RevisionYEAR 11

Topic lists and information from your subjects

M O C K E X A M

G U I D E

Compassion Achievement Respect EndeavourThe cornerstones of our learning community

Contents Introduction

Mock Exam Timetable

Subject revision checklist Business Art GCSE PE Science Maths English Drama Music Textiles Geography History Modern Foreign Languages Resistant Materials Food Tech Dance Religious Studies Electronics Health and Social Care Creative iMedia

Introduction Dear Students, Parents and Carers,

Students often ask, ‘Are the mock exams important?’ ‘Do they count for anything?’ My answer is always an overwhelming YES!

The mock exams in December are a really important stage of a student’s preparation for their GCSE exams in the summer of 2021. In the same way that a marathon runner will train hard for their race and do their best to simulate the race day conditions, the mock exams give students the opportunity to sit a significant number of exams over an intense period of time. This gets them accustomed to the challenges and demands of the exam period.

The Department for Education has made it clear that they intend exams to take place as normal next summer. However, if circumstances change and they do not take place, how well students do in their mock exams is likely to be an important consideration in any centre assessed grades.

Their mock exams also offer them the chance to identify strengths and areas to work on in particular subjects. This will inform their revision going forwards.

Imberhorne 6th form together with other post-16 institutions will also use mock exam re-sults to inform their decisions when it comes to offering places on particular courses. All post-16 courses will have entry requirements.

The mock exams are really important. Take the time to prepare and revise properly and use them as a dry-run for the real thing in the summer.

Work hard and good luck!

Mr D Jones

Assistant Headteacher

LUNCH 1.45 LINE UPWEDS 2

DECTHURS 3 DECFRI 4 DEC

TUE 8 DEC

WED 9 DEC

THUR 10 DEC

TUE 15 DEC

Creative iMedia Coursework

P4

Creative iMedia Coursework

P5

FRI18 DEC

English Literature (Paper 1) 1 Hr 45

French Writing 1 Hr 15 (H)/1 Hr (F)German Writing 1 Hr 15 (H)/1 Hr (F)

Italian Writing 1 Hr 15(H)/1 Hr(F)Spanish Writing 1 Hr 15 (H)/1 Hr (F)

MOCK EXAMINATIONS - YEAR 11 December 2020

MORNING 8.45 LINE UP SESSION 2 11.10 LINE UP

Art (5 Hrs) - 11Y/Ar1 (Rm 119) (20), 11V/Ar1 (Rm 120)(21)

Art (5 Hrs) - 11Y/Ar1 (Rm 119) (20), 11V/Ar1 (Rm 120)(21)

Week 14B

MON 7 DEC

H&SC Practical Assessment - All Day (Compulsory)

Geography 1 Hr 30 Drama 1 Hr 45Creative iMedia 1 Hr 15

Science (Chemistry P1) 1 Hr 15Triple Science (Chemistry P1) 1 Hr 45 Maths (Non-calc) 1 Hr 30

Maths (Calc) 1 Hr 30 History (Paper 1) 1 Hr 15

FRI 11 DEC

Dance Practical - All Day (Compulsory), Di Gasson

Business Studies 1 Hr 30Music 1 Hr 15

RE 1 Hr 45English Language (retake) 1 Hr 45 -

selected students only

Week 15A

MON 14 DEC

Technology (Res.Mat, Text) 2 HrsFood - 1 Hr 45

Electronics - 1 Hr 30

BTEC Sport - Coursework P3 & 4BTEC Business - Coursework P3 & 4

Dance 1 Hr 30PE 1 Hr 15

School Ends 12.20pm

INSET DAY

THUR17 DEC

Music Solo Performance exams - all dayBTEC Business - Coursework P1 & 2

Creative iMedia -Revision P1 & 2

Spanish Listening 45m(H)/35m(F)Spanish Reading 1Hr (H)/45m (F)

Further Maths 1 Hr 30

French Listening 45m (H)/35m (F)French Reading 1Hr (H)/45m (F)

German Listening 45m(H)/35m(F)German Reading 1Hr (H)/45m (F)

WED16 DEC

Music Solo Performance exams - all day

GCSE PE - Coursework P1 & 2

Italian Listening 45m(H)/35m(F)Italian Reading 1Hr (H)/45m (F)

M

on

Tu

e W

ed

Thu

Fr

i Sa

t Su

n

8-9

am

9-1

0

10

-11

11

-12

12

-1p

m

1-2

2-3

3-4

4-5

5-6

6-7

7-8

8-9

pm

Sam

ple

Wee

kly

Rev

isio

n T

imet

able

—R

em

emb

er t

o in

clu

de

bre

aks

and

tre

ats

Art The Art mock exam is 10 hours over a period of 2 days.

It will be a sustained final piece based on your portrait project.

Your final piece can be done in a range of media…from paint to pastels de-

pending on your final ideas that you have explored in your sketchbook.

This final piece must convey meaning and communicate a message which

you have demonstrated throughout your ideas development.

This final piece will be entered as part of your GCSE coursework which is 60%

of your overall grade.

GCSE PE Number of Papers: 1

Length of Exam: 1 Hr 15

Equipment: pen, pencil, rubber, ruler, calculator.

UNITS 1 – 4 (Nothing from unit 5)

UNIT 1: APPLIED ANATOMY & PHYSIOLOGY

• Structure and functions of the skeleton, muscular system and the cardio-respiratory system.

• Aerobic & anaerobic exercise

Effects of exercise on the body

UNIT 2: MOVEMENT ANALYSIS

• Types of levers

• Basic movements

Planes of movement and axes of rotation

UNIT 3: PHYSICAL TRAINING

• Health& fitness, components of fitness and fitness testing.

• Principles of training, training thresholds, types of train-ing &training seasons

Preventing injury, warm-ups and cool downs

UNIT 4: SPORTS PSYCHOLOGY

• Skill & ability

• Goals and targets

• Information processing

• Guidance and feedback

• Arousal

• Aggression

Personality types and motivation

Useful revision resources or activities

PE GCSE BITESIZE, AQA smart cards, re-

vision guide

Business Number of Papers: 1

Length of Exam: 1 Hr 30

Content of each paper:

The examination is out of 90 The paper is divided into 3 sections SECTION A 35 marks SECTION B 30 marks SECTION C 25 marks Students answers all of the questions

Equipment: Calculator can be used

Year 11 2.1 Growing the business

Business growth Changes in business aims and ob-

jectives Business and globalisation

2.2 Making marketing decisions Product Price Promotion Place Using the marketing mix to make decisions

Topic lists: Year 10 1.1 Enterprise and entrepreneurship

The dynamic nature of business Risk and reward The role of business enterprise

1.2 Spotting a business opportunity Customer needs Market research Market segmentation The competitive environment

1.3 Putting a business idea into practice

Business aims and objectives Business revenues, costs and profits Cash and Cash flow Sources of business finance

1.4 Making the business effective

The options for start up and small businesses

Business location The marketing mix Business plans

1.5 Understanding external influences on

business Business stakeholders Technology and business Legislation and business The economy and business External influences

Creative

iMedia

Number of Papers: 1

Length of Exam: 1 Hr 15

The Exam is worth 25% of your overall grade.

Learning Objective 1: Understand the purpose and content of pre-production Understand the purpose and uses for:

Mood boards (e.g. ideas and concepts for a new creative media product development, assisting the genera-tion of ideas)

Mind maps/spider diagrams (e.g. to show development routes and options for an idea, or component parts and resources needed for a creative media product)

Visualisation diagrams (e.g. for still images and graphics)

Storyboards (e.g. for use with video, animation,)

Number of scenes and set or location for the scene

Scene content or Direction (e.g. what happens in the scene, interaction)

Timings Camera shot type (e.g. close up, mid, long) Camera angles (e.g. over the shoulder, low

angle, aerial) Camera movement (e.g. pan, tilt, zoom or us-

ing a track and dolly) Lighting (e.g. types, direction) Sound (e.g. dialogue, sound effects, ambient

sound, music) Locations (e.g. indoor studio or other room,

outdoor) Camera type i.e. still, video, virtual camera for

animations, 3D modelling or computer games

sounds (e.g. for actions or events) Characters involved dialogue (e.g. intonation, loudness)

Scripts (e.g. for a video production, voiceover, comic book or computer game)

Learning Objective 2: Be able to plan a pre-production Client requirements / success criteria

Understanding the target audience: Gender, age, ethnicity, income, location, acces-

sibility Research : Primary / Secondary sources

File types: for print (TIFF, EPS) / on screen (PNG, JPEG, GIF)

The use of work plans and schedules should include: Tasks, activities, work flow, timescales, re-

sources, milestones, contingencies Hardware and software used identifying the tools that

can be used for creative projects

Health and safety: Risk assessment, location recces and safe working practices

Legislation - Assets to be sourced: Copyright, Trademarks, Intellectual Property

Other relating to the production stage: Data protection, privacy, defamation, certification and

classification Use of copyrighted material and intellectual property

Learning Objective 3: Be able to produce pre-production documents You should know how to create a:

Mood board Mind map/spider diagram Visualisation diagram or sketch Storyboard

But also to analyse a script (e.g. scenes/locations, charac-ters, resources and equipment needed) The properties and limitations of file formats for still imag-es, audio, moving images, i.e.video and animation . You should be aware of suitable naming conventions (e.g. version control, organisational requirements) This will help you identify appropriate file formats needed to produce:

Pre-production documents Final products in line with client requirements

Learning Objective 4: Be able to review pre-production documents Finally, you should know how to:

Review a pre-production document (e.g. for format, style, clarity, suitability of content for the client and target audience)

Identify areas for improvement in a pre-production

Document (e.g. colour schemes, content and skills used)

Students have been given a revision guide

which features all the relevant materials

needed to succeed in this exam.

To help you revise there are also a number

of questions and extension tasks which

you should be completing.

Speak to Mr Aucock or Miss McCusker to

locate past papers.

Dance Number of Papers: 1

Written Exam: 1 Hr 30

Dance mocks include:

Practical mock to show 2mins of own choreography (exam paper released September 2015)

Theory written paper 1hour 30mins.

Revision materials: Class folders contain revision packs, access to the set works on the school Dance pages on the internet and class PowerPoints are available in resources.

Theory mock preparation:

Section A: Hypothetical choreography question (students have been given an example to use for re-vision) Short answer questions 1-4 marks. Content has been covered for section A and all work in both students exercise books and choreography booklets will support this section.

Section B: Evaluative writing based on own performance and choreography. Students will revise sec-tion B in class time in preparation for the mocks. Longer answer questions, three questions, all 6 marks each.

Section C: Anthology – students have a revision guide based on the 6 works studied on the course. Up until the mocks, longer type questions will be set in preparation for the paper. All 6 works can be accessed on the Dance homepage and students have the set links. Essay type questions are expected here with up to 12 marks.

Students have exercise books and revision packs that will need to be taken home nearer the time for mocks. Students can take these home as and when but must be brought to all dance lessons.

https://www.google.com/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=2ahUKEwj4sNT9lojeAhUFqaQKHb2PB70QjRx6BAgBEAU&url=https%3A%2F%2Frosebankdancingschool.co.uk%2F&psig=AOvVaw20--B_la9lyhMpEO29RS-T&ust=1539683672644898

Drama Number of Papers: 1 Length of Exam: 1 Hr 45

Topics

Section A: Multiple Choice.

Four quick questions. Make sure you know:

Staging configurations

The names of the areas of the stage

Role and responsibilities in the theatre

[4 marks = 5 minutes]

Section B: Blood Brothers set text

You will be provided with ONE scene from Blood Brothers (approximately 1.5 pages of script) and all the

questions will relate to that scene. [Reading the scene and questions = 5 minutes]

Q6.1: you will design a set or costume for a particular scene or character. You need to link this to your

knowledge of the social class and time period of the play. [4 marks = 5 minutes]

Q6.2: You will need to state how you would perform one line of dialogue given to you. Which vocal and

physical acting skills would make this line effective? [8 marks = 10 minutes]

Q6.3: You will need to state how you would perform an extract from the scene and how the other actors

would perform their roles as well. You will link to a range of acting skills. [12 marks = 15 minutes]

Q6.4: You will be given a character from the show and need to state how you would perform this charac-

ter in the scene given and also how you would perform that character in the rest of the play. [20 marks =

25 minutes]

Section C: Live Theatre Production

You will analyse and evaluate how one or more actors used their

physical and vocal skills in one production you have seen on the

course.

You will answer this in reference to ‘Billy Elliot – The Musical’. See

Office365 for the extracts you will be writing about.

[32 marks = 40 minutes]

You need to refer to these skills in Sections B and C of the written

exam:

https://www.google.co.uk/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=2ahUKEwib1-bx0I_eAhWyxIUKHYNkCQ8QjRx6BAgBEAU&url=https%3A%2F%2Falexandracollege.eu%2Fdrama-department-exam-success%2F&psig=AOvVaw0Z6mVq-SaW-LcWXZiz84IH&ust=15399397841

Electronics Number of Papers: 1

Length of Exam: 1 Hr 30

Mock exam: 1 paper lasting 1hr 30min

Data sheet includes formula for: resistor colour codes, voltage divider, power calculations, amplifier gain, mono-stable time period, astable frequency, time on/time off

Equipment needed: Calculator, pen, and ruler

• Electronic systems & sub-systems, i.e. input, process, output

• Sensing: light, temperature, magnetic field, pressure, moisture, sound, rotation

• Signal processing: Logic gates, latch, time delay, comparator

• Outputs: lamp, buzzer, solenoid, LED, actuator (servo), motor, loudspeaker

• Use of Transducer drivers

• Circuit diagrams: draw and analyse circuits using standard circuit symbols

• Current & voltage rules in series and parallel circuits

• Ohms law, power, and energy transfer

• Resistors: How to use colour codes. Tolerance bands. Resistors in series & parallel

• Voltage dividers. Sensing circuits using voltage dividers, e.g. light & temperature

• Pull-up & pull-down resistors in series with switches to provide logic inputs

• Current limiting resistors, e.g. choosing a resistor to protect an LED calculation.

• Transistor characteristics: Use in switching circuits (ON when Vbe = 0.7V). Transfer characteristic (Off–linear–saturation). Gain calculations in linear region

• MOSFET operation and equation. Use in switching circuits

• Comparators: design and operation

• Logic systems: gates & combinational logic, logic levels, Boolean algebra

• NOT, AND, OR, NAND, NOR, truth tables

• Boolean identities, e.g. A.B, A+B, etc.

• Designing logic systems from truth tables

• NAND gate redundancy

• Timing circuits – RC networks, Monostable, Astable, capacitors

• Voltage across capacitor as it charges/ discharges, interpreting graphs

• Action of 555 monostable + timing formula

• Astable mark-space ratio & frequency formulae

• Astable amplitude & time period measured using an oscilloscope

• Sequential systems — D Type flip flops: action of, i.e. rising edge triggered

• Applications, i.e. data transfer, latches, 1 and 2 bit binary counters

• Displaying characters on 7 segment displays

• Drawing and analysing timing diagrams for binary & BCD counters

• Resetting counters at a given value

• Interfacing

• Describe the operation of a Schmitt Inverter to de-bounce mechanical switches and analogue sensors

• Compare the action of transistors, comparators and Schmitt inverters

• Design interfacing circuits using transistors, comparators and Schmitt inverters

The topic headings (IN BOLD) correspond with the e-book in resources (component 1 in the Y10 electron-

ics folder, component 2 in Y11)

English Literature Number of Papers: 1

English Literature Paper 2: Modern Text & Nine-

teenth Century Text

Length of Exam: 1 Hr 45 mins

Section A: Modern Texts

Source Text – An Inspector Calls, by J B Priestley (Closed Book examination)

There are two questions to choose from. Only answer ONE.

Questions 1&2: How does Priestley explore/present…? How does [character or theme] develop…?

[30+4 marks available]

Students should explore the play as a whole, making connections between different parts of the play.

Responses should include analysis of the methods used by the writer to describe or present a particu-

lar theme or character, with reference to context where appropriate to support the interpretation.

Quotations should be offered for support and analysis of vocabulary choices/use of imagery (similes,

metaphors, personification etc.) should be provided. Alternative interpretations should be considered.

4 marks are available for SPaG in this response.

Allow 50 minutes for this question. (10-15 minutes should be spent planning)

Section B: Nineteenth Century Text

Source Text – The Strange Case of Dr Jekyll and Mr Hyde (Closed Book examination)

Students will be provided an extract from the novella.

Question 26: Starting with this extract, how does Stevenson present.. [30 marks available]

Students should explore the significance of theme or character as presented in the extract and then

link extract to the text as a whole. Responses should include an analysis of the methods used by the

Stevenson and the meanings created by them, with reference to context where appropriate to support

the interpretation.

Quotations from both the extract and the novella as a whole should be offered for support . Analysis

of vocabulary choices/use of imagery (similes, metaphors, personification etc.) should be provided to

support students’ ideas/ responses. Alternative interpretations should be considered.

Allow 50 minutes for this question. (10-15 minutes should be spent planning)

https://www.google.co.uk/imgres?imgurl=http%3A%2F%2Frta.org.af%2Feng%2Fwp-content%2Fuploads%2F2016%2F02%2Fbook.png&imgrefurl=http%3A%2F%2Fengne.euforic.co%2Fa-book%2F&docid=sifpl8ppTY7dVM&tbnid=tqdLHGwWgPMQXM%3A&vet=10ahUKEwiYhrTN3YjeAhWO2KQKHdAfCWoQMwiz

Food Tech Number of Paper: 1

Length of Exam:

1 Hr 45

Google classroom : lzibyhs –Food Tech Revision

Food Preparation and Nutrition GCSE Exam

The written paper is in two sections and worth a total of 100 marks.

Section 1 will be multiple choice style questions and worth 20% of the exam marks

Section 2 will be longer and more analytical type questions requiring written answers and worth 80% of

the exam mark.

The exam will cover the following topics:

Nutrition and health

Protein, Fat, Carbohydrates, Water soluble vitamins, Fat soluble vitamins, Antioxidants, Minerals

Healthy eating, the Eatwell Guide, portion sizes, nutritional analysis and costing of recipes.

Nutritional needs of different life stages, different dietary groups, energy needs, obesity, coronary heart

disease, high blood pressure, bone health, dental health, iron deficiency and type 2 diabetes.

Food Science

Why food is cooked and how heat is transferred to food, selecting appropriate cooking methods.

Functional and chemical properties of Protein, carbohydrates, fats and raising agents, uses of eggs.

Food Safety

Micro-organisms and enzymes, the signs of food spoilage, micro-organisms in food production, bacterial

contamination.

Buying and storing food, preparing and cooking food.

Food Choice

Factors which influence food choice, food choice related to religion, cultural ethical and moral beliefs

and medical conditions.

Food labelling and market influences.

British and international cuisines.

Sensory evaluation.

Food provenance

Food and the environment, food sources, sustainability of food and food security.

Primary and secondary processing, how processing affects the sensory and nutritional properties of in-

gredients.

Technological developments associated with better health and food production.

N.B. Use your revision guides, work books, notes form year 10 and flash cards to help with your revision.

Supporting PowerPoints and other documents can be found in:

Student Resources\Subjects\Key Stage 4\Technology\Yr 11\YEAR 11 Food\Revision

Geography Number of Papers: 1

Length of Exam: 1 Hr 30

Exam technique Know the command words:

Describe – what it is like

Explain/ suggest – how or why, use connectives such as because, this is due to

Compare – similarities and differences, use comparing connectives e.g. whereas, between the two points you

are comparing

Assess – explain all aspects and reach a judgement as to the most important

Evaluate – weigh up and use the information to make a judgement or conclusion

Select and justify – select one option and explain why you choose it using the information provided; add infor-

mation on why you did not choose the other options

Use Figure 1 to… - use ONLY the source and include data or information from the source

Use Figure 1 and your own knowledge – you must include something from the source

Use a case study to… - use only one case study

Learn facts for the case studies (significant number of lessons) and located examples

Paper 1: Global Geographical Issues - 37.5% of the qualification, Tuesday 22nd May, 1hr 30 minutes

Question 1: Hazardous Earth – Tectonic Hazards: earthquakes and volcanoes; Climate Hazards: hurricanes. Located

examples: Earthquakes – Japan 2011 - Pakistan 2008; Hurricanes - New Orleans, USA, hurricane Katrina, August

2005 - Myanmar, cyclone Nargis, May 2008

Question 2: Development dynamics. Case study: India

Question 3: Challenges of an urbanising world. Case study: Mumbai

Paper 2: UK Geographical Issues - 37.5% of the qualification, Tuesday 5th June, 1hr 30 minutes

Question 1: The UK’s evolving physical landscape

Question 2: Coastal change and conflict. Located example: Holderness

Question 3: River processes and pressures. Located example: River Eden, Cumbria

Question 4: Investigating a UK Geographical Issue – physical geography

Question 5: The UK’s evolving human landscape

Question 6: Dynamic UK cities. Case Study: London

Question 7: Investigating a UK Geographical Issue – human geography

Paper 3: People and Environment Issues – 25% of the qualification, Monday 11th June, 1hr 30 minutes

Question 1: People and the biosphere

Question 2: Forests under threat – Tropical Rainforest and Taiga

Question 3: Consuming energy resources

Question 4: Making a geographical decision – material is provided in the exam which the students will study and

then make a decision about the best course of action

H & S C Number of Papers:

Length of Exam: 2 Hrs coursework

Only applicable if you are resitting the year 10 exam, RO21 Essential Values of Care in January or June 2021 L01 Understand how to support individuals to maintain their rights Why it is important to maintain individual rights How practitioners will maintain the 5 basic rights below (3 C’s & PE)

Choice Protection from abuse and harm Confidentiality Equal and Fair Treatment Consultation L02 Understand the importance of the values of care and how they are applied 3 generic values of care How not applying them affects people who use services 8 early years values of care Examples of how all above can be applied Reflective practice L03 Understand how legislation impacts on care settings Key aspects of all listed legislation: Children Act 2004 Health & Safety at work Act 1974 Equality Act 2010 Data Protection Act 1998 (GDPR 2018) Mental Health Act 2007 How each in list above impacts practitioners and people who use the service. How legislation in general and specific legislation above impacts practitioners and service users L04 Understand how personal hygiene, safety and security measures, and procedures protect individu-als. Personal Hygiene procedures Safety procedures Moving & handling Hand washing Protective clothing Food Hygiene Reducing spread of infection Reducing risk/danger/accidents Security measures Emergency procedures Please use class notes and sections given from revision guide for more detail

ALL STUDENTS must ensure all coursework tasks are completed with maximum depth to maximise grades ALL YEAR 11 HEALTH AND SOCIAL CARE STUDENTS WILL BE COM-PLETING A PRACTICAL ASSESSMENT DURING THE YEAR 11 MOCKS. IT IS COMPULSORY AND YOU MUST ATTEND.

3 C’s & PE

History History

Number of papers = 1.

Time = 1 hour 15 minutes

GOOGLE CLASSROOM CODE = 5tjeumc

Paper 1 - Medicine in Britain, c1250–present and The British sector of the Western Front, 1914–18: injuries, treatment and the trenches.

Number of Papers: 1

Length of Exam: 1 Hr 45

Section A Medicine in the trenches 1914-1918 – 16 marks in 25 minutes.

WHAT DO I NEED TO REVISE? The evacuation route, trench design and layout, illnesses and injuries, treatments and surgery for bat-tle injuries and trench illnesses, FANY, RAMC, Stretcher Bearers, the different battle zones, blood transfusions, terrain on the Western Front, different sources from the First World War. WHAT QUESTIONS DO I NEED TO ANSWER? 1) Describe 2 features of…… (4 marks in 5 minutes)

Remember to identify and develop each point and give really detailed knowledge. 2) How useful are sources A and B for an enquiry into…. (8 marks in 15 minutes) Judge how helpful the content and provenance (type of source, author, date, purpose of the source)

of each source has been to answer your question. Think about what you learn from each source? Can you trust the sources? You need to write 3 PEEL paragraphs per source. The content is useful because… the provenance is

useful because… overall the source is mainly useful/not useful because… . 3) How would you follow up source B to find out more about….. (4 marks in 5 minutes) Detail in the source I would follow up… Question I would ask… What type of source could I use…. How this might help answer my question….

Section B Medicine in Britain 1250-present 36 marks in 50 minutes.

WHAT DO I NEED TO REVISE? Care & who treated you, treatments, surgery, preventions, causes of disease in the 4 time periods: • Medieval Britain 1250-1500 - C13th, C14th, C15th. • Renaissance Britain 1500-1700 - C16th C17th. • C18th C19th - 1700-1900. • Modern Britain 1900 – present day - C20th C21st. You will be assessing CONTINUITY and CHANGE/PROGRESS between the time periods. WHAT QUESTIONS DO I NEED TO ANSWER?

1) Explain one reason why x & y where different/similar between these 2 time periods (4 marks in 5 minutes) – 1 detailed PEEL paragraph. Give information about both time periods and then explain why the change or similarity has occurred.

2) Explain why (12 marks in 15 minutes) - 3 PEEL paragraphs, no introduction, no conclusion. 3) “Quote” how far do you agree with the view (16 marks plus 4 spg in 30 minutes) – 2x PEEL

paragraphs why you agree with the statement, 2 x PEEL paragraphs why you disagree with the statement, conclusion explaining overall how much do you agree/disagree

Modern Foreign Languages Paper 1 – Listening Marks

35 minutes (Foundation Tier) 45 minutes (Higher Tier)

40 marks (Foundation Tier) 50 marks (Higher Tier)

Paper 2 - Speaking

Please remember there is no speaking exam in the 2021 MFL GCSE.

Not applicable.

Paper 3 – Reading Exam

45 minutes (Foundation Tier) 1 hour ( Higher Tier)

60 marks (Foundation and Higher Tier)

Reading exam and translation into English

Paper 4 – Writing Exam

1 hour (Foundation Tier) 1 hour 15 minutes (Higher Tier)

50 marks at Foundation Tier 60 marks at Higher Tier

Useful revision resources or activities : Online resources such as Memrise, Quizlet etc.. You can also use your vocab and grammar booklets to revise. Learn your verb tense care-

fully and complete some past listening and reading papers.

TOPICS

Greetings

Numbers

Telling the time

Weather

Weather

Opinions

Connectives

Question words

Saying when you do things

Months, days, seasons

Family and relationships

Physical descriptions

Character

Animals and colours

Where you live

Places in town

Describing your town

Shops

Directions

Clothes

Shopping

Daily routine

Helping around the house

Festivals and special occasions

Hobbies

TV and cinema

Food

Restaurant role plays

Healthy eating

Health and illness

Countries and nationalities

Transport

The journey

Where do you go on holiday?

Accommodation

Holiday

Future plans

Environment

Social problems

Jobs

Technology

School subjects

School day and facilities

Life at school

Comparing different schools

School rules

GRAMMAR

Ways of saying “a” “some” and “the”

Plurals

Possessive adjectives

Adjectival agreements

Idioms

Negatives

Prepositions

Direct object pronouns

Present tense verbs

The future tenses

The imperfect tense

The perfect tense

The preterit tense (Spanish)

The conditional tense

Music Number of Papers: 1

Length of Written exam: 1 Hr 30

Music Solo Performance Exams: room 118 on

Wednesday 16th and Thursday 17th December

Eight questions in total (two for each area of study)

Two set works, plus unfamiliar music

We will issue you with an official revision guide

Area of Study 1 – Musical Forms and Devices

The meaning of ‘Western Classical Tradition’ and why it is important

Forms and structures

Typical musical devices used by composers

Set work - Eine Kleine Nachtmusik

Area of Study 2 – Music for Ensemble

Sonority, timbre and texture

What is meant by the term ‘ensemble’

Chamber music ensembles

Ensembles in musical theatre

Jazz and Blues ensembles

Area of Study 3 – Film Music

Origin of film music

Creation and development of film music

The function of music in the movies

The use of the musical elements to create different moods and effects in film

music

Musical devices and techniques found in film music

Area of Study 4 – Popular Music

Rock and pop

Musical features of rock and pop

Musical fusion

Bhangra

Set Work—Since You’ve Been Gone

http://www.google.com/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=2ahUKEwjis5ifz4DeAhULzYUKHV0YBUIQjRx6BAgBEAU&url=http%3A%2F%2Fpamis.org.uk%2Fnews%2Ftag%2Fmusic%2F&psig=AOvVaw0qaBybYFp2Bk7oKWLA3qDg&ust=1539423944444890

Religious

Studies

Number of Marks

Command Word Structure Number of

minutes

1 Which one of…. Circle / tick or write the correct word 1 min

2 Name two Give two NO sentence required. Keep it as brief as possible 2 mins

4 Explain…influences Explain...similar… con-trasting (Could ask for main reli-gious tradition of Great Britain = CHRISTIANITY)

Number your points: 1.Point Explain / develop 2.Point Explain / develop

4 mins

5 Explain...Refer to sources of wisdom or authority in your answer

1.Point Explain / develop 2.Point Explain / develop Include a religious teaching

5 mins

12 Evaluate For (including religious views) Evaluate Against (including religious views) Evaluate Conclusion (based on the for and against information)

12-15 mins

https://www.google.co.uk/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=2ahUKEwiiyNTxpY3eAhVJWxoKHbgKCFcQjRx6BAgBEAU&url=https%3A%2F%2Fwww.albemarle.org.uk%2Fgcse-level-religious-studies.html&psig=AOvVaw0MWUmqaWeGA0gT7hWCwQmq&ust=153985943https://www.google.co.uk/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=2ahUKEwiiyNTxpY3eAhVJWxoKHbgKCFcQjRx6BAgBEAU&url=https%3A%2F%2Fwww.albemarle.org.uk%2Fgcse-level-religious-studies.html&psig=AOvVaw0MWUmqaWeGA0gT7hWCwQmq&ust=153985943

Resistant

Materials Section A – Core Technical Principles. Everyone has to answer all of the questions.

The depth of knowledge needed for Section A is not to KS4 GCSE level but to the level that you were taught during KS3

Science, textiles, electronics and resistant materials.

Number of Papers: 1

Length of Exam: 2 hours (in 3 sections)

Equipment: Black pen, pencil, rubber, ruler, set

squares, protractor, calculator.

Revision guide pages

24 - 27 Systems and control

36, 37 Forces

18 Metals

17,

23,

Timber

Manufactured Boards

19 Plastics

20, 46 Fabrics

20, 44 - 47, Materials sources and origins

Revision guide pages

16 Board

14,15 Properties of materials.

74,75, 56, 57, Finishes

32, 33 Smart and modern materials

Composite materials

2, 3 Manufacture

6, 7 Product sustainability

28, Mechanisms

Section B – Specialist Technical Principles - you answer the questions according to your chosen specialism which is ‘Timber’.

Revision guide pages

49, 60 Stock forms

44 Manufactured boards (3 types)

37 Reinforcing/strengthening materials

38, 39 Scale of production

68 - 70 Shaping processes

10, 11 Environmental, social and ethical impact of products

Section C – Designing and Making Principles – you answer relevant questions according to your chosen specialism, which is Timber.

Revision guide pages

99,

96,

plus102

Specifications and key words:-

Suitability for the user

Aesthetic quality

Ergonomics

96, Anthropometrics

4,5, 68, 79, 90, CAD/CAM

106, 107, 114 Modelling and prototyping

- Tessellation and area of shapes. Calculating wastage when cutting shapes from a sheet material.

You should know this from Maths. Don’t panic.

111, 108 Orthographic and Isometric Projection

6 Climate change

Science Number of Papers: 1

Length of Exam: 1 Hr 15 but Triple 1 Hr 45

Content of each paper: Chemistry C1 paper

Equipment: black pen, pencil, ruler and calculator

Chemistry Unit one

This is Topics C1 to C5 in every type of Revision Guide

Any useful revision resources or activities

Foundation Science Revision Guide pages 96 to 136

Higher Science Revision Guide pages 96 to 140

Chemistry (triple) Revision Guide pages 12 to 65

and check your science Google Classroom for more ideas.

Maths 2 papers

Paper 1 = non-calculator

Paper 2 = calculator

Each paper is 1 Hr 30

Equipment: (Calculator), pen, pencil, ruler, pro-

tractor, compasses & rubber

Revision lists and revision materials are all in Google Classroom

If you have not signed into Google Classroom yet then do the following:

Find the Google Classroom invitation email and follow the links

Or

Search for Google Classroom

Click login

Sign in using your school email account and school

password

Use the code nmzmy3m for Foundation or uigb5x6 for Higher

Textiles

Number of Papers: 1 Length of Exam: 2 hours (in 3 sections) Equipment: Black pen, pencil, rubber, ruler, set squares, protractor, calculator.

SECTION A – Core Technical Principles

Revision guide

The depth of knowledge needed for Section A is not to KS4 GCSE level but to the level that you were taught during KS3 Sci-ence, textiles, electronics and resistant materials.

p24 - 27 Systems and control: recognise the difference between input, process and output and know simple electronic components and symbols.

36, 37 Forces. Know the difference between tension, compression, shear, torsion and bending forces and how they can act on differ-ent objects.

18 Metals:- ferrous, non-ferrous. What is the difference between them? Name ferrous and non-ferrous metals and know their properties and uses. Use of protective coatings to prevent ferrous metals from rusting. Eg. Paint, enamel, plastic coatings.

17, 23,

Timber:- basic principles of hardwoods and softwoods. The difference between them. Name them and their different properties. Manufactured Boards:- MDF, plywood and chipboard.

19 Plastics:- what is the difference between thermoforming and thermosetting plastics? Know each type of plastic, their properties and uses.

20, 46 Fabrics:- Natural fibres. What are they? How are they harvested? What are their origins?

20, 44 - 47, Materials sources and origins: have basic knowledge of natural/synthetic materials and how the raw materials are extracted and processed. Eg:- cotton is grown, plastics are manufactured using oil as the raw material.

16 Board:- name and describe types of board and their properties and uses.

14,15 Properties of materials. 74,75, 56, 57, Finishes: examples, uses and techniques/processes. Eg:- Spot varnishing, reasons for using it and how it is applied to a printed

product using screen printing. Stain protection on fabrics and textile products. 32, 33 Smart and modern materials:- Know what a smart or modern material is. What is the difference between them? What smart

materials react to their environment? How? Composite materials:- what is a composite material?

2, 3 Manufacture:- Production methods. Eg:- JIT – Just in Time manufacturing. Systems and automation

6, 7 Product sustainability:- ‘No product lasts forever’ points 1-6. ‘Some products aren’t designed to last but some are’ – points 1-4 . eg:- planned obsolescence, design for maintenance. What do these terms mean?

12,13 Powering systems:- renewable and non-renewable energy. What are the pros and cons of the different types of energy? 28, Mechanisms:- Types of motion, Function of a lever. Order of levers.

Mechanical advantage. Velocity ratio – see worksheets.

SECTION B – Specialist Technical Principles

20, 21 Stock forms:- what stock forms are used in textiles? Name of stock forms and primary sources eg silk from a silk worm.

21 and Power-Point

Manufacture of wool and cotton:- from raw material to finished product. What are the processes in turning animal fleece/wool to yarn? Cotton plant into yarn? Sequence/flow chart and or sketches. Be able to briefly explain what happens at each production stage.

20 Properties of silk fabric: - Why is this a useful fabric for products? Good for dyeing?

75 and PowerPoint Reinforcing/strengthening fabric:- Why are materials reinforced? Why is fabric strengthened? Laminating and interfacing

38, 39 Scale of production. What are the 4 scales of production? Why are products manufactured to different scales? Single use? Bespoke? Demand? Event/special occasion?..... How do manufacturing processes differ from one scale of production to another? Eg:- Hand-made v automated?

85 Printing processes:- Screen printing. Be able to explain the industrial printing process and its suitability for printing a sim-ple design on a t shirt. Be able to write notes and or sketches about it.

6, 7, 8, 9 Environmental, social and ethical impact of products. Why must designers consider these points during design and manu-facture of a product?

SECTION C – Designing and Making Principles 99, 96, 97

plus102

Specifications and key words:- What is a specification and why are they important to designing successfully? Suitability for the user:- Function. Ease of use. Aesthetic quality – the product’s appearance, design style, colour, shape and so on… Ergonomics – comfort, fit, feel….

96, Anthropometrics. What does this term mean? What needs to be measured? Eg:- distance between pupils when getting a new pair of glasses. Why must designers consider anthropometrics when designing products?

4,5, 68, 79, 90, CAD/CAM. Pros and cons. Speed? Accuracy? What else?

106, 107, 114

Modelling and prototyping: techniques used and reasons for making prototypes. Modelling materials or systems used to test ideas – identify methods relevant to textiles eg:- calico, computer generated design – CAD/CAM

- Percentages, Tessellation and area of shapes. Calculating wastage when cutting shapes from a sheet of material. You should know this from Maths. Don’t panic.

111, 108 Orthographic and Isometric Projection:- know the difference between the two types of drawing, how the drawings are constructed and their layout.

https://www.google.com/imgres?imgurl=https%3A%2F%2Fd30y9cdsu7xlg0.cloudfront.net%2Fpng%2F39184-200.png&imgrefurl=https%3A%2F%2Fthenounproject.com%2Fterm%2Fneedle-and-thread%2F39184%2F&docid=E6rCsmh4cnnKGM&tbnid=SEz9NqK0o_u1NM%3A&vet=10ahUKEwj44tzU2IDeAhW

Blank PageY11 Mocks - Dec Timetable.pdfDec Mock TimetableTimetable + Main rooms