motor vehicle engineering static and dynamic balancing apparatus •experimental module for...
TRANSCRIPT
12/12/2013
1
Motor Vehicle Engineering
25
The main courses in this stream are:
IC Engine & Reciprocating Machine
Motor Vehicle Engineering
Automotive Maintenance
Construction Equipment
It deals with the design and maintenance of a motor
vehicle and its accessories.
26
12/12/2013
2
Railway Engineering
27
It deals with design, manufacture, operation,
management, control and maintenance of all forms of
railway and related equipments and industrial
systems.
The profession plays a vital role in the establishment
and sustainable operation of transport systems to
boost the economy of the country in all aspects.
The main courses in this stream are:
Fundamentals of Railway systems Engineering
Rail Motive Power
Rail Vehicle Design28
12/12/2013
3
The main courses in this stream are:
Fundamentals of Railway systems Engineering
Rail Motive Power
Rail Vehicle Design
29
Computing Facilities
• Two computer centers one for postgraduate program
and the other for undergratuate. The two computer
centers have 30 computers each. The following
softwares are available:
– Algor FEM Analysis
– Ansys (FEA), Fluent CFD
– PROE Engineer ,Solid works,CATIA,Visual Studio
– Matlab
– Flex, Flint and LPA prolog expert system development tools.
5. Facilities
30
12/12/2013
4
Computer center in the department31
The Mechanical Engineering Department has the following
fully occupied laboratories to support the education and
research activities that it undertakes.
Fluid Machine and Thermal Laboratory
Hydraulic and Pneumatic Machines Laboratory
Materials Testing Laboratory
Applied Mechanics and Control Laboratory and
Mechatronics Laboratory
32
12/12/2013
5
Fluid Machine and Thermal Laboratory
Some of the equipments available for the education in this
laboratory are:
– Boiler simulator with checks and fault generation
– Velocity distribution and pressure drop in circular duct
– Combustion chamber
– Air conditioning test stet-up
– Small wind tunnel
– Ultrasonic flow meters
33
Boiler Simulator Air Conditioning Test Unit
Laboratories
34
12/12/2013
6
Hydraulic and Pneumatic Machines Laboratory
Hydraulic and Pneumatic Machines Laboratory is
equipped with the following equipments:
• Flow measurement with nozzles and orifice
• Cooling tower
• Pipe friction test set-up
• Banki Turbine Test Bench
• Pelton Turbine Test bench
• Francis Turbine Test bench
• Centrifugal pump Test bench
35
Turbine test bench36
12/12/2013
8
Applied Mechanics Laboratory
In this Laboratory we have the following equipments:
• Gyroscope
• Static and dynamic balancing apparatus
• Experimental module for journal bearing pressure
distributor.
• Balance of reciprocating masses
• Whirling of shaft apparatus
• Cam-follower mechanism
• Cut- way models for worm, spur and bevel gears.
• Lathe gearing layout demonstrator.
• Cut way model for electromagnetic single disk break.
39
Balance of reciprocating masses 40
12/12/2013
9
Cut way models of gear box
41
Mechatronics Laboratory
Some of the equipments in this Lab are:
– Temperature control unit
– Pneumatic Trainers
– Hydraulic Trainers
– Electro-Pneumatic Trainers
– Electro-Pneumatic Trainers
– PLC module
Some of the equipments are shown below:
42
12/12/2013
10
PLC Module Pneumatic Trainers
Hydraulic Trainer43
Materials Testing Laboratory
Some of the equipments in this lab are:
Compact spark emission spectrometer for paid
analysis of metals
Computer-Electro hydraulic universal testing
machine (maximum load 600kN)
Metallographic analysis microscope with camera
Metallographic microscope
Tensile testing machine
Hardness Tester
Impact test machine
Pictures of some of these equipments are shown below:44
12/12/2013
11
Compact Spark Emission Spectrometer for Paid
Analysis of Metals
45
Computer-Electro hydraulic
universal testing machine (maximum load 600kN)46
12/12/2013
12
Microscope47
Automotive Laboratory
The automotive laboratory is equipped with the
following equipments:Diesel car chassis with front engine and rear drive
16 valve multipoint electronic injection four cylinder engine
electrically operated
Diesel engine (for car and lorry)
Automotive electric system with fault finding facilities
Injection system
Injection distributor
Light system demonstration board
Oil pump with filter
Diesel electro-injector
Downdraft carburetor manual choke
Some of the equipments in this laboratory are shown below:
48
12/12/2013
13
16 Valve Multistage Electronic Injection
Four Cylinder Engine (Electrically Operated) 49
Diesel Car Chassis with Front Engine and Rear Drive
50
12/12/2013
14
Manufacturing Workshop
The workshop is equipped with nearly all general purpose
machinery necessary for manufacturing of small machineries
and equipment. It has a huge soil tonnage hydraulic press for
metal forming, 20 kg casting furnace, 5 lathe machines, 2
milling machines, 2 arc welding machines and 2 flame welding
machines , CNC Lathe machines ,CNC milling machines are
available.
Some of the equipments in the manufacturing workshop are
shown below:
51
52