Manufacturing Plant and Distribution.

Ulsan, South Korea

IndustryWorldWideElectric.net DRIVING & Controlling

Motor & Drive SolutionsHyundai Heavy industries

by

General Purpose

UL Explosion Proof

Severe Duty Large HP

Severe Duty IEEE-841

Medium Voltage TEFC

Variable Frequency drives

Motor & Drive SolutionsHyundai Heavy Industries

HYUNDAI Crown Triton™ Series

Two leading BrandsHYUNDAI is known globally for their quality and reliability. All HYUNDAI products are manufactured in HYUNDAI’s world class factory located in Ulsan, South Korea.WorldWide Electric is an exclusive distributor of HYUNDAI Electric Motors and Drives. We stock over $25 million worth of products in our warehouses across the USA.

General Purpose | TEFC | Premium Efficiency

UL Explosion Proof | Premium Efficiency

by

The HYUNDAI Crown Triton General Purpose TEFC motor was developed using Finite Element Analysis and computer aided design methods in order to produce a motor that delivers quality, reliability and efficiency at a reasonable price.

Crown Triton™ Series

- NEMA design B - Class F insulation, Class N varnish- Class B temperature rise- Low temperature rise design will allow rating above 40°C ambient and altitudes above 3,300 feet at 1.0 SF- Quiet running and low vibration- F1 mounting (F2 modifiable)- Class I, Division II, Groups A, B, C, D- Stock includes T, TC and TSC frames- C and D-flange kits available- 3 year warranty

- 1-250 HP; 143T-449T- 3600, 1800 and 1200 RPM- 208-230/460 volt (460 volt for 150 HP and above)- Premium efficiency, meets or exceeds EISA 2007 regulations- TEFC enclosure, rigid cast iron construction- Inverter ready, 10:1 CT / 20:1 VT- 1.15 SF at 40°C, 1.0 SF at 65°C- Wye-delta start capability from 15-250 HP

- 1-250 HP; 143T-449T- 3600, 1800 and 1200 RPM- 208-230/460 volt (460 volt for 150 HP and above)- Premium efficiency, meets or exceeds EISA 2007 regulations- TEXP enclosure, rigid cast iron construction- IXHHI models inverter rated, • 4:1 CT (Constant) • 10:1 CT (Intermittent-1 Hour) • 10:1 VT- 1.15 SF- Wye-delta start capability from 15-250 HP- NEMA design B - Class F insulation, Class N varnish- Class B temperature rise

- Quiet running and low vibration- F1 mounting- Class I, Division I, Groups C, D- Suitable for use in 40°C or 55°C ambient locations • 140T-210T: T2C at 40°C, T2B at 55°C (T4 when thermostat connected) • 250T-280T: T2D at 40°C, T2C at 55°C (T4 when thermostat connected) • 320T-444T: T3 at 40°C, T2D at 55°C (T4 when thermostat connected) • 445T-449T: T3 at 40°C, T2D at 55°C (T4 when thermostat connected and 1.0 SF)- Stock insludes T, TC and TSC frames- 3 year warranty

Severe Duty | Large HP | Premium Efficiency

Severe Duty | IEEE-841 | Premium Efficiency

for optimum reliability and performance in applications where down time is not an option.

- 250-600 HP; L449T/TS and 5000- 3600, 1800 and 1200 RPM- 460 volt- Premium efficiency- TEFC enclosure, IP55 degree of protection- Inverter ready, 10:1 CT / 20:1 VT- Spike resistant wire per NEMA MG-1, Part 31- 1.15 SF at 40°C

- Class F insulation, Class N varnish- Class B temperature rise- 50/60 Hz on nameplate with CE mark- Double-drilled feet to accomodate mounting flexibility- CSA Certified for Class I, Division II, Groups A, B, C, D- 4140 shaft for L449T, 1800 and 1200 RPM motors- 3 year warranty

- 1-250 HP; 143T-449T- 3600, 1800 and 1200 RPM- 460 volt- Premium efficiency, meets or exceeds EISA 2007 regulations- Full compliance with IEEE-841 2009 standards- Fully tested per IEEE 112, method B and includes a test report for each motor- TEFC enclosure, rigid cast iron construction including fan covers and inner bearing caps- Inverter duty, 10:1 CT / 1000:1 VT- Spike resistant wire per NEMA MG-1, Part 31- 1.15 SF at 40°C, 1.0 SF at 65°C- NEMA design B - Class F insulation, Class N varnish- Class B temperature rise- Class I, Division II, Groups A, B, C, D

- Severe duty, corrosion resistant paint system on frame and rotor with epoxy resin on the windings- Stainless steel condensation T drain plugs on drive-end as well as non drive-end- Two ground lugs, one in the junction box and one on the frame- Neoprene lead separator and heavy duty junction box gasket keep contaminants out- ProTechTM PTFE bearing isolators on both bearings • IP66 UL tested for dust and water/chemical exclusion • Resistant to 160 chemicals versus 11 for bronze • A true non-contact seal, will not wear out, does not need to be lubricated- Precision balance and foot flatness per IEEE-841- Oversized, regreasable, vacuum de-gassed bearings- Pre-lubricated with Mobil PolyrexTM EM premium grease- 5 year warranty

HYUNDAI HLE5™ Series Medium Voltage

Medium Voltage | TEFC | Stock Products

Medium Voltage | Non-Stock Products

We carry a large range of Hyundai TEFC enclosed medium voltage motors, from 350-1000 HPin 3600, 1800, 1200 and 900 RPM. All motors come with copper bar rotors, space heaters and 100 ohm winding RTDs. Motors are rated for 2300/4160 volts, 60 Hz, 1.15 service factor andare available in NEMA standard 5000, 5800 and 6800 series frames.

WorldWideElectric.net

In addition to the Hyundai stock medium voltage motors we can supply custom motors up to 30,000 HP in various enclosures, speeds, voltages and mounting configurations.

Sales: +1 (800) 808-2131

- 350-1,000 HP; 447T-6810- 3600, 1800, 1200 and 900 RPM- Dual voltage 2300/4160 volt, 60 Hz- Premium efficiency- TEFC enclosure, rigid frame- Copper bar rotors, induction brazed end rings- Inverter rated, 2:1 CT / 4:1 VT- 1.15 SF at 40°C- NEMA design B- Class F, VPI insulation system- Class B temperature rise

- Ball and roller bearing units in stock- Multiple 2F mounting holes- Threaded holes for vertical screw jacks- 100 ohm platinum stator RTDs (2 per phase)- 120 volt space heaters- Oversized main terminal box with pressure relief baffle- Frame and terminal box grounding provisions- 1 year warranty

Sales: +1 (800) 808-2131

Variable Frequency Drives

HYUNDAI N700E™ SeriesThe HYUNDAI N700E Series High Performance Drives offer powerful control solutions with exceptional speed control and torque response which provides superior vector performance. The N700E’s compact size and sensorless vector control technology provides perfectly optimized performance for industrial and commercial applications.

Enclosed Drives Also

Available

WorldWideElectric.net

- 230 volt single-phase, 0.5-3 HP- 230 volt three-phase, 0.5-25 HP- 460 volt three-phase, 0.5-500 HP- NEMA 12 and 3R enclosures available- Single-phase capable on all voltages and sizes- Sensorless Vector Control- 0.01-400 Hz- Selectable overload- 150% overload for one minute for CT applications- 120% overload for one minute for VT applications- 3000 second accel / decel- DC braking- Auto-tuning- BDR brake function- AVR function- Sixteen level multi-speed- Adjustable carrier frequency- PID control- Frequency jump- Analog gain bias- Jog run- Electronic thermal overload- Auto-torque boost, trip history monitor and software lock- Intelligent input function- 50°C ambient- RS485 – Modbus communications- 2 year warranty

WorldWide Electric Corporation | 3540 Winton Place, Rochester, NY 14623 USADistribution Centers | Atlanta, GA | Dallas, TX | Indianapolis, IN | Los Angeles, CA

PRO018MDWAE0216

Our Doors are OpenContact our professional sales, application, and technical support

team 24x7, or visit us online before purchasing your next motor, motor control or drive package... You won’t be disappointed.

1 (800) 808-2131

WorldWideElectric.net