mixer with continuos cycle for pre-mixed materials and
TRANSCRIPT
Spin 15A
220V/60Hz sphMOTOR AVAILABLE
SPIN 15A Hopper/drum capacity l 60 Mixing performance l/min 15-18 Mixer/paddle speed rpm 280 Motor power rate kW 1.4 Standard water pump - yes SPL in operator’s position dB(A) <65 Weight (with packing) kg 78 (82) Dimensions w/l/h mm 720/1380/1165-950 (max-min) Packing dimensions w/l/h mm 800/590/830
NO LIMIT WITH BAGGED PRE-MIXED PRODUCTS
Plasters Walling mortars Traditional floor screeds Self-levelling floor screeds
Mixer with continuos cycle for pre-mixed materials and fine mortarSPIN 15
Standard Equipment✓ Single-phase 230V/50Hz motor
✓ Electric control panel
✓ Hopper with bag-breaker grid
✓ Removable mixing chamber
✓ Mixing shaft with wear-resistant steel paddles
✓ Water system
✓ Water hose
✓ Water pump
Optional Accessories✓ Fine mortar mixing screw kit
✓ Flow meter kit
ApplicationsIdeal for quickly mixing premixed plasters, masonry mortars, self-levelling materials and traditional pre-mixed materials in bags. If provided with special optional kit, it is particularly suitable for mixing fine mortar for laying external insulation and tiles. In combination with a plaster sprayer, it can form a single mixing and pumping unit.
Patented IMER gearmotor
Spin 15A water pump
Flow meter kitFine mortar mixing screw kit
2525
Mort
ar
Mix
ers