MODEL: SDI57HY

Hybrid Portable Test Monitor

User Manual

Hybrid Portable Test Monitor 3

Precautions• Always handle the unit with care to avoid damaging the LCD display panel. Damage caused by

physical shocks is not covered by the product warranty.

• Avoidgettingfingerprintsonthescreen.Tocleanthescreen,wipeitwithaclean,softanddrytowel,beingcarefulnottodamagetheLCDdisplaypanel.

• Toreducetheriskoffireorelectricshock,donotexposetheLCDtorainormoisture.

• Donotconnectpowertothevideoinput/outputports.Itwillcauseamalfunction.

• Onlyusetheapprovedbatterychargerincludedinthepackage–afiremaybecausedifanonunapprovedchargerisused(iftheredLEDflickersduringrecharging,requestaftersalesservice).

• Thebuilt-inLi-Polymerbattery(11.1V/2200mA)hasasixmonthwarranty-effectivefromthepurchasedate.Donotuseanyanothertypeofbatteryonthisportablemonitorasitmaycauseafireorexplosion.

• Thebatterycouldbedamagedifashortcircuitispresentattheconnectingport,orifthepolarityofthepower cable is reversed.

• Whensupplyingpowertothecameraviathetestmonitor,alwaysusetheenclosedpowerharness(DCJack).

• Whensupplyingpower,connectthepowercabletothecameraandthenapplypower.Otherwise,ashortcircuitmightbeinducedwhichautomaticallyswitchestheunitofftoprotectthebattery.Ifashortisproduced,turnthemonitoroff,removeandre-insertthepowerharness(DCJack).Thenturntheunit on again.

• KeeptheunitinsidethecarrybagtoprotecttheLCDscreenfromscratches.

• Donotputthemonitoron,ornear,anythingelectricallyconductiveorexposetheunittorainormoisture.

• Immediatelyswitchtheproductoffifitemitssmoke,makesanabnormalnoiseoremitsstrangeodours.

• Iftheunitisnotworkingproperly,pleasecontactyourdistributor.Pleasedonotdisassembletheunityourselfasitwillinvalidatethewarranty.

Hybrid Portable Test Monitor 4

1. Introduction

OverviewTheSD157HYisamulti-functionalAnalogue/HD-SDI/HDMIportabletestmonitor.Itcanbeusedforvariouspurposes,includingcheckingvideosignals,adjustingcameraangleofviewandfocusing,supplyingpower to camera and controlling a speed dome camera.

Features• 7-InchWideTFT-LCDDigitalLEDBacklitPanel• Variousinputs:HD-SDI(3G),HDMI(1080p60),VGA(1600x1200),CVBS• PTZcontrolviaRS-485communicationforspeeddomecameras• Coaxialcommunication(UptheCoax).ControlscameraOSDmenu/PTZovercoaxcable

(Max.800monRG6)• Supplypowertothecamera(DC12V/500mA)• HD-SDI,HDMIEmbeddedAudioOutputwithSpeaker• Leather bag and strap• Li-Polymerbattery(3hoursofuse)

Applications• Displayvideosignalsoradjustcameraangles.• Checkspeeddomecameras,PTZcamerastatusorcontrolPTZ.• ControltheOSDmenuofacamerawhichsupportscoaxcommunication.• CheckHD-SDI,HDMISignals.• Check the distance at which HD-SDI Repeaters & Receivers should be installed.• Check DVR VGA outputs• TestandinstallPOC(PoweroverCoax)Camera(HD-SDI,CVBS)(Optional)

Main Unit Leather Bag& Shoulder Strap

AccessoriesCharger &

Power CordPower Harness

2. Components

 

Hybrid Portable Test Monitor 5

 

1 2 3 4 5 6 7 8

No. Marking Function

DC12VChargetheBuilt-InLi-PolymerBattery(withIncludedCharger)or,SupplyPowertotheCamera(DC12V/500mA)viaPowerHarness.

RS-485 RS-485CommunicationforPTZReceiverandSpeedDomeCamera

HDMI INPUT HDMISignalInput(Max.1920x1080p60Hz)

HD-SDI INPUT HD-SDISignalInput(Max.Resolution:~3G)PowerOutput(WhenUsingPowerOverCoaxFeature)

VGA INPUT UXGAInput(Max.Resolution:1600x1200)

VIDEO

TERM With Loop Through Output: HI-Z Position

INPUTCVBSVideoSignalInputCoaxialCommunication:PTZReceiveror Speed Dome Camera Power Output (When Using Power OverCoaxFeature)

POWER PowerSwitch(ON/OFF)

3. Product Parts and Peripheral Device Connection

Part Names and Functions

1

2

3

4

5

6

7

8

Hybrid Portable Test Monitor 6

Buttons for Each of the Functions

HDMI16:91920x1080p60

11

3

3

2

2

Button Camera Menu RS-485 & Coax Mode

Angle Guide Video Input

MODE PTZ&OSD Mode Switch

Source Change

EXIT Operate in PTZ Mode

Angle Mode Out Zoom In (Analogue)

MENU Operate in OSD Mode

Menu ON

ESC Operate in OSD Mode

Menu OFF

Multi-WayKey

Up,Down,Right,Left

Pan/Tilt/Zoom/Focus

Up,Down,Right,Left

ENTERKey

ENTER SelectBar

MenuOperationButtons

Video Status• InputMode:HD-SDI,HDMI,VGA,CVBS• DisplayMode:4:3,Full(16:10),16:9,Zoom1,Zoom2• InputResolution:1920x1080p60,NTSC,PAL

BatteryStatus• Therearesevenstepsindicatingbatterystatus.090%070%050%

Hybrid Portable Test Monitor 7

Connection Diagram

※Onlyusetheincludedpowerharnesscablewhensupplyingpowertoacamera.

HD-SDI Input• ConnecttoHD-SDIcamera/outputthepowertocamerausingpowerovercoaxfeature(Inputdata

bitrate:~3G).

Analogue Video Input• Connect to Analogue Camera• Outputthepower(DC12V/500mA)tocamerausingpowerovercoaxfeature.• UsingCoaxcommunicationfeature(Coaxitron),itispossibletocontrolthecameraOSDmenuora

PTZSpeedDomecameraviacoaxialcable.

VGA Input• ConnecttoDVRorComputerandUXGAissupportedatmaximumresolution;higherresolutionsmay

not be displayed normally.

HDMI Input• ConnecttoDVR,ComputerorotherdevicewhichoutputsHDMIsignal(Resolution:~1080p60Hz).

PTZ & OSD Control Through RS-485• ConnecttoPTZReceiverand/orSpeedDomeCameraasacontroller.Also,connecttocontrollerasa

PTZreceivertocheckifthecontrolleroutputsdataaccurately.

 

Hybrid Portable Test Monitor 8

4. Menu Setting

SELECT MENU• Press MENUButtonandmainmenuisdisplayed,asshownbelow.• PressthedirectionalbuttonstomoveUp,Down,RightorLeft.

Themenumodeisautomaticallyswitchedoffifyoudon’tpressanybuttonsforafewminutes.

   

   

 

PICTURE SET

※ Power over coax feature (Video+Power) for Analogue VP camera and VP transmission devices.

• UsingthePowerOverCoaxfeatureoftheHybridTestmonitor,it’spossibletosupplypowertoVP(Video+Power)analoguecamerasviacoaxialcable.

• Power Over Coax feature for Analogue VP camera (Optional):Whenit’snecessarytousethePowerPOC(PowerOverCoax)feature,forinstallationandmaintenanceofananalogueVPcameraorotherVPTransmissionproduct,pressandholdthe‘Enter’keyfor3secondsormore,andtheVPfeatureisactivated;afterdetectingifthedeviceautomaticallysupportsthePOCfeature.

• Contrast:Toadjustthecontrastrange(0 ~ 100steps)• Brightness:Toadjustthebrightness(0~100steps)• Hue:Toadjustthecolour(0~100steps)• Saturation:Toadjustthechroma(0~100steps)• Picture Mode: Standard > Movie > Vivid > User Thevalueofeachmodechangesautomatically• Scale:Toadjustthescreenratio(Full>4:3>Zoom1>Zoom2>16:9)• Reverse:ToreversetheupperandlowersidesoftheLCDscreen.

 

Hybrid Portable Test Monitor 9

ANGLE MODEIndicationlines:Toadjusttheviewinganglesbasedonaspecificarea.

   

• SelectingANGLEMODEdisplaysagreenboxandthecameraanglezoneindicationlines.• PresstheSETMENUbuttontoselectthesizeofthegreenbox.PresstheSETMENUbuttonagain

andselectthesidelinesoftheboxyouwanttoadjust,andpressthe///buttonstosetthepositionofeachline.

• ToexitANGLEMODE,presstheEXITKEY.

   

   

RS485 & COAX MODE (PTZ / OSD Control)

• MODE:InRS-485TxandCOAXmodeyoucancontrolthePTZ&CameraOSD.InRx.mode,itreceivesthePTZcontroldata(asHEXvalues)anddisplaysthedataonthemonitor.InAnalysermode,itanalysestheprotocolsreceivedthroughtheRS-485portanddisplaystheHEXvalueandcommand.

• PROTOCOL:Toselecttheprotocoloftheequipmentwhichyouwanttocontrol.• ADDRESS:Toselecttheaddressoftheequipmentwhichyouwanttocontrol. ※ In COAX mode, you can control the camera regardless of the address• BAUDRATE:Toselectthecommunicationspeed(2400,4800,9600,19200,38400). ※ In COAX mode, you can control the camera regardless of the baud rate• START:Tostartcontrollingthedeviceaftersettingalltheabovemenus.• EXIT:ToexitfromMENUMODE

Hybrid Portable Test Monitor 10

※Built-inProtocols:

No. Company Protocol Product Model

01 DONGYANGUNITECH(OSD)

D-MAX DSC-300S/270S/230S Series(HighSpeedPTZDomeCamera)

DOH-240S Series (SpeedPTZDomeCamera)

DPC-200 (MiniPTZDomecamera)

DRX-500,DRX-502A(CCTVPTZreceiver)02 DONGYANG

ELECTRONICSDY-255RXC DY-255RXC

03 FINESYSTEM FineSystem CRR-1600i/s04 INTER-M VRX-2201 VRX-220105 HONEYWELL(OSD) Honeywell HRX-2000,ScanDome-Ⅱ06 LGMultiX(OSD) LG MultiX LPTEP551PS/

EI551PS/OS551HQ/OI551HQ/OI511HQ07 LG LPT-A100L LG LPT-A100 LPT-A100L08 PANASONIC(OSD) PanasonicC CS600,CS650,CS564,CS85X,…09 PANASONIC PanasonicN CS564CS854/A,…10 GENIE Pelco-D GenieASD,GenieNSD11 GENIE Pelco-P GenieASD,GenieNSD12 SAMSUNG

ELECTRONICS(OSD)

Samsung SCC-641/3/07,…,SCC-64xSeries

13 SAMSUNGTECHWIN(OSD)

Techwin SPD-xxxxSeries

14 SUNGJIN Sungjin RECEIVER/MPU15 SYSMANIA Sysmania ORX-100016 VICON Vicon Stn V1311RB,V1310RB,V1200R-LM,etc.receivers17 VICON ViconExt Surveyor Dome Series18 IKEGAMI Ikegami35 PCS-3519 IKEGAMI Ikegami358 PCS-35820 NEWBORN

HIGHTECHNEWBORN

21 TOKINA TOKINA DMP22 ERNITEC(OSD) ERNA BDR-51x,BDR-55x,BDR-575,ICU23 BOSCH BoschOSRD Receiver/Drivers,G1,G2,G3,VEZ,andG4Series

AutoDomes24 GSPSYSTEMS CYBERSCAN125 HITRON FastraxII FastraxII(HID-2404)26 YUJINSYSTEMS YujinSys. EPT-5000S/6000S27 DYNACOLOR DSCP Dyna. DSCP dynacolorDH801,DH701andDH60028 LADON Ladon29 HANIL STM MCU-1200N MCU-1200N,1400N,1500N30 LILIN_MLP2 LILIN_MLP231 LILIN_FastDome LILIN Fast32 AMERICAN

DYNAMICSAD SpdDome

The protocols marked with ‘(OSD)’ are available to controlling CAMERA OSD Menu.

Hybrid Portable Test Monitor 11

RS-485 (TX)

• Displaysthecurrentsettingmodeatthetopofthescreen.• PressSETKEYinMULTIWAYKEYselectiontoselectPAN/TILTorZOOM/FOCUSmode.-RED:P.T.ZMODE-BLUE:OSDMODE• PresstheModeKEYtoselectCAMERAOSDcontrolmode.• PresstheMENUKEYtocontrolCAMERAOSDandpresstheESCKEYtoexitOSDMENU.• IncaseofBOX/DOMECamera,holdtheENTERKEYtoselecttheOSDMenu.• PressEXITKEYtogotothepreviousmode• (inCAMERAOSDmode,switchtoPAN/TILTmodefirst,inordertoexit).• Press///buttonsfollowingtheOSDguidanceonthescreen.

※ Caution• TheHybridTestmonitorhastwodifferentPELCO-DProtocols,whicharePELCO-DPROTOCOL

andPELCO(CNB).• ForPELCO-DPROTOCOL,itispossibletoenterthecameraOSDmenubyusingMENUkey.

(SETPRESETCOMMAND)• ForPELCO(CNB)PROTOCOL,itispossibletoenterthecameraOSDmenubyusingMENUkey

(GotoPRESET)orESCkey(RunPRESET)• Dependingonthecameramanufacturer,thecommandtoenterthecameraOSDMenuisdifferent.

   

   

RX

• Displaysthecurrentsettingmodeatthetopofthescreen.• DisplaystheconnectionstatusoftheRS-485lineindicatedbyaHEXvalue.• ThereceiveddataviatheRS-485portisdisplayedasamaximumin8linesinbytes(16byte).• Whenthedataismorethan128byte,it’sclearedoutautomatically.Youcanalsoclearitout

temporarily,usingtheESCbutton.• Togotothepreviousmenu,presstheEXITbutton.

Hybrid Portable Test Monitor 12

COAX [UP THE COAX] Control

• Displaysthecurrentsettingmodeatthetopofthescreen.• PresstheSETKEYinMULTIWAYKEYselectiontoselectPAN/TILTmodeorZOOM/FOCUSmode.-RED:P.T.ZMODE-BLUE:OSDMODE• PresstheModeKEYtoselecttheCAMERAOSDcontrolmode.• PresstheMENUKEYtocontroltheCAMERAOSD,andtheESCKEYtoexitOSDMENU. For BOX/DOME Cameras, Hold the ENTER KEY to select OSD Menu• PresstheEXITKEYtogotothepreviousmode.InCAMERAOSDmode,switchtoPAN/TILTmode

firstinordertoexit.• Press///buttonsfollowingtheOSDguidanceonthescreen.• Listofcontrollablemodels

   

   

No. Company Protocol Product Model

01 Samsung Techwin PELCO-C All models to supportCOAXcommunication(WINNER5)

02 Pelco PELCO-C All models to supportCOAX communication

03 Dongyang Unitech PELCO-C All models to supportCOAXcommunication(PIXIM)

04 SamsungE A1 All models to supportCOAX communication

※ PELCO-C PROTOCOL in Hybrid Test monitor is compatible with all the product models above.Also, this product can control COAX in a remote side through the automatic NTSC/PALrecognition without any set-up.

ANALYSER• UsingAnalysermode,thetestmonitorrecognisesthereceiveddatapacketanddisplaystheaddress

and command.

• Addr: Show the address. • Cmd: Show the command• Packet:ShowtheHexcodeofthereceiveddata.

Hybrid Portable Test Monitor

• Language:KOR/ENG/JAP/RUS• OSD Dwell Time: To set the time to turn

the monitor menu OFF• BACKLIGHT:Toadjustthebrightness

oftheLEDMonitor.• Setting Initialisation: To initialise all

settings.• Version: To display the product

Firmware version and the date.

SYSTEM SET

• To set the System

5. SpecificationSD157HY Hybrid Test Monitor

LCD DISPLAYRESOLUTION 1024x600(RGB)SIZE 7inch(Diagonal)PIXELPITCH 0.15mm(H)x0.15mm(V)BRIGHTNESS(cd) Typ: 250CONTRAST RATIO Typ: 500ViewingAngle

Horizontal 75°Vertical 75°

RESPONSE(ms) 35VIDEO INPUT HDMI ~1080p60

HD-SDI ~3GCVBS NTSC/PAL 1.0Vp-pXVGA Max.1600x1200,60Hz

CONNECTPORT HDMI INPUT HDMI C Type FHD-SDI INPUT BNC-FVGA INPUT D-SUB15-PinRIGHTANGLETYPECVBSVIDEOINPUT BNC-FRS-485 Pan/Tilt/Zoom/Focus

ControlOSD Control

POWER INPUT DC12.6V(exclusiveAdapterincluded)OUTPUT DC12VCOLOUR Dark GreyBATTERY 2xLi-Polymer:11.1V,2200mA(protection

circuitapplied)POWER

CONSUMPTIONWith HDMI input 6.5WWith HD-SDI input 7.5WWith VGA Input 6.5WWithCVBSInput 6.5W

TEMPERATURE 0℃~+50℃HUMIDITY 0%~80%WEIGHT SET:920g,BAG:640gTotal:1.6kg

DIMENSIONS(WxHxD)(Excludingthebag) 240.9x153.4x50mm

 

13

14

15

GENIE CCTV LTD.CCTVHouse,CityPark,Watchmead,WelwynGardenCity,Hertfordshire,AL7ILT

Tel:+44(0)1707330541Fax:+44(0)1707330543www.geniecctv.com

Edition.GN-February2013