montavimo technika armaturos strypams

8/16/2019 Montavimo Technika Armaturos Strypams

http://slidepdf.com/reader/full/montavimo-technika-armaturos-strypams 1/5123

FOR USE WITH

FIS EM mortar FIS V mortar FIS VS mortar

see page 67 see page 71 see page 79

Rebar connections Rebar connections

Professional rebar connections

ADVANTAGES

▪ The injection mortars FIS V / VS

allow for rebar connections from

Ø8 to 28 mm, whilst injection mortar

FIS EM allows for rebar connections

up to Ø40 mm to be carried out. This

offers maximum flexibility.

▪ FIS EM also allows for the execution of

rebar connections in diamond-drilled

holes. ▪ The FRA with connecting thread in

stainless steel A4 fully utilises the

load-bearing capacity of the concrete.

This means that extremely high tensile

loads can be introduced into the base

material.

▪ Accessories in line with building site

requirements, such as injection adapt-

ers and extension tubes, ensure rapid

progress.

▪ The FIS rebar case contains all of the

individual components required, thus

ensuring a convenient installation.

APPLICATIONS

▪ Post-installed concrete steel bars, e.g.

for overlap connections, end anchor-

ings, starter bars, needlings etc.

▪ Rebar anchor FRA

FUNCTIONING

▪ Anchoring as with cast-in reinforce-

ment bars in line with Eurocode 2 and

DIN 1045-1.

▪ The mortar is extruded bubble free

into the drill hole using the injec-

tion adapter. The geometry causes a

build-up of pressure in the drill hole,

which pushes the injection adapter

and extension tube automatically outof the drill hole.

▪ The mortar bonds the entire surface

of the reinforcement bar with the drill

hole wall.

▪ A special certification is necessary for

installation according to approval in

Germany. The fischer Academy offers

the relevant training courses.

BUILDING MATERIALS

Approved for:

▪ Concrete C12/15 to C50/60,

cracked and non-cracked

APPROVALS

C h e m i c a

l fi x i n g s

Rebar connections



INSTALLATION WITH FIS V / FIS VS

INSTALLATION WITH WITH EM IN DIAMOND DRILLED HOLES

INSTALLATION WITH FIS EM IN HAMMER DRILLED HOLES

TECHNICAL DATA

Rebar anchor FRA

Combination

of materials

A

p p r o v a l Total length Max. fixing

thickness

Drill-hole Fill quantity Sales unit

l tfix d0

Art.-No. DIBt ETA [mm] [mm] [Ø mm] [scale units] [pcs]

Item

FRA 12/900 M12-60 505529 ▯ ■ 975 60 16 50 8

FRA 16/1100 M16-60 505533 ▯ ■ 1180 60 20 81 8

FRA 20/1400 M20-60 505534 ▯ ■ 1485 60 25 160 4

Reinforcement bar welded with threaded part made of stainless stell A4.

Chemica

lfixings

Rebar connections



TECHNICAL DATA

FIS-Rebar Case for reinforcement connection

A p p r o v a l

Contents Sales unit

Item Art.-No. DIBt ETA [pcs]

FIS-Rebar case D 505941 ▯ ■

8 x Cleaning brush, 5 x Extensions for cleaning brushes à 40 cm,

1 x SDS Chuck with intern al thread M 8, 24 x Injection adapter,

1 x Cleaning hose complete, 1 x Brush control template, 8 x Cleaning nozzle,

1 x Marker tape, 1 x Digital thermometer, 1 x Protective goggles,1 x Installation instructions (german), 10 x Installation report,

2 x Flat spanner SW 7 and the relevant approvals

1

FIS-Rebar case Int 505942 — ■

8 x Cleaning brush, 5 x Extensions for cleaning brushes à 40 cm,

1 x SDS Chuck with intern al thread M 8, 24 x Injection adapter,

1 x Cleaning hose complete, 1 x Brush control template, 8 x Cleaning nozzle,

1 x Marker tape, 1 x Digital thermometer, 1 x Protective goggles,

1 x Installation instructions (german, english, french, italian, spanish),

10 x Installation report, 2 x Flat spanner SW 7 and the relevant approvals

1

ACCESSORIES

Cleaning brush with thread M 8

Colour Length Sales unit

Item Art.-No. [mm] [pcs]

Brush for drill-Ø 12 mm 001490 white - 1

Brush for drill-Ø 14 mm 001491 blue - 1

Brush for drill-Ø 16 mm 001492 red - 1

Brush for drill-Ø 18 mm 001493 yellow - 1

Brush for drill-Ø 20 mm 001494 green - 1

Brush for drill-Ø 25 mm 001495 black - 1

Brush for drill-Ø 30 mm 090063 grey - 1

Brush for drill-Ø 35 mm 090071 brown - 1

Brush for drill-Ø 40 mm 505061 - - 1



FIS brush extension 508791 - 420 1SDS Chu ck wi th i nt erna l t hrea d M 8 5 11 96 1 - - 2

ACCESSORIES

Injection adapter for drill Ø 12 - 25 mm Injection adapter for drill Ø 30 - 55 mm

Extension tube

Colour Sales unit

Item Art.-No. [pcs]

Injection-adapter (Ø 9) for drill-Ø 12 mm 001497 white 10

Injection-adapter (Ø 9 for drill-Ø 14 mm 001498 blue 10

Injection-adapter (Ø 9) for drill-Ø 16 mm 001499 red 10

Injection-adapter (Ø 9) for drill-Ø 18 mm 001483 yellow 10

Injection-adapter (Ø 9 for drill-Ø 20 mm 001506 green 10

Injection-adapter (Ø 15) for drill-Ø 20 mm 001508 green 10

C h e m i c a

l fi x i n g s

Rebar connections



ACCESSORIES

Injection adapter for drill Ø 12 - 25 mm Injection adapter for drill Ø 30 - 55 mm

Extension tube

Colour Sales unit

Item Art.-No. [pcs]

Injection-adapter (Ø 9) for drill-Ø 25 mm 001507 black 10

Injection-adapter (Ø 15) for drill-Ø 25 mm 001509 black 10

Injection-adapter (Ø 9) for drill-Ø 30 mm 090689 grey 10

Injection-adapter (Ø 15) for drill-Ø 30 mm 090700 grey 10

Injection-adapter (Ø 9) for drill-Ø 35 mm 090699 brown 10

Injection-adapter (Ø 15) for drill-Ø 35 mm 090701 brown 10

Injection-adapter (Ø 9) for drill-Ø 40 mm 505077 - 10




Injection-adapter (Ø 9) for drill-Ø 55 mm 505078 - 10Injection-adapter (Ø 15) for drill-Ø 55 mm 505080 - 10

FIS Extension tube 048983 - 10

Extension tube Ø 15 (1,9 m) 001489 - 10

ACCESSORIES

Drilling aid

Sales unit

Item Art.-No. [pcs]

Drilling aid 3pcs. 090819 1

ACCESSORIES

SDS-max scrabbeling tool to roughen the connection surface

Fits Dimensions Sales unit

Item Art.-No. [mm] [pcs]

Stocker 001253 Chuck type SDS max 45 x 240 1

ACCESSORIES

Compressed air nozzle

Fits Sales unit

Item Art.-No. [pcs]

Compressed air nozzle D12-D15 511956 Drill diameter Ø 12 - 15 mm 2



Compressed air nozzle D30-D35 511959 Drill diameter Ø 30 - 35 mm 2Compressed air nozzle D40-D55 511960 Drill diameter Ø 40 - 45 mm 2

Chemica

lfixings

Rebar connections



Cracked or Non-cracked concrete

Rebar Basic anchorage length4)

for FIS V, FIS VS

Basic anchorage length4)

for FIS EM

Max. permissible

embedment depth

Max. design resistance

for tensile load

Max. permissible

tensile load

lb,rqd lb,rqd max lv NRd,s3) Nperm,s

3)

[mm] [mm] [mm] [kN] [kN]

Ø 8 mm 378 378 1800 21,9 15,6

Ø 10 mm 473 473 1800 34,1 24,4

Ø 12 mm 567 567 1800 49,2 35,1

Ø 14 mm 662 662 1800 66,9 47,8

Ø 16 mm 756 756 1800 87,4 62,4

Ø 20 mm 945 945 1800 136,6 97,6

Ø 25 mm 1181 1181 2000 213,4 152,4

Ø 28 mm 1323 1323 2000 267,7 191,2

Ø 32 mm - 1512 2000 349,7 249,8

Ø 36 mm - 1701 2000 442,6 316,1

Ø 40 mm - 1890 2000 546,4 390,3

Injection system FIS V, FIS VS and FIS EM with Rebars from steel type BSt 500 S5)

Design resistant loads and permissible tensile loads1) 6) of a single post-installed Rebar in concrete C20/252).

For the design and planning the complete approval ETA - 09/0089 and ETA - 08/0266 have to be considered.

1) The partial safety factors for material resistance as regulated in the European Standard EN 1992-

1-1 as well as a partial safety factor for load actions of L = 1,4 are considered.2) The ETA-approvals for FIS V and FIS EM allow post-inst alled rebar connections in concrete C12/15

up to C50/60. When using another concrete strength class the given basic anchorage length will

change.3) When using the full steel capacity.4) Basic anchorage length" according EN 1992-1-1, chapter 8.4.3 for concrete strength class

C20/25 for "good bond conditions"5) Rebars with a characteristic yield strength fyk = 400 - 600 N/mm² according EN 1992-1-1

Annex C,Table C.1 and C.2N are permitted. When using an other steel quality the given basic

anchorage length as well as the steel capacity (see foot note 3) will change.6) Fixations with post-installed rebars with FIS V and FIS EM are permitted in dry and wet concrete

for temperatures in the substrate up to +50°C (resp. short term up to 80°C) and best possible

drillhole cleaning according approval.7) For determination of the installation measures (minimum concrete cover, spacings e.g.) as well

as an eventually required transverse reinforcement see EN 1992-1-1 and the general instruction

rules of the approvals.

LOADS

Cracked or Non-cracked concrete

Type Basic

anchorage length4)

Max. effective

embedment depth

Max.

embedment depth

Installation torque Max. design resistance

for tensile load

Max. permissible

tensile load

lb,rqd max lv max le,ges Tinst NRd,s3) Nzul,s

3)

[mm] [mm] [mm] [Nm] [kN] [kN]

FRA 12/900 M12 567 800 900 50,0 49,2 35,1

FRA 16/1100 M16 756 1000 1100 100,0 87,4 62,4

FRA 20/1400 M20 945 1300 1400 150,0 136,6 97,6

Injection system FIS V, FIS VS and FIS EM with Rebar anchor FRA5)

Highest permissible tensile loads1) 6) for a single Rebar anchor in concrete C20/252).

For the design and planning the complete approvals ETA - 09/0089 and ETA - 08/0266 have to be considered.

1) The partial safety factors for material resistance as regulated in the European Standard EN

1992-

1-1 as well as a partial safety factor for load actions of L = 1,4 are considered.2) The ETA-approvals for FIS V and FIS EM allow post-inst alled rebar connections in concrete C12/15

up to C50/60. When using another concrete strength class the given basic anchorage length will

change.3) When using the full steel capacity.4) Basic anchorage length according EN 1992-1-1, chapter 8.4.3 for concrete strength class C20/25

for „good bond conditions“

5) Reinforcement bar BSt 500 S according EN 1992-1-1 Annex C,Table C.1 and C.2N.6) Fixations with post-installed Rebars anchors FRA with FIS V and FIS EM are permitted in dry and

wet concrete for temperatures in the substrate up to +50°C (resp. short term up to 80°C) and

best possible drillhole cleaning according approval.7) For determination of the installation measures (minimum concrete cover, spacings e.g.) as well

as an eventually required transverse reinforcement see EN 1992-1-1 and the general instructionrules of the approvals.

LOADS

C h e m i c a

l fi x i n g s

Rebar connections

montavimo technika armaturos strypams

Documents