MIL-HDBK-454B

GUIDELINE 12

FASTENER HARDWARE

1. Purpose. This guideline establishes criteria for the selection and application of fastener hardware.

2. Applicable documents. The documents listed below are not necessarily all of the documents referenced herein, but are those needed to understand the information provided by this handbook.

FF-N-836 FF-R-556

FF-S-85 FF-S-86 FF-S-92 FF-S-200 FF-S-210 FF-W-84 FF-W-92 FF-W-100 MIL-DTL-1222

MIL-R-7885

MIL-DTL-18240 MIL-R-24243 A-A-59313 AIA/NAS 498 AIA/NAS 547 AIA/NAS 1686 AIA/NAS 1687 AIA/NASM5591 AIA/NASM5674 AIA/NASM6812 AIA/NASM7838 AIA/NASM8814 AIA/NASM8831

AIA/NASM22978 AIA/NASM25027 AIA/NASM27384 AIA/NASM33522

AIA/NASM33540 AIA/NASM33557 FED-STD-H28/2

ASME ASME ASME ASME ASME ASME ASME ASME ASME ASME ASTM

B1.1 B1.13M B18.2.1 B18.3 B18.6.3 B18.6.7M B18.21.1 B18.22.1 B18.24 B18.29.1 A 325

Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat. Rivet, Solid, Small; Rivet, Split, Small; Rivet Tubular, Small; Flat Washer (Burr); and Cap, Rivet; General Purpose. Screw, Cap, Slotted and Hexagon Head. Screw, Cap, Socket-Head. Screw, Machine, Slotted, Cross-Recessed or Hexagon Head. Setscrews: Hexagon Socket and Spline Socket, Headless. Setscrews: Square Head (Inch) and Slotted Headless (Inch and Metric). Washers, Lock (Spring). Washer, Flat (Plain). Washer, Lock, (Tooth). Studs, Bolts, Screws and Nuts for Applications Where A High Degree of Reliability is Required; General Specification for. Rivets, Blind, Structural, Mechanically Locked Spindle and Friction Locked Spindle, General Specification for. Fastener Element, Self-Locking, Threaded Fastener, 250 Deg. F Maximum. Rivets, Blind, Nonstructural, Retained Mandrel, General Specification for. Thread, Compound; Antiseize, Zinc Dust-Petrolatum. Fasteners, Alloy Steel Externally Threaded, 95 KSI Fsu, 450 Degrees F. Fastener; Rotary, Quick-Operating, High Strength. Rivet, Blind, Aluminum Sleeve, Mechanically Locked Spindle, Bulbed. Rivet, Blind, Monel and Inconel Sleeve, Mechanically Locked Spindle, Bulbed. Fasteners, Panel; Nonstructural. Rivets, Structural, Aluminum Alloy, Titanium Columbium Alloy, General Specification for. Fasteners, Externally Threaded Alloy Steel Corrosion Resistant Steel. Bolt, Internal Wrenching, 160 KSI FTU. Rivets, Blind, Nonstructural Type. Fasteners, Alloy Steel, 450 Degrees F Externally Threaded, 180 KSI Ftu, 108 KSI Fsu, Fatigue Rated. Fastener, Rotary, Quick-Operating, High-Strength. Nut, Self-Locking 250 Degrees F, 450 Degrees F, and 800 Degrees F. Rivet, Blind, Drive Type. Rivets, Blind, Structural, Mechanically Locked and Friction Retainer Spindle, (Reliability and Maintainability), Design and Construction Requirements for. Safety Wiring, Safety Cabling, Cotter Pinning, General Practices for. Nonstructural Rivets for Blind Attachment; Limitations for Design and Usage. Screw-Thread Standards for Federal Services, Section 2 Unified Inch Screw Threads - UN and UNR Thread Forms. Unified Inch Screw Threads (UN and UNR Thread Form). Metric Screw Threads: M Profile. Square and Hex Bolts and Screws (Inch Series). Socket Cap, Shoulder, and Set Screws, Hex and Spline Keys (Inch Series). Machine Screws and Machine Screw Nuts. Metric Machine Screws. Lock Washers (Inch Series). Plain Washers. Part Identifying Number (PIN) Code System Standard for B18 Fastener Products. Helical Coil Screw Thread Inserts - Free Running and Screw Locking (Inch Series). Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength .

12-1

Source : h t t p : / /www.ass i s t docs . com -- Down loaded : 2 0 1 3 - 0 2 - 2 5 T 0 4 : 3 6 Z C h e c k the source to ve r i f y that th is is the cur rent ve rs ion be fore use.