mini joystick usb manual - picomed.se · mini joystick usb manual manual ... load file : open an...

Mini Joystick USB Manual

Manual

Kontakt för mer information Leena Lundgren Tel: 070 - 228 71 19 Email: [email protected] www.picomed.se

HMC International NV Page: 1/16E3-Laan 89 - 9800 Deinze (Belgium)Tel +32 (0)9 381 09 50 - Fax +32 (0)9 381 09 [email protected] - www.hmc-products.com 0052-8001a-0119a

HMC USB CONFIGURATOR1 General

The HMC USB Configurator allows in an easy way to program the HMC International USB MouseInput devices.This manual explains how to install and how to use the HMC USB ConfiguratorThis manual explains how to setup the HMC International Input devices to adapt the device to theneeds of the user.


2 Using the HMC USB Configurator

2.1 How to open the HMC USB Configurator:

Click StartPoint to All ProgramsPoint to HMC InternationalClick HMC USB Configurator.For information about using HMC USB Configurator, click the Help menu in HMC USB

Configurator.

2.2 User Interface

2.2.1 Data Windows

2.2.1.1 Attached devices

Attached devices

Tree view Parameter data grid

Buttons

Status bar

Menus


This list box shows the attached HMC International USB devices to the PC. The list isautomatically refreshed when the application is started or each time an HMC International USBdevice is removed or attached.If only one device is found the application will automatically read and view the deviceconfiguration settings.

2.2.1.2 Configuration tree view

This window shows a tree build up with the configuration parameter folders (nodes).These folders contain their set of parameters that can be viewed and edited in the parameter gridview.Usage+ box : indicates that the folder is closed, click on the box to show the contents (parameter list) ofthe folder. More then one folder can be set open to have an overview of the parameters of thedevice.

-box : indicates that the folder is open, click on the –box to close the folder.

Double click on the parameter name: the focus is set on the selected parameter in the parameter datagrid view.


2.2.1.3 Parameter data grid window

If a folder or parameter has been selected in the left tree view then the data grid window shows theselected folder parameters and their values.

Cell colour schema

The parameter can be modified.

The parameter has been changed.


2.2.2 Menu bar

Device Menu items (click on the down arrow to drop down the menu)Scan : rescan the connected devices

View File : open an existing configuration file and show the print preview form(see Print preview). The open file dialog pops up the select the desired file.

Load File : open an existing configuration file and update/overwrite the parametersonly enabled if a device is connected and presented in the viewsAn open dialog pops up to select the desired file (see View file)


Save as : save the device configuration into a fileonly enabled if a device is connected and presented in the views

The tool proposes a filename in the following format:deviceName-serialNumber-YYYYMMDD.uid (usb input device)

Print Preview : shows a print preview of the actual presented device data.

Select the configuration or system log button for more the concerning information.

Configuration form System log form

When print button is clicked then the print dialog pops up to select the desired printer. Click

Exit : this menu item closes the HMC USB Configurator.

Help Menu itemsHelp Topics : this manual will be open in a separated window.


About : shows information about the HMC USB Configurator.

2.2.3 Buttons

2.2.3.1 Connect ButtonClick on the connect button to establish a connection with the selected device in the Device list box.When open succeeds the device configuration is read out and the node tree is build up.After reading, the button text will be changed to Close instead of Connect.

2.2.3.2 Close buttonClick on the Close button to disconnect from the open device. The tree view and data grid windowswill be cleared.

2.2.3.3 Read Device ButtonClick on the Read Device button to read the configuration of the device. The tree view and data gridwindows are cleared. The tree view will be refilled with the devices configuration.

2.2.3.4 Write ButtonClick on the Write Button will update the device his configuration with the modified values shownin the data grid window.The Write button is only enabled when values are modified.

2.2.3.5 Restore buttonClick on the Restore button to discard modified parameter values in the data grid view. The list willbe populated with the actual device configuration values.This button is only enabled when at least one parameter value is modified in the grid.

2.2.3.6 Set PresetsClick on the Set Defaults to overwrite the actual parameter values with the default value.

2.2.3.7 Clear ErrorsIf the treeview contains a error folder (in red color) then the this button is enabled. Click on thebutton will request the device to clear all errors. After the refresh of the views the error lists will not


be present as there are no errors are stored in the device error log.

2.2.4 Status bar

Left text field shows the connection stateconnecteddisconnected

Middle text field shows some information of the communicationLength F:4 I:8 O:8 : packet lengths (Features, Input, Output)Timeout : communication timed out

Progress bar (right field)Read out the configuration takes some time in execution, the progress bar shows how far the work

has progressed.

2.2.5 Editing a parameter value

! Cells with background colour set to light steel blue colours are read only and can not be edited.

2.2.5.1 Enter edit modeDouble click on the desired value cellSelect a cell (click on the cell, move up or down in the list with up or down arrow keys) and press

the <ENTER> key.

2.2.5.2 Edit numeric fieldsOnly digits are acceptedTo cancel editing press the <ESC> keyPress <Enter> key to validate the (new) value.

Validation is successful: edit mode is left and the new value is shown with a yellow background(new value) or aquamarine background (original value).

Validation fails: a pop-up will appear to indicate the value is not valid, this is the case when thevalue is out of range.

The message text explains what the legal range is and gives also some example values.


2.2.5.3 Edit cells with preset values

If a cell of this type is entered for editing then a list box with predefined values will appear at thelocation of the selected cell. In the list the actual value is high lighted.

A new value is accepted by clicking on a line in the list box.With the up and down arrow the user can scroll in the list and accept the selected value withpressing the <ENTER> key.<ESC> key will cancel the edit mode.

A new value is shown with a yellow background (new value) or aquamarine background (originalvalue).


3 Installing the HMC USB Configurator

3.1 StartOpen the installer file (ex. HmcUsbConfigrator.msi).The installer application will start and guide the user through the installation procedure.The installation takes some seconds to complete.

If no additional components need to be installed then the following section will be skipped andinstallation continuous at 3.3 Application installation

3.2 Update system when required components are not yet installedThe installer checks the system for required components. If one or more components are not foundthen the installer will take care to download and install the required components. Make sure youhave a connection to the internet.

Press the <Accept button> to start the installation. Installation can take some time to completedepending of the number and type of component to be installed.


3.3 Application installation

Press <Install> Button

The installation is complete and the application is started up.


4 Programming the devices

4.1 Mini Joystick & Compact Joystick

4.1.1 Device settingsThese sections view identification data of the connected device.Device

Type identification numberCompact Joystick:1001-0001, Mini Joystick:1001-0007Serial Number serial number of the deviceSoftware Version firmware software version number

4.1.2 Joystick settingsThese sections show the editable parameters that define the behaviour of the joystick.Joystick

Swap Joystick Axes Both axes are exchangedForward/Reverse are translated to Right/Left actions andRight/Left become the Forward/Reverse actions

Invert Fwd Rev. JS Axis Forward direction results into the reverse action and viceversa.

Invert Left Right JS Axis Left direction results into the right action and vice versa.

Joystick Dead band This sets the size of the joystick’s neutral area.The range is 5% to 50% in 1% steps. A normal setting is5%.

Joystick Forward Throw This sets the amount of movement is needed to reach fullforward speed. The range is 25% to 100% in 1% steps.The normal setting is 100%.

Joystick Reverse Throw This sets the amount of movement is needed to reach fullforward speed. The range is 25% to 100% in 1% steps.The normal setting is 100%.

Joystick Left Throw This sets the amount of movement is needed to reach fullleft turning speed. The range is 25% to 100% in 1%steps.The normal setting is 100%.

Joystick Right Throw This sets the amount of movement is needed to reach fullleft turning speed. The range is 25% to 100% in 1%steps.The normal setting is 100%.


4.1.3 Mouse settingsThis section shows the editable parameters that define the mouse behaviour.

MouseSwitch 1-1Switch 1-2Switch 2-1Switch 2-2

Off No functionality assignedLeft Acts as the mouse left buttonRight Acts as the mouse right buttonMiddle Acts as the mouse middle wheel buttonLeft Hold Acts as an on/off switch for the mouse left buttonMiddle Hold Acts as an on/off switch for the mouse wheel buttonDouble Click Left Acts as a double click of the left mouse buttonScroll Up Acts as the scroll wheel up direction actionScroll Down Acts as the scroll wheel down direction action

Motion Speed This sets the maximum movement speed of the mouse pointeron the screen. The range is 1 to 20 in steps of 1. A normalsetting is 10.

Scroll Speed This sets the maximum scroll speed. The range is 1 to 10 insteps of 1. A normal setting is 5.

Tremor Time This parameter can be used to reduce the effects of a user’shand tremor. This sets the amount of time the button levelshould be stable. The range is 20 to 2000 in steps of 1.


5 Safety and Misuse Warnings

Important warnings about the installation and the use of the device (preferable continuoustext with tables or enumerations added).

Goals: warn the installer and protect the manufacturer of the device in case of problems.

Sample Text:

Attention:

o Do not install or operate the Joystick without reading, understanding and followingthe proper instructions, as well the installation and/or user manuals for thepowerchair and any other system components, otherwise injury or damage mayresult.

o Joystick installation and controller system programming should only be conductedby healthcare professionals or qualified persons fully conversant with the Joystickand the Powerchair controller configuration. Incorrect configuration, installation orprogramming could result in an unsafe set-up of the powerchair for the user. Themanufacturers accept no liability for losses of any kind resulting from suchconditions.

o After the powerchair has been set up, it should be checked to ensure the entireconfiguration performs according to user specifications. If the powerchair does notperform to specifications, turn the powerchair off immediately and repeat theprocedures until the powerchair performs as desired. Completed installation mustbe thoroughly checked for safe operation prior to use.

o We strongly advise that the user be instructed on proper use of the Joystick, as wellas the on/off switch or additional emergency switch. A warning must be conveyed tothe user that they bear responsibility to ensure the powerchair is kept in a good safeoperating condition and to ensure all components and cables are protected fromdamage by securing in optimum position.

o The user should turn off the system while getting in and out of the powerchair.Ensure the power switch is turned off when the powerchair is not in use.

o If the powerchair operates erratically, or shows abnormal response, or either of thetwo LEDs on the interface (red LED marked MJ status; green LED marked DXstatus) flashes during use, release the joystick, turn off the system and consult theService Agent.

o As the Joystick can be easily moved, please take care to install it in a positionwhere it cannot be moved by accident or damaged.

o Route and secure all cabling in such a way to prevent damage by crushing, cuttingor snagging.

o The Joystick may be adversely affected by strong magnetic fields in close proximityto the Hall sensor. To minimise the risks of unintentional movement or otherundesirable actions, keep the Joystick away from all strong magnetic fields such asthat present with the DX magnetic locking key.


6 Troubleshooting

6.1 No device names appear in the list box.Verify if the USB connection.Verify if the device does not report a severe failure (Led indicator).Reconnect the device.

6.2 The device name appears in the format VIDvvvv&PIDppppThe device is unknown by the application. Install the latest version of the application.

6.3 Popup Parameter value out of range

The edited value is out of range, read the message to understand what the legal range of values is.Press OK to correct the value or press the “Restore” or “Set Defaults” button.

6.4 Popup Changes not stored

Pops up when Close button is pressed and there is at least one parameter changed in the data gridand not yet written to the device.PressOK: discard changes and open the newly selected folder.Cancel: discard the selection and proceed with processing of the actual open folder


7 Content

1 GENERAL ............................................................................................................................................................... 1

2 USING THE HMC USB CONFIGURATOR ....................................................................................................... 2

2.1 HOW TO OPEN THE HMC USB CONFIGURATOR: .............................................................................................. 22.2 USER INTERFACE.............................................................................................................................................. 2

2.2.1 Data Windows............................................................................................................................................. 22.2.2 Menu bar..................................................................................................................................................... 52.2.3 Buttons ........................................................................................................................................................ 72.2.4 Status bar .................................................................................................................................................... 82.2.5 Editing a parameter value .......................................................................................................................... 8

3 INSTALLING THE HMC USB CONFIGURATOR......................................................................................... 10

3.1 START............................................................................................................................................................. 103.2 UPDATE SYSTEM WHEN REQUIRED COMPONENTS ARE NOT YET INSTALLED ................................................... 103.3 APPLICATION INSTALLATION .......................................................................................................................... 11

4 PROGRAMMING THE DEVICES .................................................................................................................... 12

4.1 MINI JOYSTICK & COMPACT JOYSTICK .......................................................................................................... 124.1.1 Device settings .......................................................................................................................................... 124.1.2 Joystick settings ........................................................................................................................................ 124.1.3 Mouse settings........................................................................................................................................... 13

5 SAFETY AND MISUSE WARNINGS................................................................................................................ 14

6 TROUBLESHOOTING........................................................................................................................................ 15

6.1 NO DEVICE NAMES APPEAR IN THE LIST BOX. ................................................................................................. 156.2 THE DEVICE NAME APPEARS IN THE FORMAT VIDVVVV&PIDPPPP ................................................................ 156.3 POPUP PARAMETER VALUE OUT OF RANGE ..................................................................................................... 156.4 POPUP CHANGES NOT STORED ........................................................................................................................ 15

7 CONTENT ............................................................................................................................................................. 16

mini joystick usb manual - picomed.se · mini joystick usb manual manual ... load file : open an...

Documents