mikro kietumo matavimas aukščiausiu tikslumu - qness.at · vickers din en iso 6507, astm e-384,...
TRANSCRIPT
Mikro kietumo matavimas aukščiausiu tikslumu MICRO HARDNESS TESTING IN ULTIMATE PRECISION
Vickers DIN EN ISO 6507, ASTM E-384, ASTM E92
HV0.00025 HV0.0005 HV0.001 HV0.002 HV0.005 HV0.01 HV0.02
HV0.025 HV0.05 HV0.1 HV0.2 HV0.3 HV0.5 HV1
HV2 HV3 HV5 HV10 HV20 HV30 HV50
Knoop DIN EN ISO 4545, ASTM E-384, ASTM E92
Brinell DIN EN ISO 6506, ASTM E-10
HK0.00025 HK0.0005 HK0.001 HK0.002 HK0.005 HK0.01 HK0.02
HK0.025 HK0.05 HK0.1 HK0.2 HK0.3 HK0.5 HK1, HK2
1/1 1/2.5 1/5 1/10 1/30 2,5/31,25 2,5/62,5 5/62,5*
DIN EN ISO 18265 DIN EN ISO 50150 ASTM E140
2
BANDYMO METODAI IR APKROVOSTest force range and force application
Integruoti perskaičiavimai / Integrated conversions
Capacitive 12” touch displayCapacitive 12” touch display
XY-stalelis
XY-cross slide
Programinė įranga
Bandinio vizualizavimo kamera
Sample image camera
Bandymų stale-lis Ø 100 mm
Test anvil
Software
Bandymo apkrovos ribų išplėtimas (papildomas pasirinkimas) / Test force extension (optional)
Elektroniškai valdomos apkrovos užtikrina greitą ir tikslų kietumo mata-
vimą, taip pat greitą metodo keitimą ir automatinį sufokusuoto sluoksnio
atpažinimą.
Electronically controlled test forces ensure quick and precise hard-
ness testing as well as rapid test method changeover (maintenance
free) and automatic recognition of the focus height.
Svarelių sistemos Dead weight systems
Valdomos elektroniškai Electronically controlled
*) > 30 HBW
XY-Kreuzschlitten
XY-cross slide
PALAIKOMI BANDYMŲ METODAI IR KONVERTAVIMASSupported test methods and conversions
THE VARIANTS
Modeliai
0,25 g 50 g 10 kg
0,25 g 100 g 31,25 kg
0,25 g 200 g 62,5 kg
3
Modeliai
DIGITAL CROSS SLIDE WITH DATA FEEDBACK
Digital crossslide with data feedback
OPTION
4
420 mm
145
mm
300 mm
1 2 3
didelę ir patogią erdvę bandymams. Visiškai automatizuotas
XY-stalelis, turintis aukšto tikslumo optinio kelio matavimo sis-
temą, gali būti naudojamas kartu su, pavyzdžiui, 8 pozicijų mė-
ginių laikikliu. Be to, naudodamas programinę įrangą vartotojas
gali kurti specifi nes bandymų procedūras.
6 pozicijų revolveris pateikiamas standartiškai su visais
modeliais ir suteikia galimybę atlikti įvarius testavimo
metodus. Pavyzdžiui, revolveryje galima sumontuoti 3
skirtingo didinimo objektyvus bei atitinkamus indentorius
Vikers, Knoop ir Brinell testams.
Elektroninis poslinkio valdymas užtikrina greitą, tikslų ir
jautrų antgalio judėjimą. Pozicionavimas virš sukimosi
kampo (nuo 0.01 iki 20 mm/s) atliekamas paprastai,
tiksliai, be susidūrimo rizikos. Ši funkcija įgyvendinama
pasitelkus papildomą Z ašį.
TIKSLUS POZICIONAVIMAS IR DAUG VIETOS TESTAVIMUI
6 POZICIJŲ REVOLVERIS
DINAMIŠKAS AUKŠČIO REGULIAVIMAS
The electronic movement control allows quick,
accurate and sensitive positioning of the test head.
Forceless, precise and collision-proof positioning
of the test head via rotating the control knob. (0.01
up to 20 mm/s). An additional Z-axis makes this
helpful function possible.
Exact positioning and large test room 6-fold measurement turret Dynamic height adjustment
Tiesioginio kelio matavimas naudojant aukšto tikslumo stiklo skalę Direct path measurement with high-precision glass scale
Rezoliucija Resolution 0,5 μm
Maksimalus matomumas Maximal visibility
Dynamic Joystick (3 axis X, Y, Z) Dynamic Joystick (3 axis X, Y, Z)
The 6-fold measurement turret is supplied as standard
in all models and off ers space for various test methods.
For example it can be equipped with 3 diff erent mag-
nifi cation lenses and the corresponding penetrators for
Vickers, Knoop or Brinell.
The sophisticated construction in anodized aluminium off ers a
large and well arranged test area. The fully automatic XY-slide
with high precision optic path measurement system can be
equipped i.e. with an 8-fold sample holder. Beyond that,
customer specifi c magazines can be managed and created in
the software.
HIGHLIGHTS & FEATURES
Pagrindinės charakteristikos
PATENT
5
4 5
OPTION
AutoSnap
to the Movie »
KRAŠTOATPAŽINIMASEdge recognition
The function of the Qness software module Edge recogni-
tion is the automatic adaption of test row start points to the
sample edge when using project and sample templates.
The module increases the machines automation and is
the perfect add-on feature to the standardized AutoSnap
function.
The function of the Qness software module Edge recognition is the automatic ad-
aption of test row start points to the sample edge when using project and sample
templates. The module increases the machines automation and is the perfect
add-on feature to the standardized AutoSnap function.
IPC-TECHNOLOGIJA / BESISUKANTIS INDENTORIUSIPC-technique / Penetrator turnable
Pirmą kartą atliekant kietumo matavimą, in-
dentorius automatiškai paraleliai prisitaiko prie
kontūro.
For the fi rst time in hardness testing the
indenter adapts itself fully automatically
parallel to the contour during the test
cycle.
IPC - Indentorius paraleliai su kontūru (Indenter parallel
to Contour). Operatorius gali pritaikyti indentorių prie
atitinkamo kontūro. Naudojantis šia nauja technologija,
atsiranda galimybė racionaliai ir tiksliai atlikti skirtingų me-
džiagos sluoksnių testus.
IPC - Indenter Parallel to Contour
The operator can adapt the indenter to the respective
contour, either manually or fully automatically.
Based on this new development diff erent material layers
can be tested precisely.
to the Movie »
Paviršinio sluoksnio kietumo profi lis
Surface layer hardness profi le
OPTIONOPTIONOPTION IPC-TECHNIC
OPTION
PATENT
IPC-TECHNIC
OPTION
PATENT
6
Duomenų valdymas ir bandymo ataskaitų kūrimasData management and test report creation
CHD sekaCHD progression
Išsami statistikaNumerous statistics
Įvestis virtualia klaviatūraInput by virtual keyboard
- Nuosekli programinė įranga
- Visiškai automatizuota vaizdo analizė
- Standartinis 2x priartinimas visiems objektyvams
- Greitas automatinis fokusavimas
- Galimybė atlikti pakartotinį testą rankiniu būdu
- Didelis statistinių funkcijų pasirinkimas: stulpelinės diagramos, progresijos, histogramos.
- Galimybė eksportuoti matavimo verčių sąrašą Excel palaikomu formatu (CSV)
- Standartizuota, detali informacija kiekvienam įspaudui
- A4 protokolas PDF formatu/ tiesioginis spausdinimas
- Vartotojų paskyrų valdymas pagal skirtingus prieigos lygius.
- Across-the-line software design
- Fully automatic image analysis
- 4x zoom as standard for each lens
- Quick auto-focus
- Possibility for manual remeasurement
- Numerous statistic functions: bar graph, progression, histogram
- Measurement value list to export as „Excel“ (CSV via export confi gurator)
- Detailed information to each indent according to standard
- A4 protocol as PDF / direct print
- User management with diff erent security access levelsErgonomiškos pozicijos parinkimo galimybė
Ergonomiškos pozicijos parinkimo galimybėErgonomically adaptable
Greitas objektyvų ir indentorių keitimasQuick change between lenses and penetrators
USB for data export and data input
Aukštos kokybės, tvirtas aliuminio korpusas
High-quality and sturdy aluminium case
Confi gurable protocol and
data presentation. Wide range of
structurationoptions for stored test
item data. Adaptable content
for export fi les and protocol
content simplifi es daily operation
with Qpix Control2 software.
Capacitive 12” touch displayCapacitive 12” touch display
ULTRA SIMPLE 12“ TOUCHSCREEN OPERATION
Paprastas valdymas naudojant 12“ lietimui jautrų ekraną
OPTION
Automatinis ryškumo nustatymas Automatic brightness regulation
2x priartinimas leidžia naudoti mažiau objektyvų 4x zoom saves lenses
MULTI-TOUCH
7
- Nuosekli programinė įranga
- Visiškai automatizuota vaizdo analizė
- Standartinis 2x priartinimas visiems objektyvams
- Greitas automatinis fokusavimas
- Galimybė atlikti pakartotinį testą rankiniu būdu
- Didelis statistinių funkcijų pasirinkimas: stulpelinės diagramos, progresijos, histogramos.
- Galimybė eksportuoti matavimo verčių sąrašą Excel palaikomu formatu (CSV)
- Standartizuota, detali informacija kiekvienam įspaudui
- A4 protokolas PDF formatu/ tiesioginis spausdinimas
- Vartotojų paskyrų valdymas pagal skirtingus prieigos lygius.
Confi gurable protocol and
data presentation. Wide range of
structurationoptions for stored test
item data. Adaptable content
for export fi les and protocol
content simplifi es daily operation
with Qpix Control2 software.
Confi gurable protocol and data pre-
sentation. Wide range of structuration
options for stored test item data. Adap-
table content for export fi les and pro-
tocol content simplifi es daily operation
with Qpix Control2 software.
Maksimalus pakartojamumas.
Visų bandymų specifi niai duomenys susieti su atitinka-
mais taškais. Bandymų taškai gali būti patikrinti, jiems
lengvai atliekamas pakartotinis bandymas.
Maximum repeatability. All test specifi c data are
stored for every single test point. Test points can be
easily checked or tested a second time.
Bandymo duomenų įvedimas Matavimo reikšmių valdymasCreation of test data Test result management
1 2
Visiškai automatizuotas eilučių ir sekų matavimasFully automatic row- and progression measurement
Nuolatinis ir intuityvus matavimasAcross-the-line and intuitive test cycle
SETS NEW STANDARDS
nustato naujus standartus
Pagal vartotojo poreikius pritaikytas mėginių laikiklisCustomer specifi c sample holder
Identical samples can be set up in the software
in scale as 3D model.
intuitive, structured and professional: Qpix Control2 heralds a new generation of hardness
testing software. It has been developed based on customer input and feedback to guarantee
maximum user-friendliness. New standards in hardness testing are now being established thanks
to the controlled test head with automatic height adjustment and contact-free gauging, complete
integration of the Qness sample holders, CAD compatibility with 3D component imaging and a wide
variety of easily comprehensible 3D control elements and view angles within the software.
Intuitive, structured and professional: Qpix Control2 heralds a new generation of hardness
testing software. It has been developed based on customer input and feedback to guarantee
maximum user-friendliness. New standards in hardness testing are now being established thanks
to the controlled test head with automatic height adjustment and contact-free gauging, complete
integration of the Qness sample holders, CAD compatibility with 3D component imaging and a wide
variety of easily comprehensible 3D control elements and view angles within the software.
Identical samples can be set up in the soft-
ware in scale as 3D model.
Galimybė peržiūrėti mėginius ir matavimo pozicijas iš skirtingų matymo laukų.View work pieces and test positions with diff erent fi elds of view
8
Mėginio pozicijos Nr. Sample place No.
Matavimo režimas Measurement mode
Spalvinis statistiniųduomenų skirstymas Colour allocation for
statistics
Išmatuota Measured
DInnovative CAS technology (Collision Avoidance System) protects the
mechanicalcomponents in the device from collisions and operating errors by ge-
nerating 3D preview calculations of all movements in the visualized testing area.
Innovative CAS technology (Collision Avoidance System) protects the mechani-
cal components in the device from collisions and operating errors by generating
3D preview calculations of all movements in the visualized testing area.
REVOLUTIONARY 3D OPERATING CONCEPT
Revoluionary 3D operating concept
MORE ACCURATE HARDNESS RESULTS RAPIDLY
CAS-Technic
3D-SmartView
LiveVision-Technic
InfoGraphic - Technic
Pagal vartotojo poreikius pritaikytas mėginių laikiklis
intuitive, structured and professional: Qpix Control2 heralds a new generation of hardness
testing software. It has been developed based on customer input and feedback to guarantee
maximum user-friendliness. New standards in hardness testing are now being established thanks
to the controlled test head with automatic height adjustment and contact-free gauging, complete
integration of the Qness sample holders, CAD compatibility with 3D component imaging and a wide
variety of easily comprehensible 3D control elements and view angles within the software.
9
The machine moves automatically to sample
holder height. Image of sample is taken auto-
matically.
AutoSnap – Speedy Row Set-up: Drag the row
of test points to the desired position. The serial
AutoSnap function corrects the starting point
of the test row automatically.
The test sequence is executed according to the
applicable hardness testing standards.
The machine moves automatically to sample
holder height. Image of sample is taken auto-
matically.AutoSnap – Speedy Row Set-up: Drag the row
of test points to the desired position. The serial
AutoSnap function corrects the starting point of
the test row automatically.
The test sequence is executed according to the
applicable hardness testing standards.
A RESULT IN 3 STEPS
A result in 3 steps
AutoSnap
1 LOAD SAMPLESLoad samples
2 LOAD ROWLoad row
3 START TEST SEQUENCEStart test sequence
Visiškai automatizuotas kietumo nustatymas: vartotojo sukurtas bandymas,
susidedantis iš kelių sekų ir mėginių, atliekamas be žmogaus įsikišimo
(pvz., 60 sekų 8 skirtingiems mėginiams vieno bandymo metu)
Fully automatic hardness testing: several progessions and
samples are created and completed „unmanned“
(i.e. 60 progressions on 8 diff erent samples in one test run)
Atstumai tarp matavimo taškų parenkami automatiškai, laikantis minimalaus
nustatyto norminio atstumo. Taip gaunami dar tikslesni bandymo rezultatai.
The distances of test points are automatically set to minimum norm dis-
tance for more accurate execution of test results.
Time-saving test mode ‘Complete all indentations – then
evaluate’ and ‘Optimum Stop’ to complete test series as soon
as the lower hardness limit has been undercut.
Time-saving test mode ‘Complete all indentations – then
evaluate’ and ‘Optimum Stop’ to complete test series as soon
as the lower hardness limit has been undercut.
Naudojant Paviršiaus įspaudo atpažinimo (Surface-Impression-Recognition)
technologiją, sumažinamas mėginio paruošimo poreikis tais atvejais, kai kietu-
mas matuojamas «ne ant optimalių» paviršių. Taigi, automatinis įspaudo atpaži-
nimas gali būti naudojamas ir ant kritinių paviršių (šlifuotų, išėsdintų)
The adjustable surface indentation recognition function reduces the requi-
red eff ort of sample preparation for testing the hardness of non-optimum
surfaces. Hence, automatic indentation recognition is also possible on
critical surfaces (etching, grinding...).
MORE ACCURATE HARDNESS RESULTS RAPIDLY
Dar daugiau tikslių kietumo matavimų akimirksniu
OPTIMUM STOPOPTIMUM STOP
1 2 3
10
Optional software module „Plane hardness chart“ is the perfect aid for the detailed securing of plane chart
over the total cross section especially of heat treated samples. Already extremely important in material ex-
ploring, further with testing of weldings and last but not least in damage analysis.
The optional software module „Plane hardness chart“ is the perfect aid for the detailed securing of the
hardness distribution over the total cross section, especially of heat treated samples. This is extremely im-
portant in material exploration, and also for weld testing or in damage analysis.
Create areaCreate area
Defi ne gridDefi ne grid
Display in 2D or 3DDisplay in 2D or 3D
FURTHER APPLICATION / FURTHER APPLICATION
Homogene plane hardness chart on wire cross sectio
Homogenous plane hardness chart on wire cross section
Transparent hardness chart in3D on a welded sampleTransparent hardness chart in 3D on a welded sample
Test point sample on a non bed-ded specimenTest point pattern on a non- bedded specimen
View in 3D or 2D View in 3D or 2D
PLANE HARDNESS CHART
Plane hardness chart
OPTION
21
11
Qpix CONTROL plug-in module: universal bi-directional data interface for order management. The hardness tester gets all order data
and test plans fully automatical. After the test run these are added with results and returned to the order management system. File im-
port and export is confi gurable freely and therefor adaptable individually.
For example order data and test plans can be loaded
directly from a central system by means of a bar code
scanner. So wrong inputs can be avoided.
Order data and test plans can be loaded directly from a
central system by means of a bar code scanner. So that
incorrect input can be avoided.
TEST DATA IMPORT AND EXPORTTEST DATA IMPORT AND EXPORT
FLEXIBLE DATA CONNECTION IN DATA BASE SYSTEMFLEXIBLE DATA CONNECTION IN DATA BASE SYSTEM
Extension Module Extension Module
Hardness TesterHardness TesterSample data, measurement results
Sample data, measurement results
ERP-systems Data base
ERP systemsData base
Qpix CONTROL plug-in module: universal bi-directional data interface for order management. The hardness tester collects all order
data and test plans fully automatically. After the test the data is added with results and returned to the order management system.
File import and export is freely confi gurable and individually adaptable.
Import fi le: Order data (XML, TXT)Import fi le:
Order data (XML, TXT)
Export fi le: Measurement results, Order data (XML, TXT)
Export fi le: Measurement results, Order data (XML, TXT)
Sample
data,
patte
rn
Sample
data,
patte
rn
Process slip, QR-code, BarcodeProcess sheet, QR-code, Barcode
DATA CONNECTION / DATA EXCHANGE
Data connection / data exchange
OPTION
12
1 2 3
Best orientation by simulatenous macro and micro view. Ideal for welding test or test point
positioning. Based to the grafi c display test points can be positioned acc. to norm.
Optimum orientation via simultaneous macro and micro view. Ideal for welding test or
test point positioning. Test points can be norm-positioned based on the graphic pre-
sentation.
Scan sample with sample image cameraScan sample with sample image camera
Sample image is assembledSample image is assembled
The sample image can be schown on a 2nd monitor oe incuded into a test report
The sample image can be shown
on a 2nd monitor or included into a
test report
OVERVIEW IN LARGE FORMAT
Overvie in large format
DoubleView-Technic
OPTION
13
Full automation perfected.
Full automation in perfection.
14
2 31
Bandymai, tokie kaip šoninis danties bandymas, kurių matavimo
taškams aprašyti reikia daug laiko, gali būti atliekami kur kas
sparčiau pasitelkus iš anksto parengtus šablonus. Naudojant
Q30A+ visi standartiniai nustatymai HV30 ir HV0,5 gali būti atvaiz-
duoti vienu prietaisu. Žinoma, programa išsaugo atitinkamą atas-
kaitą. Nustatymai gali būti koreguojami pagal vartotojo poreikius.
The time-consuming creation of test points, especially with tooth
fl ank testing, is minimized by means of pre-defi ned test templates.
With the Q30A+ the entire normed procedure between HV30 and
HV0,5 can be done by one single device. Certainly a correspon-
ding report is stored. The report can be adapted to customer
specifi cation.
- Ideali pasikartojantiems bandymams / komponentams
- Matavimo taškų sluoksnių derinimas vykdomas tiesiai ant
mėginio naudojant pagalbines linijas ir žymes
- Netgi nenaudojant „numatyto stabdymo“ funkcijos ar
mėginių laikiklio
- Mėginio vaizdas gali būti naudojamas bandymo ataskaitoje
- Ideal for repeated tests / components
- Alignment of „test point layers“ directly on the
work piece with reference lines and bench marks
- No „fi x stop“ or sample holder needed
- The sample image can be used in the test report
Matavimo taškų lygmuoTest point layer
Mėginio vizualizavimo kamera (A+ mo-delis) apžvalgos laukas 43 x 54 mmSample image camera (variant A+)fi eld of view 43 x 54 mm
Dėl unikalaus, itin dinamiško revolverio dizaino, įrenginiu
galima matuoti įvairaus aukščio mėginius.
Due to the unique design of the ultra dynamic mea-
surement turret, samples of diff erent heights can be
positioned in the test area. The innovative CAS tech-
nology prevents collisions.
AUTOMATIC HEIGHT CONTROLAutomatic height control
ŠABLONO FUNKCIJATemplate function
ŠONINIS DANTIES BANDYMASTooth fl ank testing
PRACTICAL APPLICATIONS
Praktinis taikymas
CAS-Technic
Mapping-Technic
4 5 6
Didesnė erdvė bandymamsPagal vartotojo poreikius pritaikytas bandymo
erdvės aukštis ir gylis
Portalo sprendimas suteikia išskirtinai di-
delį poslinkio ilgį ir atveria naujas galimybes
mikro-/mažų-apkrovų kietumo bandymuose.
Extended test areaCustomer-specifi c test height and throat depth
A portal solution off ers superior large traverse
paths and opens new possibilities in micro-
/low-load-hardness testing.
Didelis aukšto tikslumo XY-bandymų stalelis su integruotomis skalėmis
Large high-precision XY-test slide with glass scales
Ašių ilgis / Stroke axisX 300 / Y 150mm
Visi bandymo taškai gali būti indentifi kuojami
atskirai ar pagal vartotojo pasirinktus kriterijus.
Identifi kavimas pateikiamas matavimo verčių
sąraše ir bandymo protokole. Tai - svarbi
funkcija vėlesnei analizei.
All test points can be identifi ed individu-
ally or to customer specifi cs. The label is
shown in the test result list and in the test
protocol. This is an important function for
later analyses.
ATSKIRŲ BANDYMO TAŠKŲ IDENTIFIKAVIMASIdentifi cation of single test points
The clear big and steady designed test room
creates universitality. Further to that direct
clamping of samples in vices reduces sample
preparation eff ort and extends operational area
of future test work.
The large, clearly-structured and robustly
designed test area allows the machine to per-
form a wider range of tests. In addition to that
direct clamping of samples in vices reduces
sample preparation and extends the operatio-
nal area for future test work.
APPLICATION VICEApplication vice
For evaluating the Klc value measure the 4
crack-lines acc. to standard. After that the
MPa√m value is evaluated
Automatically.
For evaluating the K1C value the 4
cracks are measured according to the
norm. After that the MPa√m value is
evaluated automatically.
CRACK LENGTHMEASUREMENTCrack length measurement
PRACTICAL APPLICATIONS
Praktinis taikymas
OPTION
OPTION
OPTION
SPECIFIC
The Verder Scientific brands
Qness GmbH
Reitbauernweg 26
5440 Golling, Austria
+43 6244 34393
www.qness.at
Bandymo apkrovos ribos / Test force rangeišplėtinės bandymo apkrovos ribos / with test force extension
50 g - 10 kg (0,49 - 98,1 N)
0,25 g - 10 kg (0,00245 - 98,1 N)
100 g - 31,25 kg (0,98 - 306,6 N)
0,25 g - 31,25 kg (0,00245 - 306,6 N)
200 g - 62,5 kg (1,96 - 613,1 N)
0,25 g - 62,5 kg (0,00245 - 613,1 N)
Revolveris / Tool changer 6 pozicijų, motorinis / 6-fold, motorized
Programinė įranga / Software
Bandymo platforma/Kryžminis stalelis / Test anvil/Cross slide
Ø 100 mm motorinis / motorized Ø 100 mm motorinis / motorized Ø 100 mm motorinis / motorized
Poslinkio kelias X/Y/Z / Traverse path X/Y/Z Z 145 mm X 150 / Y 150 / Z 145 mm Z 145 mm X 150 / Y 150 / Z 145 mm Z 145 mm X 150 / Y 150 / Z 145 mm
Bazinio įrenginio svoris / Weight of basic machine 52 kg 58 kg 58 kg 52 kg 58 kg 58 kg 52 kg 58 kg 58 kg
Duomenų sąsaja / Data interface3x USB, 1x Ethernet, 1x RS232
1x USB3.0: InterfacePC-Hardness tester / Inter-face PC-Hardness tester
3x USB, 1x Ethernet, 1x RS232
1x USB3.0: InterfacePC-Hardness tester / Interface PC-Hardness tester
3x USB, 1x Ethernet, 1x RS232
1x USB3.0: InterfacePC-Hardness tester / Inter-face PC-Hardness tester
Mėginio vizualizavimo kamera / Sample image
camera- - Taip / Yes - - Taip / Yes - - Taip / Yes
Camera system / Camera system18 MP color camera/ 18 MP color camera
18 MP color camera
18 MP color camera / 18 MP color camera
18 MP color camera
18 MP color camera/ 18 MP color camera
18 MP color camera
Maks. mėginio aukštis / Max. work piece weight 50 kg
Maitinimo šaltinis / Power supply 230~1/N/PE, 110~1/N/PE
Maks. energijos suvartojimas / Max. power consumption ~ 200 W
PRIEDAI IR PAPILDOMI PASIRINKIMAI / Accessories and options
Bendri priedai / GeneralObjektyvai (2.5x, 4x, 10x, 20x, 40x, 65x, 100x), Indentoriai (Vickers, Knoop, Brinell)
Lenses (2.5x, 4x, 10x, 20x, 40x, 65x, 100x), Penetrators (Vickers, Knoop, Brinell)
Mėginio laikiklis / Sample holder 1 pozicijos, 4 pozicijų (Ø 30 / 40 / 50 mm), 8-fold (Ø 30 / 40 mm) / 1-fold, 4-fold (Ø 30 / 40 / 50 mm), 8-fold (Ø 30 / 40 mm)
Kryžminis stalelis / Cross anvilrankinis / manual *
X 300 x Y 150 mmrankinis / manual *
X 300 x Y 150 mmrankinis / manual *
X 300 x Y 150 mm
*Matmenys 150 x 150mm Poslinkio kelias X 25 x Y 25 naudojant analoginį ar skaitmeninį mikrometrą / Dimensions 150 x 150 mm Traverse path X 25 / Y 25 / Z 125 mm via analog or digital micrometer
08/2018 Galimi techninių duomenų pakeitimai ir spausdinimo klaidos.Subject to technical changes and print errors.
M versionM version
A/A+ versionA/A+ version
Additional modules and accessories can be viewed using the online product confi gurator at www.qness.atAdditional modules and accessories can be viewed using the online product confi gurator at www.qness.at
UAB „Nano Vita“
Rygos st. 6-4,
LT-05270 Vilnius
Lithuania
Tel.: +370 5 260 2677
Fax.: +370 5 260 2308
Mob. +370 64 574 220
www.nanovita.lt