1300 768 468 | info@microcote.com.au

FOR FLOOR SAFETYmicrocote HPU

Microcote HPU is a high performance protective coating and wear surface that can be applied to many different substrates to improve floor friction for safety and compliance.

»» Suitable for high traffic areas, wet areas, kitchens and manufacturing plants

»» Internal and external applications in clear or colour

»» Environmentally friendly solvent-free, very low VOC and virtually odourless

Improving floor safetyMicrocote HPU with Griplok™ additives can improve floor friction on most substrates for safety and compliance.

»» Options for slip ratings from P3–P5

»» Mix in additives for one coat application

»» Suitable for concrete, vinyl, ceramics, stone, steel, timber and more

»» Can be cleaned by scrubbing or pressure washing (refer Microcote HPU Cleaning and Maintenance Guide)

BEFORE AFTER

Ceramic tile and grout restoration with Microcote HPU Gloss.

www.microcote.com.au

Safety zones, line marking and wayfaring

Microcote HPU has standard yellow, red and white colours (custom colours available) designed for one coat application over many substrates.

»» With or without Griplok™ additives

»» Ideal for critical areas where downtime and odour are a factor

»» Suitable for wet areas, kitchens and manufacturing

»» More durable than anti-slip and line marking tapes

Microcote Griplok™ additives

Griplok™ additives have been selected for their durability and ability to achieve slip standards for compliance.

»» Griplok™»Standard is recommended for smooth and lightly textured surfaces, internal and external applications. Up to P5 slip rating. Typically one coat.

»» Griplok™»Max is recommended for wet and greasy areas, ramps and kitchens where P5 slip rating is required. Two coat system with Griplok™ Max in base coat and lock coat over the top.

»» Griplok™»Gloss is recommended for gloss applications where up to P3 slip rating is required while maintaining a full gloss finish

BEFORE AFTER

One coat Microcote HPU Yellow installed over a pebbled epoxy.

Disclaimer: The information provided in this document is for information purposes and individual conditions and legislative requirements should be assessed to determine whether Microcote HPU is appropriate. BioSurfaces Pty Ltd makes no general guarantee as to slip ratings or wear performance.