mobile flitedeck training v2 2012

Copyright © 2012. All rights reserved - Jeppesen Mobile FD 2.0

Introduction

In this lesson, you’ll learn everything you need to know to start using Jeppesen Mobile FliteDeck, including:

• What’s New • Activating Your Data Subscription• Adjusting Global Settings• Accessing Common Controls • Working in Enroute View to:

- Create a route- View a route- Edit a route- Access operational, regional, and

reference notes- View enroute weather

• Working in Terminal Charts View to:- Access route airports- View chart groups- Access selected charts - Access airports without a route- Highlight a chart- Rotate a chart- View terminal weather

• Importing Routes from FlitePlan Online• Viewing Company Manuals

Jeppesen Mobile FD

What’s New


What’s New

Updates include:

• New Framework – Common Controls

Title Bar Common Controls

Brightness/ Night Theme

GPS Status

Current Route Title

Search(Enroute

Only)

Settings

Display LockManuals and Chart Change

Notices


What’s New

Updates include:

• New Framework – Common Controls– Enroute View

Terminal Charts View

Present Position

EnrouteTheme

Tap to switch orientation.

Tap to open the route drawer.

Aircraft Indicator

Enroute View

Notes

Weather

Enroute View


What’s New

Updates include:

• New Framework – Common Controls– Enroute View Route Drawer

Enroute View – Route Drawer

Tap to clear current route, airports, and associated

chart selections.

Total Flight Distance


What’s New

Updates include:

• New Framework – Common Controls– Enroute View Route Drawer Navigate to an Airport

Diagram from Airport popover.

Enroute View – Navigate to Airport Diagram

Navigate to an Airport Diagram from an airport

popover.


Terminal Charts

View

Enroute View

Airport Selector

Chart Group

Selector

Weather

Terminal Charts View

What’s New

Updates include:

• New Framework – Common Controls– Enroute View– Terminal Charts View


What’s New

Updates include:


Highlight and mark specific procedure information.

Highlights are saved until an update is downloaded that changes the chart in some manner.

Terminal Charts View – Highlights

Highlight tool

Undo last highlight.

Clear all highlights.


What’s New

Updates include:


Highlight Mode

Rotate your terminal chart by 90 degrees to optimize the display of the procedure.

The rotated chart will stay rotated through a force quit and restart.

Terminal Charts View – Rotate Chart

Rotatechart.


What’s New

Updates include:


• New Features– Night Theme – Switch to night

theme for optimal viewing on the flight deck in low lighting conditions.

Night Theme

Night Theme


What’s New

Updates include:


• New Features– Night Theme– SID/STAR Support – The

SID/STAR format can now be entered into the Route Drawer.

SID/STAR Format:

Procedure.Transition (SID) Transition.Procedure (STAR)

Enroute View – SID/STAR Support

Transition waypoints addedautomatically to the route.

Enter SID/STAR to your route.


What’s New

Updates include:


• New Features– Night Theme– SID/STAR Support– Enroute Weather – With an

Internet connection, you can view: Icing Radar (Echo Tops, Lightning) Surface Observations Turbulence Winds Aloft.

Graphical Weather

Access weather.


What’s New

Updates include:


• New Features– Night Theme– SID/STAR Support– Enroute Weather– Terminal Weather – With an

Internet connection, you can view terminal weather.

Text Weather

Access weather.

Not for Navigation


What’s New

Updates include:


• New Features– Night Theme– SID/STAR Support– Enroute Weather– Terminal Weather – Import Routes – Jeppesen

Mobile FD allows you to import routes from FlitePlan Online (FPO).

To use this feature, you must enter your FPO account in global settings.

Import Routes

Import saved

routes.

Not for Navigation


What’s New

Updates include:


• New Features– Night Theme– SID/STAR Support– Enroute Weather– Terminal Weather – Import Routes – Communicate with Aspen

Avionics Connected Panel™ –Jeppesen Mobile FD now supports Aspen Avionics Connected Panel™ allowing you to: Send routes back and forth

between the panel mounted GPS and the Aspen unit. Get the GPS location

information from the GPS.

Send route to, or receive route

from, Aspen Avionics

Connected Panel™

Send and receive routes.

Jeppesen Mobile FD

Activating Your Data Subscription


Activating Your Data

Subscription

The first time you launch Jeppesen Mobile FD you are asked to carefully read and agree to the Terms and Conditions of the End User License Agreement.

• Tap Agree to continue.



Subscription

To activate Jeppesen Mobile FD:

1. Tap the Name field to access the device keyboard and enter your name.

The name you enter allows Jeppesen Technical Support and Customer Service to identify which user in an organization activated a particular site key and which mobile application was activated.

2. Tap the Serial Number field and enter the 16-digit serial number from your current Jeppesen electronic charting subscription.

The serial number is not case sensitive, and you do not need to enter the dashes.

3. Tap Activate.

Jeff Buhl

XXXXXXXXXXXX



Subscription

After you have entered your login credentials, you are asked to read and agree to the Terms and Conditions of the Jeppesen Data License Agreement.

• Tap Agree to continue.



Subscription

Available updates are automatically identified. You can also select the manuals you want to download.

1. Tap Manuals.



Subscription


1. Tap Manuals.

A list of manuals available to your subscription appears.



Subscription


1. Tap Manuals.


2. Tap the manuals you want to download.

Red download indicators appear next to the manuals you select.



Subscription


1. Tap Manuals.




3. Tap Updates.



Subscription


1. Tap Manuals.




3. Tap Updates.

4. Tap Update.



Subscription


1. Tap Manuals.




3. Tap Updates.

4. Tap Update.

A progress indicator appears.

Depending on your connection and chart coverage selection, this may take several minutes.

5. Tap Done.

Jeppesen Mobile FD

Adjusting Global Settings



To adjust Jeppesen Mobile FD global settings:

1. Tap Settings.




1. Tap Settings.

2. Tap JeppFD.




1. Tap Settings.

2. Tap JeppFD.

3. Change the General Settings, as needed:

• Switch Restore Brightness ON to restore the default brightness setting the next time you open Jeppesen Mobile FD.

• Switch Company Manuals ON if your company subscribes to Jeppesen Document Management Services and you want to access company manuals and other documents.

• Switch Sleep Mode OFF to ensure the iPad stays on during flight. This will reduce battery life.




1. Tap Settings.

2. Tap JeppFD.

3. Change the General Settings, as needed.

4. Change the Enroute View settings, as needed:

• Switch Enable Moving Map ON to be able to center the enroute map over your aircraft location and to view the enroute map in a Track Up orientation.

• Switch Display Ownship ON to display an ownship symbol over the enroutemap when receiving a signal from a GPS or FMS transmitter.




1. Tap Settings.

2. Tap JeppFD.


4. Change the Enroute View settings, as needed.

5. Change the Terminal Charts View settings, as needed:

• Switch Display Ownship on Airport Diagram ON to display an ownshipposition over the airport diagram when receiving a signal from a GPS or FMS transmitter.

• Default Chart Zoom Level options are Fit to Width or Fit Full Chart.




1. Tap Settings.

2. Tap JeppFD.



5. Change the Terminal Charts View settings, as needed.

6. Change the METAR and TAF settings to reflect your preferences for viewing text weather:

• Temperature unit options are Fahrenheit or Celsius. Default is Fahrenheit.

• Text weather Format options are Raw and Decoded. Default is Raw.




1. Tap Settings.

2. Tap JeppFD.




6. Change the METAR and TAF settings, as needed.

7. Tap Account under the FlitePlan Online setting to enter your Jeppesen FlitePlanOnline account Username and Password. Doing so enables you to import your saved routes from Jeppesen FlitePlanOnline.




1. Tap Settings.

2. Tap JeppFD.




6. Change the METAR and TAF settings, as needed.

7. Tap Account under the FlitePlan Online setting to be able to import your saved FPO route plans.

8. Note the Application Information, which includes the Serial Number, Site Key number, and Version of the application.




1. Tap Settings.2. Tap JeppFD.3. Change the General Settings, as needed.4. Change the Enroute View settings, as

needed.5. Change the Terminal Charts View

settings, as needed.6. Change the METAR and TAF settings, as

needed.7. Tap Account under the FlitePlan Online

setting to be able to import your saved FPO route plans.

8. Note the Application Information.9. Access Jeppesen Support information,

review Terms and Conditions, and change these settings, as needed:• Switch Reset User Settings ON to

reset all of your Jeppesen Mobile FD preferences back to original settings.

• Switch Deactivate ON to remove all Jeppesen Mobile FD data, and deactivate the Jeppesen Mobile FD serial number.

Jeppesen Mobile FD

Accessing Common Controls


Common Controls -

Manuals

Controls along the toolbar allow you to quickly complete commonly performed tasks.

To view manuals in your subscription, you will first need to download a PDF reader app of your choice.

To access your manuals:

1. Tap the Manuals button.


Common Controls -

Manuals





2. Tap the manual you want to view.


Common Controls -

Manuals






3. Tap the PDF reader application of your choice.


Common Controls -

Manuals






3. Tap the PDF reader application of your choice.

Once selected, the PDF reader application opens and displays the selected manual.


Common Controls - Change

Notices

Change Notices are available based on your view.

In Enroute View you can review change notices by region.

In Terminal Charts view, you can view change notices for the selected airport.

To view change notices for a specific airport, in Terminal Charts view:



Common Controls - Change

Notices

Change Notices are available based on your view.

In Enroute View you can review change notices by region.

In Terminal Charts view, you can view change notices for the selected airport.

To view change notices for a specific airport, in Terminal Charts view:


2. Tap the Notices button.

Jeppesen Mobile FD displays change notices for the current airport.


Common Controls -

Brightness Controls

Use the Brightness controls to adjust brightness and switch between Day and Night Themes for optimal viewing on the flight deck.

To adjust the brightness of Jeppesen Mobile FD from within the application:

1. Tap the Brightness button.


Common Controls -

Brightness Controls




2. Slide the brightness control to adjust brightness.


Common Controls -

Brightness Controls




2. Slide the brightness control to adjust brightness.

Switch the Night Theme ON for optimal viewing in low light conditions.

Switch the Night Theme OFF to return to the Day Theme.


Common Controls - GPS

Status

If the Enable Moving Map setting is ON in global settings, you can view GPS status information.

To view details of your GPS status:

• Tap the GPS Status button.



Status

If the Enable Moving Map setting is ON in global settings, you can view GPS status information.

To view details of your GPS status:

• Tap the GPS Status button.

Jeppesen Mobile FD will display the:

– GPS Time– Accuracy– Current global settings for:

1. Aircraft Position

2. Ownship

An accuracy of:

• 32 m is required to display the ownship on the enroute map.

• 17 m is required to display the ownship on airport diagrams.



Status

If the Enable Moving Map setting is ON in global settings, but the GPS signal is not of sufficient strength, Jeppesen Mobile FD displays a yellow badge over the GPS Status button.

• Tap the GPS Status button for details.


Common Controls - Search

To search for a navigational object:

1. Tap the Search button.





2. Enter two or more characters into the Search field.





2. Enter two or more characters into the Search field.

3. Tap Search on the keyboard, or tap the type of object for which you want to search.

Jeppesen Mobile FD orders the search results from either the chart center or the aircraft position.


Common Controls - Settings

The Settings button allows you to:

• Identify and perform updates available for your Jeppesen data subscription.

• Access Help.

• Print (Terminal Charts only).


Common Controls - Help

To access Help:

1. Tap the Settings button.



To access Help:


2. Tap Help.



To access Help:


2. Tap Help.

3. Scroll through the list of Help topics.



To access Help:


2. Tap Help.

3. Scroll through the list of Help topics.

4. Tap Done to dismiss Help.


Common Controls - Print

To print a displayed terminal chart to an AirPrint-enabled printer:






2. Tap Print.





2. Tap Print.

3. Tap Select Printer and select the printer to which you want to print.

Your iPad automatically locates and connects to the AirPrint-enabled printers on your Wi-Fi network.





2. Tap Print.

3. Tap Select Printer and select the printer to which you want to print.

Your iPad automatically locates and connects to the AirPrint-enabled printers on your Wi-Fi network.

5. Use the Plus and Minus buttons to set the number of copies.

6. Tap Print.


Common Controls - Display Lock

The display lock feature prevents you from panning or zooming away from your current display.

• Tap the Display Lock button to lock and unlock the display.

When locked, the Display Lock button is red.

Jeppesen Mobile FD

Working in Enroute View


Working in Enroute View

In Enroute View, you can:

• Create a route.

• View a route.

• Edit a route.

• Access operational, regional, and reference notes.

• View enroute weather.

Enroute View

Jeppesen Mobile FD

Create a Route


Create a Route

To create a route:

1. Tap the route drawer bar to open the Route Drawer.


Create a Route

To create a route:


2. Tap the Origin field to access the keyboard and enter the airport ICAO identifier or search the city name.


Create a Route

To create a route:



3. Tap the Destination field to access the keyboard and enter the airport ICAO identifier or search the city name.


Create a Route

To create a route:




4. Tap the Route Drawer bar to close the Route Drawer.


Create a Route

To create a route:




4. Tap the Route Drawer bar to close the Route Drawer.

Your route is displayed and when you re-open the Route Drawer, the total

flight distance is reflected.



Create a Route

After you enter origin and destination airports, you can enter SIDs and STARs to your route.

To add a SID or STAR:



Create a Route




2. Tap the route box to access the keyboard.


Create a Route





Using the keyboard, or through copy and paste, enter the SID or STAR in this format:

– SID: Procedure.Transition For example: REBAS5.REBAS


Create a Route







– STAR: Transition.ProcedureFor example: OLM.OLM7


Create a Route







– STAR: Transition.ProcedureFor example: OLM.OLM7

3. Tap Done, or tap the Route Drawer bar to close the Route Drawer.

Transition waypoints are added to the route.

Transition waypoints are added to the route.


Create a Route

You can also enter route waypoints by tapping directly on the map.

To create a user waypoint along your route:

1. Tap and hold on the map where you want to add a user waypoint.


Create a Route




If there is more than one object in the vicinity, you’ll be asked to select one.


Create a Route





If you tap the unfilled star, this user waypoint will persist on the map after the route has been deleted.


Create a Route






2. Tap Add To Route.


Create a Route







Jeppesen Mobile FD adds the user waypoint to your route.


Create a Route







Jeppesen Mobile FD adds the user waypoint to your route.

When you open the Route Drawer, the waypoint is reflected in the route string and the total flight distance has been updated.



Create a Route

To search for a navigational object to add to your route:



Create a Route



2. Tap the Search field to access the keyboard and enter two or more characters into the Search field.


Create a Route




3. Tap Search on the keyboard, or tap the type of object for which you want to search. In this example, it’s an airport.


Create a Route





Jeppesen Mobile FD orders the search results nearest to farthest from either the chart center or the aircraft position

5. Tap the desired object from your results.


Create a Route







6. Tap Add to Route.


Create a Route







6. Tap Add to Route. You are asked how to add the navigational object. For this example:



Create a Route









8. Tap from which point you want to add.


Create a Route









8. Tap from which point you want to add.

Jeppesen Mobile FD adds the airport to your route and when you open the Route Drawer, the waypoint is reflected in the route string.

Jeppesen Mobile FD

View a Route


View a Route

To view your route on the map you can use standard iPad gestures to:

• Pan


View a Route


• Pan

• Zoom in


View a Route


• Pan

• Zoom in

• Zoom out


View a Route

You can view the enroute map with a North Up or Track Up orientation.

To change map orientation:

• Tap the Compass Rose button.


View a Route

You can view the enroute map with a North Up or Track Up orientation.

To change map orientation:

• Tap the Compass Rose button.

The display toggles between North Up and Track Up.

To switch to Track up, you must have Enable Moving Map ON in global settings.


View a Route

Depending on the current zoom level, Jeppesen Mobile FliteDeck automatically filters certain enroute map features to declutter the map appropriately.

EnrouteMap Filters


View a Route

Depending on the current zoom level, Jeppesen Mobile FliteDeck automatically filters certain enroute map features to declutter the map appropriately.

When available at a given zoom level, you can tap any of the buttons to show or hide the specific map feature.

• Tap Enroute Map Filter buttons to toggle between show and hide for:

– Airports

– Airways

– Waypoints

– NAVAIDs

– Airspace

– Terrain

EnrouteMap Filters


View a Route

You can view your route on the map in either high or low enroute theme. These are the same high and low themes as on paper enroute charts.

To change enroute themes:

1. Tap the Enroute Theme button.


View a Route




2. Tap the desired theme from the Enroute Themes list.


View a Route




2. Tap the desired theme from the Enroute Themes list.

The map displays the enroute theme that you selected.

Notice that the map scale stays constant between themes.

Map Scale


View a Route

If Enable Moving Map is set to ON in global settings, you will see a GPS Status button and a Present Position button.

GPS Status

Present Position


View a Route

To center the enroute map over your aircraft location indicated by the GPS receiver:

• Tap the Present Position button.

Aircraft Indicator


View a Route

To view details of a map object, tap and hold that object.

The object turns magenta, and Jeppesen Mobile FD displays a popover with information about that object.

Depending on the type of object you tap, you will receive additional information.

• Tap Additional.


View a Route

To view details of a map object, tap and hold that object.

The object turns magenta, and Jeppesen Mobile FD displays a popover with information about that object.

Depending on the type of object you tap, you will receive additional information.

• Tap Additional.

Jeppesen Mobile FD displays the object details.

• Tap the return button, or tap away from the popover to dismiss it.


View a Route

If you tap and hold an airport, the object details popover will display:

• Airport information.

• METAR and TAF weather.

• The option to display the selected airport diagram.

Jeppesen Mobile FD

Edit a Route


Edit a Route

Route information persists in Jeppesen Mobile FD until you clear the information.

To remove your current route, airports, and associated chart selections:

• Tap New Flight.


Edit a Route



• Tap New Flight.• Tap OK.


Edit a Route



• Tap New Flight.• Tap OK.

The route information is cleared from the Route Drawer.


Edit a Route

You can also edit your route by tapping directly on the map.

To remove a navigational object from your route:

1. Tap and hold the object you want to remove.


Edit a Route




2. Tap Remove From Route.


Edit a Route







Edit a Route






The waypoint is removed from your route, but persists on the map because it was selected as a favorite, which is indicated by the filled star.


Edit a Route







To remove the waypoint from favorite status:

• Tap and hold the waypoint.


Edit a Route









• Tap the filled star to remove the fill.


Edit a Route









• Tap the filled star to remove the fill.

• Tap away from the popover to dismiss it.

The waypoint no longer persists on the map.


Edit a Route

You can edit your route by replacing a route point with rubber-band routing.

To replace a route point:

1. Tap and hold a point along an existing route line.


Edit a Route




2. Drag the route to the desired location and release.

The object details popover displays.



Edit a Route







4. Tap Replace User Waypoint.


Edit a Route







4. Tap Replace User Waypoint.

The user waypoint is replaced and your route updated.

Jeppesen Mobile FD

Access Operational, Regional, and Reference Notes


Access Notes

Jeppesen Mobile FD provides a true paper-replacement solution. All of the notes provided on precomposedpaper charts are available here.

Notes fall into three categories:

• Operational — Tactically important operational information regarding specific navigation elements. These notes are equivalent to Ball Flag notes on paper charts.

• Regional — Specific procedures, conditions or requirements for a specific geographical region. These notes are equivalent to Floating notes on paper charts.

• Reference — Aeronautical reference information for large charted areas. These notes are equivalent to End Panel notes on paper charts.

Notes


Access Notes

Jeppesen Mobile FD notes are based on the current view and you must be zoomed into a sufficient level to access them. If you are not, you’ll receive a notice to zoom in to view note content.

To access notes along your route:

1. Tap the Notes button.


Access Notes




2. Select the type of note you want to view.


Access Notes





3. Tap the note you want to view.


Access Notes






Jeppesen Mobile FD highlights the region on the map to which the note applies.


Access Notes






Jeppesen Mobile FD highlights the region on the map to which the note applies.

4. Tap the Notes return button to return to the list of notes, or tap anywhere else on the screen to dismiss the note.

Jeppesen Mobile FD

View Enroute Weather



With an Internet connection, Jeppesen Mobile FD can display:

• Icing• Radar (Echo Tops, Lightning)• Surface Observations• Turbulence • Winds Aloft

Weather



To view weather along your route:

1. Tap the Wx button.





2. Switch Wx to ON.





2. Switch Wx to ON.

• Surface Observations are selected by default and become visible on the map as soon as the data is downloaded.

• Weather will automatically download every six minutes when the weather has been set to ON, and there is an Internet connection.

• Only one weather selection can be made at one time. In other words, you can’t display Surface Observations and Icing at the same time.



Icing

From the Weather popover:

• Tap Icing and the altitude at which you want to view it.



Icing



• Tap outside the popover to dismiss it.



Icing




• The weather legend displays the:

– Forecast button (indicating valid time)

– Weather type

– Altitude

– Issue time

– Icing legend

Weather Legend



Icing

To view the Icing Forecast:

• Tap the appropriate Forecast button.

Note:

• Jeppesen Mobile FD can display up to four icing forecast images.

• The Forecast popover displays only the valid times. Expired forecasts do not display in the popover.

• The selected forecast time is remembered until Jeppesen Mobile FD is restarted.



Radar – Echo Tops


• Tap Radar and the type of radar image.



Radar – Echo Tops






Radar – Echo Tops





– Play button (Tap to cycle through multiple images).

– Animation dots (The image displayed corresponds with the dot that is shaded. The oldest image corresponds to the left most dot).

– Age of the increments.

– Weather type.

– Echo tops legend.

Weather Legend



Radar – Lightning





Radar – Lightning





– Play button (Tap to cycle through multiple images).

– Animation dots (The image displayed corresponds with the dot that is shaded. The oldest image corresponds to the left most dot).

– Age of the increments.

– Weather type.

– Lightning legend.

Weather Legend



Surface Observations

Surface Observations are not affected by airport filtering.


• Tap Surface Observations.









– Age of the observations.

– Weather type.

– Surface observations legend.

Weather Legend



Turbulence


• Tap Turbulence and the altitude at which you want to view it.



Turbulence






Turbulence





– Forecast button (indicating valid time).

– Weather type.– Altitude.– Issue time.– Turbulence legend.

Weather Legend



Turbulence

To view the Turbulence Forecast:


Note:

• Jeppesen Mobile FD can display up to four turbulence forecast images.





Winds Aloft


• Tap Winds Aloft and the altitude at which you want to view them.



Winds Aloft






Winds Aloft





– Forecast button (indicating valid time).

– Weather type.– Altitude.– Issue time.– Winds Aloft legend.

Weather Legend



Winds Aloft

To view the Winds Aloft Forecast:


Note:

• Jeppesen Mobile FD can display up to four winds aloft forecast images.





Automatic Updates

Jeppesen Mobile FD automatically checks for weather updates every six minutes when the weather has been set to ON, and there is an Internet connection.

On this interval, all weather types are checked and only weather that has been updated on the Jeppesen Weather Services server is updated on the iPad.

You will not be alerted to connectivity problems that prevent automatic weather updates. Jeppesen Mobile FD will try to update again on the next automatic update interval.

Note the weather update status for information about the previous update.

Weather Update Status



Manual Updates

You can trigger another update by tapping the Reload button.

If the connection error occurs again, an alert box will appear.



Manual Updates



• Tap OK.




Manual Updates



• Tap OK.


If the connection error occurs again, the alert box will appear again.

If it is resolved, weather will be updated and the time of update will appear.

Weather Update Status



Expired Radar

• When looping through images, images older than two hours will not be displayed.

• If the most recent image is older than 30 minutes, it is not displayed.

Expired Surface Observations

• Surface Observations expire two hours after they are issued.

Expired Icing, Turbulence, and Winds Aloft

• Expired forecasts do not display in Forecast popovers.

Jeppesen Mobile FD

Working in Terminal Charts View


Working in Terminal Charts

View

In Terminal Charts view, you can:

• Access route airports.

• View chart groups.

• Access selected charts.

• Access airports without a route.

• Highlight a chart.

• Rotate a chart.

• View terminal weather.

Terminal Charts

View

Jeppesen Mobile FD

Access Route Airports



To access your terminal charts once you have created a route:

• Tap the Terminal Charts button.



To access your terminal charts once you have created a route:

• Tap the Terminal Charts button.

The first time you access Terminal Charts view after creating a route,

the view defaults to the origin airport and the Airport Diagram is displayed.



To access terminal charts for destination or alternate airports:

1. Tap the Airport button.




1. Tap the Airport button.2. Tap Route Airports, if not already

selected.





selected.3. Tap the desired route airport.





selected.3. Tap the desired route airport.4. Tap the chart group for the chart

type you desire.






type you desire.5. Tap the chart.






type you desire.5. Tap the chart.

The desired terminal chart displays.



You can also select a chart for quick access. With the chart displayed:

1. Tap the chart group from which the chart belongs.





2. Tap the Selected tab.

The chart is now listed under the Selected tab.

The next time you select that chart group for that airport, the Selected tab displays the last viewed selected chart.


Chart Groups

To access a chart from a different chart group for your selected airport:

1. Tap the chart group for the chart you want to view.

The chart selection popover displays a list of all charts of that type.


Chart Groups




2. Tap the chart you want to view.


Chart Groups




2. Tap the chart you want to view.

Terminal Chart Groups

• Reference (REF) – non-procedural charts, sorted alphabetically by title.

• Standard Terminal Arrival (STR) – arrival charts, sorted alphabetically by title.

• Approach (APP) – approach charts, organized by runway.

• Taxi (TXI) - taxi charts, sorted by index number.

• Standard Instrument Departure (SID) –departure charts, sorted alphabetically by title.


Selected Charts




Selected Charts



2. Tap the Selected tab.

The chart is now listed under the Selected tab.

The next time you select that chart group for that airport, the Selected tab will display the last viewed selected chart.


Selected Charts

To view all charts of that group again:

• Tap the All tab.


Selected Charts

To remove a selected chart from the Selected tab:

• Tap Edit.


Selected Charts


• Tap Edit.• Tap the Remove button.


Selected Charts


• Tap Edit.• Tap the Remove button.• Tap Remove.


Selected Charts


• Tap Edit.• Tap the Remove button.• Tap Remove.

The chart is removed from the Selected tab.


Access Airports Without a

Route

You can also access terminal charts for an airport without a route.




Route



2. Tap the All Airports tab, if not already selected.



Route




3. Tap in the Search field to access the keyboard and enter the ICAO identifier or city name.



Route





4. Tap the airport for which you want to view terminal charts.



Route





4. Tap the airport for which you want to view terminal charts.

The Airport diagram for that airport displays and you can now select any available terminal chart for that airport.

If there are no charts available for a specific chart group, the chart group button is inactive. In this example, Reference charts are not available for this airport.

Jeppesen Mobile FD

Highlight a Terminal Chart



To highlight your terminal chart:

• Tap the Highlight button.

You are now in highlight mode and the Undo and Clear All tools display.






Your finger now acts as a highlighter on the chart.






Your finger now acts as a highlighter on the chart.

• Tap the Highlight button to exit highlight mode.



To remove the last highlight:

1. Tap the Highlight button, if you are not already in highlight mode.

2. Tap the Undo button.

3. Tap the Highlight button to exit highlight mode.



To remove all highlights:


2. Tap the Clear All button.






3. Tap Clear All.






3. Tap Clear All.

All of the highlights are removed.

4. Tap the Highlight button to exit highlight mode.

Jeppesen Mobile FD

Rotate a Terminal Chart



To rotate your terminal chart clockwise 90 degrees:

• Tap the Rotate button.



To rotate your terminal chart clockwise 90 degrees:

• Tap the Rotate button.

Each time you tap the Rotate button rotates the chart another 90 degrees.

Jeppesen Mobile FD

View Terminal Weather



METARs and TAFs are accessible in two areas in Jeppesen Mobile FD. In the:

– Enroute view through the Airport popovers.

– Terminal Charts view for the selected airport.



To view terminal weather from the Terminal Charts view:

• Tap the Wx button.

• Your preferred view of terminal weather, Raw or Decoded, is set in global settings.

– Note that METAR and TAF updates occur separately.

– If the weather data is expired, a weather warning displays in red in the same location as the weather age. The warning tells you how long ago the weather expired.

– METARs are not displayed 6 hours after issued.

– TAFs are not displayed 12 hours after issued.

TAF Age

METAR Age

Jeppesen Mobile FD

Importing Routes from FlitePlan Online


Importing Routes from FPO

After entering your FPO account information in global settings, the Import button appears in the Route Drawer.

To import a plan from FPO:

1. Tap the Import button.


Importing Routes from FPO

After entering your FPO account information in global settings, the Import button appears in the Route Drawer.

To import a plan from FPO:

1. Tap the Import button.

2. Tap on the desired route.

Jeppesen Mobile FD

Viewing Company Manuals



If your company subscribes to Jeppesen Document Management Services, and you switched the global setting for the Company Manuals option to ON, the next time you launch Jeppesen Mobile FD, you will be asked to log in with your company credentials.

1. Tap the Username field to access the device keyboard and enter your username.

2. Tap the Password field and enter your password.

Both the username and password are case sensitive.

3. Tap Login.



Once you login with your company credentials, to download the available company manuals:






2. Tap Updates.





2. Tap Updates.

3. Tap Manuals.





2. Tap Updates.

3. Tap Manuals.

4. Under Company Manuals, tap the document or manual you want to download.





2. Tap Updates.

3. Tap Manuals.


5. Tap Updates.





2. Tap Updates.

3. Tap Manuals.


5. Tap Updates.

6. Tap Update.





2. Tap Updates.

3. Tap Manuals.


5. Tap Updates.

6. Tap Update.

7. When the update is complete, tap Done.





2. Tap Updates.

3. Tap Manuals.


5. Tap Updates.

6. Tap Update.

7. When the update is complete, tap Done.

Next time you tap the Manuals button, your Company Manuals will be included.


Summary

• This lesson covered everything you needed to know to start using Jeppesen Mobile FD, including:

• What’s New • Activating Your Data Subscription• Adjusting Global Settings• Accessing Common Controls • Working in Enroute View to:

– Create a route– View a route– Edit a route– Access operational, regional, and

reference notes– View enroute weather

• Working in Terminal Charts View to:– Access route airports– View chart groups– Access selected charts– Access airports without a route– Highlight a chart– Rotate a chart– View terminal weather

• Importing Routes from FlitePlan Online• Viewing Company Manuals

mobile flitedeck training v2 2012

Documents

jeppesen mobile

whats newupdates

pdf reader

standard ipad

oldest image

connection

compass rose

fliteplan