monarch cat 2013 - final rev g 06-19-2013 small file sz

www.monarchmetal .com

Trusted by Customers

around the world since 1989

Monarch Metal Fabrication

1625 Sycamore Ave

Bohemia, New York 11716

United States of America

(631) 563-8967

(631) 563-8976

7* [email protected]

www.monarchmetal.com

Monarch Z Clips: Original, Stainless Steel, Custom .……...........………… 05

Architectural Metals ……………….….........................................................………... 11

• Angle: Aluminum, Stainless Steel, Steel ...............………................…. 12

• Anodized Aluminum : Angle, Structural Shapes …......................... 19

• Channel : Aluminum, Stainless Steel, Steel ......................................19B

• Flat Bar: Aluminum, Stainless Steel and Brass ………...........…........ 24

• Diamond-Tread Plates ............................................................................. 29

• Other Structurals: T Bar, Zees ……………………..................................….. 31

Standoffs .................……….................................................…................................. .35

Corner Guards & Kick Plates .…………….………………............................……….. 41

CATEGORY

Overview .................................................... 06

Standard Monarch Clips ....................... 07

Speciality Monarch Clips ...................... 09

Stainless Steel Monarch Clips ............ 10

MONARCHZ CLIPS

• More sizes at www.monarchmetal.com • Call to Order 631-563-896706

MONARCH Z CLIPSOverview

Monarch Metal has provided

the fastest and easiest method

to mount wall panels, signs,

art work and more for

close to 25 years.

The key advantages ofthe Monarch Z Clip system are:

• Simplicity of installation

• Strength and security of the mounting

• No visible screws or nails on the surface of the mounted panel

MONARCH Z CLIPSStandard Z Clips

• More sizes at www.monarchmetal.com • Call to Order 631-563-8967 07

For a typical 8’ high x 4’ wide panel, customers mount the continuous lengths along the wall at 3 different heights paral-lel with the floor. These are secured to studs at 16” on center or to blocking at 8” on center. The shorter panel clips are secured to the back of the panel every 12-15” horizontally.

To match fastener locations on the panel with those on the wall a single template can be used or one can use a story pole.

Installation of the panel is accomplished by simply dropping the panel onto the continuous lengths mounted along the wall.

For a video of an installation, please visit our web-site at MonarchMetal.com

Monarch recommends a #8 Pan Head thread screw for attaching the shorter panel clips to the back side of MDF or particle board panels, and stocks these in 1/2”, 5/8” and 3/4” lengths.

The important constraint to remember for using the Monarch Z Clip system is that the height of the head of the screw must be less than .125” for our standard Monarch Z Clips.

2 E

QU

AL

DIM

DIM 4”

plus

DIM

any

1 7/8”

.125”

4”

dim


MONARCH Z CLIPSStandard Z Clips

MF625 - 5/8” Lift O� Clip

MF375 - 3/8” Lift O� Clip

Available size:• 2” Panel Clips• 72” Continuous length• 144” Continuous length• Custom cut

Features• 1/2” minimum clearance between top of the panel and finished ceiling• 6063 Alloy Aluminum

Part Number• MF375

Available size:• 1 1/2” Panel Clips• 72” Continuous length• 144” Continuous length• Custom cut

Features• 3/4” minimum clearance between top of the panel and finished ceiling• 6063 Alloy Aluminium


1/4 Projection

2” Length3/8 Lift off

MONARCH

.200” Projection

5/8 Lift off

MONARCH

1 1/2” Length

MONARCH Z CLIPSSpecialty Z Clips


1/4” Lift O� Clips

Even Hole MF375 Clip


Features• In line holes for 50% increase in panel processing speed• 32mm hole spacing for line boring equipment

Part Number• MF375 Even

2” Length

MONARCH

1/4 Projection

3/8 Lift off

2” Length

MONARCH

1/4 Projection

1/4 Lift off


Features• 1/4” lift off permits 3/8” minimum clearance between the top of the panel and the finished ceiling



MONARCH Z CLIPSStainless Steel Z Clips

Available size:• 1 1/2” Panel Clips• 48” continuous length• Custom cut

1/4” Projection

3/4” Lift off

MONARCH

1 1/2” Length

Features• Suitable for wet or outdoor applications and resistant to rust• Standard in 304 alloy 11 gauge stainless steel and

available in 316 alloy Marine Grade 11 gauge stainless steel

• High strength stainless steel has up to 90,000 psi tensile strength

• Same quick and easy installation as other Z clips

ARCHITECTURALMETALS

Angle: Aluminum, Stainless

and Steel ..................................................... 12

Anodized Aluminum Angle

and Structural Shapes ............................ 19

Channel: Aluminum, Stainless

and Steel ..................................................... 19B

Flat Bar: Aluminum, Stainless

and Steel ..................................................... 24

Diamond Tread Plates ........................... 29

Aluminum T Bar ....................................... 31

Aluminum Zees ........................................ 33


DIMENSION DIMENSION DIMENSION DIMENSION THICKNESS

A B A B t

1/2 x 3/8 1 1/2 1/2 1/8

1/2 3/4 1/81/2 1 1/8

1 1/2 1/81 1/2 3/16

5/8 x 5/8 1 1/2 1/4

3/4 x 3/8 1 3/4 1 3/4 1/83/8

3/4 2 1/2 1/83/4 3/4 1/83/4 1 1/8

1 3/167/8 x 7/8 1 1/2 1/8

1 1/2 3/161 x 1/2 1 1/2 1/4

1/2 2 1/8

1/2 2 3/163/4 2 1/4

1

1 2 1/2 1 1/2 1/811 2 1/2 2 1/8

2 3/161 1/4 x 1/2 2 1/4

3/4 2 1/2 1/81

x

xx

x

xx

xxx

x

xx

xxx

xxx

xxx 2 1/2 3/16

1 1/4 2 1/2 1/41 1/4

1 1/4

THICKNESS

t

1/16

1/161/8

1/8

3/321/8

1/163/321/8

1/8

1/163/32

1/81/81/16

1/83/161/4

1/81/81/8

1/83/16

1/4 2 3/4

x

x

x

x

x

x 1 3/4

x

xx

x

xxx

xx

xxx

xx

x

xx

xxx

x

x 1/4

Alloy : 6063 AluminumType : Equal Legs & Unequal LegsStd Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Anodized, Polished

ALUMINUM ANGLEArchitectural Aluminum Angle

xxx

xx

x



A B A B t

3 x 1/2

12

2

3 1/2 x

3 3 3

1 1/4

4 x 2

4

x

xxxxxx

x

x

x

THICKNESS

t

1/8

1/81/81/41/83/161/4

1/8

1/8

1/8

Alloy : 6063 AluminumType : Equal Legs & Unequal LegsStd Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Anodized, Polished

Architectural Aluminum AngleALUMINUM ANGLE

5 x 3 x 1/8



A B A B t

3/4 x 3/4 2 2 1/8

3/16

1/45/163/8

1 1/4 x 1 1/4

1 1/2 x 1 1/2

x

x

x

THICKNESS

t

1/8

1/4

1/83/16

1/4

1/83/16

1/4

x x

3/8

Alloy : 6061 AluminumType : Equal Legs & Unequal LegsStd Lengths : 25'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Polished

ALUMINUM ANGLEStructural Aluminum Angle

3/16

1 1/2 x 1 x 1/4

1 1/2 x 1 1/4 x 1/8

3/161/4

1 3/4 x 1 1/4 x 1/81/4

1 3/4 x 1 3/4 x 1/83/16

1/4

2 x 1 1/2 x 1/83/16

1/4

1 1/23/16

x x

1/4

3/16

1/4

2 1/2 2 1/2 1/83/161/45/163/8

x x

1 x 1 x 1/8

3 2 3/161/43/8

x x

3 2 1/2x x 1/4

3/8

3 3 3/161/45/16

x x

1/2

2 1/2

2x x2 1/2

1/8



A B A B t

3 1/2 x 2 1/2 x

THICKNESS

t

1/4

3/81/2

Structural Aluminum AngleALUMINUM ANGLE

Alloy : 6061 AluminumType : Equal Legs & Unequal LegsStd Lengths : 25'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Polished

3 1/2 x 3 1/2 x 1/4

3/81/2

4 x 3 x 1/4

3/81/2

4 x 4 x 1/43/8

1/2

5 x 3 x 3/8

1/2

5 x 5 x 3/8

1/2

6 x 3 x 3/8

1/23 1/2 x

4 x 3/81/2

6 x 3/81/2

8 x 6 x 3/4

1/28 x



A B A B t

3/4 x 3/4 x

THICKNESS

t

1/8

3/16

Alloy : 304 or 316 AlloyType : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Polished

STAINLESS STEEL ANGLEEqual & Unequal Leg Stainless Steel Angle

1 x 1 x 1/83/161/4

1 1/4 x 1 1/4 x 1/83/161/4

1 1/2 x 1 1/2 x 1/83/161/4

2 x 2 x 1/83/161/43/8

2 1/2 x 2 1/2 x 3/161/43/8

3 x 3 x 3/161/45/163/81/2

4 x 4 x 1/43/81/2

5 x 5 x 3/8

6 x 3 x 3/86 x 3/8

3 1/2 x 3 1/2 x 1/4



A B A B tTHICKNESS

t

Equal & Unequal Leg Steel AngleSTEEL ANGLE

Alloy : Mild SteelType : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill

1/2 x 1/2 x 1/8

3/4 x 3/4 x 1/8

1 x 1 x 1/83/161/4

1 1/4 x 1 1/4 x 1/83/16

1 1/2 x 1 1/2 x 1/83/161/4

1 3/4 x 1 3/4 x 1/83/161/4

2 x 2 x 1/83/161/45/163/8

2 1/2 x 2 1/2 x 3/161/45/163/81/2

3 x 2 x 1/43/81/2

2 1/2 x 1/43/81/2

3 x 1/43/8

1/2

3 1/2 x 2 1/2 x 1/41/2

3 x 1/41/2

3 1/2 x 1/41/2

4 x 3 x 1/43/8

4 x 1/43/81/2

5 x 3 x 1/45/163/81/2



A B A B tTHICKNESS

t

Alloy : Mild SteelType : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill

STEEL ANGLEEqual & Unequal Leg Steel Angle

5 x 3 1/2 x 1/4

5/163/81/25/83/4

5 x 3/81/2

3/4

6 x 6 x 3/81/23/4

8 x 8 x 1/23/4



A B A B tTHICKNESS

t

Alloy : 6063 AluminumType : Equal Legs & Unequal LegsStd Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Clear Anodized

Stock Anodized Angle & ShapesANODIZED ANGLE

3/4 x 3/4 x 1/8

1 x 1 x 1/8

1 1/4 x 1 1/4 x 1/8

1 1/2 x 1 1/2 x 1/8

2 x 1 1/2 x 1/8

• Many More Anodized Shapes & Sizes Available •

• Please Call 631-563-8967 •

• More sizes at www.monarchmetal.com • Call to Order 631-563-896719A


A B A B tTHICKNESS

t

Alloy : Stainless Steel ASTM A1069/A1069M/11Type : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Bead Blasted as Mill, Brushed, or Mirror Polished

STAINLESS STEEL ANGLE - SHARP CORNEREqual & Unequal Leg Stainless Angle

1 x 1 x 1/8

1 1/4 x 1 1/4 x 1/8

1 1/2 x 1 1/2 x 1/8

2 x 2 x 1/8

5 x 5 x 1/4

5 x 5 x 5/16

5 x 5 x 5/8

6 x 6 x 1/4

6 x 6 x 5/8

8 x 8 x 1/4

8 x 8 x 3/8

8 x 8 x 1/2

8 x 8 x 5/8

8 x 8 x 3/4

• Minimum Order Applies •

• Please Call 631-563-8967 •

• More sizes at www.monarchmetal.com • Call to Order 631-563-8967 19B

BASE BASE

A tFLANGE

B

Stainless Sharp Corner ChannelSTAINLESS STEEL CHANNEL - SHARP CORNER

FLANGE

t1

10 x .240 x 2.600 x .4363 x .258 x 1.498 x .273.356 x 1.596 x .273

6 x .437 x 2.157 x .343

7 x .437 x 2.157 x .343

.314 x 2.194 x .366

.419 x 2.299 x .366

.210 x 2.090 x .366

8 x .220 x 2.260 x .390.303 x 2.343 x .390

9 x .233 x 2.433 x .413.285 x 2.485 x .413.448 x 2.648 x .413

.379 x 2.739 x .436 .526 x 2.886 x .436 .673 x 3.033 x .436

12 x .282 x 2.942 x .501 .387 x 3.047 x .501 .510 x 3.170 x .501

15 x .400 x 3.400 x .650

.520 x 3.520 x .650 .716 x 3.716 x .650

BASE BASE

A tFLANGE

BFLANGE

t1

Alloy : Stainless Steel ASTM A1069/A1069M/11Type : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Bead Blasted as Mill, Brushed, or Mirror Polished

• Minimum Order Applies •

• Please Call 631-563-8967 •



A B A B tTHICKNESS

t

Alloy : 6063 AluminumType : Sharp CornerStd Lengths : 16', 8'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Anodized, Polished

ALUMINUM CHANNELAluminum Sharp Corner Channel ( “C Channel”/ “U Channel”)

3/8 x 3/8 x 1/16

1/2 x 3/8 x 1/81/2 x 3/323/4 x 1/8

5/8 x 5/8 x 1/8

3/4 x 3/8 x 1/81/2 x 1/161/2 x 1/83/4 x 1/8

1 x 1/81 1/2 x 1/8

1 x 1/2 x 1/83/4 x 1/8

1 x 1/81 1/2 x 1/8

2 x 1/8

1 1/8 x 1 1/8 x 1/8

1 1/4 x 1/2 x 1/83/4 x 1/8

1 1/4 x 1/8

1 1/2 x 1/2 x 1/83/4 x 1/8

1 x 1/8

1 1/2 x 1/8

1 3/4 x 3/4 x 1/8

1 x 1/81 3/4 x 1/8

2 x 1/2 x 1/81 x 1/81 x 3/16

1 1/2 x 1/82 x 1/82 x 1/4

2 1/4 x 7/8 x 1/8

2 3/8 x 1 1/4 x 3/16

2 1/2 x 1 x 1/81 1/2 x 1/8

3 x 1/2 x 1/81 x 1/82 x 1/83 x 1/8

4 x 1 1/2 x 1/8

5 x 2 x 3/16


BASE BASE

A tFLANGE

B

Aluminum Association Aluminum ChannelALUMINUM CHANNEL

Alloy : 6061 AluminumType : Aluminum AssociationStd Lengths : 25'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Polished

FLANGE

t1

7 x .170 x 2 3/4 x .290

.210 x 3 1/2 x .3502 x .130 x 1 x .130

.170 x 1 1/4 x .260

3 x .130 x 1 1/2 x .200.170 x 1 3/4 x .260

4 x .150 x 2 x .230.190 x 2 1/4 x .290

5 x .150 x 2 1/4 x .260.190 x 2 3/4 x .320

6 x .170 x 1/4 x .290.210 x 3 1/4 x .350

8 x .190 x 3 x .350.250 x 3 3/4 x .410

9 x .230 x 3 1/4 x .350.290 x 4 x .440

10 x .250 x 3 1/2 x .410.310 x 4 1/4 x .500

12 x .290 x 4 x .470.350 x 5 x .620

.210 x 3 1/2 x .380

BASE BASE

A tFLANGE

BFLANGE

t1



A B A B tTHICKNESS

t

Alloy : 6061 AluminumType : American StandardStd Lengths : 25'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Polished

ALUMINUM CHANNELAmerican Standard Aluminum Channel

3 x 1.41 x .170

1.50 x .2581.60 x .356

4 x 1.58 x .1801.65 x .2471.72 x .320

5 x 1.75 x .1901.89 x .3252.03 x .472

6 x 1.92 x .2001.95 x .2252.03 x .3142.16 x .437

7 x 2.11 x .2302.19 x .314

8 x 2.29 x .250

2.34 x .3032.53 x .487

9 x 2.43 x .2302.65 x .448

10 x 2.60 x .2402.89 x .526

12 x 2.96 x .3003.05 x .3873.17 x .510

15 x 3.40 x .4003.72 x .716

• More sizes at www.monarchmetal.com • Call to Order 631-563-8967 23A


A B A B tTHICKNESS

t

Stainless Steel ChannelSTAINLESS STEEL CHANNEL

Alloy : 304 AlloyType : ASTM A 276Std Lengths : 20', RLCustom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish

1 1/2 x 3/4 x 1/8

2 x 1 x 1/81/4

3 x 1 3/8 x 3/161/41 1/2 x

4 x 1 3/4 x 1/4

6 x 3 x 3/8


A B A B tTHICKNESS

t

Mild Steel ChannelSTEEL CHANNEL

Alloy : Mild SteelType : ASTM A 36Std Lengths : 20', 40'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill

3 x 1.41 x .1701.50 x .2581.60 x .3561.94 x .312

4 x 1.58 x .1841.65 x .2471.72 x .3212.50 x .500

5 x 1.75 x .1901.89 x .325

6 x 1.92 x .2002.03 x .3142.50 x .3102.16 x .4373.50 x .3403.00 x .375

7 x 2.09 x .2102.19 x .3142.30 .419

8 x 1.88 x .1802.26 x .2202.34 x .3032.53 x .4873.03 x .4003.50 x .427

9 x 2.43 x .2332.49 x .2852.65 x .488

10 x 2.60 x .2402.74 x .3793.50 x .3122.89 x .5263.95 x .425

3.03 x .673

12 x 1.50 x .1902.94 x .2823.05 x .3873.17 x .5103.67 x .3703.77 x .4673.89 x .590

13 x 4.00 x .375

18 x 3.95 x .4504.00 x .500


DIMENSION

ATHICKNESS

t

Alloy : 6063 AluminumType : ASTM B 221Std Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Anodized, Polished

DIMENSION

ATHICKNESS

t

1/8 x 1/81/23/4

11 1/41 1/21 3/4

23

3/16 x 3/161/23/4

11 1/41 1/21 3/4

2

1/4 x 1/41/25/83/4

11 1/2

22 1/2

34

3/8 x 3/83/4

11 1/2

22 1/2

34

1/2 x 1/23/4

11 1/41 1/2

2

3/4 x 3/41

1 1/41 1/2

1 x 1 1/2


FLAT BARAluminum Flat Bar

1/8 x 1/8

1/4

1/25/83/47/8

11 1/41 1/21 3/4

22 1/2

3

1/4 x 1/43/81/25/83/47/8

11 1/41 1/21 3/4

22 1/42 1/2

33 1/2

5/16 x 5/16

1/23/4

11 1/41 1/21 3/4

22 1/42 1/2

34

3/8 x 3/81/25/83/4

11 1/41 1/21 3/4

22 1/42 1/2

33 1/2

44 1/2

56

3/8

DIMENSION

ATHICKNESS

tDIMENSION

ATHICKNESS

t


Alloy : 304 or 316 AlloyType : ASTM A 276/479Std Lengths : 12'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Polished

FLAT BARStainless Steel Flat Bar

DIMENSION

ATHICKNESS

tDIMENSION

ATHICKNESS

t

1/2 x 1/23/47/8

11 1/41 1/21 3/4

22 1/2

33 1/2

44 1/2

56

5/8 x 5/83/4

11 1/41 1/21 3/4

22 1/42 1/2

33 1/2

456

3/4 x 3/41

1 1/41 1/21 3/4

22 1/42 1/2

33 1/2

44 1/2

56

7/8 x 11 1/41 1/2

2

1 x 1 1/41 1/21 3/4

22 1/42 1/2

33 1/2

44 1/2


Stainless Steel Flat BarFLAT BAR


1 x 568

1 1/4 x 1 1/22

2 1/42 1/2

33 1/2

456

1 1/2 x 1 3/42

2 1/42 1/2

346

1 3/4 x 22 1/42 1/2

3456

2 x 2 1/42 1/2

3456

DIMENSION

ATHICKNESS

tDIMENSION

ATHICKNESS

t


FLAT BARStainless Steel Flat Bar


DIMENSION

ATHICKNESS

t

Alloy : 360 AlloyType : ASTM B 16Std Lengths : 12'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Polished

DIMENSION

ATHICKNESS

t

1/8 x 1/83/161/45/163/81/25/83/47/8

11 1/41 1/21 3/4

22 1/42 1/2

33 1/2

4

3/16 x 3/163/81/25/83/47/8

11 1/4

1 1/21 3/4

2

2 1/2

3/16 x 33 1/2

4

1/4 x 1/45/163/81/25/83/47/8

11 1/41 1/21 3/4

22 1/22 3/4

33 1/2

4

5/16 x 5/163/81/25/83/4

11 1/41 1/2


FLAT BARBrass Flat Bar

THICKNESS WIDTH

t (Inches)LENGTH

(Inches)

Alloy : 3003 Alloy or 6061 AlloyType : Diamond PatternStd Lengths : See BelowCustom : Available Cut to SizeFinishes : Mill or Bright Finish

THICKNESS WIDTH

t (Inches)LENGTH

(Inches)

.063 x 48 x 9648 x 120

.100 x 48 x 96

.125 x 48 x 9648 x 120

.190 x 48 x 9648 x 120

.250 x 48 x 9648 x 120

.375 x 48 x 9648 x 120

.500 x 48 x 9648 x 120

DIAMOND-TREAD PLATES


Aluminum

THICKNESS WIDTH

t (Inches)LENGTH

(Inches)

Alloy : 304 AlloyType : Diamond PatternStd Lengths : See BelowCustom : Available Cut to SizeFinishes : Mill

THICKNESS WIDTH

t (Inches)LENGTH

(Inches)

.125 x 48 x 120

.188 x 36 x 12048 x 9648 x 120

.250 x 48 x 96

.375 x 48 x 96


DIAMOND-TREAD PLATESStainless Steel


A B A B tTHICKNESS

t


3/4 x 3/4 x 1/8

1 x 1 x 1/8

1 1/4 x 7/8 x 1/8

1 1/2 x 1/2 x 1/8

2 x 3/4 x 1/82 x 3/162 x 1/4

ALUMINUM TEES


Sharp Corner Aluminum T Bar


A B A B tTHICKNESS

t

Alloy : 6061 AluminumType : American StandardStd Lengths : 25'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill

1 1/2 x 1 1/2 x 1/4

2 x 2 x 3/162 x 1/4

2 1/2 x 2 1/2 x 5/16

3 x 3 x 3/8

4 x 4 x 3/8


Structural Aluminum T BarALUMINUM TEES


A B A B tTHICKNESS

t


1/2 x 1/2 x 3/32

3/4 x 3/4 x 1/8

7/8 x 3/4 x 1/8

1 1/8 x 1 x 1/8

Sharp Corner Aluminum Z BarALUMINUM ZEES


ALUMINUM ZEESStructural Aluminum Z Bar



A B A B tTHICKNESS

t

Alloy : 6061 AluminumType : Sharp Corners, Radius on Interior AnglesStd Lengths : 25'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill

3 x 2 11/16 x 1/4

4 x 3 1/16 x 1/4

STANDOFFS

Aluminum Standoffs .............................. 37

Stainless Standoffs ................................. 39


STANDOFFS

Low Profile Cap

Standard Cap

Vinyl Washers available

in stock sizes

Vinyl Washers

Threaded Studs• 5/16” - 18 thread standard• Custom sizes available

Stando� Barrels

Mounting Hardware

• Stock lengths in 1” to 6”• Stock diameters from 1” to 2”• Custom sizes available• Available in aluminium, stainless steel, bronze, steel and copper• Stock finishes include clear anodized for aluminium and brushed for stainless steel• Custom finishes available

Hanger Bolts for mounting to wood

Threaded Rod, Washer and Nut availablefor mounting to countertops

Stando� Cap

11

22

3

3

3

4

4

5

5

6

6

7

7

STANDOFFS (ALUMINUM)Aluminum Stando�s


Step 1: Choose a Barrel Diameter and Height

Step 3: Specify the Cap

1” Dia.

**Available in Standard or Custom Lengths

5/16” - 18 Thread. Please specify the thickness

of the panel or glass.

(5/16”-18 Thread)

3/8”Height$6.00

1/8”Exposed

$8.30

**Requires a 1/2” Dia hole with minimum depth 1/4”. 3/8” overall cap height.

1/2”Height$6.50

1/8”Exposed

$9.52

1/2”Height$7.00

1/8”Exposed$10.65

5/8”Height$13.00

1/8”Exposed$14.90

1 1/4” Dia. 1 1/2” Dia. 2” Dia.

$4.14 $6.36 $7.80 $12.54

$6.30 $7.98 $8.22 $17.52

$7.20 $8.64 $10.50 $20.82

$7.92

1”

Length**

Standard Cap

Low Profile Cap **

2”

3”

4” $9.60 $11.82 $24.72

*6” $11.83

Step 2: Choose a Threaded Connector Length (Included in Price)

Barre

l Heig

ht

Diameter

* *

Manufactured to Order *

1” Dia. 1 1/4” Dia. 1 1/2” Dia. 2” Dia.


STANDOFFS (ALUMINUM)Aluminum Stando�s

Step 4: Selecting Mounting Method

Hanger Bolts ($0.79)Option A

Option B

Option C

1 1/2” Overall Length with5/8” Machine Thread

2 1/2” Overall Length with 1” Machine Thread

4” Overall Length with 2” Machine Thread

Tabletop Screwwith Anchor ($1.29)

**Machine threading is 5/16”-18

• Clear Vinyl Washers available ($0.75 each)

• 1/2” i.d. x 5/8” o.d. clear plastic tube in 3/16” length available ($0.50 each)

• Stock finish is clear anodized. Please call to discuss other finish options.

Option A

Option B

Option C

1 “ Thick Surface

1.25” Thick Surface


Options:

STANDOFFS (STAINLESS STEEL)Stainless Steel Stando�s


Step 1: Choose a Barrel Diameter and Height

Step 3: Specify the Cap

1” Dia.

(5/16”-18 Thread)

3/16”Height$8.00

* Stem of stainless caps is 7/16” diameter and they require a hole with

a minimum depth of 3/16”. The overall length of the cap is 3/8”.

3/16”Height$9.00

3/16”Height$10.50

3/16”Height$12.00

1 1/4” Dia. 1 1/2” Dia. 2” Dia.

$9.00 $13.00 $14.00 *$10.50 $14.50 $16.00

$13.00 $16.00 $17.50

1”

Length**

1 1/2”

2”

3”

Step 2: Choose a Threaded Connector Length (Included in Price)

Manufactured to Order *

**

*$15.00

Barre

l Heig

ht

Diameter

1” Dia. 1 1/4” Dia. 1 1/2” Dia. 2” Dia.

4” ****6” ****

*

**Available in Standard or Custom Lengths

5/16” - 18 Thread. Please specify the thickness

of the panel or glass.

$18.00 $19.50

1/8”Exposed$12.49

** Requires a 1/2” Dia hole with minimum depth 1/4”. 3/8” overall cap height.

1/8”Exposed$13.39

1/8”Exposed$14.89

1/8”Exposed$16.39

Low Profile Cap **

Standard Cap


STANDOFFS (STAINLESS STEEL)Stainless Steel Stando�s

Step 4: Selecting Mounting Method

Hanger Bolts ($0.79)Option A

Option B

Option C

1 1/2” Overall Length with5/8” Machine Thread

2 1/2” Overall Length with 1” Machine Thread

4” Overall Length with 2” Machine Thread

Tabletop Screwwith Anchor ($1.29)

**Machine threading is 5/16”-18

• Clear Vinyl Washers available ($0.75)

• 7/16” i.d. x 9/16” o.d. clear plastic tube in 3/16” length available ($0.50 each)

• Stock finish is brushed. Please call to discuss other finish options.

Option A

Option B

Option C

1 “ Thick Surface



Options:

CORNER GUARDS& KICK PLATES

Corner Guards .......................................... 42

Kick Plates ..................................................43

DIMENSION DIMENSION PRICE STANDARD

A BTHICKNESS

t

Alloy : 304 Stainless, Aluminum, Diamond PlateType : 16 Gauge (Standard), 14 Ga., 18 Ga.Std Lengths : 4', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Brushed Finish, Polished

CORNER GUARDSStainless Steel & Aluminum

• Custom Shapes & Sizes Available •

• Please Call 631-563-8967 •


1 1/4 x 48 x 1/16 $31.35 16 Ga Stainless Steel, Adhesive Mounted1 1/4 x 96 x 1/16 $53.651 1/2 x 48 x 1/16 $36.941 1/2 x 96 x 1/16 $63.272 1/2 x 48 x 1/16 $55.902 1/2 x 96 x 1/16 $100.493 1/2 x 48 x 1/16 $78.823 1/2 x 96 x 1/16 $141.61

90 Angle˚

Bullnose3 1/2 x 48 x 1/16 $78.823 1/2 x 96 x 1/16 $141.61

90°SharpAngle

90°Rounded

Angle

A

t

B

t

A

B

16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted

16 Ga Stainless Steel, Adhesive Mounted

16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted


Alloy : 304 Stainless, Aluminum, Bronze, BrassType : 18 Gauge (Standard), 16 Ga., 11 Ga.Std Lengths : See BelowCustom : Available with Rough Finish for Adhesive, Punched, or Punched & CountersunkFinishes : Mill, Brushed Finish, Polished

Stainless Steel & AluminumKICK PLATES

• Custom Shapes & Sizes Available •

• Please Call 631-563-8967 •

24 x 34 x 18 Ga. $38.6328 x 6 x 18 Ga. $16.0928 x 8 x 18 Ga. $18.7928 x 10 x 18 Ga. $26.8028 x 12 x 18 Ga. $32.1728 x 36 x 18 Ga. $90.9528 x 42 x 18 Ga. $130.5030 x 6 x 18 Ga. $17.2330 x 8 x 18 Ga. $20.1030 x 10 x 18 Ga. $28.7130 x 12 x 18 Ga. $34.4634 x 6 x 18 Ga. $19.5134 x 8 x 18 Ga. $22.7734 x 10 x 18 Ga. $32.5434 x 12 x 18 Ga. $39.0634 x 16 x 18 Ga. $48.2934 x 34 x 18 Ga. $107.9834 x 36 x 18 Ga. $107.9834 x 42 x 18 Ga. $124.5634 x 46 x 18 Ga. $124.56

36 x 8 x 18 Ga. $23.6236 x 10 x 18 Ga. $34.4636 x 12 x 18 Ga. $41.34

DIMENSION DIMENSION PRICE STANDARD

A BTHICKNESS

t

A

Bt

Armor PlateMop PlateKick PlateKick PlateKick Plate

Armor PlateArmor PlateMop PlateKick PlateKick PlateKick PlateMop PlateKick PlateKick PlateKick PlateKick Plate

Armor PlateArmor PlateArmor PlateArmor Plate

Kick PlateKick PlateKick Plate

TYPE

18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes

monarch cat 2013 - final rev g 06-19-2013 small file sz

Documents