mk-manta iii owner’s …...3 mtr, 20 amp 4096-mil w/clutch 155540 1 4 manta 3 stand combo fixed...

07.2019

MK-MANTA IIIOWNER’S MANUAL

& PARTS LIST

www.mkdiamond.com

Caution: Read all safety and operating instructions before using this equipment. This parts list MUST accompany the equipment at all times.

Revision 211

Manual Part# 161117

18

MANTA CORE DRILL III EXPLODED VIEW

MANTA III 4096 COMBO FIXED P/N 157448

VALVE INCLUDED WITH MOTOR

USE P/N 231248 FOR SERVICE REPLACEMENT

FITTING INCLUDED WITH MOTOR

USE P/N 152525 FOR SERVICE REPLACEMENT

1

2

3

4

5

6

1 MOTOR MOUNT INCLUDED IN 158425

Manta Drill Motor Combinations TableDrill Part# Motor Description

158639 Manta III ML4004 Combo Fixed158641 Manta III ML4090 Combo Fixed157449 Manta III ML4094 Combo Fixed158640 Manta III MK4097-20 Combo Fixed

19

MANTA CORE DRILL III PARTS LIST

MANTA III 4096 COMBO FIXED P/N 157448

ITEM NO. DESCRIPTION PART # QTY. 1 SCREW, SOC HD CAP, 1/4-20 X 1 151049 62 KEY, SQR, 3/8 X 4.0 154853 13 MTR, 20 AMP 4096-MIL W/CLUTCH 155540 14 MANTA 3 STAND COMBO FIXED 158425 15 ASSY, CONTROL BOX DUAL SWITCH 120V 158428 16 ASSY, VACUUM PUMP 110V 158530 1


158639 Manta III ML4004 Combo Fixed158641 Manta III ML4090 Combo Fixed157449 Manta III ML4094 Combo Fixed158640 Manta III MK4097-20 Combo Fixed

20

MANTA III 4096 COMBO TILT P/N 158645

VALVE INCLUDED WITH MOTORUSE P/N 231248 FOR SERVICE REPLACEMENT

FITTING INCLUDED WITH MOTORUSE P/N 152525 FOR SERVICE REPLACEMENT

1

2

3

4

5

6

MOTOR MOUNT INCLUDED IN 158426

1



158647 Manta III ML4004 Combo Tilt158649 Manta III ML4090 Combo Tilt158644 Manta III ML4094 Combo Tilt158648 Manta III MK4097-20 Combo Tilt

21

MANTA III 4096 COMBO TILT P/N 158645


ITEM NO. DESCRIPTION PART # QTY. 1 SCREW, SOC HD CAP, 1/4-20 X 1 151049 62 KEY, SQR, 3/8 X 4.0 154853 13 MTR, 20 AMP 4096-MIL W/CLUTCH 155540 14 MANTA 3 STAND COMBO TILT 158426 15 ASSY, CONTROL BOX DUAL SWITCH 120V 158428 16 ASSY, VACUUM PUMP 110V 158530 1

22

MANTA III 4096 ANCHOR FIXED P/N 167326



1

2

3

4

5




167324 Manta III ML4004 Anchor Fixed167325 Manta III ML4090 Anchor Fixed167327 Manta III ML4094 Anchor Fixed

23

MANTA III 4096 ANCHOR FIXED P/N 167326


ITEM NO. DESCRIPTION PART # QTY. 1 SCREW, SOC HD CAP, 1/4-20 X 1 151049 62 KEY, SQR, 3/8 X 4.0 154853 13 MTR, 20 AMP 4096-MIL W/CLUTCH 155540 14 MANTA 3 STAND ANCHOR FIXED 158424 15 ASSY, CONTROL BOX, SINGLE SWITCH 120V 158430 1

24

MANTA CORE DRILL III EXPLODED VIEW & PARTS LIST

MANTA III 4096 ANCHOR TILT P/N 158653



1

2

3

4

5



158657 Manta III ML4090 Anchor Tilt158652 Manta III ML4094 Anchor Tilt158656 Manta III ML4097-20 Anchor Tilt

25


MANTA III 4096 ANCHOR TILT P/N 158653

ITEM NO. DESCRIPTION PART # QTY. 1 SCREW, SOC HD CAP, 1/4-20 X 1 151049 62 KEY, SQR, 3/8 X 4.0 154853 13 MTR, 20 AMP 4096-MIL W/CLUTCH 155540 14 MANTA 3 STAND ANCHOR TILT 158427 15 ASSY, CONTROL BOX, SINGLE SWITCH 120V 158430 1

26


MANTA III CORE DRILL ASSY, DRILL STAND, FIXED, COMBO P/N 158425

1

3 4

7

8

12

15

16

17

18

19

20

21

22

23

24

25

26

27

28

32

2

6

13 14

29 9

27


MANTA III CORE DRILL ASSY, DRILL STAND, FIXED, COMBO P/N 158425

ITEM NO. DESCRIPTION PART # QTY. 1 WASHER, 1/2 SAE FLAT 150924 22 SCREW, SOC HD CAP, 1/4-20 X 1 151049 23 NUT, 1/2-13 HEX 151282 44 WASHER, 1/2 SPLIT LOCK 153524 25 LABEL, WARNING, READ MANUAL 154398 16 GASKET, NEOPRENE SPONGE 154543 17 SCREW, 1/2-13 X 3-1/2 HEX HEAD CAP 154574 28 SCREW, FLAT HD, 1/4-20 X 3/4 154657 49 COUPLING, PLUG, 1/4 X 1/4 MNPT 154658 110 LABEL, INFORMATION ON SERVICE 155038 111 LABEL, NOTICE, MOTOR PROBLEMS 155672 112 LEVEL, CIRCULAR BUBBLE, 3/4 DIA 157429 113 PLATE, AIR SEAL 157430 114 GASKET, AIR SEAL 157431 115 WHEEL, ROLLER 157434 216 CAP, PUSH 1/2" STAINLESS STEEL 157435 217 KNOB, KNURLED HD, 1/4-20 X 2-1/2 157436 118 PAD, TOGGLE, 1/4-20 (9/16 X 5/8) 157437 119 SCREW, JACK 157445 120 TAG, SERIAL NUMBER, BLANK 157500-RW 121 COLLAR, MANTA 3, 1/2 X 1 X 7/16 157518 222 KEY, 3/8" SQR X 5" 157520 123 SCREW, SOC HD, CAP, 3/8-16 X 1-1/4 157529 424 SCREW, HEX HD, TAP, 1/2-13 X 3-1/2 158284 425 BRACKET, WHEEL & VAC 158321 126 BASE, M3 VAC TILT (COMP) 158393 127 ASSY, COLUMN W/MK GEAR RACK 158425-2 128 ASSY, CARRIAGE 158425-3 129 ASSY, HUB & SPOKE 158425-6 130 LABEL, WARNING, SILICA, PROP 65 164202 131 LABEL, QR CODE 170480 132 MOUNT, MOTOR, MIL 172228 1

28


MANTA III CORE DRILL ASSY, DRILL STAND, TILT, COMBO P/N 158426

1

2

3

4

5

7

8

9

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

35

36

37

38

39

42

34 10

ITEM NO. DESCRIPTION PART # QTY. 1 WASHER, 1/2 SAE FLAT 150924 42 SCREW, SOC HD CAP, 1/4-20 X 1 151049 23 NUT, 1/2-13 HEX 151282 54 KNOB, DAVIES, 5/16-18 X 1 151681 15 WASHER, 1/2 SPLIT LOCK 153524 36 LABEL, WARNING, READ MANUAL 154398 17 GASKET, NEOPRENE SPONGE 154543 1

29


MANTA III CORE DRILL ASSY, DRILL STAND, TILT, COMBO P/N 158426

ITEM NO. DESCRIPTION PART # QTY. 8 SCREW, 1/2-13 X 3-1/2 HEX HEAD CAP 154574 29 SCREW, FLAT HD, 1/4-20 X 3/4 154657 410 COUPLING, PLUG, 1/4 X 1/4MNPT 154658 111 LABEL, INFORMATION ON SERVICE 155038 112 LABEL, NOTICE, MOTOR PROBLEMS 155672 113 LEVEL, CIRCULAR BUBBLE, 3/4 DIA 157429 114 PLATE, AIR SEAL 157430 115 GASKET, AIR SEAL 157431 116 WHEEL, ROLLER 157434 217 CAP, PUSH 1/2" STAINLESS STEEL 157435 218 KNOB, KNURLED HD, 1/4-20 X 2-1/2 157436 119 PAD, TOGGLE, 1/4-20 (9/16 X 5/8) 157437 120 SCREW, JACK 157445 121 TAG, SERIAL NUMBER, BLANK 157500-RW 122 COLLAR, MANTA 3, 1/2 X 1 X 7/16 157518 223 KEY, 3/8" SQR X 5" 157520 124 SCREW, SOC HD, CAP, 3/8-16 X 1-1/4 157529 425 SCREW, HEX HD, TAP, 1/2-13 X 3-1/2 158284 426 BRACKET, WHEEL & VAC 158321 127 TUBE, TELESCOPING BRACE, MNT 158340 128 ROD, TELESCOPING SUPPORT 158341 129 BRACKET, TELESCOPING ROD SUPRT 158342 130 BASE, M3 VAC TILT (COMP) 158393 131 SCREW, HEX HD, CAP, 1/2-13 X 4-1/2 158397 132 ASSY, COLUMN W/MK GEAR RACK 158425-2 133 ASSY, CARRIAGE 158425-3 134 ASSY, HUB & SPOKE 158425-6 135 PIN, COTTER, 1/6 X 5/8 158451 236 PIN, CLEVIS, 1/4 X 1-1/4 158452 137 PIN, CLEVIS, 1/4 X 1-5/8 158453 138 WASHER, FLAT, M22 158454 139 NUT, HEX M22-2.5 158455 140 LABEL, WARNING, SILICA, PROP 65 164202 141 LABEL, QR CODE 170480 142 MOUNT, MOTOR, MIL 172228 1

30


MANTA III CORE DRILL ASSY, DRILL STAND, FIXED, ANCHOR P/N 158424

1

2

3 4 5

6

8

11

12

13

14

15

16

17

18

19

20

21

22

23

27

24

31


MANTA III CORE DRILL ASSY, DRILL STAND, FIXED, ANCHOR P/N 158424

ITEM NO. DESCRIPTION PART # QTY. 1 WASHER, 1/2 SAE FLAT 150924 22 NUT, 1/2-13 HEX 151282 43 SCREW, HEX HD, 5/16 -18 X 1 151743 24 WASHER, SPLIT LOCK, 5/16 151747 25 WASHER, FLAT, SAE, 5/16 151754 26 WASHER, 1/2 SPLIT LOCK 153524 27 LABEL, WARNING, READ MANUAL 154398 18 SCREW, 1/2-13 X 3-1/2 HEX HEAD CAP 154574 29 LABEL, INFORMATION ON SERVICE 155038 110 LABEL, NOTICE, MOTOR PROBLEMS 155672 111 LEVEL, CIRCULAR BUBBLE, 3/4 DIA 157429 112 BRACKET, WHEEL MANTA 3 157433 113 WHEEL, ROLLER 157434 214 CAP, PUSH 1/2" STAINLESS STEEL 157435 215 SCREW, JACK 157445 116 TAG, SERIAL NUMBER, BLANK 157500-RW 117 COLLAR, MANTA 3, 1/2 X 1 X 7/16 157518 218 KEY, 3/8" SQR X 5" 157520 119 SCREW, SOC HD, CAP, 3/8-16 X 1-1/4 157529 420 SCREW, HEX HD, TAP, 1/2-13 X 3-1/2 158284 421 BASE, ANCHOR, MANTA 3 COMP 158410 122 ASSY, COLUMN W/MK GEAR RACK 158425-2 123 ASSY, CARRIAGE 158425-3 124 ASSY, HUB & SPOKE 158425-6 125 LABEL, WARNING, SILICA, PROP 65 164202 126 LABEL, QR CODE 170480 127 MOUNT, MOTOR, MIL 172228 1

32


MANTA III CORE DRILL ASSY, DRILL STAND, TILT, ANCHOR P/N 158427

1 2

3

4

5 6

7

9 12

13

14

15

16

17

18

19

20

21 22

23

24

25

26

27

28

30

31

32

33

34

37

1 2

7 1

29

ITEM NO. DESCRIPTION PART # QTY. 1 WASHER, 1/2 SAE FLAT 150924 42 NUT, 1/2-13 HEX 151282 53 KNOB, DAVIES, 5/16-18 X 1 151681 14 SCREW, HEX HD, 5/16 - 18 X 1 151743 25 WASHER, LOCK, SPLIT, 5/16 151747 2

33


MANTA III CORE DRILL ASSY, DRILL STAND, TILT, ANCHOR P/N 158427

ITEM NO. DESCRIPTION PART # QTY. 6 WASHER, FLAT, SAE, 5/16 151754 27 WASHER, 1/2 SPLIT LOCK 153524 38 LABEL, WARNING, READ MANUAL 154398 19 SCREW, 1/2-13 X 3-1/2 HEX HEAD CAP 154574 210 LABEL, INFORMATION ON SERVICE 155038 111 LABEL, NOTICE, MOTOR PROBLEMS 155672 112 LEVEL, CIRCULAR BUBBLE, 3/4 DIA 157429 113 BRACKET, WHEEL MANTA 3 157433 114 WHEEL, ROLLER 157434 215 CAP, PUSH 1/2" STAINLESS STEEL 157435 216 SCREW, JACK 157445 117 TAG, SERIAL NUMBER, BLANK 157500-RW 118 COLLAR, MANTA 3, 1/2 X 1 X 7/16 157518 219 KEY, 3/8" SQR X 5" 157520 120 SCREW, SOC HD, CAP, 3/8-16 X 1-1/4 157529 421 SCREW, HEX HD, TAP, 1/2-13 X 3-1/2 158284 422 TUBE, TELESCOPING BRACE, MNT 158340 123 ROD, TELESCOPING SUPPORT 158341 124 BRACKET, TELESCOPING ROD SUPRT 158342 125 SCREW, HEX HD, CAP, 1/2-13 X 4-1/2 158397 126 BASE, ANCHOR, MANTA 3 COMP 158410 127 ASSY, COLUMN W/MK GEAR RACK 158425-2 128 ASSY, CARRIAGE 158425-3 129 ASSY, HUB & SPOKE 158425-6 130 PIN, COTTER, 1/6 X 5/8 158451 231 PIN, CLEVIS, 1/4 X 1-1/4 158452 132 PIN, CLEVIS, 1/4 X 1-5/8 158453 133 WASHER, FLAT, M22 158454 134 NUT, HEX M22-2.5 158455 135 LABEL, WARNING, SILICA, PROP 65 164202 136 LABEL, QR CODE 170480 137 MOUNT, MOTOR, MIL 172228 1

34


ASSY. COLUMN W/MK GEAR RACK P/N 158425-2

ITEM NO. DESCRIPTION PART # QTY. 1 WASHER, #10 SPLIT LOCK 153684 42 COLUMN, MANTA 157444 13 SCREW, 10-32 X 1/2 SOCKET HEAD SET 157525 44 GEAR RACK 1/2 X 3/4 X 24" 158782 1

1

2

3

4

35


ASSY. CARRIAGE P/N 158425-3

ITEM NO. DESCRIPTION PART # QTY. 1 BEARING, BALL, 17 X 40 X 12MM 137711 22 SCREW, SOC HD CAP, 1/4-20 X 1 151049 43 KNOB, DAVIES, 5/16-18 X 1 151681 14 SCREW, SET, CPU PT. 1/4-20 X 5/16 154226 65 SCREW, FLAT HD, #6-32 X 1/2 154448 86 BODY, CARRIAGE, COMP 155757 17 PLATE, ADJUSTMENT 157317 68 SLIDE, CARRIAGE 157318 89 BACK, CARRIAGE (COMP) 157438 110 HANDLE, CARRIAGE (COMP) 157440 111 NUT, HEX NYLOK 6-32 157519 812 SCREW, FLAT HD, #6-32 X 3/8 157521 813 SCREW, PAN HD, 1/4-20 X 3/4 157523 214 SHAFT, GEAR, SHORT 158348 115 SCREW, SOC HD CAP, 1/4 -20 X 1-1/4 159336 4

1

2

3

4

5

6

7

8

9 10

11

12

13

14

15

36


ASSY. HUB & SPOKE P/N 158425-6

ITEM NO. DESCRIPTION PART # QTY. 1 KNOB, 1/2-20 FEM BALL 154486 22 PLUG, HOLE PLASTIC 3/4” 156615 13 HUB, SLIP HANDLE 157321 14 SPOKE, SLIP HANDLE 157322 15 SCREW, SET, 1/4-20 X 1/4 157528 26 KNOB, RUBBER, 1/4-20 X 3/4” LONG 159428-1 1

1

2

3

4

5

6

37


ASSY. VACUUM PUMP 110V P/N 158530

ITEM NO. DESCRIPTION PART # QTY. 1 NIPPLER, 1/4 NPT X CLOSE GALV 152598 32 PUMP, VACUUM MANTA CORE DRILL 154475 13 FILTER, WATER 154476 14 GAUGE, VACUUM 154477 15 VALVE, PETCOCK 1/4" MIP 154488 16 FITTING, T 1/4 X 1/4 X 1/4 NPT 154497 27 ELBOW, 1/4MNPT STREET 154615 18 BRAKCET, PUMP HOLD DOWN 157446 19 SCREW, TRUSS 10-32 X 3/4 157526 210 SCREW, FLAT HD 10-32 X 5/8" 157554 211 ASSY, VACUUM HOSE 157707 1

1

3

4

5

6

7

1

1

6

2

8

9

11

10

38


ASSY. CONTROL BOX, DUAL SWITCH 120V P/N 158428

ITEM NO. DESCRIPTION PART # QTY. 1 SCREW, PAN HD, #10-24 X 3/8 151097 12 CONNECTOR, CORD 1/2" 151307 13 SCREW, #6-32 X 1/2 PAN HEAD SELF TAPPING 153459 74 SCREW, PHILP SELF TAP 10-24 X 5/8" 153681 65 COVER, SWITCH 154301 26 RECEPTACLE, FLANGED 15A 125V 154473 17 AMMETER, MANTA CORE DRILL 110V 154489 18 TRANSFORMER, 120V AC 154490 19 SWITCH, TOGGLE 30 AMP 154491 210 CORD, ELEC, 12/3 SOOW, YELLOW, 18" 154494 111 PLUG, 120V, L5-20P 154556 112 HARNES, WIRE, DUAL SWITCH 154715 113 RECEPTACLE, FLANGED TWIST-LOCK 157375 114 AMP BOX, SINGLE (COMP) 158274 115 COVER, CONTROL BOX (COMP) 158276 1

1

2

3

4

5

6

7 8

9

10

11

13 14

15

39


ASSY. CONTROL BOX, SINGLE SWITCH 120V P/N 158430

ITEM NO. DESCRIPTION PART # QTY. 1 SCREW, PAN HD, #10-24 X 3/8 151097 12 CONNECTOR, CORD 1/2" 151307 13 SCREW, #6-32 X 1/2 PAN HEAD SELF TAPPING 153459 54 SCREW, PHILP SELF TAP 10-24 X 5/8" 153681 65 COVER, SWITCH 154301 16 AMMETER, MANTA CORE DRILL 110V 154489 17 TRANSFORMER, 120V AC 154490 18 SWITCH, TOGGLE 30 AMP 154491 19 CORD, ELEC, 12/3 SOOW, YELLOW, 18" 154494 110 PLUG, 120V, L5-20P 154556 111 HARNES, WIRE, SINGLE SWITCH 154715-1 112 RECEPTACLE, FLANGED TWIST-LOCK 157375 113 CON. BOX, SINGLE (COMP) 158385 114 COVER, CON. BOX SINGLE COMP 158387 1

1 2

3

4

5

6

7

9

10

12

3

8

13

40

ITEM NUMBER DESCRIPTION

1 www.MKDiamond.com

Core Bits MK-Black- Supreme Grade for Concrete & AsphaltExcellent performance in applications associ-ated with moderate to high steel reinforce-ment.

Available Diameters 1/2" - 16"

2 www.MKDiamond.com

Core Bits MK-Orange- Premium Grade for Concrete & Asphalt MK-Orange is a premium bit designed for wet drilling applications that include light to moder-ate steel reinforcement.

Available Diameters 1" - 16"

3 www.MKDiamond.com

Core Bits MK-Yellow- Standard Grade for Concrete & Asphalt MK-Yellow is an excellent choice for all types of general wet drilling.


4 www.MKDiamond.com

Core Bits MK-Blue Turbo - Professional Grade for Concrete with Steel MK-Blue is an excellent choice for all types of general wet drilling.


5 www.MKDiamond.com

Core Bits MK-Black Turbo - Supreme Grade for Concrete & Asphalt MK-Black is an excellent choice for all types of general wet drilling.


4 www.MKDiamond.com

Core Bit Extensions Multiple tube extensions may be used extending the drilling depth in increments of 12". Available Diameters 1 - 1/4" to 6 /14"

For Use with MK-Turbo Bits Only and must be order together

5

Shaft Extensions easily attach to the core bit and allow for a deeper drilling capacity. 12" Length 5/8" - 11 Male / 5/8" 11 Female 1 - 1/4" - 7 Male / 1 - 1/4" - 7 Female

6 159620Motor Spacer kit for Manta III core drill rigs with Milwaukee motors. Allows rigs to use 16" bits.

MANTA CORE DRILL III ACCESSORIES

ACCESSORIES

304149

304150

42

ORDERING INFORMATION

RETURN MATERIALS POLICY

PACKAGING INSTRUCTIONS• Remove the motor and Support Assembly• Dry the drill before shipping• When packing, include the following: Core Drill, Vacuum Pump and Accessory Pack• Package the unit in its original container or one of comparable size (do not ship the unit partially exposed)• Ensure all parts are secured in the packaging to prevent moving

AUTHORIZED SERVICE CENTERSFor quicker repair time, you may contact MK Diamond Customer Service, toll free, at 800 421-5830 or 310 539-5221 for the Authorized Service Center closest too you or visit our web site at www.mkdiamond.com. For technical questions, call – 800 474-5594.

MANTA CORE DRILL III ORDERING, RETURN, & PACKAGING

You may order MK Diamond products through your local MK Diamond distributor or, you may order direct from MK Diamond.

When ordering direct from MK Diamond, please have the following information ready before calling:• The Model Number of the saw• The Serial Number of the saw• Where the saw was purchased and when• The Part Number for the part(s) being ordered• The Part Description for the part(s) being ordered

NOTE: Standard orders are $50.00 or more when ordering direct from MK Diamond. A $6.00 charge will be added to orders having a net billing value under $50.00. A nominal handling fee of $5.00 may apply to some orders.

All parts may be ordered by calling toll free to – 800 421-5830 or 310 539-5221 and asking for Customer Service. For technical questions, call – 800 474-5594.

To expedite the service relative to the return of a product purchased through MK Diamond, please observe the following:

NOTE: When returning all items, they must have been purchased within the previous twelve (12) months.• Have the Model Number of the saw• Have the Serial Number of the saw• Have the location of where the saw was purchased• Have the date when the saw was purchased• Contact Customer Service for approval to return the item(s)• Obtain a Returned Goods Number (RGA) authorizing the return• Follow the packaging instructions in the following section• Ensure the RGA number is on the outside of the returned package• Ensure your item(s) are prepaid to the destinationFor returned items, call toll free to – 800 421-5830 or 310 539-5221 and ask for Customer Service.

43

MANTA CORE DRILL III CONTACT & LIMITED WARRANTY

CONTACTPlease contact MK Diamond Products, Inc. Customer Service Department with any questions you might have regarding distributors, parts or service.Telephone: (800) 421-5830Fax: (310) 539-5158E-mail: [email protected] Service Hours: Monday through Friday, 6AM-4PM PST

MK Diamond Products, Inc.1315 Storm ParkwayTorrance, CA 90501

© COPYRIGHT 2019, MK DIAMOND PRODUCTS, INC. ALL RIGHTS RESERVED.The MK Diamond logo is a registered trademark of MK Diamond Products, Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their re-spective owners and used with permission.

MK Diamond may have patents, patent applications, trade marks, copyrights of other intellectual property right covering this product in this document.

This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.

The information and specifications included in this publication were in effect at the time of approval for printing.

MK DIAMOND PRODUCTS, INC. will guarantee every machine they build, to be free from defects in material and workmanship for (1) one year from date of purchase. The obligation of MK DIAMOND PRODUCTS, INC. under this warranty is limited to the repair or replacement of any parts which, under normal use, prove to be defective in material or workmanship. The parts involved or the unit in question should be returned to MK DIAMOND PRODUCTS, INC. or to a point designated by us, transportation prepaid.

This warranty does not obligate us to bear the cost of labor or transportation charges in connection with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has been repaired or altered outside our factory.

This warranty does NOT obligate MK DIAMOND PRODUCTS, INC., with respect to items not of our manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and warranties.

We shall in no event be liable for consequential damages or contingent liabilities arising out of failure of any equipment or parts to operate properly.

WARRANTY: For your (1) one year warranty to be effective, complete the online Product Registration as soon as possible. Visit www.mkdiamond.com/registration

MK DIAMOND PRODUCTS, INC. LIMITED WARRANTY

MK-MANTA CORE DRILL IIIOWNER'S MANUAL & OPERATING INSTRUCTIONS

MK Diamond Products, Inc.1315 Storm ParkwayTorrance, CA 90501

Toll-Free: (800) 421-5830Phone: (310) 539-5221

Fax: (310) 539-5158www.mkdiamond.com

mk-manta iii owner’s …...3 mtr, 20 amp 4096-mil w/clutch 155540 1 4 manta 3 stand combo fixed...

Documents