1 of 9

Miwag Greentech UG Technological Innovations in Environmental Service

2 of 9

► EQUIPMENT LIST

Description & Type Quantity Reference picture

GROUP 1: PELLETING SYSTEM

Z01 Feeding Bin, 2m³ 1

※ Made of carbon steel material ※ Capacity: 2 m³ Z02 Flat and Inclined Belt Conveyor, LYBC800 1

※ Seamless steel pipe for main shaft, solid shaft cylinder 3 mm steel for convey shaft. ※ Blade made by 4 mm steel UCF shaft end. ※ Equipped with a stock-sealing device added at the discharger end. ※ Up to 5 m. Z03 Strong magnet Iron Remover, 600×400×150 1

※ Remove the impurity from the raw materials during grinding process Z04 Bucket Elevator, TDTG60/30 1

※ With elevator floor incl. belt pulley, inlet, belt, buckets shafts, elevator head. ※ Continuous and vertical elevating of materials in shape of powder, granule and small piece. ※ Equipment with explosion relief port, prevent dust explosion, safe and reliable. ※ Compact structure, beautiful appearance, high output and high conveying capacity. ※ Up to 12 m.

3 of 9

Description & Type Quantity Reference picture Z05 Double Scraper Conveyor, TGSS40 1 ※Length: 16 m Anti-corrosion surface treatment: Painted Casing cover thickness: 2 mm Casing Sidewall thickness: 3 mm Casing bottom thickness: 5 mm manganese steel wear-resistant plate Speed of drag scraper: 0.3-0.6 m/s ※ Conveyor head Wear resistant sprocket, drag chain tension device; High strength conveying chain, high polymer wear-resistant riding wheel High polymer drags, ensure smooth running and Low starting or operation current Gear speed reducer and chain driving system Out hanging bearing housing and sealing shaft Blockage limit switch ※ Tail station Self-cleaning steel construction;

Z06 Pelleting Bin, 2 m³ 6

※ Made of carbon steel material ※ Capacity: 2 m³

Z07-1 Pellet Machine Feeder 6

Z07-2 Ring Die Pellet Mill, MZLH420 6

※ Gearbox with pinion shaft, main gear, main shaft, quill shaft, gearbox body, manual lubrication system and overload protection system. ※ Coupling assembly with hub-taper lock bores, bushing-taper locks, S-shaped grid cover etc. ※ One set of roller assembly, two-roller system. ※ Ring die special design for low bulk density pelleting. ※ Door made with one knife assembly. ※ Feed chute. External discharging can be carried out by pulling out the external discharging lever arm of feed chute to prevent feed from entering the pellet chamber for the convenience of trial run and breakdown removal. ※ Capacity: 1-1.5 TPH Per unit. ※ With Siemens Motor. ※ With NSK/SKF Bearing ※ With inverter feeding

4 of 9

Description & Type Quantity Reference picture

Z08 Fan, 6-30No4A 2

※ It is commonly used in forging smelting furnace and high-pressure forced ventilation, and transporting materials, transportation air and gas with noncorrosive, non-hypergolic, do not contain sticky materials

Z09 Cyclone, Φ800 2

※ With top part including inlet sleeve for dust-laden air and outlet flange for clean air, bottom part with cleaning flap, and lock fitting piece. ※ Made of 3 mm thickness carbon steel.

Z10 Bag Pulser Filter, TBLJ4 2

※ Compact structure and flexible layout ※ Less occupied space, bigger filtering apace ※ The fan is combined with pulse filter to simplify process, shorten aspiration net and reduce resistance. ※ The direct way solenoid value is used and needs less air volume, low pressure. ※ It can be used for dust removing for hammer mill, dumping hopper, bagging, pneumatic conveying or others.

Z11 Flat and Inclined Belt Conveyor, LYBC600 1

※ Seamless steel pipe for main shaft, solid shaft cylinder 3 mm steel for convey shaft. ※ Blade made by 4 mm steel UCF shaft end. ※ Equipped with a stock-sealing device added at the discharger end. ※ Up to 16 m.

5 of 9

Description & Type Quantity Reference picture Z11 Skirt Belt Conveyor, LYBC600 1

※ Seamless steel pipe for main shaft, solid shaft cylinder 3 mm steel for convey shaft. ※ Blade made by 4mm steel UCF shaft end. ※ Equipped with a stock-sealing device added at the discharger end. ※ Up to 10 m.

GROUP 2: COOLING AND BAGGING SYSTEM

L02 Fan, 4-72N06C

※ It is commonly used in forging smelting furnace and high-pressure forced ventilation, and transporting materials, transportation air and gas with noncorrosive, non-hypergolic, do not contain sticky materials.

L03 Cyclone, Φ1200

※ With top part including inlet sleeve for dust-laden air and outlet flange for clean air, bottom part with cleaning flap, and lock fitting piece. ※ Made of 3 mm thickness carbon steel.

L01 Air closed Feeder, For Cooler SKLB4 1

Cooler, SKLB4 1

※ Using counter flow cooling principle, to avoid the pellets surface shock cooling and cracking. ※ Pendulum discharge mechanism, Discharge the material is more uniform, smooth, speed is adjustable, after cooling the material can keep good shape. ※ Unique screed body, more thoroughly and uniform distribution of the material. ※ The air intake area is larger, high efficiency on cold air, the cooling effect is significant. ※ Applicable to cooling various materials massive, flakes, pellets, expanded materials, extruder materials.

6 of 9

Description & Type Quantity Reference picture L04 Airlock, TGF9 1

※ With case rotor. ※ It is mainly used in powder project, storage silo, pneumatic transportation and de-dusting system of feeding, discharging.

L05 Bag Pulser Filter, TBLJ16 1

※ Compact structure and flexible layout ※ Less occupied space, bigger filtering apace ※ The fan is combined with pulse filter to simplify process, shorten aspiration net and reduce resistance. ※ The direct way solenoid value is used and needs less air volume, low pressure. ※ It can be used for dust removing for hammer mill, dumping hopper, bagging, pneumatic conveying or others.

L06 Vibrating screener, SFJZ125X1C 1

※ Adopt vibration motor as vibration source, little vibration, low noise, smooth running. ※ Pressure sieve mechanism is easy and convenient, can quickly change the screen. ※ Large capacity, high screening efficiency. ※ No need oil lubrication, to avoid the oil leakage. ※ Vibration force size, vibration direction and sieve body angle can be adjusted according to need, convenient operation and maintenance.

L07 Screw conveyor, TLSS20-6M 1

※ Seamless steel pipe for main shaft, solid shaft cylinder 3mm steel for convey shaft; ※ Blade made by 4 mm steel UCF shaft end; ※ Equipped with a stock-sealing device added at the discharger end. ※ With inverter ※ Length: 6 m

7 of 9

Description & Type Quantity Reference picture L08 Skirt Belt Conveyor, LYBC600 1

※ Seamless steel pipe for main shaft, solid shaft cylinder 3 mm steel for convey shaft. ※ Blade made by 4 mm steel UCF shaft end. ※ Equipped with a stock-sealing device added at the discharger end. ※ Up to 10 m.

Finished Product Bin

※ Made with carbon steel material ※ Capacity: 3m³

Ton Bagging Machine, SDBLY-1000C

Mettler-Toledo sensors

※ Imported smart-control instrument, weighing sensor and pneumatic component are applied. ※Gravity type charging framework can improve output greatly. ※Automatic bag removing system is applied to reduce labor force. ※Weighing and packing are separated to ensure stability and reliability of sensor, which improves packing speed. ※Synchronized lifting system ensures safety and reliability of material receiving and packing, which improves working life of tray. ※AC stable-voltage power is equipped to make stable and reliable packing. ※Stainless steel is applied to components in contact with materials to make longer working life. ※Weighing range (kg): 500-1000 ※Weighing speed (bag/h): 30-50 ※Accuracy class: X (0.2) ※Electric weighing, auto bag-releasing, and dust removal come into one; ※Adopt sensor meter, high sensitivity, high anti- interference; ※With the technology of Auto-compensation, auto-zero, net weight measurement, high and accurate measurement, stable and reliable performance, long service life, high performance-cost radio; ※A combination of electric weighing, auto bag-releasing and dust removal.

8 of 9

Description & Type Quantity Reference picture GROUP 3: ELECTRIC CONTROL SYSTEM Control Center including PVC analogue panel buttons from Japan; element below 30 kW is imported from Schneider. E01

.

E02 Armored cable (below15 kW), wire trucking, standard bridge support and other auxiliary materials

E03 On site Control Panel Installation charge: Installation guidance: 1 engineer & 30 days, Commissioning and training: 1 engineer & 10 days E04

,

9 of 9

GROUP 4: ON-SITE AUXILIARY ※ Air network system for air absorbing, de-dusting, cooling, etc.

※ Non-standard parts such as slide pipes, small machine frame, platform, noise-reducing pipes, pipeline, materials, etc. ※ Big machine frames

※ Auxiliary materials such as standard parts, seals, soldering parts.

※ Pneumatic components and air compressing accessories etc.

Painting: ※ For all equipment and the auxiliary parts of the whole plant. — Local supply by customer ━ ※ Mill, Tower, Boiler and steam system.