module 3. hand safety injuries to hands and fingers are typically the most frequent injury we have....
TRANSCRIPT
MODULE 3MODULE 3
Hand SafetyHand Safety
Hand SafetyHand Safety
Injuries to hands and fingers are typically the most frequent injury we have.•Most of the work we do is done with our hands. It stands to reason that they would be the most frequently injured body part.
Hand SafetyHand Safety
• Use the right tool for the job.– Use gloves when appropriate.– Never use defective or damaged tools.– Use a tool for its intended purpose.– When utilizing a knife, always cut away from your
body.
Hand SafetyHand Safety
• Causes of hand injuries:– Faulty hand tools– Wrong PPE– Guards out of place– Sharps in trash (Glass, needles, etc.)– Pinch points– Handling of abrasive materials
Hand SafetyHand Safety
• Cutting tools– Pocket Knives– Machetes– Bush Knives– Hatchets
• Safety precautions– Keep tool sharp– Cut away from yourself
First Aid and Bloodborne First Aid and Bloodborne PathogensPathogens
First Aid and Bloodborne PathogensFirst Aid and Bloodborne Pathogens
• As an employee, it is important to have a working knowledge of First Aid/CPR practices, by attending a Instructor lead First Aid/ CPR training session.
• The best time to understand your role is before an emergency happens.
First Aid and Bloodborne PathogensFirst Aid and Bloodborne Pathogens
• Have emergency contacts list available.• Know who is trained in first aid.• Know where the first aid supplies are located• Know where the Automated External
Defibrillators (AED) are located.
First Aid and Bloodborne PathogensFirst Aid and Bloodborne Pathogens
Responding•It is important to understand that you should only respond to the level of training you have received.•Report all incidents or exposure to your supervisor immediately.
First Aid and Bloodborne PathogensFirst Aid and Bloodborne Pathogens
• Bloodborne pathogens are micro-organisms such as viruses or bacteria that are carried in blood and can cause disease in people.
First Aid and Bloodborne PathogensFirst Aid and Bloodborne Pathogens
Universal Precautions•Everyone should be considered a possible carrier of bloodborne pathogens.•Avoiding contact with patients’ bodily fluids by means of the wearing proper PPE such as medical gloves, goggles, and face shields found in first aid kit.
First Aid and Bloodborne PathogensFirst Aid and Bloodborne Pathogens
• Carefully cover the spill with paper towels or rags.
• Gently pour 10% solution of bleach over the towels or rags.
• Let sit for 10 minutes.• Wear gloves to collect & dispose of waste.
First Aid and Bloodborne PathogensFirst Aid and Bloodborne Pathogens
• Remove PPE and clothing that is contaminated with bodily fluids as soon as possible.
• Use Universal Precautions when handling contaminated items.
• Place contaminated PPE and clothing in approved & labeled bags or containers.
First Aid and Bloodborne PathogensFirst Aid and Bloodborne Pathogens
• Wash hands and exposed areas after removing PPE.
• Use non-abrasive, antibacterial soap and water.
• Flush mouth, nose, eyes for 15 minutes if blood is splashed in mucous membranes.
• Request blood testing if exposed.
First Aid-Thermal StressFirst Aid-Thermal Stress
Thermal Stress•Employees need to look for signs and symptoms of both heat and cold stress.– Heat Stress– Heat Exhaustion– Hypothermia– Frostbite
First Aid- Thermal StressFirst Aid- Thermal Stress
Heat Stress•Symptoms of heat stress can include:– Heavy sweating– Nausea– Headache– Fatigue– Vomiting– Fast pulse
First Aid- Thermal StressFirst Aid- Thermal Stress
Heat Stress•Treatment of heat stress:– Move the victim to a cooler area and cool with wet
towels.– Give cool fluids only if conscious.– Follow up with a medical examination.
First Aid- Thermal StressFirst Aid- Thermal Stress
Heat Exhaustion•Symptoms of heat exhaustion can include:– High temperature– Dry skin– Rapid breathing– Nausea/vomiting– Confusion – Seizures
First Aid- Thermal StressFirst Aid- Thermal Stress
Heat Exhaustion•Treatment of heat exhaustion:– Move the victim to a cooler area and cool with wet
towels.– Give cool fluids only if conscious.– Follow up with a medical examination.
First Aid- Thermal StressFirst Aid- Thermal Stress
Hypothermia•The entire body cools because its ability to keep warm starts to fail.•Symptoms of hypothermia can include:– Shivering– Numbness– Glassy stare– Fatigue– Loss of judgment
First Aid- Thermal StressFirst Aid- Thermal Stress
Hypothermia•Treatment of hypothermia:– Move the victim to a warm place and remove any
wet clothing.– Keep the victim warm and dry.– Seek medical attention.
First Aid- Thermal StressFirst Aid- Thermal Stress
Frostbite•Any part of the body freezes due to exposure to the cold.•Symptoms of frostbite can include:– Lack of feeling in affected area– Skin appears waxy and cold– Discolored skin
First Aid- Thermal StressFirst Aid- Thermal Stress
Frostbite•Treatment of frostbite:– Move the victim to a warm place and use warm
water until normal skin color returns.– Never rub the affected area.– Keep the victim warm and dry.– Seek medical attention.
PermittingPermitting
PermittingPermitting
• Permitting is a way to ensure the safety of you, co-workers and contractors while on the job site.
• It is important to understand:– Where permits are required – What must be permitted– When to use a permit
PermittingPermitting
• All permits must be written and kept in a location designated by the company.
• Permits are:– Job specific– Site specific– Time specific
• All permits must describe the location of the job task and the personnel involved.
PermittingPermitting
• All permits must identify all operation associated with the task including:– Operations– Precautions– Special situations related to operation and
precautions
PermittingPermitting
• All permits must:– Identify the hazards and controls for the job task.– Outline Stop Work Authority.– Service authorization and posting.
PermittingPermitting
Examples of work permits;– Permit to work– Confined Space– Hot Work– Lockout/Tagout (LOTO)– Barricading– Utility hookup
Roles and responsibilities
– Authorizing person• Authorizes permitted
work
– Safety person• Monitors work
– Managers• Ensure permits are
issued• Monitor work permit
program
– Supervisors and leads• Ensure training and
conditions are met
– Workers• Work in accordance
with permit conditions
PermittingPermitting
Confined SpaceConfined Space
Confined SpaceConfined Space
• Personnel are to be aware of a confined space area and are not to enter at any time.
• Notify your supervisor immediately where a hazard
exists & entry must be made.
• Properly trained personnel will be called to conduct the confined space entry.
Confined SpaceConfined Space
• A confined space is:– Large enough for personnel to enter.– Has limited or restricted means of entry or exit.– Is not designed for continuous occupancy.
Confined SpaceConfined Space
• A NON-PERMIT required confined space is one that has no known or potential hazards.
• If conditions develop at any time that would create hazards, all entrants must exit the space and it must be reevaluated.
Confined SpaceConfined Space
• A PERMIT REQUIRED confined space has one or more of the following:– hazardous atmosphere.– engulfing an entrant.– internal configuration– other recognized serious safety or health hazard.
Hazards That May Exist
• Chemical hazards – H2S and toxic vapors
• Fire – flammable vapors
• Noise• Temperatures• Radioactive (NORM)
• Electrocution• Falls• Caving – resulting in
suffocation• Heat stress• Oxygen deficiency• Other hazards
Confined SpaceConfined Space
Confined Space TrainingConfined Space Training
• All workers involved• Training takes place– Before assignments– If changes occur– Deviations in workers competency
Confined Space TrainingConfined Space Training
• Four levels of training– Entrant– Attendant– Supervisor– Rescuer/rescue team
• All personnel must be trained to the appropriate levels for the task they will be performing.
• This class does not meet the requirements for any of these roles.
Confined SpaceConfined Space
• Confined Space Examples– Cellars
– Vessels
– Bell holes
– Ditches
– Oil storage tanks
– Pits
– Frac tanks
– Vacuum trucks
– Sump
MODULE 3MODULE 3REVIEWREVIEW