAMEL 24-916-11 32 P2175 N/C N/CCERTIFICATION

(RETEST)N/A

11/17/1999 FLEX BON PAINTS INT/EXT 100% ACRYLIC LATEX PRIMER 194-1 WHITE 30 P2176 $414.96 YES CERTIFICATION 023367 2/18/2000 EXPIRED

11/22/1999 DURON PAINTS WEATHSHIELD EXT ACRYLIC S/G HOUSE PAINT 03-914-11 6 P2177 N/C N/CCERTIFICATION

(RETEST)N/A

12/13/1999 M.A. BRUDER & SONS, INC.CAPE COATING INT/EXT VINYL ACRYLIC FLAT LATEX PAINT WHITE 412-

99511 P2178 $403.82 YES CERTIFICATION 811436 2/18/2000 EXPIRED

12/13/1999 M.A. BRUDER & SONS, INC. ARCHITECTURAL IND. 26114 FSPMA 2.9 ACRYLIC BASE EXT FLAT 2 P2179 $576.50 YES CERTIFICATION 811466 2/18/2000 EXPIRED

12/13/1999 M.A. BRUDER & SONS, INC. LOK TITE SURFACE CONDITIONER EXT LATEX WHITE 056-1561 14 P2180 $417.75 YES CERTIFICATION 811464 2/18/2000

12/13/1999 M.A. BRUDER & SONS, INC. ARCHITECTURAL IND 24-179 FSPMA 28.1 ACRYLIC S/G EXT PAINT 28 P2181 $557.00 YES CERTIFICATION 811465 2/18/2000

2/3/2000 DURON PAINTS MAXBOND MASONRY SURFACE CONDITIONER PIGMENTED WHITE 80-06212 14 P2182 N/C N/CCERTIFICATION

(RETEST)N/A EXPIRED

2/22/2000 DURON PAINTS EXTERIOR ALKYD OIL HOUSE PAINT # 08-023-44 P2183 N/C N/C EXPOSURE TEST N/A

2/22/2000 DURON PAINTS DURA CLAD ALKYD METAL PRIMER #33-010-44 P2184 N/C N/C EXPOSURE TEST N/A

3/8/2000 SHERWIN-WILLIAMS CO. METALATEX S/G COATING B42W101 6 P2200 N/C N/CCERTIFICATION

(RETEST)N/A

3/8/2000 SHERWIN-WILLIAMS CO. ELASTOMERIC WATERPROOFING COATING A05W00101 21 P2201 $538.73 NO RECORDCERTIFICATION


3/8/2000 SHERWIN-WILLIAMS CO. PREPRITE PROBLOCK LATEX B51W20 22 P2202 $475.00 NO RECORDCERTIFICATION

(FAILED)NO RECORD 1/23/2001

3/8/2000 SHERWIN-WILLIAMS CO. PROMAR 200 LATEX SEMI-GLOSS B31W201 32 P2203 $463.42 NO RECORDCERTIFICATION

(FAILED)NO RECORD 1/23/2001

3/23/2000 CORONADO PAINT CO., INC. ELASTOMERIC SUPER STRETCH ACRYLIC MEMBRANE 166-1 21 P2206 $538.73 YESCERTIFICATION

(FAILED)120880 1/23/2001 EXPIRED

3/23/2000 CORONADO PAINT CO., INC. MAXUM 2 100% ACRYLIC SOLID STAIN M2000-33 24 P2207 $202.75 YESCERTIFICATION

(FAILED)120880 1/23/2001

3/23/2000 CORONADO PAINT CO., INC. CRYLICOTE GOLD ACRYLIC HOUSE PAINT PRIMER # 410-11 30 P2208 $431.56 YESCERTIFICATION

(PASSED)120880 1/23/2001 EXPIRED

5/22/2001 CORONADO PAINT CO., INC. CRYLICOTE GOLD ACRYLIC HOUSE PAINT PRIMER # 410-11 38 P2208 $431.56 YESCERTIFICATION


3/23/2000 CORONADO PAINT CO., INC. TOUGH WALLS LATEX S/G ENAMEL 22-1 32 P2209 $463.42 YESCERTIFICATION



DATE


LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK


3/23/2000 M.A. BRUDER & SONS, INC. PLY-THANE 890 HIGH SOLIDS GLOSS 020-1617 P2210 N/C N/CEVALUATION FOR

NEW SPEC.N/A

3/23/2000 M.A. BRUDER & SONS, INC. PLY-THANE 890 HIGH SOLIDS GLOSS 020-0698 PART B ACTIVATOR P2211 N/C N/CEVALUATION FOR

NEW SPEC.N/A

3/27/2000 SCOTT PAINTS ALL GRIP ACRYLIC S/G INT/EXT 435 WHITE 6 P2212 $747.27 NO RECORDCERTIFICATION

(FAILED)NO RECORD N/A

3/27/2000 SCOTT PAINTS AQUASEAL LATEX SURFACE CONDITIONER 692 WHITE P2213 N/C N/C PRIMER FOR MP 6 N/A N/A

4/12/2000 SHERWIN-WILLIAMS CO. CENTURON WATER BASED URETHANE B65W701 PART A P2214 EVALUATION

4/12/2000 SHERWIN-WILLIAMS CO. WATER BASED URETHANE HARDNER B65V700 PART B P2215 EVALUATION

4/12/2000 SHERWIN-WILLIAMS CO. UNITED SIXTY INT ALKYD S/G ENAMEL S60-44 5 P2216 EVALUATION

4/17/2000 SHERWIN-WILLIAMS CO. PREP LITE PRO BLOCK LATEX PRIMER SEALER INT/EXT B51W20 22 P2217 RE-TEST


INC.TROPICOAT HOUSE PAINT 100% ACRYLIC EXT S/G 320 28 P2218 $579.28 NO RECORD

CERTIFICATION


1/16/2002 GENESIS COATINGS

GCP 1000/GCR 3 HIGH PERFORMANCE ALIPHATIC POLYURETHANE TOP

COAT WHITE (PIGMENTED) WITH GCP-1000/GCR 3 PART A ACTIVATOR 40 P2219 EVALUATION EXPIRED

5/4/2001 CORONADO PAINT CO., INC. ACRYLIC MASONRY SURFACE CONDITIONER 940-11 14 P2220 $434.46 YES CERTIFICATION 121524 6/28/2000 EXPIRED

11/15/2001 FLEX BON PAINTS HOUSE & TRIM 100% ACRYLIC LATEX S/G 95-1 28 P2221 $579.28 YES CERTIFICATION 025787 6/2/2000 EXPIRED

11/26/2001 FLEX BON PAINTS 100% ACRYLIC LATEX ENAMEL S/G 97-1 32 P2222 $463.42 YES CERTIFICATION 025787 6/2/2000 EXPIRED

5/19/2000 FLEX BON PAINTS 100% INT/EXT ACRYLIC LATEX PRIMER 194-1 28 P2223 EXPOSURE TEST

5/31/2000 CORONADO PAINT CO., INC. SUPER KOTE 5000 VINYL ACRYLIC MASONRY PAINT 966-1 3 P2224 $486.60 YES CERTIFICATION 122066 6/2/2000

5/24/2001 CORONADO PAINT CO., INC. AIR CARE ODORLESS COATINGS ACRYLIC EGGSHELL ENAMEL 1230-1 39 P2225 EVALUATION EXPIRED

5/31/2000 CORONADO PAINT CO., INC. AIR CARE ODORLESS COATINGS ACRYLIC PRIMER 1240-1 39 P2226 EXPOSURE TEST

2/5/2001 CORONADO PAINT CO., INC. SUPER KOTE 5000 VINYL LATEX FLAT 28-1 1 P2227 $419.97 YES CERTIFICATION 122065 6/2/2000 EXPIRED

5/24/2001 CORONADO PAINT CO., INC. GRIP AND SEAL LATEX STAIN KILLER 116-11 38 P2228 $332.80 YES CERTIFICATION 122344 6/28/2000 EXPIRED

6/13/2000 SOMAY PRODUCTS, INC. VINYL ACRYLIC LATEX SURFACE CONDITIONER 530-01 6 P2229 EXPOSURE TEST

SOMAY PRODUCTS, INC. ACRYLIC LATEX S/G ENAMEL 630-011 6 P2230 $747.27 YES($718.53) CERTIFICATION 024698 6/28/2000 EXPIRED

6/21/2000 BRUNING PAINT CO. INT. ODOR FREE LATEX FLAT CEILING WHITE 103-50 39 P2231 EVALUATION

6/21/2000 BRUNING PAINT CO. INT LATEX FLAT ENAMEL ODOR FREE 125-00 39 P2232 EVALUATION

9/19/2001 DURON PAINTS HIGH PERFORMANCE INT LATEX LOW SHEEN ENAMEL 79-91411 39 P2233 EVALUATION EXPIRED

7/20/2000 CORONADO PAINT CO., INC. ACRYLIC S/G HOUSE PAINT 12-1 6.9 P2234 $747.27 YES CERTIFICATION 123086 7/25/2000

7/20/2000 CORONADO PAINT CO., INC. SUPER KOTE 5000 ACRYLIC ENAMEL UNDERCOAT 1178-11 22 P2235 $475.00 YES CERTIFICATION 123085 7/25/2000

7/31/2000 SHERWIN-WILLIAMS CO. BUILDER SELECT EXT ACRYLIC S/G B40WW7203 28 P2238 $579.28 YES ($557.00)CERTIFICATION

(BEING TESTED)4438537 1/23/2001

7/31/2000 SHERWIN-WILLIAMS CO. PRO MAR 400 INT LATEX EG-SHEL B20W451 29 P2239 $796.52 YES ($765.88)CERTIFICATION

(BEING TESTED)4438537 1/23/2001

7/31/2000 SHERWIN-WILLIAMS CO. PRO MAR 400 INT LATEX S/G B31W451 32 P2240 $463.42 YES ($445.60)CERTIFICATION

(BEING TESTED)4438537 1/23/2001

SHERWIN-WILLIAMS CO. HEALTH SPEC LOW ODOR INT LATEX EG-SHEL ENAMEL B9W51 39 P2241 SPECIAL TEST EXPIRED

5/17/2001 CORONADO PAINT CO., INC. MAXUM 2 EXT. 100% ACRYLIC SOLID STAIN M2000-33 24 P2242 $202.75 NO RECORDCERTIFICATION

(BEING TESTED)NO RECORD 1/23/2001 EXPIRED

9/7/2000 SHERWIN-WILLIAMS CO. PRO MAR 400 INT. LATEX EGG-SHELL B20W451 29 P2243 N/C N/C RE-TEST N/A N/A

9/7/2000 CORONADO PAINT CO., INC. SUPREME COLLECTION ACRYLIC BONDING PRIMER # 8-11PRIMER

FOR MP-6P2244 N/C N/C EXPOSURE TEST N/A N/A

9/7/2000 CORONADO PAINT CO., INC. MAXUM STARTER EXT. PRIMER # M900-11PRIMER

FOR MP-24P2245 N/C N/C EXPOSURE TEST N/A N/A

3/4/2002 M.A. BRUDER & SONS, INC. SEA SHORE FLAT HOUSE PAINT 100% ACRYLIC LATEX 061-1501 2 P2246 $576.50 NO RECORD CERTIFICATION NO RECORD 2/1/2001 EXPIRED

4/2/2002 M.A. BRUDER & SONS, INC. LOKTITE SURFACE CONDITIONER EXTERIOR LATEX 056-1561 14 P2247 $417.75 NO RECORD RECERTIFICATION NO RECORD 2/1/2001 EXPIRED

4/2/2002 M.A. BRUDER & SONS, INC. MP-22 INTERIOR/EXTERIOR PRIMER 802-946 22 P2248 $456.74 NO RECORD RECERTIFICATION NO RECORD 2/1/2001 EXPIRED

4/2/2002 M.A. BRUDER & SONS, INC. RUST-O-LASTIC HYDRO-PRIME ii (METAL PRIMER GRAY R0732118) 25 P2249 $459.52 NO RECORD RECERTIFICATION NO RECORD 2/1/2001 EXPIRED

1/22/2001 M.A. BRUDER & SONS, INC. RUST-O-LASTIC GLOSS ACRYLIC (DTM) MAINTENANCE FINISH 043-1501 26 P2250 $568.14 NO RECORD RECERTIFICATION NO RECORD 2/1/2001

1/22/2001 M.A. BRUDER & SONS, INC. FRESH KOTE S/G INTERIOR LATEX 410-1501 32 P2251 $445.60 NO RECORD RECERTIFICATION NO RECORD 2/1/2001

11/5/2003 SHERWIN-WILLIAMS CO. PRO-MAR 400 INT. LATEX EGG-SHELL B20W451 29 P2252 N/C N/C RE-TEST N/A N/A EXPIRED

4/7/2004 SHERWIN-WILLIAMS CO. PRO-MAR 400 INT LATEX S/G B31W451 32 P2253 N/C N/C RE-TEST N/A N/A EXPIRED


INC.OPTIMA SUPER ACRYLIC EXTERIOR SEMI-GLOSS 350 27 P2254 $456.74 $456.74 CERTIFICATION 3359 2/20/2001 EXPIRED


INC.WEATHER MASTER WOOD PRIMER EXTERIOR ALKYD 532 31 P2255 $384.33 $384.33 CERTIFICATION 3360 2/20/2001


INC.VINA FLAT INTERIOR LATEX WALL PAINT 400 1 P2256 $403.82 $403.82 CERTIFICATION 3358 3/6/2001 EXPIRED

3/19/2001 GENESIS COATINGSGCP 1000 GENERAL MAINTENANCE ANTI-GRAFFITI COATING 2

COMPONENTS. TOP COAT CLEAR40 P2257 N/C N/C EVALUATION N/A N/A

4/3/2001 COATINGS RESOURCE CORP. CR-38-C HIGH SOLIDS WATERBORNE URETHANE.TOP COAT CLEAR 40 P2258 N/C N/C EVALUATION N/A N/A

4/13/2001 INSL-X COATINGSENVIROCARE CRYSTAL CLEAR WATERBASE ACRYLIC POLYURETHANE

GLOSS CA-650040 P2259 N/C N/C EVALUATION N/A N/A

4/13/2001 INSL-X COATINGSENVIROCARE CRYSTAL CLEAR WATERBASE ACRYLIC POLYURETHANE SATIN

CA-652540 P2260 N/C N/C EVALUATION N/A N/A

6/29/2000 COATINGS RESOURCE CORP. CR-38B-C HIGH SOLIDS WATERBORNE URETHANE WHITE PIGMENTED 40 P2261 N/C N/C EVALUATION N/A N/A EXPIRED

5/4/2001 CORONADO PAINT CO., INC. QUICK DRY ACRYLIC TRAFFIC PAINT 9 P2262 $623.84 $623.84 CERTIFICATION 130378 6/4/2001 EXPIRED

3/7/2001 CORONADO PAINT CO., INC. SUPER KOTE 5000 VINYL LATEX FLAT MASONRY PAINT 966-1 3 P2263 N/C N/C RE-TEST N/A N/A EXPIRED

5/4/2001 CORONADO PAINT CO., INC. SUPER KOTE ACRYLIC ENAMEL UNDERCOAT 22 P2264 N/C N/C RE-TEST N/A N/A


DATE


LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK


5/4/2001 CORONADO PAINT CO., INC. GRIP AND SEAL #116-11 38 P2265 N/C N/C RE-TEST N/A N/A

9/4/2001 DURON PAINTS WEATHERSHIELD GLOSS EXT. 100% ACRYLIC LATEX 103-0914-11 27 P2266 $456.74 NO RECORD CERTIFICATION NO RECORD 1/15/2002 EXPIRED

1/30/2003 SHERWIN-WILLIAMS CO. BUILDERS SELECT EXT ACRYLIC FLAT B2WW7203 6401-68027 3 P2267 $467.88 $467.88 CERTIFICATION 4652311 6/4/2001 EXPIRED

5/17/2001 SHERWIN-WILLIAMS CO. LOXON EXT ACRYLIC PRIMER AZ4W300 101-7268PRIMER

FOR MP-3P2268 N/C N/C EXPOSURE TEST N/C N/C

1/31/2003 SHERWIN-WILLIAMS CO. SETFAST ACRYLIC LATEX TRAFFIC MARKING PAINT MT-2160 8000-03238 9 P2269 $623.84 $623.84 CERTIFICATION 4652311 6/4/2001 EXPIRED

5/17/2001 SHERWIN-WILLIAMS CO. LOXON CONDITIONER A24W100 6403-15958 14 P2270 $417.75 $417.75 CERTIFICATION 4652311 6/4/2001

5/17/2001 SHERWIN-WILLIAMS CO. DTM ACRYLIC PRIMER/FINISH SWA1003 B66W1 136-1500 25 P2271 $459.52 $459.52 CERTIFICATION 4652311 6/4/2001

1/12/2004 SHERWIN-WILLIAMS CO. HARMONY ZERO VOC EG-SHEL B9W951 6403-36038 29 P2272 $765.88 $765.88 CERTIFICATION 4652311 6/4/2001 EXPIRED

1/16/2004 SHERWIN-WILLIAMS CO. WEATHER PERFECT EXT OIL UNDERCOATER Y24W538 809-1357 31 P2273 $384.33 $384.33 CERTIFICATION 4652311 6/4/2001 EXPIRED

4/26/2004 SHERWIN-WILLIAMS CO. SUPER PAINT INT SEMI-GLOSS LATEX A88W17 9954-99993 32 P2274 $445.60 $445.60 CERTIFICATION 4652311 6/4/2001 EXPIRED

SHERWIN-WILLIAMS CO. HARMONY ZERO VOC EG-SHEL B9W951 6403-36038 39 P2275 N/C $403.82 CERTIFICATION 4652311 N/C EXPIRED

5/24/2001 DULUX-ICI ULTRA HIDE DURUS EXT ACYLIC FLAT FINISH 2210-0100 2 P2276 $576.50 $576.50 CERTIFICATION 1155295 6/4/2001 EXPIRED

5/22/2001 DULUX-ICIULTRA HIDE GRIPPER AQUACRYLIC STAIN KILLER PRIMER SEALER 3210-

1200

WOOD

PRIMERP2277 N/C N/C EXT. EXPOSURE N/C N/A

5/22/2001 DULUX-ICI ULTRA HIDE DURUS EXT ACRYLIC PRIMECAT 2010-1200WOOD

PRIMERP2278 N/C N/C EXT. EXPOSURE N/C N/A

5/22/2001 DULUX-ICIBOND-PREP INT/EXT WATERBORNE PIGMENTED BONDING PRIMER 3030-

120014 P2279 $417.75 $417.75 CERTIFICATION 1155294 6/4/2001

5/22/2001 DULUX-ICI DECRA-FLEX ELASTOMERIC COATING SYSTEM 2260-0100 21 P2280 $518.01 $518.01 CERTIFICATION 1155298 6/4/2001

5/22/2001 DULUX-ICI DULUX INT/EXT ACRYLIC GLOSS FINISH 3028-0100 27 P2281 $456.74 $456.74 CERTIFICATION 1155297 6/4/2001

5/22/2001 DULUX-ICI DULUX EXT LATEX SEMI GLOSS FINISH 2407-0100 28 P2282 $557.00 $557.00 CERTIFICATION 1155296 6/4/2001

2/6/2003 SHERWIN-WILLIAMS CO. LOXON MASONRY EXT. ACRYLIC COATING A24W301 8879-99993 21 P2283 $518.01 $518.01 CERTIFICATION 4663282 6/4/2001 EXPIRED

5/19/2003 SHERWIN-WILLIAMS CO. BUILDER'S SELECT EXT ACRYLIC SEMI GLOSS B40WK7203 6401-69173 28 P2284 $557.00 $557.00 CERTIFICATION 4663282 6/4/2001 EXPIRED

1/16/2004 SHERWIN-WILLIAMS CO. LOXON MASONRY EXT ACRYLIC PRIMER A24W300 101-7268 30 P2285 $414.96 $414.96 CERTIFICATION 4663282 6/4/2001 EXPIRED

8/20/1998 BENJAMIN MOORE SUPER SPEC LATEX FLAT FINISH 257 01 1.8 P2286 $403.82 $403.82 CERTIFICATION - 7/10/2001 EXPIRED

8/16/1999 BENJAMIN MOORE SUPER SPEC 100% ACRYLIC EXT FLAT 183 01 2.9 P2287 $576.50 $576.50 CERTIFICATION - 7/10/2001 EXPIRED

5/24/2001 BENJAMIN MOORE SATIN IMPERVO ALKYD LOW LUSTRE ENAMEL C235 01 4.5 P2288 $490.16 $490.16 CERTIFICATION - 7/10/2001

5/24/2001 BENJAMIN MOORE SUPER SPEC ALKYD S/G ENAMEL C271 01 4.5 P2289 $490.16 $490.16 CERTIFICATION - 7/10/2001

5/24/2001 BENJAMIN MOORE IMPERVO C133 ALKYD HIGH GLOSS METAL & WOOD ENAMEL 5.6 P2290 $473.45 $473.45 CERTIFICATION - 7/10/2001

5/24/2001 BENJAMIN MOORE MOORE'S ALKYD MASONRY SEALER C077 01 7.6 P2291 $576.50 $576.50 CERTIFICATION - 7/10/2001

5/24/2001 BENJAMIN MOORE MOORE'S ACRLIC MASONRY SEALER EXT SURFACE CONDITIONER 066 01 14.1 P2292 $417.75 $417.75 CERTIFICATION - 7/10/2001

5/24/2001 BENJAMIN MOORE IMPERVO 309 LATEX HIGH GLOSS METAL & WOOD ENAMEL 27.1 P2293 $456.74 $456.74 CERTIFICATION - 7/10/2001

5/24/2001 BENJAMIN MOORE SUPER SPEC 100% ACRYLIC EXT SATIN FINISH 170(184 01) 28.2 P2294 $557.00 $557.00 CERTIFICATION - 7/10/2001

5/31/2000 BENJAMIN MOORE SUPER HIDE LATEX SEMI GLOSS ENAMEL 283 32.1 P2295 $445.60 $445.60 CERTIFICATION - 7/10/2001 EXPIRED

6/1/2000 BENJAMIN MOORE DTM ACRYLIC SEMI GLOSS M29 08 36 P2296 $436.00 $436.00 CERTIFICATION - 7/10/2001 EXPIRED

5/24/2001 BENJAMIN MOORE ECO SPEC INT LATEX EGGSHELL ENAMEL 223 39 P2297 $403.82 $403.82 CERTIFICATION - 7/10/2001

6/4/2001 SHERWIN-WILLIAMS CO. AQUA-GLOSS EXTERIOR ACRYLIC 27 P2298 $456.74 $456.74 CERTIFICATION 4663282 6/4/2001

6/20/2001 SHERWIN-WILLIAMS CO. PREPRITE ANCHOR BOND INT/EXT ADHSION PROMOTING PRIMERADHESION

PRIMERP2299 N/A N/A ADHESION TEST N/A N/A

6/20/2001 SHERWIN-WILLIAMS CO. PREPRITE PROBLOCK INT/EXT LATEX PRIMER/SEALER PRIMER P2300 N/A N/A ADHESION TEST N/A N/A

6/20/2001 DULUX-ICI ULTRA HIDE GRIPPER INT/EXT ALL PURPOSE STAIN KILLER PRIMER PRIMER P2301 N/A N/A ADHESION TEST N/A N/A

8/9/2001 BENJAMIN MOORE FRESH START INT/EXT ALL PURPOSE 100% ACRYLIC PRIMER PRIMER P2302 N/A N/A ADHESION TEST N/A N/A

8/15/2001 BENJAMIN MOORE SATIN IMPERVO ALKYD LOW LUSTRE ENAMEL C23501 4.5 P2303 N/A N/A CERT. RE-TEST N/A N/A

8/15/2001 BENJAMIN MOORE SUPER SPEC ALKYD S/G ENAMEL C27101 4.5 P2304 N/A N/A CERT. RE-TEST N/A N/A

8/15/2001 BENJAMIN MOORE IMPERVO C133 ALKYD HIGH GLOSS METAL & WOOD ENAMEL 5.6 P2305 N/A N/A CERT. RE-TEST N/A N/A

8/15/2001 BENJAMIN MOORE MOORE'S ACRYLIC MASONRY PRIMER EXT. HIGH BUILD 06801 14.1 P2306 N/A N/A CERT. RE-TEST N/A N/A

8/14/2001 CORONADO PAINT CO., INC. ELAST-O-MERIC ACRYLIC SEALER MASONRY #48-11PRIMER

FOR MP-3.8P2307 N/A N/A EXPOSURE TEST N/A N/A

8/14/2001 DURON PAINTS BOND & SEAL EXT. ACRYLIC HOUSE PAINT PRIMER #08-12411 PRIMER P2308 N/A N/A EXPOSURE TEST N/A N/A

8/14/2001 DURON PAINTS MAX BOND SURFACE CONDITIONER #80-07511

PRIMER

FOR MP-

27.1

P2309 N/A N/A EXPOSURE TEST N/A N/A

8/16/2001 ALACHUA COUNTY PRODUCT #4271 LATEX TRAFFIC PAINT 9 P2310 N/A N/A EVALUATION N/A N/A

8/16/2001 ALACHUA COUNTY PRODUCT #801 RUST INHIBITIVE METAL PRIMER 25 P2311 N/A N/A EVALUATION N/A N/A

8/16/2001 ALACHUA COUNTY PRODUCT #805 ACRYLIC GLOSS DIRECT TO METAL 35 P2312 N/A N/A EVALUATION N/A N/A

8/20/2001 DURON PAINTS HARD KOTE KNOCKDOWN ACRYLIC TEXTURE P2313 N/A N/A EVALUATION N/A N/A

5/19/2000 BENJAMIN MOORE HIGH GLOSS METAL AND WOOD ENAMEL WHITE 309-01 IMPERVEX 27 P2314 N/A N/A RE-TEST N/A N/A EXPIRED

9/4/2001 BENJAMIN MOORE SUPER SPEC HOUSE AND TRIM PAINT WHITE 170-01 28 P2315 N/A N/A RE-TEST N/A N/A

6/6/2000 BENJAMIN MOORE ECO SPEC EGGSHELL ENAMEL PURE WHITE 223-01 39 P2316 N/A N/A RE-TEST N/A N/A EXPIRED

2/6/2003 SHERWIN-WILLIAMS CO. LOXON CONDITIONER A24 W100 6403-15958 14 P2317 N/A N/A RE-TEST CERTIF. N/A N/A EXPIRED

9/19/2001 SHERWIN-WILLIAMS CO. AQUA GLOAA EXT. HOUSE AND TRIM FINISH LG1 27 P2318 N/A N/A RE-TEST CERTIF. N/A N/A

9/20/2001 DURON PAINTS HARD KOTE KNOCKDOWN ACRYLIC TEXTURE 75-50055 P2319 N/A N/A EVALUATION N/A N/A

5/10/2001 CORONADO PAINT CO., INC. SUPER KOTE 5000 ACRYLIC ENAMEL UNDERCOATER 1178-11 22 P2320 $456.74 CERTIFICATION 10/30/2001 EXPIRED

8/16/1999 BENJAMIN MOORE SATIN IMPERVO ALKYD LOW LUSTER C235 4.5 P2321 N/A RE-TEST N/A N/A EXPIRED

10/9/2001 BENJAMIN MOORE SUPER SPEC PREMIMUM ALKYD INTERIOR S/G ENAMEL C271 4.5 P2322 N/A RE-TEST N/A N/A

10/9/2001 BENJAMIN MOORE IMPERVO ALKYD HIGH GLOSS METAL AND WOOD ENAMEL C133 5.6 P2323 N/A RE-TEST N/A N/A

5/19/2000 BENJAMIN MOORE SUPER SPEC PREMIMUM LATEX EXT. HOUSE AND TRIM PAINT 170 28.1 P2324 N/A RE-TEST N/A N/A EXPIRED

10/18/2001 SHERWIN-WILLIAMS CO. DTM ACRYLIC PRIMER/FINISH B66W1 136-1500 25 P2325 N/A RE-TEST N/A N/A

4/2/2002 M.A. BRUDER & SONS, INC. M.A. BRUDER & SONS, INC. 30 P2326 $414.96 $414.96 CERTIFICATION N/A 10/9/2001 EXPIRED


DATE


LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK


4/16/2002 M.A. BRUDER & SONS, INC. M.A. BRUDER & SONS, INC. 33 P2327 $328.63 $328.63 CERTIFICATION N/A 10/9/2001 EXPIRED

11/15/2001 SOMAY PRODUCTS, INC. 100% ACRYLIC LATEX S/G ENAMEL 642-01 28 P2328 $557.00 $557.00 CERTIFICATION N/A 10/302001

11/15/2001 SOMAY PRODUCTS, INC. VINYL ACRYLIC LATEX SURFACE CONDITIONER 530 P2329 N/A EXTERIOR EXPOSURE N/A N/A

11/15/2001 BENJAMIN MOOREMOORLASTIC ELASTOMERIC WATER PROOF EXT. LOW LUSTER FINISH 055-

0121 P2330 $518.01 CERTIFICATION 1/15/2002

5/2/2000 BENJAMIN MOORE D.T.M. ACRYLIC S/G M29 1B 26 P2331 $568.14 CERTIFICATION 1/15/2002 EXPIRED

4/14/2003 SHERWIN-WILLIAMS CO. QUALI-CRAFT EXT. LATEX HIGH GLOSS B21WW5300 27 P2332 $456.74 CERTIFICATION 1/15/2002 EXPIRED

7/16/2004 SHERWIN-WILLIAMS CO. MASTER HIDE LATEX S/G B31WW5201 32 P2333 $445.60 CERTIFICATION 1/15/2002 EXPIRED

6/13/2000 BRUNING PAINT CO. PEACON SUPREME HOSE AND TRIM PAINT 371-00 28 P2334 N/A EXTERIOR EXPOSURE N/A N/A EXPIRED

11/15/2001 BRUNING PAINT CO. AQUA LOCK PRIMER SELAER AQ-0500PRIMER

FOR MP-28P2335 N/A EXTERIOR EXPOSURE N/A N/A

11/15/2001 BENJAMIN MOORE MOORE'S ACRYLIC MASONRY SELAER 74873 14 P2336 $417.75 N/A CERTIFICATION N/A 1/15/2002

5/17/2001 CORONADO PAINT CO., INC. RUST SCAT LATEX METAL PRIMER 1036.211 25 P2337 $459.52 N/A CERTIFICATION N/A 1/15/2002 EXPIRED

5/17/2001 CORONADO PAINT CO., INC. RUST SCAT LATEX HIGH GLOSS ENAMEL 80-1 26 P2338 $568.14 N/A CERTIFICATION N/A 1/15/2002 EXPIRED

11/26/2001 CORONADO PAINT CO., INC. RUST SCAT ALKYD METAL PRIMER

PRIMER

FOR MP-26

& MP-36

P2339 N/A EXTERIOR EXPOSURE N/A N/A

8/20/1999 BENJAMIN MOORE SUPER SPEC PREMIUM INT. S/G ENAMEL C-271 4.5 P2340 $490.16 N/A RE-TEST N/A N/A EXPIRED

1/16/2002 BENJAMIN MOOREMOORLASTIC ELASTOMERIC WATER PROOF EXT. LOW LUSTRE FINISH 055-

0121 P2341 $518.01 N/A RE-TEST N/A N/A

2/19/2002 DURON PAINTS STAIN KILLER T-2 INT/EXT PRIMER SEALER 71-218-11 38 P2342 N/C N/A CERTIFICATION N/A N/A

3/23/2000 BENJAMIN MOORE MOORE'S ACRYLIC MASONRY PRIMER EXT. HIGH BUILD 068-01 14 P2343 $417.75 N/A RE-TEST N/A N/A EXPIRED

2/19/2002 BENJAMIN MOORE MOORLASTIC ELASTOMERIC WATERPROOF EXT. FLAT FINISH 056-01 21 P2344 $518.01 N/A RE-TEST N/A N/A

11/26/2001 FLEX BON PAINTS INT. EXT 100% ACRYLIC LATEX PRIMER 194-1 38 P2345 N/C N/A CERTIFICATION N/A N/A EXPIRED

3/18/2002 BENJAMIN MOORE FRESH START INT. EXT. ALL PURPOSE 100% ACRYLIC PRIMER 023-00 38 P2346 N/C N/A CERTIFICATION N/A N/A

3/29/2002 CORONADO PAINT CO., INC. CERAMA GARD PLUS INT. PRIMER SEALER 2110-11 38 P2347 N/C N/A CERTIFICATION N/A N/A

3/29/2002 CORONADO PAINT CO., INC. CERAMA GARD PLUS INT. EGG SHELL FINISH 2104-1 P2348 N/A SAMPLE N/A N/A

6/5/2002 SCOTT PAINTS ACRY-FLAT 100% ACRYLIC HOUSE PAINT 351 2 P2349 $576.50 N/A CERTIFICATION N/A 4/10/2002 EXPIRED

4/2/2002 SCOTT PAINTS ALL GRIP 435 6 P2350 $718.53 N/A CERTIFICATION N/A 4/10/2002

4/2/2002 SCOTT PAINTS AQUASEAL LATEX SURFACE CONDITIONER 699 14 P2351 $417.75 N/A CERTIFICATION N/A 4/10/2002

7/23/2002 SCOTT PAINTS SUPER-HIDE LATEX SATIN WALL PAINT Z-45 29 P2352 $765.88 N/A CERTIFICATION N/A 4/10/2002 EXPIRED

12/6/2002 SCOTT PAINTS SCRUB MASTER LATEX INTERIOR S/G ENAMEL # 270 32 P2353 $445.60 N/A CERTIFICATION N/A 4/10/2002 EXPIRED

1/28/2003 SCOTT PAINTS SKID X 480 ACRYLIC EPOXY ANTI-SLIP PAINT 34 P2354 $231.00 N/A CERTIFICATION N/A 4/10/2002 EXPIRED

4/2/2002 SCOTT PAINTS ULTRA 100% ACRYLIC SUPERCOAT PRIMERPRIMER

FOR MP-34P2355 N/A PRIMER FOR MP-2 & 6 N/A N/A

4/16/2002 CORONADO PAINT CO., INC. FLAT ACRYLIC HOUSE & TRIM 10-1 2 P2356 $576.50 N/A RECERTIFICATION N/A 5/1/2002

5/17/2001 CORONADO PAINT CO., INC. STEP-SAFER 50-1 34 P2357 $231.00 N/A RECERTIFICATION N/A 5/1/2002 EXPIRED

4/16/2002 CORONADO PAINT CO., INC. ELASTOMERIC ACRYLIC SEALERPRIMER

FOR MP-34P2358 N/C N/A PRIMER FOR MP-2 N/A N/A

4/16/2002 LIGHTHOUSEKROVER KRACK L410 ELASTOMERIC SMOOTH BRUSH GRADE PATCHING

COMPOUND42 P2359 N/C N/C

CERTIFICATION

(EVALUATION)N/A N/A

4/16/2002 LIGHTHOUSEKROVER KRACK L431 ELASTOMERIC TEXTURED BRUSH GRADE PATCHING


CERTIFICATION

(EVALUATION)N/A N/A

4/16/2002 LIGHTHOUSEKROVER KRACK L411 ELASTOMERIC SMOOTH KNIFE GRADE PATCHING


CERTIFICATION

(EVALUATION)N/A N/A

4/16/2002 LIGHTHOUSEKROVER KRACK L400 ELASTOMERIC TEXTURED KNIFE GRADE PATCHING


CERTIFICATION

(EVALUATION)N/A N/A

4/16/2002 CARIBBEAN PAINT CO., INC. PLIOFLEX KNIFE GRADE PATCH 13104 42 P2363 N/C N/CCERTIFICATION

(EVALUATION)N/A N/A

4/16/2002 FLAME CONTROL VERTICAL WALL PATCH BRUSH GRADE TEXTURED 42 P2364 N/C N/CCERTIFICATION

(EVALUATION)N/A N/A

4/16/2002 FLAME CONTROL VERTICAL WALL PATCH KNIFE GRADE TEXTURED 42 P2365 N/C N/CCERTIFICATION

(EVALUATION)N/A N/A

2/27/2001 CORONADO PAINT CO., INC. FLAT ACRYLIC HOUSE AND TRIM 10-1 (RETEST P-2356) 2 P2366 N/C N/C RETEST N/A N/A EXPIRED

5/3/2002 STO STO PRIMER COATING 801TSW PROPOSED P2367 N/C N/C EVALUATION N/A N/A

STO STO MEDIUM SAND FINISH, FINISH 306TSW 44 P2368 N/C N/C EVALUATION N/A N/A EXPIRED

5/8/2002 R.A. ENTERPRIZES COMMERCIAL TEXTURE FINE ITEM #2015 PROPOSED P2369 N/C N/C EVALUATION N/A N/A

6/19/2002 SCOTT PAINTS ALL GRIP 435 ACRYLIC SEMI-GLOSS 6 P2370 N/C N/C RETEST N/A N/A EXPIRED

4/27/2000 BENJAMIN MOORE MOORLASTIC ACRYLIC ELASTOMERIC WATERPROOF FLAT FINISH 05601 21 P2371 N/C N/C RETEST N/A N/A EXPIRED

6/19/2002 SCOTT PAINTS AQUASEAL LATEX SURFACE CONDITIONER 699 14 P2372 N/C N/C RETEST N/A N/A EXPIRED

6/12/2002 JOHNSON PAINTS FLEX BON PAINTS 38 P2373 N/C N/C RETEST N/A N/A

6/14/2002 SCOTT PAINTS5100 PLASTIFLEX ELASTOMERIC ADHESIVE CAULK BRUSH GRADE

(TEXTURED)42 P2374 N/C N/C

CERTIFICATION

(EVALUATION)N/A N/A

6/14/2002 SCOTT PAINTS 5200 PLASTIFLEX ELASTOMERIC PATCHING COMPOUND (TEXTURED KNIFE) 42 P2375 N/C N/CCERTIFICATION

(EVALUATION)N/A N/A

6/14/2002 SCOTT PAINTS5300 PLASTIFLEX ELASTOMERIC ADHESIVE CAULK SMOOTH (SMOOTH

BRUSH)42 P2376 N/C N/C

CERTIFICATION

(EVALUATION)N/A N/A


INC.310 TROPICOAT EXT. ACRYLIC HOUSE PAINT 2 P2377 $576.50 $576.50 RECERTIFICATION N/A 6/25/2002 EXPIRED


DATE


LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK



INC.3250 INT/EXT HI BUILD ACRYLIC BLOCK FILLER 33 P2378 $328.63 $328.63 RECERTIFICATION N/A 6/25/2002 EXPIRED


INC.330 OPTIMA INT/EXT ACRYLIC ALL PURPOSE PRIMER

PRIMER

FOR MP-2P2379 N/C N/C EXT. EXPOSURE N/A N/A

11/15/2001 FLEX BON PAINTS CLASSIC EXT. 100% ACRYLIC LATEX HOUSE PAINT 710 2 P2380 $576.50 UNK RECERTIFICATION UNK 8/5/2002 EXPIRED

7/23/2002 FLEX BON PAINTS INT/EXT 100% ACRYLIC PRIMERPRIMER

FOR MP-2P2381 N/C N/C RECERTIFICATION N/C N/C

8/19/2002 CARIBBEAN PAINT CO., INC. PLIOSHIELD ACRYLIC EXT./INT. 6048 SEMI-GLOSS PAINT 6 P2382 N/C N/C SHIPMENT SAMPLE N/C N/C



8/27/2002 SHERWIN-WILLIAMS CO.METALLATEX SEMI-GLOSS ACRYLIC COATING EXT/INT B42W111 6405-

187836.7 P2385 $718.53 $718.53 RECERTIFICATION 5002691 9/6/2002 EXPIRED

8/27/2002 SHERWIN-WILLIAMS CO.PRIMER

FOR MP-6P2386 N/C N/C RECERTIFICATION N/C N/C

8/27/2002 SHERWIN-WILLIAMS CO. A-100 LATEX PRIMER EXTERIOR 600-0483 WOOD

PRIMERP2387 N/C N/C RECERTIFICATION N/C N/C

8/27/2002 SHERWIN-WILLIAMS CO. LOXON HIGH PERFORMANCE EXT. ACRYLIC PRIMER A24 W300 101-7268MASONRY

PRIMERP2388 N/C N/C RECERTIFICATION N/C N/C

5/24/2001 CORONADO PAINT CO., INC. SUPERKOTE 5000 TOUGH-TEX ACRYLIC KNOCK DOWN FINISH 44 P2390 N/C N/C EVALUATION N/C N/C EXPIRED

12/11/2002 DURON PAINTS WEATHERSHIELD S/G EXT. 100% ACRYLIC COATING 03-914 11 6 P2391 $718.53 $718.53 RECERTIFICATION UNK -

STO STOLIT FREEFORM FINISH 156 44 P2392 N/C N/C EVALUATION N/C N/C EXPIRED

4/14/2003 SHERWIN-WILLIAMS CO. DTM ACRYLIC GLOSS COATING B66W111 (100SERIES) 26 P2393 $568.14 UNK RECERTIFICATION UNK 6/10/2003 EXPIRED

1/30/2003 SHERWIN-WILLIAMS CO. SUPER PAINT HIGH GLOSS LATEX ENAMEL 6401-20747 27 P2394 $456.74 UNK RECERTIFICATION UNK 6/10/2003

1/30/2003 SHERWIN-WILLIAMS CO. DURA CRAFT EXT. 100% ACRYLIC SEMI-GLOSS B21WW171 28 P2395 $557.00 UNK CERTIFICATION UNK 2/26/2003

1/30/2003 SHERWIN-WILLIAMS CO. PREPRITE INT/EXT BLOCK FILLER B25W25 33 P2396 $328.63 UNK RECERTIFICATION UNK 6/10/2003

5/27/2005 SHERWIN-WILLIAMS CO. DTM ACRYLIC SEMI-GLOSS B66W211 (200 SRIES) B66W1 36 P2397 $436.00 UNK RECERTIFICATION UNK 6/10/2003 EXPIRED

1/30/2003 SHERWIN-WILLIAMS CO. DTM ACRYLIC PRIMER FINISH 37 P2398 $325.00 UNK RECERTIFICATION UNK 6/10/2003

5/24/2001 DURON PAINTS WEATHERSHIELD S/G EXT 100% ACRYLIC COATING 03-914-11 6 P2399 N/C N/C 2ND SAMPLE N/C N/C EXPIRED

1/22/2001 COMEX INTERIOR TEXTURED BASE 44 P2400 N/C N/C EVALUATION N/C N/C EXPIRED

1/22/2001 COMEX INTERIOR TEXTURED 44 P2401 N/C N/C EVALUATION N/C N/C EXPIRED

2/5/2001 COMEX EXTERIOR TEXTURED 45 P2402 N/C N/C EVALUATION N/C N/C EXPIRED

2/18/2003 DURON PAINTS EXTERIOR ACRYLIC LATEX BOND N SEAL PRIMER # 08-12411PRIMER

FOR MP-6P2403 N/C N/C EXPOSURE TEST N/C N/C

2/26/2003 DURON PAINTS DURACLAD DIRECT-TO-METAL ACRYLIC COATING HIGH GLOSS 914 26 P2404 N/C N/C EVALUATION N/C N/C

2/26/2003 LIGHTHOUSE ELASTOMERIC TEXTURED KNIFE GRADE PATCHING COMPUND P2405 N/C N/C EVALUATION N/C N/C

4/25/2002 PPG EXT. ACRYLIC PIGMENTED MASONRY SEALER UC80013 14 P2406 $417.75 $417.75 CERTIFICATION UNK 4/10/2003 EXPIRED

4/14/2003 PPG PITT-FLEX EXT. 100% ACRYLIC ELASTOMERIC 4-110 21 P2407 $518.01 $518.01 CERTIFICATION UNK 4/10/2003

4/14/2003 PPG SPEEDHIDE ACRYLIC SEMI-GLOSS LATEX 6-900 28 P2408 $557.00 $557.00 CERTIFICATION UNK 4/10/2003

5/22/2002 PPG SPEEDHIDE ACRYLIC INT. SEMI-GLOSS LATEX 6-500 32 P2409 $445.60 $445.60 CERTIFICATION UNK 4/10/2003 EXPIRED

4/14/2003 PPG PITT-TECH INT/EXT ACRYLIC HIGH GLOSS DTM ENAMEL 90-374 35 P2410 $436.00 $436.00 CERTIFICATION UNK 4/10/2003

4/14/2003 PPG PITT-TECH 100% ACRYLIC PRIMER DTM ENAMELPRIMER

FOR MP-35P2411 N/A N/A EXPOSURE TEST N/A N/A

4/17/2003 SHERWIN-WILLIAMS CO. PRO-CRYL #B66W310

PRIMER

FOR MP-26

& MP-36

P2412 N/A N/A EXPOSURE TEST N/A N/A

9/1/2004 SHERWIN-WILLIAMS CO. PREP RITE INT/EXT BLOCK FILLER B25W25 33 P2413 N/A N/A RE-TEST N/A N/A EXPIRED

4/22/2003 SHERWIN-WILLIAMS CO. DTM ACRYLIC PRIMER FINISH 37 P2414 N/A N/A RE-TEST N/A N/A

SOMAY PRODUCTS, INC. ACRYLIC LATEX SEMIGLOSS ENAMEL 642-01 28.3 P2415 N/A N/A RETEST N/A N/A EXPIRED

6/5/2003 SOMAY PRODUCTS, INC. VINYL ACRYLIC LATEX SURFACE CONDITIONER #530PRIMER


4/22/2003 SHERWIN-WILLIAMS CO. SUPER PAINT HIGH GLOSS LATEX ENAMEL 6401 27 P2417 N/A N/A RETEST N/A N/A EXPIRED

7/14/2003 GENESIS COATINGS GCR 57 CLEAR FLAT C-1

46

(PROPOSED

)

P2419

7/14/2003 GENESIS COATINGS GCR 57 CLEAR GLOSS DT-1

46

(PROPOSED

)

P2420

7/14/2003 GENESIS COATINGS GCR 57 BLUE GLOSS DT-1

46

(PROPOSED

)

P2421 N/A N/A N/A N/A

7/14/2003 GENESIS COATINGS GCR 57 RED GLOSS R-1

46

(PROPOSED

)


11/3/2003 SHERWIN-WILLIAMS CO. COLORCRYL A15TV1 (6011-43464)

46

(PROPOSED

)


11/5/2003 PPG SPEEDHIDE ACRYLIC EXT. S/G LATEX 6-900 28 P2429 N/A N/A RE-TEST N/A N/A

6/5/2002 PPG PITT-TECH INT/EXT ACRYLIC HIGH GLOSS DTM ENAMEL 35 P2430 N/A N/A RE-TEST N/A N/A

WILL EXPIRE

WITHIN SIX

MONTHS

1/9/2004 PPG PITT-TECH #90-712 ACRYLIC PRIMERPRIMER



DATE


LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK


5/3/2002 PPG SPEEDHIDE ACRYLIC EXT. S/G LATEX 6-901 28 P2432 N/A N/A RE-TEST N/A N/A

WILL EXPIRE

WITHIN SIX

MONTHS

1/12/2004 RICHARD'S PAINT MFG. CO. INC. SR-572 SIGNATURE SERIES 100% ACRYLIC INT/EXT FLAT HOUSE PAINT 2 P2433 $576.50 $576.50 RE-CERTIFICATION 1470 1/22/2004

5/17/2001 CORONADO PAINT CO., INC. RUST SCAT LATEX HIGH GLOSS ENAMEL 80-1 27 P2434 $456.74 $456.74 RE-CERTIFICATION 152420 1/14/2004

WILL EXPIRE

WITHIN SIX

MONTHS

5/17/2004 CORONADO PAINT CO., INC. SUPER KOTE 5000 PROTECTION BLOCK FILLER 958-1 33 P2435 $328.63 $328.63 RE-CERTIFICATION 152420 1/14/2004

WILL EXPIRE

WITHIN SIX

MONTHS

1/16/2004 CORONADO PAINT CO., INC. GRIP AND SEAL LATEX STAIN KILLER 116-11PRIMER


1/28/2004 PPG SPEEDHIDE ACRYLIC LATEX PRIMERPRIMER


4/7/2004 SCOTT PAINTS 920 ACRY-POXY ACRYLIC ENAMEL 16 P2438 $565.36 $565.36 RE-CERTIFICATION 38202 3/26/2004

4/7/2004 DURON PAINTS MAX-FLEX PERFORMANCE 100% ELASTOMERIC COATING SMOOTH 80-920 21 P2439 $518.01 $518.01 RE-CERTIFICATION 62204 7/12/2004WILL EXPIRE

WITHIN ONE YEAR

5/24/2001 DURON PAINTS MAX-WOOD SIDING AND TRIM STAIN 100% ACRYLIC FORMULA 28-303 24 P2440 $194.95 $194.95 RE-CERTIFICATION 62204 7/12/2004

WILL EXPIRE

WITHIN NINE

MONTHS4/7/2004 DURON PAINTS BOND-N-SEAL PRIMER EXT. ACRYLIC LATEX 08-124 30 P2441 $414.96 $414.96 RE-CERTIFICATION 62204 7/12/2004


INC.1250 CONTRACTOR'S CHOICE TI-GARD LATEX CONDITIONER 14 P2442 $417.75 $417.75 RE-CERTIFICATION 53474 5/31/2004

4/26/2004 FLEX BON PAINTS EXTERIOR LATEX CHALK CONDITIONER 140 SERIES 14 P2443 $417.75 $417.75 RE-CERTIFICATION 2659-0574-5 4/13/2004

4/26/2004 FLEX BON PAINTS PREMIUM INT/EXT ACRYLIC GLOSS ENAMEL 99 SERIES 27.1 P2444 $456.74 $456.74 RE-CERTIFICATION 2659-0574-5 4/13/2004

4/29/2004 FLEX BON PAINTS ACRYLIC LATEX UNDERCOAT # 194-1 30 P2445 $414.96 $414.96 RE-CERTIFICATION 2659-0574-5 4/13/2004WILL EXPIRE

WITHIN ONE YEAR


INC.1250 CONTRACTOR'S CHOICE TI-GARD LATEX CONDITIONER EXTERIOR 14 P2446 N/A N/A RE-TEST FOR P2442 N/A N/A


INC.1200 EVERLASTIC ELASTOMERIC COATING 21 P2447 $518.01 $518.01 RE-CERTIFICATION 53475 6/9/2004

WILL EXPIRE

WITHIN ONE YEAR


INC.OPTIMUM PREMIUM BRAND ALL PRIME 100% ACRYLIC LATEX PRIMER

PRIMER


7/16/2004 FLEX BON PAINTS EXTERIOR LATEX CHALK CONDITIONER 140 SERIES 14 P2449 N/A N/A RE-TEST FOR P2443 N/A N/AWILL EXPIRE

WITHIN ONE YEAR

9/1/2004 FLEX BON PAINTS PREMIUM INT/EXT ACRYLIC GLOSS ENAMEL 99 SERIES 27.1 P2450 N/A N/A RE-TEST FOR P2444 N/A N/A

4/23/2001 CORONADO PAINT CO., INC. SUPREME LATEX SEMI GLOSS HOUSE PAINT 12-1 6.9 P2451 $718.53 $718.53 CERTIFICATION 157168 8/11/2004WILL EXPIRE

WITHIN ONE YEAR

11/22/2004 FLEX BON PAINTS PREMIUM INT/EXT ACRYLIC GLOSS ENAMEL 99 SERIES 27.1 P2452 N/A N/ARE-RE-TEST FOR

P2444N/A N/A

11/29/2004 DURON PAINTS BOND AND SEAL PRIMER #08-12411PRIMER


11/29/2004 DURON PAINTS MAX BOND SURFACE CONDITIONER #80-07511PRIMER


11/30/2004 CORONADO PAINT CO., INC. SUPREME COLLECTION EXTERIOR ACRYLIC BONDING PRIMER # 8-11PRIMER


11/30/2004 CORONADO PAINT CO., INC. ELAST-O-MERIC ACRYLIC SEALER MASONRY #48-11PRIMER


6/13/2003 SHERWIN-WILLIAMS CO. DURA-CRAFT EXTERIOR 100% ACRYLIC S/G HOUSE PAINT # B21WW171 28.2 P2457 $557.00 $557.00 CERTIFICATION 5877702 6/13/2005 CERTIFIED

5/27/2005 SHERWIN-WILLIAMS CO. WEATHER PERFECT EXT OIL UNDERCOATER # 809-1357PRIMER


5/27/2005 SHERWIN-WILLIAMS CO. LOXON HIGH PERFORMANCE EXT. ACRYLIC PRIMER A24 W300 PRIMER


6/17/2005 ICI-GLIDDEN DULUX PROFESSIONAL S/G ACRYLIC EXT. FINISH # 2406-0100 6.1 P2460 $718.53 $718.53 CERTIFICATION 27974 N/A CERTIFIED

6/17/2005 ICI-GLIDDEN DULUX PROFESSIONAL S/G ACRYLIC EXT. FINISH # 2406-0100 28.3 P2460 N/A N/A CERTIFICATION N/A N/A CERTIFIED

6/17/2005 ICI-GLIDDENPREP & PRIME HOUSE PENETRATING SOLVENT BASED PRIMER SEALER #

2110-12007.6 P2461 $576.50 $576.50 CERTIFICATION 27974 6/16/2005

6/17/2005 ICI-GLIDDENPREP & PRIME BOND-PREP INT/EXT W/BASED PIGMENTED MASONRY

BONDING PRIMER SEALER 3030-120014.3 P2462 $417.75 $417.75 CERTIFICATION 27974 6/16/2005

6/17/2005 ICI-GLIDDEN DECRA-FLEX ELASTOMERIC COATING SYSTEM 2260-0100 21.2 P2463 N/A N/A CERTIFICATION N/A N/A

6/17/2005 ICI-GLIDDEN DEVFLEX GLOSS DTM WATERBORNE ACRYLIC ENAMEL # 65950100 35 P2464 $436.00 $436.00 CERTIFICATION 27974 6/16/2005 CERTIFIED

6/17/2005 ICI-GLIDDEN DULUX ULTRA S/G INTERIOR ACRYLIC WALL & TRIM ENAMEL # 1407-0100 6.9 P2465 N/A N/A CERTIFICATION 27974 6/16/2005

8/11/2005 FLEX BON PAINTS 595-W PROFESSIONAL INT/EXT ACRYLIC LATEX WALL & TRIM S/G 6.10 P2466 $718.53 $718.53 CERTIFICATION 259-1007-5 8/8/2005 CERTIFIED

8/11/2005 FLEX BON PAINTS #800 RAINCHECK HIGH-BUILD WATERPROOF FINISH CV 10800WF 21.2 P2467 $518.01 $518.01 CERTIFICATION 259-1009-1 8/8/2005

8/11/2005 FLEX BON PAINTS #99 PREMIUM ACRYLIC LATEX GLOSS ENAMEL INT/EXT CV 10099WG 27.1 P2468 $456.74 $456.74 CERTIFICATION 259-1008-3 8/8/2005


DATE


LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK


8/7/2005 ZINSSER PERMA-WHITE MOLD & MILDEW PROOF INTERIOR PAINT EGGSHELL 47 P2469 $786.50 $786.50 CERTIFICATION 0134391 8/25/2005

8/7/2005 ZINSSER PERMA-WHITE MOLD & MILDEW PROOF INTERIOR PAINT SATIN 47 P2470 $786.50 $786.50 CERTIFICATION 0134391 8/25/2005

8/7/2005 ZINSSER PERMA-WHITE MOLD & MILDEW PROOF INTERIOR PAINT SEMI-GLOSS 47 P2471 $786.50 $786.50 CERTIFICATION 0134391 8/25/2005

9/8/2005 FLEX BON PAINTS #140 SERIES EXTERIOR LATEX CHALK CONDITIONER

PRIMER

FOR MP-21,

MP-28,

AND MP-6

P2472 N/A N/APRIMER FOR MP-21

AND MP-6N/A

9/13/2005 FLEX BON PAINTS #99 PREMIUM ACRYLIC LATEX GLOSS ENAMEL INT/EXT CV 10099WG 27.1 P2473 N/A N/A RE-TEST FOR P2468 N/A

10/4/2005 M.A. BRUDER & SONS, INC. ARCHITECTURAL HIGH BUILD ELASTOMERIC ACRYLIC FLAT # 414-6245 21.2 P2474 $621.61 $621.61 CERTIFICATION 119435 8/31/2005 CERTIFIED

10/4/2005 M.A. BRUDER & SONS, INC. SEA SHORE ACRYLIC LATEX S/G TRIM # 024-1501 28.3 P2475 $668.40 $668.40 CERTIFICATION 120727 9/14/2005 CERTIFIED

10/4/2005 M.A. BRUDER & SONS, INC. FRESH KOTE S/G INTERIOR LATEX 410-1501 32.1 P2476 $490.16 $490.16 CERTIFICATION 119417 8/31/2005

10/4/2005 M.A. BRUDER & SONS, INC. SEA SHORE PRIMER COAT LATEX # 056-9581 P2477 N/A N/A N/A N/A

10/4/2005 FLEX BON PAINTS # 194 SERIES INT/EXT PRIMER 100% ACRYLIC LATEX # CV10194WG P2478 N/A N/A N/A N/A

1/26/2006 ZINSSER PERMA-WHITE MOLD & MILDEW PROOF INTERIOR PAINT EGGSHELL 47 P2479 N/A N/A RE-TEST FOR P-2469 N/A N/A CERTIFIED

1/26/2006 ZINSSER PERMA-WHITE MOLD & MILDEW PROOF INTERIOR PAINT SATIN 47 P2480 N/A N/A RE-TEST FOR P-2470 N/A N/A CERTIFIED

1/26/2006 ZINSSER PERMA-WHITE MOLD & MILDEW PROOF INTERIOR PAINT SEMI-GLOSS 47 P2481 N/A N/A RE-TEST FOR P-2471 N/A N/A CERTIFIED

1/31/2006 M.A. BRUDER & SONS, INC. SUPERBOND ALL IN ONE INT/EXT # 036-1581 P2482 N/A N/A N/A N/A

1/31/2006 M.A. BRUDER & SONS, INC. FRESH KOTE S/G INTERIOR LATEX 410-1691 32.1 P2483 N/A N/A RE-TEST FOR P-2476 N/A N/A CERTIFIED

5/16/2006 ZINSSER BULLS EYE 1-2-3 PRIMER SEALER # 02001 38.1 P2484 $500.49 $500.49 CERTIFICATION 0145223 6/13/2006

5/16/2006 ZINSSER BULLS EYE 1-2-3 PRIMER SEALER # 02001 52 P2484 $620.40 $620.40 CERTIFICATION 0145225 6/13/2006 CERTIFIED

5/16/2006 ZINSSER BULLS EYE 1-2-3 PRIMER SEALER # 02001 53.1 P2484 $625.42 $625.42 CERTIFICATION 0145224 6/13/2006 CERTIFIED

6/26/2006INSL-X / CORONADO PAINT CO.,

INC.

CHECKRUST INSL-TILE INSL-X EP 5500 (Epoxy Pre-Primer Two-

Component)48.1 P2485 $630.78 $2,020.45 CERTIFICATION 207860 6/20/2006 CERTIFIED


INC.STIX WATERBORNE URETHANE ACRYLIC BONDING PRIMER SXA 110 52 P2486 $620.40 $2,020.45 CERTIFICATION 207860 6/20/2006 CERTIFIED


INC.INSL-X CHECK RUST WATER REDUCIBLE PRIMER WR-P811 53.1 P2487 $625.42 $2,020.45 CERTIFICATION 207860 6/20/2006


INC.INSL-X CHECK RUST WATER REDUCIBLE PRIMER WR-P811 53.1 P2488 N/A N/A RE-TEST FOR P2487 N/A N/A CERTIFIED

6/6/2006 SHERWIN-WILLIAMS CO. BUILDER SELECT EXT ACRYLIC FLAT B2WW7203 3.8 P2489 $552.10 $6,342.94 RE-CERTIFICATION 6210315 7/6/2006 CERTIFIED

6/6/2006 SHERWIN-WILLIAMS CO. SETFAST ACRYLIC LATEX TRAFFIC MARKING PAINT TM-2160 9.4 P2490 $686.22 $6,342.94 RE-CERTIFICATION 6210315 7/6/2006

6/6/2006 SHERWIN-WILLIAMS CO. LOXON MASONRY EXT ACRYLIC A24W351 21.2 P2491 $621.61 $6,342.94 RE-CERTIFICATION 6210315 7/6/2006 CERTIFIED

6/6/2006 SHERWIN-WILLIAMS CO. BUILDERS SELECT EXT ACRYLIC S/G B40WW7203 28.3 P2492 $668.40 $6,342.94 RE-CERTIFICATION 6210315 7/6/2006 CERTIFIED

6/6/2006 SHERWIN-WILLIAMS CO. HARMONY ZERO VOC EGG SHELL INT B9W951 39.2 P2493 $842.47 $6,342.94 RE-CERTIFICATION 6210315 7/6/2006 CERTIFIED

6/6/2006 SHERWIN-WILLIAMS CO. HARMONY ZERO VOC EGG SHELL INT B9W951 29.2 P2493 $444.20 $6,342.94 RE-CERTIFICATION 6210315 7/6/2006 CERTIFIED

6/6/2006 SHERWIN-WILLIAMS CO. LOXON MASONRY ET ACRYLIC PRIMER A24W300 30.1 P2494 $456.46 $6,342.94 RE-CERTIFICATION 6210315 7/6/2006

6/6/2006 SHERWIN-WILLIAMS CO. WETHER PERFECT EXT OIL UNDERCOATER Y24W538 31.1 P2495 $422.76 $6,342.94 RE-CERTIFICATION 6210315 7/6/2006 CERTIFIED

6/6/2006 SHERWIN-WILLIAMS CO. SUPER PAINT INT S/G LATEX A88W17 32.2 P2496 $490.16 $6,342.94 RE-CERTIFICATION 6210315 7/6/2006 CERTIFIED

6/6/2006 SHERWIN-WILLIAMS CO. A-100 EXTERIOR LATEX GLOSS A8W51 28.3 P2497 $668.40 $6,342.94 CERTIFICATION 6210315 7/6/2006 CERTIFIED

6/6/2006 SHERWIN-WILLIAMS CO. PRO MAR 200 INT LATEX S/G B31W2200 SERIES B31W2251 32.2 P2498 $490.16 $6,342.94 CERTIFICATION 6210315 7/6/2006 CERTIFIED

6/13/2006 DURON PAINTS ULTRA DELUX EXT 100% ACRYLIC LATEX FLAT 66-91411 2.9 P2499 $790.27 $2,406.90 RE-CERTIFICATION 6208703 7/3/2006 CERTIFIED

6/13/2006 DURON PAINTS MAX-BOND WATERBORNE ACRYLIC SURFACE CONDITIONER 80-07511 14.3 P2500 $754.66 $2,406.90 RE-CERTIFICATION 6208703 7/3/2006 CERTIFIED

6/13/2006 DURON PAINTS DURA CLAD DIRECT TO METAL ACRYLIC HIGH GLOSS 95-30011 26.4 P2501 $861.97 $2,406.90 RE-CERTIFICATION 6208703 7/3/2006


INC.VINA FLAT INTERIOR LATEX WALL PAINT 400 1.8 P2502 $444.12 $444.12 RE-CERTIFICATION 09000 7/20/2006 CERTIFIED


INC.AQUATEC WATERBORNE INDUSTRIAL ACRYLIC PRIMER 1636 25.1 P2503 $505.47 $505.47 CERTIFICATION 08828 7/13/2006


INC.AQUATEC WATERBORNE INDUSTRIAL ACRYLIC ENAMEL 1600 26.4 P2504 $681.77 $681.77 CERTIFICATION 08829 7/13/2006 CERTIFIED


INC.OPTIMA SUPER ACRYLIC EXTERIOR SEMI-GLOSS 350 27.2 P2505 $548.09 $548.09 RE-CERTIFICATION 08998 7/20/2006 CERTIFIED


INC.TROPICOAT HOUSE PAINT 100% ACRYLIC EXT S/G 320 28.3 P2506 $668.40 $668.40 RE-CERTIFICATION 08997 7/20/2006 CERTIFIED

7/20/2006 DURON PAINTSDURACLAD DIRECT-TO-METAL ACRYLIC COATING HIGH GLOSS NEUTRAL

BASE 95-304-1126.3 P2507 N/A N/A

COMPLAINT

BROWARD COUNTY

PUBLIC SCHOOLS

N/A N/A

7/20/2006 DURON PAINTSDURACLAD DIRECT-TO-METAL ACRYLIC COATING HIGH GLOSS 914 WHITE

95-300-1126.3 P2508 N/A N/A

COMPLAINT

BROWARD COUNTY

PUBLIC SCHOOLS

N/A N/A

7/20/2006 DURON PAINTSDURACLAD DIRECT-TO-METAL ACRYLIC COATING HIGH GLOSS BROWARD

BLUE 904-0550-1126.3 P2509 N/A N/A

COMPLAINT

BROWARD COUNTY

PUBLIC SCHOOLS

N/A N/A


INC.

TI-GARD 1250 CONTRACTOR'S CHOICE LATEX MASONRY CHALKING

CONDITIONER14.3 P2510 $559.53 $559.53 RE-CERTIFICATION 08999 7/20/2006 CERTIFIED

8/8/2006 CORONADO PAINT CO., INC. RUST SCAT LATEX HIGH GLOSS ENAMEL 80-1 WHITE 26.3 P2511 N/A N/A

SUBMITTED BY

BROWARD COUNTY

PUBLIC SCHOOLS

N/A N/A

8/8/2006 CORONADO PAINT CO., INC. RUST SCAT LATEX HIGH GLOSS ENAMEL 80-1 37 OSHA BLUE 26.3 P2512 N/A N/A

SUBMITTED BY

BROWARD COUNTY

PUBLIC SCHOOLS

N/A N/A

9/7/2006 CORONADO PAINT CO., INC. SUPER KOTE 5000 ACRYLIC ENAMEL UNDERCOATER 1178-11 22.2 P2513 $588.84 $588.84 RE-CERTIFICATION 210950 9/6/2006


DATE


LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK



INC.OPTIMA PREMIUM ALL PRIME 100% PURE ACRYLIC LATEX #330

PRIMER

FOR MP-27P2514 N/A N/A

PRIMER FOR MP-27

SUBMITTED FOR

EXPOSURE TESTING

N/A N/A

9/20/2006 SHERWIN-WILLIAMS CO. DTM ACRYLIC GLOSS B66 W 111 26.3 P2515 N/A N/A

COMPLAINT

(SUBMITTED BY

BROWARD COUNTY

PUBLIC SCHOOLS)

N/A N/A

10/5/2006 SHERWIN-WILLIAMS CO. DTM ACRYLIC GLOSS B66 W 111 26.3 P2516 N/A N/A

COMPLAINT

(SUBMITTED BY

BROWARD COUNTY

PUBLIC SCHOOLS)

N/A N/A

10/9/2006 SHERWIN-WILLIAMS CO. LOXON MASONRY ET ACRYLIC PRIMER A24W300 30.1 P2517 N/A N/A RE-TEST FOR P-2494 N/A N/A CERTIFIED


INC.OPTIMA PREMIUM ALL PRIME 100% PURE ACRYLIC LATEX #330 22.2 P2518 $588.24 $588.24 CERTIFICATION 10501 9/12/2006


INC.VINA GLOSS INTERIOR LATEX SEMI GLOSS #420 29.2 P2519 $862.47 $862.47 CERTIFICATION 10502 9/12/2006

10/13/2006 FLEX BON PAINTS FLEX BON #95 SERIES PREMIUM S/G EXTERIOR CV10095WG 28.3 P2520 $899.81 $899.81 CERTIFICATION 6273398 9/12/2006 CERTIFIED

11/6/2006 CORONADO PAINT CO., INC. ACRYLIC MANSONRY SURFACE CONDITIONER 940-11 14.3 P2521 $754.66 $754.66 RE-CERTIFICATION 001646 12/12/2006 CERTIFIED

11/6/2006 CORONADO PAINT CO., INC. SUPER KOTE 5000 ACRYLIC ENAMEL UNDERCOATER 1178-11 22.2 P2522 N/A N/A RE-TEST FOR P-2513 N/A N/A CERTIFIED

11/6/2006 SHERWIN-WILLIAMS CO. QUALI-CRAFT EXT. LATEX HIGH GLOSS B21WV5710-1710 27.2 P2523 $710.21 $2,864.20 RE-CERTIFICATION 6305505 10/20/2006 CERTIFIED

11/14/2006 SHERWIN-WILLIAMS CO. PRO MAR 400 INT. LATEX EGG-SHELL B20W4451 6403-54270 29.2 P2524 $862.47 $2,864.20 RE-CERTIFICATION 6305505 10/20/2006 CERTIFIED

11/14/2006 SHERWIN-WILLIAMS CO. MASTER HIDE LATEX S/G B31WW5251-6011 32.2 P2525 $645.76 $2,864.20 RE-CERTIFICATION 6305505 10/20/2006 CERTIFIED

11/14/2006 SHERWIN-WILLIAMS CO. PRO MAR 400 INT LATEX S/G B31W4451 6403-54353 32.2 P2526 $645.76 $2,864.20 RE-CERTIFICATION 6305505 10/20/2006 CERTIFIED

12/6/2006 FLEX BON PAINTS FLEX BON CLASSIC INT/EXT FLAT CV10014WG 2.9 P2527 $790.27 $1,436.03 CERTIFICATION 3281 12/6/2006 CERTIFIED

12/6/2006 FLEX BON PAINTS FLEX BON PREMIUM INT SEMI GLOSS CV10097WG 95 SERIES 32.2 P2528 $645.76 $1,436.03 CERTIFICATION 3281 12/6/2006

1/8/2007 CORONADO PAINT CO., INC. RUST SCAT ACRYLIC METAL PRIMER 1036-211 25.1 P2529 $655.47 $2,025.00 RE-CERTIFICATION 215037 1/4/2007 CERTIFIED

1/8/2007 CORONADO PAINT CO., INC. RUST SCAT ACRYLIC GLOSS ENAMEL 80-1 26.4 P2530 $861.97 $2,025.00 RE-CERTIFICATION 215037 1/4/2007 CERTIFIED

1/8/2007 CORONADO PAINT CO., INC. GRIP & SEAL LATEX STAIN KILLER 116-11 38.1 P2531 $500.49 $2,025.00 RE-CERTIFICATION 215037 1/4/2007


INC.OPTIMA PREMIUM ALL PRIME 100% PURE ACRYLIC LATEX #330 22.2 P2532 N/A N/A RE-TEST FOR P-2518 N/A N/A


INC.VINA GLOSS INTERIOR LATEX SEMI GLOSS #420 29.2 P2533 N/A N/A RE-TEST FOR P-2519 N/A N/A CERTIFIED


INC.AQUATEC WATERBORNE INDUSTRIAL ACRYLIC PRIMER 1636 25.1 P2534 N/A N/A RE-TEST FOR P-2503 N/A N/A

Lab # 2535 was inadvertendly not

assigned to any sample. DD

3/22/07

Lab # 2535 was inadvertendly not assigned to any sample. DD 3/22/07 P2535

2/22/2007 FLEX BON PAINTS FLEX BON PREMIUM INT SEMI GLOSS CV10097WG 32.2 P2536 N/A N/A RE-TEST FOR P-2528 N/A N/A CERTIFIED

3/1/2007 DEVOE PAINTS DR 15 (01) WONDER SHIELD FLAT HOUSE PAINT 2.9 P2537 $790.27 $6,644.29 CERTIFICATION 01440218 1/12/2007 CERTIFIED

3/1/2007 DEVOE PAINTS DR 17 (01) WONDER SHIELD S/G HOUSE & TRIM PAINT 6.10 P2538 $951.41 $6,644.29 CERTIFICATION 01440218 1/12/2007 CERTIFIED

3/1/2007 DEVOE PAINTSDRH 65 (02) HYDRO-SHEER HYDROSEALER WATERBORNE PIGMENTED

BONDING SEALER14.3 P2539 $754.66 $6,644.29 CERTIFICATION 01440218 1/12/2007

3/1/2007 DEVOE PAINTS 4612 DEVFLEX HP WATERBORNE ACRYLIC S/G ENAMEL 26.3 P2540 $861.97 $6,644.29 CERTIFICATION 01440218 1/12/2007

3/1/2007 DEVOE PAINTS RG 65 (01) REGENCY EXT/INT ACRYLIC GLOSS ENAMEL 27.2 P2541 $710.21 $6,644.29 CERTIFICATION 01440218 1/12/2007

3/1/2007 DEVOE PAINTS DR 18 (01) WONDER SHIELD GLOSS HOUSE PAINT 28.3 P2542 $899.81 $6,644.29 CERTIFICATION 01440218 1/12/2007 CERTIFIED

3/1/2007 DEVOE PAINTS RG 64 (01) REGENCY INTERIOR ACRYLIC S/G ENAMEL DR 32.2 P2543 $645.76 $6,644.29 CERTIFICATION 01440218 1/12/2007 CERTIFIED

3/1/2007 DEVOE PAINTSDR 51801 PRIMZ 220 INT/EXT KILSTAIN WATERBORNE ALL PURPOSE STAIN

KILLER PRIMER/SEALER38.1 P2544 $500.49 $6,644.29 CERTIFICATION 01440218 1/12/2007

3/1/2007 DEVOE PAINTS DR 32 (01) WONDER PURE ODOR FREE INT EGGSHELL ENAMEL 39.2 P2545 $529.81 $6,644.29 CERTIFICATION 01440218 1/12/2007 CERTIFIED

3/9/2007 CORONADO PAINT CO., INC. GRIP & SEAL LATEX STAIN KILLER 116-11 38.1 P2546 N/A N/A RE-TEST FOR P2531 N/A N/A CERTIFIED

3/9/2007 CORONADO PAINT CO., INC. SUPER KOTE 5000 VINYL LATEX FLAT WALL 1.8 P2547 N/A N/A

TO BE USED IN RE-

TESTING P2531 FOR

STAIN BLOCK TEST

N/A N/A

3/13/2007 DEVOE PAINTS RG 65 (01) REGENCY EXT/INT ACRYLIC GLOSS ENAMEL 27.2 P2548 N/A N/A RE-TEST FOR P2541 N/A N/A CERTIFIED

4/4/2007 SOMAY PRODUCTS, INC. STERI-SHIELD FUNGISTATIC PAINT # 8630 47 P2549 $799.98 $799.98 CERTIFICATION 031891 3/30/2007

4/4/2007 SOMAY PRODUCTS, INC. SURFACE CONDITIONER S30-01

PRIMER

FOR MP-

47.0

P2550 N/A N/A PRIMER FOR MP-47.0 N/A N/A

4/24/2007 CORONADO PAINT CO., INC.ELASTITE SUPER STRETCH 20 MIL 100 % ACRYLIC ELASTOMERIC

WATERPROOF COATING 166 LINE 21.2 P2551 $740.91 $740.91 CERTIFICATION 218909 5/2/2007 CERTIFIED

5/1/2007 CORONADO PAINT CO., INC. STEP-SAVER ANTI-SLIP COATING 50 LINE 34 P2552 $532.85 $1,335.00 CERTIFICATION 002060 5/1/2007 CERTIFIED

5/1/2007 CORONADO PAINT CO., INC. PREMIUM GOLD COLLECTION FLAT ACRYLIC HOUSE TRIMTABLE 10-1 2.9 P2553 $790.27 $1,335.00 CERTIFICATION 002060 5/1/2007 CERTIFIED

5/1/2007 CORONADO PAINT CO., INC. CRYLICOTE GOLD COLLECTION ACRYLIC HOUSE TRIMABLE 410-11 PRIMER P2554 N/A N/APRIMER FOR

EXTERIOR EXPOSUREN/A N/A

5/14/2007 SHERWIN-WILLIAMS CO. CONFLEX XL ASW451 EXTRA WHITE 6405-15615 21.2 P2555 $740.91 N/A CERTIFICATION N/A N/A CERTIFIED

5/14/2007 SHERWIN-WILLIAMS CO. LOXON CONDITIONER A24W100 (6403-15958) PRIMER P2556 N/A N/A PRIMER N/A N/A

5/14/2007 DURON PAINTS MAXFLEX PREMIUM ELASTOMERIC #80-925 21.2 P2557 $740.91 N/A CERTIFICATION N/A N/A

5/14/2007 DURON PAINTS MAXBOND SURFACE CONDITIONER PRIMER P2558 N/A N/A PRIMER N/A N/A

6/7/2007 PPG PROSIDING PLUS EXTERIOR COATING 100% ACRYLIC 57-110 2.9 P2559 $790.27 $790.27 CERTIFICATION 0011157843 6/1/2007

6/7/2007 PPG PERMA-CRETE PIGMENTED MASONRY SURFACE SEALER 14.3 P2560 $754.66 N/A CERTIFICATION N/A N/A

6/7/2007 PPG PERMA-CRETE PITT-FLEX ELASTOMERIC COATING 4-110 21.2 P2561 $740.91 $740.91 CERTIFICATION 0011157845 6/1/2007 CERTIFIED


DATE


LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK


6/7/2007 PPGPITT-TECH INT/EXT 100% ACRYLIC HIGH GLOSS DTM INDUSTRIAL ENAMEL

90-37426.4 P2562 $861.97 $861.97 CERTIFICATION 0011157842 6/1/2007 CERTIFIED

6/7/2007 PPG SEAL GREAP INT/EXT 100% ACRYLIC UNIVERSAL PRIMER/SEALER 17-921 38.1 P2563 $500.49 $500.49 CERTIFICATION 0011157847 6/1/2007

6/7/2007 PPG PERMA-CRETE TEXTURE COATING 100% ACRYLIC 4-50 45 P2564 $649.89 N/A CERTIFICATION N/A N/A

6/12/2007 DEVOE PAINTS PRIMZ 220 EXT LATEX WOOD PRIMER/SEALER PRIMER P2565 N/A N/APRIMER FOR


6/25/2007 DEVOE PAINTSDRIT 65(2) HYDRO-SHUR HYDROSEALER WATERBORNE PIGAMENTED

BOADING SELAER14.3 P2566 N/A N/A RE-TEST FOR P2539 N/A N/A

6/25/2007 DEVOE PAINTS DEVFLEX QD 4208 QUICK DRY INT/EXT WATERBORNE GLOSS ENAMEL 26.4 P2567 N/A N/A RE-TEST FOR P2540 N/A N/A CERTIFIED

7/24/2007 PPG PROSIDING PLUS EXTERIOR COATING 100% ACRYLIC 57-110 2.9 P2568 N/A N/A RE-TEST FOR P2559 N/A N/A CERTIFIED

7/25/2007 DURON PAINTS MAXFLEX PREMIUM ELASTOMERIC #80-925 21.2 P2569 N/A N/A RE-TEST FOR P2557 N/A N/A


INC.TROPICOAT HOUSE PAINT 100% ACRYLIC EXT S/G 320 28.3 P2570 N/A N/A

COMPLAINT M-DCPS

CORAL REEF MACN/A N/A

8/28/2007 PPG PERMA-CRETE INT/EXT ALKALI-RESISTANT PRIMER 4-603 PRIMER P2571 N/A N/APRIMER FOR


8/28/2007 SOMAY PRODUCTS, INC. STERI-SHIELD FUNGISTATIC PAINT # 8630 47.1 P2572 N/A N/A RE-TEST FOR P2549 N/A N/A

8/28/2007 CORONADO PAINT CO., INC. SUPER KOTE 5000 ACRYLIC TRAFFIC PAINT # 66 9.5 P2573 $621.98 $621.98 CERTIFICATION 002464 9/4/2007 CERTIFIED

9/5/2007 DEVOE PAINTS DEVFLEX PF DIRECT TO METAL PRIMER AND FINISH PRIMER P2574 N/A N/APRIMER FOR



INC.TROPICOAT HOUSE PAINT ACRYLIC EXT 310 2.9 P2575 $790.27 $790.27 RE-CERTIFICATION 21701 7/26/2007 CERTIFIED


INC.EVERLASTIC ELASTOMERIC COATING # 1200 21.2 P2576 $740.91 $740.91 RE-CERTIFICATION 21703 7/26/2007

9/7/2007 PPG PITT-TECH INT/EXT 100% ACRYLIC PRIMER/FINISH DTM # 90-712 PRIMER P2577 N/A N/APRIMER FOR


9/12/2007 SOMAY PRODUCTS, INC. STERI-SHIELD FUNGISTATIC PAINT # 8630 47.1 P2578 N/A N/A RE-TEST FOR P2572 N/A N/A CERTIFIED

9/13/2007 CORONADO PAINT CO., INC. RUST-SCAT LATEX METAL PRIMER # 36-11 PRIMER P2579 N/A N/APRIMER FOR



INC.HIGH-BUILD 100 % ACRYLIC BLOCK FILLER INT/EXT # 3250 33.1 P2580 $501.62 $501.62 CERTIFICATION 24061 10/18/2007 CERTIFIED

12/3/2007 PRO TECH PRODUCTS EC-100 ACRYLIC ELASTOMERIC COATING 56.2 P2581 $840.87 $840.87 CERTIFICATION 18807 11/6/2007 CERTIFIED


INC.OPTIMA PREMIUM ALL PRIME 100% PURE ACRYLIC LATEX #330

PRIMER

FOR MP-2.9P2582 N/A N/A

PRIMER FOR


12/18/2007 CORONADO PAINT CO., INC. SUPER KOTE 5000 TOUGH-TEX FLAT ACRYLIC KNOCK DOWN FINISH 908-1 44.2 P2583 $540.89 $540.89 RE-CERTIFICATION 002935 1/15/2008 CERTIFIED

1/24/2008 FLEX BON PAINTS FLEX-PREP GRIP-IT INT/EXT LATEX BONDING PRIMER

PRIMER

FOR MP-

28.3

P2584PRIMER FOR

EXTERIOR EXPOSURE

2/1/2008 SHERWIN-WILLIAMS CO. PREP-RITE PRO BLOCK INT/EXT LATEX PRIMER SEALER

PRIMER

FOR MP-

28.3

P2585 N/A N/A

PRIMER FOR

EXTERIOR EXPOSURE

(MP-28)

N/A N/A

2/26/2008 SOMAY PRODUCTS, INC. ROOF MASTIC SEALER & PROTECTOR WHITE 842-01 56.1 P2586 $840.87 $840.87 CERTIFICATION 32904 2/26/2008


INC.

BRUNING/PACON SUPREME HOUSE & TRIM PAINT ACRYLIC SEMI-GLOSS

EXT. 371-00 WHITE 28.3 P2587 $899.81 $1,400.30 RE-CERTIFICATION 003366 4/1/2008


INC.AQUALUCK PLUS 100 % ACRYLIC WATER-BASED PRIMER SEALER AQ-U400

PRIMER

FOR MP-

28.3

P2588 N/A N/APRIMER FOR



INC.

BRUNING/PACON SUPREME HOUSE & TRIM PAINT ACRYLIC SEMI-GLOSS

EXT. 371-00 WHITE 28.3 P2589 N/A N/A RE-TEST FOR P2587 N/A N/A

4/10/2008 SOMAY PRODUCTS, INC. ROOF MASTIC SEALER & PROTECTOR WHITE 842-01 56.1 P2590 N/A N/A RE-TEST FOR P2586 N/A CERTIFIED

4/23/2008 PPG SEAL GRIP INT/EXT 100% ACRYLIC UNIVERSAL PRIMER/SEALER 17-921 38.3 P2591 N/A N/A RE-TEST FOR P2563 N/A N/A CERTIFIED

4/23/2008 PPG PRO-SIDING PLUS 100 % ACRYLIC LATEX EXT. COATING

TOPCOAT

FOR MP-38

STAIN

BLOCK

TEST (MP-

2.9)

P2592 N/A N/ATOPCOAT FOR MP-38

STAIN BLOCK TESTN/A N/A


INC.RUST SCAT POLYURETHANE HIGH GLOSS ENAMEL 31-1 WHITE 5.6 P2593 $658.76 $658.76 CERTIFICATION 003390 4/23/2008

4/29/2008 PPG INT/EXT URETHANE MODIFIED INDUSTRIAL ENAMEL GLOSS OIL 2-782 5.6 P2594 $658.76 $658.76 CERTIFICATION 0011677360 4/29/2008

4/16/2008 PPG EXTERIOR ACRYLIC MASONRY SEALER UC80013 14.3 P2595 $754.66 $754.66 RE-CERTIFICATION 0011641541 4/3/2008

5/7/2008 PPGSPEEDHIDE INT/EXT URETHANE MODIFIED INDUSTRIAL ENAMEL GLOSS OIL

6-7825.7 P2596 N/A N/A RE-TEST FOR P2594 N/A N/A CERTIFIED


DATE


LAB

NO.COST

VENDOR

PAYMENTDISPOSITION

VENDOR CHECK


5/7/2008 PPG EXTERIOR ACRYLIC PRIMER FOR WOOD STAIN KILLER # 714PRIMER


PRIMER FOR


5/7/2008 PPG ACRY-SHIELD ACRYLIC BONDING PRIMER # 515PRIMER

FOR MP-5.6P2598 N/A N/A

PRIMER FOR


5/7/2008 PPG EXTERIOR ACRYLIC MASONRY SEALER UC80013 14.3 P2599 N/A N/A RE-TEST FOR P2595 N/A N/A CERTIFIED

5/13/2008 PPG PURE PERFORMANCE FLAT INTERIOR LATEX 9-100 WHITE 1.8 P2600 N/A N/ATOPCOAT FOR MP-38


4/16/2008 PPG SPEEDHIDE INT ENAMEL SEMI-GLOSS ACRYLIC LATEX 6-500 32.2 P2601 $645.76 $645.76 RE-CERTIFICATION 0011641542 4/3/2008 CERTIFIED


INC.RUST SCAT POLYURETHANE HIGH GLOSS INT/EXT 31-1 WHITE 5.7 P2602 N/A N/A RE-TEST FOR P2593 N/A N/A CERTIFIED


INC.RUST SCAT ALKYD METAL PRIMER INT/EXT 35-111 WHITE

PRIMER


PRIMER FOR



INC.PREMIUM GOLD COLLECTION FLAT ACRYLIC HOUSE &TRIM 10-1 WHITE 2.9 P2604 N/A N/A

UNDERCOAT FOR MP-

38N/A N/A


INC.GRIP & SEAL LATEX STAIN KILLER 116-11 WHITE 38.2 P2605 N/A N/A

DEVELOPMENT OF

STANDARD

REFERENCE SAMPLE

FOR MP-38 STAIN

BLOCK TEST

N/A N/A


INC.VINA-FLAT INT LATEX WALL PAINT 400 WHITE 1.8 P2606 N/A N/A

TOPCOAT FOR MP-38



INC.

CRYLICOTE GOLD COLLECTION ACRYLIC HOUSE PAINT 410-11 BLOCKING

PRIMER38.3 P2607 $500.49 $1,400.30 CERTIFICATION 003366 4/1/2008 CERTIFIED

6/25/2008 BEHR PREMIUM PLUS MATE 1500PRIMER


UNDERCOAT FOR MP-

6N/A N/A

6/26/2008 PPGSUN PROOF 100 % ACRYLIC EXT HOUSE AND TRIM SEMI-GLOSS LATEX

SUPER WHITE 78-456.11 P2609 $951.41 $951.41 CERTIFICATION 0011677359 4/29/2008


INC.SUPERKOTE 5000 ACRYLIC SEMI-GLOSS 32-1 WHITE 32.2 P2610 $645.76 $645.76 CERTIFICATION 003422 5/20/2008 CERTIFIED


INC.

TI-GARD 1250 CONTRACTOR'S CHOICE LATEX MASONRY CHALKING

CONDITIONER14.3 P2611 N/A N/A

UNDERCOAT FOR

14.3N/A N/A

6/26/2008 PPGSUN PROOF 100 % ACRYLIC EXT HOUSE AND TRIM SEMI-GLOSS LATEX

SUPER WHITE 78-456.11 P2612 N/A N/A RE-TEST FOR P2609 N/A N/A

7/22/2008 SHERWIN-WILLIAMS CO. PREP-RITE PRO BLOCK INT/EXT LATEX PRIMER SEALER

PRIMER

FOR MP-

28.3

P2613 N/A N/A

PRIMER FOR

EXTERIOR EXPOSURE

(MP-28)

N/A N/A

7/22/2008 FLEX BON PAINTS FLEX BON #95 SERIES PREMIUM S/G EXTERIOR CV10095WG 28.3 P2614 N/A N/A

PAINT FOR EXTERIOR

EXPOSURE TEST

(P2520)

N/A N/A

7/16/2008 PPG SPEEDHIDE ACRYLIC SEMI-GLOSS LATEX 6-900TOPCOAT

FOR MP-14P2615 N/A N/A TOPCOAT FOR MP-14 N/A N/A

10/29/2001 DURON PAINTS FLAME CONTROL FIRE RETARDANT CLEAR SATIN VARNISH NO.166 43 N/A N/A N/A N/A N/A

10/29/2001 DURON PAINTS FLAME CONTROL FIRE RETARDANT CLEAR OVERCOAT NO.167 FOR 166 43 N/A N/A N/A N/A N/A

2/19/2002INTERNATIONAL FIRE RESISTANCE

SYSTEMS, INC.FIREFREE 88 42 N/A N/A N/A N/A N/A

FLAME CONTROL FLAME CONTROL FIRE RETARDANT PAINT NO. 20-20 41 N/A N/A N/A N/A N/A EXPIRED

FLAME CONTROL FLAME CONTROL FIRE RETARDANT PAINT NO. 40-40 42 N/A N/A N/A N/A N/A CERTIFIED

FLAME CONTROL FLAME CONTROL FIRE RETARDANT VARNISH SEALER NO.6 43 N/A N/A N/A N/A N/A CERTIFIED

FLAME CONTROL FLAME CONTROL FIRE RETARDANT CLEAR SATIN VARNISH NO.166 43 N/A N/A N/A N/A N/A CERTIFIED

FLAME CONTROL FLAME CONTROL FIRE RETARDANT CLEAR OVERCOAT NO.167 FOR 166 43 N/A N/A N/A N/A N/A CERTIFIED

% OF SOLIDS BY VOLUME PROPOSED ACCEPTANCE CRITERIA

Based on Manufacturer's Input & Website Information

Current

NVMW

Specification

Proposed

NVMV

Specification

Based On

How Many

Products?

MP-1.8 Latex-Base, Interior, Flat, White & Tints. 50% Min. 28% Min. 1

MP-2.9 Acrylic-Base, Exterior, Flat, White & Tints. 50% Min. 32% Min. 6

MP-3.8 Vinyl Latex Exterior Masonry Paint, White And Light Tints 48% Min. 34% Min. 1

MP-4.6 Interior, Alkyd, Semi-Gloss, White And Tints. 45% Min. 0

MP-5.7 Enamel, Alkyd, Gloss, White And Tints. 50% Min. 0

MP-6.11 Exterior-Interior Enamel, Latex-Base, Semi-Gloss, White And Tints 45% Min. 31% Min. 4

MP-9.5 Traffic Paint, Water Emulsion-Based 50% Min. 33% Min. 1

MP-14.4 Primer Coating, Latex Conditioner For Chalking Exterior Surfaces 13-19 % 18-23% 5

MP-15.1 Two Component Glaze, Gloss & Semi-Gloss, Solvent Base, For Interior Surface 75% Min. 0

MP-21.3 Elastomeric, Acrylic-Base, Exterior, Flat, White And Tints 59% Min. 50% Min. 1

MP-22.2 Exterior-Interior Primer/Sealer, Acrylic-Base, Flat, White 48% Min. 36% Min. 1

MP-23.1 Exterior-Interior, Anti-Slip, Solvent-Base, Flat, White And Colors 76% Min. 0

MP-24.1 Stain, Acrylic-Base, Exterior, Flat, Colors And Tints No Spec No Spec 1

MP-25.1 Acrylic-Base, Primer, Interior/Exterior, Metal Surfaces, Gray 50-55 % 35% Min. 1

MP-26.4 Acrylic-Base, Gloss Enamel, Direct-To-Metal, White And Tints No Spec 34% Min. 2

MP-27.2 Acrylic-Base, Gloss, Exterior, White & Tints 41% Min. 33% Min. 4

MP-28.3 Acrylic-Base, Semi-Gloss, Exterior, White And Tints 40% Min. 30% Min. 7

MP-29.2 Latex-Acrylic Base, Interior Enamel, Satin-Gloss, White And Tints 41% Min. 31.5% Min. 3

MP-30.1 Acrylic-Latex Base, Exterior, Flat, Wood Primer 21-30 % 34% Min. 2

MP-31.1 Solvent-Base, Exterior, Flat, Wood Primer 20-29 % 50% Min. 1

MP-32.3 Interior Enamel, Latex-Base, Semi-Gloss, White And Tints No Spec 32% Min. 8

MP-33.1 Block Filler, Latex-Base, Interior/Exterior, Flat, White 63% Min. 48% Min. 1

MP-34.0 Exterior/Interior, Anti-Slip, Water Borne Coating, White, Tints And Colors 50% Min. 38% Min. 1

MP-35.0

Interior-Exterior Corrosion Resistant, Water Based Direct-To-Metal Gloss Enamel,

White & Tints No Spec 34% Min. 2

MP-36.0

Interior-Exterior Corrosion Resistant, Water Based, Direct-To-Metal, Semi-Gloss,

Enamel, White & Tints No Spec 0

MP-37.0 Interior/Exterior Corrosion Resistant, Water Based, Primer 46% Min. 0

MP-38.3 Exterior/Interior, Alkali Resistant-Stain Block Universal Primer/Sealer, Acrylic-Base 43% Min. 37% Min. 3

MP-39.0 Latex-Base, Low Odor, Low VOC Eggshell, Interior White And Tints No Spec 39% Min. 2

MP-40.0

One Or Two Component Aliphatic Polyurethane Water Based, Zero Voc, Or Voc

Compliant, Odorless Clear And Tinted Gloss Or Satin 62-77 % 0

MP-44.2 Acrylic Base Interior Textured Coating Aggregate And Non-Aggregate No Spec 0

MP-45.3 Acrylic Base Exterior Textured Aggregated Coating No Spec 0

MP-47.1 Mold And Mildew Proof Acrylic Paint 42-70 % 39% Min. 4

MP-48.0 Epoxy Based Rust-Penetrating Pre-Primer No Spec 95% Min. 1

MP-49.0 Multipurpose Epoxy Top Coat No Spec 0

MP-51.0 High Solids Acrylic Polyurethane 40% Min. 0

MP-52.0 High Performance Bonding Primer No Spec 33% Min. 2

MP-53.0 Water Reducible High Performance Rust Inhibitive primer 45-55 % 33% Min. 2

MP-54.0

Acrylic-Base Epoxy (Single Component), Interior, Gloss Enamel, Multi-Surfaces, White &

Tints No Spec 0

MP-55.0

Acrylic-Base Urethane (Single Component), Exterior, Gloss Enamel, Multi-Surfaces,

White And Tints No Spec 0

MP-56.2 Elastomeric Roof Paint 50% Min. 0

FSPMA Paint Specifications

http://www.fspma.com/specs/specpbcc2

miami-dade county public schoolsmaterials.dadeschools.net/pdf/paint/fspma paint committee... ·...

Documents