mil control valve specification and sizing calculation

Trade names are for reference only. MIL reserves right to supply similar material MIL-FM-040R1

CONTROL VALVE SPECIFICATION SHEETCustomer: THERMAX LTD PUNE B&H Enquiry Ref: PA-0891. (1*53 TPH, 67Ata,

490±5°C).Project: Bombay rayon & Fashions

LtdService: Feed water control valve Valve & Aux Equip Code : 37-41621 AS/EPP/PT/AL/HW

Quotation Ref: MIL/QDP074/JA0637 Sale Order Ref:Item: 1 Qty: 1 Tag No: FV-500A

Valve Body

Series : 41000Type : Heavy Duty GlobeValve Size : 3 InchMax Pressure : 102 kgf/cm2 gMax temp. : 130 Deg. CBody Material : ASTM A 216 Gr. WCCBody Rating : 1500# ANSIFlow Direction : Flow-to-CloseEnd Connection : Weld End 1500 # Butt WeldBonnet Type : Standard (With Mod. Finned Extn.)Packing Type : DoublePacking Matl. : PTFE

Valve Trim

Rated Cv : 56Characteristic : Equal %Plug Type : Balanced with PTFE SealPlug Material : 17-4 PHCage Type : Standard CharacterisedCage Material : CA6NM NitridedSeat Type : ClampedSeat Material : SS 410Guiding : Cage GuidingSeat leakage : IV (FCI 70.2)

Spring Diaphragm Actuator

Series/Size : 37/18 InchSpring Range : 3-15 psiSupply Pressure : 35 psiAction : Air to CloseAir failure : StayputHand Wheel : 6A3Pn.tubing Size/Mtl. : 3/8 Inch NPT/ CopperShut-off Pressure : 102 kgf/cm2 g

IBR

IBR for Pressure Parts : Yes

Line Data

Inlet Pipe : 4 (In ) / 80 SchOutlet Pipe : 4 (In ) / 80 Sch

Air Filter Regulator with Gauge

Make/Model : Shavo /11-4 SNQty : 1Filter Size : 5 Micron

Valve Positioner

Make/Model : MIL /8013Input Signal/Action : 4-20 mA /DirectCertification : Weather Proof IP 65 (IS 2147)Cable Entry : 1/2 Inch NPTCable Gland : No

Position Transmitter

Make/Model/Output

Signal

: MIL /400 L /4-20 mA

Supply Voltage : 12-33 V DCCertification : Weather Proof IP 65 (IS

2147)Cable Entry : 1/2 Inch NPTCable Gland : No

Air Lock

Make/Model : MIL /776

Revision No: 0

Revision Date: 16-May-08 Prepared By: AJ

CONTROL VALVE SIZING CALCULATIONS

Customer: THERMAX LTD PUNE B&HEnquiry Ref: PA-0891. (1*53 TPH, 67Ata, 490±5°C).Project: Bombay rayon & Fashions LtdTag: FV-500A

Quotation Ref: MIL/QDP074/JA0637Item: 1 Service: Feed water control valveDate: 16-May-08

General Details

Valve Model: 41000 FTCValve Size: 3 InBody Material: ASTM A 216 Gr. WCCBody Rating: 1500 # ANSI Rated Cv: 56

Inlet Pipe 4 In/ 80 SchOutlet Pipe 4 In/ 80 SchFluid Type: LiquidFluid Name: WaterCharacteristic: Equal %

Service Conditions

Sizing Condition Units Max Nor Min

Flow Rate T/hr 61.02 50.85 15.90

Inlet Pressure kgf/cm2 g 83.84 87.35 93.47

Outlet Pressure kgf/cm2 g 78.35 75.33 69.14

Pressure Drop kgf/cm2 5.49 12.02 24.33

Temperature deg. c 130 130 130

Vapour Pressure kgf/cm2 a 2.76 2.76 2.76

Critical Pressure kgf/cm2 a 225 225 225

Spec.Gravity 0.93486 0.93486 0.93486

Viscosity cPo 1 1 1

Sizing Results

Calculated Cv 31.55 17.769 3.905

FL 0.919 0.93 0.94

Velocity m/s 4.4 3.7 1.2

Sound Level dBA 67.3 71.6 71.1

Flow Cond subcrit. subcrit. subcrit.

% lift Equal % 85.4 70.8 32.2

MIL-SIZING-C2

THERMAX LTD PUNE

PA-0891. (1*53 TPH, 67Ata, 490±5°C).

1

FV-500A

AJ

1

MIL/QDP074/JA0637

3 Inch

1500 #

BW

0

18 Inch

N.A

16-May-08

37-41621Flow-to-Close

Stayput

Yes

290

Estimated Shipping Weight (Kg.)

OD(A)= 88.9 ID(B)= 73.7 OD(A)= 88.9 ID(B)= 73.7

Air SetAS

Electro Pneu.PositionerVP

Position TransmitterPT

AirLockAL

Hand WheelHW




LtdService: Feed water 100% motorized

control valve Valve & Aux Equip Code : 90-41621

Quotation Ref: MIL/QDP074/JA0637 Sale Order Ref:Item: 2 Qty: 1 Tag No: FV-M503

Valve Body

Series : 41000Type : Heavy Duty GlobeValve Size : 3 InchMax Pressure : 102 kgf/cm2 gMax temp. : 130 Deg. CBody Material : ASTM A 216 Gr. WCCBody Rating : 1500# ANSIFlow Direction : Flow-to-CloseEnd Connection : Weld End 1500 # Butt WeldBonnet Type : Standard (With Mod. Finned Extn.)Packing Type : DoublePacking Matl. : PTFE

Valve Trim

Rated Cv : 56Characteristic : Equal %Plug Type : Balanced with PTFE SealPlug Material : 17-4 PHCage Type : Standard CharacterisedCage Material : CA6NM NitridedSeat Type : ClampedSeat Material : SS 410Guiding : Cage GuidingSeat leakage : IV (FCI 70.2)

IBR


Line Data


Electrical Actuator

Series : 90Make/Model : Rotork/KML60F10A/18Supply Voltage : 3 F, 415V, AC50HzTravel : 2 InchShut-off Pressure : 102 kgf/cm2 gFor electrical actuator specification please refer

Annexure

Revision No: 0



Customer: THERMAX LTD PUNE B&HEnquiry Ref: PA-0891. (1*53 TPH, 67Ata, 490±5°C).Project: Bombay rayon & Fashions LtdTag: FV-M503

Quotation Ref: MIL/QDP074/JA0637Item: 2

Service: Feed water 100% motorized control valve

Date: 16-May-08

General Details

Valve Model: 41000 FTCValve Size: 3 InBody Material: ASTM A 216 Gr. WCCBody Rating: 1500 # ANSI Rated Cv: 56


Service Conditions


Flow Rate T/hr 61.02 50.85 15.90






Critical Pressure kgf/cm2 a 225.6 225.6 225.6

Spec.Gravity 0.935 0.935 0.935

Viscosity cPo 1 1 1

Sizing Results

Calculated Cv 31.548 17.767 3.905

FL 0.919 0.93 0.94




% lift Equal % 85.4 70.8 32.2

MIL-SIZING-C2

VM/SRQ08-5056/MIL dt.17.05.08

Specification for KML range actuators:

Type : Syncroset actuator (without integral starter) Enclosure : Water Tight to IP68. Power supply : 415V ; 3 Phase ; 50Hz. Wiring Diagram : Wd: 9235 Mechanical local Indicator : Continuous Local Indicator ProvidedMotor Insulation : Class “F”Paint : Smoke grey as per IS 5, 692 shade

Modulating duty i.e 1200 starts per hour WD: 9235

Sl.No.

Actuator / RPM

Mod. Thrust (lbs)

SeatingThrust (lbs)

Linear Speed (mm/sec)

Travel Time (secs)

1 KML60F10A/18 2580 4060 1.8 28

Stroke length-2” for sl.no1

Note:

1) Offered above actuators are Syncroset (without integral starter) actuator quoted to wiring diagram WD: 9235 + CLI, which consists of the following.

2 Nos Torque/Limit switches with 2NO + 2 NC potential free contacts. 2 Nos Auxiliary Limit switches with 2NO +2NC Potential free contacts, 2 Nos Independent Limit switches with 2NO +2NC potential free contacts, Space heater suitable for 230V AC / Single phase externally fed Power Supply, Continuous Local Indicator and Contact type Current Position Transmitter (4-20mA)

2) Offered actuators are provided with 1 ¼” – 1No, ¾” – 2 Nos British metric double compression cable glands as required. Please confirm.

3) Offered actuators are with out integral starter.

VENDOR NAME : ROTORK / DATA SHEET REF: 01 / REV. 00 / DT: 17.05.2008 PROJECT NAME : TAG NO. : MIL WORK NO. : VALVE : OUR JOB NO. :

ACTUATOR MODEL: KML60F10A /18 RPM STROKE LENGTH : 2”Linear speed: 1.8 mm/secs

S.No DESCRIPTION UNIT DATA 1 ACTUATOR MANUFACTURER ROTORK CONTROLS (INDIA) PVT. LTD

2A MODULATING THRUST lbs 2580 2B SEATING THRUST lbs 4060 3 DUTY CYCLE S4-50% 4 ENCLOSURE (TENV) IP68 5 AVERAGE / NOMINAL OUTPUT KW 0.25 6 RATED VOLTAGE V 415 7 RATED FREQUENCY Hz 508 No .OF PHASES 39 ADMISSIBLE VOLTAGE FLUCTUATION % 10

10 ADMISSIBLE FREQUENCY FLUCTUATION % 511 ADMISSIBLE VOLT. & FREQ. VARIATION % 10 12 NOMINAL MODULATING CURRENT A 1.2 13 LOCKED ROTOR CURRENT A 3.0 14 FULL LOAD SPEED RPM 2880 15 INSULATION CLASS F16 POWER FACTOR (AVERAGE LOAD) 0.79 17 AVERAGE LOAD EFFICIENCY % 5018 ADMISSIBLE AMBIENT TEMPERATURE C -30 TO +70 19 TEMP.RAISE OVER AMBIENT TEMP 40 C C 8020 TYPE OF STARTER RECOMMENDED DOL 21 CABLE GLANDS 4 Nos. 1 ¼ “ – 1No, ¾” – 2 Nos cable glands-

British metric22 GEAR BOX LUBRICATION ALPHA SP68 or SAE EP80 23 POSITION LIMIT SWITCHES Nos 2NO 2NC – 4 Nos. 24 TORQUE SWITCHES Nos 2NO 2NC – 2 Nos. 25 RATING OF SWITCHES A 5A 240V AC, 0.5A 220V DC

26.A POSITION TRANSMITTER - ON / OFF DUTY NOT APPLICABLE 26.B POSITION TRANSMITTER - INCHING DUTY (IF

PROVIDED)Contact type Current position transmitter (4-20mA)

27 SPACE HEATER 1 No 240V AC 1 50 Hz 28 THERMOSTAT / THERMISTER 1 No PROVIDED 29 INTERNAL WIRING PVC 1.5 mm2

30 CONTROL CIRCUIT DIAGRAM (WITHOUT INTEGRAL STARTER)

WD: 9235

31 WEIGHT Kg 4632 MOTOR SUITABLE FOR ON-OFF / INCHING Modulating duty (1200 starts per hour) 33 MOTOR TYPE & REF. STANDARD SQUIRREL CAGE INDUCTION, IS 325 34 TRAVEL TIMES Sec 28 secs

NAME SEAL OF VENDOR WITH SIGNATURE.




LtdService: Feed water 30% control

valve Valve & Aux Equip Code : 37-41121 AS/EPP/PT/AL/HW

Quotation Ref: MIL/QDP074/JA0637 Sale Order Ref:Item: 3 Qty: 1 Tag No: FV-500B

Valve Body

Series : 41100Type : Heavy Duty GlobeValve Size : 1.5 InchMax Pressure : 102 kgf/cm2 gMax temp. : 130 Deg. CBody Material : ASTM A 216 Gr. WCCBody Rating : 900# ANSIFlow Direction : Flow-to-OpenEnd Connection : Weld End 900 # Butt WeldBonnet Type : StandardPacking Type : DoublePacking Matl. : PTFE

Valve Trim

Rated Cv : 10Characteristic : Equal %Plug Type : UnbalancedPlug Material : 17-4 PHCage Type : Standard CharacterisedCage Material : CA6NM NitridedSeat Type : ClampedSeat Material : SS 410Guiding : Cage GuidingSeat leakage : IV (FCI 70.2)



IBR


Line Data




Valve Positioner



Make/Model/Output

Signal

: MIL /400 L /4-20 mA



Air Lock


RemarksThis valve shall be able to withstand Delta Pressure shut off during startups without damage-Duration 8 to 10 hours for 25 to 30 times in a year.

Revision No: 0



Customer: THERMAX LTD PUNE B&HEnquiry Ref: PA-0891. (1*53 TPH, 67Ata, 490±5°C).Project: Bombay rayon & Fashions LtdTag: FV-500B


Service: Feed water 30% control valve

Date: 16-May-08

General Details

Valve Model: 41100 FTOValve Size: 1.5 InBody Material: ASTM A 216 Gr. WCCBody Rating: 900 # ANSI Rated Cv: 10


Service Conditions


Flow Rate T/hr 17.49 15.9 4.77







Spec.Gravity 0.93486 0.93486 0.93486

Viscosity cPo 1 1 1

Sizing Results

Calculated Cv 4.487 4.007 1.15

FL 0.924 0.926 0.939

Velocity m/s 5 4.6 1.4



% lift Equal % 79.6 76.6 45

MIL-SIZING-C2

THERMAX LTD PUNE

PA-0891. (1*53 TPH, 67Ata, 490±5°C).

3

FV-500B

AJ

1

MIL/QDP074/JA0637

1.5 Inch

900 #

BW

0

13 Inch

N.A

16-May-08

37-41121Flow-to-Open

Stayput

Yes

140


OD(A)= 48.3 ID(B)= 38.1 OD(A)= 48.3 ID(B)= 38.1

Air SetAS



AirLockAL

Hand WheelHW




LtdService: Attemperator control valve Valve & Aux Equip Code : 37-41121 AS/EPP/PT/AL/HW

Quotation Ref: MIL/QDP074/JA0637 Sale Order Ref:Item: 4 Qty: 1 Tag No: TV-603

Valve Body

Series : 41100Type : Heavy Duty GlobeValve Size : 1 InchMax Pressure : 102 kgf/cm2 gMax temp. : 130 Deg. CBody Material : ASTM A 216 Gr. WCCBody Rating : 900# ANSIFlow Direction : Flow-to-OpenEnd Connection : Weld End 900 # Socket WeldBonnet Type : StandardPacking Type : DoublePacking Matl. : PTFE

Valve Trim




IBR


Line Data

Inlet Pipe : 1.5 (In ) / 80 SchOutlet Pipe : 1.5 (In ) / 80 Sch



Valve Positioner



Make/Model/Output

Signal

: MIL /400 L /4-20 mA



Air Lock


Revision No: 0



Customer: THERMAX LTD PUNE B&HEnquiry Ref: PA-0891. (1*53 TPH, 67Ata, 490±5°C).Project: Bombay rayon & Fashions LtdTag: TV-603

Quotation Ref: MIL/QDP074/JA0637Item: 4 Service: Attemperator control valveDate: 16-May-08

General Details

Valve Model: 41100 FTOValve Size: 1 InBody Material: ASTM A 216 Gr. WCCBody Rating: 900 # ANSI Rated Cv: 10

Inlet Pipe 1.5 In/ 80 SchOutlet Pipe 1.5 In/ 80 SchFluid Type: LiquidFluid Name: WaterCharacteristic: Equal %

Service Conditions


Flow Rate T/hr 4.38 2.15 0.44







Spec.Gravity 0.93486 0.93486 0.93486

Viscosity cPo 1 1 1

Sizing Results

Calculated Cv 3.888 1.638 0.346

FL 0.926 0.937 0.94


Sound Level dBA 55.8 54.7 <50


% lift Equal % 75.9 53.9 14.4

MIL-SIZING-C2

THERMAX LTD PUNE

PA-0891. (1*53 TPH, 67Ata, 490±5°C).

4

TV-603

AJ

1

MIL/QDP074/JA0637

1 Inch

900 #

SW

0

13 Inch

N.A

16-May-08


Stayput

Yes

80


OD(A)= 34.1 ID(B)= 24.3 D= 13 OD(A)= 34.1 ID(B)= 24.3 D= 13

Air SetAS



AirLockAL

Hand WheelHW




LtdService: Attemperator motorized

control valve Valve & Aux Equip Code : 90-41121

Quotation Ref: MIL/QDP074/JA0637 Sale Order Ref:Item: 5 Qty: 1 Tag No: TV-M504

Valve Body

Series : 41100Type : Heavy Duty GlobeValve Size : 1 InchMax Pressure : 102 kgf/cm2 gMax temp. : 130 Deg. CBody Material : ASTM A 216 Gr. WCCBody Rating : 900# ANSIFlow Direction : Flow-to-OpenEnd Connection : Weld End 900 # Socket WeldBonnet Type : StandardPacking Type : DoublePacking Matl. : PTFE

Valve Trim


IBR


Line Data

Inlet Pipe : 1.5 (In ) / 80 SchOutlet Pipe : 1.5 (In ) / 80 Sch

Electrical Actuator

Series : 90Make/Model : Rotork/KML30F10A/18Supply Voltage : 3 F, 415V, AC50HzTravel : 0.75 InchShut-off Pressure : 102 kgf/cm2 gFor electrical actuator specification please refer

Annexure

Revision No: 0



Customer: THERMAX LTD PUNE B&HEnquiry Ref: PA-0891. (1*53 TPH, 67Ata, 490±5°C).Project: Bombay rayon & Fashions LtdTag: TV-M504


Service: Attemperator motorized control valve

Date: 16-May-08

General Details


Inlet Pipe 1.5 In/ 80 SchOutlet Pipe 1.5 In/ 80 SchFluid Type: LiquidFluid Name: WaterCharacteristic: Equal %

Service Conditions


Flow Rate T/hr 4.38 2.15 0.44







Spec.Gravity 0.93486 0.93486 0.93486

Viscosity cPo 1 1 1

Sizing Results

Calculated Cv 3.888 1.638 0.346

FL 0.926 0.937 0.94


Sound Level dBA 55.8 54.7 <50


% lift Equal % 75.9 53.9 14.4

MIL-SIZING-C2

VM/SRQ08-5056/MIL dt.17.05.08

Specification for KML range actuators:

Type : Syncroset actuator (without integral starter) Enclosure : Water Tight to IP68. Power supply : 415V ; 3 Phase ; 50Hz. Wiring Diagram : Wd: 9235 Mechanical local Indicator : Continuous Local Indicator ProvidedMotor Insulation : Class “F”Paint : Smoke grey as per IS 5, 692 shade

Modulating duty i.e 1200 starts per hour WD: 9235

Sl.No.

Actuator / RPM

Mod. Thrust (lbs)

SeatingThrust (lbs)

Linear Speed (mm/sec)

Travel Time (secs)

2 KML30F10A /18 1620 2500 1.8 10.58

Stroke length-0.75” for sl.no2

Note:

1) Offered above actuators are Syncroset (without integral starter) actuator quoted to wiring diagram WD: 9235 + CLI, which consists of the following.

2 Nos Torque/Limit switches with 2NO + 2 NC potential free contacts. 2 Nos Auxiliary Limit switches with 2NO +2NC Potential free contacts, 2 Nos Independent Limit switches with 2NO +2NC potential free contacts, Space heater suitable for 230V AC / Single phase externally fed Power Supply, Continuous Local Indicator and Contact type Current Position Transmitter (4-20mA)

2) Offered actuators are provided with 1 ¼” – 1No, ¾” – 2 Nos British metric double compression cable glands as required. Please confirm.

3) Offered actuators are with out integral starter.

VENDOR NAME : ROTORK / DATA SHEET REF: 01 / REV. 00 / DT: 17.05.2008 PROJECT NAME : TAG NO. : MIL WORK NO. : VALVE : OUR JOB NO. :

ACTUATOR MODEL: KML30F10A /18 RPM STROKE LENGTH : 0.75”Linear speed: 1.8 mm/secs

S.No DESCRIPTION UNIT DATA 1 ACTUATOR MANUFACTURER ROTORK CONTROLS (INDIA) PVT. LTD

2A MODULATING THRUST lbs 1620 2B SEATING THRUST lbs 2500 3 DUTY CYCLE S4-50% 4 ENCLOSURE (TENV) IP68 5 AVERAGE / NOMINAL OUTPUT KW 0.23 6 RATED VOLTAGE V 415 7 RATED FREQUENCY Hz 508 No .OF PHASES 39 ADMISSIBLE VOLTAGE FLUCTUATION % 10

10 ADMISSIBLE FREQUENCY FLUCTUATION % 511 ADMISSIBLE VOLT. & FREQ. VARIATION % 10 12 NOMINAL MODULATING CURRENT A 0.8 13 LOCKED ROTOR CURRENT A 3.0 14 FULL LOAD SPEED RPM 2880 15 INSULATION CLASS F16 POWER FACTOR (AVERAGE LOAD) 0.80 17 AVERAGE LOAD EFFICIENCY % 5018 ADMISSIBLE AMBIENT TEMPERATURE C -30 TO +70 19 TEMP.RAISE OVER AMBIENT TEMP 40 C C 8020 TYPE OF STARTER RECOMMENDED DOL 21 CABLE GLANDS 4 Nos. 1 ¼ “ – 1Nos, ¾” – 2 Nos cable glands-

British metric22 GEAR BOX LUBRICATION ALPHA SP68 or SAE EP80 23 POSITION LIMIT SWITCHES Nos 2NO 2NC – 4 Nos. 24 TORQUE SWITCHES Nos 2NO 2NC – 2 Nos. 25 RATING OF SWITCHES A 5A 240V AC, 0.5A 220V DC

26.A POSITION TRANSMITTER - ON / OFF DUTY NOT APPLICABLE 26.B POSITION TRANSMITTER - INCHING DUTY (IF

PROVIDED)Contact type Current position transmitter (4-20mA)

27 SPACE HEATER 1 No 240V AC 1 50 Hz 28 THERMOSTAT / THERMISTER 1 No PROVIDED 29 INTERNAL WIRING PVC 1.5 mm2

30 CONTROL CIRCUIT DIAGRAM (WITHOUT INTEGRAL STARTER)

WD: 9235

31 WEIGHT Kg 4232 MOTOR SUITABLE FOR ON-OFF / INCHING Modulating duty (1200 starts per hour) 33 MOTOR TYPE & REF. STANDARD SQUIRREL CAGE INDUCTION, IS 325 34 TRAVEL TIMES Sec 11 secs

NAME SEAL OF VENDOR WITH SIGNATURE.




LtdService: Dearator level control valve

(make-up)Valve & Aux Equip Code : 37-21125 AS/EPP/PT/AL/HW

Quotation Ref: MIL/QDP074/JA0637 Sale Order Ref:Item: 6 Qty: 1 Tag No: LV-001

Valve Body

Series : 21000Type : Single Seated GlobeValve Size : 2 InchMax Pressure : 5 kgf/cm2 gMax temp. : 30 Deg. CBody Material : ASTM A 216 Gr. WCCBody Rating : 150# ANSIFlow Direction : Flow-to-OpenEnd Connection : Flanged -ANSI 150 # RFFace finish : Spiral 250-500 AARHBonnet Type : StandardPacking Type : DoublePacking Matl. : PTFE

Valve Trim

Rated Cv : 46Characteristic : Equal %Plug Type : ContouredPlug Material : SS 410Seat Type : ThreadedSeat Material : SS 410Guiding : Heavy Top GuidingGuide Bush Mtl. : SS 440C Seat leakage : IV (FCI 70.2)



IBR

IBR for Pressure Parts : No

Line Data




Valve Positioner



Make/Model/Output

Signal

: MIL /400 L /4-20 mA



Air Lock


Revision No: 0



Customer: THERMAX LTD PUNE B&HEnquiry Ref: PA-0891. (1*53 TPH, 67Ata, 490±5°C).Project: Bombay rayon & Fashions LtdTag: LV-001


Service: Dearator level control valve(make-up)

Date: 16-May-08

General Details



Service Conditions


Flow Rate Kg/hr 17875 16250 1787







Spec.Gravity 0.995 0.995 0.995

Viscosity cPo 1 1 1

Sizing Results

Calculated Cv 28.833 20.821 1.396

FL 0.926 0.938 0.984




% lift Equal % 77.5 68.7 11

MIL-SIZING-C3

THERMAX LTD PUNE

PA-0891. (1*53 TPH, 67Ata, 490±5°C).

6

LV-001

AJ

1

MIL/QDP074/JA0637

2 Inch

150 #

RF

0

11 Inch

Spiral 250-500 AARH

16-May-08


Stayput

No

90


Air SetAS



AirLockAL

Hand WheelHW




LtdService: Dearator pressure control

valve Valve & Aux Equip Code : 38-21125 AS/EPP/PT/AL/HW

Quotation Ref: MIL/QDP074/JA0637 Sale Order Ref:Item: 7 Qty: 1 Tag No: PV-604

Valve Body

Series : 21000Type : Single Seated GlobeValve Size : 4 InchMax Pressure : 10 kgf/cm2 gMax temp. : 180 Deg. CBody Material : ASTM A 216 Gr. WCCBody Rating : 150# ANSIFlow Direction : Flow-to-OpenEnd Connection : Flanged -ANSI 150 # RFFace finish : Spiral 250-500 AARHBonnet Type : StandardPacking Type : DoublePacking Matl. : Graphite

Valve Trim

Rated Cv : 195Characteristic : Equal %Plug Type : ContouredPlug Material : SS 410Seat Type : ThreadedSeat Material : SS 410Guiding : Heavy Top GuidingGuide Bush Mtl. : SS 440C Seat leakage : IV (FCI 70.2)


Series/Size : 38/15 InchSpring Range : 12-30 psiSupply Pressure : 35 psiAction : Air to OpenAir failure : StayputHand Wheel : 6A3Pn.tubing Size/Mtl. : 1/4 Inch NPT/ CopperShut-off Pressure : 10 kgf/cm2 g

IBR


Line Data




Valve Positioner



Make/Model/Output

Signal

: MIL /400 L /4-20 mA



Air Lock


Revision No: 0



Customer: THERMAX LTD PUNE B&HEnquiry Ref: PA-0891. (1*53 TPH, 67Ata, 490±5°C).Project: Bombay rayon & Fashions LtdTag: PV-604


Service: Dearator pressure control valve

Date: 16-May-08

General Details


Inlet Pipe 6 In/ 40 SchOutlet Pipe 6 In/ 40 SchFluid Type: SteamFluid Name:Characteristic: Equal %

Service Conditions


Flow Rate kg/hr 7018 6380 702





TSH deg. c 6.29 5.21 3.92

Sizing Results

Calculated Cv 72.681 63.807 6.617

FL 0.952 0.956 0.982

Velocity(Mach) 0.306 0.298 0.036

Sound Level dBA 84.1 84.4 76

% lift Equal % 54 51.5 13.9

MIL-SIZING-C4

THERMAX LTD PUNE

PA-0891. (1*53 TPH, 67Ata, 490±5°C).

7

PV-604

AJ

1

MIL/QDP074/JA0637

4 Inch

150 #

RF

0

15 Inch

Spiral 250-500 AARH

16-May-08


Stayput

Yes

240


Air SetAS



AirLockAL

Hand WheelHW



LtdService: Startup vent control valve Valve & Aux Equip Code : 38-41412

AS/EPP/PT/AL/HW/LNP/EXP

Quotation Ref: MIL/QDP074/JA0637 Sale Order Ref:Item: 8 Qty: 1 Tag No: HV-600

Valve Body

Series : 41000Type : Heavy Duty GlobeValve Size : 3 InchMax Pressure : 106 kgf/cm2 gMax temp. : 490 Deg. CBody Material : ASTM A 217 Gr. WC9Body Rating : 1500# ANSIFlow Direction : Flow-to-CloseEnd Connection : Weld End 1500 # Butt WeldBonnet Type : Standard (With Mod. Finned Extn.)Packing Type : DoublePacking Matl. : Graphite

Valve Trim

Rated Cv : 45Characteristic : LinearPlug Type : Balanced with Pilot PlugPlug Material : CA6NM NitridedCage Type : Single Stage Anti- Cavitation / Lo-dBCage Material : CA6NM NitridedSeat Type : ClampedSeat Material : SS 316 + StelliteGuiding : Cage GuidingSeat leakage : V (FCI 70.2)


Series/Size : 38/18 InchSpring Range : 20-45 psiSupply Pressure : 55 psiAction : Air to OpenAir failure : StayputHand Wheel : 8APn.tubing Size/Mtl. : 3/8 Inch NPT/ CopperShut-off Pressure : 106 kgf/cm2 g

IBR


Line Data


Noise Control Devices

Size/cv/Sch(in)/Sch(out) : 6 Inch/156/80/80Material : ASTM A 217 Gr. WC9End Connection : Weld End



Valve Positioner



Make/Model/Output

Signal

: MIL /400 L /4-20 mA



Air Lock



Item No:8Tag No:HV-600

Expanders/Reducers

Size/Sch(In/Out) : 3 x 6 Inch/80/80End Conn. : Weld End 600 # Butt WeldFasteners : NoMaterial : ASTM A 217 Gr. WC9

SPECIFICATION SHEET Continued..

Quotation Ref: MIL/QDP074/JA0637

Revision No: 0


CALCULATION SHEET

FLUID : steamCritical Pressure: kgf/cm2 a 225.7Critical Temp. : øC 374.2

SERVICE CONDITIONS MINIMUM NORMAL MAXIMUM OTHERFlowrate : t/h 2.12 15.9 21.2Inlet Pressure : kgf/cm2 g 66.47 66.47 66.47Outlet Pressure : kgf/cm2 g 0.9057 10.92 14.89Pressure Drop : kgf/cm2 65.56 55.55 51.58Temperature : øC 490 490 490Tsh : øC 206.8 206.8 206.8G : 0.622 0.622 0.622Cp/Cv : 1.3 1.3 1.3Z : 0.9432 0.9432 0.9432Fl : 0.940 0.940 0.940Shut Off P.Drop : kgf/cm2 106

Calculated Cv : 3.861 28.96 38.61Outlet Mach : 0.211 0.298 0.298Valve SPL : dBA 72.5 83.3 82.9Lift% : linear 8.6 64.4 85.8

Total SPL : dBA 64.5 80.1 82.5Valve Mounted with 1 LO-DB Cartridge Downstream

CARTRIDGE #1Outlet Pressure : kgf/cm2 g 0.103 0.503 1 (P2)

PRODUCT TYPE : 41000 LO-DBFlow Direction : FTC Trim : -Nominal Cv : 45Rating : 1500Input Size : 3 in Output : 3 in

CARTRIDGES -Close Coupled Mounting-

MINIMUM NORMAL MAXIMUM OTHERCARTRIDGE #1Nominal Cv : 156Nominal Diameter : 150Inlet Pressure : kgf/cm2 g 0.9057 10.92 14.89Outlet Pressure : kgf/cm2 g 0.103 0.503 1Sonic Diameter : in 2.31 5.43 5.45SPL : dBA 53.3 79.8 82.4

THERMAX LTD PUNE

PA-0891. (1*53 TPH, 67Ata, 490±5°C).

8

HV-600

AJ

1

MIL/QDP074/JA0637

3 Inch

1500 #

BW

0

18 Inch

N.A

16-May-08

38-41412Flow-to-Close

Stayput

Yes

310


OD(A)= 88.9 ID(B)= 73.7 OD(A)= 168.3 ID(B)= 146.4

Air SetAS



AirLockAL

Hand WheelHW

3 x 6 In

140

6 In

148

Administrator

Line




LtdService: Dearator overflow shutoff

valve Valve & Aux Equip Code : 38-211X5 AS/LS/SV

Quotation Ref: MIL/QDP074/JA0637 Sale Order Ref:Item: 9 Qty: 1 Tag No: UV-001

Valve Body

Series : 21000Type : Single Seated GlobeValve Size : 4 InchMax Pressure : 3 kgf/cm2 gMax temp. : 130 Deg. CBody Material : ASTM A 216 Gr. WCCBody Rating : 150# ANSIFlow Direction : Flow-to-OpenEnd Connection : Flanged -ANSI 150 # RFFace finish : Spiral 250-500 AARHBonnet Type : StandardPacking Type : DoublePacking Matl. : PTFE

Valve Trim

Rated Cv : 195Characteristic : On/OffPlug Type : DiscPlug Material : SS 410Seat Type : ThreadedSeat Material : SS 410Guiding : Heavy Top GuidingGuide Bush Mtl. : SS 440C Seat leakage : V (FCI 70.2)


Series/Size : 38/15 InchSpring Range : 14-31 psiSupply Pressure : 36 psiAction : Air to OpenAir failure : ClosePn.tubing Size/Mtl. : 1/4 Inch NPT/ CopperShut-off Pressure : 3 kgf/cm2 g

IBR


Line Data




Limit Switch

Make/Model/Qty : MIL/496.2 / 1 Nos.Type : 2xSPDTMicro Switch Rating : 10A/250 VACCertification : Weather Proof IP 65 (IS 2147)Cable Entry : 1/2 Inch NPTCable Gland : NoRemarks : For open and close position

Solenoid Valve

Make/Model/Qty : Rotex / 30301-2.5-2R-B2-240 V AC-16 / 1 Nos.

Type of

Operation

: 3/2 Way Direct Acting

Action : Universal ( Energise to open)Body Material : BrassCoil Class : FWattage : 6 WSupply Voltage : 240 V ACCertification : Weather Proof IP 65 (IS 2147)Orifice : 2.5 mmCable Entry : 1/2 Inch NPTCable Gland : NoSpecial : Standard

RemarksT-adaptor shall be supplied for 2 cable entries with 1/2 in.

Revision No: 0



Customer: THERMAX LTD PUNE B&HEnquiry Ref: PA-0891. (1*53 TPH, 67Ata, 490±5°C).Project: Bombay rayon & Fashions LtdTag: UV-001


Service: Dearator overflow shutoff valve

Date: 16-May-08

General Details


Inlet Pipe 4 In/ 40 SchOutlet Pipe 4 In/ 40 SchFluid Type: LiquidFluid Name: DM waterCharacteristic: On/Off

Service Conditions


Flow Rate T/hr 83.6 76 8.36







Spec.Gravity 0.9346 0.9346 0.9346

Viscosity cPo 1 1 1

Sizing Results

Calculated Cv 91.707 81.077 8.407

FL 0.9 0.9 0.9




% lift On/Off 0 0 0

MIL-SIZING-C1

THERMAX LTD PUNE

PA-0891. (1*53 TPH, 67Ata, 490±5°C).

9

UV-001

AJ

1

MIL/QDP074/JA0637

4 Inch

150 #

RF

0

15 Inch

Spiral 250-500 AARH

16-May-08

38-211X5Flow-to-Open

Close

Yes

190


Air SetAS

Limit SwitchLS

Solenoid ValveSV

mil control valve specification and sizing calculation

Documents

critical pressure kgfcm2

vapour pressure kgfcm2

inchmax pressure

pressure parts

psisupply pressure

inlet pressure kgfcm2

mil reserves

similar material milfm