modular steelwork solutions - caddy industrial...framo: a versatile, multifunctional support system...

Modular Steelwork Solutions

At Sikla, we understand the problems you face. Budgets are exceeded, schedules often over run and we have identified the challenges facing secondary steel solutions.

• Excessive waste by modification• Weight is high, performance is poor• Logistics are outdated and inefficient• A hot works facility is required

With the experience of over 40 years in developing innovative products for above-ground industrial pipe work installation, we believe it is possible to work in a way that is more efficient and more productive for everyone involved.

With Sikla you can plan smarter through proven design and innovation, here is how:

FRAMO: A versatile, multifunctional support system that offers maximum flexibility using a compact range of off-the-shelf components used in partnership with our SIMOTEC modular pipe supports. All of our systems can be fully implemented in to the CAD process at planning stage.

SIKLA UK LimitedUnit 3 Newmarket CourtKingston IndustryMilton KeynesBuckinghamshireMK10 0AG

Tel: +44 (0)1908 281 052Fax: +44 (0)1908 220 986e-mail: [email protected]: sikla.co.uk

Sikla products offer these four key benefits:

• All parts are reusable without wastage• Strong but lightweight, cutting down the total tonnage of

steel required for the project• Our products are readily available from stock with a

distribution network that offers quick lead times• There is no need for hot works!

These benefits form the foundation of FRAMO:

Lightweight from only 4.3kg per M, offering easily adjustable connections secured with minimal assembly using a thread forming, shake proof fastening.

All Framo 80 and 100 products are fully compatible with all other Sikla system parts including our SIMOTEC pipe support range. High load bearing and height adjustable as standard with approximately 50mm of adjustability per pipe shoe.

So why use Sikla?We can support you at every stage of the project and all of our products benefit from optimal design, performance and quality. Guaranteed to save you time and reduce costs.

To see how we can benefit your project, please contact us with your requirements.

EN 1090-1 Factory Production Control

Modular Steelwork Solutions

1Sections and Welded End-Plate Beams

Sections and Welded End-Plate Beams

Framo 1-106/2

015

Beam Section TP F 80 Beam Section TP F 100 Cantilever Bracket AK F 80

Cantilever Bracket AK F80/30

Cantilever Bracket AK F 100 Beam Bracket TKO F 80

Beam Bracket TKO F 100 Beam Bracket TKO F100/160

Bracing Arm SKO F 100

Page 1-2 Page 1-3 Page 1-4



Beam Section TP F 80Group: A410

ApplicationGalvanised hollow-box-section for fabrication of steel frames. Designed for bothsimple two-dimensional supports and complex volumetric arrangements. Holesdesigned to receive Self Forming Screw FLS in conjunction with the relevantcomponent.

Technical Data

Mechanical properties shown above take into account perforations.


Framo 1-2 06/2

015

Type Weight[kg/m]

Qty.[m]

Partnumber

TP F 80 6.4 6 192539TP F 80/30 4.3 6 113407

Type Sectionmodulus

[cm3 ]

Moment ofinertia[cm4 ]

Radius ofinertia[cm]

Torsionalmoment lt

[cm 4 ]

Cross sectionA

[cm2 ]

TP F 80 Wy: 15.87Wz: 15.87

ly: 63.49lz: 63.49

iy: 2.95iz: 2.95

98.22 7.28

TP F 80/30 Wy: 8.36Wz: 4.03

ly: 33.47lz: 6.05

iy: 2.76iz: 1.17

18.66 4.37

Material: Steel, hcp

TP F 80/30

Beam Section TP F 100Group: A810

ApplicationGalvanised hollow-box-section for fabrication of steel frames. Designed for bothsimple two-dimensional supports and complex volumetric arrangements. Holesdesigned to receive Self Forming Screw FLS in conjunction with the relevantcomponent.

Technical Data

Mechanical properties shown above take into account perforations.


Framo 1-306/2

015

Type Weight[kg/m]

Qty.[m]

Partnumber

TP F 100 10.8 6 112904TP F 100/160 14.3 6 112905

Type Sectionmodulus

[cm3 ]

Moment ofinertia[cm4 ]

Radius ofinertia[cm]

Torsionalmoment lt

[cm 4 ]

Cross sectionA

[cm2 ]

TP F 100 Wy: 36.27Wz: 36.27

ly: 181.38lz: 181.38

iy: 3.90iz: 3.90

302.40 11.92

TP F100/160

Wy: 69.67Wz: 52.71

ly: 557.41lz: 263.54

iy: 6.00iz: 4.12

641.34 15.48

Material: Steel, HCP

Cantilever Bracket AK F 80Group: A420

ApplicationGalvanised hollow-box-section with welded end-plate to serve as cantileverarm. May be used as a crossbar when combined with End Support STA and 4 xSelf Forming Screw FLS.

Scope of deliveryWith pre-assembled End Cap ADK F 80

InstallationWith 4 x Self Forming Screw FLS when fixed to another Framo hollow-box-section. Alternatively with two suitable wall anchors through holes “A” whenfixed directly to building structure.

Technical Data

ApprovalsMPA tested


Framo 1-4 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

AK F 80-400 3.4 1 192764AK F 80-800 5.8 1 192771AK F 80-E-600 4.5 1 110370

Type L[mm]

Dimensions of base plate[mm]

Slots in base plate for

AK F 80-400 400 190 x 80 x 8 M10AK F 80-800 800 190 x 80 x 8 M10AK F 80-E-600 600 165 x 80 x 8 M10

Configuration: Plate welded to Beam section F 80Material:Plate Steel, hcpBeam section Steel, hcp

AK F E-600

Cantilever Bracket AK F 80/30Group: A420



Technical Data


Framo 1-506/2

015

Type W[kg]

Quantity[pack]

Partnumber

AK F 80/30-400 2.4 1 113064AK F 80/30-800 4.2 1 113065AK F 80/30-E-400 2.2 1 113625AK F 80/30-E-800 4.0 1 113626

Type L[mm]



AK F 80/30-400 400 130 x 80 x 8 M10AK F 80/30-800 800 130 x 80 x 8 M10AK F 80/30-E-400 400 80 x 80 x 8 M10AK F 80/30-E-800 800 80 x 80 x 8 M10

Configuration: Plate welded with Beam Section F 80/30Material:Plate: Steel, HCPBeam section: Steel, HCP

AK F 80/30 E

Cantilever Bracket AK F 100Group: A820



Technical Data


Framo 1-6 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

AK F 100-400 5.7 1 113068AK F 100-800 10.1 1 113069AK F 100-1200 14.7 1 113419AK F 100-E-600 7.8 1 113070

Type L[mm]


Slots in base plate for round holeA für

AK F 100-400 400 210 x 100 x 8 M10 M12AK F 100-800 800 210 x 100 x 8 M10 M12AK F 100-1200 1200 210 x 100 x 8 M10 M12AK F 100-E-600 600 210 x 100 x 8 M10 M12

Configuration: Plate welded to Beam Section F 100Material:Plate: Steel, HCPBeam section: Steel, HCP

AK F E-600

Beam Bracket TKO F 80Group: A423

ApplicationGalvanised hollow-box-section with welded end-plate to serve as cantileverarm. May be used as a crossbar when combined with End Support STA/EndSupport WBD and 4 x Self Forming Screw FLS .

Scope of deliveryWith pre-assembled End Cap ADK F 80.

InstallationDepending on the situation, different options are recommended:

Technical Data

ApprovalsMPA tested


Framo 1-706/2

015

Type W[kg]

Quantity[pack]

Partnumber

TKO F 80-400 6.6 1 192788TKO F 80-800 9.2 1 192795

a) Directly to building structure: 4 x suitable wall anchorsb) To traditional steel beams between 80 – 120 mm flange dimensions: 1x

Assembly Set P2c) To traditional steel beams > 120 flange dimension: with on-demand

Adaptor Plate (tbc)d) To Sikla Simotec steel beams 100/120: with Bracket Plates FV

100/120 when positive mechanical connection required

Type L[mm]



TKO F80-400 400 220 x 220 x 12 M12TKO F80-800 800 220 x 220 x 12 M12

Configuration Base plate welded to Beam Section F 80Material:Base plate Steel, hcpBeam section Steel, hcp

Beam Bracket TKO F 100Group: A823

ApplicationGalvanised hollow-box-section with welded end-plate to serve as cantileverarm. May be used as a crossbar when combined with End Support STA/EndSupport WBD and 4 x Self Forming Screw FLS.

Scope of deliveryWith pre-assembled End Cap ADK F100


Technical Data


Framo 1-8 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

TKO F 100-400 8.6 1 113071TKO F 100-800 12.8 1 113072TKO F 100-1200 17.5 1 113421

a) Directly to building structure: 4x suitable wall anchors.b) To traditional steel beams between 80 - 120 mm flange dimensions:

with on-demand Adaptor Plate(tbc).c) To traditional steel beams > 120 flange dimension: with on-demand


100/120 when positive mechanical connection required.

Type L[mm]



TKO F 100-400 400 220 x 220 x 12 M12TKO F 100-800 800 220 x 220 x 12 M12TKO F 100-1200 1200 220 x 220 x 12 M12

Configuration: Base plate welded to Beam Section F 100Material:Plate: Steel, HCPBeam section: Steel, HCP

Beam Bracket TKO F 100/160Group: A823

ApplicationGalvanised hollow-box-section with welded end-plate to serve as cantileverarm. May be used as a crossbar when combined with End Support STA/EndSupport WBD and 4 x Self Forming Screw FLS.

Scope of deliveryWith pre-assembled End Cap ADK F100


Technical Data


Framo 1-906/2

015

Type W[kg]

Quantity[pack]

Partnumber

TKO F 100/160-800 18.5 1 113097TKO F 100/160-1200 24.5 1 113420

a) Directly to building structure: 4x suitable wall anchors.b) To traditional steel beams between 80 - 120 mm flange dimensions:

with on-demand Adaptor Plate(tbc).c) To traditional steel beams > 120 flange dimension: with on-demand


100/120 when positive mechanical connection required.

Type L[mm]



TKO F 100/160-800 800 280 x 280 x 12 M12TKO F 100/160-1200 1200 280 x 280 x 12 M12

Configuration: Base plate welded to Beam Section F 100/160Material:base plate: Steel, HCPBeam section: Steel, HCP

Bracing Arm SKO F 100Group: A823

ApplicationBracing arm for reinforcement of frames made from Beam Section TP F100 and/or Cantilever Bracket AK F100.

Installation- With 2x4 Self Forming Screw FLS when used inside a corner of two F100 sizehollow-box sections.- With 4x Self Forming Screw FLS and 2x suitable wall anchors/fixings whenused to connect between one F 100 size hollow-box section and the building structure.

Technical Data


Framo 1-10 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

SKO F 100 5.5 1 113096

Type Assembly dimensionA

Assembly dimensionB

SKO F 100 450 710


2End Connectors and Fastening

End Connectors and Fastening

Framo 2-106/2

015

Self Forming Screw FLS End Support STA F 80/30 E End Support STA F 80

End Support STA F 100 Corner Bracket WD F 100 Beam Section Holder TPH F80

Beam Section Holder TPH F100

Joint JOI F 80 HCP End Support STA F - E 45°

Octagonal Coupling PK F 80HCP

Square Coupling PK F 80HCP




Page 2-11 Page 2-12

Self Forming Screw FLSGroup: A430

ApplicationThe Self Forming Screw FLS creates its own thread inside the wall of the Framopilot hole. During the screw-driving operation, the base steel is re-shaped andhardened to form an air-tight seal between the threads of the screw and thesurrounding steel, making it exceptionally resistant to vibrational loosening andincreasing fastening strength.

Technical Data

ApprovalsMPA tested


Framo 2-2 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

FLS F 0.03 100 192512

Application Tightening torque[Nm]

System Framo 60Connection to channels 41 35


End Support STA F 80/30 EGroup: A422

ApplicationPlug-in component designed to create an endplate at the open end of a BeamSection TP F80/30 a Cantilever bracket AK F80/30.

Installation- With 2x2 Self Forming Screws FLS when used to connect 2 Beam Sections.- With 2 Self Forming Screws FLS and 2 suitable wall anchors when used toconnect to the building structure

Technical Data


Framo 2-306/2

015

Type W[kg]

Quantity[pack]

Partnumber

STA F 80/30-E 0.6 1 113066


End Support STA F 80Group: A422

ApplicationPlug-in component designed to create an endplate at the open end of a BeamSection TP F80 or a Cantilever bracket AK F80.

InstallationDepending on the version, following mountings solutions are possible:

Technical Data

ApprovalsMPA tested


Framo 2-4 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

STA F 80 1.6 1 192856STA F 80-E 1.5 1 192863STA F 80-A 1.7 1 192870

a) With 2x4 Self Forming Screws FLS when used to connect 2 BeamSections.

b) With 4 Self Forming Screws FLS applied to the octagonal insert and 2suitable wall anchors/fixings when connected to the building structure.

Type Dimensions of Base plate [mm]


STA F 80 190 x 80 x 8 M10STA F 80-E 165 x 80 x 8 M10STA F 90-A 190 x 80 x 8 M12

Configuration: Base plate welded to octagonal element F 80Material:Plate Steel, hcpOctagonal element Steel, hcp

STA F 80

STA F 80-E

STA F 80-A

End Support STA F 100Group: A822

ApplicationPlug-in component designed to create an endplate at the open end of a BeamSection TP F 100 or a Cantilever bracket AK F 100. Variation types F 100-80 (E)are designed to combine F 100 with F 80 beam sections. Octagonal insertallows full utilisation of beam section within the space required by the EndSupport STA itself.


Technical Data


Framo 2-506/2

015

Type W[kg]

Quantity[pack]

Partnumber

STA F 100 2.4 1 113073STA F 100-E 2.2 1 113074STA F 100-80 2.0 1 113337STA F 100-80-E 1.8 1 113481

a) With 2x4 Self Forming Screws FLS when used to connect 2 BeamSections.

b) With 4 Self Forming Screws FLS applied to the octagonal insert and 2suitable wall anchors/fixings when connected to the building structure.

Type Dimensions of base plate[mm]

Slotting A in base platefor

slotting B in base platefor

STA F 100 210 x 100 x 8 M12 M10STA F 100-E 185 x 100 x 8 M10 M10STA F 100-80 210 x 100 x 8 M12 M10STA F 100-80-E 185 x 100 x 8 M10 M10

Configuration: Base plate welded to Octagon F 100 or F 80Material:Base plate: Steel, HCPOctagon: Steel, HCP

STA F 100-E

STA F 100-80

Corner Bracket WD F 100Group: A430

ApplicationComponent to be used for connections between two F100 or F100/160 sectionswhen the structural design requires an alternative to the End Support STA F 100as the default solution.

InstallationBy using 8 x Self Forming Screw FLS

Technical Data


Framo 2-6 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

WD F 100 140/140 1.9 1 113095


Beam Section Holder TPH F 80Group: A425

ApplicationInterface element to connect 90° intersecting Beam Sections F80. Alternativelythe Beam Section Holder TPH may be used to connect only one beam sectionto an even surface with suitable wall anchors or with cast-in channelaccessories.

InstallationConnecting one Beam Section F80 90° to another one by using 6 x SelfForming Screw FLS applied through all elongated holes. Connecting to anyother surface or member by using 2 x Self Forming Screws FLS through the twoelongated holes on the top of the Beam Section Holder TPH F80 plus 2appropriate fixing elements up to M12 through the two holes “d1”.

Technical Data


Framo 2-706/2

015

Type W[kg]

Quantity[pack]

Partnumber

TPH F 80 0.5 10 195765TPH F 80 C 0.8 10 111732

Type L x w x th[mm]

Ø d1[mm]

Elongated hole LL1d x a [mm]


perm. load under90°

to the beam axisFy = Fz [kN]

TPH F 80 181 x 50 x4

13 11 x 20 - 7

TPH F 80 C 199 x 80 x4

14 11 x 20 11 x 20 10

Material: Steel, hcp or hot dipped galvanised

Beam Section Holder TPH F 100Group: A825

ApplicationInterface element to connect 90° intersecting Beam Sections F100. Alternativelythe Beam Section Holder TPH may be used to connect only one beam sectionto an even surface with suitable wall anchors or with cast-in channelaccessories.

InstallationConnecting one Beam Section F100 90° to another one by using 6 x SelfForming Screw FLS applied through all elongated holes. Connecting to anyother surface or member by using 2 x Self Forming Screws FLS through the twoelongated holes on the top of the Beam Section Holder TPH F100 plus 2appropriate fixing elements up to M12 through the two holes “d1”.

Technical Data


Framo 2-8 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

TPH F 100 C 1.2 10 113084TPH F 100/80 C 1.0 10 113085

Type L x b x s[mm]

Ø d1[mm]



TPH F 100 C 219 x 100 x 4 14 11 x 20 11 x 20TPH F 100/80 C 199 x 100 x 4 14 11 x 20 11 x 20


Joint JOI F 80 HCP

ApplicationFlexible connecting element to be used for Framo F 80 Beam Sections at anangle between 0° and 160°, preferably for conjunctions of F 80 Beam Sectionsamong each other or as junction element to primary or secondary steelconstructions. Applicable as bracing element, especially for the reinforcement ofcross members.

Scope of deliveryThread connection between Mounting Plate and Adapter completely pre-assembled.

InstallationThread connection by means of 2 x 4 Self Forming Screws FLS 80.

NoticeIn case of vibration, the thread connection between Mounting Plate and Adapteradditionally has to be secured against unscrewing.

Technical Data


Framo 2-906/2

015

Type W[kg]

Quantity[pack]

Partnumber

JOI F 80 2.1 1 111448

Type permissible load F[kN]

Joi F 80 2.2

Material:Mounting Plate, Adapter, welded-on links: Steel, hcpScrew: Steel class 8.8Nut: Steel class 8

End Support STA F - E 45°Group: A422

ApplicationThe End Support STA F - E 45° is designed to generate a 45° bracing element incombination with F80 beam sections or F80 Cantilever Brackets.

InstallationDepending on the situation on site there are two options to use this product:

Technical Data


Framo 2-10 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

STA F 80 - E 45° 1.95 1 406001STA F 100-80 - E 45° 2.35 1 406002

a) Connection within the Framo system by connecting with 4 FLS screwsto each beam section F80.

b) Connection to building fabric by using 2 suitable wall anchors indiagonal configuration.

Type Dimensions of Base plate [mm]


permissible tension

permissilble compression

STA F 80 - E 45° 190 x 80 x 8 M10 9 kN 15 kNSTA F 100 - E 45° 210 x 100 x 8 M10 9 kN 15 kN

Configuration: Base plate welded to octagonal element F 80Material:Plate: Steel, hcpOctagonal element: Steel, hcp

Octagonal Coupling PK F 80 HCP

ApplicationInternal splice connecting element for TP F 80 Beam Section, particularlysuitable for vertical extension. Should the component be used for horizontalapplication, the bending moment needs to be considered.This particular connection element allows rotation of the Framo TP F 80 BeamSection by 45°.

InstallationTo be fastened with 2 x 4 FLS F Self Forming Screws. For optimal bendingmoment, distance between screws to be as far from each other as possible.

Notice:Self Forming Screw FLS F to be fastened on two sides with a distance ofminimum of 50 mm and to be fastened symmetrically.To optimise the bending moment the FLS F should be installed to maintain thepipe weight of the effective flow - i.e. Screws are located top and bottom forhorizontal cross bars not sideways.

Technical Data


Framo 2-1106/2

015

Type W[kg]

Quantity[pack]

Partnumber

PK F 80 8kt - 280 1.4 1 111446

Type adm. longitudinal force (tension/pressure) F

[kN]

adm. bending moement Mb

[Nm]

PK F 80 8kt - 280 10,0 250


Square Coupling PK F 80 HCP

ApplicationInternal splice connecting element for TP F 80 Beam Section, particularlysuitable for vertical extension. Should the component be used for horizontalapplication, the bending moment needs to be considered.

InstallationTo be fastened with 2 x 4 FLS F Self Forming Screws. For optimal bendingmoment, distance between screws to be as far from each other as possible.

Notice:Self Forming Screw FLS F to be fastened on two sides with a distance ofminimum of 100mm and to be fastened symmetrically.To optimise the bending moment the FLS F should be installed to maintain thepipe weight of the effective flow - i.e. Screws are located top and bottom forhorizontal cross bars not sideways.

Technical Data


Framo 2-12 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

PK F 80 4kt - 360 2.1 1 111445

Type adm. longitudinal force (tension/pressure) F

[kN]

adm. bending moment Mb

[Nm]

PK F 80 4kt - 360 10.0 500


3Fastening to Concrete and Steel

Fastening to Concrete and Steel

Framo 3-106/2

015

Assembly Set PS Joining Plate AP End Support WBD F 80

End Support WBD F 100 End Support WBD F 100/160 Welding Adapter ASA F 80Octagon

Welding Adapter ASA F 100Octagon

Welding Adapter ASA F 80Square

Welding Apater ASA F 100Square

U-Holder SB F 80 U-Holder SB F 100 Insulated Foot Plate SHB F80





Assembly Set PSGroup: A640

ApplicationElement for connecting Beam Bracket TKO, Angled Beam Bracket SKO or EndSupport WBD to a beam section.

Scope of delivery

Installation The narrow ends of the Beam Clips must be fixed to the beam flange. Max. perm. torque of all M12 bolts: 85 Nm (Set P2 S) Max. perm. torque of all M16 bolts: 150 Nm (Set P3 S) Once fully tightened, the hexagon bolts must not be re-used!

Technical Data


Framo 3-2 06/2

015

Type W[kg]

Qty.[set]

Partnumber

Set P2 S 1.6 1 168494Set P3 S 2.0 1 179147Set P2/2 S 0.6 1 183800

Type Beam Clip[Qty.]

Hexagon bolt 8.8[Qty.]

Washer[Qty.]

Hexagon nut[Qty.]

Set P2 S 4 x P2 4 x M12 x 80 8 x 12/40 4 x M12Set P3 S 4 x P3 4 x M16 x 100 8 x 16/125 4 x M16Set P2/2 S 2 x P2 2 x M12 x 80 4 x 12/40 2 x M12

Material: Steel and cast iron, hcp

1 set is required

1 set P2/2 is required

Joining Plate APGroup: A630

ApplicationInterface element to enable the connection of standard endplates of BeamBrackets TKO F80 or F100, TKO 100 or 120 to primary steel with flange width>120 mm. Alternatively this product may be used to achieve a greater distancebetween wall anchor positions when required by the anchor calculation’s result.

Scope of deliveryAdapter Plate AP4 Countersink Screws M12 x 40 4 Hexagon Nuts M124 Washers

InstallationConnect the Adapter Plate AP to the Beam Bracket TKO’s end plate by usingthe accessories above. Then continue with either heavy-duty anchors orAssembly Set P/Beam Clips as required by the building structure.

Technical Data


Framo 3-306/2

015

Type W[kg]

Quantity[pack]

Partnumber

AP 121/160 7.9 1 183953AP 161/200 9.3 1 183962AP 201/300 8.5 1 183980AP 301/310 9.8 1 113129

Type Dimension of Base PlateL x B [mm]

Perforation for Connection to flange width[mm]

AP 121/160 320 x 260 x 12 M12 121 - 160AP 161/200 320 x 310 x 12 M16 161 - 200AP 201/300 420 x 220 x 12 M16 201 - 300AP 301/310 440 x 220 x 12 M16 301 - 310

Material:Joining Plate Steel, hot-dipped galvanisedBolts Steel DIN 7991, class 8.8, Dacromet/delta sealNuts Steel, class 8, hot-dipped galvanisedWashers Steel, hot-dipped galvanised

End Support WBD F 80Group: A421

ApplicationPlug-in component designed to create a square endplate at the open end of aBeam Section TP F80 or a Beam Bracket/Cantilever bracket AK F80. Variation“T” with octagonal insert allows full utilisation of beam section within the spacerequired by the End Support WBD itself.


Technical Data

ApprovalsMPA tested


Framo 3-4 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

WBD F 80-80/120 5.2 1 192801WBD F 80-121/160 8.7 1 192818WBD F 80-161/200 10.2 1 192825WBD F 80-201/300 9.4 1 192832WBD F 80-T 4.8 1 192849

a) Directly to building structure: 4 x suitable wall anchors and 4 SelfForming Screws FLS applied to the square/octagonal insert

b) To traditional steel beams between 80 – 300 mm flange dimensions: 1xAssembly Set P2/P3 and 4 Self Forming Screws FLS applied to thesquare/octagonal insert

c) To traditional steel beams > 120 flange dimension: with on-demandAdaptor Plate (tbc)

c) To Sikla Simotec steel beams 100/120: with Bracket Plates FV100/120 when positive mechanical connection required

Type for flange width[mm]



WBD F 80-80/120 80 - 120 220 x 220 x 12 M12WBD F 80-121/160 121 - 160 320 x 260 x 12 M12WBD F 80-161/200 161 - 200 320 x 310 x 12 M16WBD F 80-201/300 201 - 300 420 x 220 x 12 M16WBD F 80-T 80 - 120 220 x 220 x 12 M12

Configuration: Base plate welded to square F 80 resp. octagonalelement F 80

Material:Plate Steel, hcpSquare F 80 Steel, hcpOctagonal element F 80 Steel, hcp

WBD T

End Support WBD F 100Group: A821

ApplicationPlug-in component designed to create a square endplate at the open end of aBeam Section TP F 100 or a Beam Bracket/Cantilever bracket AK F 100.Variation “T” with octagonal insert allows full utilisation of beam section withinthe space required by the End Support WBD itself.


Technical Data


Framo 3-506/2

015

Type W[kg]

Quantity[pack]

Partnumber

WBD F 100-80/120 6.1 1 113075WBD F 100-121/160 9.7 1 113076WBD F 100-161/200 11.2 1 113077WBD F 100-201/300 10.3 1 113078WBD F 100-T 5.3 1 113079

a) Directly to building structure: 4 x suitable wall anchors and 4 SelfForming Screws FLS applied to the square/octagonal insert

b) To traditional steel beams between 80 – 300 mm flange dimensions: 1xAssembly Set P2/P3 and 4 Self Forming Screws FLS applied to thesquare/octagonal insert

c) To traditional steel beams > 120 flange dimension: with on-demandAdaptor Plate (tbc)

d) To Sikla Simotec steel beams 100/120: with Bracket Plates FV100/120 when positive mechanical connection required




WBD F 100-80/120 80 - 120 220 x 220 x 12 M12WBD F 100-121/160 121 - 160 320 x 260 x 12 M12WBD F 100-161/200 161 - 200 320 x 310 x 12 M16WBD F 100-201/300 201 - 300 420 x 220 x 12 M16WBD F 100-T 80 - 120 220 x 220 x 12 M12

Configuration: Base plate welded to square resp. octagonalelement

Material:Base plate: Steel, HCPSquare F 100: Steel, HCPOctagonal element F 100: Steel, HCP

WBD T

End Support WBD F 100/160Group: A821

ApplicationPlug-in component designed to create a square endplate at the open end of aBeam Section TP F100 or a Beam Bracket.


Technical Data


Framo 3-6 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

WBD F100/160-121/160 10.53 1 113098WBD F100/160-161/200 11.14 1 113099WBD F100/160-201/300 11.95 1 113100

a) Directly to building structure: 4 x suitable wall anchors and 4 SelfForming Screws FLS applied to the square/octagonal insert.

b) To traditional steel beams between 80 – 300 mm flange dimensions: 1xAssembly Set P2/P3 and 4 Self Forming Screws FLS applied to thesquare/octagonal insert.

c) To traditional steel beams > 120 flange dimension: with on-demandAdaptor Plate (tbc).

d) To Sikla Simotec steel beams 100/120: with Bracket Plates FV100/120 when positive mechanical connection required.




WBD F 100/160-121/160 121 - 160 320 x 260 x 12 M12WBD F 100/160-161/200 161 - 200 320 x 310 x 12 M16WBD F 100/160-201/300 201 - 300 420 x 220 x 12 M16

Configuration: Base plate welded to square F 100/60Material:Plate: Steel, hcpSquare F 100: Steel, hcp

Welding Adapter ASA F 80 OctagonGroup: A428

ApplicationWelding plate with octagonal insert to receive Framo section. May beimplemented into the structural steel design in anticipation of Framo-frames orused in situ as a connection element when clamping is not an option but hotworks are permitted. The octagonal insert allows for full utilisation of beamsection within the space required by the Welding Adapter ASA itself.

Scope of deliveryMounting Plate 100 with welded on octagonal joint

InstallationThe welding plate of the ASA can be welded directly without previous treatmentdue to a corrosion-resistant weld-thru coating which is compatible with both theHDG surface of the Framo section and the health and safety requirements of thewelding process. Once the ASA adapter has been connected, the coating mayalso receive paint without previous treatment. The Framo section must beconnected to the Welding Adapter ASA with 4 x Self Forming Screw FLS.

Technical Data


Framo 3-706/2

015

Type W[kg]

Quantity[pack]

Partnumber

ASA F 80 GPL 8kt 2.2 1 112212

Type Adapter sizeH [mm]

Mounting Plate size[mm]

ASA F 80 GPL 8kt 140 100 x 100 x 20

Adm. load cantilever: max. 0.6 kNmMaterial: Steel, HCP

Welding Adapter ASA F 100 OctagonGroup: A828

ApplicationWelding plate with octagonal insert to receive Framo section. May beimplemented into the structural steel design in anticipation of Framo-frames orused in situ as a connection element when clamping is not an option but hotworks are permitted. The octagonal insert allows for full utilisation of beamsection within the space required by the Welding Adapter ASA itself.

Scope of deliveryMounting Plate 100 with welded on octagonal joint.


Technical Data


Framo 3-8 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

ASA F 100 GPL 8kt 2.1 1 113080



ASA F 100 GPL 8kt 200 120 x 120 x 20


Welding Adapter ASA F 80 SquareGroup: A428

ApplicationWelding plate with square insert to receive Framo section. May be implementedinto the structural steel design in anticipation of Framo-frames or used in situ asa connection element when clamping is not an option but hot works arepermitted.


Technical Data


Framo 3-906/2

015

Type W[kg]

Quantity[pack]

Partnumber

ASA F 80 1.0 1 110020

Adm. load:Cantilever: max. 1.0 kNmCrossbar: see Framo Installation Guidelines


Welding Apater ASA F 100 SquareGroup: A828

ApplicationWelding plate with square insert to receive Framo section. May be implementedinto the structural steel design in anticipation of Framo-frames or used in situ asa connection element when clamping is not an option but hot works arepermitted.

Scope of deliveryMounting Plate 100 with welded on square joint.


Technical Data


Framo 3-10 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

ASA F 100 GPL 4kt 4.4 1 113339ASA F 100/160 GPL 4kt 6.5 1 113410



ASA F 100 GPL 4kt 240 120 x 120 x 20ASA F 100/160 GPL 4kt 240 180 x 120 x 20


U-Holder SB F 80Group: A439

ApplicationPre-assembled component to clamp Beam Section F80 to the flange side oftraditional steel sections.

Scope of deliveryType SB F 80-16:Holder with thread M10Plate2 Hexagon nuts M102 Washers

Type SB F 80-40:Holder with thread M12Plate2 Beam Clips P22 Hexagon nuts M122 Washers

InstallationU-holder to be used in pairs.Type 16 up to flange thickness 16 mmType 40 up to flange thickness 40 mm

Technical Data


Framo 3-1106/2

015

Type W[kg]

Quantity[pack]

Partnumber

SB F 80-16 0.6 20 192683SB F 80-40 1.5 10 194010

Type Thread max. adm. tensile load Tightening torque

SB F 80-16 M10 5.0 kN per U-bolt 30 NmSB F 80-40 M12 5.0 kN per U-bolt 40 Nm

Material:U-Holder Steel, hcpPlate Steel, hcpBeam clip Steel resp. Cast Iron, hcpNut/Washer Steel, hcp

SB F 80-16

SB F 80-40

U-Holder SB F 100Group: A839

ApplicationPre-assembled component to clamp Beam Section F100 to the flange side oftraditional steel sections.

Scope of deliveryType SB F 100-16:Holder with thread M10Plate2 Hexagon nuts M102 Washers

Type SB F 100-40 and 100/160-40Holder with thread M12Plate2 Beam Clips P22 Hexagon nuts M122 Washers

InstallationU-Holder to be used in pairs.Type 16 up to flange thickness 16 mmType 40 up to flange thickness 40 mm

Technical Data


Framo 3-12 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

SB F 100-16 0.7 20 113082SB F 100-40 1.6 10 113083SB F 100/160-40 1.7 10 113101

Material:U-Holder: Steel, hcpPlate: Steel, hcpBeam Clip Steel resp. Cast iron, hcphex-nut/washer: Steel, hcp

SB F 100-16

SB F 100-40, 100/160-40

Insulated Foot Plate SHB F 80Group: A421

ApplicationIntegrated footplate and permeable rubber compound mat to provide a solutionfor the support of building services, without the need for penetrative supports.In combination with the Sikla Framo TP F 80 section, any frame structure maybe built up from the footplates.Especially suitable for maintaining the thermal and waterproofing integrity of aroof or basement floor as no penetrative fixings are required to secure thefootplates for service supports.

InstallationAssembly to beam section F 80 by means of 4 self forming screws FLS F.

Technical Data


Framo 3-1306/2

015

Type Platedimensions [mm]

W[kg]

Quantity[pack]

Partnumber

SHB F 80-220 220 x 220 5.7 1 198926SHB F 80-300 300 x 300 5.4 1 113121SHB F 80-450 450 x 450 12.4 1 113122SHB F 80-600 600 x 600 27.2 1 113123

statical E-module: according toDIN 53513

0.8 - 0.9 N/mm2

dynamical E-module: according toDIN 53513

0,6 - 2.2 N/mm2

Compression set: DIN 53572 approx. 4.0 % measured 30 min. after release at 50 % compression /23°C after 72 Std.

Tensile strength: DIN 53571 0.40 N/mm2 min.Ultimate elongation: DIN 53571 70 % minimum valueTear strength: DIN 53515 3.4 N/mm2 minimum valueFire resistance: DIN 4102 B2

Material: steel, HCP, rubber-compound material

SHB F 80-220

SHB F 80-300 - 600

4Section Attachment Accessories

Section Attachment Accessories

Framo 4-106/2

015

End Cap ADK F 80 End Cap ADK F 100 41/41 Channel Adapter SA F80

41/41 Channel Adapter SA F100

U Bolt Docking Bracket F Pad U-UB F

Mounting Plate GPL F Guiding Bracket FW F Fixed Point Bracket XW F

Welding Plate SPL




Page 4-9

End Cap ADK F 80Group: A430

ApplicationPlastic end cap to close cut ends of Beam Section F80 to meet both visual andhealth & safety requirements. Standard Cantilever- and Beam Brackets (AK F80and TKO F80) already include this end cap.

InstallationMallet required.

Technical Data


Framo 4-2 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

ADK F 80 0.03 25 192674ADK F 80/30 0.02 25 113067

Material: PE, yellow

ADK F 80/30

End Cap ADK F 100Group: A430

ApplicationPlastic end cap to close cut ends of Beam Section F100 to meet both visual andhealth & safety requirements. Standard Cantilever- and Beam Brackets (AKF100 and TKO F100) already include this end cap.

InstallationMallet required.

Technical Data


Framo 4-306/2

015

Type W[kg]

Quantity[pack]

Partnumber

ADK F 100 0.05 25 113086ADK F 100/160 0.08 25 113102

Material: PE, colour yellow

ADK F 100/160

41/41 Channel Adapter SA F 80Group: A427

ApplicationInterface element to enable a stiff and solid connection between the Framoprofile and strut channel of the international 41/41 mm standard. The 41/41Channel Adapter SA F80 is equipped with automatically locking spring nutswhich means that no accessories from the strut channel’s range are required inorder to make the connection.

InstallationThe 41/41 Channel Adapter requires 4 x Self Forming Screw FLS in order to beconnected to the Framo profile. The strut channel must be inserted with the slotfirst whilst pressing the two bolt’s heads triggering an automatic 90°-lockingoperation of the two channel spring nuts. The strut channel is now securely heldand can be adjusted. Finally the two screws must be tightened with theappropriate torque for the strut channel used.

Technical Data

#tabelle_t Material: steel, HCP


Framo 4-4 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

SA F 80-41 1.4 1 192887

Type Dimension of base plate[mm]

Slots in base plate

SA F 80-41 190 x 80 x 8 M10

41/41 Channel Adapter SA F 100Group: A827

ApplicationInterface element to enable a stiff and solid connection between the Framoprofile and strut channel of the international 41/41 mm standard. The 41/41Channel Adapter SA F100 is equipped with automatically locking spring nutswhich means that no accessories from the strut channel’s range are required inorder to make the connection.

InstallationThe Channel Adapter SA F100-41 requires 4 x Self Forming Screw FLS in orderto be connected to the Framo profile. The strut channel must be inserted withthe slot first whilst pressing the two bolt’s heads triggering an automatic 90°-locking operation of the two channel spring nuts. The strut channel is nowsecurely held and can be adjusted. Finally the two screws must be tightenedwith the appropriate torque for the strut channel used.

Technical Data

#tabelle_tMaterial: steel, HCP


Framo 4-506/2

015

Type W[kg]

Quantity[pack]

Partnumber

SA F 100-41 1.8 1 113081

Type Dimension of base plate[mm]

Slots in base plate

SA F 100-41 190 x 80 x 8 M10

U Bolt Docking Bracket FGroup: A430

ApplicationDocking bracket to connect standard U-Bolts required for pipework to thesupporting Beam Sections, Cantilever Brackets and Beam Brackets F80 orF100.

Scope of deliveryFor U-bolts ≥ 4" always 2 U-bolt fastenings F are needed.

Technical Data

Pad U-UB FGroup: A430

ApplicationInsulation and surface protection pad to be used on demand when a pipes’expansion and contraction occurs directly on the F80 section.

Technical Data


Framo 4-6 06/2

015

Type B [mm]

W[kg]

Quantity[pack]

Partnumber

UB F 1/2" - 1 1/2" 85 0.13 25 192931UB F 2" - 3" 165 0.64 10 196212UB F 4" - 6" 45 0.18 20 113124UB F 8" - 12" 45 0.15 20 113125UB F 378 - 530 45 0.15 20 113126

Type W[kg]

Quantity[pack]

Partnumber

U-UB F 80 0.01 50 198797U-UB F 100 0.01 50 113094

Material: Steel, HCP or hot-dipped galvanised

Material: Polyamide PA 6.0Range of temperature: -20° up to +130° C

Mounting Plate GPL FGroup: A438

ApplicationInterface component to connect threaded bar and threaded tube to BeamSection F 80 or F 100.

InstallationRequires 2 x Self Forming Screw FLS per Mounting Plate GPL.

Technical Data


Framo 4-706/2

015

Type W[kg]

Quantity[pack]

Partnumber

GPL F 80-1/2" 0.1 50 192900GPL F 80-M10 0.1 50 113004GPL F 80-M12 0.1 50 112911GPL F 80-M16 0.2 50 195833

GPL F 100-1/2" 0.2 50 113089GPL F 100-M10 0.2 50 113338GPL F 100-M12 0.2 50 113646GPL F 100-M16 0.2 50 113090

Dimensions of base plate GPL F 80: 80 x 50 x 4 mmDimensions of base plate GPL F 100: 100 x 50 x 4 mmMaterial: Steel, hot-dipped galvanised

1/2"

Guiding Bracket FW FGroup: A705

ApplicationElement for modification of Simotec Pipe Shoes to Guided Pipe Shoes.

InstallationConnection to Beam Section F 80 or F 100 by means of 4 Self-Forming ScrewsFLS F.

Technical Data


Framo 4-8 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

FW F 80 0.6 1 110349FW F 100 0.7 1 113088

Material: Steel, hot-dipped galvanised

Welding Plate SPLGroup: A430

Application

Interface elements to connect welding lugs of engineered primary pipe supportssuch as Rod Hangers, Constant- and Variable Hangers & Supports to BeamSections TP F, Cantilever Brackets AK F and Beam Brackets TKO F. Outsidethe Framo system type “Universal" may be used to connect to I-beams up to aflange width of 300mm. The HCP-coating is welding-compatible.

Scope of delivery

Installation

Depending on the type, different installation methods are recommended:

Technical Data


Framo 4-906/2

015

Type W[kg]

Quantity[pack]

Partnumber

SPL F 80 0.5 1 113831SPL F 100 1.0 1 113635SPL universal 11.9 1 113636

a) SPL F 80 and F 100 with 4 x Self Forming Screw FLSb) SPL Universal with 4 Flange Screws SCR FLA TT M10 x 25 (item code

110503)c) SPL Universal with Assembly Set PS (M12) to flanges of existing steel

between 100 - 300 mm.

Typ Anbindefläche[mm]

Maße der Grundplatte[mm]

SPL F 80 70 x 20 110 x 80 x 8SPL F 100 80 x 80 180 x 90 x 8SPL universal 220 x 220 370 x 370 x 12

Material: Stahl, HCP

Fixed Point Bracket XW F

ApplicationElement for modification of Simotec Pipe Shoes to Fixed Point Pipe Shoes.

InstallationThe slide plate of the Pipe Shoe is disassembled. Connection to the BeamSection F 80 or F 100 by means of 4 Self-forming screws FLS F.

Technical Data

Approvals


Framo 4-10 06/2

015

Type W[kg]

Quantity[pack]

Partnumber

XW F 80 1.3 1 110356XW F 100 1.6 1 113087


modular steelwork solutions - caddy industrial...framo: a versatile, multifunctional support system...

Documents