mimic group news 1

1
For any enquiries or a full range of or products feel free to contact Chantelle on (011)689-5742 or email: [email protected] PILOT LIGHTS SEMAPHORES STROBE LIGHTS DIGITAL CLOCKS BIG DIGIT DISPLAYS AX26 ERS-22//ERS-22-LP ND22 SERIES LED INDICATOR LIGHT APCO40-24D(24VDC)//APCO40-220A(220VAC) WDIND 4100-...(4 DIGIT PROGRAMMABLE) TOP QUALITY INDUSTRIAL DISPLAY’S USING LARGE BRIGHT 100mm DIGITS These units are for indoor use only, and are ideal for situations requiring a large clear display. The digits can be read from approx. 60m away (depending on ambient light), and models are available to operate off a variety of input signals :- e.g. 4-20mA, 0-10V, B.C.D etc... Voltages: 24VDC & 110V or 220VAC 110V AC - 100mA 220V AC - 50 mA • Candlepower: 900 000 • Flashes per min.: 120 • Acrylic lens with ABS base. Base Mounted. • Super-intensive light for construction sites, signboards, outdoors etc... • Colours: Red, green, yellow, blue or clear. 24V DC - 400mA 4 & 6 Digit Modbus versions also available 180mm heigh digits on special order Also available as 24hr clocks, counters or Elapsed Time Indicators •96x192mm Bezel •92x186mm Cutout •38mm LED Digits •12 or 24 hour format •Hours and minutes switchable to minutes and seconds for special functions. •Also available as elapsed time indicator. •Good accuracy, mains version counts frequency and 24V dc version has high accuracy oscillator. (On special order 238V AC version can be supplied to operate on the oscillation if the mains frequency is not stable; HOWEVER •in South Africa the mains frequency is very accurate). •Battery backup in case of mains failure (display blank but time is kept). •Optional setting buttons (front of lens, behind lens(std) or via terminals on rear for setting purposes). Low profile lense on High profile base High profile lense on High profile base The ND22 series indicators adopt super bright LED technology with low energy consumption. The special locking nut structure allows this indicator to be used for either a Ø22.5mm or a Ø25.5mm panel cut-out. Degree of protection is IP65. (The LED is not replaceable). ND22-BS ND22-BS ND22-BS ND22-BS ND22-BS ND22-B ND22-B ND22-B AC/DC 6V (ex indent) AC/DC 12V AC/DC 24V AC/DC 32-36V AC/DC 48V AC/DC 110V AC/DC 220V AC 380V (ex indent) Colours: Red, Green, Yellow, Orange, Blue or White. Two types of lens are available for all models. a) Low profile transluscent fresnel type. b) Medium profile fully diffused smooth type. c) f30mm adaptor available •Cutout: Ø22mm •24, 32, 60, 110 & 220V DC Only •Direct connect •Colours: Red (Large bar), Deep Green (Side bars). Other colours on special order •New low profile bezel matches with the •ND22 low profile pilot light range. •“Top of the range” semaphore. •Large bright, even bars with particularly •Good green (Blue - Green).

Upload: madammmc

Post on 27-May-2015

1.800 views

Category:

Documents


2 download

DESCRIPTION

MIMIC COMPONENTS NEWSLETTER 1 - ND22 SERIES LED INDICATOR LIGHTS

TRANSCRIPT

Page 1: Mimic Group News 1

For any enquiries or a full range of or productsfeel free to contact Chantelle

on(011)689-5742

or email: [email protected]

PILOT LIGHTS

SEMAPHORES

STROBE LIGHTS

DIGITAL CLOCKS

BIG DIGIT DISPLAYS

AX26

ERS-22//ERS-22-LP

ND22 SERIES LED INDICATOR LIGHT

APCO40-24D(24VDC)//APCO40-220A(220VAC)

WDIND 4100-...(4 DIGIT PROGRAMMABLE)

TOP QUALITY INDUSTRIAL DISPLAY’S USING LARGE BRIGHT 100mm DIGITS These units are for indoor use only, and are ideal for situations requiring a large

clear display. The digits can be read from approx. 60m away (depending on ambient light), and models are available to operate off a variety of input signals

:- e.g. 4-20mA, 0-10V, B.C.D etc...

Voltages: 24VDC & 110V or 220VAC

• 110V AC - 100mA 220V AC - 50 mA• Candlepower: 900 000• Flashes per min.: 120• Acrylic lens with ABS base. Base Mounted.• Super-intensive light for construction sites, signboards, outdoors etc...• Colours: Red, green, yellow, blue or clear.

24V DC - 400mA

4 & 6 Digit Modbus versions also available180mm heigh digits on special orderAlso available as 24hr clocks, counters or Elapsed Time Indicators

•96x192mm Bezel

•92x186mm Cutout

•38mm LED Digits

•12 or 24 hour format

•Hours and minutes switchable to minutes and seconds for

special functions.

•Also available as elapsed time indicator.

•Good accuracy, mains version counts frequency and 24V dc version

has high accuracy oscillator. (On special order 238V AC version can be supplied

to operate on the oscillation if the mains frequency is not stable; HOWEVER

•in South Africa the mains frequency is very accurate).

•Battery backup in case of mains failure (display blank but time is kept).

•Optional setting buttons (front of lens, behind lens(std) or

via terminals on rear for setting purposes).

Low profile lense on High profile base

High profile lense on High profile base

The ND22 series indicators adopt super bright LED technology with low energy consumption. The special locking nut structure allows thisindicator to be used for either a Ø22.5mm or a Ø25.5mm panel cut-out. Degree of protection is IP65. (The LED is not replaceable).

ND22-BSND22-BS ND22-BS ND22-BS ND22-BSND22-B ND22-BND22-B

AC/DC 6V (ex indent)AC/DC 12V AC/DC 24VAC/DC 32-36VAC/DC 48VAC/DC 110VAC/DC 220V AC 380V (ex indent)

Colours: Red, Green, Yellow, Orange, Blue or White.

Two types of lens are available for all models. a) Low profile transluscent fresnel type.b) Medium profile fully diffused smooth type.c) f30mm adaptor available

•Cutout: Ø22mm•24, 32, 60, 110 & 220V DC Only•Direct connect•Colours: Red (Large bar), Deep Green (Side bars). Other colours on special order

•New low profile bezel matches with the •ND22 low profile pilot light range.

•“Top of the range” semaphore.•Large bright, even bars with particularly•Good green (Blue - Green).