mini woodworking tools - chisels - sharpening · pdf filemini try square david use photo...

MINI TRY SQUARE

DAVID USE PHOTO

SD0010

CONTENTS

MINI WOODWORKING TOOLS - CHISELS - SHARPENING STONES

ABRASIVE PAPERS 218 - 219ANGLE FINDERS 210AWLS 207BRADAWLS 207BURNISHER 214CABINET SCRAPERS 214CARPENTERS PENCILS 206 - 207CARPENTERS SQUARES 209 - 210CHALK LINE MARKER 213COMBINATION SQUARES 209 - 210CONTOUR SANDER 218CUPPED NAIL PUNCHES 216DIAL ANGLE & LEVEL FINDER 210DIAMOND SHARPENERS 220 - 221FOLDING RULES 211GRINDING ANGLE CHECKER 220HAND DRILL 221HONING GUIDE 220LOOM-A-LINE JIG 206MALLETS 216MARINE MODELLERS TOOLS 206MARKING GAUGES 208MARKING KNIVES 207MULTIRASPS 217NON-SLIP GRIP MATS 222OILSTONES 220PENCIL COMPASS 208PERMA-GRIT SANDING TOOLS 219PLANES 213 - 214PLANK BENDERS 206PLUMB BOBS 213PROFILE GAUGES 211PYROGRAPHY TOOLS 221 - 222RASPS 216 - 217SAFETY SCRAPER 214SANDING BLOCKS & PAPER 218 - 219SCRATCH AWLS 207SHARPENING STONES 220 - 221SLIDING BEVELS 209SPIRIT LEVELS 212SPOKESHAVES 214STEEL WOOL 220STRIP CLAMP & KEEL KLAMPER 206TACK LIFTER 216TAPE MEASURES 211TWIST GIMLET 207WATERPROOF ABRASIVE PAPE 218 - 219WELLER PYROGRAPHY TOOLS 222WOODBURNING STATION 222WOOD CARVING TOOLS 215 - 216WOOD CHISELS 215 - 216

MINI SPOKE SHAVE

DAVID USE PHOTO

ZON320

CARVING TOOLS

DAVID USE PHOTO

SD0010

SHARPENING STONES

DAVID USE PHOTO

SST249

WOOD BURNING STATION

DAVID USE PHOTO

53120

205Last Revised 14/07/11

206

SQUIRES MODEL & CRAFT TOOLS

TEL. 01243 842424 - FAX. 01243 842525

MARINE MODELLERS TOOLS

STRIP CLAMP AND KEEL HOLDER the primary use for this toolis as strip clamp when making miniature planking. It allows a thinpiece of wood to be cut along the grain without the knife beinginfluenced by the grain of the wood. It has 10½" steel coveredjaws which hold the wood firmly, the knife or scalpel is guidedalong the steel jaws. The jaws can accommodate up to 5mm thick-ness and have a quickrelease action. A further usefor this tool is as a keel clamp.Manufactured from tough nylon and supplied witha table fixing clamp.

CODE TYPE PRICECL8155 Strip Clamp........................................................... £29.99

MUTLI BENCH CLAMP an impressively useful tool that can beused for holding the a range of items while glueing, painting andcontruction. The base will clamp up to 50mm thick work surfaceand features a multi-position swivel joint, allowing variation ofangle and pitch thatthe object is beingheld. The 2 clampson the bar areadjustable, themaximum spread theof clamps is 35cm.

CODE TYPE PRICE160-800 Multi Bench Clamp............................................... £34.99

KEEL KLAMPER originally designed for holding the keel of amodel boat during construction, it can also be used to hold a rangeof items during construction or painting etc. The Keel Klampersheavy metal base holds a ball joint which can be tilted to about 45°and swivelled through 360°, the ball joint can be locked in position.Connected to the ball joint via a small shaft is an aluminium barwhich has 2 clamps mounted to it. The clamps can be movedalong the bar and locked in position. The adjustable nylon jaws ofthe clamps are lightlyserrated for a firm gripto the object. The jawsopen to about 1cm.Supplied with 2 tableclamps or can screweddown to a bench.

CODE TYPE PRICECL7382 Keel Klamper........................................................ £69.99

LOOM-A-LINE a handy rigging jig for the model shipwright, Loom-a-line is used for tying rat linesfor historic model ships. Usingthe jig allows the correct tensionand perfect knots to be tied.When complete the riggingcan then be fitted to themodel. The frame is suppliedwith moveable brass pins andhas numbered locating holes.

CODE TYPE PRICEAM7380 Loom-a-Line Rigging Jig....................................... £13.99

PLANK BENDING a handy tool used when bending miniatureplanking as in model boat building and other applications requiringsmall planks to be bent over a frame. Manufactured from toughplastic and has a very sharp blade held in one jaw. After produc-ing the small strips for the planking, the tool is then used to crimpsmall notches in thereverse side of the plank,these notches allow theplank to bend easilywithout breaking.Spare blades areavailable.

CODE TYPE PRICE160-040 Plank Bending Tool.............................................. £9.99160-041 P/Bending Tool Spare Blades Pk of 5 & Holder... £3.15

PLANK AND METAL BENDER a handy tool used for bendingminiature planking as in model boat building and other applicationsrequiring small planks to be bent over a frame. The Plank Benderis manufactured from glass reinforced nylon and is supplied with 3sets of jaws. The first set have a sharp blade held in one jaw thisis used to crimp the reverse side of the planking. The other sets ofjaws are used for bending copper, brass, tin and aluminium stripsup to 0.6mm thickness,fine wire can also beshaped. One set isused for rounded bendsthe other for bending45° and 90° bends.Maximum width ofstrip 25mm.

CODE TYPE PRICEMM8151 Plank And Metal Bender....................................... £14.99

PLANK BENDING MACHINE an ingenious tool used for bendingminiature planking as used in model boat building or whereversmall planks need to be bent over a frame. After producing thesmall strips that will form the planking they are simply fed throughthe rollers of the machine. The machine is turned by hand, theroller has heavy grooves which make small notches on the reverseside of the plank, and passing the planking through the rollers alsoinduces a bend into the strip. The result is a plank that is easilylaid without breaking.The machine can be adjusted for differentthickness of materialand 3 roller sizes havebeen built into themachine. Manufacturedfrom tough nylon.

CODE TYPE PRICEMM8150 Plank Bending Machine........................................ £12.99

CARPENTERS PENCILS

CARPENTERS PENCIL a traditional pattern broad lead carpen-ters pencil.

CODE TYPE PRICEWWCP01 Carpenters Pencil x1............................................ £0.20WWCP10 Carpenters Pencil x10.......................................... £1.50


E-mail: sales@squirestools .com - www.squirestools .com 207

BLACKEDGE CARPENTERS PENCILS a range of traditional pat-tern broad lead carpenters pencils. Available in Hard, Medium andSoft grades. Sold individually.

CODE TYPE PRICE160-000 Blackedge Carpenters Pencil - Green Hard x1.... £1.06160-002 Blackedge Carpenters Pencil - Red Medium x1... £1.06160-004 Blackedge Carpenters Pencil - Blue Soft x1......... £1.06

CARPENTERS PENCIL SHARPENER for use with traditionalbroad pattern carpenters pencils. It incorporates an abrasivestone for fine points. Designed for use with flat carpenters pencilsas well as conventional round profile pencils.

CODE TYPE PRICE71283 Carpenters Pencil Sharpener............................... £4.50

3 CARPENTERS PENCILS AND SHARPENER three traditionalbroad pattern carpenters pencils with medium lead, supplied with asharpener. The sharpener incorporates an abrasive stone for finepoints. Designed for use with flat carpenters pencils as well asconventional round profile pencils.

CODE TYPE PRICE71284 3 Carpenters Pencils and Sharpener................... £4.99

BRADAWLS

BRADAWL a traditional pattern bradawl with beechwood handle,brass ferrule and round steel blade.

CODE TYPE PRICE160-916 Bradawl Round Blade........................................... £4.20

CROWN BRADAWL a square blade bradawl with a teardropRosewood handle and brass ferrule. High carbon steel blade.Made in Sheffield.

CODE TYPE PRICE110SR Crown Square Blade Bradawl.............................. £8.99

DRAPER TRADITIONAL PATTERN BRADAWL a traditional pat-tern bradawl with a polished beechwood handle and brass ferrule.

CODE TYPE PRICE88230 Draper Traditional Pattern Bradawl...................... £4.79

DRAPER SQUARE BLADE BRADAWL a square blade bradawlthat can be used on leather, plastic or wood. With a polishedbeechwood handle, brass ferrule and square pointed blade.

CODE TYPE PRICE88231 Draper Square Blade Bradawl.............................. £6.69

TWIST GIMLET

TWIST GIMLET with a tool steel blade firmly fixed in a shapedplastic handle. A simple but effective tool for boring starter holes,the screw point pulls thetool into the wood, thelarge flute clears thewaste effectively.

CODE TYPE PRICE29517 Twist Gimlet Blade 3.0mm.................................... £1.95

MARKING KNIVES & SCRATCH AWLS

MINI MARKING KNIFE a rosewood mini marking knife bevelled onone side for right handed use. Ideal for accurate marking. Length180mm.

CODE TYPE PRICE160-518 Mini Marking Knife Right Hand............................. £2.09

CROWN MARKING KNIFE manufactured in Sheffield from highquality carbon steel, hardened and tempered with a rivettedRosewood handle. The blade is 2" x 1" and bevelled on one sideonly for accurate marking. Length overall 6".

CODE TYPE PRICECMK112 Crown Marking Knife 6" Right Hand..................... £4.99160-112 Crown Marking Knife 6" Left Hand....................... £4.99

CARPENTERS SCRATCH AWL an economically priced generalpurpose awl. It has a plated chrome vanadium steel blade and ashaped plastic handle.

CODE TYPE PRICE64747 Carpenters Scratch Awl........................................ £2.65

CROWN SCRATCH AWLS used for marking when measuring out,the blade is high carbon steel, hardened and tempered. Fitted withRosewood handle with brass ferrule. Made in Sheffield. Availablewith 2½"and 5"blade.

CODE TYPE PRICE114RX Crown Scratch Awl 2½"........................................ £8.49114R Crown Scratch Awl 5"........................................... £8.79

208


TEL. 01243 842424 - FAX. 01243 842525

PENCIL COMPASS

CARPENTERS PENCIL COMPASS & SCRIBER a brass platedsteel carpenters compass for marking contours and circles, capaci-ty 8" diameter. It has positive wing nut adjustment, hardened steelpin which can also be used as a scriber for marking wood andother soft materials.Supplied withoutpencil. Made in USA.

CODE TYPE PRICE160-843 Carpenters Pencil Compass/Scriber No 843/1..... £5.50

CARPENTERS PENCIL COMPASS & SCRIBER a die cast metalrust resistant carpenters compass for marking contours and cir-cles, capacity 9" diameter. It has spring tension adjustment, hard-ened tool steel pin which can also be used as a scriber for markingwood and other soft materials. Supplied with pencil. Made inUSA.

CODE TYPE PRICE160-842 Carpenters Pencil Compass/Scriber No 842........ £11.99

MARKING GAUGES

MINI MARKING GAUGE a mini marking gauge with hardwoodbody, knurled brass adjusting screw and single hardened adjustingspur. Length 130mm.

CODE TYPE PRICE160-106 Mini Marking Gauge 130mm................................ £4.50

CROWN MINIATURE MARKING GAUGE a 5" marking gaugemade from polished rosewood with a single hardened marking pinand brass screw.Manufacturedin Sheffield.

CODE TYPE PRICEC138M Crown Marking Gauge 5".................................... £7.99

CROWN BEECH MARKING GAUGE standard pattern manufac-tured from finest kiln dried beechwood, fitted with plastic thumb-screw. Manufactured in Sheffield. Length 8".

CODE TYPE PRICEC135 Crown Beech Marking Gauge 8".......................... £4.99

MINI MORTICE GAUGE a mini mortice gauge with a hardwoodbody with deep coat lacquer finish. Knurled solid brass adjustingscrew with inlaid brass wear faces and brass slide. Two hardenedmarking spurs. Length 130mm.

CODE TYPE PRICE160-764 Mini Mortice Gauge 130mm................................. £7.99

CROWN MARKING AND MORTICE GAUGE 5" a combinedmarking and mortice gauge made from polished rosewood with 3hardened marking spurs and brass screw. Made in Sheffield byCrown Hand Tools.

CODE TYPE PRICEC152M Crown Combined Marking Gauge 5".................... £11.99

MORTICE GAUGE a mortice gauge with a hardwood body withdeep coat lacquer finish and knurled brass adjusting screw, inlaidbrass wear faces and brass slide. 3 hardened marking spurs.Length 230mm.

CODE TYPE PRICE160-503 Mortice Gauge 230mm......................................... £13.99

CROWN MARKING AND MORTICE GAUGE an 8" combinedmarking and mortice gauge made from polished rosewood with 3hardened marking spurs, brass screw and is fitted with a brassslidescrew adjustment for precision adjustments. Made inSheffield by Crown Hand Tools.

CODE TYPE PRICE160-154 Marking & Mortice Gauge with Slidescrew 8"....... £34.99

CROWN CUTTING GAUGE a miniature marking gauge with ahardened blade which is used for marking cross grain. A com-bined marking and mortice gauge made from polished hardwoodwith 3 hardened marking spurs and brass screw.

CODE TYPE PRICEC143M Crown Cutting Gauge 5"....................................... £9.99



SLIDING BEVELS

SLIDING BEVEL a low cost miniature sliding bevel with a polishedhardwood stock with brassend. The blued steel bladeis 95mm. Stock length 64mm.

CODE TYPE PRICEWSB07 Sliding Bevel 93mm.............................................. £3.99

ADJUSTABLE BEVEL an adjustable bevel with polished hard-wood stock. Solid brassend caps and adjustingwing nuts. Length 190mm.

CODE TYPE PRICE160-071 S/L Adjustable Bevel 190mm............................... £6.50

CROWN SLIDING BEVELS a range of sliding bevels with polishedrosewood stock, brass end and wing nut. The blued steel blade is95mm. The miniature bevelhas a stock length of 64mm,the stock length of the

190mm type is 130mm.Manufactured by CrownHand Tools inSheffield to BS3322.

CODE TYPE PRICEC115M Crown Miniature Sliding Bevel 93mm................... £7.99160-120 Crown Sliding Bevel 190mm................................ £11.25

CARPENTERS SQUARES

MINI ROSEWOOD TRY SQUARE the stock is made from polishedhardwood, brass faced with three brass rivets securing the steelblade. Ideal for laying outprecise 90° angles, checkinginternal angles, marking stockor using as a guide for mortising.

CODE TYPE PRICE160-209 Mini Rosewood Try Square.................................. £3.99

CROWN TRY SQUARES a range of try squares with a brassfaced polished rosewood stock. The blued steel blade is securelyheld with 3 rivets. The miniature type has a 67mm stock, the stocklengths of the 4" and 6" types is80mm and 124mm respectively.The 6" type also has a hanginghole. Manufactured in Sheffieldto BS3322.

CODE TYPE PRICEC123 Crown Miniature Rosewood Try Square............... £9.20160-124 Crown Rosewood Try Square 4".......................... £9.99160-125 Crown Rosewood Try Square 6".......................... £10.99

CROWN TRY/MITRE SQUARE a miniature try/mitre square with abrass faced polished rosewood stock. The blued steel blade issecurely held with 3 rivets.67mm stock. Manufacturedin Sheffield.

CODE TYPE PRICEC133M Crown Miniature Try/Mitre Square........................ £10.99

MITRE SQUARE a mini mitre scale with blued steel blade withsolid brass reference face. Provides perfect reference for markingout mitre joints. Hard-wood stock with 4 brassrivets ensures a securefixing and long life.Blade length 112mm.

CODE TYPE PRICE160-168 Mini Mitre Square 112mm.................................... £4.50

CROWN MINIATURE DOVETAIL SQUARES miniature dovetailsquares with a brass faced polished Rosewood stock. The 1:6dovetail is used for softwoods, the1:8 dovetail is used for hardwoods.The blued steel blade is securelyheld in the stock with 3 rivets.67mm stock. Made in Sheffield.

CODE TYPE PRICEC1236M Crown Mini Dovetail Square 67mm 1:6................ £10.99C1238M Crown Mini Dovetail Square 67mm 1:8................ £10.99

COMBINATION SQUARES

L/C COMBINATION SQUARE can be used as a 45° level, aheight gauge, a marking out gauge, an outside try square, spiritlevel, rule etc. The metal stock has polished faces, a mini spiritlevel and a scriber.The steel blade isgraduated on both sides, metric on oneedge and imperial onthe other. Availablewith 6" and 12" rule.

CODE TYPE PRICE160-850 L/C Miniature Combination Square 6" Rule.......... £3.99160-858 L/C Miniature Combination Square 12" Rule........ £7.99

FISHER COMBINATION SQUARE can be used as a 45° level, aheight gauge, a marking gauge, an outside try square, spirit level,rule etc. The metal stock has polished faces, a mini spirit level anda scriber. The aluminiumblade is graduated onboth sides, metric on oneedge and imperial on theother. Availablewith 6" rule.

CODE TYPE PRICEWWCS02 Fisher Miniature Combination Square 6" Rule..... £6.45

POST FREE DELIVERY ON ALL ORDERSWITHIN THE UNITED KINGDOMMINIMUM ORDER VALUE £15.00

210


TEL. 01243 842424 - FAX. 01243 842525

FISHER COMBINATION SQUARE WITH ANGLE FINDER mattblack diecast stock with machined faces, brass adjusting screwand scriber. The tool incorporates an angle finder with 1° gradua-tions through 360°. The aluminium rule is graduated in mm and1/8" and 1/32" on opposite sides. Length 12".

CODE TYPE PRICE160-495 Fisher Combination Square with Angle Finder..... £11.70

COMBINATION SQUARE diecast stock with machined faces,brass adjusting screw and scriber. The tool incorporates a centrehead and a protractor set which has a second built-in level. Theprotractor allows any angle between 0-180° in either direction.The steel rule is graduated in 1/8" and 1/32" on opposite sides. Allthe accessories are removable and fully adjustable. Length 12".

CODE TYPE PRICE160-532 L/C Combination Square with Centre Head......... £9.99

FLAT MARKING OUT RULER/SQUARE a one piece flat squareuseful for measuring and marking out on flat material such as foamboard and polystyrene sheet. The square is steel with a black fin-ish and has metric and imperial markings. Although it is not a pre-cision tool, it is useful addition to the modellers workbench. Dims200 x 300mm.

CODE TYPE PRICE040-894 L/at Marking Out Ruler/Square 200x300mm........ £4.50

ADJUSTABLE T SQUARE 24'' made from a light alloy steel, canbe used for measuring various angles and is ideal for woodworkingand many other marking out applications. Size 660mm x 360mm.

CODE TYPE PRICE160-211 Adjustable T Square 24''/600mm.......................... £8.99

ANGLE FINDERS

ANGLE FINDER used for checking angles, marking out and mak-ing comparative measurements. The protractor plate is graduated0-180° in opposite directions and the arms may be locked in posi-tion. Protractor plate dims:- 100 x 50mm.

CODE TYPE PRICECTAF02 Angle Finder - Plastic........................................... £4.50

ANGLE MEASURER a simple device that gives a direct reading ofcorner angles in the range 25° to 165° and it also gives an auto-matic readout of the half angle needed for cutting mitre joints. It ismanufactured with anodised aluminium arms with clear anglemarkings. Length overall 380mm.

CODE TYPE PRICE040-111 Angle Measurer 25° to 165°................................. £7.99

DIAL ANGLE & LEVEL FINDER

INCLINOMETER ideal for roofing, scaffolding and general anglemeasurement. Clear and easyto read dial divided into 90°quadrants. It has a durable100mm diameter plastichousing with a convenientmagnetic base.

CODE TYPE PRICE040-471 Inclinometer.......................................................... £4.99

CK ANGLE FINDER/SETTER a versatile product intended for usewith a straight edge or spirit level. The straight edge or level isplaced on the edge of the object that is being measured, the anglefinder is placed onto the level. The vile is held in a dial that isgraduated 0 - 90° in 5° increments in 2 quadrants of the dial. Thedial is turned so the bubble is level, the angle can then be readfrom the pointer. Manufactured from aluminium. Dial diameter50mm.

CODE TYPE PRICE160-493 CK Angle Finder/Setter......................................... £9.99



FOLDING RULES

FOLDING RULES two types of these useful rules are available, aplastic type manufactured from tough impact resistant ABS plasticwith clear graduations of mm/cm on one side, imperial on the othergraduated in 1/8". The hardwood folding rule has black gradua-tions and solid brass hinges and tips. Metric on one side showingcm, mm. Imperial on the reverse showing inches and 1/8". Lengthoverall 1M/39",folding downto 10½".

CODE TYPE PRICE12392 Plastic Folding Rule 39"....................................... £8.2536522 Hardwood Folding Rule 39".................................. £9.99

TAPE MEASURES

HI-VIS' TAPE MEASURES brightly coloured easy to find tapemeasures. Each has a lockingbutton, power return and cleargraduations in metric and imperial.Self aligning end hook for accurateinternal/external measurements.Fitted with a belt hook.

CODE TYPE PRICE040-133 Hi-Vis Tape Measure 3 Metre............................... £1.25040-750 Hi-Vis Tape Measure 5 Metre............................... £1.85040-321 Hi-Vis Tape Measure 8 Metre............................... £3.65

REWIND MEASURING TAPE a durable rubber, impact-resistantcasing with belt clip. Withstands knocks and bumps of everydayuse. Rewind handle foldsaway within casing. The25mm blade has a 3-rivettip and magnetic end-hook.Metric/imperial graduationsconform to EEC class II.

CODE TYPE PRICE160-137 Rewind Tape 15M................................................ £8.99

FIBRE GLASS TAPE MEASURES long surveyors tape measureswith an easy to read 13mm wide fibre glass reinforced tape.Metric reading in 2mm graduations.Imperial reading 1/8ths. Containedin a plastic case fitted with rollers toensure easy running and handle foreasy re- winding and an end clawis fitted to the end.

CODE TYPE PRICE040-037 Fibre Glass Tape Measure 10 Metre ................... £4.99040-038 Fibre Glass Tape Measure 30 Metre.................... £8.99040-040 Fibre Glass Tape Measure 50 Metre.................... £11.99

MEASURING WHEELS

MICRO MEASURING WHEEL the telescopic shaft extendsbetween 350 and 810mm. Durable patterned handle for extra grip.Clear and easy to read metric dial measuring 0 - 999m with anaccuracy of +/- 2%.

CODE TYPE PRICE040-436 Micro Measuring Wheel 0 - 999M......................... £14.99

MINI MEASURING WHEEL a compact, foldaway mini measuringwheel with distance range of0-9999m. The comfortabletelescopic handle extends460-900mm. Sturdy dualwheels give good stabilityand analogue display containsan instant zero button.Foldaway wheel for storageinto canvas carrying bag.

CODE TYPE PRICE040-077 Mini Measuring Wheel 0 - 9999M......................... £24.99

PROFILE GAUGES

METAL PROFILE GAUGE a low cost profile gauge with steelblades. Used to copyawkward shapes andprofiles. Length 5".

CODE TYPE PRICEPG0969 Profile Gauge Metal 5"......................................... £2.50

PROFILE GAUGE used to copy awkward shapes and profiles, andthey are ideal for pattern and model making, wood working, repairsetc. Corrosion proof easy clean plastic blades. 2 sizes are avail-able.

CODE TYPE PRICEPG908A Profile Gauge 5"................................................... £7.99PG908B Profile Gauge 10"................................................. £12.45

VITREX PROFILE GAUGE instantly copies awkward shapes,ideal for pattern and model making, wood working and repairing.Corrosion proof easyclean plastic blades.Length 6½".

CODE TYPE PRICEVT1030 Vitrex Profile Gauge............................................. £13.99


212


TEL. 01243 842424 - FAX. 01243 842525

TRAMMEL POINTS

"PERFECT MARKER" TRAMMEL POINTS ideal for marking outand layout work. Secures easily to most standard spirit levels,used for marking and scribing circles and radi.

CODE TYPE PRICE160-185 "Perfect Marker" Trammel Points........................ £2.99

MINIATURE SPIRIT LEVELS

MINIATURE SPIRIT LEVEL 100MM an ABS moulded level withone horizontal and one vertical acrylic vial. The mini level has anaccuracy 1.75mm per1M = 0.1° in standardposition. Dimensions:- 100 x 35 x 13mm.

CODE TYPE PRICE69561 Draper Mini Level 100mm.................................... £2.79

CIRCULAR SPIRIT LEVEL a pocket-sized 32mm diameter levelwith plastic body. Ideal for determininglevel surfaces on workbenches andsubsequent positioning of pillar drillsand mitre saws.

CODE TYPE PRICE160-457 S/L Circular Spirit Level........................................ £1.50

S/L TWO WAY MINI LEVEL ideal for determining level surfaceson work benches and level positioningof pillar drills and mitre saws.Pre- drilled for easy permanentinstallation. Durable plastic body.

CODE TYPE PRICE160-450 S/L Two Way Mini Level....................................... £1.79

TWO DIRECTIONAL SPIRIT LEVEL a miniature spirit level with 2acrylic vials set at 90° to each otherin an ABS base. Levels a surface inall directions at the same time.Dimensions:- 60mm x 45mm.

CODE TYPE PRICEGALM11 Two Directional Level........................................... £4.99

S/L POCKET LINE LEVEL a pocket size plastic line level withmoulded line hooks. Lightweight to prevent line sag. Useful andeasy to use.

CODE TYPE PRICE160-443 S/L Pocket Line Level........................................... £0.75

DRAPER LINE LEVEL a miniature line level manufactured fromimpact resistant plastic. It incorporates a pocket clip, line suspen-sion hooks and V grooved ends. It can be used to check any sur-faces including pipework. Accuracy 1.75mm per 1M = 0.1° in stan-dard position.

CODE TYPE PRICE69562 Draper Miniature Line Level 78mm...................... £2.99

9" TORPEDO LEVEL a small spirit level with 3 unbreakable vials,one vertical, one horizontal and one at 45°, set in an ABS basewith a magnetic strip on the base. The level has an accuracy of1mm/1M in the normal position. Length 228mm x 38mm x 15mm.

CODE TYPE PRICEGAL503 9" Torpedo Level.................................................. £1.99

TORPEDO LEVEL a cast aluminium level with machined base. Ithas 2 vials for level and plumb. Length 300mm.

CODE TYPE PRICE160-501 Torpedo Level 300mm.......................................... £3.99

POST LEVEL a 90° moulding with 3 vials. The level is held ontoan upright with an elastic band.The 2 horizontal vials are usedto check for upright. Can alsobe used to check beams andjoists for level and twist.Dims 80 x 80 x 120mm.

CODE TYPE PRICE160-502 Post Level............................................................. £2.79

600MM ALUMINIUM RULE WITH LEVEL of heavy duty alumini-um construction with both metric and imperial graduations. Thehandle is fitted with two vials, one plumb and one level. Length24"/600mm.

CODE TYPE PRICE160-035 Aluminium Rule with Level 600mm...................... £6.99

LASER STRAIGHT an impressive little tool, ideal for a range ofmarking out applications by projecting a 50ft laser line. Adheres tomost surfaces and comes with reusable adhesive which leaves nomarks behind. Built-in level bubbles, projects a perfectly straightline on any surface. Requires 2 x AAA batteries (not included).

CODE TYPE PRICE160-482 Laser Straight 50 Foot.......................................... £4.99501-182 Super Alkaline Battery AAA 1.5V - Pack of 4....... £1.85




PLUMB BOBS

STEEL PLUMB BOB an accurately machined steel plumb bobwith corrosion resistant platingand brass screw cap. Weight 130g approx.

CODE TYPE PRICE52172 Steel Plumb Bob 130g.......................................... £4.45

BRASS PLUMB BOB an Expert Quality, precision machined solidbrass plumb bobs with5M approx of nylon line.Weight 100g approx.

CODE TYPE PRICE60698 Brass Plumb Bob 100g......................................... £6.45

CHALK LINE MARKER

CHALK LINE MARKER a self chalking chalk line with a metalbody with angle markings, afold away winding handle,filling hole and self chalkingline (average length 30M)with metal end support. It issupplied complete with asachet of chalk.

CODE TYPE PRICE11528 Chalk Line Marker 30M........................................ £11.9969582 Bottle of Chalk for Chalk Line Marker Blue........... £2.1069583 Bottle of Chalk for Chalk Line Marker Red........... £2.1069584 Bottle of Chalk for Chalk Line Marker Yellow....... £2.10

MINIATURE PLANES

MINI BLOCK PLANE a rosewood and brass mini block plane idealfor the hobbyist orcabinetmakers. The carbonsteel blade is easily removedfor resharpening.Dims:- 75 x 19 x 45mm

CODE TYPE PRICE160-990 Mini Block Plane................................................... £7.99

MINI BULLNOSE PLANE a rosewood and brass mini bull noseplane ideal for the hobbyist or cabinetmakers. The carbon steelblade is easily removed forsharpening. Dims:- 75 x 13 x 40mm.

CODE TYPE PRICE160-938 Mini Bullnose Plane.............................................. £7.99

MINI SCRAPER PLANE a rosewood and brass mini scraper planeideal for the hobbyist or cabinetmakers. The carbon steel bladeis easily removed for sharpening.Dims:- 75 x 20 x 50mm.

CODE TYPE PRICE160-452 Mini Scraper Plane............................................... £7.99

MINIATURE TRIMMING PLANE a miniature trimming plane with apressed steel body and ad-justable blade. The bladewidth is 25mm, body length90mm. Supplied with asingle blade which iseasily sharpened.

CODE TYPE PRICE160-225 Miniature Trimming Plane..................................... £3.99- DRAPER MINIATURE BLOCK PLANE a small block plane idealfor hobby and craft work.It has a pressed steel bodyand steel blade with plasticadjusting knob. The bladecan be removed for honing.Body length - 135mmBlade width - 35mm

CODE TYPE PRICE13875 Draper Mini Block Plane....................................... £6.99

DRAPER BLOCK PLANE a good quality hobby plane. It has apressed steel body with high carbon steel iron. The blade can beremoved forhoning. Bladewidth 42mm, length overall163mm.

CODE TYPE PRICE13874 Draper Block Plane 163mm.................................. £10.99

ANANT BLOCK PLANE a good quality small block plane which isideal for hobby and craft work and for general use. The body isheavy cast iron and the blade is held by a large thumb wheelwhich is loosenedfor adjusting theblade. Length175mm, cutterwidth 40mm.

CODE TYPE PRICE160-110 Anant Block Plane................................................ £9.99

STANLEY MINIATURE BLOCK PLANE 102G a high quality smallblock plane which is ideal for hobby and craft work and for generaluse. The body is heavy cast iron and the blade is held by a largethumb wheel which isloosened for adjustingthe blade. Spare ironsare available.

Length 5½".Cutter width 1-5/8".

CODE TYPE PRICE112102 Stanley Mini Block Plane 102G............................ £18.99012202 Spare Iron For 102G Block Plane........................ £5.05

DRAPER HOBBYIST SMOOTHING PLANE a good qualitysmoothing plane which is ideal for hobby and DIY work. The bodyis pressed steel, the iron is high carbon steel. The blade can beremoved for honing. Blade width 45mm, length overall 235mm.

CODE TYPE PRICE19208 Hobbyist Smoothing Plane................................... £14.99

ANANT BULL NOSE PLANE a light duty plane ideal for cabinetand model makers. The nose of the plane is removable and with 2distance pieces the mouth can be adjusted for fine or coarse work.Removing the nose also converts the plane to a chisel plane.Length overall 140mm.

CODE TYPE PRICE160-116 Anant Bullnose Plane........................................... £26.99

ANANT RABBET PLANE designed for cutting accurate rabettsand fillisters up to 38mm in width. It has 2 cutter positions, for bull-nose work and the rear position for normal rabbeting and fillister-ing. A steel spur is fitted to assist in rabbeting across the grain.The plane has adepth gouge,the adjustablefence may beused on eitherside. The baseand side areground. Cutterwidth 38mm,length 216mm.

CODE TYPE PRICE160-126 Anant Rabbet Plane............................................. £34.99

SPOKESHAVES

ZONA MINIATURE SPOKESHAVE with a solid one piece metalhandle and an adjustable steel blade. Length 3½".

CODE TYPE PRICEZON320 Zona Miniature Spokeshave................................. £6.65

DRAPER SPOKESHAVE an expert quality flat face pattern spoke-shave with a cast iron body. The high carbon steel blade can beremoved for honing. Length 255mm, blade width 55mm.

CODE TYPE PRICE13870 Draper Spokeshave.............................................. £12.99

SAFETY SCRAPER

SAFETY SCRAPER a miniature scraper that uses single edgerazor blades. It can be used as a hull and deck scraper and isideal as a miniature cabinet scraper. The blade is retractable andis locked in position during use or storage. Uses single edge safe-ty razor blades. Supp-lied with 1 blade,spare blades areavailable. Length 4".

CODE TYPE PRICEMM8290 Safety Scraper...................................................... £2.45

SAFETY SCRAPER BLADES single edge safety razor blades foruse with Safety Scraper. The blades have a safety back whichcan be used without a holder fordelicate scraping and slicing.Supplied in packs of 5.

CODE TYPE PRICEMM8291 Safety Blades for Retractable Scraper Pack of 5. £1.85

CABINET SCRAPERS

CROWN CABINET SCRAPERS manufactured from hardenedhigh carbon steel, the set includes:- rectangle 5" x 2½", gooseneck4-3/4" x 3" and convex/concave 2" x 6". Thickness of steel 0.036".The rectangularscraper whichis 5" x 2½" isavailableseparately.

CODE TYPE PRICE376 Crown Cabinet Scrapers Set of 3......................... £7.50375 Crown Rectangle Cabinet Scraper....................... £2.99

BURNISHER

CROWN BURNISHER a high speed steel, round profile burnisherused for sharpening cabinet scrapers. Shaped Rosewood handlewith brass ferrule. Blade length 140mm.

CODE TYPE PRICE377 Crown Burnisher................................................... £8.50


TEL. 01243 842424 - FAX. 01243 842525214

WOOD CARVING TOOLS

MINIATURE WOOD CARVING TOOLS a set of 6 low cost carvingtools ideal for soft woods and lino etc. The set contains a selectionof different shaped Carving Tools, set in 10.5cm wooden handles.

CODE TYPE PRICE160-101 L/C Wood Carving Tools Set of 6......................... £4.45

MINIATURE WOOD CARVING TOOLS a set of 12 low cost carv-ing tools ideal for soft woods and lino etc. The set contains aselection of different shaped Carving Tools, set in 10.5cm woodenhandles.

CODE TYPE PRICE160-102 L/C Wood Carving Tools Set of 12....................... £7.99

MINIATURE WOOD CARVING SET 6 wood carving tools withhardened and tempered steel blades set in smooth ramin handles.Contains:- Skew chisels 4 & 6mm. Square chisel 6mm. V partingtool. Gouges 3 & 6mm. Length 135mm. Supplied with an alumini-um oxidesharpeningstone.

CODE TYPE PRICE31777 6 Piece Mini Wood Carving Tool Set with Stone.. £5.99

WOODCARVING CHISELS a range of woodcarving chisels withwooden handles and deep seated tangs, chrome plated steel fer-rule and fully polished blade. Gouges are designed with a con-cave blade to remove wood material without causing splintering.The depth of the curve or sweep determines the depth of cut.

CODE TYPE PRICE161-001 Woodcarving Chisel Straight Gouge 1/4"............. £4.99161-002 Woodcarving Chisel Straight Gouge 3/8"............. £4.99161-003 Woodcarving Chisel Straight Gouge 5/8"............. £4.99161-004 Woodcarving Chisel Straight Gouge 1"................ £4.99161-005 Woodcarving Straight Chisel 1/4"......................... £4.99161-006 Woodcarving Straight Chisel 1/2"......................... £4.99161-007 Woodcarving Straight V Parting Chisel 1/2"......... £4.99161-008 Woodcarving Straight V Parting Chisel 3/8"......... £4.99161-009 Woodcarving Spoon Carving Gouge 3/4"............. £4.99161-010 Woodcarving Spoon Carving Chisel 3/4"............. £4.99161-011 Woodcarving Curved Carving Gouge 1/2"........... £4.99161-012 Woodcarving Skew Carving Chisel 1/2"............... £4.99

CROWN WOODCARVING SET a 6 piece wood carving tool setwith hardened and tempered carbon steel blades set in stainedbeech handles. Contains:- 5/16" square chisel, 5/16" bent squarechisel, 5/16" skew chisel, 3/16" straight gouge, 5/16" bent gouge,3/16" bent ‘V’ tool. Length 180mm. Supplied in a presentationbox. Made in Sheffield.

CODE TYPE PRICE220 Crown 6 Piece Wood Carving Set........................ £34.50

6 PIECE PALM CHISEL SET a set of 6 chisels with drop forgedand heat treated steel blades. Fitted with palm shaped woodenhandles. Ideal for precision carving and woodworking , lino carv-ing etc.

CODE TYPE PRICE160-150 6 Piece Palm Chisel Set....................................... £6.99

WOODCARVING TOOLS for detail wood carving and for lino andwood block cutting. Each has a wood handle which fits the palm.The set contains:- 5/16" bent chisel, 5/16" bent shallow gouge, 3/8"bent skew chisel, 3/8" straight chisel, 1/8" bent V gouge and 1/8"deep gouge. Length 140mm.

CODE TYPE PRICE160-100 Woodcarving Tool Set of 6................................... £18.99

WOOD CHISELS

CORNER CHISEL a high quality tungsten steel corner chisel heldin a spring loaded steel bodied jig. Ideal for knocking out roundedcorners from a routed hinge recess. Hit once with a hammer ormallet & pare out the waste for a perfect cut every time.

CODE TYPE PRICE160-403 Corner Chisel........................................................ £5.20



IF THERE ARE OTHER PRODUCTS THATYOU WOULD LIKE US TO STOCK, PLEASE

FEEL FREE TO LET US KNOW.

CROWN CORNER CLEANING CHISELS a set of 2 1/4" (6mm)dog leg chisels for cleaning corners, grooves and mouldings. Twoare supplied, bentleft and right withsmall rosewoodhandles. Bladelength 3".

CODE TYPE PRICEC175RC Crown Corner Cleaning Chisels ......................... £12.99

BEVEL EDGE WOOD CHISELS expert quality manufactured fromchrome vanadium steel hardened, tempered and finely ground,clear lacquer coated for corrosion resistance. Fitted with impactresistant polypropylene handles designed for comfort and control.Ideal for general carpentry and cabinet making.

CODE TYPE PRICE34966 Bevel Edge Wood Chisel 6mm............................. £4.9934970 Bevel Edge Wood Chisel 12mm.......................... £5.85

4 PIECE WOOD CHISEL SET a set of 4 bevel edge wood chiselswith a hi-vis shaped handles. The set includes the followingwidths:- 1/2", 3/4", 1" and 1-1/4". Length 10".

CODE TYPE PRICE160-139 4 Piece Bevel Edge Wood Chisel Set.................. £9.50

MALLETS

WOODEN MALLET ideal for most woodworking chisels, solidhead with angled striking faces. Approx size: 4-1/2" (113mm).

CODE TYPE PRICE050-204 Wooden Mallet 4-1/2"........................................... £4.99

3" BEECHWOOD JOINER’S MALLET a well finished miniaturebeechwood mallet with a solid head and angled striking faces. Ithas a tapered morticed shaft. Length 9½".

CODE TYPE PRICEWWBM03 Beechwood Mallet 3"............................................ £6.99

CROWN WOODCARVERS MALLET a high quality carver’s malletmade from solid fully seasoned beech with an ash handle. Themallet is wellbalanced andcomfortable tohold. Weight18oz.

CODE TYPE PRICEC104 Crown Woodcarvers Mallet................................. £22.99

TACK LIFTER

TACK LIFTER with a bright polished steel claw blade with curvedleverage end. Fitted with a plastic handle. Length 195mm.

CODE TYPE PRICE64804 Tack Lifter 195mm................................................ £3.75

NAIL PUNCHES

DRAPER CUPPED NAIL PUNCH SET 4 PIECE a 4 piece cuppednail punch set with square section striking heads, knurled bodiesand polished ends. Carbon steel hardened and tempered.Contents: 1.5, 2.5, 3.0 and 5.0mm.

CODE TYPE PRICE35480 Draper Cupped Nail Punch Set 4 Piece............... £7.65

SELF-LOCATING NAIL PUNCH designed to prevent the punchslipping accidentally to the side of the pin head. The punch is with-drawn into the sleeve, the sleeve locates over the pin head, thepunch is then struck with a hammer. Maximum nail size 2.5mm.

CODE TYPE PRICE160-034 Self-Locating Nail Punch...................................... £7.50

RASPS

NEEDLE RASP SET a set of 6 needle rasps containing popularshapes of round, half round, flat etc. Ideal for carving and shapingwoods and other soft materials. Supplied in a wallet. Length140mm.

CODE TYPE PRICEWNR010 6 P/C Needle Rasp Set........................................ £7.99


TEL. 01243 842424 - FAX. 01243 842525216

IF THERE ARE OTHER PRODUCTS THATYOU WOULD LIKE US TO STOCK, PLEASE

FEEL FREE TO LET US KNOW.

LARGE NEEDLE RASP SET a set of 5 large needle rasps con-taining popular shapes of round, half round, flat etc. Ideal for carv-ing and shaping woods and other soft materials. Length 180mm.

CODE TYPE PRICE160-180 5 P/C Large Needle Rasp Set 180mm................. £4.99

HALF ROUND WOOD RASPS a range of high quality half roundwood rasps in a range lengths and cuts. Cuts both faces andedges. Manufactured by The Tomé File Company.

CODE TYPE PRICE160-010 Wood Rasp Half Round Bastard Cut 6"............... £4.99160-012 Wood Rasp Half Round Bastard Cut 8"............... £5.99160-014 Wood Rasp Half Round Second Cut 6"............... £4.99160-016 Wood Rasp Half Round Second Cut 8"............... £5.99160-018 Wood Rasp Half Round Smooth Cut 6"............... £5.99160-020 Wood Rasp Half Round Smooth Cut 8"............... £6.99

ROUND WOOD RASPS high quality round wood rasps. Cut onwhole face. Manufactured by The Tomé File Company.

CODE TYPE PRICE160-022 Wood Rasp Round Bastard Cut 6"....................... £2.99160-024 Wood Rasp Round Bastard Cut 8"....................... £3.79

FLAT WOOD RASPS high quality flat wood rasps in a rangelengths and cuts. Cut on all faces and edges, parallel in thickness,width tapers slightly. Manufactured by The Tomé File Company.

CODE TYPE PRICE160-026 Wood Rasp Flat Bastard Cut 6"........................... £2.99160-028 Wood Rasp Flat Bastard Cut 8"........................... £3.99

HALF ROUND CABINET RASPS a range of high quality halfround cabinet rasps which have a thinner profile than a half roundwood rasp. in a range lengths and cuts. Cuts both faces andedges. Manufactured by The Tomé File Company.

CODE TYPE PRICE160-030 Cabinet Rasp Half Round Second Cut 6"............. £5.99160-032 Cabinet Rasp Half Round Second Cut 8"............. £7.35160-036 Cabinet Rasp Half Round Smooth Cut 6"............ £6.99160-038 Cabinet Rasp Half Round Smooth Cut 8"............ £7.99

MULTIRASP SHAVER a compact multirasp plane with hardenedsteel blade. The sharp blade removes material quickly withoutclogging. It is used with a pulling action and is ideal for working inconfined areas. Suitable for hard and soft woods, plastics, per-spex, plaster,ceramics and softmetals. Suppliedwith a spare blade.Further spareblades are available.

CODE TYPE PRICE13855 Multirasp Shaver................................................... £4.9927074 Spare Blade for Multirasp Shaver 13855.............. £1.60

MULTIRASP BLOCK PLANE a compact multirasp plane with adicast body and hardened steel blade. The sharp blade removesmaterial quickly without clogging. It can be used single handedand the blade can be reversed for working in confined areas.Suitable for hard and soft woods, plastics, perspex, plaster, ceram-ics and soft metals. Spare blades are available.

CODE TYPE PRICE13849 Multirasp Block Plane .......................................... £7.7513853 Flat Multirasp Spare Blades................................. £3.45

MULTIRASP FILE a multirasp file with a diecast body and hard-ened steel blade. The sharp blade removes material quickly with-out clogging. The blade can be reversed if required. Suitable forhard and soft woods, plastics, perspex, plaster, ceramics and softmetals. Spare blades are available. Blade length 255mm. Spareblades are available.

CODE TYPE PRICE13846 Multirasp Plane File 13846................................... £12.9913851 Multirasp Spare Blade Flat................................... £3.6513852 Multirasp Spare Blade Half Round....................... £4.15

MULTIRASP PLANE FILE a multirasp plane with a diecast bodyand hardened steel blade. The sharp blade removes materialquickly without clogging. The handle of the plane can be locked intwo positions allowing it to be used as a plane or a file. The bladecan be reversed if required. Suitable for hard and soft woods, plas-tics, perspex, plaster, ceramics and soft metals. Blade length255mm. Spare blades are available.

CODE TYPE PRICE13848 Multirasp Plane File 13848................................... £11.5513851 Multirasp Spare Blade Flat................................... £3.6513852 Multirasp Spare Blade Half Round....................... £4.15

MULTIRASP PLANE a multirasp plane with a diecast body andhardened steel blade. The sharp blade removes material quicklywithout clogging. The shaped handle allows it to be used as aplane. The blade can be reversed if required. Suitable for hardand soft woods, plastics, perspex, plaster, ceramics and soft met-als. Spare blades are available. Blade length 255mm.

CODE TYPE PRICE13847 Multirasp Plane 13847.......................................... £12.9913851 Multirasp Spare Blade Flat................................... £3.6513852 Multirasp Spare Blade Half Round....................... £4.15



SANDING BLOCKS AND ABRASIVE PAPER

MINIATURE SANDING BLOCK a miniature 2 piece hardwoodsanding block which is clamped together with a brass screw.Sanding sheets for the block are simply cut from a larger sheet,the ends are turned over andheld between the 2 parts ofthe block. Sanding face45mm x 25mm.

CODE TYPE PRICESB07 Miniature Sanding Block....................................... £3.99

CORK SANDING BLOCK a traditional cork sanding block with aflat base and bevellededges. Manufactured fromcompressed cork, can beused for wet or dry sanding.Dims:- 115 x 65 x 38mm.

CODE TYPE PRICE66082 Cork Sanding Block.............................................. £1.65

RUBBER SANDING BLOCK a black rubber sanding block withmetal grip pins in each ends.Used with wet and dry paper.Sanding face 125 x 65mm.

CODE TYPE PRICE18936 Rubber Sanding Block.......................................... £3.99

GLASSPAPER a range of glass paper sheets graded for finishingwood. The sheets are 280 x 230mm, the coarse grades are forrapid material removal andideal for rough surfaces,medium and fine for finishing.Supplied individually and inpacks of 25 sheets. Idealfor use with sanding blocks.

CODE TYPE PRICEGP00 Glass Paper Very Fine 240 Grit x 1...................... £0.29GP0 Glass Paper Fine 220 Grit x 1.............................. £0.29GP1 Glass Paper Fine 150 Grit x 1.............................. £0.29GP112 Glass Paper Medium 120 Grit x 1........................ £0.29GPF2 Glass Paper Medium100 Grit x 1......................... £0.29GPM2 Glass Paper Medium 70 Grit x 1.......................... £0.39GPS2 Glass Paper Coarse 40 Grit x 1............................ £0.39GP212 Glass Paper Coarse 36 Grit x 1............................ £0.39GP00P Glass Paper Very Fine 240 Grit 25 Pack.............. £3.99GP0P Glass Paper Fine 220 Grit 25 Pack...................... £4.25GP1P Glass Paper Fine 150 Grit 25 Pack...................... £4.25GP112P Glass Paper Medium 120 Grit 25 Pack................ £4.25GPF2P Glass Paper Medium 100 Grit 25 Pack................ £4.25GPM2P Glass Paper Medium 70 Grit 25 Pack.................. £5.25GPS2P Glass Paper Coarse 40 Grit 25 Pack................... £5.25GP212P Glass Paper Coarse 36 Grit 25 Pack................... £5.55

DRAPER ASSORTED GLASS PAPER 5 PACK a general pur-pose abrasive sheet for use in woodworking applications. Suppliedin five sheets packs. Contents: 2 x F2; 2 x M2 and 1 x S2.

CODE TYPE PRICE13099 Draper Assorted Glass Paper 5 Pack................... £2.49

FLEXIBLE SANDING SPONGES a dense foam sponge which iscoated with two different grades of abrasive grit. Ideal for sandingangles, contoured or flatsurfaces. Overall size:-102 x 70 x 23mm.

CODE TYPE PRICE10106 Flexible Sanding Sponges Fine/Medium.............. £1.5010109 Flexible Sanding Sponges Medium/Coarse......... £1.50

CONTOUR SANDER ideal for sanding models and miniature furni-ture. The long narrow handle helps to reach inaccessible places.The difference of this tool to other stick sanders is the 2 contouredsanding tips which can be set at various angles. The tips have dif-ferent radii and a flat, this allows sanding various contours withease. A ring slides over and down the handle, this puts tension onthe sanding belt which in turn holds the tip in the desired position.Length 15cm. Supplied with 2 cloth backed sanding belts, furtherbelts are available in packs of 4.

CODE TYPE PRICEAB7393 Contour Sander with 2 Belts................................. £12.997394/18 Contour Sander Spare Belts x4 180 Grit.............. £2.997394/32 Contour Sander Spare Belts x4 320 Grit.............. £2.99

WATERPROOF ABRASIVE PAPERS

FLEXI-GRIT a revolutionary sanding film on polyester. It is flexi-ble, tough and can be reused many times. When in use it will notcrack, peel, clog or break down when wet. Works effectively heldby hand or on a sanding block. Available in 2 assorted packs andpacks of 5 sheets of the same grit.Fine assortment contains:-Silicon Carbide 320, 150 grit,Aluminium Oxide 600, 400 grit,Garnet 280 grit.Micro Fine assortment contains:-Cerium Oxide 1.5 micron,Chromium Oxide .5 micron, Aluminium Oxide 23 micron, Silicon Carbide 8 & 23 micron.

CODE TYPE PRICEAB4300 Flexi-Grit 5 Assorted Fine 190 x 125mm.............. £6.99KS4031 Flexi-Grit Garnet 320 Grit Fine 115 x 100mm...... £2.99


TEL. 01243 842424 - FAX. 01243 842525218

WATERPROOF ABRASIVE SHEETS a range of waterproofpapers which are usually used wet to prevent clogging when sand-ing painted surfaces. Ideal for general applications such as carbody work, smoothing fillers etc.Coarse grades for fast cutting, thefiner grades for final finishing.Sheet size 280 x 230mm. Soldindividually.

CODE TYPE PRICEWDP80 Waterproof Paper Coarse 80 Grit x1 Sheet.......... £0.90WDP120 Waterproof Paper Medium 120 Grit x1 Sheet...... £0.69WDP240 Waterproof Paper Medium 240 Grit x1 Sheet..... £0.60WDP320 Waterproof Paper Fine 320 Grit x1 Sheet........... £0.60WDP400 Waterproof Paper Very Fine 400 Grit x1 Sheet.... £0.60061-600 Waterproof Paper Very Fine 600 Grit x1 Sheet.... £0.60061-800 Waterproof Paper Very Fine 800 Grit x1 Sheet.... £0.60061-100 Waterproof Paper Very Fine 1000 Grit x1 Sheet.. £0.60061-120 Waterproof Paper Very Fine 1200 Grit x1 Sheet.. £0.60

WET AND DRY SHEETS a range of high quality self-lubricatingsilicon carbide sheets with waterprooflatex backing. Ideal for use on metal,wet or dry. Very fine grades areideal for rubbing down betweenpainting. Sheet size 230 x 280mm,supplied in packs of 10 sheets.

CODE TYPE PRICE160-260 Wet & Dry Sheets 10 Pack 120 Grit..................... £3.39160-262 Wet & Dry Sheets 10 Pack 180 Grit..................... £3.39160-264 Wet & Dry Sheets 10 Pack 240 Grit..................... £3.39160-266 Wet & Dry Sheets 10 Pack 320 Grit..................... £3.39160-268 Wet & Dry Sheets 10 Pack 400 Grit..................... £3.39160-270 Wet & Dry Sheets 10 Pack 600 Grit..................... £3.39160-272 Wet & Dry Sheets 10 Pack 1200 Grit................... £3.39

PERMA-GRIT SANDING TOOLS

PERMA-GRIT FLEXIBLE SANDING STRIPS longlife sandingsheets which has the grit bonded to a flexible backing. Available in2 sizes, fineand coarse.

CODE TYPE PRICEFXT-106 Perma-Grit Sanding Strip 51 x 140mm Fine......... £6.65FXT-107 Perma-Grit Sanding Strip 51 x 140mm Coarse.... £6.65FXT-103 Perma-Grit Sanding Strip 51 x 280mm Fine......... £8.69FXT-104 Perma-Grit Sanding Strip 51 x 280mm Coarse.... £8.69

PERMA-GRIT FLAT FILE a flat sanding/filing tool with the grit cov-ering over the full length of the tool, ideal for cleaning slots and forworking where a sanding block would be too large. Available inFine or Coarse. Dims 230 x 38mm.

CODE TYPE PRICEF101 Perma-Grit Flat Fine............................................. £7.65F102 Perma-Grit Flat Coarse........................................ £7.65

PERMA-GRIT SANDING BLOCKS longlife sanding blocks thatare coarse one side and fine on the opposite. The grit is bondedto an aluminiumextrusion and coversthe whole surface.4 sizes available.

CODE TYPE PRICESB140 Perma-Grit Sanding Block 140mm x 51mm......... £15.35SB280 Perma-Grit Sanding Block 280mm x 51mm......... £24.50SB560 Perma-Grit Sanding Block 560mm x 51mm......... £35.75SB840 Perma-Grit Sanding Block 840mm x 51mm......... £49.99

PERMA-GRIT WEDGE SANDING BLOCK a longlife sandingblocks that has coarse one side and fine on the opposite. The gritis bonded to an aluminium extrusion and covers the whole surface.The wedge shapeallows sanding inconfined edges etc.Length 140mm x 51mm.

CODE TYPE PRICEWB140 P/Grit Wedge Sanding Block F/C 140 x 51mm.... £15.35

PERMA-GRIT CONTOUR SANDING BLOCKS longlife sandingblocks that have a concave and a convex surface. The grit isbonded to an aluminium extrusion and covers the whole surface.Available with Fineand Coarse grits.Length 140mmx 51mm.

CODE TYPE PRICECB140F P/Grit Contour Sanding Block Fine 140mm.......... £15.35CB140C P/Grit Contour Sanding Block Coarse 140mm..... £15.35



SQUIRES GIFT VOUCHERSSupplied with a quality card

redeemable at any of our exhibitionstands, by mail order or at our shop.

GV5 - Gift Voucher Value £5.00GV10 - Gift Voucher Value £10.00GV20 - Gift Voucher Value £20.00

STEEL WOOL

STEEL WOOL a range of superior industrial grade oil free steelwool available in 6 grades. All grades are supplied in a 454g roll. Grade 0000 Super Fine, used for fine cabinet work, dulling of var-nish and polishing of metals.Grade 000 Very Fine, used before final coat of paint or varnish todull surface. For fine finishing of wood, high lustre polishing ofchrome and brass.Grade 0 Fine, for final surface preparation, keying surfaces priorto painting, for cleaning/polishing metals, glass, tiling, ceramics.Grade 1 - 2 Medium, for general purpose applications includingremoval of grease, light rust and surface stains. Can be used withliquid paint stripper to remove paint and varnish. Also used forcleaning copper, lead and brass.Grade 3 Coarse, for preparation of external woodwork, rusted sur-faces, heavily greased and dirty metalwork. Removal of paint andvarnish.Grade 4 Very Coarse, for removing heavily crusted rust, enginecleaning and autobody preparation.

CODE TYPE PRICESWG40 Steel Wool Super Fine 0000 454g........................ £12.99SWG30 Steel Wool Very Fine 000 454g............................ £10.99SWG0 Steel Wool Fine 0 454g........................................ £7.99SWG12 Steel Wool Medium 1 - 2 454g............................. £7.99SW3 Steel Wool Coarse 3 454g.................................... £6.99SW4 Steel Wool Very Coarse 4 454g........................... £6.99

SHARPENING STONES

5 PIECE SHARPENING STONE SET a low cost set of 5 differentshaped sharpening stones. The set includes a 150 x 50 x 25mmcombination stone with fine/medium surfaces. 1 each of triangle,flat and half round stones 150 x 10mm and a 75 x 25mm flat stone.

CODE TYPE PRICE160-129 5 Piece Sharpening Stone Set............................. £2.99

COMBINATION OILSTONE AND BOX a silicon carbide oilstonewith fine and medium sharpening surfaces. Dimensions:- 8" x 2" x1". The oilstone boxis manufactured fromtough oil resistantplastic. It has 2countersunk holesfor fixing to a bench.

CODE TYPE PRICEOS0010 Combination Oilstone and Box............................. £3.99

BEECHWOOD OIL STONE BOX

BEECHWOOD OILSTONE BOX a 2 part beechwood box suitablefor an 8" x 2" x 1" oilstone. The box is made so that the lid andbottom are of equalheight, thus theoilstone can beused with theoilstone in thebottom half ofthe box.

CODE TYPE PRICEOSB030 Beechwood Oilstone Box..................................... £8.55

HONING GUIDE

HONING GUIDE an accurately formed diecast honing guide with asmooth roller which willaccept chisels and planeirons sized 3mm (1/8")up to 67mm (2-5/8"),setting them at thecorrect angle for honing.

CODE TYPE PRICEOSHG30 Honing Guide........................................................ £10.99

GRINDING ANGLE CHECKER

GRINDING ANGLE CHECKER a reference for grinding angles.Made of solid brass suitable forchecking grinding and honingangles. Notched with 15, 20,25, 30, 35, 45, 50 and 70° angles.

CODE TYPE PRICEBAC010 Angle Checker...................................................... £2.79

DIAMOND SHARPENERS

DIAMOND SHARPENING PEN puts a razor sharp edge on diffi-cult to sharpen tools. Pocket size for convenience with an ultralong life diamond sharpening blade.

CODE TYPE PRICE160-537 Diamond Sharpening Pen.................................... £5.99

KEYRING DIAMOND SHARPENING CARD a double-sided, 320grit diamond sharpening cardfor sharpening pocket knivesand other small tools. Includeskeyring attachment and safetycover. L x W: 63 x 19mm.

CODE TYPE PRICE160-242 Keyring Diamond Sharpening Card...................... £3.10


TEL. 01243 842424 - FAX. 01243 842525220

DIAMOND SHARPENING CARD a pocket sized, 320 grit diamondsharpening card for use onpocket knives and small handtools. Includes a handy plasticpouch. L x W: 80 x 50mm.

CODE TYPE PRICE160-232 Diamond Sharpening Card 320 Grit..................... £5.99

POCKET DIAMOND SHARPENING STONE a compact 320 gritdiamond sharpening stone for sharpening pocket knives, chisels,router cutters and small handtools. V-shaped groove forsharpening points on scribersand marking gauges. Includesstorage pouch with belt loop.W x L x D: 25 x 75 x 6mm.

CODE TYPE PRICE160-234 Pocket Diamond Sharpening Stone..................... £6.99

FOLDING DIAMOND SHARPENER double-sided diamond sharp-ening stones for sharpeningand honing chisels, routercutters, plane blades andmost hand tools.L x W: 100 x 20mm.

CODE TYPE PRICE160-238 Folding Diamond Sharpener 325/600 Grit............ £7.99160-240 Folding Diamond Sharpener 600/1200 Grit.......... £7.99

DOUBLE SIDED DIAMOND FILE with a perforated surface for thesharpening of larger tools and standard surface for smaller or finerwork. 320 grit. For chisels, router cutters, plane blades and mosthand tools. Use dry or with a little water for lubrication. Dry thor-oughly after use.L x W: 150 x 50mm.

CODE TYPE PRICE160-236 Double Sided Diamond File.................................. £9.89

MINIATURE DIAMOND SHARPENERS a set of 3 miniature dia-mond stones for sharpening. The set contains one each of 180,260 and 360 grit. Ideal for sharpening small tools including knives,chisels, router cutters etc. Whensharpening small pointed itemscare must be taken to avoiddamage to the sharpener.For best results use a littlewater as a lubricant. Notethe stone MUST be dried afteruse. Dimensions:- 25 x 75mm.

CODE TYPE PRICEDWS752 Mini Diamond Sharpener Set of 3 - 25 x75mm.... £5.50

DIAMOND SHARPENERS a set of 3 larger diamond stones forsharpening. The set contains one each of 180, 260 and 360 grit.The larger surface area is ideal for larger tools and chisels using ahoning guide. Whensharpening small pointeditems care must be takento avoid damage to thesharpener. For bestresults use a little wateras a lubricant. Note thestone MUST be dried afteruse. Dimensions:-50 x 150mm.

CODE TYPE PRICEDWS599 Diamond Sharpener Set of 3 - 50 x 150mm......... £8.99

4 SIDE DIAMOND SHARPENING BLOCK features 4 differentgrades: 200 grit(extra coarse),300 grit (coarse),400 grit (medium)and 600 grit (fine).Sturdy plastic basewith non-slip feet.Ideal for most handand garden tools.L x W: 160 x 55mm.

CODE TYPE PRICE160-230 4 Side Diamond Sharpening Block 200-600 Grit.. £12.70

HAND DRILL

STANLEY HAND DRILL a high quality precision made single pin-ion hand drill which is ideal for hand drilling in soft materials. It hasa self centring 3 jaw keyless chuck, diecast aluminium gears and amoulded plastic handle. Length 270mm, chuck capacity 5/16".

CODE TYPE PRICEHD3105 Stanley Hand Drill................................................. £17.50

PYROGRAPHY TOOLS

WOOD BURNING PEN AND TIPS a 30 watt iron supplied with 6shaped tips for burning patterns on wood, cork and leather etc.The pen, which looks very much like a small soldering iron, has atriangular section handle which makes it comfortable to grip andtherefore easy to control. The handle flares out to form a guard tokeep the fingers away from the hot bits of the iron. There are sixinterchangeable bits supplied with the pen which allow a range ofgraphic effects to be achieved. The simple design makes this anideal beginners tool. Supplied with a small bench rest.

CODE TYPE PRICE160-203 Wood Burning Pen and Tips................................. £23.99




WOOD BURNING KIT a 26 watt iron supplied with 5 tips for burn-ing patterns on wood, cork and leather etc. The simple designmakes this an ideal beginners tool. The pen, which looks verymuch like a small soldering iron, has a round section handle with arubber grip for ease of control. The handle flares out to form aguard to keep the fingers away from the hot bits of the iron. Thekit includes 5 bits with a small storage tray, a screwdriver for bitchanging, a stand, a brass cleaning brush, flat tweezers, someabrasive paper and a designs sheet. All supplied in a wooden box.

CODE TYPE PRICE160-202 Wood Burning Kit.................................................. £49.99

WOODBURNING STATIONS

WOODBURNING STATION a 20 watt variable temperature whichis ideal for decorative wood and leather burning, it is also ideal forfabric distressing etc. It is supplied with a range 13 different tips,and a hot knife. It features a stepless temperature control of range50 - 500°C. A small bench rest is included.

CODE TYPE PRICE160-201 Wood Burning Station........................................... £79.99

WOODBURNING STATION a 30 watt variable temperature whichis ideal for decorative wood and leather burning, it is also ideal forfabric distressing etc. It is supplied with 3 different tips, a fine tipfor intricate designs, a medium and a flat tip is included.Temperature control range 450 - 750°C.

CODE TYPE PRICE160-900 Wood Burning Station........................................... £89.99160-001 Wide Tip for Wood Burning Station...................... £2.99160-005 Medium Tip for Wood Burning Station.................. £2.99160-007 Fine Tip for Wood Burning Station....................... £2.99

WELLER PYROGRAPHY TOOL

WELLER WOODBURNING IRON a light 25 watt iron speciallydesigned for wood and cork burning, leather tooling and candlesculpting. Supplied with a 0.8mm pointed bit and a 4mm blade bitand also an iron rest.

CODE TYPE PRICE160-025 Weller Woodburning Iron Hobbykit 1.................... £24.99160-899 Spare Tips for Weller Hobbykit 1 MT5/MT9......... £4.99

NON-SLIP GRIP MATS

NON-SLIP GRIP MATS a multi-purpose non-slip mat that will gripand protect almost any surface. Grip Mat will not shift or moveonce placed. Manufactured from a flame-retardant, mould, mildewand mothproof material with a 10 year non-slip guarantee. Theuses for Grip Mat are only limited by ones imagination. Easy toclean, just rinse with water and lay flat to dry. Supplied in rolls orpad which are easily cut to size with scissors.

CODE TYPE PRICE54672 Non-Slip Grip Mat Roll 300 x 1820mm................. £13.9954673 Non-Slip Grip Mat Roll 450 x 1820mm................. £19.9954674 Non-Slip Grip Mat Pad 610 x 1220mm................. £18.9954675 Non-Slip Grip Mat Pad 910 x 1220mm................. £24.99


TEL. 01243 842424 - FAX. 01243 842525222

COMING SOON!NEW IMPROVED

ANTEX PIRANHA PROFESSIONALPYROGRAPHY STATION £129.99

DELIVERY EXPECTEDIN TIME FOR CHRISTMAS

SQUIRES GIFT VOUCHERSSupplied with a quality card

redeemable at any of our exhibitionstands, by mail order or at our shop.

GV5 - Gift Voucher Value £5.00GV10 - Gift Voucher Value £10.00GV20 - Gift Voucher Value £20.00

mini woodworking tools - chisels - sharpening · pdf filemini try square david use photo...

Documents