milled enclosures
TRANSCRIPT
Enclosures for Electronics,RF- and Microwave Technologies
History
1980 MTS Mikro-technik has been founded as a development andmanufacturing company
1995 Changing fromMTS Mikrotechnik inMTS Systemtechnik tofollow the changeddemands on the market
Main products
Signal distribution-systems for audio,video, RF and microwave, used fortelecommunication,radio monitoring, satellite communication
Development and pro-duction of active andpassive components forrf- technology
Manufacturing ofmech. components foraviation, for aerospaceindustry, RF-techn. aswell as for optical industry
Competence
Own design and production of RF-comp. and -systems
RF-development and -simulation laboratory
Big CNC-productioncenter
Soft- and hardwarelaboraty
CAD construction service
Modern production-methods like CAM
About us
Gewerbepark Ost 8D-86690 MertingenGermanyPhone +49(0) 9078 / 91294-0 Fax +49(0) 9078 / [email protected]
Systemtechnik
Certified with DIN ISO 9001:2000
RF-systems and -units
Data technology
Mechanical products
CopyrightTechnical subject to change.Illustrations similar.
Today notable companies of the electronic industry all over europebelong to our customers:
ALCATEL, Arpege Défense, AUDI, Bosch Telecom, CERN, Danet, DB Telematik, DESY, DLR,EADS, Ericsson, ESA, Eurocopter, Infineon, Leica, Lucent Technologie, ND SatCom, PTB,Rohde & Schwarz, Serco, SIEMENS, Thomson, T-Mobile, Vodafone
www.mts-systemtechnik.de2
AG/AGO Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
UC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ZG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
EH Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
G Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PGS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
KG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FK Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
EG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
GRS/GRA Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
EGD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
EB Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Front/Rear and Dummy Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
F and TF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Milling Center / Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Overview devices and systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Overview components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Table of contents
Milling Enclosures – RF-Enclosures4
AG/AGO series
The RF-enclosures of AG and AGO seriesare precision enclosures milled out of afull aluminum block. Their characteristic isa circuit board mounted with clampingscrews, so drillings are not necessary inthe circuit board. These enclosures arelocked with multiple bolted, 2 mm strongcovers, which are alternatively flush lok-ked or have a mounting flange exceeding10 mm on each side.
DimensionsThe enclosures of AG/AGO series are available in four different sizes, heightand width remain always the same andonly the length will change (please notethe drawing on page 6).
Content of deliveryThe enclosures are delivered according tothe defined order version, including allnecessary accessories. (enclosures withcover/bottom, screws for the cover-/bot-tom-and circuit board mounting as well asaccessories manufactured.)
ServiceWe do modificate enclosures, accordingto customer specifications, e.g. drill-holepattern and modified dimensions.
Application domainAmplifiers (modules), oscillators, attenuator, etc.
Type 3With standard drill hole-pattern, RF-con-nectors, optional with fastening as well asone ground connector and one feedthrough filter DF2
Type 2without mounting hole
Versions
Type 1With standard mounting hole-pattern (inopposite of the UC-series only for onefeed through filter DF2)
Milled enclosures – RF-enclosures 5
Dimensions of covers and bottom plates (in mm)
M2,5
M3 mounting holes for flange mount jacks
Circuit board clamp
bottom plate
circuit board
Structure and difference
AG seriesThe circuit board is only accessible fromone side after mounting.
M3 mounting holes for flange mount jacks
Circuit board clamp
bottom plate
circuit board
M2,5
M2,5Cover plate
AGO(pen) seriesThe circuit board is accessible from bothsides after mounting.
Dimensions of cover plates and bottom plates in mm
Enclosures bottom plate covertype L x B x H l b type L x B x H
AG 1 B1 62 51 2 52 40 C1* 41,8 51 2
AG 2 B2 94 51 2 84 40 C2* 74,0 51 2
AG 3 B3 125,5 51 2 115,5 40 C3* 105,5 51 2
AG 4 B4 157 51 2 147 40 C4* 137,0 51 2
AGO 1 B1 62 51 2 52 40 C1 41,8 51 2
AGO 2 B2 94 51 2 84 40 C2 74,0 51 2
AGO 3 B3 125,5 51 2 115,5 40 C3 105,5 51 2
AGO 4 B4 157 51 2 147 40 C4 137,0 51 2
Configuration of model designation
AGO 2 - 1 - CB - 5 4 - C N
surface protectionR = raw N = chemically nickel-plated 8 – 10µ
Surface pretreatmentT = vibratory finishing C = matt finish(see technical information)
RF-ports, female 0 = BNC 4 = SMA2 = TNC 8 = N
Impedance5 = 50 Ω (7 = 75 Ω on request)
Cover/bottom combination (designate only with one letter)C = cover (flush)bottom (with overstanding flange and mounting holes)
Design
Size
Type of enclosure
Milled enclosures -Dimensions6
Dimensions, AG/AGO series
All dimensions in mm
AG/AGO1
AG/AGO2
AG/AGO3
AG/AGO4
77Milled enclosures – RF-enclosures
UC-series
The RF-enclosures of UC series are preci-sion enclosures milled out of a full alumi-num block. The circuit board is screwedonto a circulating assembly web, so drillholes on the circuit board are not necessa-ry. The enclosures are locked with multi-ple bolted, 2 mm strong covers, which canbe choosed as flush locked or as a moun-ting flange exceeding 10 mm on eachside.
The enclosures of UC-series are availablein four different sizes, whereby heightand width remain always the same, onlythe length will change (please note thefollowing drawings).
Content of delivery According to the defined order versions, theenclosures are delivered with all necessary accessories (enclosures with cover/bottom, screwsfor the cover-/bottom-and circuit board mounting,as well as accessories according to the design.)
ServiceWe do modificate enclosures, according to customer specifications, e.g. drill-hole pattern andmodified dimensions.
Application noteFor example amplifiers (modules), oscillator, attenuators etc. Version 3
With standard drill hole-pattern, 2 RF-connectors,optional with fastening as well as a ground con-nector and one feed through filter DF2
Version 1With standard drill hole-pattern (in opposite ofthe AG/AGO-series for 2 feed through filters DF2).
Version 2 Without mounting holes
Versions
Configuration of model designation
UC2 - 1- CB - 5 4 - C N surface protectionR = rawA = yellow alodynedN = chemical nickel-
plated
surface pretreatmentT = vibratory finishingC = matt finish (see technical informa-tion)
RF- Ports0 = BNC2 = TNC4 = SMA8 = N
Impedance5 = 50 Ω(7 on request)
Cover/bottom combina-tion ( designate onlywith one letter)C = cover (flush)B = bottom (with over
standing flange and mounting holes)
Design
Type and size
88
Standard design
Model La Li Ba Bi H
UC1 41,8 31,8 48 38 33
UC2 73,5 63,5 48 38 33
UC4 137,0 127,0 48 38 33
UC6 200,7 190,7 48 38 33
Dimensions in mm
All dimensions in mm
Dimensions, UC series
99Milled enclosures – RF-enclosures
TC-series
The rf-/microwave enclosures are desi-gned to built-in TO-8 devices, to insuresufficient heat transfer and ground connection to each module. Theboards can be mounted in close contactto TO-type enclosures.
MaterialAluminum base alloy
DesignWith exceeding 3mm-bottom plate. Com-pleted with all drill holes for mountingbottom plate, flange mount jacks, forfeed through filters and ground connec-tors.
Content of delivery Enclosures with bottom plate, mountingmaterial , 2 RF-jacks, 1 ground connector,1 feed through filter, 1 blind plug UNEF12-32 and M1,4 screws (circuit boardmounting).
Configuration of model designation
TC2 - TA - 5 4
RF-ports female0 = BNC2 = TNC4 = SMA8 = N
5 = 50 Ω7 = 75 Ω
Standard surface TR, TA, CN
Size
Standard design
Model La Li Ba Bi H I
TC2 35 29 25,4 19,4 21 25
TC4 61 55 25,4 19,4 21 51
TC5 74 68 25,4 19,4 21 64
Dimensions in mm
1010 Milled enclosures
Dimensions, TC series
Dimensions in mm
Circuit board mountingTC2
TC4
TC5
1111Milled enclosures – RF-Hybrid enclosures
The ZG aluminum enclosures are designedto built-in RF/microwave hybrid-thinfilm-and stripline-circuits. The ZG-series represent an ideal enclosurefor RF hybrid circuits and LSI applications.All inside dimensions are in inch.
MaterialAluminum base alloy
Content of deliveryEnclosures with inlay cover and themounting screws M2.
Enclosures with inlay cover and the mountingscrews M2.
Configuration of model designation
ZG 1 - 2 - TRSurfaceTR = vibratory finishingTA = yellow alodynedCN = nickel-plated(see technical information)
2 = screwed inlay cover
Enclosure 1, 2, 3, 4
ZG series
ZG-series
Dimensions, ZG series
Basic design ZG1-2 ZG2-2 ZG3-2 ZG4-2
Dimensions
Outside (mm) 33,6 x 53,6 x 20* 33,6 x 79 x 20* 59 x 79 x 20* 59 x 129,8 x 20*
Circuit board 1" x 1" 1" x 2" 2" x 2" 2" x 4"
* Other dimensions on request!
Side view
ZG1-2
ZG2-2
ZG3-2 ZG4-2
All dimensions in mm
Dimension, ZG series
1212 Milled enclosures – solid lightweight enclosures
RG series
Low weight enclosures milled out of a fullaluminum block with rounded edges. Ide-al for batteries or portable power supply.The RG series is used in the medical indu-stry also.
Material Enclosures
Aluminum base alloy
Cover Aluminum base alloy
Option (on request) Material Surface (colored anodize) Treatment and colored anodizing as
desired Other dimensions are possible
Content of deliveryEnclosures include cover and screws
Standard design
Design dimensions (mm)La Li Ba Bi Ha Hi
RG1 39 35 39 35 19 15
RG2 49 45 49 45 19 15
RG3 59 55 59 55 19 15
RG4 79 75 79 75 19 15
RG5 99 95 99 95 19 15
RG6 49 45 39 35 19 15
RG7 59 55 39 35 19 15
RG8 79 75 39 35 19 15
RG9 99 95 39 35 19 15
RG10 59 55 49 45 19 15
RG11 79 75 49 45 19 15
RG12 99 95 49 45 19 15
RG13 99 95 79 75 19 15
Configuration of model designation
RG6 - TRSurfaceTR, TA, TN, TE + color (see technical information)
Model
Dimensions, RG series
Dimensions in mm
1313Experimental enclosures
The enclosures are manufactured out ofan aluminum tube and are closed at theends with flat screws mounted covers onboth sides.Especially, they are suitable for buildingup attenuators or similar passive elements.
Enclosures Aluminum base alloy
CoverAluminum base alloy2 mm thick, mounted with screwsM2x6
Content of deliveryEnclosures with two flat coversincluding mounting material and RF-connectors.
EH series
EH1
Exampel 1
Exampel 2
Exampel 3
Exampel 4
RF-different connecting interfaces, EHseries
Configuration of model designation
EH1 - 1 - TR - 1A Combination of connec-tors and their position
SurfaceTR = rawCN = nickel plated
Versions1 = without ground pin2 = with ground pin
Enclosures
Dimensions, EH series
EH3
All dimensions in mm
Enclosure Dimensions (mm)La Ba Ha
EH1 40 30 30
EH2 50 20 20
EH3 60 40 30
EH2
BNC female: 0 = 50 Ω, M = 75 ΩBNC male: 1 = 50 Ω, N = 75 ΩTNC female: 2 = 50 Ω, P = 75 ΩTNC male: 3 = 50 Ω, R = 75 ΩSMA female: 4 = 50 Ω1.6/5.6 female: 6 = 75 Ω1.6/5.6 male: 7 = 75 ΩN female: 8 = 50 Ω, S = 75 ΩN male: 9 = 50 Ω, T = 75 ΩSMB female: A = 50 ΩSMC female: C = 50 Ω
1414 Profile enclosures
G series
With the G series, you have the opportu-nity, to order enclosures of the SG, SB,PGS and TG series in various heights. Wewill deliver these enclosures short-termand in small number of pieces.
Combination of cover and bottomOur large selection gives you the possibili-ty to choose your own special enclosure.
30 x 40 mm
40 x 30 mm
40 x 40 mm
40 x 50 mm
40 x 60 mm
40 x 80 mm
40 x 100 mm
40 x 120 mm
40 x 150 mm
40 x 180 mm
50 x 40 mm
50 x 50 mm
50 x 60 mm
50 x 80 mm
50 x 100 mm
50 x 120 mm
50 x 150 mm
50 x 180 mm
50 x 200 mm
60 x 60 mm
60 x 80 mm
60 x 100 mm
60 x 120 mm
60 x 140 mm
80 x 80 mm
80 x 100 mm
80 x 140 mm
80 x 150 mm
80 x 160 mm
80 x 200 mm
80 x 220 mm
100 x 100 mm
100 x 150 mm
100 x 200 mm
Configuration of model designation
G 1 2 - 80 - 60 - 45 - TRStandard surfaceTR, TA, CN (see technical Infor-mation)
Height H
Length La
Width Ba
Bottom
Cover
Design
Dimensions in mm
Available tube profiles
Ba x La Ba x La
Type 0Enclosures withoutmounting drill holes,cover and bottom plate
Type 53 mm thick screwedprofile cover or bot-tom plate
Do you desire a large amount of mounting screws or do you need other positions? Please call us!
Type 12 mm thick screwedcover and bottom plate.
Type 2Inlay cover and bottomplate
Preferred type 3Inlay screwed cover andbottom plate
Preferred type 43 mm thick profilecover or bottom plate
Type 92mm thick flat cover orbottom plate.
Type 8Screwed exceeding3mm thick profile coveror bottom plate withmounting holes (Ø 3,2mm)
Preferred type 73mm thick exceedingprofile cover or bot-tom plate
Preferred type 6Screw mounted, flatexceeding bottom pla-te (2 mm thick) withmounting holes (Ø 3,2mm)
Dimensions, G series
Cover and bottom plate versions
1515151515Profile 15
P 40
Precision profilesMaterial: aluminum base alloy Tolerance after DIN 17615
Cover profiles P 40 – P 100Like the SG, SB, TG and G series
Side-piece profiles SP 1 – SP 4Like KG, KGT, EG and EGD series
P 50
P 60
P 80
SP 1
SP 2
SP 3
SP 4
Dimensions in mm
P 100
Dimensions of structure
Side-piece profiles SP 1 – SP4
Cover structure P 40 – P 100
Profiles 15
Profiles
1616161616161616 Profile enclosures
All enclosures of PGS series are equippedwith a flat bottom plate and an inlaycover, which get screwed in the enclosu-res. The PGS series are suitable to built-inrf-components, hybrid circuits and allkinds of small components. PGS enclosures are very sturdy and exten-sively RF shielded. Enclosures, covers andbottom plates are made out of aluminum.All of our enclosures of the PGS serieshave the same height of 22 mm.If other heights are needed, see the Gseries.
PGS series
Technical data and information for ordering
Design dimensions (mm)Ba La L l
PGS40-30-22-TR 40 30 50 40
PGS40-40-22-TR 40 40 60 50
PGS40-50-22-TR 40 50 70 60
PGS40-60-22-TR 40 60 80 70
PGS40-80-22-TR 40 80 100 90
PGS40-100-22-TR 40 100 120 110
PGS40-120-22-TR 40 120 140 130
PGS40-150-22-TR 40 150 170 160
PGS40-180-22-TR 40 180 200 190
PGS50-40-22-TR 50 40 60 50
PGS50-50-22-TR 50 50 70 60
PGS50-60-22-TR 50 60 80 70
PGS50-80-22-TR 50 80 100 90
PGS50-100-22-TR 50 100 120 110
PGS50-120-22-TR 50 120 140 130
PGS50-150-22-TR 50 150 170 160
PGS50-180-22-TR 50 180 200 190
PGS50-200-22-TR 50 200 220 210
PGS60-60-22-TR 60 60 80 70
PGS60-80-22-TR 60 80 100 90
PGS60-100-22-TR 60 100 120 110
PGS60-140-22-TR 60 140 160 150
PGS80-60-22-TR 80 60 80 70
PGS80-80-22-TR 80 80 100 90
PGS80-100-22-TR 80 100 120 110
PGS80-140-22-TR 80 140 160 150
PGS80-150-22-TR 80 150 170 160
PGS80-160-22-TR 80 160 180 170
PGS80-200-22-TR 80 200 220 210
PGS80-220-22-TR 80 220 240 230
PGS100-100-22-TR 100 100 120 110
PGS100-150-22-TR 100 150 170 160
PGS100-200-22-TR 100 200 220 210
Construction of model designation
PGS 80 - 60 - 22 - TR
= 2
2
Principle construction
Standard surface TR, TA, CN(see technical informa-tion)
Height H
Lenght La
Width Ba
Design
1717Profile enclosures 17171717171717171717
Series SG80-…
Series SG100-…
Dimensions in mm
Dimensions of enclosures with profilebottom plates and covers, SG series
The corpus of the enclosures are madeout of a square pipe. The enclosures areclosed with profile covers (see chapter“profiles”). These are designed once as flush lockedcovers and once as exceeding bottoms,like a mounting flange. Especially theyare suitable for mounting powers sup-plies, control devices, switches or similarcomponents. The profile webs in the bot-tom plate can be used as support.If other dimensions are desired, please seethe G-series.
Principle construction
SG series
Technical details and information of ordering
Design dimensions (mm)Ba La L H
SG80-60-45-TR 80 60 80 45
SG80-80-45-TR 80 80 100 45
SG80-80-65-TR 80 80 100 65
SG80-100-45-TR 80 100 120 45
SG80-100-65-TR 80 100 120 65
SG80-140-40-TR 80 140 160 40
SG80-140-45-TR 80 140 160 45
SG80-140-50-TR 80 140 160 50
SG80-140-73-TR 80 140 160 73
SG80-150-40-TR 80 150 170 40
SG80-150-45-TR 80 150 170 45
SG80-150-50-TR 80 150 170 50
SG80-150-73-TR 80 150 170 73
SG80-160-40-TR 80 160 180 40
SG80-160-45-TR 80 160 180 45
SG80-160-50-TR 80 160 180 50
SG80-160-73-TR 80 160 180 73
SG80-200-40-TR 80 200 220 40
SG80-200-56-TR 80 200 220 56
SG80-200-86-TR 80 200 220 86
SG80-220-40-TR 80 220 240 40
SG80-220-56-TR 80 220 240 56
SG80-220-86-TR 80 220 240 86
SG100-100-40-TR 100 100 120 40
SG100-100-45-TR 100 100 120 45
SG100-100-50-TR 100 100 120 50
SG100-100-73-TR 100 100 120 73
SG100-150-40-TR 100 150 170 40
SG100-150-45-TR 100 150 170 45
SG100-150-50-TR 100 150 170 50
SG100-150-73-TR 100 150 170 73
SG100-200-40-TR 100 200 220 40
SG100-200-45-TR 100 200 220 45
SG100-200-50-TR 100 200 220 50
SG100-200-73-TR 100 200 220 73
1818181818181818 Profile enclosures
These enclosures are specially customized(we produce unique pieces also). Custo-mers will decide about width and depth.You can choose the height between 1 HU,2 HU, 3 HU or 4 HU. (See side-pieces –chapter “profiles”). KG enclosures areused in data technology, in the electronic,in testing sets, in engine constructions,etc..
MaterialAluminum
Content of deliveryEnclosures with a 3mm thick front-andrear panel. Depth and width as required by the customer
OptionsWe also offer handles and pedestalsfor the enclosures.
Configuration of model designation
KG 2 - 220 - 150 - TRSurfaceTR, TA, CN, TE, TEF (see technicalinformation)
Width B (mm)
Depth T (mm)
Height H (HE)
Design
KG series
Dimensions, KG series
➀ Side-piece 1-4 HU
➁ Cover
➂ Bottom plate
Dimensions in mm
Profile overview, KG series
Design height unit (H )
SP-1 1 HE ( 40,0 mm)
SP-2 2 HE ( 82,0 mm)
SP-3 3 HE (126,5 mm)
SP-4 4 HE (171,0 mm)
➃ Front panel
➄ Rear panel
19191919Profile enclosures
Rear panel Cover
Side-piece
Front panel Bottomplate
Side-piece
Special design
We also design front panels on request,e.g. with drill holes, surface treatments,screen process, etc .
Application
The picture aside shows you an openenclosure equipped with circuit boards inEuropean standard card format.
Sectional drawing, KG series
Application
20202020 Cassette enclosures – RF-milled enclosures
FK series, 3 HU
For an optimum shielding of high fre-quency elements we have the perfectsolution: The FK series. These cassetteenclosures are milled out of an aluminumblock. Their size is designed in Europeanstandard card format for 19 ”plug-inmodule to DIN 41494 (part 5). The specia-lity of these cassettes is, that the dimen-sions inside show European Standard Cardformat also (100 x 160 mm) and the circuitboards are fixed in norm position. Casset-tes in the same design are deliverable as a6-HU-cassette (233,4 x 160 mm or 233,4 x220 mm) also .Both cassette types areoffered in 6 different widths (5 TE, 6 TE, 7TE, 8 TE, 10 TE and 12 TE). Partial measu-res are called TE (1 TE = 5,08 mm).
Front panelsAluminum, 2,5 mm thick standard: colorless anodized, back side chromizedwith plastic nipples current conducting:colorless anodized, back chromized withmetall nipples
Height (H) 3 HU= 128,40 mm6 HU= 261,80 mm
Width (Ba) 5 TE= 25,00 mm6 TE= 30,10 mm7 TE= 35,20 mm8 TE= 40,30 mm
10 TE= 50,40 mm12 TE= 60,60 mm
Content of deliveryMilled frame with two inlay covers com-pleted with screws to fix the covers. If thefront panel is ordered, we add the moun-ting material.
Special designThe basic structure can include sectionsand separators as well as mounting provi-sions for various plugs made on request.
Configuration of model designation
FK3 1 - 5 - 1 - 2 - TRStandard surface TR, TA, CN (see technical information)
Millings for connectors0 = without millings1 = for 96-pole connectors to DIN 416122 = for 9-pole SUB-D connectors3 = for 15-pole SUB-D connectors4 = for 25-pole SUB-D connectors
Front panel1 = without front panel2 = with standard front panel without handles3 = with standard front panel with handles4 = with current conducting front panel without handles5 = with current conducting front panel with handles
Width Ba (5 = 5 TE, 6 = 6 TE, 7 = 7 TE, 8 = 8 TE, 10 = 10 TE, 12 = 12 TE)
Depth (1 = 160 mm, 2 = 220 mm)
Basic version (FK 3 = 3 HU)
2121Cassette enclosures – RF-milled cassettes 212121212121212121212121
FK series, 6 HU
Configuration of model designation
FK6 1 - 5 - 1 - 0 0 - TAStandard surface TR, TA, CN (see technical information)
Millings for connectors above
Millings for connectors below 0 = without millings1 = for 96-pole connectors to DIN 416122 = for 9-pole SUB-D connectors3 = for 15-pole SUB-D connectors4 = for 25-pole SUB-D connectors
Front panel1 = without front panel2 = with standard front panel without handles3 = with standard front panel with handles4 = with current conducting front panel without handles5 = with current conducting front panel with handles
Width Ba 5 = 5 TE6 = 6 TE7 = 7 TE8 = 8 TE
10 = 10 TE12 = 12 TE
Depth1 = 160 mm2 = 220 mm
Basic design (FK 6 = 6 HU)
Construction and dimensions, FK series
Front panel enclosuresBa H h
5 TE 25,00 24,5 10,4
6 TE 30,10 29,5 15,4
7 TE 35,20 34,6 20,5
8 TE 40,30 39,6 25,5
10 TE 50,40 49,8 35,7
12 TE 60,60 59,8 45,7
Dimensions in mm
22222222222222 Cassette enclosures 22222222
deep
Dimensions in mm
Dimensions, FK series, 3 HU
Sectional drawing oflength of the enclo-sures with millingsfor connectors to DIN41612 and mountedEurope card
Millings for connectors, FK series, 3 HU
FK cassette with millings for 64/96-pole connectors to DIN 41612 FK31 cassette with millings for SUB-D connectors
25-pole 15-pole 9-pole
Please, see the chapter of drilling hole-pattern fordimensions for millings
Fitting examples, FK series, 3 HU
Adapter plateto DIN 41612
Adapter plateto DIN 41612
RF-ports
FK31 cassette with an angled SUB-D connector, 25-pole, including adapterplate for standard 19” module rack to DIN 41494.
FK31 cassette in a module rack to DIN 41494. The combined design iswith filtered SUB-D connectors and rf-connectors.
Possibility to place SMS-RF-connectors.
Dimensions in mm
2323Cassette enclosures 2323
deep
Dimensions, FK series, 6 HU
Sectional drawing about length of the enclosures and millingsfor connectors to DIN 41612 and mounted Europe card.
Millings of connectorsFK cassette with 6 HU, the backwith millings for 64/96-pole con-nectors to DIN 61412.
position top position top
position bottomposition bottom
FK cassette with 6 HU, theback with millings for SUB-Dconnectors 25-pole.
Accessories for cassettes ofthe FK series
Adapter plate with SUB-D-connector tobuild-in a module rack to DIN 41494.
AP 25 for 25-pole SUB-D connector AP 15 for 15-pole SUB-D connector AP 9 for 9-pole SUB-D connector
Dimensions in mm
Configuration of model designation
AP 9 - TRStandard surface TR, TW (see technical information)
Adapter plate for 9-pole SUB-D connector
Filtered miniature D-Sub connector We also deliver filtered miniature
D-Sub connectors
AP 25 AP 15 AP 9
Dimensions in mm
Dimensions, adapter plate
242424 19”-plug in module2424242424242424
EG series
The 19” plug-in modules are available in 6different heights. An extremely stableand robust construction is reached afterusing thick extrusion type side-pieces(4mm). Profile slots in the side pieces givethe user the possibility to mount variouscomponents sideways, also. The side pie-ces can be exchanged fast and simple.Drill holes and other mechanical modifica-tions, just like front panel lettering arepossible on request.The enclosures are delivered with hand-les, alternatively with chroming round barsteel or with cast aluminum. Differentsizes and versions of these 19” plug-inmodule are available in short-term. If notspecified, the bottom plate, the front andback panel are coated with a protectionfoil and the side-pieces are aluminum raw(vibro-finished).
SurfaceFollowing options are available:Nickel-plated, alodyned or anodized (seetechnical information)
Content of deliveryEach 19” plug-in module is packed anddelivered as a complete set including allnecessary screws. Ordered without hand-les, the front panels won´t have drill holesto mount handles.
Depth of cover up to 150 mmMaterial: aluminum, width: 399 mm (mounting area), thickness: 3 mm Cover : 150mm depth Material: aluminum cover perforates (variable versions, see our order key)Width: 399 mm (mounting area), thickness: 0,8 mm
Rear panel, RP seriesMaterial: aluminum base alloy, width: 433 mm, thickness: 3 mm
Side-pieceMaterial: aluminumbase alloy (extrudedsection), height: see diagram
Bottom plateMaterial: aluminum base alloy Thickness: 3 mm (standard), on request 4 mm available
Front panel, FP seriesMaterial: aluminum base alloyWidth: 19” (482,6 mm), height: 1to 6 HUThickness: 4 mm (3 mm optional)
SurfaceStandard version: No surface treatment. On request wewill deliver yellow alodyned or color-less anodized also .
Information about 19” front and rear panels as well as handles, please see chapter “accessories”. Dimensions of side-pieces of the SP series see chapter “profiles”.
Technical information, EG series
252525252525252519”-plug-in module 2525252525252525
Dimensions, EG series
Dimensions in mm
Configuration of model designation
EG 1 - 150 - 1 - 4 - GRS-1 - X
Perforated covers are only available in the sizes 150 / 250 / 350 / 450
Surface treatmenton request (see technical infor-mation)
Handle design(on request)
Round bar steelGRS-12 = 1 HU GRS-22 = 2 HU GRS-32 = 3 HU GRS-42 = 4 HU GRS-52 = 5 HU
Cast aluminumGRA-22 = 2 HUGRA-32 = 3 HUGRA-42 = 4 HUGRA-52 = 5 HU/6 HU
Front panel 3 = 3 mm thick 4 = (4 mm thick,
standard)
Cover1 = perforated
aluminum cover, blue varnished, standard depth at 150 mm
2 = perforated aluminum cover, surface: raw
3 = perforated aluminum cover, surface: colorless anodized
4 = perforated aluminum cover, surface: yellow alodyned
5 = perforated steel cover,surface: gray varnished
6 = aluminum cover, 3 mm thick (raw, not perforated), standard depth up to 150 mm
Depth (150 mm)
Basic design
Sectional drawing, EG series
Standard design
Depth T 1-HE-Model 2-HE-Model 3-HE-Model 4-HE-Model 5-HE-Model 6-HE-Model(mm) h = 40 mm h = 82 mm h = 126,5 mm h = 171 mm h = 208,5 mm h = 253 mm
100 EG1-100-6-4 EG2-100-6-4 EG3-100-6-4 EG-4-100-6-4 EG5-100-6-4 EG6-100-6-4
150 EG1-150-1-4 EG2-150-1-4 EG3-150-1-4 EG-4-150-1-4 EG5-150-1-4 EG6-150-1-4
250 EG1-250-1-4 EG2-250-1-4 EG3-250-1-4 EG-4-250-1-4 EG5-250-1-4 EG6-250-1-4
350 EG1-350-1-4 EG2-350-1-4 EG3-350-1-4 EG-4-350-1-4 EG5-350-1-4 EG6-350-1-4
450 EG1-450-1-4 EG2-450-1-4 EG3-450-1-4 EG-4-450-1-4 EG5-450-1-4 EG6-450-1-4
550 EG1-550-1-4 EG2-550-1-4 EG3-550-1-4 EG-4-550-1-4 EG5-550-1-4 EG6-550-1-4
650 EG1-650-1-4 EG2-650-1-4 EG3-650-1-4 EG-4-650-1-4 EG5-650-1-4 EG6-650-1-4
5 HU versions are based on a combination of side-pieces of the type SP2 (2 HU) and the type SP3 (3 HU).6 HU versions are based on a combination of side-pieces of the type SP3 (3 HU).
Handles26262626262626262626262626262626
GRS and GRA series
GRS series
The handles of this serie are made out ofground, polished, high gloss chromedround barsteel with 8 and 10 diameters.Female thread with M4 respectively M5.They´ll be delivered by pairs with twowashers and the matching screws.
Design Height HU Dimensions in mm threadsL D H
GRS-12 1 32 8 29 M4
GRS-22 2 55 10 36 M5
GRS-32 3 88 10 36 M5
GRS-42 4 120 10 36 M5
GRS-52 5/6 180 10 36 M5
GRA series
All surfaces are sandblasted and anodi-zed. The female thread is M5. They´ll bedelivered by pairs and with the matchingscrews.
Design Height HU Dimensions in mmL b
GRA-12 1 25 41
GRA-22 2 55 69
GRA-32 3 88 102
GRA-42 4 120 134
GRA-52 5/6 180 194
27272719”-plug in module – RF-shielded
EGD series
Beside plug-in modules of the EG series,we produce 19” plug-in modules with RFshield (EGD series) also. In spite of theproved slot and spring principle, it is onlypossible to remove the cover and the bot-tom from the front and rear panelwithout dismantling, if the parts get over-worked. Special drillings and millings onrequest. Other dimensions on request.
SurfaceStandard: Aluminum vibratory finishing.Following surfaces are optionally available: Alodyned (low priced surfaceprotection), chemical nickel-plated (corro-sion resisting), optimal shield of magneticsource of interference (see technical information).
Content of deliveryEach 19” plug-in module is packed anddelivered as a complete set including allnecessary mounting screws. Front panelswon´t have drill holes, if ordered withouthandles.
Special versionsWe also deliver 19” plug-in module onrequest.
Technical information, EGD series
282828 19” plug-in module
Dimensions of 19”-front and rear panels
Design Height of units front panel in mm rear panel in mm
EGD2 2 HE 482,6 x 88,1 x 4 443 x 82,0 x 4
EGD3 3 HE 482,6 x 132,5 x 4 443 x 126,0 x 4
EGD4 4 HE 482,6 x 177,0 x 4 443 x 171,0 x 4
EGD5 5 HE 482,6 x 221,4 x 4 443 x 208,5 x 4
EGD6 6 HE 482,6 x 265,9 x 4 443 x 253,0 x 4
Further information see chapter “accessories”, FP series.
Standard designs
Depth T 2 HE 3 HE 4 HE 5HE 6 HE(mm) h = 82 mm h = 126,5 mm h = 171 mm h = 208,5 mm h = 253 mm
250 EGD2-250 EGD3-250 EGD4-250 EGD5-250 EGD6-250
350 EGD2-350 EGD3-350 EGD4-350 EGD5-350 EGD6-350
450 EGD2-450 EGD3-450 EGD4-450 EGD5-450 EGD6-450
Configuration of model designation
EGD 2-250 - GRS 22 - XStandard surfacetreatment on request (see technical infor-mation)
Versions of handlesRound bar steel GRS-12 = 1 HUGRS-22 = 2 HUGRS-32 = 3 HUGRS-42 = 4 HUGRS-52 = 5 HU/6 HU
Cast aluminumGRA-22 = 2 HUGRA-32 = 3 HUGRA-42 = 4 HUGRA-52 = 5 HU/6 HU
Standard design
Front view
Rear view
Dimensions of enclosures, EGD series
Drill holes for handles, only if ordered.
Dimensions in mm
292929Cassette enclosures – RF-cassettes
Back with a mounted connector.
The HK cassettes can be placed individual in amodule rack with 7 TE raster back plane.
The cassettes can be changed fast and without anyproblems.
Applications
HK series
The 3-HU aluminum cassettes fit in every4,4” module rack to DIN 41494 or, underassistance of guide bars (KF2 series), intoany 19”-Europe card plug-in modules toDIN 41494. The HK serie is available intwo different depths to take up Europecards with 100 x 160 mm or 100 x 220mm.Both cassette types are available in 4 dif-ferent widths (7 TE, 14 TE, 21 TE and 28TE). The distance of the guide slots for thecircuit boards is 1 TE (5,08 mm).We also supply the cassettes with lengthpartition walls on request.
Standard surfaceCassette and rear panel vibratory finishing, colorless alodyned. Front panelcolorless anodized, the back chromized.
Content of deliveryCassette with mounted front and rearpanel including M2,5 neck screws.
The HK serie is available in 4 different widths and 2 different length.
Standard design
Design Height of front panel width of front panel Length of profile(3 HU) B T
HK07-1 128,4 mm 7 TE = 35,2 mm 160 mm
HK04-2 128,4 mm 7 TE = 35,2 mm 220 mm
HK14-1 128,4 mm 14 TE = 70,8 mm 160 mm
HK14-2 128,4 mm 14 TE = 70,8 mm 220 mm
HK21-1 128,4 mm 21 TE = 106,3 mm 160 mm
HK21-2 128,4 mm 21 TE = 106,3 mm 220 mm
HK28-1 128,4 mm 28 TE = 141,9 mm 160 mm
HK28-2 128,4 mm 28 TE = 141,9 mm 220 mm
RF-cassettes with different widths in a 19” module rack.
303030 Cassette enclosures
Dimensions in mm
7 TE 28 TE
14 TE 21 TE
Configuration of model designation
HK07 - 1 - 2 - 1 1 = Rear panel without millings 2 = Rear panel with millings
for connectors to DIN 41612
2 = with front panel, without handles
3 = with front panel, with handles
1 = for Europe cards 100 x 16 mm
2 = for Europe cards 100 x 220 mm
Design
Dimensions, HK series
31313119” module rack
EB series
19” module racks, which are holding hig-hest mechanical stability. A speciality arethe full length extruded side-pieces profi-les. These general-purposed module racksare suitable to built-in assemblies basedon the standard card format to DIN 41494part 1 -5. Assemblies and Europe cardscan be built-in in the front and/or in theback. Generally, the module rack includes twohandles.
MaterialAluminum
Surface White alodyned.Offers best design as well as additionalsurface protection.
Content of deliveryAs an unmounted kit including side-pieceswith height rows and termination extru-sions, horizontal extrusions, female multi-point connectors, threaded rails M2,5,handles and mounting accessories.
Part front panel and rear panel are notincluded but can be separately ordered.(see technical information)
Standard design
Design width depth height B (mm) b (mm) T (mm) t (mm) H (mm) hs (mm) e (mm)
EB3-245 447,4 426,72 244,6 232,6 3HU = 132,5 112,5 57,1
EB3-305 447,4 426,72 304,6 292,6 3HU = 132,5 112,5 57,1
EB3-425 447,4 426,72 424,6 412,6 3HU = 132,5 112,5 57,1
EB3-545 447,4 426,72 544,6 532,6 3HU = 132,5 112,5 57,1
EB6-245 447,4 426,72 244,6 232,6 6HU = 265,9 245,9 190,5
EB6-305 447,4 426,72 304,6 292,6 6HU = 265,9 245,9 190,5
EB6-425 447,4 426,72 424,6 412,6 6HU = 265,9 245,9 190,5
EB6-545 447,4 426,72 544,6 532,6 6HU = 265,9 245,9 190,5
Front view Design EB3
Front viewDesign EB6,Partitionedheights
Top view
Configuration of model designation
EB3-245 - 1 - 1 - X
Special surface treatment onrequest
Equipment back0 = without equipment1 = 3 HU for a card format 100 x 160 mm
2 = 3 HU for a card format 100 x 220 mm
3 = 6 HU for a card format 233,4 x 160 mm
4 = 6 HU for a card format 233,4 x 220 mm
5 = 6 HU for two cards with 100 x 160 mm
6 = 6 HU for two cards with 100 x 220 mm
Equipment front0 = without equipment1 = 3 HU for a card format 100 x 160 mm
2 = 3 HU for a card format 100 x 220 mm
3 = 6 HU for a card format 233,4 x 160 mm
4 = 6 HU for a card format 233,4 x 220 mm
5 = 6 HU or two cards with 100 x 160 mm
6 = 6 HU for two cards with 100 x 220 mm
Standard design(see design general view)
Examples for the equipment, EB series
EB3-305-1-0
EB3-425-1-1
EB6-305-0-4
EB6-425-3-5Dimensions in mm
323232323232323232323232 19”-front/back/dummy panels
FP, RP, BP series
Standard 19”-front, rear and dummy panels are available in 6 different sizesand can be delivered ex stock.
Versions and materialFront panels:Material is 4 mm thick, aluminum basealloy, available with and without drillholes for handles (covered with protection foil).
Rear panels: Material is 3 mm thick, aluminum basealloyDummy plate:Material 4 mm thick, one side is coveredwith a protection foil.
SurfacesWithout any particulars about the surfacewe´ll deliver the front, rear and dummypanels blank, without chemical surfacetreatment. The following surfaces areoptionally available :Yellow alodyned (ideal priming for further treatment )Colorless anodizedColored anodized (for example black)Varnished to RAL
Drill holesFront panels:FP series with mounted drill holes for theside-pieces and elongated holes. FPx-GR series with additional drill holesfor handles.Rear panels: RP series with mounted drill holes for theside-pieces.Dummy panels:BP series with elongated holes only.
Special versionsWe do mechanical treatments on frontand rear panels (drillings, millings, etc.).Front and rear panels are lettered byscreen print or gravure, e.g. with yourcompany-logo.
19” front panels, standard design
Design height HE dim. in mm A B C D E F
FP1 1 19" x A x 4 43,6 31,7 – – 28,0 –
FP2 2 19" x A x 4 88,1 76,2 – – 70,0 –
FP3 3 19" x A x 4 132,5 57,1 – – 114,5 –
FP4 4 19" x A x 4 177,0 101,6 – – 159,0 –
FP5 5 19" x A x 4 221,4 146,0 – – 114,5 70,0
FP6 6 19" x A x 4 256,9 76,2 190,4 – 114,5 114,5
FP1-GR 1 19" x A x 4 43,6 31,7 – 32,0 28,0 –
FP2-GR 2 19" x A x 4 88,1 76,2 – 55,0 70,0 –
FP3-GR 3 19" x A x 4 132,5 57,1 – 88,0 114,5 –
FP4-GR 4 19" x A x 4 177,0 101,6 – 120,5 159,0 –
FP5-GR 5 19" x A x 4 221,4 146,0 – 180 114,5 70,0
FP6-GR 6 19" x A x 4 256,9 76,2 190,4 180 114,5 114,5
front panel with 3 mm thickness on request
rear panels standard design
Design height HE dim. in mm h E F
RP1 1 443 x h x 3 40,0 28,0 –
RP2 2 443 x h x 3 82,0 70,0 –
RP3 3 443 x h x 3 126,5 114,5 –
RP4 4 443 x h x 3 171,0 159,0 –
RP5 5 443 x h x 3 208,5 114,5 70,0
RP6 6 443 x h x 3 253,0 114,5 114,5
19” dummy panels, standard design
Design height HE Dim. in mm A B C D E F
BP1 1 19“ x A x 4 43,6 31,7 – – – –
BP2 2 19“ x A x 4 88,1 76,2 – – – –
BP3 3 19“ x A x 4 132,5 57,1 – – – –
BP4 4 19“ x A x 4 177,0 101,6 – – – –
BP5 5 19“ x A x 4 221,4 146,0 – – – –
BP6 6 19“ x A x 4 265,9 76,2 190,4 – – –
Dimensions, front and rear panels
1 – 4 HE 5 – 6 HE
Dimensions in mm
* Only for FP series** Only for handles
1 – 4 HE 5 – 6 HE
Front and dummy panels, FP and BP series
Rear panels, RP series
3333333333333333Part front panels 3 HU and 6 HU 33333333
Standard design
Dimensions in mm Design without handles Design with handlesA B C 3 HU 6 HU 3 HU 6 HU 3 HU 6 HU 3 HU 6 HU
H = 128,5 mm H = 261,8 mm
3 TE 14,84 – – F32-3 F62-3 TF32-3 TF62-3 F33-3 F63-3 TF33-3 TF63-3
4 TE 19,92 – – F32-4 F62-4 TF32-4 TF62-4 F33-4 F63-4 TF33-4 TF63-4
5 TE 25,00 – – F32-5 F62-5 TF32-5 TF62-5 F33-5 F63-5 TF33-5 TF63-5
6 TE 30,08 – – F32-6 F62-6 TF32-6 TF62-6 F33-6 F63-6 TF33-6 TF63-6
7 TE 35,16 – – F32-7 F62-7 TF32-7 TF62-7 F33-7 F63-7 TF33-7 TF63-7
8 TE 40,24 25,4 – F32-8 F62-8 TF32-8 TF62-8 F33-8 F63-8 TF33-8 TF63-8
10 TE 50,40 35,56 – F32-10 F62-10 TF32-10 TF62-10 F33-10 F63-10 TF33-10 TF63-10
12 TE 60,56 45,72 – F32-12 F62-12 TF32-12 TF62-12 F33-12 F63-12 TF33-12 TF63-12
14 TE 70,72 55,88 – F32-14 F62-14 TF32-14 TF62-14 F33-14 F63-14 TF33-14 TF63-14
16 TE 80,88 66,04 – F32-16 F62-16 TF32-16 TF62-16 – – – –
20 TE 101,20 86,36 – – – TF32-20 TF62-20 – – – –
21 TE 106,28 91,44 – F32-21 F62-21 TF32-21 TF62-21 F33-21 F63-21 TF33-21 TF63-21
24 TE 121,52 106,86 – – – TF32-24 TF62-24 – – – –
27 TE 136,76 121,92 – – – TF32-27 TF62-27 F33-27 F63-27 TF33-27 TF63-27
28 TE 141,84 127,00 – F32-28 F62-28 TF32-28 TF62-28 F33-28 F63-28 TF33-28 TF63-28
30 TE 152,00 137,16 – F32-30 F62-30 TF32-30 TF62-30 – – – –
32 TE 162,16 147,32 – F32-32 F62-32 TF32-32 TF62-32 – – – –
36 TE 182,48 167,64 – F32-36 F62-36 TF32-36 TF62-36 – – – –
40 TE 202,80 187,96 – F32-40 F62-40 TF32-40 TF62-40 – – – –
41 TE 207,88 193,04 – F32-41 F62-41 TF32-41 TF62-41 – – – –
42 TE 212,96 198,12 – F32-42 F62-42 TF32-42 TF62-42 – – – –
44 TE 223,12 208,28 – F32-44 F62-44 TF32-44 TF62-44 – – – –
60 TE 304,40 289,56 147,32 F32-60 F62-60 TF32-60 TF62-60 – – – –
63 TE 319,64 304,80 147,32 F32-63 F62-63 TF32-63 TF62-63 – – – –
81 TE 411,08 396,24 198,12 F32-81 F62-81 TF32-81 TF62-81 – – – –
84 TE 426,32 411,48 203,20 F32-84 F62-84 TF32-84 TF62-84 – – – –
F and TF series
Compatible for all module racks to DIN 41494
MaterialAluminum base alloy, 2,5 mm thickFront panel is colorless anodized Rear panel is chromized
F seriesWith plastic nipples
TF seriesWith metal nipples
Content of deliveryfront panel with holes 5,9 x 3,3 mm; F series with black plastic nipples(unmounted), TF series with metal nipples; including M2,5 x 11 neckscrews
Configuration of model designation
F 3 2 - 10Width A (TE)
2 = without handles3 = with handles
Height 3 HU (128,5 mm) or 6 HU (261,8 mm)
F = plasticTF = metal
Dimensions, F and TF series
343434343434343434343434 19” plug-in module enclosures
Cover and bottom plates, DB series
These cover and bottom plates are used inmodule racks of the EB series.
Version 1Aluminum covers or bottomsWith ventilation slots, plastic coated, 1,5mm thick.
Version 2Perforated cover sheetThickness: 1 mm Holes: 2 mm diameterSurface: white alodyned (Alodyne 1500)
Version 3Aluminum cover/bottom by full materialThickness: 2 mmSurface: white alodyned
Content of delivery1 cover or bottom 4 lens head screws M3 x 6
Standard designs
Design Application Depth T (mm) t (mm)
DB-245-X EB3-245 / EB6-245 207 179
DB-305-X EB3-305 / EB6-305 267 239
DB-425-X EB3-425 / EB6-425 387 359
DB-545-X EB3-545 / EB6-545 507 479
Abmessungen in mm
Version 1
Version 2 Version 3
Cards and cassettes guide bars
Design Depth Application
KF1-160 160 mm for the incorperation of plug-in moduls to DIN 41494
KF1-220 220 mm for the incorperation of plug-in moduls to DIN 41494
KF2-160, 4.4 inch 160 mm for the incorperation of plug-in moduls in 4,4" heights
KF2-220, 4.4 inch 220 mm for the incorperation of plug-in moduls in 4,4" heights
Examples for 19-plug-in modules with mountedcard or cassettes guide bars.
Dimension, DB series
Configuration of model designation
DB245 - xVersion 1, 2 or 3
Design
353535353535Accessories
DC-feed throughs, ground connection ...
DC-feed throughs
We offer various models of teflon isolatedDC-feed throughs. Type D1 and KF1 aredelivered without nut and tooth lock washer.
DC-feed throughs filters
Feed throughs filters prevent over powersupply, that the rf-signals enter respecti-vely treat out of enclosures.
Technical data about DC-feed through filters
Type max. voltage max. current (+85°C)
DF2 350 V DC 10 A
DF3 200 V DC 10 A
Delivered with nut and washer.Technical data sheets are available on request.
Ground connections, GP series
2 different types are available. Brass tinned ground connections, solderable passivated
Blind plug, BST Series
Made out of aluminum, 3 types are available
Soldering lug (100 units)
Brass, silver platedAccessories EH-series
Frequency in Hz
Inse
rtion
loss
in d
B
Typical attenuation DC-feed through filters
Accessories -screw taps363636363636
To make the additional built-in of connec-tors, etc. in enclosures easier, we offer youa number of screw taps.
screw taps
Thread -Ø x pitch bore hole-Ø Applicationin mm in mm in mm
Metric threads ISO (DIN 13)
M1.4 – 1,1 Screws
M1.6 – 1,25 Screws
M2 – 1,6 Screws
M2.5 – 2,05 Screws
M3 – 2,5 Ground connection GP
M3.5 – 2,9 DC-feed through D1
M4 – 3,3 Screws
M5 – 4,2 Screws
Metric fine threads ISO (DIN 13)
M5 x 0,5 4,5 DC-feed through D2
M6 x 0,5 5,5 Screws
M6 x 0,75 5,2 ScrewsM9 x 0,5 8,5 1.6/5.6 single hole connectors
M13 x 1 12,0 N-single hole connectors
UNC threads
UNC 2 –56 1,8 Screws
UNC 3 –48 2,1 Screws
UNC 4 –40 2,3 Screws (mounted SUB-D)
UNC 8 –32 3,5 DC-feed through filter DF3
UNF threads
UNF 10 –32 4,1 RF-connectors, SMS, SMB,SMC
UNEF threads
UNEF 12 –32 4,8 DC-feed through filters DF2
UNEF 3/8 –32 8,4 BNC-single hole connector
UNS threads
UNS 1/4 –36 5,7 SMA-single hole connector
Accessories – Screws and clamp 37
Design and description size application unit/ package
LKS-M3 x 06-100 M3 x 6 100cross-recess oval head screw, coaxial flange connectorpassivated high-grade steel to DIN 7985-A2
LKS-M2,5 x 06-100 M2,5 x 6 100cross-recess oval head screw, enclosures DIN 7985-A2
SES-M2 x 06-100 M2 x 6 100cross-recess countersunk screw, enclosures passivated high-grade steel to DIN 965-A2
SES-M5 x 12-100 M5 x 12 100cross-recess countersunk screw, EG-plug in modulepassivated high-grade steel to DIN 965-A2
SES-M3 x 06-100 M3 x 6 100cross-recess countersunk screw, enclosurespassivated high steel to DIN 965-A2
SES-M2,5 x 06-100 M2,5 x 6 100cross-recess countersunk screw, cover mounting, AG-seriespassivated high steel to DIN 965-A2
SESK-M2 x 06-3-100 M2 x 6 100countersunk screw with a small head cover mounting ZG/PGS/AGS (Ø 3,0 mm) and with cross slot, steel, nickel plated
LKS-M1,4 x 04-100 M1,4 x 4 100cross-recess oval head screw, self-tapped mounting UC/AGS/TC(without chip), steel, nickel plated, to DIN 7500-C
ULS-2,5-100 Ø 2,7 100Washers for screws M2,5 to DIN 125 A coaxial flange connector
ULS-3-100 Ø 3,2 100Washers for screws M3 to DIN 125 A coaxial flange connector
FES-2,5-100 Ø 2,7 100spring washers, high-grade steel to DIN 137 A coaxial flange connector
FES3-100 Ø 3,2 100Spring washers, high-grade steel to DIN 137 A coaxial flange connector
NIP-1-100 100Nipples, plastic, black front panel, F series
HS-M2,5-11-100 M2,5 x 11 100Neck screws, suitable for nipples 1 and 2 front panel, F/TF series
NIP-2 1Metal nipples front panel, TF series
Screws and clamp
Technical information – mechanical treatment38
Mechanical treatment
Front panels, back panels, enclosures andcassettes are offered with mechanical treatments also, that is drillings ,threads,millings, fuses, switches, LED´s, DC-feedthrough filter, etc.Various drill-hole patterns and standardmillings, which are needed to fit in com-ponents are saved in our CNC -machinesand can be retrieved fast.The drill-hole picture list makes it possiblefor our customers to specify standarddrill-hole pictures and standard millings.To manufacture, it´s enough to mark thedrill holes and the positions on a sketch. We´ll send you the CAD drawings of ourenclosures in which you can mark yourdrillings and millings, on request.Surface treatments, lettering with screenprinting or gravures are possible.
Surfaces
Our enclosures are available in varioussurface treatments.
Surface structure (preliminary treatment)T = vibratory finishingP = polished (on request)G = blastedC = matt
Surface refinementR = raw (without chemical refinement)A = yellow chromized (Alodyne 1200) W = colorless chromized (Alodyne 1500)N = chemical nickel plated (soldering)E = colorless anodizedEF = colored anodized
(if ordered, specify color)G = gildedS = silvered
Example
ZG 1 - 2 - T RSurface refinement
Surface structure
Please, specify surface treatment with 2-digits at the end of the order key, if youorder customized enclosures.
Description of surfacesT = vibratory finishingStandard surface structure of all series inthe catalogue.
P = polished (manual)Decorative surface
G = blasted Matt version, decorative. Recommended,if nickel-plated afterwards (problematicalat tapped blind hole).
C = chemical pickled, matt version (pro-blematical at fits) chemical nickel plated.The parts are powerless nickel-plated. Thesurface can be soldered. Layer 8 – 10 µ.
Anodized Aluminum parts are anodized.
Layer 15 – 18 µ. Decorative surface butnon-conductive. If requested, please spe-cify colour, e.g. colorless, black or anodi-zed similar RAL color scale.
Alodyned (chromized)A = yellow alodyned W = white alodyned
Low priced surface protaction (corrosionprotaction). Good priming for varnishingas well.
Technical information – drill hole-pattern 39
Drill hole-pattern
M… metric threadsU… inch threads (UNC, UNF, UNEF)
Examples
B 4.2/t 12 Drilling Ø4,2 mm,12 mm deep
B 5 Drilling Ø 5mm
AF 5 Counter bore DIN 74-Af 5
U 8-32 Threads UNC8-32
M6/t 10 Thread M6,10 mm deep
SD 9 N
SD 9 U
SD 15 N
SD 15 U
SD 25 N
SD 25 U
SD 37 N
SD 37 U
SD 50 N
SD 50 U
Sub D 9-pole
Sub D 15-pole
Sub D 25-pole
Sub D 37-pole
Sub D 50-pole
B… drilling
B…/t… drilling (tapped blind hole)/depth
M…/t… metric threads (tapped blind hole) U…/t… inch threads (tapped blind hole)
Af… counter bore to DIN 74 Af...(90°)
Dimensions in mm
Technical information 40
F 2-12,2 SMA 2-hole-flange
F 4-12,7 3/4"-Flange
F 4-18,2
RD 1
RD 2
round-miniature-connector
RIB 24 micro ribbon 24-pole
RIB 50 micro ribbon 50-pole
RIB 36 micro ribbon 36-pole
Drill hole-pattern
standard 1”-flange
Dimensions in mm
We produce precision milled components for electronic industry,for aerospace industry and for optical industry with very highrequirements. We process alloys of light metal, non-ferrousmetals and synthetic materials. Of course we convert externaland internal data of construction to different machine controlsvery fast via CAM technology (computer aided manufacturing,NC-programming).
very modern centers for producing with5-axis-CNC-technology
Complicated multi side processing Certified to DIN ISO 9001:2000 3D-measurement with written protocol 3D-measurement accuracy ± 0,004 mm 3D-measurement axes 400 x 500 x 400 mm
We offer you products with all technical producible surfaceslike chemical nickel, anodized etc.. We manufacture from pro-totypes up to production series according to your templates /graph. On request we equip and mount your product comple-tely. We provide an opportunity for 3D-measurements.
CNC-milling center
Copy this page, fill it out and send it back to MTS Systemtechnik.Please don´t forget your address!
Company
Name Dpt.
Street
Post code Location
Phone Telefax
Answer to Fax-Nr.
0906/6661
About the selected products send me detailed information send me an offer call me
Systems and units Signal distribution units Antenna distrib. units / multi couplers Combiners Remote controlled switching units Filter units Ventilation units Matrices Coupling units Air interface adapters Shielding boxes
Components Coaxial relays Multi channel switches Videorelays Feedthrough terminations DC-blocks Fixed attenuators Terminations
Coaxial short circuits Power attenuators and power terminations Signal dividers, power splitters,combiners and
multi couplers Programmable step attenuators Coaxial cable assemblies Bias tees Directional couplers Impedance matching modules PC controlled components Amplifiers
Mechanical modules RF shielded enclosures Structural enclosures Custom specified enclosures Milled components Milled cassettes Cassette enclosures 19"-racks
Data technology Controller cards and accessories for operators
in electronic Control units Custom specified interface units Development of firm- and software
Services CAD development and customerspecified
CNC milled modules Mounting of components to and testing of RF
printed circuit boards Engineering-service Programming-service
Distribution forIMS Connector-Systems GmbH Coaxial connectors Terminations Coaxial adapters Coaxial cable assemblies
SystemtechnikRF-systems and -units
Data technology
Mechanical products
Systems and instruments42
Signal distribution units for
Video signals
LF, HF, VHF, UHF
Data signals / control units
PC controlled signal switching units
With standard relays
Customer-specified (for measurementusage)
With control software for windows
Matrices for
Audio signals
Video signals
LF, HF, VHF, UHF
Satellite communication
Microwave applications
Filter units
Coupling units
Air interface adapter
Shielding boxes
For testing GSM-modules within defined environmental influences
Possibility of operating the test modu-les during the test with remote control
Aluminum cover (closed) and furthercover with shielded wire mesh to ope-rate the test speciem manually (by closed box)
Systems and instruments
Please send us
Your inquiry!
Overview of components 43
Components
Coaxial relays for RF-and videoapplications
One-way and multi-way switches DC-2000 MHz, in 50 or 75 ohm , BNC-,SMA-,N-or other connectors
Low priced switches DC-1000 MHz,with SMA connectors
RF-relays CD-1700 MHz, SP2T and SP4T,with SMA connectors
RF-/video relays DC-1000 MHz, 50 or 75 ohm, with BNC connectors
Multi-way switches For RGB or RGBSsignals, DC-32 MHz, in 50 or 75 ohm
Coaxial relays modules with IEEE-488or RS-232-C-interface
Controller cards and interface modules
Signal dividers and power splitters
Attenuators
programmable step attenuatorsDC-2500 MHz, 0-63 dB, TTL, RS232,RS485
programmable semiconductor attenuators 200-4000 MHz, 0-93 dB
Manual adjustable step attenuators
fixed attenuators DC-18 GHz
Power amplifiers and small signal amplifiers
Coaxial components in 50 or 75
Impedance matching modules
DC-blocks
Coaxial cable assemblies
Ventilation plug in modules
Gewerbepark Ost 8D-86690 MertingenGermanyPhone+49(0) 9 078/ 91294-0 Fax +49(0) 9 078/[email protected]
Systemtechnik
RF-systems and -units
Data technology
Mechanical products
BelgiumMichael Decamp S.A./N.V. Rue de la Technologiestraat, 31 B-1082 Berchem-Ste-Agathe Tel: +32 67-41-17-60 Fax: +32 67-41-17-61 Web: www.decamp.be
GermanyTelemeter Electronic GmbHJoseph-Gänsler-Str. 10 D-86609 Donauwörth Tel: +49-90 67 06 93-0 Fax: +49-90 67 06 93-50 Web: www.telemeter.info
EnglandElion Electronics LTD54 High Street GB-Dormansland, Surrey Engl. RH7 6PYTel: +44-13 42-83 79 69Fax: +44-13 42-83 22 12 Web: www.elionelectronics.com
FrancePyrecap5 Place Salvador Allendé F-91124 Palaiseau Cédex Tel: +33-1-69 20 44 25 Fax: +33-1-69 20 52 75Web: www.pyrecap.com
ItalySupport Logistic ServicesVia Montenero 57/59I-00012 RomeTel: +39-0774363634 Fax: +39-0774572838Web: www.slsroma.it
AustriaKrenn Hochfrequenztechnik GmbHSimmeringer Hauptstr. 421A-1110 Wien Tel: +43-17 48 71 17-0 Fax: +43-17 48 71 17-90Web: www.krenn.at
SwedenRF Partner ABTaljegardsgatan 11 BS-43153 MölndalTel: +46-31 47 51 00 Fax: +46-31 47 51 21 Web: www.rfpartner.se
SwitzerlandTelemeter Electronic GmbHKirchstrasse 28CH-8574 Lengwil-Oberhofen/TGTel: +41-716 699 06 2020Fax: +41-716 699 06 2024Web: www.telemeter.info
SpainSematron Espana S.L.C/Alegria de Oria, 49-57E-28027 Madrid Tel: +34-91 741 23 00Fax: +34-91 320 58 71Web: www.sematron.es
International representatives
Sta
ndM
ai20
05