MOBILE SCUD Features

For more information go to

www.scudagchem.com.au

Or call Pete Munns 0428 86 1119

Outlet

Valve

3-way valve

Middle position is off

Up position is SCUD tank rinse

Down position is waterfold granule mix on

SCUD pump on/

off switch

Suction probe for drums without

Micromatic valves

Micromatic

Coupler for

Envirodrums

Mounted on

micromatic rinser for easy

flushing of

pump

6m of 12volt

power cable

Fresh water

feed for

granule mix-

ing SCUD

tank rinse and 20 ltr

drum washer

Designed by Peter Munns

Manufactured by TSI Beacon

(08) 9686 1119

SIMPLIFIED CHEMICAL TRANSFER SYSTEM

MOBILE SCUD R

MS150 Instructions

Mobile SCUD Instructions

The Mobile SCUD can be adapted to suit any spraying situation from a small boom spray to

the largest self propelled machine.

It can induct granules, mix granules and measure liquid chemical from 1000ltr shuttles, Envi-

rodrums or 20 ltr drums.

There are a few different ways to set up and use the mobile SCUD. The first decision is to

work out what sort of system you require. Do you use a lot of granules? Do you mainly trans-

fer liquid? Do you need to mix granules? The answer to these questions will determine the

best way to set up your filling system. Some initial set up time will save a lot of time when it

counts.

There are some diagrams on the opposite page to help you select your set-up.

The first set up is the 3-way ball valve outlet set up inline. This set up is good for bulk gran-

ule induction and allows closed circuit mixing for hard to mix granules and powders. Is excel-

lent for bulk liquid transfer and allows for simple boom spray hook up. It is a good system for

multi farm fill points.

The second diagram shows the standard outlet set up to a pump with a three way ball valve on

the pump. This system is similar to the first but is better suited to a single fill point or a nurse

cart or truck set-up.

The bottom diagram shows a venturi set up. The Venturi set up however, does need to be fed

with a pump that can deliver enough pressure to make the venturi work. This system allows

bulk granules to be inducted dry and is also good for transferring liquids.

There are other ways to set-up the Mobile SCUD but these three basic systems are a good

place to start for finding the ideal system set-up. If your SCUD mixer came with a single ball

valve outlet you can easily change it to a 3-way outlet or Venturi.

3-way outlet Set up

Normal outlet Set up

Venturi Set up

Fill

pump

Spray

Tank

SCUD

Water feed Outlet

Water Source

Spray

Tank

SCUD

Fill

Pump

Spray pump

Water

Source

SCUD

Spray tank