miele dishwasher g7856

Operating instructions

Commercial dishwasherG 7856

To avoid the risk of accidents ordamage to the machine it isessential to read these operating instructionsbefore it is installed, commissioned and used for thefirst time.

G i

M.-Nr. 05 234 501

Description of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Guide to the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Opening and closing the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Setting the water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Filling the salt reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Salt indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Loading the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Loading the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Adjusting the top basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Items not suitable for dishwashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Adding rinsing agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Setting the dosage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Adding cleaning agent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Starting a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Changing a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Selecting an additional function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Programme sequence indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Switching off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31To cancel a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Programming special functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Correcting minor faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Customer service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Electrical connection U.K.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Contents

2

This Miele machine is a front-loadingcommercial dishwasher, with very shortbatch times. It is especially suitable foruse in cafes, fast food outlets,restaurants, guest houses etc.It operates on the freshwater systemand is equipped with a water softeneras standard.

Description of the machine

3

a On/Off button (I-0)

b Door release button

c Display

d Delay start indicator light (seeProgramming special functions)

e Drying indicator light

f Programme start indicator light

g Start button

h Drying button

i Button to toggle between the currenttemperature and elapsed time in thedisplay

j Optical interface( for Service Technician use only)

k Add liquid cleaning agent indicatorlight (only applies to machine fittedwith an optional external DOSmodule)

l Add rinsing agent indicator light

m Add salt indicator light

n Check water inlet/outlet indicatorlight

o Programme sequence indicators

p Programme selector

Guide to the machine

4

a Connection for DOS module(optional dispenser pump for liquidcleaning agent) at the rear of themachine

b Filter combination

c Salt reservoir(for the water softener)

d Dispenser for powder cleaning agent

e Rinsing agent reservoir(with dosage selector)

Guide to the machine

5

This machine complies with allrelevant local and national safetyrequirements. Incorrect use can leadto personal injury and damage toproperty.Read the operating instructionscarefully before starting to use thismachine. This way you will avoid therisk of accidents and damage to themachine.Keep these instructions in a safeplace for reference, and pass themon to any future user.

Correct use

This machine is designed forcommercial use only, as described

in these Operating Instructions.Alterations to the machine, or using itfor purposes other than those for whichit was designed, are unauthorised andcould cause harm. The manufacturercannot be held liable for damagecaused by improper or incorrect use ofthe machine.

This equipment may only beinstalled in mobile installations

such as ships, oil rigs etc. if a riskassessment of the installation has beencarried out by a suitably qualifiedengineer.

Please pay attention to the followingnotes to avoid injury and damage.

This machine should becommissioned and then maintained

by a Miele authorised and trained ser-vice technician or other suitably qualifiedand competent approved person.Repairs and other work by unqualifiedpersons could be dangerous.

Do not install the machine in anarea where there is any danger of

explosion or of freezing conditions.

The electrical safety of thismachine can only be guaranteed if

connected to a correctly installedearthing system on site. It is imperativethat this basic safety requirement istested regularly and, where there is anydoubt, the electrical wiring system onsite should be inspected by a qualifiedelectrician.The manufacturer cannot be held liablefor damage or injury caused by the lackof or inadequacy of an effectiveearthing system (e.g. electric shock).

A damaged machine is dangerous.Switch off at the mains immediately

and call the Miele Service Departmentor an authorised and trained Miele Ser-vice Dealer or other suitably qualifiedand competent approved person.

Warning and Safety instructions

6

Personnel operating the machineshould be trained regularly.

Untrained personnel should not beallowed access to the machine or itscontrols.

This machine is not a toy! Do notallow children to play in or around

it, or to operate it. There is a dangerthey could injure themselves, or get intothe machine and lock themselves in.

Take great care when handlingliquid agents and additives. These

may contain irritant or corrosiveingredients. Do not use organicsolvents as these could cause anexplosion.Follow all relevant safety procedurescarefully. Wear protective gloves andgoggles. With all chemical agents, themanufacturer’s safety conditions mustbe observed.

Avoid inhalation of powdercleaners. They can cause burning

in the mouth and throat if swallowed,and can inhibit breathing.

The water in the machine must notbe used as drinking water.

Do not sit or lean on an open door.The machine could tip up and be

damaged, or cause an injury.

Be careful when sorting items withsharp pointed ends and

positioning them in the machine thatyou do not hurt yourself or create adanger for others. Sharp knives etc.should be placed in the baskets withthe pointed end facing downwards.

When using this machine in thehigher temperature ranges be

especially careful not to scald or burnyourself when opening the door.Baskets and inserts must be allowed tocool down before they are unloaded.Any water remaining in containerscould still be very hot. Empty them intothe wash cabinet before taking themout.

Do not touch the heating elementsif you open the door during or

directly after the end of a programme:you could burn yourself. They remainhot for some time after the end of theprogramme.

Never clean the machine or nearvicinity with a water hose or a high

pressure hose.

Before any maintenance or repairwork is carried out, the machine

must be disconnected from the mainssupply by switching off at the mainsisolator or withdrawing the mains fuse.

The following points should beobserved to assist in maintainingquality standards, to protect users,and to avoid damage to the machineand items being cleaned.

Only use Miele approved cleaningagents in this machine. Use of

unsuitable cleaning agents couldadversely affect the components of themachine as well as items beingcleaned.

Foam can have an adverse effecton the cleaning process. Only use

low-foaming cleaning agents whichhave been approved by Miele. Sometypes of soiling can also cause foamingto occur.


7

Where a chemical additive isrecommended on technical

application grounds (e.g. a cleaningagent), this does not imply that themanufacturer of the machine acceptsliability for the effect of the chemical onthe items being cleaned.Please be aware that changes informulation, storage conditions etc.which may not be publicised by thechemical manufacturer, can have anegative effect on the cleaning result.

When using cleaning agents andspecial application products, it is

essential that the manufacturer’sinstructions are followed. Only use suchproducts for the purpose and in thesituation specifed to avoid suchdangers as chemical reactions andmaterial damage.

The machine is designed foroperation with water and additive

cleaning agents only. Organic solventsmust not be used in this machine, asthere is the danger under certaincircumstances of fire or explosion.(Although this is not the case with allorganic solvents, other problems couldarise with their use, for exampledamage to rubber and syntheticmaterials).

In critical applications where verystringent requirements have to be

met, it is strongly recommended that allthe relevant factors for the process,such as cleaning agents, water qualityetc., are discussed with the MieleApplication Technology specialists.

If cleaning and rinsing results aresubject to particularly stringent

requirements (e.g. chemical analysis,specialised industrial processes etc.), aregular quality control test must becarried out by the user to ensure thatrequired standards of cleanliness arebeing achieved.

The special inserts should only beused for their specific application.

Empty any containers or utensilsbefore arranging them in the

machine.

Do not allow any remains of acidsor solvents, and in particular

hydrochloric acid or chloride solutions,to get into the wash cabinet. Similarlyavoid any materials with a corrosiveeffect.The presence of solvents exceedingtrace levels should not be present insoiling (especially those in hazard classA1).

To avoid any corrosion damage,ensure that solutions or steam

containing hydrochloric acid do notcome into contact with the steel outercasing of the machine.

Please follow the advice oninstallation in these instructions

and the separate InstallationInstructions.


8

Using accessories

Only use genuine Mieleaccessories with this machine.

Consult Miele on the type andapplication of such equipment.

Disposal of your old machine

Before disposing of your oldmachine first make it unusable.

Disconnect from the mains, cut off thecable near the machine and any plugfrom the cable.For environmental and safety reasonsensure the machine is completelydrained of any residual water andcleaning agent. (Observe safetyregulations and wear safety gogglesand gloves).Make the door lock inoperative, so thatchildren cannot accidentally shutthemselves in. Then make appropriatearrangements for the safe disposal ofthe machine.

The manufacturer cannot be heldliable for damage caused bynon-compliance with these Warningand Safety instructions.


9

Disposal of the packingmaterialThe transport and protective packinghas been selected from materials whichare environmentally friendly for disposaland can normally be recycled.

Ensure that any plastic wrappings,bags etc. are disposed of safely andkept out of the reach of babies andyoung children. Danger of suffocation.

Rather than just throwing thesematerials away, please ensure that theyare recycled.

Disposal of your old applianceor machineElectrical and electronic appliances /machines often contain materialswhich, if handled or disposed ofincorrectly, could be potentiallyhazardous to human health and to theenvironment. They are, however,essential for the correct functioning ofyour appliance or machine. Please donot therefore dispose of your oldmachine or appliance with yourhousehold waste.

Please dispose of it at your localcommunity waste collection / recyclingcentre and ensure that it presents nodanger to children while being storedfor disposal.

It should be unplugged or disconnectedfrom the mains electricity supply by acompetent person. The plug must berendered useless and the cable cut offdirectly behind it to prevent misuse.See the "Warning and Safety" section ofthis booklet for further details.

Caring for the environment

10

Before using for the first time pleasepay special attention to the followingpoints.

Detailed information on these pointscan be found in the relevant sections ofthese Operating Instructions.

Set the water softener unit

The water softener unit must be set forthe water hardness level in your area.

The salt reservoir also has to be filled,first with water and then withreactivation salt.

,Filling the salt reservoir withcleaning agent by mistake will causeserious damage to the watersoftener. Please check every timebefore refilling that the packagecontains reactivation salt.

Add rinsing agent

,Inadvertently filling the reservoirfor rinsing agent with cleaning agent(including liquid cleaning agentsand washing up liquid) will causeserious damage to the reservoir.

Only use designated cleaning agentsfor special applications.

Do not use cleaning agents formulatedfor use in domestic dishwashers.

Load the machine carefully

Arrange the load so that water willcome into contact with all surfaces.Concealed surfaces will not becleaned.The spray arms must not be blocked byany items.

Add cleaning agent

Follow the cleaning agentmanufacturer’s recommendations ondosage.

The amount required will depend on thetype of cleaning agent and theprogramme chosen.Make sure you read the notes ondosing given in the programme chart.

Cleaning results may vary from brandto brand. If you are not satisfied withthe results from one brand, try anotherquality brand before contacting Mielefor advice.

The filter combination at the base ofthe wash cabinet and the spray armsmust be kept clean.

Regular checking and cleaning isessential.

Before using for the first time

11

To open the door a

^ Press the door button in as far as itwill go, and at the same time, grip thehandle and open the door.

The door should only be opened duringoperation for emergencies, e.g. ifarticles are knocking together or if aprogramme fault is indicated in thedisplay (see "Cancelling aprogramme").

,Do not touch the heatingelements if you open the door duringor directly after the end of aprogramme: you could burnyourself. The elements remain hot forsome time after the end of theprogramme.

With the J (SUPER SHORT)programme the door must be keptclosed between batches because ofthe build-up in the machine ofcondensed water (it could otherwisecause corrosion or damage tosurrounding furniture. See advice in theInstallation section).

To close the door^ Lift the door upwards and push until

it clicks shut. Do not press the doorrelease button whilst shutting thedoor.

Opening and closing the door

12

The water needs to be softened toavoid calcium deposits building up onutensils and in the machine itself.

To ensure a steady supply of soft water,the water softener unit must always be:

1. correctly programmed and

2. the salt reservoir must be filled.If the water hardness level is below 4°d - German scale (0.7 mmol/l), thereservoir does not need to be filledwith reactivation salt.

The machine is set at the factory for awater hardness level of 19 °d (3.4mmol/l).

If the water supply is harder or softerthan this (including below 4 °d or 0.7mmol/l), the factory setting will needto be changed following theinstructions in Setting the watersoftener. See chart on the next pagefor settings.

Your local water authority will adviseyou on the water hardness in your area.

For fluctuating levels e.g. 8 - 17 °d (1.4- 3.1 mmol/l) set the water softener tothe highest setting. In this example to17 °d (3.1 mmol/l).

ImportantThe built-in water softener has settingsfrom 1 °d - 60 °d (0.2 - 10.8 mmol/l).

For future servicing it is useful to makea note of your water hardness level.

^ Enter your water hardness level here:°d / mmol/l

Water softener

13

Table of settings

°d(German

scale)

mmol/l °f Setting

123456789

101112131415161718192021222324252627282930313233343536373839404142434445

0.20.40.50.70.91.11.31.41.61.82.02.22.32.52.72.93.13.23.43.63.84.04.14.34.54.74.95.05.25.45.65.85.96.16.36.56.76.87.07.27.47.67.77.98.1

2457911131416182022232527293132343638404143454749505254565859616365676870727476777981

12345678910111213141516171819 *)2021222324252627282930313233343536 **)373839404142434445

°d /mmol/l

mmol/l °f Setting

464748495051525354555657585960

8.38.58.68.89.09.29.49.59.79.910.110.310.410.610.8

83858688909294959799101103104106108

464748495051525354555657585960

*) factory setting**) 1-36 only for U.K.

Machines without a water softenerare set to 0 at the factory. Thissetting of 0 must not be changed onthese machines.

Water softener

14

Setting the water softener^ Switch the machine off.

^ Turn the programme selector to theSTOP position f.

^ Press 4 and 6 at the same time,hold them in and, whilst doing so,switch the machine on with the I-0button.The current programme status "P..."will show in the display.The indicator light p / 6 will comeon.

^ Press 3 once. E01 for programminglevel 1 will appear in the display.

^ Turn the programme selector sixswitch positions clockwise (6 o’clockposition).The number 19 will appear in thedisplay (the factory water hardnesssetting in °d, equivalent to 3.4mmol/l).

^ Press 4 as many times as isnecessary, or hold it in until therequired value (hardness level in °d)appears in the display.Once the number 60 (36 only forU.K.) has been reached, the counterwill begin again at 0.

^ Press the 6 button. SP appears.

^ Press 6 again. The setting will nowbe stored in the memory. The displayclears.

^ The machine is now ready foroperation.

Water softener

15

Filling the salt reservoirPlease only use special coarse grainedreactivation salt with granules ofapprox. 1-4 mm. Do not use other typesof salt, e.g. table salt, agricultural orgritting salt. These could containcomponents which are insoluble in wa-ter which could result in damage to thewater softener. If in doubt consult yourMiele Professional Department.

The salt reservoir holds approx. 2.5 kgof salt.

,Inadvertently filling the saltreservoir with cleaning agent willdamage the water softener.Before filling the salt reservoir makesure that you have picked up theright packet of reactivation salt.

^ Remove the bottom basket from themachine.

^ Unscrew the salt reservoir cap.

Before filling the salt reservoir withreactivation salt for the first time, fill itwith approx. 2.5 litres of water.

^ Place the funnel provided in place.

^ Fill carefully with salt. As it is filled,displaced water will run out).

^ Wipe any residual salt off the screwthreads on the socket.

^ Screw the cap on firmly.

^ Immediately after this: Run thePRE-RINSE programme D to removeany traces of salt from the cabinet.

Important: If after starting thePRE-RINSE programme D the machinedoes not start for a few minutes this isnot a fault. The water softener is beingreactivated.

Water softener

16

Salt indicator

When the salt reservoir is empty the kindicator light b comes on to remindyou to fill the reservoir.

Reactivation takes place automaticallyduring a programme.The programme sequence indicatorlight k a lights up whilst this ishappening.

Water softener

17

Loading the machine

Preparing the load

^ Empty all containers before loadinginto the machine.

,Ensure that no acid or solventresidues, especially hydrochloricacid or chlorides, get into the washcabinet.

Please note

^ Load items so that water will comeinto contact with all surfaces. Thisensures that they will be properlycleaned.

^ Do not place items to be cleanedinside other pieces where they maybe concealed.

^ Hollow vessels such as cups,glasses, pots etc. should be invertedand placed in the correct inserts. Thewater must be able to access themunhindered.

^ Deep-sided items should be placedat an angle so that water can run offthem unhindered.

^ Tall, narrow, hollow items should beplaced in the centre of the baskets toensure better water coverage.

^ Small pieces should be placed onthe cup racks in the upper basket.Do not obscure them by larger itemsbelow. Cups should be on the lowerrack and bowls on the top rack sothat water reaches all items.

^ The water duct for the spray arm inthe middle of the upper basket mustnot be obstructed.

^ The spray arms must not be blockedby items which are too tall or whichhang down in their path. If necessary,manually rotate the arms to test.

Use the upper basket for:

^ Small lightweight, delicate items suchas cups, saucers, glasses, dessertbowls etc., as well as for lightweightthermally stable plastic items.

Use the bottom basket for:

^ Larger and heavier items such asplates, serving platters, saucepans,bowls etc. Glasses may only becleaned in the bottom basket if it isfitted with a special glassware insertor if there is a special bottom basket.

Cutlery

^ Unsorted cutlery should be placed inthe cutlery holders with the handlesfacing downwards.However, to avoid the risk of injury,sharp kinves etc. should be placedwith the pointed end facingdownwards.

Select baskets and inserts which areappropriate for the application.

See examples on the followingpages.

Loading the machine

18

Loading examples:

O 881 Top basketfor 20 cups, 24 saucers or 12 dessertplates.

U 880 Bottom basketwith 2 x E 216 half inserts each for 15plates Ø 240 mm and 2 x E 165 cutlerybaskets for mixed cutlery.

Individual top and bottom baskets

O 889 Top basket carrierto take various inserts, e.g. containersfor cutlery and glasses.

U 880 Bottom basketwith E 884 insert 1/1 for 20 large platesor 10 trays.

Loading the machine

19

Glass set GG/F-GL

O 882 Top basketfor 27 glasses Ø 65 mm.

U 880 Bottom basketwith 2 x E 205 half inserts each for 14glasses Ø 65 mm.

Loading the machine

20

Adjusting the top basketThe top basket can be adjusted aboveand below the middle position by 2.5cm. It is set in the middle position ondelivery.

Depending on the position of the topbasket, plates of the following diametercan be accommodated in the baskets:

Example: Top basket O 881

Top basketposition

Top basketplate Ø in

cm

Bottombasket

plate Ø incm

Top max. 16.5 24 *)

Middle max. 19 24 *)

Bottom max. 21.5 24 *)

*) in insert E 216. For plates up toØ 30 cm, use insert E 888.

To adjust the top basket:

^ Pull out the top basket until aresistance is felt; lift from the runnersand remove.

^ Unscrew the knurled nuts (rollerbearings) on both sides of the basketwith a suitable spanner andreposition as required.

Items not suitable fordishwashers^ Cutlery with wooden or horn handles.

^ Wooden or plastic cutting boards.

^ Glued items, e.g. old knives withhandles which have been glued on.

^ Hand-made craft items.

^ Copper or tin items.

^ Plastic items which are not heatresistant.

Please note

^ Silver and aluminium items can suffersome discolouration.

^ Colours painted over a glaze mayfade after a number of washes.

^ Clouding may occur on glasses afterfrequent washing.

Our recommendations

^ Wash delicate glassware by hand.

^ When purchasing new glasses,dishes and cutlery make sure theyare dishwasher safe.

Loading the machine

21

Rinsing agent is necessary to ensurewater does not cling and leave markson items during the drying phase andto help items dry faster after they havebeen washed.Rinsing agent is poured into thestorage reservoir and the amount set isdispensed automatically in the finalrinse.The rinsing agent reservoir holdsapprox. 125 ml.

Except: Rinsing agent is not dispensedin the final rinse in the BEER GLASSprogramme. The final rinse in thisprogramme is carried out with cold wa-ter only.

,Inadvertently filling the rinsingagent reservoir with powder or liquidcleaning agent will always causeserious to damage the reservoir.Make sure you use a rinsing agentwhich is suitable for use in thismachine.

Adding rinsing agent

If the H Add rinsing agent indicatorlight on the control panel comes on, therinsing agent reservoir must be refilled.

^ Open the door fully.

^ Press the button in the direction ofthe arrow until the flap springs open.


22

^ Add rinsing agent only until it isvisible on the surface of the filter inthe opening.

^ Close the flap firmly. The flap mustaudibly engage, otherwise watercould get into the rinsing agentreservoir during the programme.

^ Mop up any spilt rinsing agent. Thisprevents over-foaming occuringduring the next programme.

The flap should always remain closed.Only open it to add more rinsing agent.

^ Wait until the H indicator light on thecontrol panel lights up again beforeadding any more rinsing agent.


23

Setting the dosage

The dosage adjuster in the opening hassettings from 1 to 6 (1-6 ml). It is set to3 (3 ml) at the factory as therecommended dosage for rinsingagent.

^ Use a higher setting if there aremarks on the surface of utensils afterdrying.

^ Use a lower setting if the surfacebecomes cloudy and smeary.


24

,Only use cleaning agentssuitable for specialist machines. Donot use detergents formulated fordomestic dishwashers.

Powder cleaning agent is dispensedvia the dispenser for powder cleaningagents in the door or liquid cleaningagent via the DOS module (available asan optional extra - see “Note” on thenext page).

If liquid cleaning agent is not beingused, powder cleaning agent must beplaced in the cleaning agent dispenserprior to every programme (with theexception of J SUPER SHORT and DPRE-RINSE, see Programme J on thenext page and the notes in theprogramme chart).

^ Press the opening catch on thecontainer forwards (see arrow). Theflap will spring open. (The flap isalways open at the end of aprogramme).

^ Add powder cleaning agent tocompartment II.

Dosage: Approx. 3 g/l, or 20 g perwash cycle.Approx. 7 litres of water are used in themain wash.

Follow cleaning agent manufacturer’sinstructions if they differ.

^ Close the dispenser lid.

Adding cleaning agent

25

Programme J SUPER SHORT:

^ If liquid cleaning agent is not beingused for this programme, addpowder cleaning agent directly to theinside of the door.

Some types of soiling may requiredifferent combinations of cleaningagents and other additives. The MieleProfessional Department will bepleased to advise you.

Note

As a chargeable optional extra, thismachine can also be fitted with a DOSModule G 60 dispenser pump for liquidcleaning agent. This is connectedexternally.See Programming special functions forventing the dispensing system andsetting the dosage.

The optional DOS Module is suppliedwith its own installation and connectioninstructions.

Maintenance of the dispensingsystemTo ensure trouble-free operation,regular maintenance should be carriedout at specified intervals by a Mieleapproved service technician.

Every 12-18 months

Replace the dispensing hoses in theDOS modules.

,Take great care when handlingliquid agents and additives. Thesemay contain irritant or corrosiveingredients.Please follow the manufacturer’ssafety instructions.Wear protective gloves and goggles.

Adding cleaning agent

26

Choose your programme according tothe type of instruments or utensils beingcleaned, and the degree of soiling.

The different programmes and theiruses are described overleaf in theProgramme Chart.

Programme selection

27

Programme When to use Powder cleaning agent(when not using liquid

cleaning agent)

Follow manufacturer’sinstructions

DPRE-RINSE

To rinse heavily soiled items, (e.g. for removingsoiling or to prevent soiling drying on to disheswhen a complete programme does not yet needto be run).

,BEERGLASSES

Special programme for beer glasses.(Instead of being left to dry in the machine, beerglasses are taken out and dried by hand).

20 g in the powderdispenser

oGLASSWARE

Special programme for glasses. 20 g in the powderdispenser

sSHORT

Quick programme for lightly soiled crockery. 20 g in the powderdispenser

JSUPER SHORT

For crockery that is in continuous use. 20 g on the right hand sidedoor interior

GUNIVERSAL

For normally soiled loads. 20 g in the powderdispenser

nUNIVERSALPLUS

For normally soiled items with a higher washtemperature for removing foods rich in starch


FINTENSIVE

For heavily soiled crockery. Most of the soiling isremoved in an intensive cold-water pre-rinse.


6DRAIN

For draining water out of the machine, e.g. whena programme has been interrupted. Turn theprogramme selector to the STOP position f first.

*) Important information for the SUPER SHORT programmeAfter completion of the programme, the final rinse water is not drained away; it is used as the cleaningwater for the following SUPER SHORT programme.If operation is interrupted for longer periods of time, or if a different programme is required:

^ Select additional programme 6 DRAIN; the final rinse water drains automatically.

Programme chart

28

Programme sequence

1.Economypre-wash

2.Pre-wash

3.Main wash

4.Economyinterimrinse

5.Interimrinse I

6.Interim

rinse II 3)

7.Final

rinse

8.Drying

(Additionalprog.)

X

X50°C/1’

1)

X (X) X—/1’

4)

(X)

X50°C/1’

1)

X (X) X50°C/1’

1)

(X)

X X55°C/1’

1)

(X) X60°C/1’

1)

(X)

X55°C/1’

1)

(X)2)

X *)55°C/1’

1)

X X55°C/2’

1)

X (X) X60°C/1’

1)

(X)

X X60°C/3’

1)

X (X) X60°C/1’

1)

(X)

X X X65°C/3’

1)

X (X) X60°C/1’

1)

(X)

X = Sections included in a programme (with temperature/temperature holding time)

1) To change a temperature or temperature holding time, see Programming special functions.Important: We recommend programming a main wash temperature of 60°C for cleaning dirtycrockery.

2) To select an economy interim rinse see Programming special functions.3) To select a second interim rinse see Programming special functions.4) With cold water and without rinsing agent.

29

Switching on^ Close the door.

^ Open the stopcocks (if turned off).

^ Press the I-0 button.

When the programme selector is at theSTOP position f a point lights up in thedisplay.

Starting a programme

^ Turn the programme selectorclockwise or anti-clockwise to therequired programme.The temperature of the programmeselected is shown in the display,except with PRE-RINSE D andDRAIN 6.The indicator light next to the STARTbutton 6 flashes.

^ Select additional function DRYING3 if required (see "Selecting anadditional function").

^ Press the START button 6. Theduration of the programme selectedwill appear in the display, countingupwards in minutes.The indicator light next to the STARTbutton lights up.

Once the programme has started, allother programmes are blocked. If theprogramme selector is then turned toanother programme, the values shownin the display go out. The values can beseen again if the programme selector isturned back to the position of theprogramme currently in operation.

^ Press the 4 button to alternatebetween showing the currenttemperature and the amount of timeelapsed in the display.

Note that during the heat-up stage in"Main wash" and "Final rinse" therequired end temperature is shown inthe "time run" display.

Operation

30

Changing a programme

Provided the START button has not yetbeen pressed, a wrongly selectedprogramme may be changed asdescribed below (if it has beenpressed, see Cancelling a programme):

^ Turn the programme selector to therequired programme.

^ Select additional function DRYING3 again if required (see Selectingan additional function).

^ Press the START button 6.

Selecting an additional function

The following additional function can beselected:

^ 3 DRYINGDrying may be selected as anadditional function as soon as aprogramme has been selected (withthe exception of J SUPER SHORT,D PRE-RINSE and 6 DRAIN). Thedrying phase operates with pulsedheating for ten minutes. The totalrunning time of the programmelengthens accordingly.

Programme sequence indicators

The indicator light for the activeprogramme stage lights up during theprogramme.

k Reactivation

I Pre-wash

l Main wash

m / H Interim rinse/Final rinse

c Drying (additional function)

Programme end

The programme has ended when nomore programme sequence indicatorlights are lit up and the "Start" indicatorlight 6 has gone out. A 0 will appear inthe middle of the display.The buzzer will sound at the same timefor a max. of 30 seconds (standardsetting). The buzzer can be changed(see "Programming special functions").

Use the 4 button to see the totalrunning time of a programme or theactual temperature.

Switching off^ Press and release the I-0 button.

Operation

31

To cancel a programmeOnce a programme is running it shouldonly be cancelled in extreme cases,e.g. when articles in the machine rattleor jostle against each other and have tobe rearranged.

^ Turn the programme selector to thef position (the programme iscancelled after approx. 2 secs.).

^ Open the door a

,Caution - Water and items in themachine may be hot. Danger ofburning or scalding.

^ Arrange the load securely.(Wear protective gloves wherenecessary, and observe appropriatehealth and safety regulations relatingto infectious diseases).

^ Replenish powder cleaning agent ifnecessary.

^ Close the door.

^ Select the DRAIN programme 6 (wa-ter in the machine is pumped away).

^ Select the cleaning programme againand start it as previously described.

Operation

32

For future servicing work, pleasedocument any alterations to the stan-dard factory settings.Enter any alterations in the relevantValue set:_________ box. .

1. Setting the cold water inlet from:Nominal water intake to Nominal wa-ter intake + 1 l.

The amount of water taken into themachine at each intake can beincreased by 1 litre to a maximum of9.5 litres.

To do this:

^ Turn the programme selector to STOPf.

^ Switch the machine off.

^ Press and hold 4 and 6 at thesame time, and whilst doing soswitch the machine on with the I-0button.The current programme status “P...”appears in the display and the p / 6indicator lights up.


^ Turn the programme selector to theD position. A 10 or an 11 will appearin the display.10 = Nominal water intake11 = Nominal water intake + 1 l

^ Press 4 to change from 10 to 11 orvice versa.

^ Press 6. SP appears.

^ Press 6 again. The change hasbeen recorded.

Value set:

2. Selecting a second interim rinse

"Interim rinse II" can be programmed into improve interim rinsing in allprogrammes (with the exception ofDPRE-RINSE and J SUPER SHORT).





^ Turn the programme selector to o. A30 or an 31 will appear in the display.30 = without Interim rinse II.31 = with Interim rinse II.




Value set:

Programming special functions

33

3. Selecting economy interim rinse(only for J “SUPER-SHORT”)



^ Press and hold 4 and 6 at thesame time and, whilst doing so,switch the machine on with the I-0button.The current programme status "P..."will show in the display.The indicator light p / 6 will comeon.


^ Turn the programme selector to s.A 40 or a 41 will appear in thedisplay.40 = without Economy Interim rinse.41 = with Economy Interim rinse.




Value set:


34

4. Venting and setting the dosage onDOS modules G 60 and C 60(optional extra)

^ Set the dosage selector on the DOSmodule to position 10 (applies toDOS Module C 60 only).



^ Press 4 and 6 at the same time,hold them in and, whilst doing so,switch the machine on with the I-0button.The current programme status "P..."will show in the display.The indicator light p / 6 will comeon.

^ Press 3 twice, E02 for programminglevel 2 will appear in the display.

Venting the dispensing system:

^ Turn the programme selector to theD position. do1 appears in thedisplay.

^ Press 4 for 90 seconds.The dispensing system will be ventedautomatically.

If only venting is required:

^ Switch the machine off with the I-0button.

Immediately after this: start thePRE-RINSE D programme, so that afterventing any agents in the wash cabinetare diluted before being drained away.

Setting the dosage:

Set the dosage according to themanufacturer’s recommendations.

The machine needs 7 litres of water inthe main wash stage of the programme.

Example:A manufacturer recommends 4 mlcleaning agent per litre of water:7 l x 4 ml/l = 28 ml.2 ml . 1 second dispensing time; i.e.programming to 14 seconds.

^ Turn the programme selector to ,, thedispensing time in seconds appearsin the display, e.g 10.

^ Press 4 repeatedly or hold it in, untilthe number 14 appears in the display(dispensing time 14 seconds . 28 ml- see example - ).The dispensing time/amount is set.

^ Having changed a value or allvalues:



Value set:

If the dispensing system also needs tobe vented:

^ Start the PRE-RINSE programmeD,so that after venting any agents in thewash cabinet are diluted beforebeing drained away.


35

5. Altering the temperature and/or thetemperature holding time in the“Main wash” and “Final rinse”programme stages

Please make a note of any changesto the temperature and / or thetemperature holding time in theappropriate section of theprogramme chart.

The programme chart shows the factorysettings for the Main wash temperaturetogether with temperature holding timeand the Final rinse temperature with itstemperature holding time.The special functions can be used toalter the temperatures of the main washand of the final rinse from 30 °C -70 °Cand the temperature holding time from1-10 minutes.

Important: We recommendprogramming a main wash temperatureof 60°C for cleaning dirty crockery.The final rinse temperature cannot beprogrammed or altered in the , BEERGLASSES programme.

^ Turn the programme selector to theSTOP position f (the programminglevel is displayed only in this switchposition).



^ "Main wash" temperature:Press 3 three times, E03 forprogramming level 3 will appear inthe display.

^ Turn the programme selector to theprogramme which needs to bechanged. The actual value appearsin the display after °C.

^ Press 4 or hold it in, until therequired value appears in the display.

^ "Main wash" temperature holdingtime:Turn the programme selector to theSTOP position f(the programming level is onlydisplayed in this switch position).

^ Press 3 again, E04 forprogramming level 4 will appear inthe display. Then:

^ Turn the programme selector back tothe programme which needs to bechanged. The actual value appearsin the display after min.

^ Press 4 until the required valueappears in the display.

^ "Final rinse temperature:Turn the programme selector to theSTOP position f(the programming level is onlydisplayed in this switch position).



36

^ Turn the programme selector back tothe programme which needs to bechanged. The actual value appearsin the display after °C.

^ Press 4 or hold it in, until therequired value appears in the display.

^ Final rinse temperature holdingtime:Turn the programme selector to theSTOP position f(the programming level is onlydisplayed in this switch position).


^ Turn the programme selector back tothe programme which needs to bechanged. The actual value appearsin the display after min.

^ Press 4 until the required valueappears in the display.

^ Having changed a value or allvalues:




37

6. Delay start and setting the delaystart time

The start of a wash programme can bedelayed by up to 9 hours and 30minutes in 30 minute stages.

Note:Delay start should only be selected withthe Universal and Intensiveprogrammes. Because items in themachine stand for a longer periodbefore being cleaned, residues can dryon if the start time is delayed. Shorterprogrammes may not be able toremoved dried on soiling adequately.

a) To activate Delay Start





^ Turn the programme selector to 6.80 or 81 will appear in the display.80 = No delay start81 = Delay start active.




Value set:

b) Setting the delay start period

The delay start period (from 30 minutesto 9 hours and 30 minutes) has to beset before a programme is started.

^ After selecting a programme (see“Switching on”) Press the 4 buttonor hold it in until the required value isdisplayed. The “Delay Start” indicatorlight comes on.

After the START button 6 has beenpressed the delay start period willcount down in the display until theprogramme automatically starts.


38

7. Audible tone (Buzzer)

This special function allows you toprogramme a buzzer (lasting up to amaximum of 30 seconds) for thefollowing functions:

– Programme end = Constant buzzer

– Fault warning = Buzzer at onesecond intervals





^ Turn the programme selector nineswitch positions clockwise (9 o’clockposition).A number from 90 to 93 will appear inthe display.90 = buzzer switched off.91 = buzzer at end of programme(standard setting)92 = fault indication93 = buzzer for all functions (at endof programme and for faults).

^ Press 4 until the required function isdisplayed.



Value set:

Note:The buzzer can be switched off earlyby

– turning the programme selector tothe STOP position f,

– interrupting the power supply (e.g.by opening and closing the door).


39

8. Re-setting all parameter changesback to the factory settings.




^ Press 3 seven times, E07 forprogramming level 7 will appear inthe display.

^ Turn the programme selector to anyswitch position (except STOP).00 or PP will appear in the display.00 = factory setting(Electronics have not beenre-programmed).PP = Electronics have beenre-programmed.

^ If PP is displayed press 4 tochange from PP to 00.


^ Press 6 again. All values which hadbeen changed have now been nowreset to the factory settings.

If the hardness level setting in the watersoftener had been changed this willreset to the factory setting of 19 °d (3.4mmol/l). This will need to be reset tosuit the hardness level in your area.


40

Cleaning the filters in the washcabinet

,The machine must not be usedwithout all the filters in place.

The filter combination in the base ofthe wash cabinet should beinspected regularly and cleaned ifnecessary.

,Caution:Watch out for glass splinters whichcould cause injury.

Cleaning the coarse filter

^ Press the two lugs together, removeand clean the filter.

^ Put the clean filter back in positionand press it until it clicks into place.

Cleaning the flat and the micro-finefilters

^ Remove the coarse filter.

^ To unscrew the micro-fine filter, takehold of the two lugs and turn twice inan anti-clockwise direction,

^ and remove, together with the flatfilter.

^ Clean the filters.

^ The filter combination is thenreplaced in the reverse order inwhich it was removed.

Cleaning and care

41

Cleaning the spray armsWaste particles can lodge in the sprayarm jets.The spray arms should be inspectedand cleaned regularly (approx. every6 months).

^ Use a sharp pointed object to pushparticles into the spray arm jets andrinse well under running water.

Remove the spray arms as follows:

^ Unscrew the upper spray arm.

^ Remove the middle spray arm (onthe top basket) by unscrewing thetoothed wheel mechanism.Important:The toothed wheel mechanism has aleft hand thread, and to unscrew it, itmust be turned to the right with thespray arm.

^ First remove the bottom basket andthen pull the lower spray arm off.

Particles in the lower spray arm areeasier to rinse out if the cap is firstopened.

^ Open the cap in the direction of thearrow. After cleaning close up thecap again.

Important:After replacing the spray arms checkthat they move freely.

Cleaning and care

42

Cleaning the drain pump andnon-return valveIf water has not been pumped away atthe end of a programme the drainpump or the non-return valve might beblocked. They are however, easy toclean.

^ Take the filter combination out of thewash cabinet.

^ Release the locking clamp.

^ Lift up the non-return valve and rinseunder running water.

The drain pump is situated under thenon-return valve (see arrow).

^ Before replacing the non-return valvecheck that the drain pump is free ofobstructions.

^ Carefully replace the non-return valveand secure with the locking clamp.

Cleaning and care

43

Cleaning the filters in the waterinletFilters are incorporated in the screwconnection of the water inlet hose toprotect the water inlet valve. If thesefilters get dirty they need to be cleaned,otherwise insufficient water flows intothe wash cabinet.

,The plastic housing of the waterconnection contains an electricalcomponent. It must not be dipped inwater.

To clean the filters

^ Disconnect the machine from themains supply (switch off at the mainsand pull out the plug, switch off theappropriate circuit in the fuse box orwithdraw the mains fuse).

^ Turn off the stopcock and unscrewthe water inlet hose.

^ Clean the large area filter (1) and finefilter (2), and replace with new filtersif necessary.

^ Replace filters and the seal. Makesure they are sitting correctly.

^ Reconnect the hose to the water inlet,making sure that it goes back onstraight.

^ Open the stopcock carefully.If there is a leak, screw theconnections on more tightly.

Cleaning the control panel^ This should only be cleaned with a

damp cloth or a suitable cleaner foruse on plastic materials, or with adisinfectant tested and recognisedas suitable for this use.

,Do not use abrasive cleaners,glass cleaners or all-purposecleaners.Because of their chemicalcomposition they could causeserious damage to plasticcomponents.

Cleaning the front of themachine^ Clean using a proprietary cleaning

agent designed for the type of frontthe machine is fitted with.

,Do not use cleaning agentscontaining ammonia or thinners.

Cleaning and care

44

With the aid of the following explanatorynotes, minor faults can be correctedwithout contacting the Miele ServiceDept.

Any work on the electrical componentsof the machine should only be carriedout by a suitably qualified andcompetent person in accordance withlocal and national safety regulations.Unauthorised repairs could bedangerous.

Faults / possible causes

The machine does not start

– The door is not properly closed.

– The machine is not switched on atthe mains.

– The fuse is defective / has blown.

A few minutes after switching on, thep / 6 indicator light flashes (faultcode F..E appears in the display)

– The stopcocks are closed.

– The filters in the water inlet hose aredirty.

– The water pressure is too low.

^ Turn the programme selector to theSTOP position f (the fault codegoes out).

^ Press I-0 to switch the machine off.

^ Open the stopcocks or clean thefilters (see "Cleaning and Care").

^ Switch the machine on again andreselect the programme.

The wash cycle finishes too early andthe p / 6 indicator light flashes(fault code F A appears in thedisplay)

– The drain hose is kinked.

– The drain pump is blocked

^ Turn the programme selector to theSTOP position f (the fault code goesout).

^ Straighten the hose and check/cleanthe drain pump.

^ Pump away the water and start theprogramme again (see additionalprogramme "DRAIN" and "Switchingon").

Correcting minor faults

45

Water in the wash cabinet is notheated; the programme sequencelasts too long

This machine has a resettable heaterlimiter which will switch off the heaters ifthey over-heat. This could be causedfor example, by large articles coveringthe heating elements or if the filters inthe wash cabinet are blocked.

^ Remove the cause of the fault.

^ Take off the service panel (see"Electrical connection").

^ Press the reset button on the heaterlimiter (yellow) located on the left-hand side of the plastic cover.

If this switch trips again contact theMiele Service Department.

Customer serviceShould you still have any difficulties or ifa fault code "F..." appears in the displayagain, please contact your authorisedService Dealer or the Miele ServiceDepartment. See back cover foraddresses. Please quote the fault codeas well as the model type and numberof your machine.

Correcting minor faults

46

Please refer to the installationdiagram supplied with the machine.

,Furniture and fittings installednear the machine must be of acommercial standard able towithstand the effects of steam andcondensation.

The machine must be installed correctlyand levelled.Any unevenness in the floor level canbe compensated for and the height ofthe machine raised or lowered byadjusting the four screw feet.

The machine can be installed in thefollowing ways:

^ Free-standing.

^ Slot-in or at the end of a row:

The machine can be installed next toother machines or furniture or in asuitable niche. The niche must be atleast 60 cm wide and 60 cm deep.

^ Built-under:

The machine can be installed under acontinuous worktop or sink drainer.The recess must be at least 60 cmwide, 60 cm deep and 82 cm high.

If necessary, the machine lid can beremoved as follows:

^ Open the door.

^ Remove the fixing screws on the leftand right hand sides using a crossslotted screwdriver.

^ Pull the machine lid approx. 5 mmforwards, lift it upwards and removeit.

Installation

47

Position and secure the machine

To ensure stability the machine mustfirst be aligned and then screwed to theworktop.

^ Open the door. Secure the machineto the front edge of the worktop usingscrews through the holes on the leftand right hand sides of the front trim.

^ Do not use silicone sealant to sealthe gaps between the machine andany neighbouring units as this wouldhinder ventilation to the circulationpump.

Depending on the requirements forbuilding under, the following kits can beordered from the Miele Spares Dept.:

Cover plate (protects the worktop)

The underside of the worktop isprotected against water damage by astainless steel plate.

Decor frame fitting kit

The machine front can be fitted with adecor panel to match kitchen units.The decor frame is supplied with fittinginstructions.

Installation

48

,All electrical work must becarried out by a suitably qualifiedand competent person inaccordance with local and nationalsafety regulations.

^ Connection should be made via asuitable isolator, with an on-off switchwhich should be easily accessible forservicing work.

WARNINGTHIS APPLIANCE MUST BEEARTHED

^ For extra safety it is advisable toinstall a residual current device with atrip current of 30 mA (in accordancewith DIN VDE 0664).

^ The mains connection cable mayonly be replaced by an original Mielespare part or an apppropriate cablewith wire end ferrule.

^ For technical data see data plate orwiring diagram supplied.

The machine must only be operatedwith the voltage, frequency and fusingshown on the data plate.

This machine can be converted inaccordance with the conversiondiagram and wiring diagram supplied.

The data plate (with test certificationVDE, DVGW etc.) and conversion keyare located on the rear of the machineand also behind the plinth panel belowthe protective plastic cover.

The wiring diagram is secured to theinner side of the protective plasticcover.

Removing the plinth panel and theprotective plastic cover:

,Disconnect the machine from themains electricity supply.

^ Holding the plinth panel at bothsides, pull gently outwards frombeneath a and pull it off b.

^ To remove the protective plasticcover loosen the 2 screws (left andright) c.

To re-assemble:

^ Refit the protective plastic cover andthe plinth panel in the reverse orderto which they were removed.

See also the installation diagramsupplied.

Bonding connection

There is a screw connection pointmarked with the earth symbol (8) atthe back of the machine, to which theearth lead must be connected.

Electrical connection

49

Connection to the water inlet

,Water in the machine must notbe used as drinking water.

^ The machine must be connected tothe water supply in accordance withlocal and national water authorityregulations.

^ This machine is constructed tocomply with German waterregulations (DVGW), and may beconnected to a suitable supplywithout an extra non-return valve ifnational regulations permit.

In the UK this machine is listed as aWRAS approved product in the WaterFittings and Materials Directory ofproducts which comply with the Wa-ter Fittings Regulations. It isapproved for mains water connectionin fluid categories 4 and 5, wheninstalled using the double checkvalves supplied.

^ The water pressure (flow rate) mustbe a minimum of 0.5 bar (50 kPa).If the water pressure (flow rate) isbelow 2 bar (200 kPa) the fill time isautomatically extended.The max. permitted static pressure is10 bar (1000 kPa).If the water pressure is not in therange of 0.5 to 10 bar (50-1000 kPa)the p / 6 indicator light may comeon and fault code F2 E in the display.Please contact the Miele ServiceDepartment.

^ The machine is supplied as standardfor connection to a cold (coded blue)and hot (coded red) water supply upto a max. temperature of 70 °C.The inlet hoses should be connectedto the cold and hot water stopcocks.If there is no hot water connection thehot water inlet hose marked redshould also be connected to a coldwater stopcock. In other words bothinlet hoses are connected to the coldwater supply.

^ Stopcocks with 3/4 BSP male threadare to be provided on site. Theyshould be easily accessible so thatthe water supply can be turned offwhen the machine is not in use.

^ The DN 10 inlet hoses are approx.1.7 m long terminating in a 3/4 inchfemale thread. On no account mustthe inlet filters be removed.

^ Large surface area filters areenclosed in the kit supplied with themachine for installing between thestopcock and the inlet hose(see illustration in "Cleaning and Care- Water inlet").

Plumbing

50

,The inlet hoses must not beshortened or damaged in any way(see illustration).


Plumbing

51

Drainage^ The drainage system is fitted with a

non-return valve which prevents dirtywater from flowing back into themachine via the drain hose.

^ The machine should preferably beconnected to a separate drainagesystem on-site.If separate drainage is not availablecontact your Miele applicationspecialist for professional advice.The on-site drain connection pointshould be sited between 0.3 m and 1m above the lower edge of themachine.If it is lower than 0.3 m lay the hose ina curve at a height of at least 0.3 m.The drainage system must be able totake a minimum drainage flow of 16l/min.

^ The inlet hose is approx. 1.4 m long,is flexible and has an internaldiameter of 22 mm. It must not beshortened.Hose clips are supplied for securingit in position.

^ A longer drain hose (up to 4 m long)is available to order from the MieleSpare Parts Dept.

^ The drainage system must notexceed 4 metres.


Plumbing

52

Height: 85 (82) cm

Width: 60 cm

Depth: 60 cm

Voltage: see data plateRated load: see data plateFuse rating: see data plate

Mains connection cable: approx. 1.8 m

Water pressure (flow rate): 0.5 - 10 bar (50 -1000 kPa)

Cold and hot water connections: up to max. 70 °C

Delivery head: min. 0.3 m, max. 1 m

Drainage length: max. 4 m

Inlet hose approx. 1.7 m

Drain hose: approx. 1.4 m

Noise level in dB (A):Sound level LpA Free standing: <70

Built under: <70

Test marks: VDE, interference suppression, DVGW,!

Technical data

53

M.-Nr. 05 234 501 / 01Alteration rights reserved / 3105

miele dishwasher g7856

Devices & Hardware