mohd. yusri b. mohamed yunus - structure test lab.pdf · yusri b. mohamed yunus senior assistant...
TRANSCRIPT
MOHD. YUSRI B. MOHAMED YUNUSSENIOR ASSISTANT [email protected]
The lab is used as classroom for certain courses:
• Architecture - Subject related to structure and building construction (AAR 2198 &
AAR 2181)
• Quantity Surveying - Related to structure, building construction, civil engineering
construction and studio (AQS 1180, AQS 1280 AQS 1160, AQS 1191 AQS 2291,
AQS 3192 & AQS 4192)
• Landscape Architecture - Construction( ALA 3180)
• Applied Arts and Design - Technology, Design and Conservation ( AAD 3200,AAD
1100,AAD 2231)
Monday to Thursday
8.00am – 1.00pm
2.00pm – 5.00pm
Friday
8.00am – 12.15pm
2.45pm – 5.00pm
Non-working hours
Kindly contact person in charge
Equipment Purpose
Magnum Testing
Frame – 1 nos
Includes a 1.8m x 1.3m plain
triangulated frame of welded
steel hollow square section
members on which loads may be
applied and deflections
measured. The experiment calls
for joint deflections to be
measured during testing using
the HPM20 dial gauges and
holder
Micro Cover Meter –1 nos
Micro Cover Meter provides
rebar location, sizing and cover
measurement in a single
weather-resistance instrument.
Fast, accurate measurement of
concrete covers
Equipment Purpose
Standing Drill – 1
nos
A standing drill is a tool fitted with a cutting
tool attachment or driving tool attachment,
usually a drill bit or driver bit, used
for boring holes in various materials
or fastening various materials together. The
attachment is gripped by a chuck at one end
of the drill and rotated while pressed against
the target material. The tip, and sometimes
edges, of the cutting tool does the work of
cutting into the target material.
Husqvarna Chain
Saw ( 18 “ ) – 1 nos
A chainsaw is a portable,
mechanical saw which cuts with a set of teeth
attached to a rotating chain that runs along a
guide bar. It is used in activities such as
tree felling, limning, bucking, pruning,
cutting firebreaks in wildland fire
suppression and harvesting of firewood.
Equipment Purpose
Circular saw – 1 nos A circular saw is a power-saw using a toothed
or abrasive disc or blade to cut different
materials using a rotary motion spinning
around an arbor.