micro 100 catalog

Mic

ro

100 cA

TALo

G 128 M

icr

o 100

INTERNATIONALLY ACCLAIMED

CATALOG

128

WILL NOT CHIP OR BREAK UNDER NORMAL MACHINING CONDITIONS

MICRO 100TOOL CORPORATION1410 E. Pine Avenue • Meridian, ID 83642208/888-7310 800/421-8065

FAX 208/888-2106www.micro100.com | [email protected]

CATALOG

128

MADE iN USA

©2008

Specifications and prices subject to change without notice.

1

Micro-Grain carbide +Plus ! is more than just a micro-grain carbide of excellent quality. It is ina class of its own, resulting from the ex-clusive Micro 100 treating process.

is a space age carbide with superior rupture strength for exceptional machining versatility.

is highly shock resistant, it will not chip or break under normal machining conditions and is unexcelled in interrupted cutting.

considerably prolongs tool life in machining all hard stainless steels, efficiently performs in exotic metals.

cuts tool steels that are heat treated, eliminating costly annealing.

provides for vastly increased speed and feed rates in cutting aluminum, copper, stainless steels, high temperature alloys, thermoplastics and composites used in the aircraft industry.

lets you rely on just one grade of carbide for machining most metals bet-ter and faster.

is internationally acclaimed by the leaders in industry.

1410 E. Pine Avenue • Meridian, ID 83642www.micro100.com • [email protected]

PRODUCT INDEXSolid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45

Brazed & Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176-180

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-31, 47

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 93

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172-175

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-153

Ball Nose, Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94-112 •DoubleEnd.............................112 •LongLength,ExtraLong,LongReach..........106-111 •Miniature.............................94-97 •StubLength....................94,95,100,112 • Tapered . . . . . . . . . . . . . . . . . . . . . . . 100, 101 •V-HemothVariableHelixEndMills..........119-120 BallNose,Metricspecialselection..................113-123

SquareEnd,Inch.............................50-93 •CornerRadius......................58,59,76-79 •CornerRounding. . . . . . . . . . . . . . . . . . . . . .90,91 •DoubleEnd.. . . . . . . . . . . . . . . . . . .64,65,90,91 •DrillMills,Drill PointEndMills . . . . . . . . . . . . 92,93 •LongLength,ExtraLong,LongReach . . . . . . . . .82-88 •Miniature . . . . . . . . . . . . . . . . . . . . . . . . . .50-53 •SHREDDERRoughingEndMills............113-115 •StubLength..........50,51,54,55,62,64,68-71 •V-HemothVariableHelixEndMills..........116-118 • Tapered . . . . . . . . . . . . . . . . . . . . . . . . . 62, 63

SquareEnd,Metricspecialselection.................132-153

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162-167

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 10, 11

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 18 Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-37

ACME THREADING TOOLS

BACK CHAMFERING TOOLS

BLANKS

BORING BARS

BORING TOOLS

BOX-TURNING TOOLS

BRAZED TOOLS

COMBINED DRILLS & COUNTERSINKS

CUT-OFF BLADES

CUT-OFF TOOLS

DIE SINKING CUTTERS

DRILL MILLS

DRILLS

END MILLS

ENGRAvING TOOLS

FACE GROOvE TOOLS

FORMING TOOLS

FULL RADIUS GROOvE TOOLS

2

3

GROOvE TOOLS

HALF-ROUND BLANKS

INSERTS

INTERNAL THREADING TOOLS

MINIATURE BORING TOOLS

MOLDMAKING RUNNER CUTTERS

O-RING GROOvE TOOLS

RADIUS TOOLS

RETAINING RING GROOvE TOOLS

ROUND BLANKS

ROUTERS

RUNNER CUTTERS

SCREw MACHINE TOOLS

SINGLE FLUTE ROUTERS

SpADE DRILLS

SpLIT END BLANKS

SpOTTING AND CENTERING DRILLS

STEEL HOLDERS

"T" BLADES

THREAD MILLS

THREAD RELIEF TOOLS

THREADING TOOLS

TOOL HOLDERS

TURNING TOOLS

UNDERCUT GROOvE TOOLS

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-41, 46

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

Indexable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-46

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-17Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168, 169

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-34, 46

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178, 179

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159, 161

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160, 161

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176, 177

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

For Solid Carbide Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155-158

Brazed & Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 154Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-46

For Solid Carbide Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8, 10, 11, 19

Solid Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38, 39

PRODUCT INDEX

4

TOOl NUmbER PREfIX INDEX

aecm

aemm

al

alm

amrm

ar

arb

arc

arm

asm

bb

bbl

bed

bel

bem

bl

bll

blr

bmhm

bmr

bmrm

bms

br

bt

btl

144

142, 143

6

88

132, 133

6

102, 103

76-79

72-75

68-71

26-31, 47

26-31

112

108, 109

98, 99

6

106, 107

110, 111

130, 131

96, 97

122, 123

94, 95

6

19

19

prefix page prefix pageprefix page

c

cl

cpg

cr

cre

crt

ct

d

dc

dm

dr

dsc

e

el

emd

emh

ems

er

fg

fr

frt

gec

gel

gem

gll

glr

7, 10, 11

14

181

14

90, 91

15

9

7

175

92, 93

172

170

8

8

65

66, 67

60, 61

8

40

35-37

15

58, 59

84, 85

56, 57

82, 83

86, 87

gr

gs

hbb

hmbm

hmcm

hmrm

hmsm

hmum

hr

iat

idlt

idrt

it

itl

lbc

lc

lt

ltr

mbb

mbc

mem

mmbm

mmrm

mrf

mrt

mtr

18

18

24, 25

121

148,149

147

145

146

176

45

9

9

42, 43, 46

42, 43

48

10, 11

10, 11

49

23

48

89

124, 125

134, 137

171

171

49

5

TOOl NUmbER PREfIX INDEX

Numeric blanks

or

pb

rad

ral

rc

rda

rdb

rdc

rdd

rde

rme

rNc

rNmm

rNrm

rr

rrl

rs

rsc

rsf

rt

rtc

rxd

rxl

180

41

22

16

16

10, 11

159

159

159

159

159

52, 53

162-167

150, 151

152, 153

32-34, 46

32-34

176, 177

162-167

168, 169

10, 11, 172

162-167

17

17

sal

sar

shl

shr

sat

sbm

sd

sdh

sed

sem

sfa

sfbm

sfl

sfp

sfrm

sme

spd

spg

sr

stb

115

115

114

113

44

104, 105

174

80, 81

64

54, 55

152

126-129

161

161

138-141

50, 51

173

181

178, 179

180

t

tbb

tbbl

td

teb

tem

th

tm

tmm

tp

tpg

trg

tsb

tsm

uc

up

Vhb

Vhm

Vlb

Vlm

Vlr

12, 13

21

21

181

101

63

41

154-157

158

181

181

20

100

62

38

39

119

116

120

117

118

prefix page prefix pageprefix page

48or

more

7.50 7.70 8.15 8.55 8.8016.2522.70

8.00 8.20 8.65 9.05 9.3016.7523.20

24to47

8.50 8.70 9.15 9.55 9.8017.2523.70

12to23

9.509.70

10.1510.5510.8018.2524.70

6to11

10.5010.7011.1511.5511.8019.2525.70

1to5

1/641/641/641/321/321/321/32

tip

1/4 5/16

3/8 7/16

1/25/83/4

3/161/41/41/41/43/8

7/16

1/16 1/16

1/81/81/8

5/32 3/16

22-1/42-1/2

33-1/2

44-1/2

1/4 5/16

3/8 7/16

1/25/83/4

1/4 5/16

3/8 7/16

1/25/83/4

BA TC W L R

shaNK

al-4 al-5 al-6 al-7 al-8

al-10 al-12

ar-4 ar-5 ar-6 ar-7 ar-8

ar-10 ar-12

dimeNsioNs QuaNtitY – price each

STANDARD bRAZED TOOlSStyle AR and AL

Style BR and BL

6

Style ARshown

Style blshown

QuaNtitY – price eachdimeNsioNs

48or

more

8.30 8.80 9.3016.7522.95

br-6 br-7 br-8

br-10 br-12

bl-6 bl-7 bl-8

bl-10 bl-12

A

3/8 7/16

1/25/83/4

2-1/23

3-1/24

4-1/2

C

shaNK

T

1/81/81/8

5/32 3/16

W

1/41/41/43/8

7/16

8.80 9.309.80

17.2523.45

24to47

9.30 9.8010.3017.7523.95

12to23

10.3010.80

11.3018.7524.95

6to11

11.30 11.80 12.3019.7525.95

1to5

1/641/321/321/321/32

R

tip

1/21/25/83/4

13/16

L

3/8 7/16

1/25/83/4

B

right haNdTooLNo.

left haNdTooLN0.

right haNdTooLNo.

left haNdTooLN0.

QuaNtitY – price each

48or

more

dimeNsioNs

d-4 d-5 d-6 d-7 d-8

d-10 d-12

toolNo.

1/21/25/83/4

13/165/8

13/16

LW

3/87/161/25/83/45/83/4

1/8 1/8 1/8 5/32 3/16 5/32 3/16

T

tipshaNK

C

2-1/23

3-1/24

4-1/24

4-1/2

B

3/8 7/161/25/83/45/83/4

A

3/8 7/161/25/83/45/83/4

6to11

1to5

12to23

24to47

Style C

Style D

7


48or

more

7.70 8.30 8.65 8.80 9.2018.5023.60

tip

1/4 5/16

3/8 7/161/25/83/4

A B

1/4 5/16

3/8 7/16

1/25/83/4

shaNK

C

22-1/42-1/2

33-1/2

44-1/2

1/16 1/16 1/8 1/8 1/8

5/32 3/16

T

1/45/163/8

7/161/25/83/4

W L

1/45/163/87/161/25/83/4

1to5

10.70 11.30 11.65 11.80 12.2021.5026.60

9.70 10.30 10.65 10.80 11.2020.5025.60

12to23

8.70 9.30 9.65 9.80

10.2019.5024.60

6to11

24to47

8.20 8.80 9.15 9.30 9.7019.0024.10

c-4 c-5 c-6 c-7 c-8

c-10 c-12

dimeNsioNs

toolNo.

STANDARD bRAZED TOOlS

10.50 10.95 11.40 11.60 11.8019.2024.90

9.50 9.95

10.40 10.60 10.8018.2023.90

8.50 8.959.40

9.609.80

17.2022.90

8.00 8.458.90

9.10 9.3016.7022.40

7.50 7.95 8.40 8.60 8.8016.2021.90

Style E

Style ER and EL

8

Style Elshown


48or

more

7.95 8.40 8.8516.2020.80

tip

5/163/81/25/83/4

A B

5/163/81/25/83/4

shaNK

C

2-1/42-1/23-1/2

44-1/2

3/32 3/32

1/8 5/32 3/16

T

5/163/81/25/83/4

W L

3/81/21/25/83/4

1to5

10.95 11.40 11.8519.2023.80

9.95 10.40 10.8518.2022.80

12to23

8.95 9.40 9.8517.2021.80

6to11

24to47

8.45 8.90 9.3516.7021.30

e-5 e-6 e-8

e-10 e-12

dimeNsioNs

toolNo.


48or

more

er-5 er-6 er-8

er-10 er-12

8.809.15

10.3515.6519.80

24to47

9.30 9.65

10.8516.1520.30

12to23

9.80 10.15 11.3516.6520.80

6to11

10.80 11.15 12.3517.6521.80

1to5

11.80 12.1513.3518.6522.80

1/21/25/83/4

13/16

1/41/41/4

5/32 13/16

LW

1/81/81/8

5/32 3/16

T

1/16 1/16 3/32 3/32

1/8

F

tipshaNK

2-1/23

3-1/24

4-1/2

C

3/87/161/25/83/4

B

3/87/161/25/83/4

A

el-5 el-6 el-8

el-10 el-12

dimeNsioNsright haNdTooLNo.

left haNdTooLN0.



48or

moretoolNo.

19.5020.3020.1026.8533.15

24to47

20.0020.8020.6027.3533.65

12to23

20.5021.3021.1027.8534.15

6to11

21.5022.3022.1028.8535.15

1to5

22.5023.3023.1029.8536.15

3/81/21/25/83/4

5/163/81/85/83/4

LW

3/32 3/321/8

5/32 3/16

T

2-1/42-1/23-1/2

44-1/2

D

tipshaNK

2-1/42-1/23-1/2

44-1/2

C

111

1-1/41-1/2

B

5/163/81/25/83/4

A

ct-122ct-120ct-121ct-130ct-140

dimeNsioNs

Styles IDRT and IDLT

Style CT

9

Style IDRT shown


48or

more19.2519.2520.6020.60

0.5001.0000.7501.250

1to5

22.2522.2523.6023.60

21.2521.2522.6022.60

12to23

20.2520.2521.6021.60

6to11

24to47

19.7519.7521.1021.10

idrt-60idrt-61idrt-80idrt-81

.450

.450

.575

.575

shaNK

C

2-1/22-1/23-1/23-1/2

3/83/81/21/2

3/83/81/21/2

idlt-60idlt-61idlt-80idlt-81

dimeNsioNs

BA

miN. thread

dia.NecK

leNgth


right haNdTooLNo.

left haNdTooLN0.

bRAZED SCREw mAChINE TOOlSTurning, forming, & Cut-Off

Right & left hand

All tools are ground with the required clearance angles.

Price: In quantities of 12 pieces per size and per style. For fewer number of pieces add $.75 each.

CUT-OFF TOOLS: Carbide protrusion = 3 times thickness specified. Tolerance on thickness +.000 –.010”.

left haNd tool No.tYpe

RT-312C -312RC-312040RC-312060RC-312080RC-312100

*Ground to 6 mm square shank.

LT-312C -312LC-312040LC-312060LC-312080LC-312100

RT-250C -250RC-250040RC-250060

——

right haNd tool No.

LT-250C -250LC-250040LC-250060

——

left haNd tool No.

right haNd tool No.

RT-281C -281RC-281040RC-281060RC-281080RC-281100

LT-281C -281LC-281040LC-281060LC-281080LC-281100

right haNd tool No.

left haNd tool No.

TURNINGFoRMINGCUT-oFFCUT-oFFCUT-oFFCUT-oFF

.040”

.060”

.080”

.100”

WidthW

ToolDescription

priced in quantities of 12 pieces per size and per style. For fewer number of pieces add $.75 each.

left haNd tool No.tYpe

WidthW

RT-375C -375RC-375040RC-375060RC-375080RC-375100RC-375120

LT-375C -375LC-375040LC-375060LC-375080LC-375100LC-375120

RT-437C -437

—RC-437060RC-437080RC-437100RC-437120

left haNd tool No.

right haNd tool No.

right haNd tool No.

LT-437C -437

—LC-437060LC-437080LC-437100LC-437120

RT-500C -500

—RC-500060RC-500080RC-500100RC-500120

right haNd tool No.

LT-500C -500

—LC-500060LC-500080LC-500100LC-500120

left haNd tool No.

TURNINGFoRMINGCUT-oFFCUT-oFFCUT-oFFCUT-oFFCUT-oFF

.040”

.060”

.080”

.100”

.120”

1/2”SquareShank6”Long,$15.30 ea.


3/8”SquareShank6”Long,$11.85 ea.ToolDescription


10

STyLE LC

STyLE LT

*1/4”SquareShank6”Long,$11.10 ea.



Turning, forming, & Cut-Off, for CNC Screw machinesRight & left hand

All tools are ground with the required clearance angles.

Price: In quantities of 12 pieces per size and per style. For fewer number of pieces add $.75 each.

CUT-OFF TOOLS: Carbide protrusion = 3 times thickness specified, 3/8” maximum. Tolerance on thickness +.000 –.010”.

11

STyLE RT

STyLE RC

tYpe

TURNINGFoRMINGCUT-oFFCUT-oFFCUT-oFFCUT-oFFCUT-oFF

LT-750C -750LC-750060LC-750080LC-750100LC-750125LC-750187

RT-750C -750RC-750060RC-750080RC-750100RC-750125RC-750187

left haNd tool No.

right haNdtool No.

LT-625C -625LC-625060LC-625080LC-625100LC-625125LC-625187

left haNd tool No.

RT-625C -625RC-625060RC-625080RC-625100RC-625125RC-625187

right haNd tool No.

.060”

.080”

.100”

.125”

.187”

ToolDescription


WidthW

bRAZED SCREw mAChINE TOOlS



Tips are hollow ground all over for longer tool life

t-100t-101t-102t-103

t-104t-105t-106t-107

t-108t-109t-110

t-111t-112t-113

t-115t-116

1/16 5/64 3/321/8

3/321/8

5/32 3/16

1/8 5/32 3/16

1/8 5/32 3/16

1/8 3/16

48 ormore


24 to 4712 to 236 to 111 to 5LHWtool

Number

Double End “T” blades for Double Performance

bRAZED CUT-Off blADES

12

Hardened and precision ground

steel blades

“T” styled over entire blade length to fit all “T” type holders

1/2

11/16

3/4

7/8

1-1/8

4-1/2

5

5

6

6

41.2541.2539.7039.70

44.30

46.10

47.95

54.70

39.7539.7538.2038.20

42.80

44.60

46.45

53.20

38.2538.2536.7036.70

41.30

43.10

44.95

51.70

37.2537.2535.7035.70

40.30

42.10

43.95

50.70

36.2536.2534.7034.70

39.30

41.10

42.95

49.70

Double End “T” blades for Double Performance with V-Groove

13

Hardened and precision ground

steel blades

“T” styled over entire blade length to fit all “T” type holders

Tips are hollow ground all over for longer tool life

t-100-Vt-101-Vt-102-Vt-103-V

t-104-Vt-105-Vt-106-Vt-107-V

t-108-Vt-109-Vt-110-V

t-111-Vt-112-Vt-113-V

t-115-Vt-116-V

1/16 5/64 3/321/8

3/321/8

5/32 3/16

1/8 5/32 3/16

1/8 5/32 3/16

1/8 3/16

48 ormore


24 to 4712 to 236 to 111 to 5LHWtool

Number

bRAZED CUT-Off blADES

1/2

11/16

3/4

7/8

1-1/8

47.3047.3045.4045.40

4-1/2

5

5

6

6

50.05

51.95

53.75

60.45

45.8045.8043.90 43.90

48.55

50.45

52.25

58.95

44.3044.3042.4042.40

47.05

48.95

50.75

57.45

43.3043.3041.4041.40

46.05

47.95

49.75

56.45

42.3042.3040.4040.40

55.45

45.05

48.75

46.95

Tips are hollow ground all over for improved chip control

bRAZED CUT-Off blADESfor brown & Sharpe Automatics, P & w holders,

and Dovetail Slot holders

hardened Steel blades

14

Style CRFor: Vertical Slide — backward l.H. back Slide — High back R.H. Front Slide — low Front R.H.

Style CLFor: Vertical Slide — Forward R.H. back Slide — low back l.H. Front Slide — High Front l.H.

48 or more


12 to 236 to 111 to 5L

33.5032.2032.20

HW

5/64 3/321/8

3/321/8

5/32 3/16

3/321/8

5/32 3/16

3/321/8

3/16

cr-101cr-102cr-103

cr-104cr-105cr-106cr-107

cr-108cr-109cr-110cr-111

cr-113cr-114cr-115

cl-101cl-102cl-103

cl-104cl-105cl-106cl-107

cl-108cl-109cl-110cl-111

cl-113cl-114

—

dimeNsioNs

24 to 47

1/2

11/16

13/16

1

4-1/2

6

5

6

35.05

38.10

41.00

32.0030.7030.70

33.55

36.60

39.50

30.5029.2029.20

32.05

35.10

38.00

29.5028.2028.20

31.05

34.10

37.00

28.5027.2027.20

36.00

33.10

30.05

right haNdTooLNo.

lefthaNdTooLN0.

bRAZED RADIUS TOOlSfull Radius Concave

15

full Radius Convex

crt-1crt-2crt-3crt-4crt-6crt-8

price each

35.5535.5535.5538.6038.6043.45

3/83/83/81/21/23/4

3/32 3/32 3/32

1/81/8

3/16

2-1/22-1/22-1/23-1/23-1/24-1/2

3/83/83/81/21/23/4

1/32 1/16 3/321/8

3/161/4

LT RCA

1/161/8

3/161/43/81/2

WB

3/83/83/81/21/23/4

toolNumber

dimeNsioNsshaNK tip

frt-1 frt-2 frt-3

frt-4 frt-5 frt-6

frt-8 frt-10 frt-12

price each

35.20

35.2035.2038.25

38.2540.7043.05

3/8

3/83/81/2

1/25/83/4

3/32

3/32 3/321/8

1/8 5/32 3/16

2-1/2

2-1/22-1/23-1/2

3-1/24

4-1/2

3/8

3/83/81/2

1/25/83/4

1/32 1/16 3/32

1/8 5/32 3/16

1/4 5/16

3/8

LT RCA

1/16 1/8

3/16

1/4 5/16

3/8

1/25/83/4

WB

3/8

3/83/81/2

1/25/83/4

toolNumber

dimeNsioNsshaNK tip

bRAZED RADIUS TOOlSConcave Radius

16

Style RAD shown

rad-1 rad-2 rad-3 rad-4





price each

Setof4:1/16,1/8,1/4,3/8radius *Setof8:1/32to1/4radiusin1/32increments Setof8:1/16to1/2radiusin1/16increments Setof16:1/32to1/2radiusin1/32increments

*All3/8”squareshanks,idealforuseonchuckers.

32.25

1/32 1/16 3/321/8

5/32 3/16 7/321/4

9/32 5/1611/32

3/8

13/32 7/1615/32

1/2

LT RCA

ral-1 ral-2 ral-3 ral-4





B

dimeNsioNs

shaNK tip

3/8 3/8

3/8 3/8

1/2 1/2

3/4 3/4

2-1/2

2-1/2

3-1/2

4-1/2

3/8

3/8

1/2

3/4

3/32

3/32

1/8

3/16

32.25

35.05

39.50

124.90243.65254.80498.50

right haNdTooLNo.

left haNdTooLNo.

BRAZED RADIUS TOOLS

RxD-1 RxD-2 RxD-3 RxD-4





PRICE EACH

Set of 4: 1/16, 1/8, 1/4, 3/8 radius *Set of 8: 1/32 to 1/4 radius in 1/32 increments Set of 8: 1/16 to 1/2 radius in 1/16 increments Set of 16: 1/32 to 1/2 radius in 1/32 increments

*All 3/8” square shanks, ideal for use on chuckers.

LT rRIgHt HAnDTooL No. cA

Convex Radius

17

Rxl-1 Rxl-2 Rxl-3 Rxl-4





lEft HAnDTooL No.

Style RXDshown

b

DIMEnSIOnS

SHAnK tIP

1/32 1/16 3/321/8

5/32 3/16 7/321/4

9/32 5/1611/32

3/8

13/32 7/1615/32

1/2

3/8 3/8

3/8 3/8

1/2 1/2

3/4 3/4

2-1/2

2-1/2

3-1/2

4-1/2

3/8

3/8

1/2

3/4

3/32

3/32

1/8

3/16

32.25

32.25

35.05

39.50

124.90243.65254.80498.50

Other widths and/or radii also available

gR-012002gR-012f gR-018002gR-018fgR-022002gR-022f gR-028002gR-028f

gR-038002gR-038f gR-040002gR-040f gR-046002gR-046f gR-054002gR-054f



gR-114002gR-114f gR-120002gR-120f gR-122002gR-122f

gS-012002gS-012f gS-018002gS-018f gS-022002gS-022f gS-028002gS-028f




gS-114002gS-114f gS-120002gS-120f gS-122002gS-122f

.012/.014

.012/.014

.018/.020

.018/.020

.022/.024

.022/.024

.028/.030

.028/.030

.038/.040

.038/.040

.040/.042

.040/.042

.046/.048

.046/.048

.054/.056

.054/.056

.060/.062

.060/.062

.068/.070

.068/.070

.072/.074

.072/.074

.080/.082

.080/.082

.086/.088

.086/.088

.090/.092

.090/.092

.096/.098

.096/.098

.102/.104

.102/.104

.114/.116

.114/.116

.120/.122

.120/.122

.122/.124

.122/.124

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.003 max.Full

.030

.030

.060

.060

.090

.090

.090

.090

.120

.120

.150

.150

.150

.150

.180

.180

.210

.210

.210

.210

.240

.240

.270

.270

.270

.270

.300

.300

.300

.300

.400

.400

.400

.400

.400

.400

.400

.400

gROOVE WIDtH RADIUSStYlE gSStYlE gRMAxIMUM

DEPtH Of CUt PRICE EACH

tOOl nUMBER

21.0024.3021.0024.3021.0024.3021.0024.30

21.0024.3021.0024.3021.0024.3021.0024.30

21.0024.3021.0024.3021.0024.3021.0024.30

21.0024.3021.0024.3021.0024.3021.0024.30

21.0024.3021.0024.3021.0024.30

BRAZED GROOVE TOOLS

18

Groove, Relief, and O.D. Cutting

Style GR Style GS

BRAZED BOX-TURNING TOOLSFor Box-Turning up to 5/8” Depth per Pass

19

Style BTshown

HardenedShanks

RIgHt HAnDTooL No.

lEft HAnDTooL No. A b c T W L

1tO 5

6tO 11

12tO 23

24tO 47

SHAnK tIP

DIMEnSIOnS QUAntItY – PRICE EACH

1/4 5/16

3/8 7/16

1/2 9/16

5/8

3/16 3/16 5/16

3/83/81/21/2

1/81/8

3/16 3/16 3/16 3/16

1/4

1-1/21-3/4

2 2-1/42-1/22-3/4

3

1/4 5/16

3/8 7/16

1/2 9/16

5/8

1/4 5/16

3/8 7/16

1/2 9/16

5/8

Bt-4 Bt-5 Bt-6 Bt-7 Bt-8 Bt-9

Bt-10

Btl-4 Btl-5 Btl-6 Btl-7 Btl-8 Btl-9

Btl-10

48OR

MORE

Regrinding quotedupon request.

22.3524.1026.0027.1529.7532.8033.75

20.8522.6024.5025.6528.2531.3032.25

19.3521.1023.0024.1526.7529.8030.75

18.3520.1022.0023.1525.7528.8029.75

17.3519.1021.0022.1524.7527.8028.75

QUAntItY – PRICE EACH

1/4 5/16

3/8 7/16

1/25/8

2-1/23

3-1/2456

5/32 3/16 7/321/4

9/3211/32

1/16 3/32 3/32 3/32

1/8 5/32

1/4 5/163/8

7/161/25/8

1/43/83/81/21/25/8

1tO5

20.1520.9022.2524.0527.2528.60

18.6519.4020.7522.5525.7527.10

17.1517.9019.2521.0524.2525.60

tRg-4 tRg-5 tRg-6 tRg-7 tRg-8

tRg-10

DIMEnSIOnS

tOOln0. A b c T W L

6tO11

12OR

MORE

SHAnK tIP

BRAZED BORING BARS

20

Style TBBshown

Boring Bar Sets

Five Boring Bars1/4”, 3/8”, 1/2”, 5/8” and 3/4”

SEt no. tBB-5 106.25SEt no. tBBl-5 106.25

BRAZED BORING BARS

21

tBB-250tBB-312tBB-375tBB-500tBB-625tBB-750tBB-001

17.1517.9019.2524.2525.6026.9528.45

12OR

MORE

6tO11

18.6519.4020.7525.7527.1028.4529.95

1tO5

20.1520.9022.2527.2528.6029.9531.45

4 5 6 7 8 910

1/4 5/163/81/25/83/41

lEft HAnDTooL No.

RIgHt HAnDTooL No. A b

QUAntItY – PRICE EACH

tBBl-250tBBl-312tBBl-375tBBl-500tBBl-625tBBl-750tBBl-001

DIMEnSIOnS

SHAnK tIP

LWTc d1/4

5/16 5/16

1/25/85/8

13/16

3/161/41/41/41/41/4

7/16

1/16 1/16 1/16

1/81/81/8

3/16

0.3200.4130.4630.6250.7950.9351.233

1/8 5/32 3/16

1/4 5/16

3/81/2

BRAZED BORING TOOLSA lockdown groove completely encircles the tool so that the cutting point can be turned to any desired position.

Hardened and precision ground shanks.

22

22-3/82-3/4

2-3/16 2-21/32

3-1/8

2-3/8 2-15/16

3-1/2

2-1/42-5/8

3

2-5/8 3-3/16

3-3/4

33-3/44-1/2

2-1/42-5/8

—

2-5/8 3-3/16

3-3/4

33-3/44-1/2

3-3/8 4-5/16

5-1/4

3/41-1/8 1-1/2

15/161-13/32

1-7/8

1-1/8 1-11/16

2-1/4

3/41-1/8 1-1/2

1-1/8 1-11/16

2-1/4

1-1/2 2-1/4

3

3/41-1/8

—

1-1/8 1-11/16

2-1/4

1-1/2 2-1/4

3

1-7/8 2-13/16

3-3/4

5/16

3/8

7/16

5/16

3/8

7/16

5/16

7/16

9/16

11/16

PRICE EACH

PB-1 PB-2 PB-3

PB-4 PB-5 PB-6

PB-7 PB-8 PB-9

PB-10 PB-11 PB-12

PB-13 PB-14 PB-15

PB-16 PB-17 PB-18

PB-19 PB-20

—

PB-22 PB-23 PB-24

PB-25 PB-26 PB-27

PB-28 PB-29 PB-30

tOOl nUMBER

3/8

1/2

5/8

25.95

27.20

30.65

bA c d

DIMEnSIOnS

Shank Diameter –.0001 to –.0002”Minimum Bore Dia. +.000 –.002”Maximum Bore Depth +.025 –.000”Overall Length ±1/64”

Miniature Boring Tools

MInIMUMBORE DIAMEtER

d1

MAxIMUMBORE DEPtH

L2

.020

.025

.030

.035

.040

.045

.075

.100

.100

.100

.150

.150

Mbb-020075Mbb-025100Mbb-030100Mbb-035100Mbb-040150Mbb-045150

tOOl nUMBER

Miniature Boring Tool SetFurnished in fitted wood case.

Lockdown flat automatically locates tool on center.

BORING TOOLS

23

Left-hand boring tools also available upon request. Steel Holders, see Page 41.

tOOl nUMBER

.015

.020

.025

.030


d1

MBB-015050MBB-020075

MBB-025100MBB-030100

MBB-035100MBB-035150

MBB-040100MBB-040150

MBB-045100MBB-045150

PRICE EACH

MAxIMUMBORE DEPtH

L2

SHAnK DIAMEtERd2

30.85

1-1/21/8

OVERAll lEngtHL1

SEt no. MBB-0 $ 166.40

.040

.035

.045

.100

.050

.075

.100

.150

.100

.150

.100

.150

27.15

BORING TOOLS

24

Helical Back Rake Boring Tools

Shank diameter –.0001 to –.0002”Minimum bore dia. +.001 –.000”Maximum bore depth +.030 –.000”overall Length ±1/64”

Neck is centered to shank for use in jig boring machines. The helical grind provides an ideal top rake for better chip control.

HBB-020062 HBB-025062 HBB-025125 HBB-030125 HBB-030187

HBB-035125 HBB-035187 HBB-040187 HBB-040250 HBB-050312 HBB-060375 HBB-070437 HBB-080500 HBB-090500 HBB-100562 HBB-120625

HBB-1201000

.020

.025

.025

.030

.030

.035

.035

.040

.040

.050

.060

.070

.080

.090

.100

.120

.120

1/16 1/16

1/8 1/8

3/16

1/8 3/16 3/16

1/4 5/16

3/8 7/16

1/2 1/2

9/165/8 1

tOOl nUMBER


d1

OVERAll lEngtHL1

SHAnKDIAMEtER

d2

MAxIMUMBORE DEPtH

L2 PRICE EACH

1/8 1-1/2

26.90

Left-hand boring tools and other sizes also available upon request. Steel Holders, see Page 41.

nECKDIAMEtER

N

.015

.020

.020

.025

.025

.030

.030

.035

.035

.040

.050

.060

.070

.080

.090

.100

.100

20.75

BORING TOOLSHelical Back Rake Boring Tools

25

Left-hand boring tools and other sizes also available upon request. Steel Holders, see Page 41.

HBB-135750 HBB-1351000 HBB-1501000 HBB-1501250 HBB-1801000 HBB-1801250 HBB-1801500

HBB-2101000 HBB-2101250 HBB-2101500 HBB-2401000 HBB-2401500 HBB-2401750

HBB-3001000 HBB-3001500 HBB-3001750

HBB-3601000 HBB-3601500 HBB-3601750

HBB-3602000 HBB-3602250 HBB-3602500

HBB-4801500 HBB-4802000

HBB-4802500 HBB-4803000

HBB-4803500 HBB-4804000 HBB-4804500

3/411

1-1/41

1-1/41-1/2

11-1/41-1/2

11-1/21-3/4

11-1/21-3/4

11-1/21-3/4

22-1/42-1/2

1-1/22

2-1/23

3-1/24

4-1/2

22.20

45.75

89.10

70.70

64.40

58.95

24.10

32.95

tOOl nUMBER


d1

OVERAll lEngtHL1

SHAnKDIAMEtER

d2

MAxIMUMBORE DEPtH

L2 PRICE EACH

nECKDIAMEtER

N

3/16

1/4

3/8

1/2

1/2

1/2

5/16

3/8

2

2-1/2

4

3

4

6

2-1/2

2-1/2

.300

.360

.360

.480

.480

.480

.135

.135

.150

.150

.180

.180

.180

.210

.210

.210

.240

.240

.240

.250

.320

.320

.440

.440

.440

.110

.110

.130

.130

.160

.160

.160

.185

.185

.185

.215

.215

.215


BORING TOOLS

26


Style BB shown

Other sizes also available upon request. Steel Holders, see Page 41.

BB-050150BB-050200BB-050300BB-050400

BB-060150BB-060200BB-060300BB-060400BB-060500

BB-080150BB-080200BB-080300BB-080400BB-080500BB-080600

BB-100150BB-100200BB-100300BB-100400BB-100500BB-100600BB-100700

BB-110150BB-110200BB-110300BB-110400BB-110500BB-110600BB-110700

.150

.200

.300

.400

.150

.200

.300

.400

.500

.150

.200

.300

.400

.500

.600

.150

.200

.300

.400

.500

.600

.700

.150

.200

.300

.400

.500

.600

.700

RIgHt HAnD tOOl nO.

MIn.BOREDIA.d1

OVER-All

lEngtHL1

SHAnKDIA.d2

MAx. BORE DEPtH

L2

PRICEEACH

1/8 1-1/2 19.90

RIgHt HAnDtOOl nO.

BB-050150SBB-050200SBB-050300SBB-050400S

BB-060150SBB-060200SBB-060300SBB-060400SBB-060500S

BB-080150SBB-080200SBB-080300SBB-080400SBB-080500SBB-080600S

BB-100150SBB-100200SBB-100300SBB-100400SBB-100500SBB-100600SBB-100700S

BB-110150SBB-110200SBB-110300SBB-110400SBB-110500SBB-110600SBB-110700S

PRO-jEC-tIOn

P

.013

.015

.020

.028

.025

lEft HAnD tOOl nO.

BBl-050150BBl-050200BBl-050300BBl-050400

BBl-060150BBl-060200BBl-060300BBl-060400BBl-060500

BBl-080150BBl-080200BBl-080300BBl-080400BBl-080500BBl-080600

BBl-100150BBl-100200BBl-100300BBl-100400BBl-100500BBl-100600BBl-100700

BBl-110150BBl-110200BBl-110300BBl-110400BBl-110500BBl-110600BBl-110700

PRICEEACH

21.15

WItH RADIUS SHARP POInt

.050

.060

.080

.100

.110

BORING TOOLS

27

.250 .350 .500 .600 .700 .800

.250 .400 .500 .600 .700 .750 .800

.250 .400 .500 .600 .750 .9001.000

.350 .500 .600 .750 .9001.0001.1001.2501.500

.400 .500 .600 .700 .800 .9001.0001.1001.2001.300

.400 .500 .600 .700 .800 .9001.0001.1001.1501.2001.2501.4001.5001.600

2 3/16

1/4

5/16

2-1/2

2-1/2

.030

.035

.040

.045

.050

.058

.120

.140

.160

.180

.200

.230

BB-120250 BB-120350 BB-120500 BB-120600 BB-120700 BB-120800

BB-140250 BB-140400 BB-140500 BB-140600 BB-140700 BB-140750 BB-140800

BB-160250 BB-160400 BB-160500 BB-160600 BB-160750 BB-160900

BB-1601000

BB-180350 BB-180500 BB-180600 BB-180750 BB-180900

BB-1801000 BB-1801100 BB-1801250 BB-1801500

BB-200400 BB-200500 BB-200600 BB-200700 BB-200800 BB-200900

BB-2001000 BB-2001100 BB-2001200 BB-2001300

BB-230400 BB-230500 BB-230600 BB-230700 BB-230800 BB-230900

BB-2301000 BB-2301100 BB-2301150 BB-2301200 BB-2301250 BB-2301400 BB-2301500 BB-2301600

BBl-120250 BBl-120350 BBl-120500 BBl-120600 BBl-120700 BBl-120800

BBl-140250 BBl-140400 BBl-140500 BBl-140600 BBl-140700 BBl-140750 BBl-140800


BBl-1601000

BBl-180350 BBl-180500 BBl-180600 BBl-180750 BBl-180900

BBl-1801000 BBl-1801100 BBl-1801250 BBl-1801500


BBl-2001000 BBl-2001100 BBl-2001200 BBl-2001300


BBl-2301000 BBl-2301100 BBl-2301150 BBl-2301200 BBl-2301250 BBl-2301400 BBl-2301500 BBl-2301600

BB-120250S BB-120350S BB-120500S BB-120600S BB-120700S BB-120800S

BB-140250S BB-140400S BB-140500S BB-140600S BB-140700S BB-140750S BB-140800S


BB-1601000S

BB-180350S BB-180500S BB-180600S BB-180750S BB-180900S

BB-1801000S BB-1801100S BB-1801250S BB-1801500S


BB-2001000S BB-2001100S BB-2001200S BB-2001300S


BB-2301000S BB-2301100S BB-2301150S BB-2301200S BB-2301250S BB-2301400S BB-2301500S BB-2301600S

MIn.BOREDIA.d1

OVER-All

lEngtHL1

SHAnKDIA.d2

MAx. BORE DEPtH

L2

PRICEEACH

RIgHt HAnDtOOl nO.

lEft HAnD tOOl nO.

PRICEEACH


RIgHt HAnD tOOl nO.

PRO-jEC-tIOn

P


22.45

24.25

32.60

21.25

22.95

31.45

BORING TOOLS

28

BB-290500 BB-290600 BB-290750 BB-290900

BB-2901000 BB-2901100 BB-2901250 BB-2901350 BB-2901500 BB-2901600 BB-2901750

BB-320500 BB-320600 BB-320750 BB-320900

BB-3201000 BB-3201100 BB-3201250 BB-3201500 BB-3201600 BB-3201800

BB-3202000 BB-3202500 BB-3203000

BB-360500 BB-360600 BB-360750 BB-360900

BB-3601000 BB-3601150 BB-3601250 BB-3601500 BB-3601600 BB-3601800

BB-3602000 BB-3602500 BB-3603000

BB-490750 BB-4901000 BB-4901250 BB-4901500

BB-4902000 BB-4902500 BB-4902600 BB-4902750

BB-4903000 BB-4903500 BB-4904000 BB-4904500

.500 .600 .750 .9001.0001.1001.2501.3501.5001.6001.750

.500 .600 .750 .9001.0001.1001.2501.5001.6001.800

2.0002.5003.000

.500 .600 .750 .9001.0001.1501.2501.5001.6001.800

2.0002.5003.000

.7501.0001.2501.500

2.0002.5002.6002.750

3.0003.5004.0004.500

BBl-290500 BBl-290600 BBl-290750 BBl-290900

BBl-2901000 BBl-2901100 BBl-2901250 BBl-2901350 BBl-2901500 BBl-2901600 BBl-2901750

BBl-320500 BBl-320600 BBl-320750 BBl-320900


BBl-3202000 BBl-3202500 BBl-3203000

BBl-360500 BBl-360600 BBl-360750 BBl-360900


BBl-3602000 BBl-3602500 BBl-3603000

BBl-490750 BBl-4901000 BBl-4901250 BBl-4901500

BBl-4902000 BBl-4902500 BBl-4902600 BBl-4902750

BBl-4903000 BBl-4903500 BBl-4904000 BBl-4904500

5/16

3/8

1/2

2-1/2

2-1/2

4

2-1/2

4

3

4

6

.073

.080

.080

.090

.090

.123

.123

.123

BB-290500S BB-290600S BB-290750S BB-290900S

BB-2901000S BB-2901100S BB-2901250S BB-2901350S BB-2901500S BB-2901600S BB-2901750S

BB-320500S BB-320600S BB-320750S BB-320900S


BB-3202000S BB-3202500S BB-3203000S

BB-360500S BB-360600S BB-360750S BB-360900S


BB-3602000S BB-3602500S BB-3603000S

BB-490750S BB-4901000S BB-4901250S BB-4901500S

BB-4902000S BB-4902500S BB-4902600S BB-4902750S

BB-4903000S BB-4903500S BB-4904000S BB-4904500S

MIn.BOREDIA.d1

OVER-All

lEngtHL1

SHAnKDIA.d2

MAx. BORE DEPtH

L2

PRICEEACH

RIgHt HAnDtOOl nO.

lEft HAnD tOOl nO.

PRICEEACH


RIgHt HAnD tOOl nO.

PRO-jEC-tIOn

P


.290

.320

.320

.360

.360

.490

.490

.490

32.60 31.45

44.55 43.30

56.95 55.70

44.55 43.30

56.95 55.70

62.10 60.90

68.10 66.85

85.45 84.25

COATED BORING TOOLS

29



Style BB shown


BB-050150gBB-050200gBB-050300gBB-050400g

BB-060150gBB-060200gBB-060300gBB-060400gBB-060500g

BB-080150gBB-080200gBB-080300gBB-080400gBB-080500gBB-080600g

BB-100150gBB-100200gBB-100300gBB-100400gBB-100500gBB-100600gBB-100700g

BB-110150gBB-110200gBB-110300gBB-110400gBB-110500gBB-110600gBB-110700g

.150

.200

.300

.400

.150

.200

.300

.400

.500

.150

.200

.300

.400

.500

.600

.150

.200

.300

.400

.500

.600

.700

.150

.200

.300

.400

.500

.600

.700

RIgHt HAnD tOOl nO.

MIn.BOREDIA.d1

OVER-All

lEngtHL1

SHAnKDIA.d2

MAx. BORE DEPtH

L2

1/8 1-1/2 22.10

RIgHt HAnDtOOl nO.

BB-050150SgBB-050200SgBB-050300SgBB-050400Sg

BB-060150SgBB-060200SgBB-060300SgBB-060400SgBB-060500Sg

BB-080150SgBB-080200SgBB-080300SgBB-080400SgBB-080500SgBB-080600Sg

BB-100150SgBB-100200SgBB-100300SgBB-100400SgBB-100500SgBB-100600SgBB-100700Sg

BB-110150SgBB-110200SgBB-110300SgBB-110400SgBB-110500SgBB-110600SgBB-110700Sg

PRO-jEC-tIOn

P

.013

.015

.020

.028

.025

lEft HAnDtOOl nO.

BBl-050150gBBl-050200gBBl-050300gBBl-050400g

BBl-060150gBBl-060200gBBl-060300gBBl-060400gBBl-060500g

BBl-080150gBBl-080200gBBl-080300gBBl-080400gBBl-080500gBBl-080600g

BBl-100150gBBl-100200gBBl-100300gBBl-100400gBBl-100500gBBl-100600gBBl-100700g

BBl-110150gBBl-110200gBBl-110300gBBl-110400gBBl-110500gBBl-110600gBBl-110700g

23.35


tin COAtEDPRICE EACH


.050

.060

.080

.100

.110

COATED BORING TOOLS

30

BB-120250g BB-120350g BB-120500g BB-120600g BB-120700g BB-120800g

BB-140250g BB-140400g BB-140500g BB-140600g BB-140700g BB-140750g BB-140800g


BB-1601000g

BB-180350g BB-180500g BB-180600g BB-180750g BB-180900g

BB-1801000g BB-1801100g BB-1801250g BB-1801500g


BB-2001000g BB-2001100g BB-2001200g BB-2001300g


BB-2301000g BB-2301100g BB-2301150g BB-2301200g BB-2301250g BB-2301400g BB-2301500g BB-2301600g

.250 .350 .500 .600 .700 .800

.250 .400 .500 .600 .700 .750 .800

.250 .400 .500 .600 .750 .9001.000

.350 .500 .600 .750 .9001.0001.1001.2501.500

.400 .500 .600 .700 .800 .9001.0001.1001.2001.300

.400 .500 .600 .700 .800 .9001.0001.1001.1501.2001.2501.4001.5001.600

2 3/16

BBl-120250g BBl-120350g BBl-120500g BBl-120600g BBl-120700g BBl-120800g

BBl-140250g BBl-140400g BBl-140500g BBl-140600g BBl-140700gBBl-140750gBBl-140800g


BBl-1601000g

BBl-180350g BBl-180500g BBl-180600g BBl-180750g BBl-180900g

BBl-1801000g BBl-1801100g BBl-1801250g BBl-1801500g




BBl-2301000g BBl-2301100g BBl-2301150g BBl-2301200g BBl-2301250g BBl-2301400g BBl-2301500g BBl-2301600g

1/4

5/16

2-1/2

2-1/2

.030

.035

.040

.045

.050

.058

BB-120250Sg BB-120350Sg BB-120500Sg BB-120600Sg BB-120700Sg BB-120800Sg

BB-140250Sg BB-140400Sg BB-140500Sg BB-140600Sg BB-140700Sg BB-140750Sg BB-140800Sg


BB-1601000Sg

BB-180350Sg BB-180500Sg BB-180600Sg BB-180750Sg BB-180900Sg

BB-1801000Sg BB-1801100Sg BB-1801250Sg BB-1801500Sg




BB-2301000Sg BB-2301100Sg BB-2301150Sg BB-2301200Sg BB-2301250Sg BB-2301400Sg BB-2301500Sg BB-2301600Sg

MIn.BOREDIA.d1

OVER-All

lEngtHL1

SHAnKDIA.d2

MAx. BORE DEPtH

L2

RIgHt HAnDtOOl nO.

lEft HAnD tOOl nO.


RIgHt HAnD tOOl nO.

PRO-jEC-tIOn

P




.120

.140

.160

.180

.200

.230

25.45 24.25

27.30 26.05

37.30 36.05

COATED BORING TOOLS

31

BB-290500g BB-290600g BB-290750g BB-290900g

BB-2901000g BB-2901100g BB-2901250g BB-2901350g BB-2901500g BB-2901600g BB-2901750g

BB-320500g BB-320600g BB-320750g BB-320900g


BB-3202000g BB-3202500g BB-3203000g

BB-360500g BB-360600g BB-360750g BB-360900g


BB-3602000g BB-3602500g BB-3603000g

BB-490750g BB-4901000g BB-4901250g BB-4901500g

BB-4902000g BB-4902500g BB-4902600g BB-4902750g

BB-4903000g BB-4903500g BB-4904000g BB-4904500g

.500 .600 .750 .9001.0001.1001.2501.3501.5001.6001.750

.500 .600 .750 .9001.0001.1001.2501.5001.6001.800

2.0002.5003.000

.500 .600 .750 .9001.0001.1501.2501.5001.6001.800

2.0002.5003.000

.7501.0001.2501.500

2.0002.5002.6002.750

3.0003.5004.0004.500


BBl-2901000g BBl-2901100g BBl-2901250g BBl-2901350g BBl-2901500g BBl-2901600g BBl-2901750g



BBl-3202000g BBl-3202500g BBl-3203000g



BBl-3602000g BBl-3602500g BBl-3603000g




5/16

3/8

1/2

2-1/2

2-1/2

4

2-1/2

4

3

4

6

.073

.080

.080

.090

.090

.123

.123

.123

37.30

49.35

63.85

49.35

63.85

66.95

76.70

94.40


BB-2901000Sg BB-2901100Sg BB-2901250Sg BB-2901350Sg BB-2901500Sg BB-2901600Sg BB-2901750Sg



BB-3202000Sg BB-3202500Sg BB-3203000Sg



BB-3602000Sg BB-3602500Sg BB-3603000Sg




MIn.BOREDIA.d1

OVER-All

lEngtHL1

SHAnKDIA.d2

MAx. BORE DEPtH

L2


RIgHt HAnDtOOl nO.

lEft HAnD tOOl nO.


RIgHt HAnD tOOl nO.

PRO-jEC-tIOn

P


36.05

48.15

62.60

48.15

62.60

68.25

75.50

93.20


.290

.320

.320

.360

.360

.490

.490

.490

For Retaining Ring Grooves

Shank Diameter –.0001 to –.0002”Minimum Hole Dia. +.000 –.005”Maximum Hole Depth +.050 –.000”Overall Length ±1/64”

GROOVE TOOLS

32


RR-017-4 RR-017-6 RR-017-8

RR-017-10

RR-025-4 RR-025-6 RR-025-8

RR-025-10

RR-030-4 RR-030-6 RR-030-8

RR-030-10

RR-033-4 RR-033-6 RR-033-8

RR-033-12

RR-038-4 RR-038-6 RR-038-8

RR-038-12

gROOVEtOOl WIDtH

W

MAxIMUM HOlE DEPtH

L2 PRICE EACH

MInIMUM HOlE DIA.

d1

OVERAlllEngtH

L1

PROjECtIOnP

SHAnKDIAMEtER

d2

1/43/81/25/8

1/43/81/25/8

1/43/81/25/8

1/43/81/23/4

1/43/81/23/4

1/4

5/16

2-1/2

2-1/2

.250

.312

.050

.100

28.30

35.35

RIgHt HAnD tOOl nO.

lEft HAnD tOOl nO.RRl-017-4 RRl-017-6 RRl-017-8

RRl-017-10

RRl-025-4 RRl-025-6 RRl-025-8

RRl-025-10

RRl-030-4 RRl-030-6 RRl-030-8

RRl-030-10

RRl-033-4 RRl-033-6 RRl-033-8

RRl-033-12

RRl-038-4 RRl-038-6 RRl-038-8

RRl-038-12


Style RR shown

.017/.018

.025/.026

.030/.031

.033/.034

.038/.039


33


1/43/81/23/41

1-1/4

1/43/81/23/41

1-1/4

1/43/81/23/41

1-1/4

1/43/81/23/41

1-1/4

1/43/81/23/41

1-1/4

1/43/81/23/41

1-1/4

RR-039-4 RR-039-6 RR-039-8

RR-039-12 RR-039-16 RR-039-20

RR-046-4 RR-046-6 RR-046-8

RR-046-12 RR-046-16 RR-046-20

RR-055-4 RR-055-6 RR-055-8

RR-055-12 RR-055-16 RR-055-20

RR-062-4 RR-062-6 RR-062-8

RR-062-12 RR-062-16 RR-062-20

RR-069-4 RR-069-6 RR-069-8

RR-069-12 RR-069-16 RR-069-20

RR-087-4 RR-087-6 RR-087-8

RR-087-12 RR-087-16 RR-087-20

46.10.100.375 2-1/23/8

GROOVETOOL WIDTH

W

MAXIMuM HOLE DEpTH

L2 pRICE EACH

MINIMuM HOLE DIA.

D1

OVERALLLENGTH

L1

pROJECTIONP

SHANK DIAMETER

D2

RIGHT HAND TOOL NO.

LEfT HAND TOOL NO.RRL-039-4 RRL-039-6 RRL-039-8

RRL-039-12 RRL-039-16 RRL-039-20

RRL-046-4 RRL-046-6 RRL-046-8

RRL-046-12 RRL-046-16 RRL-046-20

RRL-055-4 RRL-055-6 RRL-055-8

RRL-055-12 RRL-055-16 RRL-055-20

RRL-062-4 RRL-062-6 RRL-062-8

RRL-062-12 RRL-062-16 RRL-062-20

RRL-069-4 RRL-069-6 RRL-069-8

RRL-069-12 RRL-069-16 RRL-069-20

RRL-087-4 RRL-087-6 RRL-087-8

RRL-087-12 RRL-087-16 RRL-087-20

GROOVE TOOLS

.039/.041

.046/.048

.055/.057

.062/.064

.069/.071

.087/.089



34


RR-093-8 RR-093-12 RR-093-16 RR-093-20 RR-093-24

RR-125-8 RR-125-12 RR-125-16 RR-125-20 RR-125-24

RR-156-8 RR-156-12 RR-156-16 RR-156-20 RR-156-24

RR-187-8 RR-187-12 RR-187-16 RR-187-20 RR-187-24

RR-250-8 RR-250-12 RR-250-16 RR-250-20 RR-250-24

64.65 31/2 .150 .500

1/23/41

1-1/41-1/2

1/23/41

1-1/41-1/2

1/23/41

1-1/41-1/2

1/23/41

1-1/41-1/2

1/23/41

1-1/41-1/2

GROOVETOOL WIDTH

W

MAXIMuM HOLE DEpTH

L2 pRICE EACH

MINIMuM HOLE DIA.

D1

OVERALLLENGTH

L1

pROJECTIONP

SHANK DIAMETER

D2

RIGHT HAND TOOL NO.

LEfT HAND TOOL NO.RRL-093-8

RRL-093-12 RRL-093-16 RRL-093-20 RRL-093-24

RRL-125-8 RRL-125-12 RRL-125-16 RRL-125-20 RRL-125-24





Style RR shown

GROOVE TOOLS


.093/.095

.125/.127

.156/.158

.187/.189

.250/.252

For Full Radius Grooves


35

TOOLNuMBERfR-017-4 fR-017-6 fR-017-8

fR-017-10

fR-025-4 fR-025-6 fR-025-8

fR-025-10

fR-030-4 fR-030-6 fR-030-8

fR-030-10

fR-033-4 fR-033-6 fR-033-8

fR-033-10

fR-038-4 fR-038-6 fR-038-8

fR-038-10

GROOVETOOL WIDTH

W

MAXIMuM HOLE DEpTH

L2 pRICE EACH

MINIMuM HOLE DIA.

D1

OVERALLLENGTH

L1

pROJECTIONP

SHANKDIAMETER

D2

1/43/81/25/8

1/43/81/25/8

1/43/81/25/8

1/43/81/25/8

1/43/81/25/8

1/4

5/16

2-1/2

2-1/2

.250

.312

.050

.100

32.55

40.65

Left-hand groove tools and other sizes also available upon request. Steel Holders, see Page 41.

GROOVE TOOLS

.017/.018

.038/.039

.033/.034

.030/.031

.025/.026



36

fR-039-4 fR-039-6 fR-039-8

fR-039-12 fR-039-16 fR-039-20

fR-046-4 fR-046-6 fR-046-8

fR-046-12 fR-046-16 fR-046-20

fR-055-4 fR-055-6 fR-055-8

fR-055-12 fR-055-16 fR-055-20

fR-062-4 fR-062-6 fR-062-8

fR-062-12 fR-062-16 fR-062-20

fR-069-4 fR-069-6 fR-069-8

fR-069-12 fR-069-16 fR-069-20

fR-087-4 fR-087-6 fR-087-8

fR-087-12 fR-087-16 fR-087-20

1/43/81/23/41

1-1/4

1/43/81/23/41

1-1/4

1/43/81/23/41

1-1/4

1/43/81/23/41

1-1/4

1/43/81/23/41

1-1/4

1/43/81/23/41

1-1/4

51.503/8 2-1/2.375 .100

TOOLNuMBER

GROOVETOOL WIDTH

W

MAXIMuM HOLE DEpTH

L2 pRICE EACH

MINIMuM HOLE DIA.

D1

OVERALLLENGTH

L1

pROJECTIONP

SHANKDIAMETER

D2


GROOVE TOOLS

.039/.041

.046/.048

.055/.057

.062/.064

.069/.071

.087/.089

37


GROOVE TOOLS

fR-093-8 fR-093-12 fR-093-16 fR-093-20 fR-093-24

fR-125-8 fR-125-12 fR-125-16 fR-125-20 fR-125-24

fR-156-8 fR-156-12 fR-156-16 fR-156-20 fR-156-24

fR-187-8 fR-187-12 fR-187-16 fR-187-20 fR-187-24

fR-250-8 fR-250-12 fR-250-16 fR-250-20 fR-250-24

70.85

1/23/41

1-1/41-1/2

1/23/41

1-1/41-1/2

1/23/41

1-1/41-1/2

1/23/41

1-1/41-1/2

1/23/41

1-1/41-1/2

31/2 .150.500

TOOLNuMBER

GROOVETOOL WIDTH

W

MAXIMuM HOLE DEpTH

L2 pRICE EACH

MINIMuM HOLE DIA.

D1

OVERALLLENGTH

L1

pROJECTIONP

SHANKDIAMETER

D2



.093/.095

.125/.127

.156/.158

.187/.189

.250/.252


GROOVE TOOLS

38

Undercut Groove Tools


MAXIMuM HOLE DEpTH

L2 pRICE EACH

SHANKDIAMETER

D2

OVERALL LENGTH

L1

MINIMuMHOLE DIA.

D1

pROJECTIONPTOOL NuMBER

uC-25030-8 uC-25030-16

uC-31050-8 uC-31050-16 uC-31062-16 uC-31062-20

uC-37062-16 uC-37062-20 uC-37093-16 uC-37093-20 uC-37125-16 uC-37125-20

uC-50062-16 uC-50062-24 uC-50093-16 uC-50093-24 uC-50125-16 uC-50125-24

.050/.052

.050/.052

.062/.064

.062/.064

.062/.064

.062/.064

.093/.095

.093/.095

.125/.127

.125/.127

.062/.064

.062/.064

.093/.095

.093/.095

.125/.127

.125/.127

1/21

1/211

1-1/4

11-1/4

11-1/4

11-1/4

11-1/2

11-1/2

11-1/2

.260

Shank Diameter –.0001 to –.0002”Maximum Hole Depth +.050 –.000”Overall Length ±1/64”

1/4

.325 5/16

.385 3/8

.510 1/2 3

2-1/2

.050

.100

.150

.030/.032

Other sizes also available upon request.TOOL

WIDTHW

29.40

36.65

48.30

67.75

39

GROOVE TOOLSUndercut & Profile Groove Tools


Shank Diameter –.0001 to –.0002”Maximum Hole Depth +.050 –.000”Overall Length ±1/64”

TOOLWIDTH

W

MAXIMuM HOLE DEpTH

L2 pRICE EACH

SHANKDIAMETER

D2

OVERALL LENGTH

L1

MINIMuM HOLE DIA.

D1


up-25030-8 up-25030-16

up-31050-8 up-31050-16 up-31062-16 up-31062-20

up-37062-16 up-37062-20 up-37093-16 up-37093-20 up-37125-16 up-37125-20

up-50062-16 up-50062-24 up-50093-16 up-50093-24 up-50125-16 up-50125-24

.050/.052

.050/.052

.062/.064

.062/.064

.062/.064

.062/.064

.093/.095

.093/.095

.125/.127

.125/.127

.062/.064

.062/.064

.093/.095

.093/.095

.125/.127

.125/.127

1/21

1/211

1-1/4

11-1/4

11-1/4

11-1/4

11-1/2

11-1/2

11-1/2

.260 1/4

.325 5/16

.385 3/8

.510 1/2 3

2-1/2

.050

.100

.150

.030/.032

Other sizes also available upon request.

33.80

42.10

53.85

74.25

Face Groove Tools


GROOVE TOOLS

Shank Diameter –.0001 to –.0002”Projection +.020 –.000”Overall Length ±1/64”

40

TOOL WIDTHW pRICE EACH

SHANKDIAMETER

D2

OVERALLLENGTH

L

MINIMuMGROOVE DIA.

D1


fG-250-020fG-250-030fG-250-040fG-250-050

fG-312-030fG-312-040fG-312-050fG-312-062

fG-375-030fG-375-062fG-375-093fG-375-125

fG-500-062fG-500-093fG-500-125fG-500-156

fG-625-062fG-625-093fG-625-125fG-625-156fG-625-187

fG-750-062fG-750-093fG-750-125fG-750-156fG-750-187fG-750-250

.020/.022

.030/.032

.040/.042

.050/.052

.030/.032

.040/.042

.050/.052

.062/.064

.030/.032

.062/.064

.093/.095

.125/.127

.062/.064

.093/.095

.125/.127

.156/.158

.062/.064

.093/.095

.125/.127

.156/.158

.187/.189

.062/.064

.093/.095

.125/.127

.156/.158

.187/.189

.250/.252

.260 1/4

.320 5/16

.385 3/8

.510 1/2 3

2-1/2

.050

.050

.050

.050

.075

.050

.075

.100

.100

.075

.100

.100

.100

.075

.100

.100

.100

.150

.075

.100

.100

.100

.150

.250


.635

.760

5/8

3/4

3-1/2

4

22.75

31.10

43.25

49.05

79.90

127.20

Heat treated and precision ground.Two lockdowns at 90° for secure fastening.*

*Except on TH-84, TH-104 and TH-204 having only ONE set screw.

Steel Holders

For “O” Ring Grooves

41


TOOLNuMBER pRICE EACH

INSIDEDIAMETER

D1

OuTSIDE DIAMETER

D2

TH-84 TH-85 TH-86 TH-87 TH-88

TH-104TH-105TH-106TH-107TH-108

TH-204TH-205TH-206TH-207TH-208TH-210

1/8 3/161/4

5/163/8

1/8 3/161/4

5/163/8

1/8 3/161/4

5/163/81/2

25.00

31.00

GROOVE TOOL WIDTH

W

MAXIMuM HOLE DEpTH

L2

RADIuSR pRICE EACH

SHANKDIAMETER

D2

OVERALL LENGTH

L1

MINIMuM HOLE DIA.

D1

pROJECTIONP

TOOLNuMBEROR-096-8 OR-141-9

OR-144-10

OR-174-12 OR-208-13 OR-241-15

.096/.098

.141/.143

.144/.146

.174/.176

.208/.210

.241/.243

1/2 9/165/8

3/413/1615/16

.010/.020

.035/.045

.035/.045

.010/.020

.035/.045

.035/.045

28.30

46.55

.100

.115

.250

.375

2-1/2

1/4

3/8

T.I.R. Maximum .002”

GROOVE TOOLS


1/2

5/8

3/4

60° Internal Threading ToolsShank Diameter –.0001 to –.0002”Minimum Hole Dia. +.000 –.005”Depth +.050 –.000”Overall Length ±1/64”Radius ±.001”

THREADING TOOLS

42

Style IT shown

IT-040075IT-040100IT-040150

IT-050100IT-050150IT-050200

IT-060200IT-060250IT-060300

IT-080250 IT-080350 IT-080500

IT-100250 IT-100350 IT-100500 IT-100600

IT-120250 IT-120400 IT-120500 IT-120600 IT-120750

IT-140250 IT-140400 IT-140500 IT-140750

IT-160250 IT-160400 IT-160500 IT-160750

IT-1601000

0.0750.1000.150

0.1000.1500.200

0.2000.2500.300

0.2500.3500.500

0.2500.3500.5000.600

0.2500.4000.5000.6000.750

0.2500.4000.5000.750

0.2500.4000.5000.7501.000

1/8


ITL-040075ITL-040100ITL-040150

ITL-050100ITL-050150ITL-050200

ITL-060200ITL-060250ITL-060300

ITL-080250 ITL-080350 ITL-080500

ITL-100250 ITL-100350 ITL-100500 ITL-100600

ITL-120250 ITL-120400 ITL-120500 ITL-120600 ITL-120750

ITL-140250 ITL-140400 ITL-140500 ITL-140750

ITL-160250 ITL-160400 ITL-160500 ITL-160750

ITL-1601000

.080

.100

.120

.140

.160

.020

.025

.030

.035

.040

.012

.014

.017

.020

.023

SHANK DIAMETER

D2

OVERALLLENGTH

L1

RIGHT HANDTOOL NO.

DEpTHL2 pRICE EACH

pROJECTIONP

LEfT HANDTOOL NO.

MINIMuM HOLE DIA.

D1

OffSET pOINT

Y

.040

.050

.060

.015

.020

.020

.009

.012

.012


3/16

1-1/2

2

33.10

28.85

26.25

28.00

60° Internal Threading Tools

43

IT-180350 IT-180500 IT-180750

IT-1801000

IT-200400 IT-200600 IT-200750

IT-2001000

IT-230400 IT-230600 IT-230750

IT-2301000 IT-2301500

IT-290500 IT-290750

IT-2901000 IT-2901250 IT-2901750

IT-320500 IT-320750

IT-3201000 IT-3201250 IT-3201800

IT-360500 IT-360750

IT-3601000 IT-3601250 IT-3601800

IT-490750 IT-4901500 IT-4902000

0.3500.5000.7501.000

0.4000.6000.7501.000

0.4000.6000.7501.0001.500

0.5000.7501.0001.2501.750

0.5000.7501.0001.2501.800

0.5000.7501.0001.2501.800

0.7501.5002.000

1/4

5/16

3/8

1/2

2-1/2

2-1/2

2-1/2

3

29.95

37.40

48.75

68.40

ITL-180350 ITL-180500 ITL-180750

ITL-1801000

ITL-200400 ITL-200600 ITL-200750

ITL-2001000

ITL-230400 ITL-230600 ITL-230750

ITL-2301000 ITL-2301500

ITL-290500 ITL-290750

ITL-2901000 ITL-2901250 ITL-2901750

ITL-320500 ITL-320750

ITL-3201000 ITL-3201250 ITL-3201800

ITL-360500 ITL-360750

ITL-3601000 ITL-3601250 ITL-3601800

ITL-490750 ITL-4901500 ITL-4902000

SHANK DIAMETER

D2

OVERALLLENGTH

L1

RIGHT HANDTOOL NO.

DEpTHL2 pRICE EACH

pROJECTIONP


LEfT HANDTOOL NO.

MINIMuM HOLE DIA.

D1

OffSET pOINT

Y


Style IT shown

THREADING TOOLS

.180

.230

.290

.360

.490

.320

.200

.040

.045

.055

.070

.075

.085

.120

.023

.026

.032

.040

.043

.049

.069

Shank Diameter –.0001 to –.0002”Minimum Hole Dia. +.000 –.005”Depth +.050 –.000”Overall Length ±1/64”Radius ±.001”

Stub ACME Threading Tools29° Included Angle

0.4000.6000.7501.000

0.5000.7501.0001.2501.750

0.5000.7501.0001.2501.800

0.7501.5002.000

0.7501.5002.000

0.7501.5002.000

0.7501.5002.000

0.7501.5002.000

0.7501.5002.000

SAT-400-16 SAT-600-16 SAT-750-16

SAT-1000-16

SAT-500-14 SAT-750-14

SAT-1000-14 SAT-1250-14 SAT-1750-14

SAT-500-12 SAT-750-12

SAT-1000-12 SAT-1250-12 SAT-1800-12

SAT-750-10 SAT-1500-10 SAT-2000-10

SAT-750-9 SAT-1500-9 SAT-2000-9

SAT-750-8 SAT-1500-8 SAT-2000-8

SAT-750-7 SAT-1500-7 SAT-2000-7

SAT-750-6 SAT-1500-6 SAT-2000-6

SAT-750-5 SAT-1500-5 SAT-2000-5

fLATF

DEpTHL2

pROJECTIONP

THREADSpER INCH

pRICEEACH

TOOLNuMBER

OVERALLLENGTH

L1

SHANKDIAMETER

D2

2-1/21/4

Shank Diameter –.0001 to –.0002”Minimum Hole Dia. +.000 –.005”Depth +.050 –.000”Flat ±.001”Overall Length ±1/64”


44

Steel Holders, see Page 41.

MINIMuMHOLE DIA.

D1

5/16

3/8

1/2

2-1/2

3

2-1/2

THREADING TOOLS

.200

.490

.360

.235

.024

.079

.065

.055

.048

.042

.037

.033

.028

.045

.070

.085

.120

16

5

6

7

8

9

10

12

14

29.95

37.00

48.75

68.40

Internal ACME Threading Tools29° Included Angle


45

0.4000.6000.7501.000

0.5000.7501.0001.2501.750

0.5000.7501.0001.2501.800

0.7501.5002.000

0.7501.5002.000

0.7501.5002.000

0.7501.5002.000

IAT-400-16 IAT-600-16 IAT-750-16

IAT-1000-16

IAT-500-14 IAT-750-14

IAT-1000-14 IAT-1250-14 IAT-1750-14

IAT-500-12 IAT-750-12

IAT-1000-12 IAT-1250-12 IAT-1800-12

IAT-750-10 IAT-1500-10 IAT-2000-10

IAT-750-8 IAT-1500-8 IAT-2000-8

IAT-750-6 IAT-1500-6 IAT-2000-6

IAT-750-5 IAT-1500-5 IAT-2000-5

Steel Holders, see Page 41.

fLATF

DEpTHL2

pROJECTIONP

THREADSpER INCH

pRICEEACH

TOOLNuMBER

OVERALLLENGTH

L1

SHANKDIAMETER

D2

MINIMuMHOLE DIA.

D1

1/4

5/16

3/8

1/2

2-1/2

2-1/2

2-1/2

3

29.95

THREADING TOOLS

Shank Diameter –.0001 to –.0002”Minimum Hole Dia. +.000 –.005”Depth +.050 –.000”Flat ±.001”Overall Length ±1/64”

.200

.490

.255

.360

.021

.024

.028

.032

.041

.057

.069

.045

.120

.070

.085

16

5

6

8

10

12

14 37.00

48.75

68.40

Groove Tool SetsFor Retaining Ring Grooves

Furnished in fitted wood case.

Threading Tool Set60° Internal Threading ToolsFurnished in fitted wood case.

.017/.018

.025/.026

.030/.031

.030/.031

.038/.039

.038/.039

.050

.050

.050

.050

.100

.100

1/41/41/41/4

5/16 5/16

RR-017-4 RR-025-10

RR-030-8 RR-030-10

RR-038-8 RR-038-12

1/45/81/25/81/23/4

MAX. HOLE DEpTH

L2

GROOVE TOOL WIDTH

WpROJECTION

P

SHANK DIA.D2

OVERALLLENGTH

L1

46

SET No. RR-1 $183.50

MIN.HOLE DIA.

D1

.250

.250

.250

.250

.312

.312

.039/.041

.046/.048

.055/.057

.062/.064

.087/.089

.087/.089

RR-039-12RR-046-16RR-055-20RR-062-12RR-087-12RR-087-20

3/41

1-1/43/43/4

1-1/4

MAX. HOLE DEpTH

L2

GROOVE TOOL WIDTH

WpROJECTION

P

SHANK DIA.D2

OVERALLLENGTH

L1

TOOLNuMBER

MIN.HOLE DIA.

D1

.040

.045

.055

.070

.075

.085

1/41/4

5/16 5/16

3/83/8

it-180500it-200600it-230600it-290750it-320750it-360750

2-1/2

.500

.600

.600

.750

.750

.750

DEpTHL2

pROJECTIONP

SHANK DIAM-ETERD2

OVERALLLENGTH

L1

TOOLNuMBER

MINIMuM HOLE DIAMETER

D1

.180

.200

.230

.290

.320

.360

SET No. RR-2 $276.00

SET No. IT-1 $231.75

TOOLNuMBER

SET CONVENIENCE

2-1/2

2-1/23/8 .100.375

Boring Tool SetsFurnished in fitted wood case. Miniature Boring Tool Set, see Page 23.

47

BB-230400 BB-230600 BB-230800

BB-2301000BB-290500

BB-2901000

0.4000.6000.8001.0000.5001.000

5/16 2-1/2

.230

.230

.230

.230

.290

.290

SHANKDIAMETER

D2

OVERALLLENGTH

L1TOOL NuMBER

MIN. BORE DIAMETER

D1

MAX. BORE DEpTH

L2

pROJECTIONP

.058

.058

.058

.058

.073

.073

BB-320500 BB-3201000 BB-3201500

BB-360750 BB-3601250 BB-3601800

0.5001.0001.5000.7501.2501.800

3/8 2-1/2

.320

.320

.320

.360

.360

.360

SHANKDIAMETER

D2

OVERALLLENGTH

L1TOOL NuMBER

MIN. BORE DIAMETER

D1

MAX. BOREDEpTH

L2

pROJECTIONP

.080

.080

.080

.090

.090

.090

BB-050300 BB-060300 BB-080300 BB-100400 BB-100600 BB-110500

0.3000.3000.3000.4000.6000.500

1/8 1-1/2

.050

.060

.080

.100

.100

.110

SHANKDIAMETER

D2

OVERALLLENGTH

L1TOOL NuMBER

MIN. BORE DIAMETER

D1

MAX. BOREDEpTH

L2

pROJECTIONP

.013

.015

.020

.025

.025

.028

BB-180500 BB-180750

BB-1801000BB-200400 BB-200600

BB-2001000

0.5000.7501.0000.4000.6001.000

1/4 2-1/2

.180

.180

.180

.200

.200

.200

SHANKDIAMETER

D2

OVERALLLENGTH

L1TOOL NuMBER

MIN. BORE DIAMETER

D1

MAX. BORE DEpTH

L2

pROJECTIONP

.045

.045

.045

.050

.050

.050

BB-120500 BB-120700 BB-140400 BB-140700 BB-160400 BB-160750

0.5000.7000.4000.7000.4000.750

3/16 2

.120

.120

.140

.140

.160

.160

SHANKDIAMETER

D2

OVERALLLENGTH

L1TOOL NuMBER

MIN. BORE DIAMETER

D1

MAX. BORE DEpTH

L2

pROJECTIONP

.030

.030

.035

.035

.040

.040

SET No. BB-1 $126.30

SET No. BB-2 $134.35

SET No. BB-3 $145.00

SET No. BB-4 $195.65

SET No. BB-5 $266.85

SET CONVENIENCE

Back Chamfering ToolsFor Lathes

Brazed Back Chamfering ToolsFor Milling Machines

Shank Diameter –.0001 to –.0002”Cutter Diameter +.000 –.005”Neck Diameter +.000 –.005”Flat +.000 –.005”Depth +.050 –.000”Overall Length ±1/64”

Shank Diameter –.0001 to –.0002”Cutter Diameter +.000 –.005”Flat +.000 –.005”Overall Length ±1/32”

BACK CHAMFERING TOOLS

Solid carbide cutter headbrazed to solid carbide shank.

48

LBC-125-8 LBC-125-12 LBC-187-12 LBC-187-16 LBC-250-12 LBC-250-20

LBC-312-12 LBC-312-20 LBC-375-12 LBC-375-20 LBC-500-16 LBC-500-24

23.6523.6527.7527.7533.3033.30

41.5041.5054.1054.1094.2094.20

TOOLNuMBER

CuTTERDIAMETER

D1

.115

.115

.177

.177

.240

.240

.300

.300

.360

.360

.490

.490

pRICE EACH

OVERALLLENGTH

L1

1-1/21-1/2

22

2-1/22-1/2

2-1/22-1/22-1/22-1/2

33

DEpTHL2

1/23/43/41

3/41-1/4

3/41-1/43/4

1-1/41

1-1/2

fLATF

1/32

NECK DIAMETER

N.075.075.125.125.170.170

.210

.210

.250

.250

.350

.350

SHANK DIAMETER

D2

1/81/8

3/16 3/16

1/41/4

5/16 5/16

3/83/81/21/2

MBC-375MBC-500MBC-750MBC-001

61.8575.3593.50

122.05

3/81/23/41

1/4 5/163/81/2

1/324567

2-1/22-1/22-1/2

3

TOOLNuMBER

CuTTERDIAMETER

D1 pRICE EACH

SHANKLENGTH

LTHICKNESS

tfLAT

FNuMBER

Of fLuTES

SHANK DIAMETER

D2

1/81/8

5/32 3/16

MTR-375MTR-500MTR-750MTR-001

61.8575.3593.50

122.05

3/81/23/41

1/4 5/163/81/2

.075

.100

.125

.125

4567

2-1/22-1/22-1/2

3

TOOLNUMBER

CUTTERDIAMETER

D1 PRICE EACH

SHANkLENGTH

LTHICkNESS

TFLAT

FNUMBER

OF FLUTES

SHANk DIAMETER

D2

9/64 7/32

1/41/4

.010±.003

.010±.003

.015±.003

.015±.003

RADIUSr

Thread Relief ToolsFor Lathes

Brazed Thread Relief ToolsFor Milling Machines

Shank Diameter –.0001 to –.0002”Cutter Diameter +.000 –.005”Depth +.050 –.000”Overall Length ±1/64”

THREAD RELIEF TOOLS


49

Solid carbide cutter headbrazed to solid carbide shank.

LTR-125-6 LTR-187-6

LTR-187-12LTR-250-8

LTR-250-16

LTR-312-12 LTR-312-20 LTR-375-12 LTR-375-20 LTR-500-16 LTR-500-24

21.7525.0025.0029.9529.95

37.4037.4049.2549.2569.8069.80

.125 .1875 .1875

.250

.250

.3125 .3125

.375

.375

.500

.500

1/8 3/16 3/161/41/4

5/16 5/163/83/81/21/2

.040

.040

.040

.050

.050

.075

.075

.100

.100

.125

.125

3/83/83/41/21

3/41-1/43/4

1-1/41

1-1/2

1/16 5/64 5/64 3/32 3/32

3/32 3/321/81/8

5/32 5/32

1-1/222

2-1/22-1/2

2-1/22-1/22-1/22-1/2

33

TOOLNUMBER

CUTTERDIAMETER

D1 PRICE EACH

OVERALLLENGTH

L1

DEPTHL2

FLATF

PROjECTIONp

SHANk DIAMETER

D2

Shank Diameter –.0001 to –.0002”Cutter Diameter +.000 –.005”Flat +.000 –.005”Overall Length ±1/32”

RADIUSr

.002–.004

.003–.007

.003–.007

.003–.007

.003–.007

.003–.007

.003–.007

.003–.007

.003–.007

.008–.012

.008–.012

Shank Diameter –.0001 to –.0002”Cutter Diameter ±.0005”T.I.R. Maximum .0005”

SME Series, Miniature, Stub LengthCenter Cutting — 30° Helix

50

.007

.009

.010

.012

.013

.015

.016

.018

.019

.021

.022

.024

.025

.027

.028

.030

.031

.033

.034

.036

.037

.039

.040

.042

.043

.045

.047

.048

.050

.051

.053

.060

.068

.075

36.6536.6531.0531.0528.20

28.2025.5025.5021.7021.70

17.25

15.90

15.9013.9513.9513.9513.95

13.95

SME-005-2SME-006-2SME-007-2SME-008-2SME-009-2






SME-035-2SME-040-2SME-045-2SME-050-2

.005

.006

.007

.008

.009

.010

.011

.012

.013

.014

.015

.016

.017

.018

.019

.020

.021

.022

.023

.024

.025

.026

.027

.028

.029

.030

.031

.032

.033

.034

.035

.040

.045

.050

2-FLUTETOOL NO.

FLUTELENGTH

L2 PRICE EACH

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

OVERALLLENGTH

L1

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

END MILLS

13.95

1/8 1-1/2

1/8 1-1/2

Coated SME Series, Miniature, Stub LengthCenter Cutting — 30° Helix

51

END MILLS


.007

.009

.010

.012

.013

.015

.016

.018

.019

.021

.022

.024

.025

.027

.028

.030

.031

.033

.034

.036

.037

.039

.040

.042

.043

.045

.047

.048

.050

.051

.053

.060

.068

.075

40.1540.1534.4534.4531.55

31.5528.8028.8024.9524.95

20.45

19.00

19.0017.0517.0517.0517.05

17.05

SME-005-2xSME-006-2xSME-007-2xSME-008-2xSME-009-2x






SME-035-2xSME-040-2xSME-045-2xSME-050-2x

.005

.006

.007

.008

.009

.010

.011

.012

.013

.014

.015

.016

.017

.018

.019

.020

.021

.022

.023

.024

.025

.026

.027

.028

.029

.030

.031

.032

.033

.034

.035

.040

.045

.050

2-FLUTETOOL NO.

FLUTELENGTH

L2

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

OVERALLLENGTH

L1

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

AlTiNCOATED

PRICE EACH

1/8 1-1/2

1/8 1-1/2

17.05

RME Series, MiniatureCenter Cutting — 30° Helix

52

.010

.011

.012

.013

.014

.015

.016

.017

.018

.019

.020

.021

.022

.023

.024

.025

.026

.027

.028

.029

.030

.031

.032

.033

.034

.035

.040

.045

.050

RME-010-2RME-011-2RME-012-2RME-013-2RME-014-2





RME-035-2RME-040-2RME-045-2RME-050-2

.030

.033

.036

.039

.042

.045

.048

.051

.054

.057

.060

.063

.066

.069

.072

.075

.078

.081

.084

.087

.090

.093

.096

.099

.102

.105

.120

.135

.150

FLUTELENGTH

L2 PRICE EACH

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

OVERALLLENGTH

L1

END MILLS

2-FLUTETOOL NO.


1/8 1-1/2

29.5026.7026.7022.7022.70

18.00

16.60

16.6014.0514.0514.0514.05

14.05

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2 14.05

Coated RME Series, MiniatureCenter Cutting — 30° Helix

53

END MILLS


.010

.011

.012

.013

.014

.015

.016

.017

.018

.019

.020

.021

.022

.023

.024

.025

.026

.027

.028

.029

.030

.031

.032

.033

.034

.035

.040

.045

.050

RME-010-2xRME-011-2xRME-012-2xRME-013-2xRME-014-2x





RME-035-2xRME-040-2xRME-045-2xRME-050-2x

.030

.033

.036

.039

.042

.045

.048

.051

.054

.057

.060

.063

.066

.069

.072

.075

.078

.081

.084

.087

.090

.093

.096

.099

.102

.105

.120

.135

.150

FLUTELENGTH

L2

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

OVERALLLENGTH

L1

2-FLUTETOOL NO.

1/8 1-1/2

32.9529.9529.9525.9525.95

21.10

19.70

19.7017.1517.1517.1517.15

17.15

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

AlTiNCOATED

PRICE EACH

1/8 1-1/2

1/8 1-1/2 17.15

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/32 – 1/4” +.000 –.002” 17/64 – 1/2” +.000 –.003”T.I.R. Maximum .0005”

SEM Series, Stub LengthCenter Cutting — 30° Helix

END MILLS

1/32 3/64 1/16

5/64 3/32 7/641/8

9/64 5/3211/64 3/16

13/64 7/3215/64

1/4

17/64 9/3219/64 5/16

21/6411/3223/64

3/8

25/6413/3227/64 7/16

29/6415/3231/64

1/2

2-FLUTETOOL NO.

3-FLUTETOOL NO.

SEM-031-02SEM-046-02SEM-062-02

SEM-078-02SEM-093-02SEM-109-02SEM-125-02

SEM-140-02SEM-156-02SEM-171-02SEM-187-02

SEM-203-02SEM-218-02SEM-234-02SEM-250-02

SEM-265-02SEM-281-02SEM-296-02SEM-312-02

SEM-328-02SEM-343-02SEM-359-02SEM-375-02

SEM-390-02SEM-406-02SEM-421-02SEM-437-02

SEM-453-02—

SEM-484-02SEM-500-02

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1 PRICE EACH

SEM-031-04SEM-046-04SEM-062-04

SEM-078-04SEM-093-04SEM-109-04SEM-125-04

SEM-140-04SEM-156-04SEM-171-04SEM-187-04

SEM-203-04SEM-218-04SEM-234-04SEM-250-04

SEM-265-04SEM-281-04SEM-296-04SEM-312-04

SEM-328-04SEM-343-04SEM-359-04SEM-375-04

SEM-390-04SEM-406-04SEM-421-04SEM-437-04

SEM-453-04SEM-468-04SEM-484-04SEM-500-04

SEM-031-03SEM-046-03SEM-062-03

SEM-078-03SEM-093-03SEM-109-03SEM-125-03

SEM-140-03SEM-156-03SEM-171-03SEM-187-03

SEM-203-03SEM-218-03SEM-234-03SEM-250-03

SEM-265-03SEM-281-03SEM-296-03SEM-312-03

SEM-328-03SEM-343-03SEM-359-03SEM-375-03

—SEM-406-03SEM-421-03SEM-437-03

SEM-453-03SEM-468-03SEM-484-03SEM-500-03

54

1/8

3/16

1/4

5/16

3/8

7/16

1/2

1-1/2

2

2-1/2 5/8

1/16 3/321/8

5/32 3/16 3/161/4

1/4 5/16 5/163/8

3/8 7/16 7/161/2

1/2

1/21/21/25/8

1/8

1-1/2

1-1/2

2

2

2-1/2 5/8

12.0012.0010.90

10.9010.9010.909.65

15.45

19.20

21.30

25.45

38.10

41.90

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/32 – 1/4” +.000 –.002” 17/64 – 1/2” +.000 –.003”T.I.R. Maximum .0005”

Coated SEM Series, Stub LengthCenter Cutting — 30° Helix

END MILLS

55

1/32 3/64 1/16

5/64 3/32 7/641/8

9/64 5/3211/64 3/16

13/64 7/3215/64

1/4

17/64 9/3219/64 5/16

21/6411/3223/64

3/8

25/6413/3227/64 7/16

29/6415/3231/64

1/2

2-FLUTETOOL NO.

3-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

1/8

3/16

1/4

5/16

3/8

7/16

1/2

1-1/2

2

2-1/2 5/8

1/16 3/321/8

5/32 3/16 3/161/4

1/4 5/16 5/163/8

3/8 7/16 7/161/2

1/2

1/21/21/25/8

1/8

1-1/2

1-1/2

2

2

2-1/2 5/8

SEM-031-02xSEM-046-02xSEM-062-02x

SEM-078-02xSEM-093-02xSEM-109-02xSEM-125-02x






SEM-453-02x—

SEM-484-02xSEM-500-02x

SEM-031-03xSEM-046-03xSEM-062-03x






—SEM-406-03xSEM-421-03xSEM-437-03x


SEM-031-04xSEM-046-04xSEM-062-04x








AlTiNCOATED

PRICE EACH

15.0015.0013.90

13.9013.9013.9012.70

19.65

23.55

27.70

31.95

46.15

50.00

GEM Series Center Cutting — 30° Helix

END MILLS

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/32 – 1/4” +.000 –.002” 9/32 – 1” +.000 –.003”T.I.R. Maximum .0005”

56

2-FLUTETOOL NO.

3-FLUTETOOL NO.

GEM-031-4GEM-046-4GEM-062-4GEM-078-4GEM-093-4GEM-109-4GEM-125-4

GEM-140-4GEM-156-4GEM-171-4GEM-187-4

GEM-203-4GEM-218-4GEM-234-4GEM-250-4

GEM-281-4GEM-312-4GEM-375-4GEM-437-4

GEM-500-4GEM-562-4GEM-625-4GEM-687-4

GEM-750-4GEM-875-4GEM-001-4


GEM-140-2GEM-156-2GEM-171-2GEM-187-2

GEM-203-2GEM-218-2GEM-234-2GEM-250-2

GEM-281-2GEM-312-2GEM-375-2GEM-437-2

GEM-500-2GEM-562-2GEM-625-2GEM-687-2

GEM-750-2GEM-875-2GEM-001-2

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1 PRICE EACH


GEM-140-3GEM-156-3GEM-171-3GEM-187-3

GEM-203-3——

GEM-250-3

GEM-281-3GEM-312-3GEM-375-3GEM-437-3

GEM-500-3GEM-562-3GEM-625-3GEM-687-3

GEM-750-3GEM-875-3GEM-001-3

1/32 3/64 1/16 5/64 3/32 7/641/8

9/64 5/3211/64 3/16

13/64 7/3215/64

1/4

9/32 5/163/8

7/16

1/2 9/165/8

11/16

3/47/81

5/16 5/163/8

7/16

1/2 9/165/83/4

3/47/81

5/64 7/64 3/16 3/163/83/81/2

1/2 9/165/85/8

5/85/83/43/4

3/413/16

7/81

11-1/41-1/41-3/8

1-1/2

1/8

3/16

1/4

33-1/23-1/2

4

4

1-1/2

2

2-1/2

12.5512.5511.4511.4511.4511.4510.20

23.6523.6526.8042.30

46.5571.4582.20

101.25

125.30173.70189.90

20.25

16.20

2-1/2

Coated GEM Series Center Cutting — 30° Helix

END MILLS

57

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/32 – 1/4” +.000 –.002” 9/32 – 1” +.000 –.003”T.I.R. Maximum .0005”

2-FLUTETOOL NO.

3-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

1/32 3/64 1/16 5/64 3/32 7/641/8

9/64 5/3211/64 3/16

13/64 7/3215/64

1/4

9/32 5/163/8

7/16

1/2 9/165/8

11/16

3/47/81

5/16 5/163/8

7/16

1/2 9/165/83/4

3/47/81

5/64 7/64 3/16 3/163/83/81/2

1/2 9/165/85/8

5/85/83/43/4

3/413/16

7/81

11-1/41-1/41-3/8

1-1/2

1/8

3/16

1/4

33-1/23-1/2

4

4

1-1/2

2

2-1/2

15.5515.5514.4514.4514.4514.4513.20

30.0030.0033.2550.40

54.7583.2093.90

115.30

139.35193.95210.20

24.55

20.50

2-1/2

AlTiNCOATED

PRICE EACH

GEM-031-2xGEM-046-2xGEM-062-2xGEM-078-2xGEM-093-2xGEM-109-2xGEM-125-2x

GEM-140-2xGEM-156-2xGEM-171-2xGEM-187-2x




GEM-750-2xGEM-875-2xGEM-001-2x



GEM-203-3x——

GEM-250-3x










GEC-031-2-005GEC-062-2-005GEC-062-2-010GEC-093-2-005GEC-093-2-010GEC-125-2-010GEC-125-2-020GEC-187-2-010GEC-187-2-020GEC-187-2-030


GEC-500-2-010GEC-500-2-020GEC-500-2-030GEC-500-2-060GEC-625-2-020GEC-625-2-030GEC-625-2-060GEC-625-2-090


1/32 1/16 1/16 3/32 3/32

1/81/8

3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

PRICE EACH

OVERALLLENGTH

L1

CORNERRADIUS

r

CUTTERDIA.D1

3-FLUTETOOL NO.

SHANkDIA.D2

14.5013.1013.1013.1013.1013.1013.1018.6018.6018.60

23.3023.3023.3027.1527.1527.1530.8530.8530.8530.85

53.4053.4053.4053.4094.5094.5094.5094.50

144.20144.20144.20144.20144.20218.35218.35218.35218.35218.35

GEC Series, Corner Radius30° Helix

END MILLS

58

FLUTELENGTH

L22-FLUTE

TOOL NO.4-FLUTE

TOOL NO.GEC-031-4-005GEC-062-4-005GEC-062-4-010GEC-093-4-005GEC-093-4-010GEC-125-4-010GEC-125-4-020GEC-187-4-010GEC-187-4-020GEC-187-4-030








.005

.005

.010

.005

.010

.010

.020

.010

.020

.030

.010

.020

.030

.010

.020

.030

.010

.020

.030

.060

.010

.020

.030

.060

.020

.030

.060

.090

.020

.030

.060

.090

.125

.020

.030

.060

.090

.125

5/64 3/16 3/16

3/83/81/21/25/85/85/8

3/43/43/4

13/1613/1613/16

7/87/87/87/8

1111

1-1/41-1/41-1/41-1/4

1/81/81/81/81/81/81/8

3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

1-1/21-1/21-1/21-1/21-1/21-1/21-1/2

222

2-1/2

3333

3-1/23-1/23-1/23-1/2

4 1-1/2

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/32 – 1/4” +.000 –.002” 9/32 – 1” +.000 –.003”T.I.R. Maximum .0005”Corner Radius ±.0005”

GEC-031-2-005xGEC-062-2-005xGEC-062-2-010xGEC-093-2-005xGEC-093-2-010xGEC-125-2-010xGEC-125-2-020xGEC-187-2-010xGEC-187-2-020xGEC-187-2-030x


GEC-500-2-010xGEC-500-2-020xGEC-500-2-030xGEC-500-2-060xGEC-625-2-020xGEC-625-2-030xGEC-625-2-060xGEC-625-2-090x


1/32 1/16 1/16 3/32 3/32

1/81/8

3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

OVERALLLENGTH

L1

CORNERRADIUS

r

CUTTERDIA.D1

3-FLUTETOOL NO.

SHANkDIA.D2

17.5016.2016.2016.2016.2016.2016.2022.8522.85228.5

27.7027.7027.7033.7033.7033.7037.4037.4037.4037.40

61.7561.7561.7561.75

106.25106.25106.25106.25

158.20158.20158.20158.20158.20238.65238.65238.65238.65238.65

Coated GEC Series, Corner Radius30° Helix

END MILLS

59

FLUTELENGTH

L22-FLUTE

TOOL NO.4-FLUTE

TOOL NO.GEC-031-4-005xGEC-062-4-005xGEC-062-4-010xGEC-093-4-005xGEC-093-4-010xGEC-125-4-010xGEC-125-4-020xGEC-187-4-010xGEC-187-4-020xGEC-187-4-030x








.005

.005

.010

.005

.010

.010

.020

.010

.020

.030

.010

.020

.030

.010

.020

.030

.010

.020

.030

.060

.010

.020

.030

.060

.020

.030

.060

.090

.020

.030

.060

.090

.125

.020

.030

.060

.090

.125

5/64 3/16 3/16

3/83/81/21/25/85/85/8

3/43/43/4

13/1613/1613/16

7/87/87/87/8

1111

1-1/41-1/41-1/41-1/4

1/81/81/81/81/81/81/8

3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

1-1/21-1/21-1/21-1/21-1/21-1/21-1/2

222

2-1/2

3333

3-1/23-1/23-1/23-1/2

4 1-1/2

AlTiNCOATED

PRICE EACH

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/32 – 1/4” +.000 –.002” 9/32 – 1” +.000 –.003”T.I.R. Maximum .0005”Corner Radius ±.0005”

EMS SeriesCenter Cutting — 30° Helix

END MILLS

60

Shank Diameter –.0001 to –.0002”Cutter Diameter +.001 –.000”T.I.R. Maximum .0005”

These end mills feature a plus tolerance on the cutting diameter. Tools are suitable for multiple resharpening.

Sizes 3/8” and larger feature a Weldon flat.

*6 Flute

5/64 3/163/81/2

9/165/85/83/4

3/413/16

7/81

11-1/41-1/41-3/8

1-1/22-1/2

3/16 3/161/41/4

5/16 5/163/8

7/16

1/2 9/165/8

11/16

3/41

2-FLUTETOOL NO.

3-FLUTETOOL NO.

22

2-1/22-1/2

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1 PRICE EACH 1/32 1/16 3/321/8

5/32 3/16 7/321/4

9/32 5/163/8

7/16

1/2 9/165/8

11/16

3/41

EMS-031-4 EMS-062-4 EMS-093-4 EMS-125-4

EMS-156-4 EMS-187-4 EMS-218-4 EMS-250-4

EMS-281-4 EMS-312-4 EMS-375-4 EMS-437-4

EMS-500-4 EMS-562-4 EMS-625-4 EMS-687-4

EMS-750-4 EMS-001-6*

EMS-031-3EMS-062-3EMS-093-3EMS-125-3

EMS-156-3EMS-187-3EMS-218-3EMS-250-3

EMS-281-3EMS-312-3EMS-375-3EMS-437-3

EMS-500-3EMS-562-3EMS-625-3EMS-687-3

EMS-750-3EMS-001-3

EMS-031-2EMS-062-2EMS-093-2EMS-125-2

EMS-156-2EMS-187-2EMS-218-2EMS-250-2

EMS-281-2EMS-312-2EMS-375-2EMS-437-2

EMS-500-2EMS-562-2EMS-625-2EMS-687-2

EMS-750-2EMS-001-2

1/8 1-1/2

33-1/23-1/2

4

45

2-1/2

15.1013.7013.7012.25

19.4019.4024.3524.35

28.3028.3032.1550.75

55.7582.1598.65

121.45

150.40227.80

Coated EMS SeriesCenter Cutting — 30° Helix

END MILLS

61

*6 Flute

5/64 3/163/81/2

9/165/85/83/4

3/413/16

7/81

11-1/41-1/41-3/8

1-1/22-1/2

18.0016.7516.7515.30

23.7523.7528.7528.75

34.8534.8538.7559.00

64.1593.85

110.40135.50

164.45248.15

2-FLUTETOOL NO.

3-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

AlTiNCOATED

PRICE EACH 1/32 1/16 3/321/8

5/32 3/16 7/321/4

9/32 5/163/8

7/16

1/2 9/165/8

11/16

3/41

EMS-031-4x EMS-062-4x EMS-093-4x EMS-125-4x




EMS-750-4x EMS-001-6x*

EMS-031-3xEMS-062-3xEMS-093-3xEMS-125-3x




EMS-750-3xEMS-001-3x





EMS-750-2xEMS-001-2x

3/16 3/161/41/4

5/16 5/163/8

7/16

1/2 9/165/8

11/16

3/41

22

2-1/22-1/2

1/8 1-1/2

33-1/23-1/2

4

45

2-1/2

Shank Diameter –.0001 to –.0002Cutter Diameter +.001 –.000”T.I.R. Maximum .0005”

These end mills feature a plus tolerance on the cutting diameter. Tools are suitable for multiple resharpening.


TSM Series, Stub Length, TaperedCenter Cutting — 30° Helix

62

Shank Diameter –.0001 to –.0002”Small Diameter +.003 –.000”T.I.R. Maximum .0005”

TSM-250-0TSM-250-1TSM-250-3TSM-250-5TSM-250-7

TSM-375-0TSM-375-1TSM-375-3TSM-375-5TSM-375-7

TSM-500-3TSM-500-5TSM-500-7

1/4

3/8

1/2

1° 1° 30’

3° 5° 7°

1° 1° 30’

3° 5° 7°

3° 5° 7°

1/8

3/16 3/16 5/321/8

5/32

1/41/4

3/16

2-1/2

2-1/2

3

1/2

3/4

1

36.3536.3536.3536.3536.35

55.3555.3555.3555.3555.35

84.0584.0584.05

PRICE EACH

FLUTELENGTH

L2

OVERALLLENGTH

L1

ANGLE PER SIDE

SMALLDIAMETER

D1

SHANkDIAMETER

D2

3-FLUTETOOL NO.

END MILLS

TEM Series, TaperedCenter Cutting — 30° Helix

63

PRICE EACH

TEM-250-0TEM-250-1TEM-250-3TEM-250-5TEM-250-7

TEM-375-0TEM-375-1TEM-375-3TEM-375-5TEM-375-7

TEM-500-3TEM-500-5TEM-500-7

1/4

3/8

1/2

1° 1° 30’

3° 5° 7°

1° 1° 30’

3° 5° 7°

3° 5° 7°

1/8

3/16 3/16 5/321/8

5/32

1/41/4

3/16

FLUTELENGTH

L2

OVERALLLENGTH

L1

3

3-1/2

4

11-1/2

13/41/2

1-3/41-3/41-3/41-1/23/4

21-1/41-1/4

ANGLE PER SIDE

SMALLDIAMETER

D1

SHANkDIAMETER

D2

44.75

68.40

103.80

3-FLUTETOOL NO.

END MILLS


Shank Diameter –.0001 to –.0002”Cutter Diameter 1/16 – 1/4” +.000–.002” 9/32 – 1/2” +.000–.003”T.I.R. Maximum .0005”

SED Series, Stub Length, Double EndCenter Cutting — 30° Helix

END MILLS

64

SED-062-2SED-093-2SED-125-2SED-156-2

SED-187-2SED-218-2SED-250-2SED-281-2

SED-312-2SED-375-2SED-437-2SED-500-2

1/81/81/8

3/16

3/161/41/4

5/16

5/163/8

7/161/2

1/8 3/16

1/4 5/16

3/81/21/21/2

1/2 9/16 9/165/8

15.8515.8515.8520.65

20.6526.1526.1538.60

38.6041.6557.3569.80

SED-062-4SED-093-4SED-125-4SED-156-4

SED-187-4SED-218-4SED-250-4SED-281-4

SED-312-4SED-375-4SED-437-4SED-500-4

1/16 3/321/8

5/32

3/16 7/321/4

9/32

5/163/8

7/161/2

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANkDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1 PRICE EACH

22-1/22-1/22-1/2

2-1/22-1/22-1/2

3

2

EMD Series, Double EndCenter Cutting — 30° Helix

END MILLS


65

EMD-125-2EMD-156-2EMD-187-2EMD-218-2

EMD-250-2EMD-281-2EMD-312-2EMD-343-2EMD-375-2

EMD-437-2EMD-500-2

EMD-125-4EMD-156-4EMD-187-4EMD-218-4

EMD-250-4EMD-281-4EMD-312-4EMD-343-4EMD-375-4

EMD-437-4EMD-500-4

1/8 5/32 3/16 7/32

1/4 9/32 5/1611/32

3/8

7/161/2

3/83/83/83/8

3/83/83/83/83/8

1/21/2

3/8 7/161/2

9/16

5/811/16

3/43/43/4

7/81

3-1/163-1/83-1/43-3/8

3-3/83-1/23-1/23-1/23-1/2

44

35.8539.1540.3046.10

47.7555.8557.8061.6561.65

99.55100.00

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1 PRICE EACH

EMH-250-06EMH-281-06EMH-312-06

EMH-375-06EMH-437-06EMH-500-06

EMH-625-06EMH-750-06EMH-000-06EMH-001-06

1/4 9/32 5/16

3/8 7/16

1/2

5/83/411

1/4 5/16 5/16

3/8 7/16

1/2

5/83/411

3/43/4

13/16

7/811

1-1/41-1/21-1/22-1/2

2-1/2

2-1/22-1/2

3

3-1/2445

24.3528.3028.30

32.1550.7555.75

98.65150.40227.80283.90

END MILLS

EMH SeriesCenter Cutting — 38° Helix

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/4” +.000–.002” 9/32 – 1” +.000–.003”T.I.R. Maximum .0005”

These 38° high helix end mills provide a superior work piece finish in all milling applications.

These tools are very suitable for milling steels, stainless steels, and heat treated materials.

The 6-flute geometry provides excellent shearing action, resulting in the highest dimensional accu-racy and reduced work piece distortion, especially in thin wall slotting applications.


66

6-FLUTETOOL NO.

FLUTELENGTH

L2 PRICE EACH

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

OVERALLLENGTH

L1

EMH-250-06xEMH-281-06xEMH-312-06x

EMH-375-06xEMH-437-06xEMH-500-06x

EMH-625-06xEMH-750-06xEMH-000-06xEMH-001-06x

1/4 9/32 5/16

3/8 7/16

1/2

5/83/411

1/4 5/16 5/16

3/8 7/16

1/2

5/83/411

3/43/4

13/16

7/811

1-1/41-1/21-1/22-1/2

2-1/2

2-1/22-1/2

3

3-1/2445

28.7534.8534.85

38.7559.0064.15

110.40164.45248.15304.15

END MILLS

Coated EMH SeriesCenter Cutting — 38° Helix

67

6-FLUTETOOL NO.

FLUTELENGTH

L2

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

OVERALLLENGTH

L1

AlTiNCOATED

PRICE EACH


These 38° high helix end mills provide a superior work piece finish in all milling applications.

These tools are very suitable for milling steels, stainless steels, and heat treated materials.

The 6-flute geometry provides excellent shearing action, resulting in the highest dimensional accu-racy and reduced work piece distortion, especially in thin wall slotting applications.


ASM-062-2ASM-093-2ASM-125-2ASM-156-2

ASM-187-2ASM-218-2ASM-250-2

ASM-312-2ASM-375-2ASM-437-2ASM-500-2

1/81/81/8

3/16

3/161/41/4

5/163/8

7/161/2

1/16 3/321/8

5/32

3/16 7/321/4

5/163/8

7/161/2

1/8 3/161/4

5/16

3/8 7/161/2

1/25/85/85/8

1-1/222

22

2-1/22-1/2

12.0512.0510.70 17.10

17.1021.3021.30

23.4528.1042.1546.30


“Stealth” cutter-profile. These high performance stub end mills feature a 45° helix and are engi-neered for high speed cutting in aluminum, non-ferrous and soft materials.

The special flute geometry and short flute length provide an extremely smooth and silent cutting action for an exceptional surface finish.

ASM-2 Series, Stub LengthCenter Cutting — 45° Helix

END MILLS

68

2-FLUTETOOL NO.

FLUTELENGTH

L2 PRICE EACH

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

OVERALLLENGTH

L1

1-1/2

Coated ASM-2 Series, Stub LengthCenter Cutting — 45° Helix

END MILLS

69

1/81/81/8

3/16

3/161/41/4

5/163/8

7/161/2

1/16 3/321/8

5/32

3/16 7/321/4

5/163/8

7/161/2

1/8 3/161/4

5/16

3/8 7/161/2

1/25/85/85/8

15.0515.0513.7521.35

21.3525.6025.60

29.9034.7050.2554.45

2-FLUTETOOL NO.

FLUTELENGTH

L2

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

OVERALLLENGTH

L1

ASM-062-2SASM-093-2SASM-125-2SASM-156-2S

ASM-187-2SASM-218-2SASM-250-2S

ASM-312-2SASM-375-2SASM-437-2SASM-500-2S

1-1/222

22

2-1/22-1/2

1-1/2

ALU-SCOATED

PRICE EACH


“Stealth” cutter-profile. These high performance stub end mills feature a 45° helix and are engi-neered for high speed cutting in aluminum, non-ferrous and soft materials.

The special flute geometry and short flute length provide an extremely smooth and silent cutting action for an exceptional surface finish.

COATINGDEVELOPED

SPECIFICALLYFOR USE IN ALUMINUM

ASM-5 Series, Stub LengthCenter Cutting — 45° Helix

Shank Diameter –.0001 to –.0002”Cutter Diameter 3/16 – 1/4” +.000–.002” 5/16 – 1” +.000–.003”T.I.R. Maximum .0005”

These 5-flute high tech end mills feature a 45° helix for finishing, roughing, and slotting, in me-dium to hard steels, stainless steels, and high temperature alloys.

The special flute geometry and high helix angle reduce chattering, increase metal removal rates, and provide the highest surface finish quality.

70

1-1/2222

2-1/2

ASM-187-5ASM-250-5ASM-312-5ASM-375-5ASM-500-5

3/161/4

5/163/81/2

3/81/21/25/85/8

17.5020.6524.2030.1547.45

3/161/4

5/163/81/2

FLUTE LENGTHL2 PRICE EACH

OVERALL LENGTHL1

CUTTER DIAMETERD1

5-FLUTETOOL NO.

SHANK DIAMETERD2

END MILLS

71

Coated ASM-5 Series, Stub LengthCenter Cutting — 45° Helix




1-1/2222

2-1/2

ASM-187-5xASM-250-5xASM-312-5xASM-375-5xASM-500-5x

3/161/4

5/163/81/2

3/81/21/25/85/8

21.7525.0030.6036.7055.65

3/161/4

5/163/81/2

FLUTE LENGTHL2

OVERALL LENGTHL1

CUTTER DIAMETERD1

5-FLUTETOOL NO.

SHANK DIAMETERD2

END MILLS

AlTiN COATED PRICE EACH

71


“Stealth” cutter-profile. These high performance end mills feature a 45° helix and are engineered for high speed cutting in aluminum, nonferrous and soft materials.

The special flute geometry provides an extremely smooth and silent cutting action for an exceptional surface finish.

ARM-2 & ARM-3 SeriesCenter Cutting — 45° Helix

72

ARM-062-2ARM-093-2ARM-125-2

ARM-156-2ARM-187-2ARM-218-2ARM-250-2

ARM-281-2ARM-312-2ARM-375-2

—

ARM-500-2ARM-562-2ARM-625-2ARM-687-2

ARM-750-2ARM-001-2

1/16 3/321/8

5/32 3/16 7/321/4

9/32 5/163/8

7/16

1/2 9/165/8

11/16

3/41

1/8

3/16 3/161/41/4

5/16 5/163/8

7/16

1/2 9/165/83/4

3/41

3/163/81/2

9/165/85/83/4

3/413/16

7/81

11-1/41-1/41-3/8

1-1/21-1/2

1-1/212.6012.6011.25

17.8517.8522.4022.40

26.1026.1029.5546.75

51.4079.1090.90

111.95

138.55209.95

2-FLUTETOOL NO.

FLUTELENGTH

L2 PRICE EACH

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

OVERALLLENGTH

L1

3-FLUTETOOL NO.

———

———

ARM-250-3

ARM-281-3ARM-312-3ARM-375-3ARM-437-3

ARM-500-3ARM-562-3ARM-625-3ARM-687-3

ARM-750-3ARM-001-3

END MILLS

22

2-1/22-1/2

2-1/22-1/22-1/22-1/2

33-1/23-1/2

4

44

Coated ARM-2 & ARM-3 SeriesCenter Cutting — 45° Helix

73

ARM-062-2SARM-093-2SARM-125-2S

ARM-156-2SARM-187-2SARM-218-2SARM-250-2S

ARM-281-2SARM-312-2SARM-375-2S

—


ARM-750-2SARM-001-2S

1/16 3/321/8

5/32 3/16 7/321/4

9/32 5/163/8

7/16

1/2 9/165/8

11/16

3/41

1/81/81/8

3/16 3/161/41/4

5/16 5/163/8

7/16

1/2 9/165/83/4

3/41

3/163/81/2

9/165/85/83/4

3/413/16

7/81

11-1/41-1/41-3/8

1-1/21-1/2

2-FLUTETOOL NO.

FLUTELENGTH

L2

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

OVERALLLENGTH

L1

3-FLUTETOOL NO.

———

———

ARM-250-3S



ARM-750-3SARM-001-3S

END MILLS

1-1/2

22

2-1/22-1/2

2-1/22-1/22-1/22-1/2

33-1/23-1/2

4

44


“Stealth” cutter-profile. These high performance end mills feature a 45° helix and are engineered for high speed cutting in aluminum, nonferrous and soft materials.


15.6015.6014.30

22.1022.1026.7526.75

32.6032.6036.1555.00

59.7090.80

102.60126.00

152.65230.25

ALU-SCOATED

PRICE EACH

COATINGDEVELOPED


ARM-5 SeriesCenter Cutting — 45° Helix

22-1/22-1/22-1/2

33-1/2

44

ARM-187-5ARM-250-5ARM-312-5ARM-375-5

ARM-500-5ARM-625-5ARM-750-5ARM-001-5

3/161/4

5/163/8

1/25/83/41

5/83/4

13/167/8

11-1/41-1/21-1/2

19.4524.3528.3032.15

53.6098.65

150.40227.80

3/161/4

5/163/8

1/25/83/41


OVERALL LENGTHL1

CUTTER DIAMETERD1

5-FLUTETOOL NO.

SHANK DIAMETERD2

74





L2

END MILLS

Coated ARM-5 SeriesCenter Cutting — 45° Helix

75

END MILLS

22-1/22-1/22-1/2

33-1/2

44

3/161/4

5/163/8

1/25/83/41

5/83/4

13/167/8

11-1/41-1/21-1/2

23.7528.7534.8538.75

60.50110.40164.45248.15

3/161/4

5/163/8

1/25/83/41

FLUTE LENGTHL2

OVERALL LENGTHL1

CUTTER DIAMETERD1

5-FLUTETOOL NO.

SHANK DIAMETERD2

L2


ARM-187-5xARM-250-5xARM-312-5xARM-375-5x

ARM-500-5xARM-625-5xARM-750-5xARM-001-5x





ARC-062-2-005ARC-062-2-010ARC-093-2-005ARC-093-2-010ARC-125-2-010ARC-125-2-020ARC-187-2-010ARC-187-2-020ARC-187-2-030

ARC-250-2-010ARC-250-2-020ARC-250-2-030ARC-312-2-010ARC-312-2-020ARC-312-2-030ARC-375-2-010ARC-375-2-020ARC-375-2-030ARC-375-2-060

ARC-500-2-010ARC-500-2-020ARC-500-2-030ARC-500-2-060ARC-625-2-020ARC-625-2-030ARC-625-2-060ARC-625-2-090


1/16 1/16 3/32 3/32

1/81/8

3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

PRICE EACH

OVERALLLENGTH

L1

CORNERRADIUS

R

CUTTERDIAMETER

D13-FLUTE

TOOL NO.

SHANKDIAMETER

D2

ARC -2, -3 Series, Corner RadiusCenter Cutting — 45° Helix

END MILLS

76

FLUTELENGTH

L22-FLUTE

TOOL NO.




.005

.010

.005

.010

.010

.020

.010

.020

.030

.010

.020

.030

.010

.020

.030

.010

.020

.030

.060

.010

.020

.030

.060

.020

.030

.060

.090

.020

.030

.060

.090

.125

.020

.030

.060

.090

.125

3/16 3/16

3/83/81/21/25/85/85/8

3/43/43/4

13/1613/1613/16

7/87/87/87/8

1111

1-1/41-1/41-1/41-1/4

1/81/81/81/81/81/8

3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

1-1/21-1/21-1/21-1/21-1/21-1/2

222

2-1/2

3333

3-1/23-1/23-1/23-1/2

4 1-1/2

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/16 – 1/4” +.000–.002” 9/32 – 1” +.000–.003”T.I.R. Maximum .0005”Corner Radius ±.0005”

Essential features, same as ARM series, see Page 72.

14.5514.5514.5514.5514.5514.5520.5520.5520.55

25.7525.7525.7528.8028.8028.8032.5532.5532.5532.55

56.5556.5556.5556.5599.9599.9599.9599.95

145.50145.50145.50145.50145.50220.45220.45220.45220.45220.45

COATINGDEVELOPED


ARC-062-2-005SARC-062-2-010SARC-093-2-005SARC-093-2-010SARC-125-2-010SARC-125-2-020SARC-187-2-010SARC-187-2-020SARC-187-2-030S

ARC-250-2-010SARC-250-2-020SARC-250-2-030SARC-312-2-010SARC-312-2-020SARC-312-2-030SARC-375-2-010SARC-375-2-020SARC-375-2-030SARC-375-2-060S

ARC-500-2-010SARC-500-2-020SARC-500-2-030SARC-500-2-060SARC-625-2-020SARC-625-2-030SARC-625-2-060SARC-625-2-090S


1/16 1/16 3/32 3/32

1/81/8

3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

OVERALLLENGTH

L1

CORNERRADIUS

R

CUTTERDIAMETER

D1

3-FLUTETOOL NO.

SHANKDIAMETER

D2

Coated ARC -2, -3 Series, Corner RadiusCenter Cutting — 45° Helix

END MILLS

77

FLUTELENGTH

L2

2-FLUTETOOL NO.


ARC-500-3-010SARC-500-3-020SARC-500-3-030SARC-500-3-060SARC-625-3-020SARC-625-3-030SARC-625-3-060SARC-625-3-090S


.005

.010

.005

.010

.010

.020

.010

.020

.030

.010

.020

.030

.010

.020

.030

.010

.020

.030

.060

.010

.020

.030

.060

.020

.030

.060

.090

.020

.030

.060

.090

.125

.020

.030

.060

.090

.125

3/16 3/16

3/83/81/21/25/85/85/8

3/43/43/4

13/1613/1613/16

7/87/87/87/8

1111

1-1/41-1/41-1/41-1/4

1/81/81/81/81/81/8

3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

1-1/21-1/21-1/21-1/21-1/21-1/2

222

2-1/2

3333

3-1/23-1/23-1/23-1/2

4 1-1/2

ALU-S COATED

PRICE EACH


Essential features, same as ARM series, see Page 72.

17.5517.5517.5517.5517.5517.5524.9024.9024.90

30.1030.1030.1035.2535.2535.2539.2539.2539.2539.25

64.9564.9564.9564.95

111.65111.65111.65111.65

159.55159.55159.55159.55159.55240.80240.80240.80240.80240.80

COATINGDEVELOPED


ARC-187-5-010ARC-187-5-020ARC-187-5-030ARC-250-5-010ARC-250-5-020ARC-250-5-030

ARC-312-5-010ARC-312-5-020ARC-312-5-030ARC-375-5-010ARC-375-5-020ARC-375-5-030ARC-375-5-060



3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

PRICE EACH

OVERALLLENGTH

L1

CORNERRADIUS

R

CUTTERDIAMETER

D1

22.4022.4022.4028.0028.0028.00

31.2031.2031.2035.4535.4535.4535.45

61.4061.4061.4061.40

103.60103.60103.60103.60

157.95157.95157.95157.95157.95239.25239.25239.25239.25239.25

ARC-5 Series, Corner RadiusCenter Cutting — 45° Helix

END MILLS

78

FLUTELENGTH

L25-FLUTE

TOOL NO..010.020.030.010.020.030

.010

.020

.030

.010

.020

.030

.060

.010

.020

.030

.060

.020

.030

.060

.090

.020

.030

.060

.090

.125

.020

.030

.060

.090

.125

5/85/85/83/43/43/4

13/1613/1613/16

7/87/87/87/8

1111

1-1/41-1/41-1/41-1/4

3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

222

2-1/22-1/22-1/2

2-1/2

3333

3-1/23-1/23-1/23-1/2

4 1-1/2

SHANKDIAMETER

D2

L2


These 5-flute high tech end mills feature a 45° helix for finishing, roughing, and slotting in me-dium to hard steels, stainless steels, and high temperature alloys.

Higher metal removal rates as well as excellent fin-ishes are achieved with these 5-flute end mills.

45° helix diminishes chatter in corner milling ap-plications.


3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

OVERALLLENGTH

L1

CORNERRADIUS

R

CUTTERDIAMETER

D1

26.7526.7526.7532.5032.5032.50

37.7537.7537.7542.0542.0542.0542.05

69.8069.8069.8069.80

115.30115.30115.30115.30

171.95171.95171.95171.95171.95259.55259.55259.55259.55259.55

Coated ARC-5 Series, Corner RadiusCenter Cutting — 45° Helix

END MILLS

79

FLUTELENGTH

L25-FLUTE

TOOL NO..010.020.030.010.020.030

.010

.020

.030

.010

.020

.030

.060

.010

.020

.030

.060

.020

.030

.060

.090

.020

.030

.060

.090

.125

.020

.030

.060

.090

.125

5/85/85/83/43/43/4

13/1613/1613/16

7/87/87/87/8

1111

1-1/41-1/41-1/41-1/4

3/16 3/16 3/16

1/41/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/85/85/85/8

3/43/43/43/43/411111

222

2-1/22-1/22-1/2

2-1/2

3333

3-1/23-1/23-1/23-1/2

4 1-1/2

SHANKDIAMETER

D2

AlTiNCOATED

PRICE EACH

L2






ARC-187-5-010xARC-187-5-020xARC-187-5-030xARC-250-5-010xARC-250-5-020xARC-250-5-030x

ARC-312-5-010xARC-312-5-020xARC-312-5-030xARC-375-5-010xARC-375-5-020xARC-375-5-030xARC-375-5-060x

ARC-500-5-010xARC-500-5-020xARC-500-5-030xARC-500-5-060xARC-625-5-020xARC-625-5-030xARC-625-5-060xARC-625-5-090x

ARC-750-5-020xARC-750-5-030xARC-750-5-060xARC-750-5-090xARC-750-5-125xARC-001-5-020xARC-001-5-030xARC-001-5-060xARC-001-5-090xARC-001-5-125x

SDH Series60° Helix


These 60° high helix end mills generate the high-est metal removal rate in most applications.

The 3-flute geometry is ideal for roughing and slotting in all mild steels and stainless steels.

The 4-flute geometry is ideally suited for milling Inconel, Waspalloy, titanium, and high tempera-ture alloys.


END MILLS

SDH-250-03SDH-281-03SDH-312-03SDH-375-03

SDH-437-03SDH-500-03SDH-562-03

SDH-625-03SDH-750-03SDH-000-03SDH-001-03

———

SDH-375-04

SDH-437-04SDH-500-04SDH-562-04

SDH-625-04SDH-750-04SDH-000-04SDH-001-04

1/4 9/32 5/163/8

7/161/2

9/16

5/83/411

1/4 5/16 5/163/8

7/161/2

9/16

5/83/411

3/43/4

13/167/8

11

1-1/4

1-1/41-1/21-1/22-1/2

2-1/23

3-1/2

3-1/2445

22.3025.9525.9529.45

46.6051.2075.30

90.35137.90208.90267.20

80

3-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1 PRICE EACH

2-1/2

Coated SDH Series60° Helix

END MILLS

SDH-250-03xSDH-281-03xSDH-312-03xSDH-375-03x

SDH-437-03xSDH-500-03xSDH-562-03x


———

SDH-375-04x

SDH-437-04xSDH-500-04xSDH-562-04x


1/4 9/32 5/163/8

7/161/2

9/16

5/83/411

1/4 5/16 5/163/8

7/161/2

9/16

5/83/411

3/43/4

13/167/8

11

1-1/4

1-1/41-1/21-1/22-1/2

26.6532.5032.5036.05

54.8059.5087.00

102.10151.90229.20287.45

81

3-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

AlTiNCOATED

PRICE EACH

2-1/23

3-1/2

3-1/2445

2-1/2


These 60° high helix end mills generate the high-est metal removal rate in most applications.

The 3-flute geometry is ideal for roughing and slotting in all mild steels and stainless steels.

The 4-flute geometry is ideally suited for milling Inconel, Waspalloy, titanium, and high tempera-ture alloys.


GLL Series, Long LengthCenter Cutting — 30° Helix

END MILLS

82

GLL-187-2GLL-250-2GLL-312-2

GLL-375-2GLL-437-2GLL-500-2

GLL-625-2GLL-750-2GLL-001-2

GLL-187-4GLL-250-4GLL-312-4

GLL-375-4GLL-437-4GLL-500-4

GLL-625-4GLL-750-4GLL-001-4

3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/41-1/81-1/8

1-1/822

2-1/4

2-1/233

34-1/24-1/2

5

22.4527.0031.55

35.8556.6062.15

109.95167.60253.95

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1 PRICE EACH


Coated GLL Series, Long LengthCenter Cutting — 30° Helix

END MILLS

83

GLL-187-2xGLL-250-2xGLL-312-2x






3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/41-1/81-1/8

1-1/822

2-1/4

2-1/233

34-1/24-1/2

5

26.8031.5038.20

42.5568.8074.50

121.65181.65274.25

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1


AlTiNCOATED

PRICE EACH

84

GEL Series, Extra LongCenter Cutting — 30° Helix

GEL-187-2GEL-250-2GEL-312-2

GEL-375-2GEL-437-2GEL-500-2

GEL-625-2GEL-750-2GEL-001-2

GEL-187-4GEL-250-4GEL-312-4

GEL-375-4GEL-437-4GEL-500-4

GEL-625-4GEL-750-4GEL-001-4

3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

1-1/81-1/21-5/8

1-3/433

3

344

466

6

23.7528.5532.85

37.9059.6568.25

120.70183.95278.80

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1 PRICE EACH


END MILLS

85

Coated GEL Series, Extra LongCenter Cutting — 30° Helix

GEL-187-2xGEL-250-2xGEL-312-2x






3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

1-1/81-1/21-5/8

1-3/433

3

344

466

6

28.1034.8042.20

47.3071.9580.70

132.45197.95299.10

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

END MILLS

AlTiNCOATED

PRICE EACH


GLR Series, Long ReachCenter Cutting — 30° Helix

86

GLR-187-2GLR-250-2GLR-312-2

GLR-375-2GLR-437-2GLR-500-2

GLR-625-2——

GLR-187-4GLR-250-4GLR-312-4

GLR-375-4GLR-437-4GLR-500-4

GLR-625-4GLR-750-4GLR-001-4

3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

22-1/22-5/8

2-3/44-1/24-1/2

4-1/2

344

466

6

27.2032.8537.75

43.5565.7075.15

133.25202.30306.65

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1 PRICE EACH3/81/25/8

3/411

1-1/41-1/21-1/2


Neck diameter is reduced .020” on all sizes forrequired clearance in long reach applications.

END MILLS

REDUCED NECK LENGTH

L3

Coated GLR Series, Long ReachCenter Cutting — 30° Helix

87

GLR-187-2xGLR-250-2xGLR-312-2x


GLR-625-2x——




3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

22-1/22-5/8

2-3/44-1/24-1/2

4-1/2

344

466

6

31.6539.2047.25

53.1578.1087.70

144.95216.35327.00

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

3/81/25/8

3/411

1-1/41-1/21-1/2

END MILLS

AlTiNCOATED

PRICE EACH



REDUCED NECK LENGTH

L3

88

ALM Series, Long LengthCenter Cutting — 45° Helix



Ideal for continuous full depth milling.



Sizes 3/8” and larger feature a Weldon Flat.

3344666

ALM-250-5ALM-312-5ALM-375-5ALM-500-5ALM-625-5ALM-750-5ALM-001-5

1/4 5/16

3/81/25/83/41

1-1/41-1/41-1/2

2333

1/4 5/16

3/81/25/83/41


OVERALL LENGTHL1

CUTTER DIAMETERD1

5-FLUTETOOL NO.

SHANK DIAMETERD2

END MILLS

29.0533.8538.5066.85

118.10180.15286.55

Coated MEM SeriesCenter Cutting — 45° Helix

89


These 6-flute high performance end mills are spe-cifically developed for HSC milling of heat treated and tough to machine materials.

Ideal for dry machining applications.

Extensively used in the mold and die industries.

These end mills are only available with AlTiN coating.

MEM-187-6xMEM-250-6xMEM-312-6xMEM-375-6x

MEM-500-6xMEM-625-6xMEM-750-6xMEM-001-6x

3/161/4

5/163/8

1/25/83/41

3/161/4

5/163/8

1/25/83/41

5/83/4

13/167/8

11-1/41-1/21-1/2

22-1/22-1/22-1/2

33-1/2

44

23.7528.7534.8538.75

64.15110.40164.45248.15

6-FLUTETOOL NO. 25° CHAMFER

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

AlTiNCOATED

PRICE EACH

.003

.004

.007

.009

.011

.015

.017

.019

END MILLS

CRE Series, Corner RoundingDouble End

90

CRE-125-010CRE-125-015CRE-125-020CRE-125-025CRE-125-030CRE-125-031

CRE-187-035CRE-187-040CRE-187-045CRE-187-047CRE-187-050CRE-187-055CRE-187-060CRE-187-062


CRE-312-100CRE-312-109CRE-312-125CRE-375-140CRE-375-156


CRE-750-281CRE-750-296CRE-750-312CRE-001-375CRE-001-437

.0100

.0156

.0200

.0250

.0300

.0312

.0350

.0400

.0450

.0469

.0500

.0550

.0600

.0625

.0700

.0750

.0781

.0800

.0900

.0938

.1000

.1094

.1250

.1406

.1562

.1718

.1875

.2031

.2188

.2344

.2500

.2812

.2969

.3125

.3750

.4370

33

3-1/23-1/23-1/23-1/2

PRICE EACHOVERALL LENGTH

LRADIUS

RMINOR DIAMETER

D1

3-FLUTETOOL NO.

END MILLS

SHANK DIAMETERD2

.060

.060

.060

.060

.120

.120

1/8

3/16

1/4

5/16 5/16 5/16

3/83/8

1/21/25/85/85/85/8

3/43/43/411

2

2

2-1/2

2-1/2

4

Shank Diameter –.0001 to –.0002”Radius +.0000 to –.0005”

28.55

37.00

44.7044.7044.7060.7560.75

94.1594.15

100.95100.95100.95100.95

141.60141.60141.60264.25264.25

26.45

Coated CRE Series, Corner RoundingDouble End

91

END MILLS

Shank Diameter –.0001 to –.0002”Radius +.0000 to –.0005”

.0100

.0156

.0200

.0250

.0300

.0312

.0350

.0400

.0450

.0469

.0500

.0550

.0600

.0625

.0700

.0750

.0781

.0800

.0900

.0938

.1000

.1094

.1250

.1406

.1562

.1718

.1875

.2031

.2188

.2344

.2500

.2812

.2969

.3125

.3750

.4370

33

3-1/23-1/23-1/23-1/2

OVERALL LENGTHL

RADIUSR

MINOR DIAMETERD1

3-FLUTETOOL NO.

SHANK DIAMETERD2

.060

.060

.060

.060

.120

.120

1/8

3/16

1/4

5/16 5/16 5/16

3/83/8

1/21/25/85/85/85/8

3/43/43/411

2

2

2-1/2

2-1/2

4

AlTiN COATEDPRICE EACH

CRE-125-010xCRE-125-015xCRE-125-020xCRE-125-025xCRE-125-030xCRE-125-031x

CRE-187-035xCRE-187-040xCRE-187-045xCRE-187-047xCRE-187-050xCRE-187-055xCRE-187-060xCRE-187-062x


CRE-312-100xCRE-312-109xCRE-312-125xCRE-375-140xCRE-375-156x


CRE-750-281xCRE-750-296xCRE-750-312xCRE-001-375xCRE-001-437x

32.75

37.20

45.85

57.9557.9557.9574.3574.35

111.05111.05124.35124.35124.35124.35

169.75169.75169.75304.80304.80

DRILL-MILLS

92

Drill Point End MillsShank Diameter –.0001 to –.0002”Cutter Diameter 1/32 – 1/4” +.000 –.002” 9/32 – 1 ” +.000 –.003”T.I.R. Maximum .0005”

Multipurpose tool for drilling, milling, spotting, chamfering, and countersinking.

FLUTE LENGTHL2

CUTTER DIAMETERD1

OVERALL LENGTHL1

1/8 3/16

1/4

5/163/8

7/16

1/25/83/4

1-1/22

2-1/2

2-1/22-1/22-1/2

33-1/2

4

1/25/83/4

13/1611

11-1/41-1/2

2-FLUTETOOL NO.

DM-125-290DM-187-290DM-250-290

DM-312-290DM-375-290DM-437-290

DM-500-290DM-625-290DM-750-290

PRICE EACH

2 Flute – 90° Included Point Angle


SHANK DIAMETERD2

1/8 3/16

1/4

5/163/8

7/16

1/25/83/4

FLUTE LENGTHL2

CUTTER DIAMETERD1

OVERALL LENGTHL1

1/8 3/16

1/4

5/163/8

7/16

1/25/83/4

1-1/22

2-1/2

2-1/22-1/22-1/2

33-1/2

4

1/25/83/4

13/1611

11-1/41-1/2

PRICE EACHSHANK DIAMETER

D2

1/8 3/16

1/4

5/163/8

7/16

1/25/83/4

4-FLUTETOOL NO.

DM-125-490DM-187-490DM-250-490

DM-312-490DM-375-490DM-437-490

DM-500-490DM-625-490DM-750-490

13.0018.2022.80

28.3535.5548.05

53.95108.10159.00

13.6019.1023.85

29.8537.4550.60

58.90113.20166.45

DRILL-MILLS

93

Coated Drill Point End MillsShank Diameter –.0001 to –.0002”Cutter Diameter 1/32 – 1/4” +.000 –.002” 9/32 – 1 ” +.000 –.003”T.I.R. Maximum .0005”

Multipurpose tool for drilling, milling, spotting, chamfering, and countersinking.

FLUTE LENGTHL2

CUTTER DIAMETERD1

OVERALL LENGTHL1

1/8 3/16

1/4

5/163/8

7/16

1/25/83/4

1-1/22

2-1/2

2-1/22-1/22-1/2

33-1/2

4

1/25/83/4

13/1611

11-1/41-1/2

2-FLUTETOOL NO.

DM-125-290xDM-187-290xDM-250-290x

DM-312-290xDM-375-290xDM-437-290x

DM-500-290xDM-625-290xDM-750-290x




SHANK DIAMETERD2

1/8 3/16

1/4

5/163/8

7/16

1/25/83/4

FLUTE LENGTHL2

CUTTER DIAMETERD1

OVERALL LENGTHL1

1/8 3/16

1/4

5/163/8

7/16

1/25/83/4

1-1/22

2-1/2

2-1/22-1/22-1/2

33-1/2

4

1/25/83/4

13/1611

11-1/41-1/2

SHANK DIAMETERD2

1/8 3/16

1/4

5/163/8

7/16

1/25/83/4

4-FLUTETOOL NO.

DM-125-490xDM-187-490xDM-250-490x

DM-312-490xDM-375-490xDM-437-490x

DM-500-490xDM-625-490xDM-750-490x

16.6023.3528.25

36.4044.1058.85

67.35124.90180.50


16.1022.5527.20

34.9042.2056.30

62.15119.85173.00

BMS Series, Miniature, Ball Nose, Stub LengthCenter Cutting — 30° Helix

94

.015

.016

.018

.019

.021

.022

.024

.025

.027

.028

.030

.031

.033

.034

.036

.037

.039

.040

.042

.043

.045

.047

.048

.050

.051

.053

.060

.068

.075

32.4529.3029.3024.9524.95

19.90

18.25

18.2516.6516.6516.6516.65

16.65

bMS-010-2bMS-011-2bMS-012-2bMS-013-2bMS-014-2





bMS-035-2bMS-040-2bMS-045-2bMS-050-2

.010

.011

.012

.013

.014

.015

.016

.017

.018

.019

.020

.021

.022

.023

.024

.025

.026

.027

.028

.029

.030

.031

.032

.033

.034

.035

.040

.045

.050

FLUTELENGTH

L2 PRICE EACH

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

OVERALLLENGTH

L1

1/8 1-1/2

2-FLUTETOOL NO.

END MILLS


1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

16.65

Coated BMS Series, Miniature, Ball Nose, Stub LengthCenter Cutting — 30° Helix

95

END MILLS


.015

.016

.018

.019

.021

.022

.024

.025

.027

.028

.030

.031

.033

.034

.036

.037

.039

.040

.042

.043

.045

.047

.048

.050

.051

.053

.060

.068

.075

35.9032.6532.6528.2528.25

23.10

21.50

21.5019.7519.7519.7519.75

19.75

bMS-010-2xbMS-011-2xbMS-012-2xbMS-013-2xbMS-014-2x





bMS-035-2xbMS-040-2xbMS-045-2xbMS-050-2x

.010

.011

.012

.013

.014

.015

.016

.017

.018

.019

.020

.021

.022

.023

.024

.025

.026

.027

.028

.029

.030

.031

.032

.033

.034

.035

.040

.045

.050

FLUTELENGTH

L2

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

OVERALLLENGTH

L1

2-FLUTETOOL NO.

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

AlTiNCOATED

PRICE EACH

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2 19.75

BMR Series, Miniature, Ball NoseCenter Cutting — 30° Helix

96

END MILLS


.010

.011

.012

.013

.014

.015

.016

.017

.018

.019

.020

.021

.022

.023

.024

.025

.026

.027

.028

.029

.030

.031

.032

.033

.034

.035

.040

.045

.050

bMR-010-2bMR-011-2bMR-012-2bMR-013-2bMR-014-2





bMR-035-2bMR-040-2bMR-045-2bMR-050-2

.030

.033

.036

.039

.042

.045

.048

.051

.054

.057

.060

.063

.066

.069

.072

.075

.078

.081

.084

.087

.090

.093

.096

.099

.102

.105

.120

.135

.150

FLUTELENGTH

L2 PRICE EACH

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

OVERALLLENGTH

L1

2-FLUTETOOL NO.

1/8 1-1/2

33.9030.7530.7526.1026.10

20.65

19.15

19.1517.4017.4017.4017.40

17.40

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2 17.40

Coated BMR Series, Miniature, Ball NoseCenter Cutting — 30° Helix

97

END MILLS


.010

.011

.012

.013

.014

.015

.016

.017

.018

.019

.020

.021

.022

.023

.024

.025

.026

.027

.028

.029

.030

.031

.032

.033

.034

.035

.040

.045

.050

bmr-010-2xbmr-011-2xbmr-012-2xbmr-013-2xbmr-014-2x





bmr-035-2xbmr-040-2xbmr-045-2xbmr-050-2x

.030

.033

.036

.039

.042

.045

.048

.051

.054

.057

.060

.063

.066

.069

.072

.075

.078

.081

.084

.087

.090

.093

.096

.099

.102

.105

.120

.135

.150

FLUTELENGTH

L2

CUTTErDIAmETEr

D1

SHANKDIAmETEr

D2

OVErALLLENGTH

L1

2-FLUTETOOL NO.

1/8 1-1/2

37.4034.1034.1029.4529.45

23.85

22.30

22.3020.6020.6020.6020.60

20.60

1/8 1-1/2

1/8 1-1/2

1/8 1-1/2

AlTiNCOATED

PrICE EACH

1/8 1-1/2

1/8 1-1/2

20.60

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/32 – 1/4” +.000–.002” 9/32 – 1” +.000–.003”Ball Radius +.001–.000”T.I.R. Maximum .0005”

END MILLSBEM Series, Ball NoseCenter Cutting — 30° Helix

98

bEm-031-03bEm-046-03bEm-062-03bEm-078-03

bEm-093-03bEm-109-03bEm-125-03

bEm-140-03bEm-156-03bEm-171-03bEm-187-03

bEm-203-03bEm-218-03bEm-234-03bEm-250-03

bEm-281-03bEm-312-03bEm-375-03bEm-437-03

bEm-500-03bEm-562-03bEm-625-03bEm-687-03

bEm-750-03bEm-875-03bEm-001-03

—

1/32 3/64 1/16 5/64

3/32 7/641/8

9/64 5/3211/64 3/16

13/64 7/3215/64

1/4

9/32 5/163/8

7/16

1/2 9/165/8

11/16

3/47/811

5/64 7/64 3/16 3/16

3/83/81/2

1/2 9/165/85/8

5/85/83/43/4

3/413/16

7/81

11-1/41-1/41-3/8

1-1/21-1/21-1/21-3/4

5/16 5/163/8

7/16

1/2 9/165/8

11/16

3/47/811

bEm-031-04 bEm-046-04 bEm-062-04 bEm-078-04

bEm-093-04 bEm-109-04 bEm-125-04

bEm-140-04 bEm-156-04 bEm-171-04 bEm-187-04

bEm-203-04 bEm-218-04 bEm-234-04 bEm-250-04

bEm-281-04 bEm-312-04 bEm-375-04 bEm-437-04

bEm-500-04 bEm-562-04 bEm-625-04 bEm-687-04

bEm-750-04 bEm-875-04 bEm-001-04

bEm-001-06*

bEm-031-02bEm-046-02bEm-062-02bEm-078-02

bEm-093-02bEm-109-02bEm-125-02

bEm-140-02bEm-156-02bEm-171-02bEm-187-02

bEm-203-02bEm-218-02bEm-234-02bEm-250-02

bEm-281-02bEm-312-02bEm-375-02bEm-437-02

bEm-500-02bEm-562-02bEm-625-02bEm-687-02

bEm-750-02bEm-875-02bEm-001-02

—*6 Flute

2-FLUTETOOL NO.

3-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTErDIAmETEr

D1

SHANKDIAmETEr

D2

FLUTELENGTH

L2

OVErALLLENGTH

L1 PrICE EACH

33-1/23-1/2

4

4445

1-1/2

1-1/2

2

2-1/2

2-1/2

1/8

1/8

3/16

1/4

14.5014.5013.1013.10

13.1013.1011.70

18.60

23.30

27.1527.1530.8548.70

53.4078.7094.50

116.35

144.20199.75218.35256.60

END MILLSCoated BEM Series, Ball Nose

Center Cutting — 30° Helix

99


bEm-031-03xbEm-046-03xbEm-062-03xbEm-078-03x

bEm-093-03xbEm-109-03xbEm-125-03x





bEm-750-03xbEm-875-03xbEm-001-03x

—

1/32 3/64 1/16 5/64

3/32 7/641/8

9/64 5/3211/64 3/16

13/64 7/3215/64

1/4

9/32 5/163/8

7/16

1/2 9/165/8

11/16

3/47/811

5/64 7/64 3/16 3/16

3/83/81/2

1/2 9/165/85/8

5/85/83/43/4

3/413/16

7/81

11-1/41-1/41-3/8

1-1/21-1/21-1/21-3/4

5/16 5/163/8

7/16

1/2 9/165/8

11/16

3/47/811


bEm-093-04xbEm-109-04xbEm-125-04x





bEm-750-04xbEm-875-04xbEm-001-04x

bEm-001-06x*


bEm-093-02xbEm-109-02xbEm-125-02x





bEm-750-02xbEm-875-02xbEm-001-02x

—*6 Flute

2-FLUTETOOL NO.

3-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTErDIAmETEr

D1

SHANKDIAmETEr

D2

FLUTELENGTH

L2

OVErALLLENGTH

L1

33-1/23-1/2

4

4445

1-1/2

1-1/2

2

2-1/2

2-1/2

1/8

1/8

3/16

1/4

22.85

27.70

AlTiNCOATED

PrICE EACH

33.7033.7037.4056.95

61.7590.45

106.25130.40

158.20220.00238.65276.85

17.5017.5016.2516.25

16.2516.2514.80

TSB Series, Ball Nose, Stub Length, TaperedCenter Cutting — 30° Helix

100

TSb-250-0TSb-250-1TSb-250-3TSb-250-5TSb-250-7

TSb-375-0TSb-375-1TSb-375-3TSb-375-5TSb-375-7

TSb-500-3TSb-500-5TSb-500-7

1/4

3/8

1/2

1° 1° 30’

3° 5° 7°

1° 1° 30’

3° 5° 7°

3° 5° 7°

.062

.093

.093

.078

.062

.078

.125

.125

.093

2-1/2

2-1/2

3

1/2

3/4

1

41.85

63.95

97.10

PrICE EACH

FLUTELENGTH

L2

OVErALLLENGTH

L1

ANGLE PEr SIDE

rADIUSR

SHANKDIAmETEr

D3-FLUTE

TOOL NO.

END MILLS


TEB Series, Ball Nose, TaperedCenter Cutting — 30° Helix

101

TEb-250-0TEb-250-1TEb-250-3TEb-250-5TEb-250-7

TEb-375-0TEb-375-1TEb-375-3TEb-375-5TEb-375-7

TEb-500-3TEb-500-5TEb-500-7

1/4

3/8

1/2

1° 1° 30’

3° 5° 7°

1° 1° 30’

3° 5° 7°

3° 5° 7°

.062

.093

.093

.078

.062

.078

.125

.125

.093

3

3-1/2

4

11-1/2

13/41/2

1-3/41-3/41-3/41-1/23/4

21-1/41-1/4

46.25

70.60

107.25

PrICE EACH

FLUTELENGTH

L2

OVErALLLENGTH

L1

ANGLE PEr SIDE

rADIUSR

SHANKDIAmETEr

D3-FLUTE

TOOL NO.

END MILLS



“Stealth” cutter-profile. These high performance end mills are engineered for high speed cutting in aluminum, nonferrous and soft materials.


ARB Series, Ball NoseCenter Cutting

102

Arb-125-2Arb-187-2Arb-250-2

Arb-312-2Arb-375-2Arb-500-2

Arb-625-2Arb-750-2Arb-001-2

1/8 3/16

1/4

5/163/81/2

5/83/41

1/25/83/4

13/167/81

1-1/41-1/21-1/2

2-FLUTETOOL NO.

FLUTELENGTH

L2 PrICE EACH

CUTTErDIAmETEr

D1

SHANKDIAmETEr

D2

OVErALLLENGTH

L1

3-FLUTETOOL NO.

——

Arb-250-3

Arb-312-3Arb-375-3Arb-500-3

Arb-625-3Arb-750-3Arb-001-3

END MILLS

1/8 3/16

1/4

5/163/81/2

5/83/41

1-1/22

2-1/2

2-1/22-1/2

3

3-1/244

14.5520.5525.75

28.2032.5556.55

99.95 145.50220.45

103

Coated ARB Series, Ball NoseCenter Cutting

Arb-125-2SArb-187-2SArb-250-2S



1/8 3/16

1/4

5/163/81/2

5/83/41

1/25/83/4

13/167/81

1-1/41-1/21-1/2

2-FLUTETOOL NO.

FLUTELENGTH

L2

CUTTErDIAmETEr

D1

SHANKDIAmETEr

D2

OVErALLLENGTH

L1

3-FLUTETOOL NO.

——

Arb-250-3S



END MILLS

1/8 3/16

1/4

5/163/81/2

5/83/41

1-1/22

2-1/2

2-1/22-1/2

3

3-1/244

103


“Stealth” cutter-profile. These high performance end mills are engineered for high speed cutting in aluminum, nonferrous and soft materials.


17.5524.9030.10

35.2539.2564.95

111.65159.55240.80

COATINGDEVELOPED


ALU-SCOATED

PrICE EACH

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/8 – 1/4” +.000–.002” 5/16 – 5/8” +.000–.003”T.I.R. Maximum .0005”Radius ±.0005”

These short flute 220° ball nose end mills feature a reduced neck diameter and are ideal for copy milling and deep pocket milling applications.

The special geometry allows a tool inclination of up to 15° with optimal chip evacuation for increased feed rates.

SBM Series, Spherical Ball NoseCenter Cutting — 30° Helix

104

Sbm-125-2Sbm-187-2Sbm-250-2

Sbm-312-2Sbm-375-2Sbm-500-2Sbm-625-2

.0620

.0938

.1250

.1562

.1875.2500.3125

FLUTELENGTH

L2

PrICEEACH

CUTTErDIA.D1

SHANKDIA.D2

OVEr-ALL

LENGTHL1

3-FLUTETOOL NO.

END MILLS

1/8 3/16

1/4

5/163/81/25/8

3

2-FLUTETOOL NO.

NECKDIA.D3

4-FLUTETOOL NO.

Sbm-125-3Sbm-187-3Sbm-250-3

Sbm-312-3Sbm-375-3Sbm-500-3Sbm-625-3

Sbm-125-4Sbm-187-4Sbm-250-4

Sbm-312-4Sbm-375-4Sbm-500-4Sbm-625-4

4

1/4

5/163/81/25/8

NECKLENGTH

L3

rEDUCEDNECK

LENGTHL4

.100

.150

.200

.250

.300

.400

.500

0.2500.3500.500

0.6000.8000.9001.000

1.1001.2001.200

1.2001.2001.5001.700

.100

.150

.200

.250

.300

.400

.500

rADIUS

61.75

77.65 99.70124.10154.25

Coated SBM Series, Spherical Ball NoseCenter Cutting — 30° Helix

105

END MILLS

.0620

.0938

.1250

.1562

.1875.2500.3125

FLUTELENGTH

L2

CUTTErDIA.D1

SHANKDIA.D2

OVEr-ALL

LENGTHL1

3-FLUTETOOL NO.

1/8 3/16

1/4

5/163/81/25/8

3

2-FLUTETOOL NO.

NECKDIA.D3rADIUS

4-FLUTETOOL NO.

4

1/4

5/163/81/25/8

NECKLENGTH

L3

rEDUCEDNECK

LENGTHL4

.100

.150

.200

.250

.300

.400

.500

0.2500.3500.500

0.6000.8000.9001.000

1.1001.2001.200

1.2001.2001.5001.700

.100

.150

.200

.250

.300

.400

.500

Sbm-125-2xSbm-187-2xSbm-250-2x

Sbm-312-2xSbm-375-2xSbm-500-2xSbm-625-2x





AlTiN COATEDPrICE EACH

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/8 – 1/4” +.000–.002” 5/16 – 5/8” +.000–.003”T.I.R. Maximum .0005”Radius ±.0005”

These short flute 220° ball nose end mills feature a reduced neck diameter and are ideal for copy milling and deep pocket milling applications.

The special geometry allows a tool inclination of up to 15° with optimal chip evacuation for increased feed rates.

66.95

88.05110.50137.75169.80

BLL Series, Ball Nose, Long LengthCenter Cutting — 30° Helix

106

bLL-187-2bLL-250-2bLL-312-2

bLL-375-2bLL-437-2bLL-500-2

bLL-625-2bLL-750-2bLL-001-2

bLL-187-4bLL-250-4bLL-312-4

bLL-375-4bLL-437-4bLL-500-4

bLL-625-4bLL-750-4bLL-001-4

3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/41-1/81-1/8

1-1/822

2-1/4

2-1/233

34-1/24-1/2

5

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1 PRICE EACH


END MILLS

24.7529.8034.65

39.4062.3068.35

120.95184.45279.30

Coated BLL Series, Ball Nose, Long LengthCenter Cutting — 30° Helix

107

bLL-187-2xbLL-250-2xbLL-312-2x






3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/41-1/81-1/8

1-1/822

2-1/4

2-1/233

34-1/24-1/2

5

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1


END MILLS

AlTiNCOATED

PrICE EACH

29.1534.2539.30

46.1574.6080.80

132.65198.45299.65

108

BEL Series, Ball Nose, Extra LongCenter Cutting — 30° Helix

bEL-187-2bEL-250-2bEL-312-2

bEL-375-2bEL-437-2bEL-500-2

bEL-625-2bEL-750-2bEL-001-2

bEL-187-4bEL-250-4bEL-312-4

bEL-375-4bEL-437-4bEL-500-4

bEL-625-4bEL-750-4bEL-001-4

3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

1-1/81-1/21-5/8

1-3/433

3

344

466

6

27.2032.8537.75

42.2065.7075.15

133.25202.30306.65

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTErDIAmETEr

D1

SHANKDIAmETEr

D2

FLUTELENGTH

L2

OVErALLLENGTH

L1 PrICE EACH

END MILLS


109

Coated BEL Series, Ball Nose, Extra LongCenter Cutting — 30° Helix

bEL-187-2xbEL-250-2xbEL-312-2x






3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

1-1/81-1/21-5/8

1-3/433

3

344

466

6

31.6539.2047.25

51.7578.1087.70

144.95216.35327.00

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTErDIAmETEr

D1

SHANKDIAmETEr

D2

FLUTELENGTH

L2

OVErALLLENGTH

L1

END MILLS

AlTiNCOATED

PrICE EACH


BLR Series, Ball Nose, Long ReachCenter Cutting — 30° Helix

110

bLr-187-2bLr-250-2bLr-312-2

bLr-375-2bLr-437-2bLr-500-2

bLr-625-2bLr-750-2bLr-001-2

bLr-187-4bLr-250-4bLr-312-4

bLr-375-4bLr-437-4bLr-500-4

bLr-625-4bLr-750-4bLr-001-4

3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

22-1/22-5/8

2-3/44-1/24-1/2

4-1/2

344

466

6

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTErDIAmETEr

D1

SHANKDIAmETEr

D2

FLUTELENGTH

L2

OVErALLLENGTH

L1 PrICE EACH

3/81/25/8

3/411

1-1/41-1/21-1/2



L3

L2

D1

END MILLS

29.9536.1041.55

47.9072.3082.70

146.55222.60337.45

Coated BLR Series, Ball Nose, Long ReachCenter Cutting — 30° Helix

111

bLr-187-2xbLr-250-2xbLr-312-2x






3/161/4

5/16

3/8 7/16

1/2

5/83/41

3/161/4

5/16

3/8 7/16

1/2

5/83/41

22-1/22-5/8

2-3/44-1/24-1/2

4-1/2

344

466

6

34.4542.5551.10

57.6084.7595.35

158.25236.65357.70

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTErDIAmETEr

D1

SHANKDIAmETEr

D2

FLUTELENGTH

L2

OVErALLLENGTH

L1

3/81/25/8

3/411

1-1/41-1/21-1/2

L3

L2

D1

END MILLS

AlTiNCOATED

PrICE EACH



Shank Diameter –.0001 to –.0002”Cutter Diameter 1/8 – 1/4” +.000–.002” 9/32 – 1/2” +.000–.003”Ball Radius +.000–.005”T.I.R. Maximum .0005”

END MILLSBED Series, Ball Nose, Stub Length, Double End

Center Cutting — 30° Helix

112

1/8 5/32 3/16

7/321/4

9/32

5/163/8

7/161/2

bED-125-4bED-156-4bED-187-4

bED-218-4bED-250-4bED-281-4

bED-312-4bED-375-4bED-437-4bED-500-4

bED-125-2bED-156-2bED-187-2

bED-218-2bED-250-2bED-281-2

bED-312-2bED-375-2bED-437-2bED-500-2

1/8 3/16 3/16

1/41/4

5/16

5/163/8

7/161/2

1/4 5/163/8

1/2

1/2 9/16 9/165/8

2

2-1/2

2-1/22-1/22-1/2

3

19.1525.5025.50

32.0532.0546.65

46.6550.1069.5084.65

2-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTErDIAmETEr

D1

SHANKDIAmETEr

D2

FLUTELENGTH

L2

OVErALLLENGTH

L1 PrICE EACH

113

the SHREDDERROUGHING END MILLCoated SHR Series

38° Helix

SHR-250-4XSHR-312-4XSHR-375-4XSHR-500-4XSHR-625-4XSHR-750-4XSHR-001-4X

1/45/163/81/25/83/41

1/45/163/81/25/83/41

2-1/22-1/22-1/2

33-1/2

44

36.7542.5051.9574.80

130.00179.85245.60

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

3/413/16

7/81

1-1/41-1/41-1/4

END MILLS

AlTiNCOATED

PRICE EACH

Shank Diameter –.0001 to –.0002”Cutter Diameter +.000–.003”T.I.R. Maximum .0005”

• Designed to generate the maximum metal removal rates in most applications.• All tools 3/8" and over have Weldon flats

114

the SHREDDERLONG LENGTH ROUGHING END MILL

Coated SHL Series38° Helix

SHL-250-4XSHL-312-4XSHL-375-4XSHL-500-4XSHL-625-4XSHL-750-4XSHL-001-4X

1/45/163/81/25/83/41

1/45/163/81/25/83/41

333

4-1/2555

45.9553.1564.9593.50

162.50224.85307.00

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

1-1/81-1/81-1/4

22-1/42-1/22-1/2

END MILLS

AlTiNCOATED

PRICE EACH


• Designed to generate the maximum metal removal rates in most applications.• All tools 3/8" and over have Weldon flats

115

the SHREDDERROUGHING END MILL - For Aluminum

SAR Series38° Helix

SAL-250-3SAL-312-3SAL-375-3SAL-500-3SAL-625-3SAL-750-3SAL-001-3

1/45/163/81/25/83/41

1/45/163/81/25/83/41

333

4-1/2555

41.4546.5058.2584.00

149.80210.80286.70

3-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

1-1/81-1/81-1/4

22-1/42-1/22-1/2

END MILLS

PRICE EACH


• Designed to generate the maximum metal removal rates in most applications.• Designed specifically for aluminum applications.• All tools 3/8" and over have Weldon flats

SAR-250-3SAR-312-3SAR-375-3SAR-500-3SAR-625-3SAR-750-3SAR-001-3

1/45/163/81/25/83/41

1/45/163/81/25/83/41

2-1/22-1/22-1/2

33-1/2

44

32.4036.1545.5066.60

118.30165.80225.30

3-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

3/413/16

7/81

1-1/41-1/41-1/4

PRICE EACH

LONG LENGTH, ROUGHING END MILL - For AluminumSAL Series38° Helix

116

the V-HEMOTHHIGH VELOCITY

VARIABLE HELIX END MILLCoated VHM Series, Corner Radius

END MILLS

Shank Diameter –.0001 to –.0002”Cutter Diameter 1/4" +.000–.002" 5/16 – 1” +.000–.003”T.I.R. Maximum .0005”Corner Radius ± .0005"

• Variable pitch• High production/high speed milling• Excellent surface finishes• Eliminates chatter• Reduces machine vibration• All tools 3/8" and over have Weldon flats

Flutes Offset for Vibration Reduction

VHM-125-4XVHM-187-4XVHM-250-4XVHM-312-4XVHM-375-4XVHM-437-4XVHM-500-4XVHM-625-4XVHM-750-4XVHM-001-4X

1/83/161/45/163/87/161/25/83/41

1-1/22

2-1/22-1/22-1/22-1/2

33-1/2

44

0.0100.0100.0200.0200.0200.0200.0300.0300.0300.030

1/25/83/4

13/163/411

1-1/41-1/21-1/2

14.8022.8527.7033.7037.4056.4561.75

112.65167.70252.95

4-FLUTETOOL NO.

SHANKDIAMETER

OVERALLLENGTH

CORNERRADIUS

FLUTELENGTH


1/83/161/4

5/163/8

7/161/25/83/41

CUTTERDIAMETER

117

the V-HEMOTHLONG LENGTH, HIGH VELOCITY

VARIABLE HELIX END MILLCoated VHM Series, Corner Radius

END MILLS



VLM-187-4XVLM-250-4XVLM-312-4XVLM-375-4XVLM-437-4XVLM-500-4XVLM-625-4XVLM-750-4XVLM-001-4X

3/161/45/163/87/161/25/83/41

2-1/2333

4-1/24-1/2

555

0.0100.0200.0200.0200.0200.0300.0300.0300.030

3/41-1/81-1/81-1/4

22-1/42-1/42-1/22-1/2

29.2034.2539.3046.1574.6080.80

140.65210.40317.65

4-FLUTETOOL NO.

SHANKDIAMETER

OVERALLLENGTH

CORNERRADIUS

FLUTELENGTH


3/161/4

5/163/8

7/161/25/83/41

CUTTERDIAMETER


118

the V-HEMOTHEXTRA-LONG LENGTH, HIGH VELOCITY

VARIABLE HELIX END MILLCoated VLR Series, Corner Radius


• Variable pitch• Reduced neck allows for greater clearance• High production/high speed milling• Excellent surface finishes• Eliminates chatter• Reduces machine vibration• All tools 3/8" and over have Weldon flats

VLR-187-4XVLR-250-4XVLR-312-4XVLR-375-4XVLR-437-4XVLR-500-4XVLR-625-4XVLR-750-4XVLR-001-4X

3/161/4

5/163/8

7/161/25/83/41

344466666

0.0100.0200.0200.0200.0200.0300.0300.0300.030

3/81/25/83/411

1-1/41-1/21-1/2

33.7546.2552.1067.9579.70

117.10203.65230.50344.00

4-FLUTETOOL NO.

SHANKDIAMETER

D2

OVERALLLENGTH

L1

CORNERRADIUS

FLUTELENGTH

L2


3/161/4

5/163/8

7/161/25/83/41

CUTTERDIAMETER

D1

22-1/22-5/82-3/44-1/24-1/24-1/24-1/24-1/2

REDUCED NECK

L3


119

VHB-125-4XVHB-187-4XVHB-250-4XVHB-312-4XVHB-375-4XVHB-500-4XVHB-625-4XVHB-750-4XVHB-001-4X

1/83/161/4

5/163/81/25/83/41

1/83/161/4

5/163/81/25/83/41

1-1/22

2-1/22-1/22-1/2

33-1/2

44

14.8022.8527.7033.7037.4061.75

112.65167.70252.95

4-FLUTETOOL NO.

CUTTERDIAMETER

D1

SHANKDIAMETER

D2

FLUTELENGTH

L2

OVERALLLENGTH

L1

1/25/83/4

13/163/41

1-1/41-1/21-1/2

END MILLS

AlTiNCOATED

PRICE EACH

the V-HEMOTHBALL NOSE, HIGH VELOCITYVARIABLE HELIX END MILL

Coated VHB Series

Shank Diameter –.0001 to –.0002”Cutter Diameter +.000 - .001"T.I.R. Maximum .0005”Ball Radius –.0005"


120

the V-HEMOTHBALL NOSE, LONG LENGTH, HIGH VELOCITY

VARIABLE HELIX END MILLCoated VLB Series

END MILLS

VLB-187-4XVLB-250-4XVLB-312-4XVLB-375-4XVLB-437-4XVLB-500-4XVLB-625-4XVLB-750-4XVLB-001-4X

3/161/45/163/87/161/25/83/41

344466666

22-1/22-5/82-3/44-1/24-1/24-1/24-1/24-1/2

3/81/25/83/411

1-1/41-1/21-1/2

33.7546.2552.1067.9579.70

117.10203.65230.50344.00

4-FLUTETOOL NO.

SHANKDIAMETER

OVERALLLENGTH

REDUCEDNECK

FLUTELENGTH


3/161/4

5/163/8

7/161/25/83/41

CUTTERDIAMETER

Shank Diameter –.0001 to –.0002”Cutter Diameter +.000–.001"T.I.R. Maximum .0005”Ball Radius –.0005"


121

Coated HMBM Series, Universal Hard Milling, Ball NoseCenter Cutting

METRIC END MILLS

HMBM-010-2XHMBM-015-2XHMBM-020-2XHMBM-025-2X

HMBM-030-2XHMBM-040-2XHMBM-050-2XHMBM-060-2XHMBM-080-2X

HMBM-100-2XHMBM-120-2XHMBM-160-2XHMBM-200-2X

1.0 1.5 2.0 2.5

3.0 4.0 5.0 6.0 8.0

10.012.016.020.0

4 4 6 6

6 6 6 6 8

10121620

1.5 2.0 3.0 4.0

4.5 6.0 7.5 9.012.0

15.018.024.030.0

50 50 57 57

70 70 80 90100

100110140160

44.4044.4063.6063.60

72.1072.1077.3080.90

103.30

115.35149.35249.35320.80

2-FLUTETOOL NO.

CUTTERDIAMETERD1, mm

SHANKDIAMETERD2, mm

FLUTELENGTHL2, mm

OVERALLLENGTHL1, mm

4-FLUTETOOL NO.

HMBM-060-4XHMBM-080-4X

HMBM-100-4XHMBM-120-4X


Shank Dia. –0.0025 to –0.005 mmCutter Dia. 1 to 3 mm +0.000 –0.014 mm 4 to 6 mm +0.000 –0.018 mm 8 to 10 mm +0.000 –0.022 mm 12 to 16 mm +0.000 –0.027 mm 20 mm +0.000 –0.033 mmT.I.R. Maximum 0.012 mm

Engineered with a negative rake angle, these high-tech ball nose end mills are specifically engineered for numerous milling applications in hard materials.

The unique tool geometry provides maximum mill-ing performance in finishing, semi-finishing, and roughing cuts.


122

BMRM Series, Miniature Ball NoseCenter Cutting – 30° Helix

METRIC END MILLS

BMRM-005-2BMRM-006-2BMRM-007-2BMRM-008-2BMRM-009-2

BMRM-010-2BMRM-011-2BMRM-012-2BMRM-013-2



1.5 1.8 2.1 2.4 2.7

3.0 3.3 3.8 3.9

4.2 4.2 4.8 5.3

6.0 8.0 9.010.5

2-FLUTETOOL NO.


SHANKDIAMETERD2, mm

FLUTELENGTHL2, mm

OVERALLLENGTHL1, mm PRICE EACH

4

0.50.60.70.80.9

1.01.11.21.3

1.41.51.61.8

2.02.53.03.5

50

50

50

4-FLUTETOOL NO.




4

4

4 50

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 0.2 to 3.0 mm +0.000 to –0.014 mm 3.5 mm +0.000 to –0.018 mmT.I.R. Maximum 0 .012 mm

These precision miniature end mills are ideally suited for finishing and semi-finishing cuts and universal milling applications in soft, medium, and hard materials.

18.20

16.75

16.75

16.75

123

Coated BMRM Series, Miniature Ball NoseCenter Cutting – 30° Helix

METRIC END MILLS

BMRM-005-2XBMRM-006-2XBMRM-007-2XBMRM-008-2XBMRM-009-2X

BMRM-010-2XBMRM-011-2XBMRM-012-2XBMRM-013-2X



1.5 1.8 2.1 2.4 2.7

3.0 3.3 3.8 3.9

4.2 4.2 4.8 5.3

6.0 8.0 9.010.5

2-FLUTETOOL NO.


SHANKDIAMETERD2, mm

FLUTELENGTHL2, mm

OVERALLLENGTHL1, mm

4

0.50.60.70.80.9

1.01.11.21.3

1.41.51.61.8

2.02.53.03.5

50

50

50

4-FLUTETOOL NO.




4

4

4 50

AlTiNCOATED

PRICE EACH


These precision miniature end mills are ideally suited for finishing and semi-finishing cuts and universal milling applications in soft, medium, and hard materials.

22.35

20.85

20.85

20.85

124

MMBM Series, Ball Nose, Mold MakingCenter Cutting – 30° Helix

METRIC END MILLS

MMBM-003-3MMBM-003-6MMBM-004-3MMBM-004-8

MMBM-005-5 MMBM-005-10MMBM-006-5

MMBM-006-12

MMBM-007-5 MMBM-007-12

MMBM-008-5 MMBM-008-10 MMBM-008-16

MMBM-009-5 MMBM-009-10 MMBM-009-16

MMBM-010-6 MMBM-010-8

MMBM-010-11 MMBM-010-12 MMBM-010-15 MMBM-010-20

MMBM-012-7 MMBM-012-15 MMBM-012-20

MMBM-015-7 MMBM-015-15 MMBM-015-20

MMBM-020-7 MMBM-020-15 MMBM-020-20

MMBM-030-12 MMBM-030-15 MMBM-040-15 MMBM-050-15

0.30.30.40.4

0.50.50.60.6

0.8

0.9

1.0

1.2

1.5

2.0

3.03.04.05.0

2-FLUTETOOL NO.


SHANKDIAMETERD2, mm

FLUTELENGTHL2, mm


REDUCEDNECK

DIAMETERD3, mm

REDUCEDNECK

LENGTHL3, mm

0.280.280.380.38

0.480.480.580.58

0.78

0.88

0.95

1.15

1.45

1.90

2.902.903.804.80

3 6 3 8

510 512

512

51016

51016

6 811121520

71520

71520

71520

12151515

4

4

4

6

6

6

6

6

0.30.30.40.4

0.50.50.60.6

0.8

0.9

1.0

1.2

1.5

2.0

3.03.04.05.0

50

50

50

50

57

57

57

57

30.00

39.5539.5534.0534.05

28.20

28.20

25.75

25.75

30.00

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 0.3 to 3.0 mm +0.000 –0.014 mm 4.0 to 5.0 mm +0.000 –0.018 mmT.I.R. Maximum 0.012 mmThese highest precision ball nose end mills feature multiple neck length dimensions in a wide range of cutting diameters to provide the best geometry for finishing cuts in mold making applications.

A positive rake angle supports maximum cutting performance in medium and hard materials for conventional side milling and slotting.

4

4

50

50

28.20

28.20

28.20

0.7 0.68 0.7

125

Coated MMBM Series, Ball Nose, Mold MakingCenter Cutting – 30° Helix

METRIC END MILLS

MMBM-003-3XMMBM-003-6XMMBM-004-3XMMBM-004-8X

MMBM-005-5X MMBM-005-10XMMBM-006-5X

MMBM-006-12X

MMBM-007-5X MMBM-007-12X

MMBM-008-5X MMBM-008-10X MMBM-008-16X


MMBM-010-6XMMBM-010-8X

MMBM-010-11X MMBM-010-12X MMBM-010-15X MMBM-010-20X




MMBM-030-12X MMBM-030-15X MMBM-040-15X MMBM-050-15X

0.30.30.40.4

0.50.50.60.6

0.8

0.9

1.0

1.2

1.5

2.0

3.03.04.05.0

2-FLUTETOOL NO.


SHANKDIAMETERD2, mm

FLUTELENGTHL2, mm

OVERALLLENGTHL1, mm

REDUCEDNECK

DIAMETERD3, mm

0.280.280.380.38

0.480.480.580.58

0.78

0.88

0.95

1.15

1.45

1.90

2.902.903.804.80

3 6 3 8

510 512

512

51016

51016

6 811121520

71520

71520

71520

12151515

4

4

4

6

6

6

2.902.903.804.80

0.30.30.40.4

0.50.50.60.6

0.8

0.9

1.0

1.2

1.5

2.0

3.03.04.05.0

50

50

50

50

57

57

57

57

34.40

44.0544.0538.4538.45

32.55

32.55

32.55

30.00

30.00

34.40

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 0.3 to 3.0 mm +0.000 –0.014 mm 4.0 to 5.0 mm +0.000 –0.018 mmT.I.R. Maximum 0.012 mm

These highest precision ball nose end mills feature multiple neck length dimensions in a wide range of cutting diameters to provide the best geometry for finishing cuts in mold making applications.


AlTiNCOATED

PRICE EACH

REDUCEDNECK

LENGTHL3, mm

6

4

4 50

50

32.55

32.55

0.7 0.68 0.7

126

SFBM Series, HSC Shrink Fit, Ball NoseCenter Cutting – 30° Helix

METRIC END MILLS

SFBM-002-0SFBM-003-0SFBM-003-1

SFBM-004-0SFBM-004-1SFBM-005-1SFBM-005-3SFBM-005-5



SFBM-010-3SFBM-010-8

0.20.30.3

0.40.40.50.50.5

0.6

0.8

6

6

6

6

0.30.40.4

0.50.50.60.50.5

0.70.60.6

1.00.80.8

57

57

57

57

52.0045.9045.90

44.7044.7042.6042.6044.70

42.6042.6044.70

40.6040.6044.40

38.5540.60

2-FLUTETOOL NO.


SHANKDIAMETERD2, mm

FLUTELENGTHL2, mm


REDUCEDNECK

DIAMETERD3, mm

——

0.25

—0.350.450.450.45

0.55

0.75

——1.0

—1.21.63.35.1

1.74.56.2

2.55.28.0

3.38.0

1.0 6 0.95 57 1.3

Shank Dia. –0.0025 to –0.005 mmCutter Dia. +0.000 –0.014 mmT.I.R. Maximum 0.012 mm

These highest precision finishing ball nose end mills are suitable for HSC applications and are engineered for shrink-fit tool holding.

A positive rake angle supports maximum cutting performance in soft, medium, and hard materials for conventional side milling and slotting.

REDUCEDNECK

LENGTHL3, mm

127

SFBM Series, HSC Shrink Fit, Ball NoseCenter Cutting – 30° Helix

METRIC END MILLS


SFBM-014-15


SFBM-016-22SFBM-018-5

SFBM-020-5SFBM-020-9SFBM-025-6SFBM-025-9

SFBM-030-8 SFBM-030-15SFBM-035-9

SFBM-040-10 SFBM-040-20

SFBM-050-11 SFBM-050-25 SFBM-060-12 SFBM-060-25

1.21.21.41.4

1.51.51.61.81.8

2.02.02.52.5

3.03.03.54.04.0

5.05.06.06.0

1.51.21.82.3

1.91.52.02.32.3

2.52.53.02.5

4.04.04.55.05.0

6.06.07.57.5

36.7038.7534.8036.65

34.8036.6534.8036.6534.80

33.2035.2033.2035.20

31.5033.8031.5031.5035.20

29.9531.7529.4531.75

2-FLUTETOOL NO.


SHANKDIAMETERD2, mm

FLUTELENGTHL2, mm


REDUCEDNECK

DIAMETERD3, mm

1.151.151.351.35

1.451.451.551.551.75

1.951.952.402.40

2.902.903.403.903.90

4.904.905.905.90

3.5 8.0 3.815.0

4.9 9.5 5.022.0 5.3

5.5 9.5 6.0 9.5

8.015.0 9.510.020.0

11.025.012.525.0

6

6

6

6

6

57

57

57

57

57




REDUCEDNECK

LENGTHL3, mm

128

Coated SFBM Series, HSC Shrink Fit, Ball NoseCenter Cutting – 30° Helix

METRIC END MILLS

0.20.30.3

0.40.40.50.50.5

0.6

0.8

6

6

6

6

0.30.40.4

0.50.50.60.50.5

0.70.60.6

1.00.80.8

57

57

57

57

2-FLUTETOOL NO.


SHANKDIAMETERD2, mm

FLUTELENGTHL2, mm

OVERALLLENGTHL1, mm

REDUCEDNECK

DIAMETERD3, mm

1.0 6 0.95 57 1.3

SFBM-002-0XSFBM-003-0XSFBM-003-1X

SFBM-004-0XSFBM-004-1XSFBM-005-1XSFBM-005-3XSFBM-005-5X



SFBM-010-3XSFBM-010-8X

AlTiNCOATED

PRICE EACH56.8550.6550.65

49.3549.3547.2547.2549.35

47.2547.2549.35

45.1045.1049.05

43.0545.10

——

0.25

—0.350.450.450.45

0.55

0.75

——1.0

—1.21.63.35.1

1.74.56.2

2.55.28.0

3.38.0




REDUCEDNECK

LENGTHL3, mm

129

Coated SFBM Series, HSC Shrink Fit, Ball NoseCenter Cutting – 30° Helix

MetriC eND MiLLS

1.21.21.41.4

1.51.51.61.81.8

2.02.02.52.5

3.03.03.54.04.0

5.05.06.06.0

1.51.21.82.3

1.91.52.02.32.3

2.52.53.02.5

4.04.04.55.05.0

6.06.07.57.5

41.2043.3039.3041.10

39.3041.1039.3041.1039.30

37.6539.7037.6539.70

35.9038.3035.9035.9039.70

34.3036.1533.8536.15

2-FLUTETOOL NO.

CUTTERDIAmETERD1, mm

SHANKDIAmETERD2, mm

FLUTELENGTHL2, mm

OVERALLLENGTHL1, mm

REDUCEDNECK

DIAmETERD3, mm

1.151.151.351.35

1.451.451.551.551.75

1.951.952.402.40

2.902.903.403.903.90

4.904.905.905.90

3.5 8.0 3.815.0

4.9 9.5 5.022.0 5.3

5.5 9.5 6.0 9.5

8.015.0 9.510.020.0

11.025.012.525.0

6

6

6

6

6

57

57

57

57

57

AlTiNCOATED

PRICE EACHSFbm-012-3xSFbm-012-8xSFbm-014-3x

SFbm-014-15x

SFbm-015-4xSFbm-015-9xSFbm-016-5x

SFbm-016-22xSFbm-018-5x

SFbm-020-5xSFbm-020-9xSFbm-025-6xSFbm-025-9x

SFbm-030-8x SFbm-030-15xSFbm-035-9x

SFbm-040-10x SFbm-040-20x

SFbm-050-11x SFbm-050-25x SFbm-060-12x SFbm-060-25x




REDUCEDNECK

LENGTHL3, mm

130

BMHM Series, High Performance, Ball NoseCenter Cutting – 38° Helix

MetriC eND MiLLS

bmHm-030-4bmHm-040-4bmHm-050-4bmHm-060-4



3 4 5 6

8101214

16182025

4 4 6 6

8101214

16182025

8121518

20222535

35454550

50 50 57 57

63 72 83 83

92 92104127

16.0516.0520.2020.20

24.9529.4046.9054.50

86.95116.85148.50230.90

4-FLUTETOOL NO.


SHANKDIAmETERD2, mm

FLUTELENGTHL2, mm


Shank Dia. –0.0025 to –0.008 mmCutter Dia. 3 mm +0.000 –0.014 mm 4 to 6 mm +0.000 –0.018 mm 8 to 10 mm +0.000 –0.022 mm 12 to 18 mm +0.000 –0.027 mm 20 to 25 mm +0.000 –0.033 mmT.I.R. Maximum 0.012 mm

These high performance ball nose end mills feature a 4-flute geometry with a high helix of 38°.

The end mills are ideal for semi-finishing, finishing, and slotting cuts in steels, stainless steels, high temperature alloys, and other difficult to machine materials.

131

Coated BMHM Series, High Performance, Ball NoseCenter Cutting – 38° Helix

MetriC eND MiLLS

bmHm-030-4xbmHm-040-4xbmHm-050-4xbmHm-060-4x



3 4 5 6

8101214

16182025

4 4 6 6

8101214

16182025

8121518

20222535

35454550

50 50 57 57

63 72 83 83

92 92104127

20.1020.1024.3524.35

31.1535.7058.5065.65

98.15130.25167.90250.30

4-FLUTETOOL NO.


SHANKDIAmETERD2, mm

FLUTELENGTHL2, mm

OVERALLLENGTHL1, mm


Shank Dia. –0.0025 to –0.008 mmCutter Dia. 3 mm +0.000 –0.014 mm 4 to 6 mm +0.000 –0.018 mm 8 to 10 mm +0.000 –0.022 mm 12 to 18 mm +0.000 –0.027 mm 20 to 25 mm +0.000 –0.033 mmT.I.R. Maximum 0.012 mm

These high performance ball nose end mills feature a 4-flute geometry with a high helix of 38°.

The end mills are ideal for semi-finishing, finishing, and slotting cuts in steels, stainless steels, high temperature alloys, and other difficult to machine materials.

132


These precision miniature end mills are ideal for finishing and semi-finishing cuts and universal milling applications in soft, medium, and hard materials.

AMrM Series, MiniatureCenter Cutting — 30° Helix

0.20.30.40.50.6

0.70.80.91.01.1

1.21.31.41.51.6

1.71.81.92.02.53.03.5

AmRm-002-2AmRm-003-2AmRm-004-2AmRm-005-2AmRm-006-2



AmRm-017-2AmRm-018-2AmRm-019-2AmRm-020-2AmRm-025-2AmRm-030-2AmRm-035-2

0.4 0.9 1.2 1.5 1.8

2.1 2.4 2.7 3.0 3.3

3.8 3.9 4.2 4.2 4.8

5.1 5.3 5.7 6.0 8.0 9.010.5

28.0524.4518.6016.2516.25

14.60

14.60

14.60

FLUTELENGTHL2, mm PRICE EACH


SHANKDIAmETERD2, mm

OVERALLLENGTHL1, mm

MetriC eND MiLLS

2-FLUTETOOL NO.

4

4

4

4

50

50

50

50

133

Coated AMrM Series, MiniatureCenter Cutting — 30° Helix

MetriC eND MiLLS

0.20.30.40.50.6

0.70.80.91.01.1

1.21.31.41.51.6

1.71.81.92.02.53.03.5

0.4 0.9 1.2 1.5 1.8

2.1 2.4 2.7 3.0 3.3

3.8 3.9 4.2 4.2 4.8

5.1 5.3 5.7 6.0 8.0 9.010.5

32.4528.7522.7520.4520.45

18.60

18.60

18.60

FLUTELENGTHL2, mm


SHANKDIAmETERD2, mm

OVERALLLENGTHL1, mm

2-FLUTETOOL NO.

4

4

4

4

50

50

50

50

AlTiNCOATED

PRICE EACH

AmRm-002-2xAmRm-003-2xAmRm-004-2xAmRm-005-2xAmRm-006-2x



AmRm-017-2xAmRm-018-2xAmRm-019-2xAmRm-020-2xAmRm-025-2xAmRm-030-2xAmRm-035-2x


These precision miniature end mills are ideal for finishing and semi-finishing cuts and universal milling applications in soft, medium, and hard materials.

134


These highest precision end mills feature multiple corner radii and multiple neck length dimensions in a wide range of cutting diameters to provide the best available geometry for finish-ing cuts in mold making applications.


MMrM Series, Mold MakingCenter Cutting — 30° Helix

0.50.50.60.6

0.8

0.9

1.0

1.2

1.5

mmRm-005-5 mmRm-005-10mmRm-006-5

mmRm-006-12

mmRm-007-5 mmRm-007-12

mmRm-008-5 mmRm-008-10 mmRm-008-16

mmRm-009-5 mmRm-009-10 mmRm-009-16

mmRm-010-6mmRm-010-8

mmRm-010-11 mmRm-010-12 mmRm-010-15 mmRm-010-20

mmRm-012-7 mmRm-012-15 mmRm-012-20

mmRm-015-7 mmRm-015-15 mmRm-015-25

0.50.50.60.6

0.8

0.9

1.0

1.2

1.5

23.20

23.20

25.65

25.65

25.65


CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

OVERALLLENGTHL1, mm

MetriC eND MiLLS

2-FLUTETOOL NO.

4

6

6

6

6

50

50

50

57

57

REDUCED NECK DIA.D3, mm

CORNERRADIUSR, mm

0.480.480.580.58

0.78

0.88

0.95

1.15

1.45

510 512

512

51016

51016

6 811121520

71520

71525

0.10

0.10

0.10

0.10

0.15

4 50 0.05 27.25

REDUCEDNECK

LENGTHL3, mm

0.7 4 0.68 50 0.7 0.10 27.25

135

MMrM Series, Mold MakingCenter Cutting — 30° Helix

2

3

4

5

6

mmRm-020-7 mmRm-020-15 mmRm-020-30

mmRm-030-8 mmRm-030-15 mmRm-030-30

mmRm-040-9 mmRm-040-15 mmRm-040-30

mmRm-050-10 mmRm-050-15 mmRm-050-30

mmRm-060-11 mmRm-060-16 mmRm-060-30

mmRm-080-16 mmRm-080-25

mmRm-100-20 mmRm-100-25 mmRm-120-25


CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

OVERALLLENGTHL1, mm

MetriC eND MiLLS

2-FLUTETOOL NO.

6

6

6

6

6


1.90

2.90

3.80

4.80

5.80

71530

81530

91530

101530

111630

1625

202525

0.20

0.25

0.25

0.50

1.00

101012

8

101012

8

9.80 9.8011.80

7.80

727283

63

57

57

57

57

57

2

3

4

5

6

101012

8

1.001.001.50

1.00 33.15

39.0539.0562.45

25.65

25.65

25.65

25.65

25.65

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 2 to 3 mm +0.000 –0.014 mm 4 to 6 mm +0.000 –0.018 mm 8 to 10 mm +0.000 –0.022 mm 12 mm +0.000 –0.027 mmT.I.R. Maximum 0.012 mm

These highest precision end mills feature multiple corner radii and multiple neck length dimensions in a wide range of cutting diameters to provide the best available geometry for finishing cuts in mold making applications.


REDUCEDNECK

LENGTHL3, mm

CORNERRADIUSR, mm

136

Coated MMrM Series, Mold MakingCenter Cutting — 30° Helix

MetriC eND MiLLS

0.50.50.60.6

0.8

0.9

1.0

1.2

1.5

0.50.50.60.6

0.8

0.9

1.0

1.2

1.5

FLUTELENGTHL2, mm

CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

OVERALLLENGTHL1, mm

2-FLUTETOOL NO.

4

4

6

6

6

50

50

50

57

575775


CORNERRADIUSR, mm

0.480.480.580.58

0.78

0.88

0.95

1.15

1.45

510 512

512

51016

51016

6 811121520

71520

71525

0.10

0.10

0.10

0.10

0.15

4 50 0.05

AlTiNCOATED

PRICE EACH

mmRm-005-5x mmRm-005-10xmmRm-006-5x

mmRm-006-12x

mmRm-007-5x mmRm-007-12x

mmRm-008-5x mmRm-008-10x mmRm-008-16x


mmRm-010-6xmmRm-010-8x

mmRm-010-11x mmRm-010-12x mmRm-010-15x mmRm-010-20x



27.40

27.40

29.90

29.90

29.90

31.60


These highest precision end mills feature multiple corner radii and multiple neck length dimensions in a wide range of cutting diameters to provide the best available geometry for finish-ing cuts in mold making applications.


REDUCEDNECK

LENGTHL3, mm

0.7 4 0.68 50 0.7 0.10 31.60

137

Coated MMrM Series, Mold MakingCenter Cutting — 30° Helix

MetriC eND MiLLS

2

3

4

5

6

FLUTELENGTHL2, mm

CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

OVERALLLENGTHL1, mm

2-FLUTETOOL NO.

6

6

6

6

6


1.90

2.90

3.80

4.80

5.80

71530

81530

91530

101530

111630

1625

202525

0.20

0.25

0.25

0.50

1.00

101012

8

101012

8

9.80 9.8011.80

7.80

727283

63

57

57

57

57

57

2

3

4

5

6

101012

8

1.001.001.50

1.00

AlTiNCOATED

PRICE EACH






mmRm-080-16x mmRm-080-25x


39.50

45.5545.5574.20

29.90

29.90

29.90

29.90

29.90


These highest precision end mills feature multiple corner radii and multiple neck length dimensions in a wide range of cutting diameters to provide the best available geometry for finishing cuts in mold making applications.


CORNERRADIUSR, mm

REDUCEDNECK

LENGTHL3, mm

138


These highest precision finishing end mills are suitable for HSC applications and engineered for shrink-fit tool holding.

A positive rake angle supports maximum cutting performance in soft, medium, and hard mate-rials for conventional side milling and slotting.

SFrM Series, HSC Shrink FitCenter Cutting — 30° Helix

0.20.30.30.40.4

0.50.50.50.60.60.6

0.80.80.81.01.0

SFRm-002-0SFRm-003-0SFRm-003-1SFRm-004-0SFRm-004-1

SFRm-005-1SFRm-005-3SFRm-005-5SFRm-006-2SFRm-006-4SFRm-006-6

SFRm-008-2SFRm-008-5SFRm-008-8SFRm-010-3SFRm-010-8

0.30.40.40.50.5

0.60.50.50.70.60.6

1.00.80.81.31.3

39.8039.8039.8038.9038.90

37.0537.0538.9037.0537.0538.90

35.2035.2038.6033.5035.20


CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

OVERALLLENGTHL1, mm

MetriC eND MiLLS

2-FLUTETOOL NO.


0.25

0.35

0.450.450.450.550.550.55

0.750.750.750.950.95

1.0

1.2

1.63.35.11.74.56.2

2.55.28.03.38.0

6

6

6

57

57

57 0.1

0.1

CORNERRADIUSR, mm

REDUCEDNECK

LENGTHL3, mm

139

SFrM Series, HSC Shrink FitCenter Cutting — 30° Helix

1.21.21.41.4

1.51.51.61.61.8

2.02.02.52.5

3.03.03.54.04.0

5.05.06.06.0

SFRm-012-3SFRm-012-8SFRm-014-3

SFRm-014-15

SFRm-015-4SFRm-015-9SFRm-016-5

SFRm-016-22SFRm-018-5

SFRm-020-5SFRm-020-9SFRm-025-6SFRm-025-9

SFRm-030-8 SFRm-030-15SFRm-035-9

SFRm-040-10 SFRm-040-20

SFRm-050-11 SFRm-050-25 SFRm-060-12 SFRm-060-25

1.51.21.82.3

1.91.52.02.32.3

2.52.53.02.5

4.04.04.55.05.0

6.06.07.57.5

31.9033.6530.3031.90

30.3031.9030.3031.9030.30

28.8530.6028.8530.60

27.3529.4027.3527.3529.40

26.0027.6025.6527.60


CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

OVERALLLENGTHL1, mm

MetriC eND MiLLS

2-FLUTETOOL NO.


1.151.151.351.35

1.451.451.551.551.75

1.951.952.402.40

2.902.903.403.903.90

4.904.905.905.90

3.5 8.0 3.815.0

4.9 9.5 5.022.0 5.3

5.5 9.5 6.0 9.5

8.015.0 9.510.020.0

11.025.012.525.0

6

6

6

6

6

57

57

57

57

57

0.1

0.1

0.2

0.2

0.2




CORNERRADIUSR, mm

REDUCEDNECK

LENGTHL3, mm

140

Coated SFrM Series, HSC Shrink FitCenter Cutting — 30° Helix

MetriC eND MiLLS

0.20.30.30.40.4

0.50.50.50.60.60.6

0.80.80.81.01.0

0.30.40.40.50.5

0.60.50.50.70.60.6

1.00.80.81.31.3

44.4044.4044.4043.4543.45

41.5541.5543.4541.5541.5543.45

39.7039.7043.1037.9039.70

FLUTELENGTHL2, mm

CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

OVERALLLENGTHL1, mm

2-FLUTETOOL NO.


0.25

0.35

0.450.450.450.550.550.55

0.750.750.750.950.95

1.0

1.2

1.63.35.11.74.56.2

2.55.28.03.38.0

6

6

6

57

57

57 0.1

0.1

AlTiNCOATED

PRICE EACH

SFRm-002-0xSFRm-003-0xSFRm-003-1xSFRm-004-0xSFRm-004-1x

SFRm-005-1xSFRm-005-3xSFRm-005-5xSFRm-006-2xSFRm-006-4xSFRm-006-6x

SFRm-008-2xSFRm-008-5xSFRm-008-8xSFRm-010-3xSFRm-010-8x



A positive rake angle supports maximum cutting performance in soft, medium, and hard mate-rials for conventional side milling and slotting.

CORNERRADIUSR, mm

REDUCEDNECK

LENGTHL3, mm

141

Coated SFrM Series, HSC Shrink FitCenter Cutting — 30° Helix

MetriC eND MiLLS

1.21.21.41.4

1.51.51.61.61.8

2.02.02.52.5

3.03.03.54.04.0

5.05.06.06.0

1.51.21.82.3

1.91.52.02.32.3

2.52.53.02.5

4.04.04.55.05.0

6.06.07.57.5

36.2538.2036.2534.70

34.7036.2534.7036.2534.70

33.1535.0533.1535.05

31.7033.8031.7031.7033.80

30.4031.9529.9031.95

FLUTELENGTHL2, mm

CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

OVERALLLENGTHL1, mm

2-FLUTETOOL NO.


1.151.151.351.35

1.451.451.551.551.75

1.951.952.402.40

2.902.903.403.903.90

4.904.905.905.90

3.5 8.0 3.815.0

4.9 9.5 5.022.0 5.3

5.5 9.5 6.0 9.5

8.015.0 9.510.020.0

11.025.012.525.0

6

6

6

6

6

57

57

57

57

57

0.1

0.1

0.2

0.2

0.2

AlTiNCOATED

PRICE EACH

SFRm-012-3xSFRm-012-8xSFRm-014-3x

SFRm-014-15x

SFRm-015-4xSFRm-015-9xSFRm-016-5x

SFRm-016-22xSFRm-018-5x

SFRm-020-5xSFRm-020-9xSFRm-025-6xSFRm-025-9x

SFRm-030-8x SFRm-030-15xSFRm-035-9x

SFRm-040-10x SFRm-040-20x

SFRm-050-11x SFRm-050-25x SFRm-060-12x SFRm-060-25x




CORNERRADIUSR, mm

REDUCEDNECK

LENGTHL3, mm

142

AeMM Series, Universal Application Center Cutting — 30° Helix

MetriC eND MiLLS

2-FLUTETOOL NO.

3-FLUTETOOL NO.

AEmm-010-4AEmm-015-4AEmm-020-4AEmm-025-4





AEmm-200-4AEmm-250-4







4-FLUTETOOL NO.

CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

FLUTELENGTHL2, mm








1.0 1.5 2.0 2.5

3.0 3.5 4.0 4.5

5.0 5.5 6.0 7.0

8.0 9.010.011.0

12.014.016.018.0

20.025.0

4 4 5 6

8101111

16161622

22252530

30353545

4550

6 6 6 8

8101012

12141618

2025

4

6

57 57 57 63

63 72 72 83

83 83 92 92

104127

50

57

14.60

18.30

18.3018.3018.3022.70

22.7026.7526.7542.65

42.6549.5579.05

106.20

135.00160.55

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 1 to 3 mm +0.000 –0.014 mm 4 to 6 mm +0.000 –0.018 mm 7 to 10 mm +0.000 –0.036 mm 11 to 18 mm +0.000 –0.043 mm 20 mm +0.000 –0.052 mm 25 mm +0.000 –0.062 mmT.I.R. Maximum 0.012 mm

These universal application type end mills feature a slightly increased flute and overall length for greatest versatility.

The conventional tool geometry supports applications in a wide scope of different materials, ranging from soft to hard.

143

Coated AeMM Series, Universal Application Center Cutting — 30° Helix

MetriC eND MiLLS

2-FLUTETOOL NO.

3-FLUTETOOL NO.

AEmm-010-4xAEmm-015-4xAEmm-020-4xAEmm-025-4x





AEmm-200-4xAEmm-250-4x







4-FLUTETOOL NO.

CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

FLUTELENGTHL2, mm

OVERALLLENGTHL1, mm







1.0 1.5 2.0 2.5

3.0 3.5 4.0 4.5

5.0 5.5 6.0 7.0

8.0 9.010.011.0

12.014.016.018.0

20.025.0

4 4 5 6

8101111

16161622

22252530

30353545

4550

AlTiNCOATED

PRICE EACH

6 6 6 8

8101012

12141618

2025

4

6

57 57 57 63

63 72 72 83

83 83 92 92

104127

50

57

18.60

22.55

22.5522.5522.5528.85

38.8533.0033.0054.15

54.1560.7090.15

119.60

154.35180.00

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 1 to 3 mm +0.000 –0.014 mm 4 to 6 mm +0.000 –0.018 mm 7 to 10 mm +0.000 –0.036 mm 11 to 18 mm +0.000 –0.043 mm 20 mm +0.000 –0.052 mm 25 mm +0.000 –0.062 mmT.I.R. Maximum 0.012 mm


The conventional tool geometry supports applications in a wide scope of different materials, ranging from soft to hard.

144

Coated AeCM Series, Universal Application, with Corner radiusCenter Cutting — 30° Helix

MetriC eND MiLLS

2-FLUTETOOL NO.

3-FLUTETOOL NO.

AECm-0101-4xAECm-0102-4xAECm-0202-4xAECm-0205-4xAECm-0302-4xAECm-0305-4x








4-FLUTETOOL NO.

CUTTERDIA.

D1, mm

SHANKDIA.

D2, mm

FLUTELENGTHL2, mm

OVERALLLENGTHL1, mm





1 1 2 2 3 3

4 4 4 5 5 5

6 6 6 8 8 8

101010121212

4 4 5 5 8 8

111111161616

161622222225

252525303030

AlTiNCOATED

PRICE EACH

CORNERRADIUSR, mm

0.10.20.20.50.20.5

0.20.51.00.20.51.0

0.30.51.00.51.01.5

0.51.01.50.51.01.5

6 6 6 8 8 8

101010121212

4 4 4 4 6 6

6

575757636363

727272838383

505050505757

57

20.1020.1020.1020.1024.3524.35

24.35

24.3524.3524.3531.1531.1531.15

35.7035.7035.7058.5058.5058.50



Engineered with various corner radii per cutting diameter, the tools are ideally suited for heavier cuts in medium and hard materials.


145

Coated HMSM Series, Hard Milling, Stub LengthCenter Cutting

MetriC end MiLLS

hmsm-030-4xhmsm-040-4xhmsm-050-4xhmsm-060-4x

hmsm-080-4xhmsm-100-4xhmsm-120-4xhmsm-160-4xhmsm-200-4x

75 80100110125

4-FLUTETOOL NO.


shANKDIAmETERD2, mm

FLUTELENGThL2, mm

OVERALLLENGThL1, mm

3 4 5 6

810121620

810121620

4.5 6.0 7.5 9.0

12.015.018.024.030.0

49.3549.3553.1553.15

58.7566.8084.65

169.20233.00

AlTiNCOATED

PRICE EACh


Engineered with a special 4-flute stub length tool geometry, specifically suitable for milling operations with a shallow cutting depth in hard materials.

The unique tool geometry provides maximum mill-ing performance in finishing and semi-finishing as well as in roughing cuts.


6 57

146

Coated HMUM Series, Universal Hard MillingCenter Cutting

MetriC end MiLLS


Engineered with a negative rake angle, these high-tech end mills are specifically engineered for numerous milling applications in hard materials.

The unique tool geometry provides maximum milling performance in semi-finishing and rough-ing cuts.


hmUm-040-4xhmUm-060-4xhmUm-080-4xhmUm-100-4xhmUm-120-4xhmUm-160-4xhmUm-200-4x

57 57 75 80100110125

4-FLUTETOOL NO.


shANKDIAmETERD2, mm

FLUTELENGThL2, mm

OVERALLLENGThL1, mm

4 6 810121620

6 6 810121620

12152025304045

51.8555.8561.6070.0088.60

177.40244.20

AlTiNCOATED

PRICE EACh

L2

147

Coated HMrM Series, Hard Milling, High PerformanceCenter Cutting

MetriC end MiLLS

hmRm-030-4xhmRm-040-4xhmRm-050-4xhmRm-060-4x

hmRm-080-4xhmRm-100-4xhmRm-120-4xhmRm-160-4xhmRm-200-4x

75 80100110125

4-FLUTETOOL NO.


shANKDIAmETERD2, mm

FLUTELENGThL2, mm

OVERALLLENGThL1, mm

3 4 5 6

810121620

810121620

8111313

1922263238

51.8551.8555.8555.85

61.6070.0088.60

177.40244.20

AlTiNCOATED

PRICE EACh


These high performance end mills feature a special 4-flute geometry and are specifically engineered for numerous milling applications in hard materials.



6 57

L2

148

Coated HMCM Series, Hard Milling, with Corner radiusCenter Cutting

MetriC end MiLLS

hmCm-0302-4xhmCm-0305-4x

hmCm-0402-4xhmCm-0405-4xhmCm-0410-4x

hmCm-0502-4xhmCm-0505-4xhmCm-0510-4x

hmCm-0603-4xhmCm-0605-4xhmCm-0610-4xhmCm-0615-4x

hmCm-0803-4xhmCm-0805-4xhmCm-0810-4xhmCm-0815-4xhmCm-0820-4x

4-FLUTETOOL NO.


shANKDIAmETERD2, mm

FLUTELENGThL2, mm

OVERALLLENGThL1, mm

AlTiNCOATED

PRICE EACh

CORNERRADIUsR, mm

0.20.5

0.20.51.0

0.20.51.0

0.30.51.01.5

0.30.51.01.52.0

3

4

5

6

8

6

6

6

6

8

57

57

57

57

75

8

11

13

13

19

59.05

59.05

63.60

63.60

70.00

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 3 to 6 mm +0.000 –0.018 mm 8 mm +0.000 –0.022 mmT.I.R. Maximum 0.012 mm

Engineered with multiple corner radii per cutting diameter and a special 4-flute tool geometry, these high tech end mills are designed for hard material milling.

The various corner radii reduce cutting forces on the tip of the cutting edge and therefore support heavier cuts and longer tool life.



149

Coated HMCM Series, Hard Milling with Corner radiusCenter Cutting

MetriC end MiLLS





4-FLUTETOOL NO.


shANKDIAmETERD2, mm

FLUTELENGThL2, mm

OVERALLLENGThL1, mm

AlTiNCOATED

PRICE EACh0.51.01.52.0

0.51.01.52.0

1.01.52.03.0

1.01.52.03.0

10 10

12 12

16 16

20 20

80

100

110

125

26

22

38

32

79.50

100.35

202.35

276.90

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 10 mm +0.000 –0.022 mm 12 to 16 mm +0.000 –0.027 mm 20 mm +0.000 –0.033 mmT.I.R. Maximum 0.012 mm

Engineered with multiple corner radii per cutting diameter and a special 4-flute tool geometry, these high tech end mills are designed for hard material milling.

The various corner radii reduce cutting forces on the tip of the cutting edge and therefore support heavier cuts and longer tool life.



CORNERRADIUsR, mm

150

rnMM Series, HSC for Soft MaterialsCenter Cutting – 40° Helix

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 6 mm +0.000 –0.018 mm 8 to 10 mm +0.000 –0.022 mm 12 to 16 mm +0.000 –0.027 mm 20 mm +0.000 –0.033 mmT.I.R. Maximum 0.012 mm

These HSC end mills are specifically designed for semi-finishing and finishing cuts with highest cutting speeds in soft to medium–hard materials.

The unique tool geometries feature a high helix of 40°, a corner radius, and a reduced neck to ide-ally suit deep pocket milling with excellent material removal rates and optimized chip evacuation.

MetriC end MiLLS

RNmm-060-3RNmm-080-3RNmm-100-3RNmm-120-3RNmm-160-3

RNmm-200-4

6 810121620

6 810121620

6 810121620

66 81 90100120130

28.2051.4061.1579.55

124.20213.20

3-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIA.

D1, mm

shANKDIA.

D2, mm

FLUTELENGThL2, mm

OVERALLLENGThL1, mm PRICE EACh

CORNERRADIUsR, mm

REDUCEDNECKDIA.

D3, mm

REDUCEDNECK

LENGThL3, mm

5.6 7.6 9.611.615.619.6

304550557280

0.500.501.001.001.001.50

151

Coated rnMM Series, HSC for Soft MaterialsCenter Cutting – 40° Helix

MetriC end MiLLS

RNmm-060-3xRNmm-080-3xRNmm-100-3xRNmm-120-3xRNmm-160-3x

RNmm-200-4x

6 810121620

6 810121620

6 810121620

66 81 90100120130

32.5560.8070.8591.70

138.45237.85

3-FLUTETOOL NO.

4-FLUTETOOL NO.

CUTTERDIA.

D1, mm

shANKDIA.

D2, mm

FLUTELENGThL2, mm

OVERALLLENGThL1, mm

REDUCEDNECKDIA.

D3, mm

5.6 7.6 9.611.615.619.6

304550557280

0.500.501.001.001.001.50

AlTiNCOATED

PRICE EACh

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 6 mm +0.000 –0.018 mm 8 to 10 mm +0.000 –0.022 mm 12 to 16 mm +0.000 –0.027 mm 20 mm +0.000 –0.033 mmT.I.R. Maximum 0.012 mm

These HSC end mills are specifically designed for semi-finishing and finishing cuts with highest cutting speeds in soft to medium–hard materials.

The unique tool geometries feature a high helix of 40°, a corner radius, and a reduced neck to ide-ally suit deep pocket milling with excellent material removal rates and optimized chip evacuation.

CORNERRADIUsR, mm

REDUCEDNECK

LENGThL3, mm

152

rnrM Series, Mold MakingCenter Cutting – 45° Helix

MetriC end MiLLS

RNRm-305-4RNRm-405-4RNRm-505-4

RNRm-605-4RNRm-608-4RNRm-610-4RNRm-615-4

RNRm-805-6RNRm-810-6RNRm-815-6RNRm-820-6

RNRm-1005-6 RNRm-1010-6 RNRm-1015-6 RNRm-1020-6 RNRm-1025-6

RNRm-1210-6 RNRm-1215-6 RNRm-1220-6 RNRm-1230-6

4.5 6.0 7.5

4-FLUTETOOL NO.

6-FLUTETOOL NO.

CUTTERDIA.

D1, mm

shANKDIA.

D2, mm

FLUTELENGThL2, mm

OVERALLLENGThL1, mm PRICE EACh

REDUCEDNECKDIA.

D3, mm

2.75 3.70 4.60

12.013.515.0

0.5

0.50.81.01.5

0.51.01.52.0

0.51.01.52.02.5

1.01.52.03.0

3 4 5

6

8

10

12

6

6

8

10

12

57

66

75

75

83

5.50

7.50

9.25

11.00

9.0

10.0

12.0

12.0

24.0

28.0

30.0

32.0

42.25

90.50

72.80

54.20

43.75

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 3 to 6 mm +0.000 –0.018 mm 8 to 10 mm +0.000 –0.022 mm 12 mm +0.000 –0.027 mmT.I.R. Maximum 0.012 mm

These end mills feature an optimized tool geom-etry for the highest precision requirements in mold making. They are engineered with multiple corner radii per cutting diameter and a short 4- and 6-flute geometry with a high helix of 45° for optimal milling performance and longest tool life.

Ideally suited for semi-finishing and finishing cuts.

CORNERRADIUsR, mm

REDUCEDNECK

LENGThL3, mm

153

Coated rnrM Series, Mold MakingCenter Cutting – 45° Helix

MetriC end MiLLS

4.5 6.0 7.5

4-FLUTETOOL NO.

6-FLUTETOOL NO.

CUTTERDIA.

D1, mm

shANKDIA.

D2, mm

FLUTELENGThL2, mm

OVERALLLENGThL1, mm

REDUCEDNECKDIA.

D3, mm

2.75 3.70 4.60

12.013.515.0

0.5

0.50.81.01.5

0.51.01.52.0

0.51.01.52.02.5

1.01.52.03.0

3 4 5

6

8

10

12

6

6

8

10

12

57

66

75

75

83

5.50

7.50

9.25

11.00

9.0

10.0

12.0

12.0

24.0

28.0

30.0

32.0

AlTiNCOATED

PRICE EACh

RNRm-805-6xRNRm-810-6xRNRm-815-6xRNRm-820-6x

RNRm-1005-6x RNRm-1010-6x RNRm-1015-6x RNRm-1020-6x RNRm-1025-6x

RNRm-1210-6x RNRm-1215-6x RNRm-1220-6x RNRm-1230-6x

RNRm-305-4xRNRm-405-4xRNRm-505-4x

RNRm-605-4xRNRm-608-4xRNRm-610-4xRNRm-615-4x

46.95

102.85

79.95

60.95

48.45

Shank Dia. –0.0025 to –0.005 mmCutter Dia. 3 to 6 mm +0.000 –0.018 mm 8 to 10 mm +0.000 –0.022 mm 12 mm +0.000 –0.027 mmT.I.R. Maximum 0.012 mm

These end mills feature an optimized tool geom-etry for the highest precision requirements in mold making. They are engineered with multiple corner radii per cutting diameter and a short 4- and 6-flute geometry with a high helix of 45° for optimal milling performance and longest tool life.

Ideally suited for semi-finishing and finishing cuts.

CORNERRADIUsR, mm

REDUCEDNECK

LENGThL3, mm

154

tHreAd MiLLSShank Diameter –.0001 to –.0002”Cutter Diameter +.000 –.010”Overall Length ±1/32”

Designed for milling precision I.D. and O.D. threads in all types of steels, non-ferrous metals and exotic materials.

Equally effective in laminated plastics, fiberglass and composites used in the aircraft industry.

Thread form generated is American Standard thread.

Minimum pitch listed is for an internal thread.

Solid carbide cutter head brazed to solid carbide shank for maximum rigidity.

66.0580.45

102.90141.25

TOOLNUmBERTm-375 Tm-500 Tm-750 Tm-001

3/81/23/41

CUTTER DIA.D1

shANKDIA.D2

1/4 5/16

3/81/2

shANK LENGTh

L2-1/22-1/22-1/2

3

FLATF

.002 .0035 .0045

.009

NO.OF FLUTEs

4567

T.P.I.RANGE

12 – 3211 – 32 7 – 16 5 – 12

ALTiNCOATED

PRICE EA.ThICKNEss

T.093.125.156.187

COATEDTOOL

NUmBERTm-375x Tm-500x Tm-750x Tm-001x

60.7073.9591.75119.80

PRICEEACh

155

tHreAd MiLLSShank Diameter –.0001 to –.0002”Cutter Diameter +.000 –.010”Overall Length ±1/32”

Designed for milling precision I.D. and O.D. threads in all types of steels, non-ferrous metals and exotic materials.

Equally effective in laminated plastics, fiberglass and composites used in the aircraft industry.

Thread form generated is American Standard thread.

Minimum pitch listed is for an internal thread.

48.6048.6045.5545.5539.3539.3539.35

46.50

54.7054.7054.7054.7061.10

67.9567.9578.5078.5097.6097.60

112.15

TOOLNUmBERTm-060-4Tm-060-6Tm-080-4Tm-080-8Tm-100-6Tm-100-8

Tm-100-10

Tm-120-6Tm-120-8

Tm-120-10Tm-140-8

Tm-140-12

Tm-180-8 Tm-180-12 Tm-180-16 Tm-250-16 Tm-250-24

Tm-290-16 Tm-360-16 Tm-490-16 Tm-490-20 Tm-600-16 Tm-600-20

Tm-720-20 Tm-720-32 Tm-720-40

1/43/81/41/23/81/25/8

3/81/25/81/23/4

1/23/411

1-1/2

111

1-1/41

1-1/4

1-1/42

2-1/2

CUTTER DIA.D1

shANKDIA.D2

NECK LENGTh

L2

FLATF

.060

.060

.080

.080

.100

.100

.100

.120

.120

.120

.140

.140

.180

.180

.180

.250

.240

.290

.360

.490

.490

.600

.600

.720

.720

.720

NO.OF

FLUTEsT.P.I.

RANGEPRICEEACh

ThICK-NEss

T

OALL1

NECKDIA.D3

1/8

3/16

1-1/2

2

2-1/22-1/22-1/23-1/23-1/2

4

4

2

3

445566

6

4

.030

.030

.035

.035

.050

.050

.050

.070

.070

.070

.075

.075

.100

.100

.100

.100

.150

.190

.230

.300

.300

.420

.420

.420

1/41/41/41/4

5/16

3/83/81/21/25/85/8

3/4

.001

.002

.002

.002 .0035 .0035.004.004

.0045

56 – 8056 – 8040 – 6440 – 6432 – 6432 – 6432 – 64

32 – 5632 – 5632 – 5624 – 5624 – 56

18 – 5618 – 5618 – 5616 – 4816 – 48

14 – 4012 – 3211 – 3211 – 3210 – 3210 – 32

5 – 12

.032

.032

.032

.032

.045

.045

.060

.060

.060

.065

.065

.075

.085

.095

.095

.100

.100

.200

51.0051.0047.9547.9541.7541.7541.75

49.85

59.5559.5559.5559.5566.40

75.4075.4087.9587.95

108.20108.20

124.85

ALTINCOATEDPRICEEACh

COATEDTOOL

NUmBERTm-060-4xTm-060-6xTm-080-4xTm-080-8xTm-100-6xTm-100-8x

Tm-100-10x

Tm-120-6xTm-120-8x

Tm-120-10xTm-140-8x

Tm-140-12x

Tm-180-8x Tm-180-12x Tm-180-16x Tm-250-16x Tm-250-24x

Tm-290-16x Tm-360-16x Tm-490-16x Tm-490-20x Tm-600-16x Tm-600-20x

Tm-720-20x Tm-720-32x Tm-720-40x

156

tHreAd MiLLS

Shank Diameter –.0001 to –.0002”Cutter Diameter ±.0005”Length of Cut +.050 to .000”Overall Length ±.015”T.I.R. Maximum .0005”

Helical flute design for reduced cutting forces, smoother cuts, longest tool life, and maximum thread milling performance.

100% thread form; superior threads vs. tapping.

Cuts right hand and left hand high quality threads.

Suitable for all types of materials, especially heat treated and difficult to machine workpiece metals.

Uncoated thread mills are also available from stock.

Coated Helical Flute thread MillsUn threads

TOOLNUmBER

Tm-112-40xTm-138-32xTm-164-32xTm-190-24xTm-190-28xTm-190-32xTm-250-20xTm-250-28x

Tm-312-18xTm-312-24xTm-375-16xTm-375-24xTm-437-14xTm-437-20xTm-500-13xTm-562-12xTm-562-18x

Tm-625-11xTm-750-10xTm-750-12xTm-750-16xTm-875-09x Tm-875-14xTm-001-08x

1/4

CUTTERDIAmETER

D1

shANKDIAmETER

D2

.080

.100

.115

.120

.120

.120

.180

.180

.235

.235

.285

.285

.305

.335

.350

.370

.370

.470

.495

.495

.495

.620

.490

.620

OVERALLLENGTh

L1

4–40 6–32 8–3210–2410–2810–321/4–201/4–28

5/16–18 5/16–24

3/8–163/8–24

7/16–14 7/16–20

1/2–13 9/16–12 9/16–18

5/8–113/4–103/4–123/4–167/8– 97/8–141”– 8

FLUTEs

22333333

334444444

4

mINImUm ThREAD& PITCh

AlTiNCOATED

PRICE EACh

3/161/41/4

5/16 5/16 5/16

1/21/2

5/85/83/43/43/4 7/87/87/87/8

1-1/41-1/41-1/41-1/41-3/81-1/41-3/8

LENGThOF CUT

L2

222222

2-1/22-1/2

2-1/22-1/22-1/22-1/22-1/2

3333

4

1/41/4

5/16 5/16 5/16

3/83/83/83/8

1/21/21/21/25/81/25/8

For programming and technical assistance,go to www.micro100.com to downloadour “Thread Mill Auto Assist” program,

or call us to obtain your free disk.

140.30140.30140.30147.00147.00147.00154.70154.70

168.80168.80205.25205.25205.25215.25215.25215.25215.25

250.45250.45250.45250.45270.25250.45270.25

157

tHreAd MiLLS

Shank Diameter –.0001 to –.0002”Cutter Diameter ±.0005”Length of Cut +.050 to .000”Overall Length ±.015”T.I.R. Maximum .0005”






Coated Helical Flute thread MillsnPt & nPtF threads

169.40205.80212.80280.00

191.75218.80242.55318.70

TOOLNUmBER

Tm-27NPTxTm-18NPTxTm-14NPTxTm-11NPTx

Tm-27NPTFx Tm-18NPTFx Tm-14NPTFx Tm-11NPTFx

CUTTERDIAmETER

D1

shANKDIAmETER

D2

.245

.305

.495

.620

.245

.305

.495

.620

OVERALLLENGTh

L1

1/16 & 1/8 NpT1/4 & 3/8 NpT1/2 & 3/4 NpT1” & 2” NpT

1/16 & 1/8 NpTF1/4 & 3/8 NpTF1/2 & 3/4 NpTF1” & 2” NpTF

FLUTEs

3444

3444

mINImUm ThREAD

AlTiNCOATED

PRICE EACh

0.4370.6250.8751.125

0.4370.6250.8751.125

LENGThOF CUT

L2

2-1/22-1/2

44

2-1/22-1/2

44

1/4 5/16

1/25/8

1/4 5/16

1/25/8



PITCh

271814

11.5

271814

11.5

158

tHreAd MiLLS

Shank Diameter –0.0025 to 0.002 mmCutter Diameter 3.00 to 6.00 mm +0.000 –0.018 mm 7.62 to 9.40 mm +0.000 –0.022 mm 11.94 to 15.75 mm +0.000 –0.027 mmT.I.R. Maximum 0.012 mm






Coated Helical Flute thread MillsMetric threads



141.10141.10155.60194.95194.95

223.15229.95229.95243.40276.40276.40276.40324.50

TOOLNUmBER

Tmm-045075xTmm-050080xTmm-060100xTmm-080075xTmm-080125x

Tmm-100150xTmm-120100xTmm-120175xTmm-140150xTmm-160200xTmm-180150xTmm-200250xTmm-240300x


shANKDIAmETERD2, mm

3.00 3.00 4.30 6.00 6.00

7.62 9.15 9.15 9.4011.9411.9411.9415.75

OVERALLLENGThL1, mm

m4.5m5.0m6.0m8.0m8.0

m10.0m12.0m12.0m14.0m16.0m18.0m20.0m24.0

FLUTEs

3

mINImUm ThREAD

AlTiNCOATED

PRICE EACh

6 8121616

2022222232323235

LENGThOF CUTL2, mm

57

75100100100100100100100

6

810101012121216

PITCh,mm

0.750.801.000.751.25

1.501.001.751.502.001.502.503.00

4

159

diamond-Cut Fluting Pattern

RDB-10 RDB-20 RDB-30

RDB-40 RDB-50



1/16 3/321/8

3/16 3/16

1/41/41/4

5/163/81/2

OVERALL LENGTh

L1

PRICEEACh

shANKDIAmETER

D2

CUTTER DIAmETER

D1

FLUTE LENGTh

L2

1/8

3/161/4

1/4

5/163/81/2

11.30

16.1518.25

19.5020.8027.30

36.4048.3063.90

RDE-10 RDE-20 RDE-30

RDE-40 RDE-50



RDD-10 RDD-20 RDD-30

RDD-40 RDD-50



RDC-10 RDC-20 RDC-30

RDC-40 RDC-50



sTYLE ANO END CUT

9.50

13.4515.25

16.3517.4022.80

30.4040.3055.50

OVERALL LENGThL1

FLUTE LENGThL2

RDA-10 RDA-20 RDA-30

RDA-40 RDA-50



shANK DIAmETERD2

CUTTER DIAmETERD1 PRICE EACh

1/8

3/161/4

1/4

5/163/81/2

1/16 3/321/8

Ideal for routing printed circuit boards made from glass fibre, epoxy resin and composites used in the aircraft industry.

Equally effective for routing plastic and other non-metallic materials.

The diamond-cut fluting pattern provides smooth, rapid cutting and leaves a clean edge.

sTYLE BBURRTYpE

END CUT

sTYLE CEND mILL

TYpE END CUT

sTYLE E

FISHTAIL pOINT

rOUterS

Style A Shown

sTYLE D135°DRILL pOINT

5/163/81/2

3/16

1/42

2-1/23

2-1/22-1/2

3

1-1/2

2

3/163/81/2

3/43/41

5/8

1

22-1/2

3

2-1/22-1/2

3

1-1/2

2

3/163/81/2

5/8

3/43/41

1

160

Single Flute routers for Aluminum

TOOL NUmBER

22.3019.6519.6521.7521.75

26.2022.9522.9522.9522.9522.9522.9522.9522.9525.90

34.4057.0060.00

1-1/21-1/21-1/2

22

222222

2-1/22-1/22-1/2

3

3

OVERALL LENGThL1

1/41/41/21/25/8

1/41/41/25/81/25/83/43/83/4

1-1/4

1-1/81

1-1/2

FLUTE LENGThL2

sFA-062-22sFA-125-22sFA-125-24sFA-187-33sFA-187-35

sFA-062-42sFA-125-42sFA-125-44sFA-156-45sFA-187-44sFA-187-45sFA-218-46sFA-250-43sFA-250-46

sFA-250-410

sFA-375-69sFA-500-88

sFA-500-812

shANK DIAmETERD2

CUTTER DIAmETERD1 PRICE EACh

1/81/81/8

3/16 3/16

1/161/81/8

3/16 3/16

1/161/81/8

5/32 3/16 3/16 7/32

1/41/41/4

3/81/21/2

Shank Diameter –.0001 to –.0002”Cutter Diameter +.000 –.002”T.I.R. maximum .0005”

High speed, solid carbide routers for alumi-num and non-ferrous cutting applications.

Optimized rake and clearance angles produce highest material removal rates and improved surface finishes.

Innovative single flute end mill geometry avoids chip melting and chip re-welding problems.

Unique open flute design with polished, mirror-like flute finish.

rOUterS

1/4

3/81/21/2

161

Single Flute Routers for PlasticRight- & Left- Hand Spiral, Right-Hand Cut

right-handspiral

Tool No.

22.3019.6519.6521.7521.75

26.2022.9522.9522.9522.9522.9522.9522.9522.9525.90

34.4057.0060.00

1-1/21-1/21-1/2

22

222222

2-1/22-1/22-1/2

3

3

OVEralllEngth

l1

1/41/41/21/25/8

1/41/41/25/81/25/83/43/83/4

1-1/4

1-1/81

1-1/2

FlUtElEngth

l2

sFp-062-22sFp-125-22sFp-125-24sFp-187-33sFp-187-35

sFp-062-42sFp-125-42sFp-125-44sFp-156-45sFp-187-44sFp-187-45sFp-218-46sFp-250-43sFp-250-46

sFp-250-410

sFp-375-69sFp-500-88

sFp-500-812

shanKdiaMEtEr

D2

CUttErdiaMEtEr

D1 priCE EaCh1/81/81/8

3/16 3/16

1/161/81/8

3/16 3/16

1/161/81/8

5/32 3/16 3/16 7/32

1/41/41/4

3/81/21/2

Shank Diameter –.0001 to –.0002”Cutter Diameter +.000 –.002”T.I.R. Maximum .0005”

High speed, solid carbide routers for plastic and composite materials.

optimized rake and clearance angles produce highest material removal rates and improved surface finishes.

Innovative “o” flute design avoids chip melting and chip re-welding problems and evacuates chips efficiently.

open flute geometry with polished, mirror-like flute finish.

left-hand spiral routers are ideal for driving chips downward and when cutting forces on multi-layer workpieces require a down-cut operation.

ROUTERS

1/4

3/81/21/2

sFl-062-22sFl-125-22sFl-125-24sFl-187-33sFl-187-35

sFl-062-42sFl-125-42sFl-125-44sFl-156-45sFl-187-44sFl-187-45sFl-218-46sFl-250-43sFl-250-46

sFl-250-410

sFl-375-69sFl-500-88

sFl-500-812

lEFt-handspiral

Tool No.

Right-hand spiral

Left-hand spiral

162

Split-End Engraving ToolsOne End Split — Relieved for Right-Hand Cut

Shank Diameter –.0001 to –.0002” finish groundSplit Tolerance +.001–.000” of tool centerOffset Point ±.001”

EngRaving TOOLS


Conical Point — 90° Included Angle; suitable for chamfering

Conical Point — 60° Included Angle

rtC-125-1rtC-187-1rtC-250-1rtC-312-1rtC-375-1rtC-500-1

1-1/22

2-1/22-1/22-1/2

3

3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2


100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99

QUantitY – priCE EaCh

tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y

1-1/22

2-1/22-1/22-1/2

3

3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y

rsC-125-1rsC-187-1rsC-250-1rsC-312-1rsC-375-1rsC-500-1

1-1/22

2-1/22-1/22-1/2

3

3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y

rnC-125-1rnC-187-1rnC-250-1rnC-312-1rnC-375-1rnC-500-1

.004

.004

.004

16.2019.2522.2532.9042.4062.55

14.9518.0021.0031.6541.1561.30

12.9516.0019.0029.6539.1559.30

11.9515.0018.0028.6538.1558.30

11.2014.2517.2527.9037.4057.55

16.2019.2522.2532.9042.4062.55

14.9518.0021.0031.6541.1561.30

12.9516.0019.0029.6539.1559.30

11.9515.0018.0028.6538.1558.30

11.2014.2517.2527.9037.4057.55

16.2019.2522.2532.9042.4062.55

14.9518.0021.0031.6541.1561.30

12.9516.0019.0029.6539.1559.30

11.9515.0018.0028.6538.1558.30

11.2014.2517.2527.9037.4057.55

163

Split-End Engraving ToolsTwo Ends Split — Relieved for Right-Hand Cut





EngRaving TOOLS


22

2-1/22-1/22-1/2

3

3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y


22

2-1/22-1/22-1/2

3

3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y


22

2-1/22-1/22-1/2

3

3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y


.004

.004

.004

19.5523.6027.9041.3553.0075.55

18.3022.3526.6540.1051.7574.30

16.3020.3524.6538.1049.7572.30

15.3019.3526.3537.1048.7571.30

14.5518.6022.9036.3548.0070.55

19.5523.6027.9041.3553.0075.55

18.3022.3526.6540.1051.7574.30

16.3020.3524.6538.1049.7572.30

15.3019.3523.6537.1048.7571.30

14.5518.6022.9036.3548.0070.55

19.5523.6027.9041.3553.0075.55

18.3022.3526.6540.1051.7574.30

16.3020.3524.6538.1049.7572.30

15.3019.3523.6537.1048.7571.30

14.5518.6022.9036.3548.0070.55

164

Split-End Engraving ToolsOne End Split — Relieved for Right-Hand Cut


EngRaving TOOLS




rtC-250-120rtC-250-130rtC-250-145rtC-250-160

2-1/21/4


100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y

.010

.015

.022

.030

rsC-250-120rsC-250-130rsC-250-145rsC-250-160

2-1/21/4

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y

.010

.015

.022

.030

rnC-250-120rnC-250-130rnC-250-145rnC-250-160

2-1/21/4

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y

.010

.015

.022

.030

22.25 21.00 19.00 18.00 17.25

22.25 21.00 19.00 18.00 17.25

22.25 21.00 19.00 18.00 17.25

1/2

3/8

3/8

165

Split-End Engraving ToolsTwo Ends Split — Relieved for Right-Hand Cut


EngRaving TOOLS




rtC-250-220rtC-250-230rtC-250-245rtC-250-260

2-1/2 1/21/4


100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y

.010

.015

.022

.030

rsC-250-220rsC-250-230rsC-250-245rsC-250-260

2-1/2 3/81/4

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y

.010

.015

.022

.030

rnC-250-220rnC-250-230rnC-250-245rnC-250-260

2-1/2 3/81/4

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y

.010

.015

.022

.030

27.90 26.65 24.65 23.65 22.90

27.90 26.65 24.65 23.65 22.90

27.90 26.65 24.65 23.65 22.90

166

Extended Length Split-End Engraving ToolsOne End Split — Relieved for Right-Hand Cut





EngRaving TOOLS


3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y


3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y


3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y


.004

.004

.004

18.1020.0027.7041.3553.7083.40

16.8518.7526.4540.1052.4582.15

14.8516.7524.4538.1050.4580.15

13.8515.7523.4537.1049.4579.15

13.1015.0022.7036.3548.7078.40

18.1020.0027.7041.3553.7083.40

16.8518.7526.4540.1025.4582.15

14.8516.7524.4538.1050.4580.15

13.8515.7523.4537.1049.4579.15

13.1015.0022.7036.3548.7078.40

18.1020.0027.7041.3553.7083.40

16.8518.7526.4540.1052.4582.15

14.8516.7524.4538.1050.4580.15

13.8515.7523.4537.1049.4579.15

13.1015.0022.7036.3548.7078.40

334444

334444

334444

167

Extended Length Split-End Engraving ToolsTwo Ends Split — Relieved for Right-Hand Cut





EngRaving TOOLS


3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y

.004


3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y


3/8 7/16

1/21/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

OFFsEtpOint

Y


.004

.004

22.4527.0035.9550.4065.0593.25

21.2025.7534.7049.1563.8092.00

19.2023.7532.7047.1561.8090.00

18.2022.7531.7046.1560.8089.00

17.4522.0030.9545.4060.0588.25

22.4527.0035.9550.4065.0593.25

21.2025.7534.7049.1563.8092.00

19.2023.7532.7047.1561.8090.00

18.2022.7531.7046.1560.8089.00

17.4522.0030.9545.4060.0588.25

22.4527.0035.9550.4065.0593.25

21.2025.7534.7049.1563.8092.00

19.2023.7532.7047.1561.8090.00

18.2022.7531.7046.1560.8089.00

17.4522.0030.9545.4060.0588.25

334444

334444

334444

168

rsF-125-1rsF-187-1rsF-250-1rsF-312-1rsF-375-1rsF-500-1

100 0rMOrE

OVErall lEngth

l1

1-1/22

2-1/22-1/22-1/2

3

split lEngth

l2 1 tO 5

shanKdiaMEtEr

D 6 tO 11 12 tO 47 48 tO 99

3/83/83/81/21/25/8

1/8 3/161/4

5/163/81/2


tOOlnUMBEr

diMEnsiOns

Split-End Radius ToolsFull Radius, Relieved for Right-Hand Cut

One End Split

Other sizes also available.

Other sizes also available.

Two Ends Split


22

2-1/22-1/22-1/2

3

3/83/83/81/21/25/8

1/8 3/161/4

5/163/81/2

RadiUS TOOLS

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

Shank Diameter –.0001 to –.0002” finish groundSplit Tolerance +.001–.000” of tool centerSplit Length in proportion to length of tool.

16.2019.5522.5033.3043.0063.45

14.9518.3021.2532.0541.7562.20

12.9516.3019.2530.0539.7560.20

11.9515.3018.2529.0538.7559.20

11.2014.5517.5028.3038.0058.45

20.1024.3529.0043.0055.2078.70

18.8523.1027.7541.7553.9577.45

16.8521.1025.7539.7551.9575.45

15.8520.1024.7538.7550.9574.45

15.1019.3524.0038.0050.2073.70

169


334444

3/83/83/81/21/25/8

1/8 3/161/4

5/163/81/2

Extended Length Split-End Radius ToolsFull Radius, Relieved for Right-Hand Cut

One End Split



Two Ends Split


334444

3/83/83/81/21/25/8

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

QUantitY – priCE EaChdiMEnsiOns

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99tOOl

nUMBEr

shanKdiaMEtEr

D

shanKdiaMEtEr

D

RadiUS TOOLS

Shank Diameter –.0001 to –.0002” finish groundSplit Tolerance +.001–.000” of tool center

18.1020.2027.8041.5053.9583.80

16.8518.9526.5540.2552.7082.55

14.8516.9824.5538.2550.7080.55

13.8515.9523.5537.2549.7079.55

13.1015.2022.8036.5048.9578.80

22.1525.2034.9551.0567.5095.90

20.9023.9533.7049.8066.2594.65

18.9021.9531.7047.8064.2592.65

17.9020.9530.7046.8063.2591.65

17.1520.2029.9546.0562.5090.90

170

Shank Diameter –.0001 to –.0002”Radius +.003 –.000”T.I.R. Maximum .0005”

die Sinking CuttersCenter Cutting — Single End — 14° included angle

diE SinkERS

19.4025.7527.2534.00

42.5549.5066.0078.80

priCE EaChdsC-125dsC-156dsC-187dsC-250

dsC-312dsC-375dsC-437dsC-500

.030

.040

.046

.062

.070

.093

.109

.125

radiUsR

shanK diaMEtErD

1/8 5/32 3/161/4

5/163/8

7/161/2

2-FlUtETool No.

OVErall lEngthl

1-1/222

2-1/2

2-1/22-1/22-1/2

3

171

Shank Diameter –.0001 to –.0002”Radius +.003 –.000”T.I.R. Maximum .0005”

Moldmaking Runner CuttersSingle End — 12° Helix

RUnnER CUTTERS

32.1532.1535.6535.65

43.3043.3045.5557.25

priCE EaChMrt-187-031Mrt-187-046Mrt-250-062Mrt-250-078

Mrt-312-093Mrt-312-109Mrt-375-125Mrt-500-156

1/32 3/64 1/16 5/64

3/32 7/64

1/8 5/32

radiUsR

shanK diaMEtErD

3/16 3/16

1/41/4

5/16 5/16

3/81/2

2-FlUtETool No.

OVErall lEngthl1

22

2-1/22-1/2

2-1/22-1/22-1/2

3

FlUtE lEngthl2

.383

.308

.414

.338

.437

.366

.468

.675

10° Runner Cutter — 20° Included Angle

priCE EaChMrF-187-031MrF-187-046MrF-250-062MrF-250-078

MrF-312-093MrF-312-109MrF-375-125MrF-500-156

1/32 3/64 1/16 5/64

3/32 7/64

1/8 5/32

radiUsR

shanK diaMEtErD

3/16 3/16

1/41/4

5/16 5/16

3/81/2

2-FlUtETool No.

OVErall lEngthl1

22

2-1/22-1/2

2-1/22-1/22-1/2

3

.262

.216

.287

.243

.313

.270

.341

.545

FlUtE lEngthl2

15° Runner Cutter — 30° Included Angle

32.1532.1535.6535.65

43.3043.3045.5557.25

172

dRiLLSJobber Length drills

118° included drill Point — 25° Spiral

dECiMal EQUiValEnt

.0312

.0469

.0625

.0781

.0938

.1094

.1250

.1406

.1562

.1719

.1875

.2031

.2188

.2344

.2500

.2656

.2812

.2969

.3125

.3281

.3438

.3594

.3750

.3906

.4062

.4219

.4375

.4531

.4688

.4844

.5000

1/32 3/64 1/16 5/64

3/32 7/641/8

9/64

5/3211/64 3/1613/64

7/3215/64

1/417/64

9/3219/64 5/1621/64

11/3223/64

3/825/64

13/3227/64 7/1629/64

15/3231/64

1/2

dr-031-2dr-046-2dr-062-2dr-078-2

dr-093-2dr-109-2dr-125-2dr-140-2

dr-156-2dr-171-2dr-187-2dr-203-2

dr-218-2dr-234-2dr-250-2dr-265-2

dr-281-2dr-296-2dr-312-2dr-328-2

dr-343-2dr-359-2dr-375-2dr-390-2

dr-406-2dr-421-2dr-437-2dr-453-2

dr-468-2dr-484-2dr-500-2

1-1/41-1/21-1/21-3/4

22-1/42-1/42-1/2

2-1/22-3/42-3/4

3

33-1/43-1/43-1/2

3-1/23-3/43-3/4

4

44-1/44-1/44-1/2

4-1/24-1/24-1/24-3/4

4-3/4

OVErall lEngthl1

9.7012.8013.1013.80

15.1516.6517.5519.60

21.7025.0025.9030.25

32.5036.2038.4041.25

44.4048.9051.0555.60

61.4567.2572.6582.55

91.70100.15108.20117.60

125.65130.20134.80

priCE EaChdrill diaMEtEr

D2-FlUtE

Tool No.FlUtE lEngth

l2

1/23/43/47/8

11-1/41-1/41-3/8

1-3/81-5/81-5/81-3/4

1-3/422

2-1/8

2-1/82-3/82-3/82-1/2

2-1/22-3/42-3/42-7/8

2-7/82-7/82-7/8

3

3

Shank Diameter –.0001 to –.0002”Drill Diameter +.000 –.0005”

173

dRiLLSSpotting and Centering drills

82°, 90°, 100°, 120° included drill Point

inClUdEddrill pOint

82° 90°100°120°

82° 90°100°120°

82° 90°100°120°

82° 90°100°120°

82° 90°100°120°

82° 90°100°120°

82° 90°100°120°

90°100°120°

spd-250-082spd-250-090spd-250-100spd-250-120

spd-312-082spd-312-090spd-312-100spd-312-120

spd-375-082spd-375-090spd-375-100spd-375-120

spd-437-082spd-437-090spd-437-100spd-437-120

spd-500-082spd-500-090spd-500-100spd-500-120

spd-625-082spd-625-090spd-625-100spd-625-120

spd-750-082spd-750-090spd-750-100spd-750-120

spd-001-090spd-001-100spd-001-120

OVErall lEngthl1 priCE EaCh

drill diaMEtErDtOOl nUMBEr

FlUtE lEngthl2


1/4

1

3/4

5/8

1/2

7/16

3/8

5/16

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

3/4

3/4

1

1

1

1-1/8

1-1/8

1-1/4

19.30

22.50

28.30

38.55

42.25

74.75

113.40

171.95

174

Spade drills118° included drill Point

10.8511.2011.5012.70

13.9016.1019.0521.80

27.1530.1534.5036.40

39.5541.7047.6050.95

.010

.012

.016

.020

.025

.028

.030

.035

.038

.040

.042

.046

.048

.050

.055

.060

WEB thiCKnEssT

sd-031sd-062sd-093sd-125

sd-156sd-187sd-218sd-250

sd-281sd-312sd-343sd-375

sd-406sd-437sd-468sd-500

OVErall lEngthl priCE EaCh

1/32 1/16 3/321/8

5/32 3/16 7/321/4

9/32 5/1611/32

3/8

13/32 7/1615/32

1/2

inClUdEd anglEOF FlUtEs

drill diaMEtErDtOOl nUMBEr

6°10°10°14°

16°16°18°18°

1-1/41-1/21-1/21-1/2

dRiLLS


2

2-1/2

2-1/2

18°

20° 20°21°22°

175

Combined drills & CountersinksStraight Flute — double End — 60° included Countersink


tOOl nUMBEr .025 1/32 3/64 5/64

7/641/8

3/16 7/32

18.9518.9518.9529.85

33.3544.6067.2086.15

1-1/21-1/21-1/21-7/8

22-1/82-3/4

3

1/81/81/8

3/16

1/4 5/16 7/16

1/2

dC-00 dC-01dC-1dC-2

dC-3dC-4dC-5dC-6

shanK diaMEtErD2

drill diaMEtErD1

OVErall lEngthl1 priCE EaCh

Combined drill & Countersink Set

dRiLLS

Set includes DC-1 through DC-6in fitted wood case.

sEt no. dC-0 $279.80

drill lEngthl2

1/32 1/32 3/64 5/64

7/641/8

3/16 7/32

176

rs-125-1rs-187-1rs-250-1rs-312-1rs-375-1rs-500-1

1-1/22

2-1/22-1/22-1/2

3

3/83/83/81/21/25/8

1/8 3/161/4

5/163/81/2

Split-End Blanks

One End Split

Two Ends Split

rs-125-2rs-187-2rs-250-2rs-312-2rs-375-2rs-500-2

22

2-1/22-1/22-1/2

3

3/83/83/81/21/25/8

1/8 3/161/4

5/163/81/2

BLankS

Half-Round Blanks


hr-125hr-187hr-250hr-312hr-375hr-500

1-1/22

2-1/22-1/22-1/2

3

1/8 3/161/4

5/163/81/2

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

100 0rMOrE

OVErall lEngth

l1

split lEngth

l2 1 tO 5 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

100 0rMOrE

OVErall lEngth

l 1 tO 5diaMEtEr

D 6 tO 11 12 tO 47 48 tO 99


tOOlnUMBEr

diMEnsiOns

shanKdiaMEtEr

D

shanKdiaMEtEr

D

Shank Diameter –.0001 to –.0002” finish groundSplit Tolerance +.001–.000” of tool centerSplit Length in proportion to length of tool.

14.3516.6519.6528.6036.5555.80

13.1015.4018.4027.3535.3054.55

11.1013.4016.4025.3533.3052.55

10.1012.4015.4024.3532.3051.55

9.3511.6514.6523.6031.5550.80

17.5520.4525.0536.5546.7569.10

16.3019.2023.8035.3045.5067.85

14.3017.2021.8033.3043.5065.85

13.3016.2020.8032.3042.5064.85

12.5515.4520.0531.5541.7564.10

16.0024.0030.1545.9059.6089.50

14.2522.2528.4044.1557.8587.75

13.7521.7527.9043.6557.3587.25

13.2521.2527.4043.1556.8586.75

13.0021.0027.1542.9056.6086.50

177

RS-125-13RS-187-13RS-250-14RS-312-14RS-375-14RS-500-14

334444

3/83/83/81/21/25/8

1/8 3/161/4

5/163/81/2

Extended Length Split-End Blanks

One End Split


Two Ends Split

RS-125-23RS-187-23RS-250-24RS-312-24RS-375-24RS-500-24

334444

3/83/83/81/21/25/8

1/8 3/161/4

5/163/81/2


100 0RMORE

OVERALL LENGTH

L1

SPLIT LENGTH

L2 1 TO 5 6 TO 11 12 TO 47 48 TO 99

QUANTITY – PRICE EACH

TOOLNUMBER

DIMENSIONS

100 0RMORE

OVERALL LENGTH

L1

SPLIT LENGTH

L2 1 TO 5 6 TO 11 12 TO 47 48 TO 99


TOOLNUMBER

DIMENSIONS

SHANkDIAMETER

D

SHANkDIAMETER

D

BLANKS

Shank Diameter –.0001 to –.0002” finish groundSplit Tolerance +.001–.000” of tool center

16.9019.7526.8037.5052.3581.20

15.6518.5025.5536.2551.1079.95

13.6516.5023.5534.2549.1077.95

12.6515.5022.5533.2548.1076.95

11.9014.7521.8032.5047.3576.20

20.4523.8533.1046.6564.4091.10

19.2022.6031.8545.4063.1589.85

17.2020.6029.8543.4061.1587.85

16.2019.6028.8542.4060.1586.85

15.4518.8528.1041.6559.4086.10

178

Round BlanksDiameter –.0001 to –.0002" finish ground

SR-062-1 SR-062-2 SR-062-3 SR-062-4 SR-062-6

SR-062-12

SR-093-1 SR-093-2 SR-093-3 SR-093-4 SR-093-6

SR-093-12

SR-125-1.5SR-125-2 SR-125-3 SR-125-4 SR-125-6

SR-125-12

SR-156-1.5SR-156-2 SR-156-3 SR-156-4 SR-156-6

SR-156-12

SR-187-1.5SR-187-2 SR-187-4 SR-187-6

SR-187-12

SR-250-2 SR-250-2.5

SR-250-3 SR-250-4 SR-250-6

SR-250-12

SR-312-2 SR-312-2.5

SR-312-4 SR-312-6

SR-312-12

1 2 3 4 612

1 2 3 4 612

1-1/2 2 3 4 612

1-1/2 2 3 4 612

1-1/2 2 4 612

2 2-1/2

3 4 612

2 2-1/2

4 612

TOOLNUMBER

QUANTITY – PRICE EACHDIMENSIONS

DIAMETERD

LENGTHL 1 TO 5 6 TO 11 12 TO 47 48 TO 99 100 OR MORE

BLANKS

1/16

3/32

1/8

5/32

3/16

1/4

5/16

5.156.256.407.559.9014.75

5.506.857.058.3511.0016.45

7.707.958.3510.0513.5521.20

9.059.5511.5513.3018.8026.65

10.5011.2516.0522.6537.05

13.4514.3017.2021.9532.8052.25

20.3522.0036.0050.0578.10

3.654.754.906.058.4013.25

4.005.355.556.859.5015.25

6.206.456.858.5512.0519.70

7.558.0510.0511.8017.3025.15

9.009.7514.5521.1535.55

11.9512.8015.7020.4531.0550.75

18.8520.5034.5048.5576.60

2.904.004.155.307.6512.50

3.254.604.806.108.7514.50

5.455.706.107.8011.3018.95

6.807.309.3011.0516.5524.40

8.259.0013.8020.4034.80

11.2012.0514.9519.7030.5550.00

18.1019.7533.7547.8075.85

2.403.503.654.807.1512.00

2.754.104.305.608.2514.00

4.955.205.607.3010.8018.45

6.306.808.8010.5516.0523.90

7.758.5013.3019.9034.30

10.7011.5514.4519.2030.0549.50

17.6019.2533.2547.3075.35

2.153.253.404.556.90

11.75

2.503.854.055.358.00

13.75

4.704.955.357.05

10.5518.20

6.056.558.55

10.3015.8023.65

7.508.25

13.0519.6534.05

10.4511.3014.2018.9529.8049.25

17.3519.0033.0047.0575.10

179

SR-375-2 SR-375-2.5

SR-375-4 SR-375-6

SR-375-12

SR-437-2.5SR-437-4 SR-437-6

SR-437-12

SR-500-2.5SR-500-3 SR-500-4 SR-500-6

SR-500-12

SR-562-3.5SR-562-4 SR-562-6

SR-562-12

SR-625-3.5SR-625-4 SR-625-6

SR-625-12

SR-687-4 SR-687-6

SR-687-12

SR-750-4 SR-750-6

SR-750-12

SR-875-4 SR-875-6

SR-875-12

SR-001-4 SR-001-5 SR-001-6

SR-001-12

2 2-1/2

4 612

2-1/2 4 612

2-1/2 3 4 612

3-1/2 4 612

3-1/2 4 612

4 612

4 612

4 612

4 5 612

TOOLNUMBER

QUANTITY – PRICE EACHDIMENSIONS

DIAMETERD

LENGTHL 1 TO 5 6 TO 11 12 TO 47 48 TO 99 100 OR MORE

Diameter –.0001 to –.0002” finish ground

Round Blanks

BLANKS

3/8

7/16

9/16

1/2

5/8

11/16

3/4

7/8

1

26.1529.0048.9068.40107.60

33.0064.7091.20144.00

36.7545.6578.30110.45174.80

77.60108.10153.05243.00

84.85113.10160.30254.70

116.05212.65338.25

117.45206.55328.60

155.85290.10462.30

195.20285.05323.20515.15

24.6527.5047.4066.90106.10

31.5063.2089.70142.50

35.2544.1576.80108.95173.50

76.10106.60151.55241.50

83.35111.60158.80253.20

114.30211.15336.75

115.95205.05327.10

154.35288.35460.80

193.70283.55321.70513.65

23.9026.7546.6566.15105.35

30.7562.4588.95141.75

34.5043.4076.05108.20172.55

75.35105.85150.80240.75

82.60110.85158.05252.45

113.80210.40336.00

115.20204.30326.35

153.60287.85460.05

192.95282.80320.95512.90

23.4026.2546.1565.65104.85

30.2561.9588.45141.25

34.0042.9075.55107.70172.05

74.85105.35150.30240.25

82.10110.35157.55251.95

113.30209.90335.50

114.70203.80325.85

153.10287.35459.55

192.45282.30320.45512.40

23.1526.0045.9065.40

104.60

30.0061.7088.20

141.00

33.7542.6575.30

107.45171.80

74.60105.10150.05240.00

81.85110.10157.30251.70

113.05209.65335.25

114.45203.55325.60

152.85287.10459.30

192.20282.05320.20512.15

180


STB-48

100 0R MORE

4.254.704.955.356.105.754.454.556.657.6511.606.858.159.3015.4016.00

3.503.755.555.959.30

3.554.505.055.356.359.2012.30

4.254.958.459.4511.75

4.005.358.15

4.255.50

3.703.95

71.6068.9536.5088.40114.00

7.80

5.255.705.956.357.106.755.455.557.658.6512.607.859.1510.3016.4017.00

4.504.756.556.9510.30

4.555.506.056.357.3510.2013.30

5.255.959.4510.4512.75

5.006.359.15

5.256.50

4.704.95

72.6069.9537.5089.40115.00

8.80

RL

1/43/43/83/81/23/41/4

5/163/41/25/8

7/161/25/85/83/4

1/4 5/16

1/25/83/4

5/163/81/21/21/25/83/4

3/81/21/25/83/4

3/85/83/4

3/47/8

3/413/16

66366

1

1/41/8

5/163/8

7/16 3/16 3/16 3/16

1/41/25/8

5/163/83/81/21/2

3/161/41/41/43/8

1/4 5/16

3/8 7/16

1/25/81

5/163/81/25/83/4

1/4 5/16

3/8

1/8 3/16

1/16 3/32

3/41/21/23/43/4

1/4

1/16 3/32 3/32 3/32 3/321/81/81/81/81/8

5/32 3/16 3/16 3/161/41/4

1/16 1/161/81/8

5/32

1/16 3/32 3/32 3/321/8

5/321/4

3/32 3/321/8

5/32 3/16

3/321/8

5/32

1/16 3/32

1/32 3/64

1/8 3/16 3/16 3/16

1/4

1/8

1025103510801090110511101113111411401200124012501270128013751380

20202030212021302230

5030508051005105520052405410

60806100620062406340

706071707230

RT-4RT-6

STB-12ASTB-13A

STB-424 STB-616

STB-616ASTB-624 STB-824

STB-48

TOOL NO.

3.503.954.204.605.355.003.703.805.906.9010.856.107.408.5514.6515.25

2.753.004.805.208.55

2.803.754.304.605.608.4511.55

3.504.207.708.7011.00

3.254.607.40

3.504.75

2.953.20

70.8568.2035.7587.65113.25

7.05

3.003.453.704.104.854.503.203.305.406.4010.355.606.908.0514.1514.75

2.252.504.304.708.05

2.303.253.804.105.10 7.9511.05

3.003.707.208.2010.50

2.754.106.90

3.004.25

2.452.70

70.3567.7035.2587.15112.75

6.55

2.502.953.203.604.354.002.702.804.905.909.855.106.407.55

13.6514.25

1.752.003.804.207.55

1.802.753.303.604.607.45

10.55

2.503.206.707.70

10.00

2.253.606.40

2.503.75

1.952.20

69.8567.2034.7586.65

112.25

6.05

2.252.702.953.354.103.752.452.554.655.659.604.856.157.30

13.4014.00

1.501.753.553.957.30

1.552.503.053.354.357.20

10.30

2.252.956.457.459.75

2.003.356.15

2.253.50

1.701.95

69.6066.9534.5086.40

112.00

5.80

SIZES

WT 1–5 6–11 12–23 24–47 48–99

1/8

1/64 1/64 1/64 1/32 1/32 1/32 1/32

1/4 5/16

1/4

Series 1000

Series 2000

Series 5000

Series 6000

Series 7000

Series RT

Series STB

BLANKS

181

7.457.457.857.85

I.C. B T R M

7.957.958.358.35

8.458.458.858.85

8.958.959.359.35

10.4510.4510.8510.85

.0660

.0614

.0715

.0669

1/641/321/641/32

1/8.1220.1137.1300.1217

.464

.4641/21/2

CPG-4621 CPG-4622

CPG-421 CPG-422

CPG

Diamond

Packaged in quantities of 10 per type

TP TD

Screw-On

1TO9

10TO99

100TO

249

250TO

499

500 TO

999

DIMENSIONSINSERT NUMBER

Positive Inserts, All Surfaces Ground

INdExABLE INSERTS

TP-41 TP-42 TP-61 TP-62

TD-6P-1TD-6P-2

6.856.858.458.45

7.357.358.958.95

7.857.859.459.45

9.359.3510.9510.95

4-404-406-326-32

R

.137

.137

.163

.163

H

.3590

.3440

.5465

.5315

.5465

.5315

B

1/41/43/83/8

I.C.

1/641/321/641/32

1/641/32

T

6.356.357.957.95

3/32 3/321/81/8

1TO9

10TO99

100TO

249

250TO

499

500 TO

999


SCREW SIZE

4.707.357.358.558.55

6.457.85

TPG-222TPG-321TPG-322TPG-432TPG-433

SPG-322SPG-422

7.7010.3510.3511.5511.55

9.4510.85

6.208.858.8510.0510.05

7.959.35

5.708.358.359.559.55

7.458.85

5.207.857.859.059.05

6.958.35

1/321/641/321/323/64

R

1/81/81/8

3/16 3/16

T

.3440

.5465

.5315

.7190

.7030

.0649

.0908

B

1/43/83/81/21/2

3/8 SQ.1/2 SQ.

I.C.

1TO9

10TO99

250TO

499

100TO

249

500 TO

999


TPG SPG

I.C. ±.001”Thickness ±.005”

1/8 1/32

3/8 1/8 .125 4-40 10.95 7.958.458.959.45

182

GRINDING Use diamond wheels with coolant whenever possible. Hold the tool against the wheel with relatively light pressure and remember to keep moving the tool constantly. Start with the top face always, and follow with the side-end reliefs, grinding the radius last. By following this sequence it is possible to obtain a better cutting edge inasmuch as minute flaking at the cutting edge is avoided. Lightly hone cutting edge with a hand hone after each grind. Depending on the

depth of cut; hone .001”-.003” for light cuts, and .004”-.006” for heavy cuts. Never cool the tool after grinding by quenching in water or oil. Let cool naturally.

BRAZING “Micro-grain” carbide, because of den-sity should be “sandwich-brazed”: A copper shim between two pieces of silver solder material. This will eliminate “stress-cracking” due to co-efficient of expansion.

BORING When boring and tools do not meet your expectations, simply grind 5-10 degrees positive top rake, radius nose .010” to .020” and lightly hone cutting edge.

BOX TURNING When turning hex or square stock, grind a land across the entire face of tool .020” to .025”. Be sure to lightly hone cutting edge after grind.

CUT-OFF Depending on material, often removing and breaking the chip becomes necessary. Here are chip-breaker recommendations: Land = 1 to 1-1/2 times the feed per revolution. Width = 3 to 4 times the feed per revolution. Depth = .010” to .015”. Always use as much feed rate as possible.

MILLING It is important to select the End Mill not only in the appropriate diameter for the job but to

HELPFUL HINTS:

also choose the correct size with the number of flutes most efficient for the milling operation performed. In general, the harder the workpiece, the higher the number of flutes should be selected; and the softer the material, the fewer, but wider flutes are required for better chip clearance. After each resharpening, the feather edge on the flutes should be removed with a fine grit hone to avoid chipping.

TURNING Rigidity of your set-up and starting your cut at centerline is of utmost importance. A side rake angle of 15 degrees is desirable, and 30-45 degrees for your side cutting edge angles will dis-tribute the cutting force and improve tool life. For heavy interrupted cuts or forgings, use as large a nose radius as possible. For light finishing cuts, grind a 45 degree land .010” deep across the nose, or radius .015”-.020”. All chip breakers should have a radius, equal to depth at rear.

APPLICATIONMICRO 100 is a “space age,” micro-grain carbide developed for machining high-strength, thermal resistant alloys. The following is a partial list of materials MICRO 100 is best suited for: ALUMINUM • BRASS • BRONZE • COBALT • HASTALLOY • HIGH SPEED STEEL • “M” Series HIGH SPEED STEEL • INCONEL • MARAGING ALLOYS • MOLYB-DENUM • RENE 41, 80 & 95 • STAINLESS STEELS (Precipitation – hardening) • SUPER ALLOYS (Iron & Nickel base) • TUNGSTEN • TITANIUM • WASPALLOY • ZIRCONIUM.

183

Aluminum/Aluminum AlloysBrass/BronzeCopper/Copper Alloys

Cast Iron, SoftCast Iron, HardDuctile IronMalleable Iron

Magnesium/Magnesium AlloysMonel/High Nickel SteelNickel Base Hi-Temp. Alloys

PlasticsPlastics, Glass FilledRefractory Alloys

Steel, Low CarbonSteel, Medium CarbonSteel, HardenedStainless Steel, SoftStainless Steel, Hard

Titanium, SoftTitanium, Hard

.0005.001.001

.001 .0004 .0005 .0005

.001 .0005 .0004

.0015 .0015 .0005

.0005 .0006 .0002 .0005 .0002

.0005 .0003

.002

.002

.002

.002 .0008

.001

.001

.002

.001 .0008

.003

.003

.001

.001 .0015 .0005

.001 .0005

.001 .0005

900-1500 400- 750 450- 850

300- 750 125- 350 150- 450 300- 550

1100-1600 225- 350 50- 125

900-1800 400-1000 125- 350

300- 600 150- 450 50- 225 250- 500 75- 275

175- 400 75- 250

1/8”

END MILL DIAMETER/Feed Per Tooth [inches]

MATERIALSPEED[SFM] 1/4” 1/2” 3/4” 1”

.008

.005

.006

.008

.004

.006

.007

.010

.004

.002

.015

.012

.002

.007

.005

.003

.006

.005

.006

.004

.005

.004

.004

.006

.003

.004

.005

.006

.003

.001

.010

.006 .0015

.005

.004

.002

.004

.003

.004

.002

.004

.003

.002

.003

.002

.002

.003

.004

.002

.001

.006

.004

.001

.003

.002

.001

.002

.001

.002

.001

SPEEdS & FEEdSEnd Mill Speed & Feed

Recommendations

Note: The recommendations listed below should be considered only as a starting point. To achieve optimum results, variations may be necessary.

For Lighter radiaL depth oF cutHigher range of recommended surface speeds should be used.

For greater radiaL depth oF cutLower range of recommended surface speeds should be used.

For SLotting appLicationSSpeeds should be reduced to approximately 80% of the heavy cut value for theparticular material being machined.

axiaL depth oF cutThese recommendations are for axial depths of cuts not to exceed 1-1/2 times the cutter diameter.

184

Micro-Grain carbide +Plus !

Metric Tools Catalog

FREE on request.

Mic

ro

100 cA

TALo

G 128 M

icr

o 100

INTERNATIONALLY ACCLAIMED

CATALOG

128

WILL NOT CHIP OR BREAK UNDER NORMAL MACHINING CONDITIONS

MICRO 100TOOL CORPORATION1410 E. Pine Avenue • Meridian, ID 83642208/888-7310 800/421-8065

FAX 208/888-2106www.micro100.com | [email protected]

CATALOG

128

MADE iN USA

©2008

micro 100 catalog

Documents

fitted wood case

pine avenue meridian

highest dimensional accuracy

exceptional surface finish

recommended surface speeds

highest precision requirements

high temperature alloys

metric special selection