modular flexibility - aquadam · 2019. 5. 9. · awwa d103-97: (american water works association)...

2
DID YOU KNOW? Aquadam products are manufactured by applying the latest techniques in structural engineering design and analysis. This means that when you invest in one of our products you can be sure that it’s designed according to a recognised code of practice so that it will be effective in any setting and circumstance. AGRI TANK Modular flexibility The Agri Tank is available in capacities ranging from 15 m 3 to more than 2 762 m 3 and with a diameter ranging from 2,35 m to 19,66 m. Consequently, we offer a product for a wide range of specifications and requirements. Zincalume steel bolted tanks are suited to tough environments where dependability is vital. They can withstand extreme environments in any urban, rural, or remote location. The modular design principle of the tank kits offers ease of transport and assembly on site. The tank shell The tank wall is constructed from 1,0 mm to 6,0 mm zincalume steel panels, a metal that will last seven times longer than galvanised steel, with a life expectancy of more than 20 years. The zinc in the coating protects the exposed steel. Panels can also be colour coated at an optional extra. By adding cathodic protection that will corrode at a far lower rate than galvanised steel, corrosion of the zincalume panels is slowed down or even stopped. The roof design The tank roof is constructed using 55 mm full hard zincalume corrugated sheeting. The roof is trafficable across roof trusses, complete with a heavy-duty lockable access hatch. The roof is light and weatherproof, and designed to withstand wind speeds of up to 200 km/h. The roof can be fitted with a ventilator to prevent condensation on the inside and with an internal and external ladder for easy access. The roof can be sealed to make it bird and rodent proof. Potable PVC liner Aquadam uses a potable PVC (polyvinyl chloride) liner with woven base fabric polyester yarn 1100/1440 d/tex. These non-tear liners are manufactured as a heat-welded homogenous unit with welded seams of 50 mm wide. Anchoring of the tank Tank foundations can vary depending on the size, the application and the design requirements of the tank. A reinforced concrete ring beam is required to anchor the tank, especially for larger tanks and for installations in extreme windy conditions. Aquadam gives you detailed drawing and site preparation requirements for each installation. Modular flexibility The bolted nature of the tanks makes building very quick when compared to welded or concrete structures. It also allows the existing tanks to be unbolted and moved on to new locations when needed, significantly increasing asset value. Engineered designs will accommodate secure tank storage for local environmental conditions, such as high wind speeds, snow or seismic loads. The bolted tank and silo system allows for structural designs to be used in various configurations, including water storage reservoirs, water standpipes and elevated water distribution tanks. We guarantee that the Agri Tank will not leak for 20 years, with a pro-rata warranty available on request. W WHY CHOOSE THE AGRI TANK The Agri Tank is a modular panel-type steel tank that bolts together for easy installation. Due to the flexibility in size the tank can adapt to the capacity that is needed. Strong wind resistance stiffeners make the tank a good investment for any farm or project. Modular flexibility Firmness of shape and mechanical strength.

Upload: others

Post on 01-Feb-2021

8 views

Category:

Documents


1 download

TRANSCRIPT

  • DID YOU KNOW?Aquadam products are manufactured by

    applying the latest techniques in structural engineering design and analysis.

    This means that when you invest in one of our products you can be sure that it’s

    designed according to a recognised code of practice so that it will be effective in any

    setting and circumstance.

    AG

    RI T

    AN

    K

    Modularflexibility

    The Agri Tank is available in capacities ranging from 15 m3 to more than 2 762 m3 and with a diameter ranging from 2,35 m to 19,66 m. Consequently, we offer a product for a wide range of specifications and requirements. Zincalume steel bolted tanks are suited to tough environments where dependability is vital. They can withstand extreme environments in any urban, rural, or remote location. The modular design principle of the tank kits offers ease of transport and assembly on site.

    The tank shellThe tank wall is constructed from 1,0 mm to 6,0 mm zincalume steel panels, a metal that will last seven times longer than galvanised steel, with a life expectancy of more than 20 years. The zinc in the coating protects the exposed steel. Panels can also be colour coated at an optional extra. By adding cathodic protection that will corrode at a far lower rate than galvanised steel, corrosion of the zincalume panels is slowed down or even stopped.

    The roof designThe tank roof is constructed using 55 mm full hard zincalume corrugated sheeting. The roof is trafficable across roof trusses, complete with a heavy-duty lockable access hatch. The roof is light and weatherproof, and designed to withstand wind speeds of up to 200 km/h. The roof can be fitted with a ventilator to prevent condensation on the inside and with an internal and external ladder for easy access. The roof can be sealed to make it bird and rodent proof.

    Potable PVC liner Aquadam uses a potable PVC (polyvinyl chloride) liner with woven base fabric polyester yarn 1100/1440 d/tex. These non-tear liners are manufactured as a heat-welded homogenous unit with welded seams of 50 mm wide.

    Anchoring of the tankTank foundations can vary depending on the size, the application and the design requirements of the tank. A reinforced concrete ring beam is required to anchor the tank, especially for larger tanks and for installations in extreme windy conditions. Aquadam gives you detailed drawing and site preparation requirements for each installation.

    Modular flexibilityThe bolted nature of the tanks makes building very quick when compared to welded or concrete structures. It also allows the existing tanks to be unbolted and moved on to new locations when needed, significantly increasing asset value. Engineered designs will accommodate secure tank storage for local environmental conditions, such as high wind speeds, snow or seismic loads. The bolted tank and silo system allows for structural designs to be used in various configurations, including water storage reservoirs, water standpipes and elevated water distribution tanks. We guarantee that the Agri Tank will not leak for 20 years, with a pro-rata warranty available on request. W

    WHY CHOOSE THE AGRI TANK

    The Agri Tank is a modular panel-type steel tank that bolts together for easy installation. Due to the flexibility in size the tank can adapt to the capacity that is needed.

    Strong wind resistance stiffeners make the tank a good investment for any farm or project.

    Modular flexibilityFirmness of shape and mechanical strength.

  • Speak to one of our water storage experts086 100 1010 • [email protected] • www.aquadam.co.za

    Aquadam Steel Tanks International is a division of Aquasteel (Pty) Ltd, and a Level 2 B-BBEE contributor in the industry.

    CAPACITIES

    CHOOSE THE CAPACITY OR SIZE FOR THE SPECIFIC APPLICATION AND AREA

    MULTIPLE APPLICATIONS• Agriculture (irrigation, drinking, stock,

    poultry, slurry tank)• Aquaculture (fish hatcheries)• Certain chemical storage• Domestic and rural water storage• Emergency relief tanks• Fire protection tanks• Industrial and mining sectors• Loose storage tanks (salt, sand)• Potable water storage• Rainwater storage tanks• Recycling grey water in industrial and

    mining sector• Safety tanks for flammable liquids• Water treatment plants• Wastewater treatment plants

    DESIGN SPECIFICATIONSDesign code Standard

    AWWA D103-97:

    (American Water Works Association) Standard for Factory Coated Bolted Steel Tanks for Water Storage.

    SANS 10160-3:

    Basis of Structural Design and Actions for Buildings and Industrial Structures – Part 3 : Wind Actions.

    SANS 282:2004:

    Edition 5.1 – Bending dimensions and scheduling of steel reinforcement for concrete.

    AS/NZS 4020:2005:Potable PVC liner: Testing of products for use in contact with drinking water.

    FEATURESManufactured to AWWA

    (American Water Works Association) Standards D103

    •Designed and approved according

    to engineers’ specifications•

    A versatile high quality and affordable panel type steel tank

    •Zincalume will last seven times longer than galvanised steel

    •Excellent fireproofing qualities

    •A modular tank that bolts together

    with a liner inside to ensure safe water storage

    •Optional zinc-aluminium steel roof

    can be added•

    Low maintenance•

    You can specify the sizes and specifications of the tank to suit the

    application•

    Capacity of existing tanks can be increased by adding additional rings

    •Life expectancy of more than 50 years

    •Pro-rata 20-year leak free warranty

    ADVANTAGESDesigned for the farm and used by

    9 out of 10 farmers•

    Only use materials suitable for steel water tanks to last a lifetime

    •Wind stiffeners make the tank stronger against high winds

    •Tanks can be relocated or increased in size with ease

    •Lightweight PVC liner developed

    specifically for the farmer and their unique applications

    2,35 m

    9,40 m

    19,66 m

    3,02 m

    15 m3(15 000 lt)

    2,762 m3(2 762 000 lt)

    https://twitter.com/Aqua_Damhttps://www.facebook.com/aquadamwaterstorageexperts/https://plus.google.com/+AquadamCoZahttps://www.youtube.com/channel/UCWlFPD4OYcqhxHnoUgfF_Twhttps://za.linkedin.com/company/aquadam-watertight-solutionstel:0861001010mailto:mailto:sales%40aquadam.co.za?subject=Agri%20tank%20enquiry%20from%20brochure