monthly notifications register · information procedure page 1 monthly notifications register...

Information procedure

Monthly Notifications Register

Notifications registered at CCMC from 2011-07-01 to 2011-07-31

Register issued on : 2011-08-01

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2011-07-12Organization : NSAICountry : IrelandProject ID : 01078879/0001 Project EstablishedICS : 03.080.99National Ref : SWiFT 9Title : Guide to good practice for universal design in energy customer services.Scope : This Swift provides guidance on universal design for the suppliers of houshold customers in

the provision of energy products, supporting services and communications.

Relatedness :National : REV/AMD SWiFT 9

Subsector : A99 (Secondary Subsector)

Registration Date : 2011-07-04

Organization : BSICountry : United KingdomProject ID : 01101521/0001 Project EstablishedICS :National Ref : BS 8577Title : Financial advice and planning services. Specification

Relatedness :National : New

Subsector : A99 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 40005950/0001 Project EstablishedICS : 55.160National Ref : U40005950Title : Coffins - Wooden coffins - Parts, construction, markingScope : The standard defines the nomenclature of the main parts, the construction and marking of

the wooden coffins for transport, burial or cremation of corpses.


** End of Subsector **

** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023960/0001 Project EstablishedICS : 13.220.20National Ref : ÖNORM F 3032Title : Components of automatic fire detection systems - Fire brigade key box - Requirements

and test specificationsScope : This ÖNORM defines requirements and test specifications for the fire brigade key box. The

fire brigade key box is a part of an automatic firefighting system. It shall be installed in those cases, were it is not ensured by a company, that in case of a fire, the fire brigade has access to the building at any time.


Subsector : B01 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 39001342/0001 Project EstablishedICS : 13.220.50National Ref : U39001342Title : Fire proofing systems - Inspection modes for the installation - Part 2: Passive system:

boards Scope : This standard specifies the inspection modes for the installation of boards system used as

fire proofing systems, for the conformity evaluation to design specification, taking into account the type of protected building element and the requested fire resistance.

Relatedness :National : REV/AMD UNI 10898-2:2003

Subsector : B01 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 39001343/0001 Project EstablishedICS : 13.220.50National Ref : U39001343Title : Fire proofing systems - Inspection modes for the installation - Part 3: Insulating sprayed

passive systemsScope : This standard specifies the inspection modes for the Insulating sprayed systems used as fire

proofing systems, for the conformity evaluation to design specification, taking into account the type of protected building element and the requested fire resistance.


Subsector : B01 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA175198/0001 Project EstablishedICS :

National Ref : PR NF S 61-522Title : Firefighting and rescue service equipment - Axial feed rotary hose reels permanently

installed on vehicles


Subsector : B01 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037957/0001 Project EstablishedICS :National Ref : PNE 23007-14Title : Fire detection and fire alarm systems - Part 14: Planning, design, installation,

commissioning, use and maintenanceScope : This standard covers systems intended for the protection of life and/or the protection of

property. This standard covers systems with at least one fire detector. The systems may be capable of providing signals to initiate, in the event of a fire, the operation of ancillary equipment (such as fixed fire extinguishing systems) and other precautions and actions (such as machinery shutdown), but the standard does not cover the ancillary services themselves. This standard does not cover systems combining fire alarm functions with other non-fire related functions. This standard does not contradict EN 54-14, it completes the national requirements.

Relatedness :National : REV/AMD UNE 23007-14:2009

Subsector : B01 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037958/0001 Project EstablishedICS :National Ref : PNE 23585Title : Fire safety. Smoke and heat control systems. Requirements, calculation and design

methods for temperature control systems and smoke exhaust systems projecting in case of stationary fire.

Scope : The standard establishes requirements, calculation and design methods for temperature control systems and smoke exhaust systems projecting in case of fire

Relatedness :National : REV/AMD UNE 23585:2004


Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 00515793/0001 Project EstablishedICS :National Ref : 00515793Title : German construction contract procedures (VOB) - Part C: General technical

Title : specifications in construction contracts (ATV) - Diaphragm walling


Subsector : B02 Registration Date : 2011-07-04Organization : HZNCountry : CroatiaProject ID : 00548064/0001 Published StandardICS : 91.010.30National Ref : nHRN EN 1990Title : Halal food - Requirements and measuresScope : Eurocode: basis of structural design - National Annex


Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19931122/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1993-1-12:2007/NA:2011Title : Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of

EN 1993 up to steel grades S 700Scope : The standard defines SR EN 1993-1-12:2007 and its corrigendum SR EN

1993-1-12:2007/AC:2009 requirements applicable to the design of buildings and civil engineering works in Romania

Relatedness :National : REV/AMD SR EN 1993-1-12:2007

Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19931612/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1993-1-6:2007/NA:2011Title : Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell

StructuresScope : The standard defines SR EN 1993-1-6:2007 and its corrigendum SR EN



Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19931712/0001 Project EstablishedICS : 91.010.30

National Ref : SR EN 1993-1-7:2007/NA:2011Title : Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of

plane loadingScope : The standard defines SR EN 1993-1-7:2007 and its corrigendum SR EN



Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19934112/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1993-4-1:2007/NA:2011Title : Eurocode 3 - Design of steel structures - Part 4-1: SilosScope : The standard defines SR EN 1993-4-1:2007 and its corrigendum SR EN



Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19934212/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1993-4-2:2007/NA:2011Title : Eurocode 3 - Design of steel structures - Part 4-2: TanksScope : The standard defines SR EN 1993-4-2:2007 and its corrigendum SR EN



Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19934312/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1993-4-3:2007/NA:2011Title : Eurocode 3 - Design of steel structures - Part 4-3: PipelinesScope : The standard defines SR EN 1993-4-3:2007 and its corrigendum SR EN



Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19935123/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1993-5:2007/NA:2011Title : Eurocode 3 - Design of steel structures - Part 5: PilingScope : The standard defines SR EN 1993-5:2007 and its corrigendum SR EN 1993-5:2007/AC:2009

requirements applicable to the design of buildings and civil engineering works in Romania

Relatedness :National : REV/AMD SR EN 1993-5:2007

Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19936123/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1993-6:2007/NA:2011Title : Eurocode 3 - Design of steel structures - Part 6: Crane supporting structuresScope : The standard defines SR EN 1993-6:2007 and its corrigendum SR EN 1993-6:2007/AC:2010

requirements applicable to the design of buildings and civil engineering works in Romania

Relatedness :National : REV/AMD SR EN 1993-6:2007

Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19961212/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1996-1-2:2005/NA:2011Title : Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire

designScope : The standard defines SR EN 1996-1-2:2005 requirements applicable to the design of

buildings and civil engineering works in Romania


Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19991312/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1999-1-3:2007/NA:2011Title : Eurocode 9 - Design of aluminium structures. Part 1-3: Structures susceptible to fatiqueScope : The standard defines SR EN 1999-1-3:2007 requirements applicable to the design of

buildings and civil engineering works in Romania


Subsector : B02 Registration Date : 2011-07-06Organization : ASRO Draft Issue Date : 2011-09-30Country : Romania Latest Date for Comments : 2011-11-30Project ID : 19991412/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1999-1-4:2007/NA:2011Title : Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheetingScope : The standard defines SR EN 1999-1-4:2007 and its corrigendum SR EN



Subsector : B02 Registration Date : 2011-07-18Organization : NBNCountry : BelgiumProject ID : BE054459/0001 Draft for public enquiryICS : 91.010.30National Ref : NBN EN 1990 ANBTitle : Eurocode 0 : Basis of structural design - National annex



Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023957/0001 Project EstablishedICS : 91.010.30National Ref : ÖNORM B 1991-1-1Title : Eurocode 1 - Actions on structures - Part 1-1: General actions - Densities, self-weight

and imposed loads for buildings - National specifications concerning ÖNORM EN 1991-1-1 and national supplements

Scope : This Austrian Standard specifies national parameters to ÖNORM EN 1991-1-1 and shall be applied jointly with ÖNORM EN 1991-1-1 in Austria.



Subsector B06: GYPSUM

Subsector : B06 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038055/0001 Project EstablishedICS :National Ref : PNE 102001Title : Gypsum rock. Classification and characteristics

Scope : This standard sets the technical specifications that has to satisfy gypsum mineral to be raw material for manufacturing plasters, in the construction sector.


Subsector : B06 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038058/0001 Project EstablishedICS :National Ref : PNE 102011Title : Building molding plaster. SpecificationsScope : This standard sets the technical specifications of the special plasters (called "escayolas") for

the construction sector



Subsector B07: GLASS

Subsector : B07 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023959/0001 Project EstablishedICS : 81.040.20National Ref : ÖNORM B 3716-5Title : Glass in building - Structural glass construction - Part 5: Point fixed glazing and special

structuresScope : This Austrian Standard regulates point fixed or point-and-line fixed mounted glazings. It

also applies to glazings intended for regular stiffening. This standard does not apply to all-glass doors, shower doors and/or all-glass structures (doors with side frames and fanlight). The glazings are classified according to their inclination angle to the vertical: - horizontal glazing: angle exceeds 15° - vertical glazing: minimum angle 15°. For glazings providing protection against fall from a height ÖNORM B 3716-3 shall be additionally taken into account, for accessible trafficable and walkable glazings ÖNORM B 3716-4 shall be additionally considered.



Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0035655/0001 Project EstablishedICS :National Ref : PNE 85412Title : Hardware for doors. Locks. Dimensions.Scope : This Standard specifies general specifications and dimensions for vertical locks.


Subsector : B08 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037917/0001 Project EstablishedICS :National Ref : PNE 85247Title : Windows and doors. Watertightness. Site testScope : This standard defines the method used to identify points of water penetration in the

windows, roof windows and doors installed in a building. It is an additional test which is not required for classification purposes and it is intended to verify the correct installation of the window or door in the site by the lack of water during the specified time.

Relatedness :National : REV/AMD UNE 85247:2004 EX


Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2011-07-21Organization : PKNCountry : PolandProject ID : 00211194/0001 Project EstablishedICS : 91.080.30, 91.100.60National Ref : prPN-B-20105Title : Thermal insulations for industrial installations - Requirements on designing, selection of

materials and execution of worksScope : Includes technical requirements on dimensioning of insulation layer, properties of used

materials, methods of their installation by using supporting constructions and installation of protective shields in the form of coat on various industrial and energetic objects


Subsector : B09 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 0201C870/0001 Project EstablishedICS : 91.140.01National Ref : E0201C870Title : Heating and cooling of buildings - Climatic dataScope : This standard provides, at national level, the conventional climatic data to be used for the

design and determination of energy and hygrothermal performance of buildings, included the technical systems for space heating and cooling. The data are divided into two categories: - data representative of average climatic conditions to be used for the determination of energy and hygrothermal performance of buildings. - design data, representative of the limit climatic conditions to be used for the dimensioning of design of technical systems for space heating and cooling and to assess the

Scope : risk of overheating.

Relatedness :National : REV/AMD UNI 10349:1994

Subsector : B09 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0037989/0001 Project EstablishedICS :National Ref : PNE 92301Title : Measurement criteria for pipe systems and equipment thermal insulation worksScope : This standard provides a method of measuring and quantifying thermal insulation works in

building equipments and industrial facilities. Industrial facilities can be, among others, production facilities and distribution of hot and cold fluids in petrochemical plants, thermal and nuclear power stations, as well as in cement, chemical or cryogenic plants, comprising pipes, ducts, boilers, equipment, tanks , etc.



Subsector B11: METAL STRUCTURES

Subsector : B11 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023966/0001 Project EstablishedICS : 77.150.10, 91.080.10National Ref : ONR 21090Title : Guide for the selection of the execution class of steel structures and aluminium

structures Scope : These ONR is a guide for the allocation of the components, constructions and buildings to

the 4 execution classes (EXC1 to EXC4) of steel structures, aluminium structures and composite structures.



Subsector B12: MASONRY

Subsector : B12 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037919/0001 Project EstablishedICS :National Ref : PNE 41302 INTitle : Instructions for the application of rendering and plastering mortars.Scope : This document establishes the reception and installation processes of rendering and

plastering mortars.


Subsector : B12 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037920/0001 Project EstablishedICS :National Ref : PNE 41303 INTitle : Masonry terminology.Scope : This document defines the main terms used in masonry.



Subsector B15: SANITARY APPLIANCES

Subsector : B15 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 00515825/0001 Project EstablishedICS :National Ref : 00515825Title : German construction contract procedures (VOB) - Part C: General technical

specifications in construction contracts (ATV) - Sheet metal roofing and wall covering work



Subsector B24: AUXILIARY AND HANDICRAFT WORK

Subsector : B24 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037875/0001 Project EstablishedICS :National Ref : PNE 304101Title : Ceramic decorative products. Enamelled fired clay elements for gardening. Freeze testScope : This standard establishes a test of liability to frost damage of enamelled fired clay elements

for gardening, particularly, flowerpots.



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2011-07-08

Organization : NSAICountry : IrelandProject ID : 01078878/0001 Project EstablishedICS : 91.140.40National Ref : I.S. 813Title : Domestic gas installations (Edition 3)Scope : Requirements for the installation of natural gas and LPG pipework and appliances.

Relatedness :National : REV/AMD I.S. 813 (revision)


Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038110/0001 Project EstablishedICS :National Ref : PNE 135334Title : Vertical signs. Retroreflective sheetings with glass beads. Characteristics and test

methodsScope : This project revises the previous version (which specifies the characteristics and test

methods for retroreflective sheetings with glass beads used in vertical signs) in order to align it with the corresponding european standard.



Subsector B29: AGGREGATES

Subsector : B29 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 96000290/0001 Project EstablishedICS : 91.100.15National Ref : U96000290Title : Alkali-aggregate reaction in concrete - Determination of the potential alkali-reactivity of

the aggregate for concrete - Petrographic examination to detect potentially alkali-reactive phases of the aggregate

Scope : This standard specifies a test method is part of a test methodology aimed at assessing the alkali-reactivity of aggregates for concrete. This standard usefully supplies the UNI EN 932-3. Petrographic examination is a specific tool to detect and quantify potentially alkali-reactive phases of the aggregate. Test method bases on macroscopic and microscopic analysis and point-counting on thin section of potentially alkali-reactive mineralogical phases and lithotypes of the aggregate. This standard reports a list of the potentially alkali-reactive phases and lithotypes, indicates criteria for the assessment of the alkali-reactivity class of the aggregate and, finally, reports three remarkable case-studies of typical Italian aggregates.


Subsector : B29 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 96000300/0001 Project EstablishedICS : 91.100.15National Ref : U96000300Title : Alkali-aggregate reaction in concrete - Determination of the potential alkaly-reactivity of

the aggregate for concrete - Test of accelerated expansion of mortar barsScope : The standard specifies a test method is part of test methodology aimed at assessing the

alkali-reactivity of aggregates for concrete. With respect to the current version of this test method, changes in the experimental procedures and the results interpretation are proposed, also in the light of recent not conclusive results, information about the possibility of further reactivity characterization, by prolonging testing time and/or by evaluating a specific kinetic reactivity parameter, are provided.


Subsector : B29 Registration Date : 2011-07-28Organization : BDSCountry : BulgariaProject ID : BG005004/0001 Project EstablishedICS : 91.100.15National Ref : BDS EN 13242:2002+А1:2007/prNATitle : Aggregates for unbound and hydraulically bound materials for use in civil engineering

work and road constructionScope : This national annex applies only for aggregates, obtained by processing natural,

manufactured or recycled materials for unbound and hydraulically bound materials for use in civil engineering work and road construction, that meet the requirements of BDS EN 13242:2002+A1:2007. This document supplements BDS EN 13242:2002+A1:2007 and contains national provisions to this standard taking into account the different climatic and geographical conditions, different security levels, and established regional and national traditions and experience in the manufacture and application of aggregates.

Relatedness :National : REV/AMD BDS EN 13242:2002+А1:2007

Subsector : B29 Registration Date : 2011-07-28Organization : BDSCountry : BulgariaProject ID : BG005005/0001 Project EstablishedICS : 91.100.15, 93.080.20National Ref : BDS EN 13043/prNATitle : Aggregates for bituminous mixtures and surface treatments for roads, airfields and other

trafficked areasScope : This national annex applies only for aggregates and filler aggregates, obtained by processing

natural, manufactured or recycled materials for use in bituminous mixtures and surface treatments, that meet the requirements of BDS EN 13043+AC:2005. This national annex does not cover the use of reclaimed bituminous mixtures. This document supplements BDS EN 13043+AC:2005 and contains national provisions to this standard taking into account the different climatic and geographical conditions, different security levels, and established regional and national traditions and experience in the manufacture and application of aggregates and filler aggregates.

Relatedness :National : REV/AMD BDS EN 13043+AC:2005


Subsector B30: FLOOR AND SURFACING

Subsector : B30 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 87005750/0001 Project EstablishedICS : 79.080National Ref : U87005750Title : Screeds - Determination of the mechanical resistance to strenghts parallel to the

substructureScope : The standard defines the test method to determine the mechanical resistance to strenghts

parallel to the substructure used for glued internal floor claddings for all intended uses. Furthermore the method assesses the mechanical resistance of the leveling layers and the stabilization or adhesion effect of primers layers, if any. The standard applies to screeds as defined in EN 13318.


Subsector : B30 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0037113/0001 Project EstablishedICS :National Ref : PNE 41959-1Title : Sport surfaces of natural turf. Part 1: Construction systems for sport surfaces of football,

rugby and golf.Scope : the aim of this guide is to be a guide in the construction of football, rugby and golf sports

surfaces of natural grass outdoor with a regular use.

Relatedness :National : REV/AMD UNE 41959-1:2002 IN


Subsector B32: PRECAST CONCRETE PRODUCTS

Subsector : B32 Registration Date : 2011-07-18Organization : NBNCountry : BelgiumProject ID : BE054453/0001 Draft for public enquiryICS : 91.100.30, 93.020National Ref : NBN B 21-613Title : Precast concrete products - Foundation piles - National supplement to NBN EN

12794+A1:2007


Subsector : B32 Registration Date : 2011-07-18Organization : NBNCountry : BelgiumProject ID : BE054456/0001 Draft for public enquiryICS : 91.100.30, 93.020National Ref : NBN B 21-616Title : Precast concrete products - Beam-and-block floor systems - Part 1 : Beams - National

supplement to NBN EN 15037-1:2008



Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2011-07-14Organization : SFS Draft Issue Date : 2011-07-01Country : Finland Latest Date for Comments : 2011-09-15Project ID : 0000E269/0001 Draft for public enquiryICS :National Ref :Title : Fire precaution of hot works when executing roof and waterproofing work


Subsector : B99 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 00515826/0001 Project EstablishedICS :National Ref : 00515826Title : Assessment of water, soil and gases for their aggressiveness to concrete - Part 1:

Principles and limiting values


Subsector : B99 Registration Date : 2011-07-04Organization : BSICountry : United KingdomProject ID : 01101568/0001 Project EstablishedICS :National Ref : BS 7913Title : Guide to the principles of the conservation of historic buildings


Subsector : B99 Registration Date : 2011-07-06Organization : NENCountry : Netherlands

Project ID : 50001673/0001 Project EstablishedICS : 91.140.50National Ref : NEN 1010:2007+C1:2008/A1:2011 Concept nlTitle : Safety requirements for low-voltage installationsScope : This document contains amendments to NEN 1010:2007 + C1.


Subsector : B99 Registration Date : 2011-07-06Organization : NENCountry : NetherlandsProject ID : 50001674/0001 Project EstablishedICS : 91.060.20National Ref : NEN 6707:2011 Concept nlTitle : Fixing of roof coverings - Requirements and determination methodsScope : This standard gives specificaties for the strength of the fixing of roof coverings. This

standard is applicable to fixing of roof coverings.


Subsector : B99 Registration Date : 2011-07-06Organization : NENCountry : NetherlandsProject ID : 50001675/0001 Project EstablishedICS : 01.040.91, 91.040.01National Ref : NTA 2581:2011 nlTitle : Opstellen NEN 2580-meetrapportenScope : The purpose of this NTA is to make the measurements according to NEN 2580

unambiguous and better.


Subsector : B99 Registration Date : 2011-07-14Organization : SNV Draft Issue Date : 2011-07-06Country : Switzerland Latest Date for Comments : 2011-08-26Project ID : CH110016/0001 Draft for public enquiryICS : 91.010.20National Ref : SN 506511Title : Building constrution cost plan

Relatedness :National : REV/AMD SN 506511 (2009)

Subsector : B99 Registration Date : 2011-07-14Organization : SNV Draft Issue Date : 2011-07-06Country : Switzerland Latest Date for Comments : 2011-08-26Project ID : CH110017/0001 Draft for public enquiryICS : 91.010.20

National Ref : SN 506514Title : Construction cost plan for hospitals


Subsector : B99 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0037991/0001 Project EstablishedICS :National Ref : PNE 41807 INTitle : Mortar plaster repairScope : This document describes the intervention techniques for repairing plaster mortar in

building facades. It applies to those whose binders are limes and cements. Especial emphasis is made in the enumeration and description of each of the repair techniques, although each case requires a specific study to address the problem. The mortars to be considered are produced "in situ", industrial or semi-industrial. A normative annex is included for the listed buildings of cultural interest or qualified, deserving special consideration.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 05701299/0001 Project EstablishedICS : 11.220National Ref : DIN 10529-2Title : Dosing apparatus for the oral medication of powdery or liqiud proprietary medicinal

products at farm livestock- Part 2: Dosing apparatus for liquid proprietary medicinal products for application about drinking water



Subsector C02: PAINTS AND RELATED PRODUCTS

Subsector : C02 Registration Date : 2011-07-21Organization : AENORCountry : Spain Latest Date for Comments : 2011-08-20Project ID : P0018734/0002 Draft for public enquiryICS :National Ref : PNE 48307Title : Paints and varnishes. Coatings for fuel tanks.Scope : This standard describes the characteristics of the coatings for fuel tanks.



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037817/0001 Project EstablishedICS :National Ref : PNE 84653Title : Cosmetic raw materials. Plant extracts. Marygold hydroglycolic extract (Caléndula

officinalis L.)Scope : This standard establishes the specifications required by the Marygold Hydroglycolic Extract

in cosmetic uses.


Subsector : C03 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037818/0001 Project EstablishedICS :National Ref : PNE 84651

Cosmetic raw materials. Plant extracts. Matricaria hydroglycolic extract (Chamomilla

Title : recutita (L.) Rauschert).Scope : This standard establishes the specifications required by the matricaria hydroglycolic extract

in cosmetic uses.


Subsector : C03 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037820/0001 Project EstablishedICS :National Ref : PNE 84654Title : Cosmetic raw materials. Plant extracts. Rosemary hydroglycolic extract (Rosmarinus

officinalis L.).Scope : This standard establishes the specifications required by the Rosemary Hydroglycolic Extract

in cosmetic uses.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038106/0001 Project EstablishedICS :National Ref : PNE 84632Title : Cosmetic raw materials. 2-Octyl-1-dodecanolScope : It specifies the requirements for 2-octyl-1-dodecanol used in cosmetic products.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038107/0001 Project EstablishedICS :National Ref : PNE 84628Title : Cosmetic raw materials. PEG-7 glyceryl cocoate.Scope : It establishes the specifications required by PEG-7 glyceryl cocoate to be used in cosmetic

products.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038108/0001 Project EstablishedICS :

National Ref : PNE 84609Title : Cosmetic raw materials. Myristyl myristate.Scope : It establishes the specification required by myristyl myristate to be used in cosmetic.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038109/0001 Project EstablishedICS :National Ref : PNE 84608Title : Cosmetic raw materials. Decyl oleate.Scope : It establishes the specification required by decyl oleate to be used in cosmetic.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038111/0001 Project EstablishedICS :National Ref : PNE 84139Title : Cosmetic raw materials. Polyethylenglycol-100 stearate.Scope : It establishes the specifications required by peg-100 stearate used in cosmetic products.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038112/0001 Project EstablishedICS :National Ref : PNE 84138Title : Cosmetic raw materials. Polyethylenglycol-40.Scope : It establishes the specifications required by peg-40 stearate used in cosmetic products.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038113/0001 Project EstablishedICS :National Ref : PNE 84136Title : Cosmetic raw materials. Polyethylenglycol-8 stearate.Scope : It establishes the specifications required by peg-8 stearate used in cosmetic products.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038114/0001 Project EstablishedICS :National Ref : PNE 84133Title : Cosmetic raw materials. Cetyl palmitate.Scope : It fixes the physic-chemical characteristics of cetyl palmitate.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038115/0001 Project EstablishedICS :National Ref : PNE 84046Title : Cosmetic raw materials. Myristyl alcohol.Scope : This standard describes the physic-chemical characteristics of the myristyl alcohol for

cosmetic use.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038116/0001 Project EstablishedICS :National Ref : PNE 84045Title : Cosmetic raw materials. Stearyl alcohol.Scope : This standard describes the physic-chemical characteristics of the stearyl alcohol for

cosmetic use.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038117/0001 Project EstablishedICS :National Ref : PNE 84012Title : Cosmetic raw materials. Sodium laurylsulfate 30%.Scope : This standard describes the physic-chemical characteristics of the sodium laurylsulfate 30%

for cosmetic use.


Subsector : C03 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038119/0001 Project EstablishedICS :National Ref : PNE 84008Title : Cosmetic raw materials. Cetyl alcohol.Scope : This standard describes the physic-chemical characteristics of the cetyl alcohol for cosmetic

use.



Subsector C13: FERTILIZERS

Subsector : C13 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023964/0001 Project EstablishedICS : 03.120.20, 13.030.40National Ref : ÖNORM S 2208Title : General requirements for the competence of testing laboratories for the analysis of

charge materials and products from biological waste treatment processesScope : This ÖNORM defines requirements for the competence of testing laboratories within the

framework of quality control of products and charge materials from biological waste treatment processes on the basis of ÖVE/ÖNORM EN ISO/IEC 17025, Annex B.


Subsector : C13 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038118/0001 Project EstablishedICS :National Ref : PNE 142404-1Title : Fertilizers. Requirements for labelling. Part 1: Labelling of simple solid inorganic

fertilizers with primary nutrient elements.Scope : This UNE standard specifies requirements for the labelling of solid inorganic or simple

mineral fertilizers with primary nutrient elements according to European Regulation.


Subsector : C13 Registration Date : 2011-07-28Organization : AENORCountry : Spain

Project ID : P0038121/0001 Project EstablishedICS :National Ref : PNE 142404-2Title : Fertilizers. Requirements for labelling. Part 2: Labelling of compound inorganic solid

fertilizers with primary nutrient elements.Scope : This UNE standard specifies requirements for the labelling of solid Inorganic or compound

mineral fertilizers with primary nutrient elements according to European Regulation.


Subsector : C13 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038122/0001 Project EstablishedICS :National Ref : PNE 142404-3Title : Fertilizers. Requirements for labelling. Part 3: Labelling for liquid inorganic fertilizers with

primary nutrient elements.Scope : This UNE standard specifies requirements for the labelling of liquid inorganic fertilizers with

primary nutrient elements according to European Regulation.


Subsector : C13 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038123/0001 Project EstablishedICS :National Ref : PNE 142404-4Title : Fertilizers. Requirements for labelling. Part 4: Labelling of inorganic fertilizers with

secondary nutrient elements.Scope : This UNE standard specifies requirements for the labelling of inorganic fertilizers with

secondary nutrient elements according to European Regulation.


Subsector : C13 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038124/0001 Project EstablishedICS :National Ref : PNE 142404-5Title : Fertilizers. Requirements for the labelling. Part 5: Labelling of inorganic fertilizers with

micronutrients.Scope : This UNE standard specifies requirements for the labelling of inorganic or mineral fertilizers

with micronutrient elements according to European Regulation.

Relatedness :National : REV/AMD UNE 142404-5:2005, UNE 142404-5:2005/1M:2007


Subsector C21: COSMETICS

Subsector : C21 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038059/0001 Project EstablishedICS :National Ref : PNE 84718Title : Cosmetic raw materials. Dentrifices. Tetrapotassium pyrophosphate.Scope : This standard fixes the physic-chemical characteristics of the tetrapotassium pyrophosphate

for cosmetic use.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F02: UNITS & SYMBOLS

Subsector : F02 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023955/0001 Project EstablishedICS : 01.060, 17.180.01National Ref : ÖNORM A 6437Title : Quantities and units - Light and other optical radiationsScope : This ÖNORM defines terms, symbols and definitions for the quantities and units of light and

other optical radiations as well as the terms and definitions of colorimetry.



Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 00900087/0001 Project EstablishedICS :National Ref : 00900087Title : Tests for reprographic use; fundamental assembly of typographical characters for

legibility tests and test chart for destination of resolving power



Subsector F09: BANKING

Subsector : F09 Registration Date : 2011-07-04Organization : BSICountry : United KingdomProject ID : 01101521/0001 Project EstablishedICS :National Ref : BS 8577Title : Financial advice and planning services. Specification



Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES

Subsector : F14 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037826/0001 Project EstablishedICS :National Ref : PNE 54117

Title : Recommendations for getting ready, handing and reception original for printing.Scope : This standard defines recommendations for getting ready, handing and reception original

for printing.



Subsector F16: GRAPHICAL SYMBOLS

Subsector : F16 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174963/0001 Project EstablishedICS :National Ref : PR NF X 08-070Title : Safety identification -



Subsector F19: OPTICS

Subsector : F19 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 02702397/0001 Project EstablishedICS :National Ref : 02702397Title : Fibre optics - Part 1: Terms and symbols


Subsector : F19 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 02702398/0001 Project EstablishedICS :National Ref : 02702398Title : Fibre optics - Part 2: Classification of fibre optic elements


Subsector : F19 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 02702399/0001 Project EstablishedICS :

National Ref : 02702399Title : Data sheet specification of fibre optic products - Part 6: Fibre optic cables



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2011-07-21Organization : AENORCountry : Spain Latest Date for Comments : 2011-08-30Project ID : P0033274/0002 Draft for public enquiryICS :National Ref : PNE 192001-2Title : Inspection procedure for establishments affected by major-accident hazards involving

dangerous substances. Part 2: Evaluation of the notificationScope : This standard establishes the methodology for evaluating the notification requested by the

Administration for Inspection in establishments affected by the Regulation of Serious Accidents were Dangerous Substances take part.


Subsector : F20 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037816/0001 Project EstablishedICS :National Ref : PNE 66926Title : Quality management systems. Particular requirements for the application of UNE-EN

ISO 9001:2000 to technical centers of digital tachographs.Scope : This standard establishes additional requirements for the implementation of UNE-EN ISO

9001 in the technical inspection and verification to technical centers of digital tachographs


Subsector : F20 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037876/0001 Project EstablishedICS :National Ref : PNE 66181Title : Quality management. Quality of virtual educationScope : It specifies quality aspects for training courses offered through virtual education, for both

education providers and clients



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2011-07-04Organization : BSI Draft Issue Date : 2011-06-27Country : United Kingdom Latest Date for Comments : 2011-08-31Project ID : 01003633/0001 Draft for public enquiryICS :National Ref : BS 10500Title : Specification for an anti-bribery management system (ABMS)


Subsector : F99 Registration Date : 2011-07-04Organization : BSICountry : United KingdomProject ID : 01101650/0001 Project EstablishedICS :National Ref : BS 8887-211Title : Design for manufacture, assembly, disassembly and end-of-life processing. Part 211.

Remarketing of computing hardware



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2011-07-04Organization : BSICountry : United KingdomProject ID : 01101620/0001 Project EstablishedICS :National Ref : BS 2483Title : Specification for overbed tables



Subsector H25: LARGE GAS APPLIANCES

Subsector : H25 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 04000244/0001 Project EstablishedICS : 97.040.10National Ref : DIN 18867-7Title : Equipment for commercial kitchens - Mobile equipment - Part 7: Food conveyors,

requirements and testing



Subsector H99: UNDETERMINED

Subsector : H99 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 04000240/0001 Project EstablishedICS :National Ref : 04000240Title : Methods for measuring of the energy use from equipment for commercial kitchens - Part

8: Regenerating systems



9: Cooking zones



10: Ice machines



1: Convection steamers



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023961/0001 Project EstablishedICS : 21.040.10National Ref : ÖNORM ISO 965-3Title : ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for

constructional threads (ISO 965-3:1998 + Cor. 1:2009)Scope : This part of ISO 965 specifies deviations for pitch and crest diameters for ISO general

purpose metric screw threads (M)conforming to ISO 261 having basic profile according to ISO 68-1. The deviations specified are derived from the fundamental deviations and tolerances specified in ISO 965-1.


Subsector : I02 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023962/0001 Project EstablishedICS : 21.060.10, 21.060.20National Ref : ÖNORM M 5025Title : Flat countersunk head square neck bolts with short square - Without nut and with

hexagonal nut - Metric ISO-threadScope : This ÖNORM defines requirements for flat countersunk head square neck bolts with short

square with a metric ISO-thread M10 and M12 in product crade C, without nut and with hexagonal nut.


Subsector : I02 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 2404B890/0001 Project EstablishedICS : 21.060.01National Ref : U2404B890Title : .Conical spring washers. Normal seriesScope : The standard specifies the dimensions and technical delivery conditions for steel conical

spring washers, normal series, designed for use for bolt/nut assemblies to avoid the loosening of coupled screws and nuts subjected to vibrations and to offset the setting of the assembled elements, expansions etc.


Subsector : I02 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 2404B900/0001 Project EstablishedICS : 21.060.01

National Ref : U2404B900Title : .Conical spring washers. Wide seriesScope : The standard specifies the dimensions, technical delivery conditions for steel conical spring

washers, wide series, designed for use for bolt/nut assemblies to avoid the loosening of coupled screws, nuts and bolts subjected to vibrations and to offset the setting of the assembled elements, expansions etc.


Subsector : I02 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 2404B910/0001 Project EstablishedICS : 21.060.01National Ref : U2404B910Title : Conical spring washers. Extralarge seriesScope : The standard specifies the dimensions, technical delivery conditions for steel conical spring

washers, extralarge series, designed for use for bolt/nut assemblies to avoid the loosening of coupled screws, nuts and bolts subjected to vibrations and to offset the setting of the assembled elements, expansions etc.


Subsector : I02 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 2404B920/0001 Project EstablishedICS : 21.060.01National Ref : U2404B920Title : Curved or crinkled open spring washers - General test methodsScope : The standard specifies the dimensions, technical delivery conditions for steel Curved spring

lock washers, designed for use for bolt/nut assemblies with property class that shall not exceed 8.8 with right or left thread to avoid the loosening of coupled screws, nuts and bolts subjected to vibrations and to offset the setting of the assembled elements, expansions etc.


Subsector : I02 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 2404B930/0001 Project EstablishedICS : 21.060.01National Ref : U2404B930Title : Single coil spring washer. Normal series - General test methodsScope : The standard specifies the dimensions, technical delivery conditions for steel spring lock

washers, normal series, designed for use for bolt/nut assemblies with property class that shall not exceed 5.8 with right thread to avoid the loosening of coupled screws, nuts and bolts subjected to vibrations and to offset the setting of the assembled elements, expansions etc.



Subsector I05: IRON PIPES

Subsector : I05 Registration Date : 2011-07-12Organization : PKNCountry : PolandProject ID : 00278343/0001 Project EstablishedICS : 91.140.60National Ref : prPN-M-75002Title : Fittings for water pipe installations and central heating armature - Requirements and

testsScope : The scope of standard will be the requirements and tests for fittings used in water pipe

installations and central heating of buildings, with nominal pressure of 1.0 MPa. The standard can be applied in the design, production, certification and operation of plumbing fixtures and central heating



Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 12101865/0001 Project EstablishedICS :National Ref : 12101865Title : Tools for pressing - Guide pillars, type D


Subsector : I09 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 12800233/0001 Project EstablishedICS :National Ref : 12800233Title : Tabular layouts of properties - Part 81: Drills and countersinking tools with non-

indexable cutting edges



Subsector I13: GAS CONTAINERS

Subsector : I13 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA175079/0001 Project EstablishedICS :National Ref : NF E29-684Title : Cônes filetés d'assemblage des robinets - Diamètre nominal 26 - Conicité 1/16 - Cône 3

degrés 34 minutes - Pas 1,814 NPT



Subsector I18: MINING

Subsector : I18 Registration Date : 2011-07-01Organization : PKNCountry : PolandProject ID : 00027593/0001 Project EstablishedICS : 73.100.20National Ref : prPN-G-44200Title : Mining -- Method for determining methane content in coal seamsScope : Describes procedures of determination of methane content in coal seams. Specifies both

procedures of taking samples of coal in the mine and samples examination for determining methane content in the laboratory


Subsector : I18 Registration Date : 2011-07-01Organization : PKNCountry : PolandProject ID : 00127195/0001 Project EstablishedICS : 77.140.10, 77.140.20National Ref : prPN-H-84042:2009/Az1Title : Microalloyed steels for shapes and accesories used in mining industryScope : Modifies chemical composition and increases mechanical properties for the steel grade

S480



Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023965/0001 Project EstablishedICS : 11.040.60National Ref : ÖNORM S 5290-2Title : Medical electron accelerators - Part 2: Constancy tests in intensity-modulated radiation

therapy

Scope : This Austrian Standard applies for constancy test and related test conditions as well as test frequencies for systems of intensity-modulated radiation therapy with high energy photon radiation and isocentrical gantry to determine changes in these quality indicators during the whole useful life.



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M05: WELDING

Subsector : M05 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA175087/0001 Project EstablishedICS :National Ref : XP A 87-005Title : Thermal cutting - Classification of thermal cuts - Geometrical product specification and

quality tolerances



Subsector M10: METALLIC COATINGS

Subsector : M10 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 68002440/0001 Project EstablishedICS : 25.220.50National Ref : U68002440Title : Vitreous and porcelain enamels - Enamelled grids and burner caps - Quality

requirements and methods of testScope : This standard specifies the requirements to be satisfied by enamelled steel or cast iron grids

and burners caps. It also spefifies the methods of test.



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038092/0001 Project EstablishedICS :National Ref : PNE 57073Title : Paper and board. Water absorbency determination for absorbent papers (Drop test)Scope : This standard determines the water speed absorbency in paper and board.



Subsector N02: SOLID FUELS

Subsector : N02 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 0209C910/0001 Project EstablishedICS : 27.190National Ref : E0209C910Title : Biofuels and bioliquids - Mass balance managementScope : This Technical Specification defines the essential requirements for the management of the

mass balance within the framework of Red and FQD. This Technical Specification can be applied by any economic operator acting in the chain of production of biofuels and bioliquids. It is designed in a flexible manner in order to allow also agricultural operators to achieve the identified goals.



Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2011-07-19Organization : SIST Draft Issue Date : 2011-09-01Country : Slovenia Latest Date for Comments : 2011-11-01Project ID : 00005420/0001 Project EstablishedICS : 75.160National Ref : oSIST 1011:2011Title : Liquid petroleum products - Fuel oil extra light - Requirements and test methodsScope : Comparing with SIST 1011:2009 the new issue has added Fuel oil extra light without

sulphur. There is no European and international standard in this field, so members of SIST/TC NAD has decided to prepare a national standard.


Subsector : N03 Registration Date : 2011-07-14Organization : TSECountry : Turkey

Project ID : t0012153/0001 Project EstablishedICS : 75.100National Ref :Title : Lubricants,industrial oils and related products-Class L- Moulding oils Scope : This standard covers moulding oils of lubricating oils, industrial oils and related products.



Subsector N04: REFRACTORIES

Subsector : N04 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174788/0001 Project EstablishedICS :National Ref : PR NF B40-308Title : Refractory products - Determination of thermal expansion at high temperature


Subsector : N04 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174789/0001 Project EstablishedICS :National Ref : NF B40-309 PRTitle : Refractory products - Determination of bulk density, open porosity and total porosity of

granular materials


Subsector : N04 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174790/0001 Project EstablishedICS :National Ref : PR NF B40-311Title : Refractory products - Dense shaped insulating products - Determination of resonance

frequency by mechanical shock


Subsector : N04 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174791/0001 Project EstablishedICS :

National Ref : PR NF B40-007Title : Insulating shaped products - Classification


Subsector : N04 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174792/0001 Project EstablishedICS :National Ref : PR NF B40-379Title : Refractory products. Prepared unshaped materials. Control of castables refractories

dense and insulating.


Subsector : N04 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174794/0001 Project EstablishedICS :National Ref : PR NF B40-380Title : Refractory products. Prepared unshaped materials. Dense and insulating hydraulic

cements. Determination of limited temperature of using.


Subsector : N04 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174795/0001 Project EstablishedICS :National Ref : PR NF B40-312Title : Refractory products. Dense, insulating shaped products. Determination of ultrasonic

propagation velocity in transmission.


Subsector : N04 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174796/0001 Project EstablishedICS :National Ref : PR NF B40-378Title : Refractory products. Unshaped materials. Control of the aptitude of gunning for

castables dense and insulating.



Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037877/0001 Project EstablishedICS :National Ref : PNE 40904Title : Safety of children´s garments. Safety of children´s clothing accessories. Specifications.Scope : This standard specifies safety requirements, and the corresponding test methods, for items

to be dressed hanged or taken by children up to 14 years old. This Standard does not apply to children's clothing This standard applies to accessories of clothing such as hats, caps, gloves, scarves, socks and other clothing accessories for all children up to 14 years old. This standard does not apply to accessories which does not contain textile materials.



Subsector N07: SAWN TIMBER

Subsector : N07 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174964/0001 Project EstablishedICS :National Ref : PR NF P03-201Title : Technical diagnosis - Statement of building relating to the presence of termites

Relatedness :National : REV/AMD XP P03-201:200709 (P03-201)


Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174748/0001 Project EstablishedICS :National Ref : PR NF T57-950-1Title : Sandwich panels for industrial road transport bodywork and fixed cells . Part 1:

Acceptability criteria for sandwich panels with composite skins



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2011-07-20Organization : UNICountry : ItalyProject ID : 1325D335/0001 Project EstablishedICS : 13.030.50National Ref : E1325D335Title : Plastic raw-secondary materials - Plasticized Polyvinylchloride for general purpose, from

the recycling of industrial residues and/or from pre and/or post consumer materials - Part 5: Requirements and test methods

Scope : This standard applies to raw-secondary materials from recycling of industrial waste and / or materials from and / or post-consumer, defines the requirements and test methods of plasticized polyvinyl chloride (R PVC-P ) designed for different uses.


Subsector : N14 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037863/0001 Project EstablishedICS :National Ref : PNE 53937-2Title : Equipment for fusion joining of polyethylene pipes and fittings for gas supply systems.

Part 2: ElectrofusionScope : This standard specifies requirements for welding machines by electrofusion used for fusion

joining of polyethylene pipes and fittings for gas supply systems


Subsector : N14 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037864/0001 Project EstablishedICS :National Ref : PNE 53937-1Title : Equipment for fusion jointing polyethylene systems for gas supply systems. Part 1: Butt

fusionScope : This standard specifies requirements for welding machines by butt fusion used for fusion

joining of polyethylene pipes and fittings for gas supply systems



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023958/0001 Project EstablishedICS : 91.120.20National Ref : ÖNORM B 8115-7Title : Sound insulation and room acoustics in building construction - Part 7: Rating of impact

sound insulation by floor coverings on a standard solid timber floor Scope : This Standard describes the method for rating of evaluated impact sound insulation of floor

coverings on solid timber floors. The method for rating of evaluated impact sound insulation on timber joist floors deltaLt,w is specified in ÖNORM EN ISO 10140-5 respectively in ÖNORM EN ISO 717-2.


Subsector : S01 Registration Date : 2011-07-18Organization : NBNCountry : BelgiumProject ID : BE054428/0001 Draft for public enquiryICS : 17.140, 17.160National Ref : NBN S 01-400-2Title : Acoustic criteria for school buildings


Subsector : S01 Registration Date : 2011-07-25Organization : AFNORCountry : FranceProject ID : FA174749/0001 Project EstablishedICS :National Ref : PR XP S31-200Title : Acoustics - Determination sound level of road vehicles when delivering - Impact during

night and classification into recommended areas



Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2011-07-20Organization : HZNCountry : CroatiaProject ID : 00556142/0002 Draft for public enquiryICS : 13.340.60National Ref : nHRN 1131Title : Personal protectiv equipment against falls from a height - Steel Climbing Devices for

Wooden Posts

Relatedness :

National : New

Subsector : S04 Registration Date : 2011-07-04Organization : BSICountry : United KingdomProject ID : 01101623/0001 Project EstablishedICS :National Ref : BS 7971-1Title : Protective clothing and equipment for use in violent situations and in training. Part 1.

General requirements



Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment



Personal defence shields. Requirements and test methods



Blunt trauma torso, limb, shoulder, abdomen, genital protectors. Requirements and test methods


Subsector : S04 Registration Date : 2011-07-04Organization : BSICountry : United KingdomProject ID : 01101627/0001 Project EstablishedICS :National Ref : BS 7971-5Title : Protective clothing and equipment for use in violent situations and in t raining. Part 5.

Footwear, foot and ankle protectors. Requirements and test methods



Gloves for protection against mechanical, thermal and chemical h azards. Requirements and test methods



Slash resistant gloves. Requirements and test methods



Training suits and equipment. Requirements and test methods


Subsector : S04 Registration Date : 2011-07-04Organization : BSICountry : United Kingdom

Project ID : 01101631/0001 Project EstablishedICS :National Ref : BS 7971-10Title : Protective clothing and equipment for use in violent situations and in training. Part 10.

Coveralls. Requirements and test methods



Subsector S05: DENTISTRY

Subsector : S05 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 01402111/0001 Project EstablishedICS :National Ref : 01402111Title : Dentistry - Colour measurments for dental ceramics - Part 1: Colour rings for colour

determination


Subsector : S05 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 01402112/0001 Project EstablishedICS :National Ref : 01402112Title : Dentistry - Test methods


Subsector : S05 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 01402113/0001 Project EstablishedICS :National Ref : 01402113Title : Dentistry - Instruments for manual preparation of implant bed



Subsector S06: VIBRATION & SHOCK

Subsector : S06 Registration Date : 2011-07-20Organization : HZNCountry : Croatia

Project ID : 00108067/0001 Project EstablishedICS : 91.120.25National Ref : nHRN DIN 4150-1Title : Vibration in buildings - Part 1: Prediction of vibration parameters


Subsector : S06 Registration Date : 2011-07-20Organization : HZNCountry : CroatiaProject ID : 00108068/0001 Project EstablishedICS : 91.120.25National Ref : nHRN DIN 4150-2Title : Vibration in buildings - Part 2: Effects on persons in buildings


Subsector : S06 Registration Date : 2011-07-20Organization : HZNCountry : CroatiaProject ID : 00108069/0001 Project EstablishedICS : 91.120.25National Ref : nHRN DIN 4150-3Title : Vibration in buildings - Part 3: Effects on structures



Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023963/0001 Project EstablishedICS : 07.060, 13.040.99National Ref : ÖNORM M 9490-10Title : Meteorological measurements for purposes of air pollution control - Part 10:

Measurement of turbulence parametersScope : This Austrian Standard describes the continuous measurement of turbulence parameters

with three-dimensional ultrasonic anemometers.


Subsector : S08 Registration Date : 2011-07-22Organization : PKNCountry : PolandProject ID : 00159231/0001 Project EstablishedICS : 13.040.30

National Ref : prPN-Z-04252-2Title : Air purity protection -- Tests for content of components of liquefied petroleum gas -- Part

2: Determination of propane in workplaces by gas chromatographyScope : This standard gives a method for the determination of the content of propane ( CAS:

74-98-6) in workplaces air by gas chromatography with a flame ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of propane which can be determined by the method in the sampling and determination conditions specified is 180 mg/m3


Subsector : S08 Registration Date : 2011-07-22Organization : PKNCountry : PolandProject ID : 00159232/0001 Project EstablishedICS : 13.040.30National Ref : prPN-Z-04252-3Title : Air purity protection -- Tests for content of components of liquefied petroleum gas -- Part

3: Determination of n-butane in workplaces by gas chromatographyScope : This standard gives a method for the determination of the content of n-butane ( CAS:

106-97-8) in workplaces air by gas chromatography with a flame ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of n-butane which can be determined by the method in the sampling and determination conditions specified is 190 mg/m3


Subsector : S08 Registration Date : 2011-07-22Organization : PKNCountry : PolandProject ID : 00159233/0001 Project EstablishedICS : 13.040.30National Ref : prPN-Z-04263-2Title : Air purity protection -- Tests for content of aluminium and its compounds -- Part 2:

Determination of aluminium and its compounds in work places by flame atomic absorption spectrometry method

Scope : This standard gives a method for the determination of the content of aluminium ( CAS: 7429-90-5) and its compounds in workplaces air by flame atomic absorption spectrometry. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of aluminium which can be determined by the method in the sampling and determination conditions specified is 0,07 mg/m3


Subsector : S08 Registration Date : 2011-07-22Organization : PKNCountry : PolandProject ID : 00159234/0001 Project EstablishedICS : 13.040.30National Ref : prPN-Z-04013-4

Title : Air purity protection -- Tests for beryllium and its compounds -- Part 4: Determination of beryllium and its compounds in work places by atomic absorption spectrometry with graphite tube

Scope : This standard gives a method for the determination of the content of beryllium ( CAS: 7440-41-7) and its compounds in workplaces air by atomic absorption spectrometry method. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of beryllium which can be determined by the method in the sampling and determination conditions specified is about 0,00002 mg/m3 (for air volume 720 l)


Subsector : S08 Registration Date : 2011-07-22Organization : PKNCountry : PolandProject ID : 00159235/0001 Project EstablishedICS : 13.040.30National Ref : prPN-Z-04439Title : Air purity protection -- Determination of 1,2-epoxy-3-phenoxypropane in workplaces by

gas chromatographyScope : This standard gives a method for the determination of the content of 1,2-epoxy-3-

phenoxypropane (CAS: 122-60-1) in workplaces air by gas chromatography with a flame ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of 1,2-epoxy-3-phenoxypropane which can be determined by the method in the sampling and determination conditions specified is 0,06 mg/m3


Subsector : S08 Registration Date : 2011-07-22Organization : PKNCountry : PolandProject ID : 00159236/0001 Project EstablishedICS : 13.040.30National Ref : prPN-Z-04440Title : Air purity protection -- Determination of orthosilicate tetraethyl in workplaces by gas

chromatographyScope : This standard gives a method for the determination of the content of orthosilicate

tetraethyl (CAS: 78-10-4) in workplaces air by gas chromatography with a flame ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of orthosilicate tetraethyl which can be determined by the method in the sampling and determination conditions specified is 7,82 mg/m3


Subsector : S08 Registration Date : 2011-07-22Organization : PKNCountry : PolandProject ID : 00159237/0001 Project EstablishedICS : 13.040.30National Ref : prPN-Z-04024-4

Title : Air purity protection -- Tests for barium and its compounds -- Part 4: Determination of barium and its soluble compounds in work places by flame atomic absorption spectrometry

Scope : This standard gives a method for the determination of the content of barium ( CAS: 7440-39-3) and its soluble compounds in workplaces air by flame atomic absorption spectrometry method. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of barium which can be determined by the method in the sampling and determination conditions specified is 0,035 mg/m3 (for air volume 720 l)


Subsector : S08 Registration Date : 2011-07-22Organization : PKNCountry : PolandProject ID : 00159238/0001 Project EstablishedICS : 13.040.30National Ref : prPN-Z-04216-3Title : Air purity protection -- Tests for content of silver and its compounds -- Part 3:

Determination of silver and its compounds in work places by flame atomic absorption spectrometry method

Scope : This standard gives a method for the determination of the content of silver ( CAS: 7440-22-4) and its compounds in workplaces air by flame atomic absorption spectrometry. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of silver which can be determined by the method in the sampling and determination conditions specified is 0,003 mg/m3


Subsector : S08 Registration Date : 2011-07-06Organization : NENCountry : NetherlandsProject ID : 50001672/0001 Project EstablishedICS : 13.040.99National Ref : NTA 9065:2011 Concept nlTitle : Air quality - Odour - Odour measurement and calculationScope : NTA Meten en rekenen geur is based on the document Meten en rekenen geur (1994)



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 11903195/0001 Project EstablishedICS :National Ref : 11903195Title : Treatment of spent filter backwash water from systems for treatment of water of

swimming-pools and baths



Subsector S17: RESPIRATORY PROTECTIVE DEVICES

Subsector : S17 Registration Date : 2011-07-15Organization : DINCountry : GermanyProject ID : 02702396/0001 Project EstablishedICS :National Ref : 02702396Title : Respiratory protective devices - Full face masks connected with fire fighters head

protection for use as a part of a respiratory protective device



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2011-07-04Organization : BSICountry : United KingdomProject ID : 01101637/0001 Project EstablishedICS :National Ref : BS SP 13-16Title : Specification for washers for aircraft purposes (primarily for packing purposes)


Subsector : T02 Registration Date : 2011-07-04Organization : BSICountry : United KingdomProject ID : 01101729/0001 Project EstablishedICS :National Ref : BS 2A 260-2A 265:2010+C1Title : Aerospace series. Specification for pan and 100 degree countersunk slotted head

screws with ISO metric screw threads. Corrigendum



Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023967/0001 Project EstablishedICS : 43.120National Ref : ONR 225007Title : Electrically propelled road vehicles - Survey of standards and specification Scope : This ONR facilitates the correct selection of standards and specifications for electrically

propelled road vehicles (electric vehicles).



Subsector T07: GLASS CONTAINERS

Subsector : T07 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0037990/0001 Project EstablishedICS :National Ref : PNE 126406Title : Glass containers. Mouths. Mouth finishes for 29 mm crown cap closures for cava, cider

Title : and granvas bottles.Scope : It establishes the mouth finish types adequate for cava, cider and granvas bottles with 29

mm crown cap closures



Subsector T08: CRANES

Subsector : T08 Registration Date : 2011-07-19Organization : MSZT Draft Issue Date : 2011-10-19Country : HungaryProject ID : 34831510/0001 Project EstablishedICS : 53.020.20National Ref :Title : Periodiccal controlling of lifting equipment. Part 3: Mobil crane

Relatedness :National : REV/AMD MSZ 9721-3

Subsector : T08 Registration Date : 2011-07-21Organization : AENORCountry : Spain Latest Date for Comments : 2011-08-20Project ID : P0021441/0002 Draft for public enquiryICS :National Ref : PNE 58101-1Title : Heavy lifting equipment. Strenght and safety conditions for dismountable tower cranes

for building works. Part 1: Design and manufacturing conditionsScope : The aim of these Standards is to define the safety requirements for the constructor and use

of tower cranes. This Part 1 reports the qualities about desing and manufacture.



for building works. Part 2: Installations and utilization conditionsScope : The aim of these Standards is to define the safety requirements for the constructor and use

of tower cranes. This Part 2 reports the conditions about installation and use.


Subsector : T08 Registration Date : 2011-07-21Organization : AENORCountry : Spain Latest Date for Comments : 2011-08-20

Project ID : P0021443/0002 Draft for public enquiryICS :National Ref : PNE 58101-3Title : Heavy lifting equipment. Strenght and safety conditions for dismountable tower cranes

for building works. Part 3: DocumentationScope : The aim of these Standards is to define the safety requirements for the constructor and use

of tower cranes. This Part 3 reports about documentation.



for building works. Part 4: VocabularyScope : The aim of these Standards is to define the safety requirements for the constructor and use

of tower cranes. This Part 4 reports about the vocabulary of the tower crane.



Subsector T12: INDUSTRIAL TRUCKS

Subsector : T12 Registration Date : 2011-07-19Organization : MSZT Draft Issue Date : 2011-10-19Country : HungaryProject ID : 34831511/0001 Project EstablishedICS : 53.020.20National Ref :Title : Periodiccal controlling of lifting equipment. Part 4: Engine powered trucks

Relatedness :National : REV/AMD MSZ 9721-4


Subsector T14: PACKAGING

Subsector : T14 Registration Date : 2011-07-08Organization : ASICountry : AustriaProject ID : 00023956/0001 Project EstablishedICS : 55.040, 85.060National Ref : ÖNORM A 5504Title : Packaging testing - Puncture test for board and corrugated fibreboard by pendulum

impact testing machineScope : This Austrian Standard contains provisions for execution of the puncture test for board and

corrugated fibreboard by pendulum impact testing machine for packaging.

Relatedness :

National : New

Subsector : T14 Registration Date : 2011-07-01Organization : AENORCountry : SpainProject ID : P0037921/0001 Project EstablishedICS :National Ref : PNE 58014Title : Steel static storage Systems. Validation of storage equipmentScope : Validation of storage systems manufactured on steel for industrial installations. This

standard must be applied in conjunction with EN 15512, EN 15620, EN 15629, EN 15635, EN 15878 and UNE 58013.



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038103/0001 Project EstablishedICS :National Ref : PNE 199041-1Title : Road Traffic Management Equipment. Multiservice Communications Network. Part 1:

Specifications and usage scenariosScope : This standard establishes the recommendations for the deployment of an inter-city road

traffic management multiservice communications network transporting video, audio and data signals


Subsector : T19 Registration Date : 2011-07-28Organization : AENORCountry : SpainProject ID : P0038104/0001 Project EstablishedICS :National Ref : PNE 199041-2Title : Road Traffic Management Equipment. Multiservice Communications Network. Part 2:

Concessionaires interconnections recommendationsScope : This standard describes the recommendations for the interconnection of the road

concessionaries networks with a general inter-city road management multiservice communications network



** End of Sector **




Sector X : UNDETERMINED STANDARDIZATION AREA


Subsector X02: UNDETERMINED STANDARDIZATION AREA

Subsector : X02 Registration Date : 2011-07-21Organization : AENORCountry : Spain Latest Date for Comments : 2011-08-10Project ID : P0037821/0002 Draft for public enquiryICS :National Ref : PNE 133300Title : Information on content for Digital Terrestrial Television BroadcastingScope : The purpose of this document is to expound upon the agreement on minimum terms

reached to date by the sectoral agents with regard to the standardization of information and the treatment of televised content.



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

monthly notifications register · information procedure page 1 monthly notifications register...

Documents